OPUS 4 Latest Documents RSS Feed

In vivo selection of retroviral display libraries for tumor homing

Lydia Jasmin Dürner — Fri, 21 Sep 2012 09:24:19 +0200

The display of foreign polypeptides and proteins on the surface of viruses or cells provides an important tool for the engineering of biomolecules and the analysis of their interactions with binding partners. The most extensively used display platform is the coat protein of the filamentous bacteriophage (Smith, 1985). Phage display libraries have often been selected for polypeptides, e.g. single chain (sc) antibodies that bind to a protein of interest, but in vivo selection could only be demonstrated for peptides so far. An alternative display platform is the retrovirus murine leukemia virus (MLV). Here, polypeptides are displayed at the N-terminus of the viral envelope glycoprotein. Proof of principle for this platform was demonstrated for protease substrate libraries, which can be selected through coupling proteolytic activation with viral infectivity (Buchholz et al., 1998). Selection of the library CX4A on living cells resulted in viruses with more than three orders of magnitude improved spreading efficiency through tumor cells (Hartl et al., 2005). Also scAb libraries have recently been displayed and selected using retroviruses (Urban et al., 2005). The library scFvlibxMo displays the repertoire of phage display preselected sc antibodies for laminin-1 binding. The retrovirus based selection process resulted in laminin-specific sc antibodies with improved expression levels in mammalian cells. This thesis describes the in vivo (i.e. in mouse tumor models) selection of the C-X4-A and scFvlibxMo for tumor homing upon systemic delivery. For selection of the protease substrate library C-X4-A a subcutaneous tumor was induced in SCID mice followed by three systemic injections of the library. The selection process was monitored over a period of 34 days. After the incubation period mice were sacrificed and virus load in organs and tumor determined. PCR analysis after 34 days showed that virus from the library had preferentially infected the tumor. Sequence analysis showed the selection of protease substrates with the most prominent one with a frequency of over 65%. The four most prominent protease substrate variants where reconstituted into the original viral backbone for further investigation (C-SK-A, C-HI-A, C-HM-A and C-HS-A). Interestingly, these viruses exhibited a reduced spreading capacity in vitro on HT1080 cells as compared to the C-AK-A virus, which had previously been selected on HT1080 1 Summary 9 cells. When assayed for tumor homing, however, viruses C-HI-A and C-HS-A had clearly improved in comparison to C-AK-A. Tumor tissue had been infected at rates of over 55% while virus load of extratumoral organs was very low (infection rates <0.7 for C-HS-A and <0.02 for C-HI-A). Tumor targeting capacity had thus been improved over 10-fold by the in vivo selection of the C-X4-A library. The experimental set up for the in vivo selection of the scFvlibxMo library was performed according to that of the C-X4-A library. Fingerprint analysis of the selected viruses that infected tumor tissue resulted in the identification of seven antibody variants showing unique CDR3 sequences. Two prominent clones (M49T-A and M49T-B) were cloned back into the MoMLV genome for further analysis of the reconstituted viruses. While variant B bound laminin-1 efficiently, variant A was unable to do so, although it was selected at highest frequency (76%). Both reconstituted viruses were equally well infectious and spread through HT1080rec1 cells at a similar efficiency as MoMLV. In an in vivo competition experiment the selected viruses clearly out-competed a laminin-1 binding reference virus L36xMo for tumor homing. To understand the molecular driving forces behind the in vivo selection process the epitope of the selected scFv M49T-A was identified using a phage peptide library approach. In silico analysis led to the identification of a small group of possible antigens, including tenascin, fibronectin and collagen. The data described in this thesis demonstrate that the retrovirus display platform is capable of allowing the in vivo selection of protease substrates and scFvs. Notably, the replication competence of the system introduced an additional level of complexity to the library. The performed in vivo selections significantly enhanced tumor tropism. Selective infection of tumor cells combined with transfer of anti-tumoral genes is an attractive strategy for cancer therapy being in focus of current research. The viruses selected in this thesis build prime candidates for targeted retrovirus based tumor therapy.

Functional analysis of human transporter associated with antigen processing (TAP) and its modulation by lipids

Christian Schölz — Sun, 17 Jun 2012 12:30:40 +0200

The adaptive immune system of jawed vertebrates is based on recognition and elimination of cells that are either invaded by intracellular pathogens or malignantly transformed. One essential component of these processes is the cell surface presentation of antigenic peptides via major histocompatibility complex (MHC) class I molecules to cytotoxic T-cells (CTLs). Cells degrade defective ribosomal products and misfolded or unwanted proteins by the ubiquitin-proteasome pathway. The resulting degradation products are recognized and translocated by the transporter associated with antigen processing (TAP) into the endoplasmic reticulum (ER) lumen, where they are loaded onto MHC I molecules. Assembled peptide-MHC complexes are then shuttled by the secretory pathway to the cell surface for antigen presentation to CTLs, leading in the case of viral infection or malignant transformation to lysis and apoptosis of the target cell. Due to the fact that the TAP complex represents a key control point within the antigen presentation pathway, several viruses have evolved sophisticated strategies to evade immune surveillance by interfering with TAP function. Detailed studies of the TAP mechanism or its viral inhibition have been severely impeded by difficulties in expressing sufficient amounts of functional heterodimeric TAP complex. Thus, the overexpression of TAP in the methylotrophic yeast Pichia pastoris was established for functional analysis of this important ABC complex. Biomass production was scaled up by fermentation using classical batch and feed methods. Extensive screening of optimal solubilization and purification conditions allowed the isolation of the heterodimeric transport complex. Notably, only the very mild detergent digitonin preserved TAP function. Hereby, the optimal solubilization and purification strategy yielded in 30 mg TAP transporter per liter culture. Remarkably, the protein amount was 50-fold increased compared to previously described expression/purification in cultured insect cells. The high yield and quality of TAP produced in P. pastoris allowed an extensive analysis of substrate binding and transport kinetics of the transport complex in the membrane, its solubilized and purified state, as well as the reconstituted state. Thereby, a strong and direct effect of the lipid bilayer on ATP hydrolysis and peptide transport was discovered. These important results were extended further by successful functional reconstitution of the antigen translocation machinery in different lipid environments. For the first time, a stimulation of the transport activity by phosphatidylinositol (PI) and phosphatidylethanolamine (PE) was observed, whereas cholesterol was identified as an inhibitor of TAP activity. Purification of TAP and subsequent thin-layer chromatography (TLC)/liquid chromatography Fourier transform-mass spectrometry (LC FT-MS) fingerprinting of residual lipids exhibited specifically associated glycerophospholipids; mainly PC, PE, and PI species. Strikingly, these lipids not only represent the primary class of phospholipids of the ER but were also shown to be essential for functional reactivation of delipidated, and thus inactive, TAP. The results demonstrate that transport of antigenic peptides by the ABC transporter TAP strictly requires specific glycerophospholipids. In addition to the biochemical characterization of heterologous produced TAP, the soluble domain of the viral inhibitor US6 from human cytomegalovirus was expressed in E. coli. Optimization of the purification and refolding strategy yielded in functional protein, with a 35-fold increased protein amount compared to previous purification procedures. Protein activity was analyzed by specific inhibition of ATP binding to TAP. Furthermore, high protein yields allowed detailed investigation of TAP-dependent spatial and mechanistic separation of MHC I restricted cross-presentation in professional antigen presenting cells (pAPC).

First insights into the phosphorylation of Toc34 proteins

Mohamed Ibrahim — Thu, 14 Jun 2012 15:12:18 +0200

The translocation of nuclear-encoded precursor proteins into chloroplasts is a highly ordered process involving the action of several components to regulate this molecular ensemble. Not only GTP hydrolysis and GDP release but also the phosphorylation of TOC GTPases is a widely discussed mechanism to regulate protein import. The receptor component (Toc34) and its isoform of A. thaliana (atToc33) were found to be regulated by phosphorylation. Although the phosphorylation of Toc33 is already known for several years, several questions regarding the molecular components involved in the regulation of the phosphorylation process, precisely what is the protein kinase and where this kinase is initially localized, so far remained unclear. This thesis aimed at the defining of the phosphorylation status of TOC GTPases in monomeric and/or dimeric states, the identification of the nature of Toc33-PK (protein kinase), and in the same context it aimed at gaining first insights into the physiological significance of Toc33 phosphorylation. To this end, (I) An in vitro and in vivo system for investigating of TOC GTPases Phosphorylation (in monomeric or dimeric state) was developed. Since no information is available about the phosphorylation status of the Toc159 isoforms, the second receptor of the TOC complex, it was interesting to investigate whether these isoforms undergo phosphorylation or not. The results indicated that atToc159 isoforms are able to be phosphorylated by the kinase activity in purified outer envelope membranes (OEMs) of pea, but not atToc132. Moreover, an artificial dimer of psToc34 based on the interaction of a C-terminally fused leucine zipper was not phosphorylated. This result reflected the inability of the OEM kinase to phosphorylate the dimers of TOC GTPases. Also, In vivo labeling of atToc33 was developed and occurred in a dose-dependent manner. Therefore, this results evidenced that in vitro phosphorylation of atToc33 (both endogenous wild type and recombinant expressed proteins) is not artificial labeling but represents a physiological relevance. CD (circular dichroism) measurements revealed that recombinant GTPase domain of atToc33 is preferentially phosphorylated in its folded state. Therefore, it could be suggested that folding of atToc33rec is a prerequisite for its phosphorylation and the phosphorylation event occurs as a posttranslational modification most likely after insertion of Toc33 (Toc34) into the OE of chloroplasts. Secondly, (II) Isolation and identification of Toc33-PK from OEMs of chloroplasts was performed. Four independent strategies were developed to identify the Toc33-protein kinase: UV-induced and chemically-based crosslinking, different applied chromatographic techniques, identification of PK-Toc33 interaction by means of HDN-PAGE (histidine- and deoxycholate-based native PAGE), and finally mass spectrometric approaches were performed on fractions including the potential kinase activity. UV-induced crosslinking procedure was developed and resulted in covalent bonding of nine proteins to [a-32P] ATP, while chemically-based one was not significant. The applied chromatographic and HDN-PAGE approaches, including mass spectrometry, have revealed the identification of 13 protein kinases. Of these identified kinases, phototropin2 (Phot2, AT5G58140), leucine-rich repeat PK (LRR-PK, AT4G28650.1), and receptor-like transmembrane PK (RLK, AT5G56040.2) were selected as the most promising candidates (ca. kinase type and one transmembrane helix for membrane localization). (III) The physiological significance of Toc33 phosphoryation was shown to link this process with the environmental changes (especially, the light conditions). Identification of chloroplast OE-located PKs performed by nLC-MALDI-MS/MS resulted in the detection of Phot2. Furthermore, the subcellular localization of Phot2 in OEM of chloroplasts was confirmed by immunoblotting experiments using a-Phot2 antibody. The kinase activity of Phot2 towards TOC GTPases was characterized and revealed that fused GST-KD (kinase domain) protein able to specifically phosphorylate atToc33rec, but not atToc159rec. Also, endogenous atPhot2 was upregulated and heavily detected in the ppi1-S181A plant line (where serine to alanine exchange was performed to abolish the phosphorylation of atToc33). Hence, we suggested that certain signal cascades may directly or indirectly link Toc33 receptor phosphorylation, protein levels of Phot2 (as promising PK candidate), and irradiation conditions (as an inducing signal of the subsequent phosphorylation events). Light-dependent phosphorylation of Toc33 was shown either after de-etiolation conditions or after high light intensities of blue light was performed. Therefore, phosphorylation of Toc33 might be identified as an external regulatory signal to regulate preproteins import into chloroplasts in response to environmental conditions (e.g. light changes) or as a signal of chloroplast biogenesis.

Substrate binding does not only mean catalysis: internal regulation in the cytochrome bc1 complex from Paracoccus denitrificans

Michela Castellani — Wed, 17 Aug 2011 08:57:00 +0200

The ubiquinol:cytochrome c oxidoreductase is a key component of several aerobic respiratory chains in different organisms. It is an integral membrane protein complex, made up of three catalytic subunits (cytochrome b, cytochrome c1 and Rieske iron sulphur protein) and up to eight additional subunits in mitochondria. The complex oxidizes one quinol molecules and reduces two cytochrome c during the Q cycle, originally described by Peter Mitchell. Electrons are split between the low and the high potential chain and protons are released on the positive side of the membrane, increasing the protonmotive force needed by the ATP-synthase for energy transduction. The cytochrome bc1 complex from P. denitrificans is a perfect model for structural and functional studies. Bacteria are easy to grow and the genetic material is readily accessible for genetic manipulation. Moreover, the P. denitrificans aerobic respiratory chain is very close to the mitochondrial one: the complexes involved in electron transfer resemble the ones found in mitochondria, but lack most of the additional subunits. As a unique feature, P. denitrificans has a strongly acidic domain at the N-terminal region of the cytochrome c1, a sequence of 150 aminoacids which does not correlate with any known protein. An analogous composition can be found in the eukaryotic cytochrome bc1 complex as a part of an accessory subunit, proposed to be involved in facilitating electron transfer between the complex and the electron acceptor cytochrome c. In order to study the function of this domain in the P. denitrificans cytochrome bc1 complex, a deletion mutant has been previously cloned and modified with an affinity tag as a C-terminal extension of cytochrome b. The complex is purified by affinity chromatography and characterized by steady-state kinetics using not only horse heart cytochrome c but also the endogenous electron acceptor, the membrane bound cytochrome c552, employed here as a soluble fragment. Steady–state kinetics indicate that the deletion of the long acidic domain had effects neither on the turnover rate nor on the apparent affinity for the substrate. To understand wether the deletion affects the reaction between the cytochrome bc1 complex and the substrate, laser flash photolysis experiments are performed, showing that the interaction observed was not changed in the complex missing the acidic domain. The results presented in this work confirm the ones previously obtained by Julia Janzon using soluble fragments of the same interaction partners. The deletion, however, affected the oligomerization state of the complex, as shown by LILBID (Laser Induced Liquid Bead Ion Desorption) analysis. The wild type complex has a tetrameric structure, better described as a “dimer of dimers”. The deletion of the acidic domain on the cytochrome c1 results in the separation of the two dimers, yielding the canonical dimer. Therefore, the complex deleted in the acidic domain is used for cloning and expression of a heterodimeric complex, containing an inactivating mutation in the quinol oxidation site in only one monomer, thus allowing a selective switch-off for half the complex. Such a complex is needed for the verification of an internal regulation mechanism, the half-of-the-sites reactivity. According to it, the dimeric structure of the cytochrome bc1 complex has functional implications, since the two monomers can communicate and work in a coordinated manner. This approach confirms that substrate oxidation does effectively take place only in one of the two monomers constituting the dimer, and that the binding of substrate at the Qo and Qi site regulates the switch between active and inactive monomer. Moreover, this mechanism works also as an effective protection against the reaction of quinone intermediates with oxygen and the formation of reactive oxygen species (ROS), responsable for cellular aging. The motion of the ISP head domain is also addressed in this work; in particular the mechanism which regulates the movements towards the cytochrome c1 and the electron bifurcation at the quinol oxidation site. Laser flash kinetics in presence of several inhibitors and the substrate allow studying the response of the ISP to the binding of different species at the quinol oxidation site. The binding of ligand at the Qo site in the complex triggers the conformational switch in the ISP head domain, supporting the mechanism proposed in the literature according to which the Qo site is able to “sense” the presence of substrate and transfer the information to the ISP, regulating its mobility. The internal electron pathway between the ISP and the cytochrome c1 has been analyzed also by stopped-flow kinetics, in presence and absence of inhibitors. The results indicate that two kinetic phases describe the reduction of cytochrome c1 by the ISP, and a model for the simulation of the data is proposed.

Thermodynamic and kinetic characterisation of the interaction between mitochondrial cytochrome bc 1 complex and cytochrome c and implications for transient binding and electron transfer

Ajeeta Nyola — Fri, 24 Jun 2011 10:52:11 +0200

In mitochondrial respiration, the soluble protein cytochrome c accepts an electron from the membrane bound cytochrome bc1. The interaction between cytochrome bc1 and cytochrome c is highly transient in nature, enabling turnover numbers greater than 160 s-1. Yeast cytochrome bc1 has been successfully crystallised with bound cytochrome c with the help of an antibody fragment (Lange and Hunte 2002; Solmaz and Hunte 2008). In all crystal structures of the complex, the homodimeric cytochrome bc1 binds only one cytochrome c, with the binding site located on subunit cytochrome c1. Univalent cytochrome c binding is correlated with conformational changes of the Rieske protein head domain and subunit QCR6p. The interface of the complex is small. The haem moieties are centrally located in a mainly non-polar contact site that includes a cation–! interaction and is surrounded by complementary charged residues. The crystal structure is in agreement with the general architecture of the interfaces of transient redox complexes and also reveals several interesting features unique to the cytochrome bc1. On the basis of the crystal structures, an extensive thermodynamic and kinetic characterisation of the interaction was carried out in this work to challenge the static snapshot of the bound proteins in the crystal structure as the relevant physiological electron transfer. The thermodynamic parameters of the interaction between the redox partners were determined using isothermal titration calorimetry (ITC). The association constant for cytochrome bc1 and cytochrome c in oxidised state under physiological ionic strength of 120 mM at 25 °C, was determined to be 5 " 103 M-1 by direct ITC titration. So, the partners interact with an affinity of 200 #M. In spite of the low affinity the complex has a life time ($ = 1/koff) of 5 #second, sufficiently long to enable the theoretically calculated electron transfer rates of 1.0 " 106 to 2.6 " 107 s%1 with a lifetime ($ = 1/rate) of 1-0.04 μseconds and experimentally determined rate of 7.7 " 104 s%1 with a lifetime of 13 μseconds. The low affinity makes it difficult to ascertain the stoichiometry of binding. The enthalpy of the interaction is endothermic, which is consistent with the nature of an interface where hydrophobic interactions are dominant. The enthalpy and entropy is 3.6 kJmol-1 and 83 kJmol-1K-1, respectively. The importance of key interface residues was also investigated. The role of the interface residue G89 of cytochrome c which might have a role in the dissociation of the complex has been probed by site-directed mutagenesis. The interface contains a cation-! interaction between F230 of cytochrome bc1 and R19 of cytochrome c, which is thought to provide the specificity to the interaction between the otherwise promiscuous partners. To analyse the role of this interaction pair in electron transfer, F230L and F230W mutants were used to measure direct electron transfer rates by flash photolysis and steady state kinetics. The findings indicate that another ! system can work as functional substitution of F230, while deleting the ! system has a deleterious effect on the complex formation. The inability of F230L to achieve the transient and steady state turnover rates as wild type protein indicates a scenario where the variant achieves an altered bound state with inefficient electron transfer pathways and higher edge-to-edge distance. The role of supernumerary subunit QCR6p in complex formation was investigated by steady state kinetics measurements. Subunit QCR6p does not interact directly with cytochrome c but is positioned in such a way that it could electrostatically steer cytochrome c in a reactive ensemble. The highly acidic and disordered N-terminus of QCR6p could interact with a patch of conserved lysine residues on cytochrome c. The role of subunit QCR6p has been assessed using QCR6p deleted cytochrome bc1 and a lysine variant of cytochrome c. The results show that QCR6p not only affects the kinetics of the interaction but is also important for the stability of cytochrome bc1. The kinetic and thermodynamic data obtained during this study provide evidence for the functional importance of non-catalytic cytochrome bc1 subunit QCR6p, show that the entropy driven interaction is indeed of low affinity and highly transient in nature and indicate that the interface is well suited to ensure the high turnover of the electron transfer chain where cytochrome c interacts with multiple partners using overlapping interfaces. The suggested role of the cation-! interaction as a highly specific interaction has been validated.

Functional and structural studies on the Atmungsferment Cytochrome c oxidase from Paracoccus denitrificans

Heike Angerer — Mon, 07 Mar 2011 10:30:01 +0100

Cytochrome c oxidase (CcO), also called Complex IV of the aerobic respiratory chain, is located in the plasma membrane of prokaryotes and in the inner mitochondrial membrane of eukaryotes. The redox energy of dioxygen reduction is used to translocate protons across the membrane resulting in an electrochemical proton gradient. The generated proton gradient is exploited by the adenosine-5’-triphosphate synthase. In this work, bacterial four-subunit aa3-Type CcO from Paracoccus denitrificans (ATCC 13543, 4 SU-wt ATCC CcO) was used for analyses. 1) The recombinant homologously produced 4 SU-wt CcO (4 SU-wt rec CcO) was functionally compared with the native 4 SU-wt ATCC CcO. The 4 SU-wt rec CcO showed functional deficiencies as determined by UV-vis spectroscopy and electron paramagnetic resonance (EPR) studies. Total X-ray Reflection Fluorescence measurements show in both wild type CcOs the same ratio of the redoxactive Fe and Cu (2 Fe : 3 Cu) indicating full complement of the functional metals. If CcO contains only subunit I and II, it loses its functional integrity during continuous turnover activity. The importance of subunit III for integrity of CcO was demonstrated using 2 SU-wt rec CcO. Crystallisation trials of suicide inactivated 2 SU-wt rec CcOs have been ineffective using standard crystallisation conditions. Crystals of active 2 SU-wt rec CcO (positive control) have been obtained under these conditions and this result indicates possible structural changes in suicide inactivated 2 SU-wt rec CcO. The structure of active 2 SU-wt rec CcO was determined to 2.25 Å resolution. 2) Terminal oxidases require four electrons for the cleavage of the dioxygen bond (O=O). In general, the catalytic cycle of CcO is described by the electron input and thus by the different redox states of the metal centres: the O, E, R, P and F state. The two-electron reduced R intermediate is able to donate four electrons for dioxygen reduction forming the P state. The P intermediate is an oxoferryl state implying the lack of an electron for the R -> P transition, because the metal centres can only provide three electrons (Fe+II forms Fe+IV and Cu+II forms Cu+I). The P state, where the dioxygen bond is already broken, shows an oxoferryl state (FeIV=O2-) and a nearby tyrosine is proposed to form a tyrosyl radical representing the donor of the missing electron. H2O2-induced artificial intermediates provide the opportunity to investigated different catalytic intermediates in detail. Mixing equimolar amounts of H2O2 to CcO in the O state induces the "two-electron" reduced PH state at high pH and the electronically equal "two-electron" reduced F• H state at low pH. The addition of an excess amount of H2O2 leads to the three-electron reduced FH state. Functional studies using the 4 SU-wt ATCC CcO have demonstrated a bound peroxide (O- - O-) intermediate during the catalytic cycle. Using EPR it was previously shown that Y167 hosts a radical species in PH/F• H state which suggests that Y167 could provide this "missing electron". While X-ray structural models of CcO and Fourier-transformed infrared (FTIR) measurements of oxygenated ("pulsed") 4 SU-wt ATCC CcO suggest a bound peroxide in the O state, UV-vis and EPR spectroscopic studies indicate that other intermediates may also contain such peroxide species. Equimolar and excess amounts of H2O2 induce the PH/F• H and FH states, respectively and catalase treatment of the FH state leads, contrary to the natural direction of the catalytic cycle, to the apparent transition of the FH -> PH/F• H states, which is accompanied by reappearance of an EPR signal from the Y167• radical. The novel PFH/F• FH states are presented here and we postulate that the FH state hosts a superoxide (or peroxide) adduct at CuB in the binuclear site. In addition, the novel P10 state is also introduced having a maximum at lambda = 612 nm in the difference absorption spectrum (minus the O state). The P10 state is induced by mixing CcO in the O state with a pH 10 buffer. This pH 10 induced state resembles standard P states such as PCO, PH and PR. However, the P10 state evolves out of the O state without addition of reduction equivalents. Using EPR spectroscopy it was shown that Y167 hosts a radical species in the P10 state such as in the PH state. In summary, all functional data presented here provide evidence for a peroxide bound during the O state. Finally, a new model for the natural catalytic cycle is proposed. If the O state contains a peroxide, it is also likely that the E and R state contain this species. Even the oxoferryl intermediates P and F states may complex a peroxide at CuB in the binuclear site. 3) The amino acid residue Y167, which hosts the radical in the PH/F•H states, is not directly part of the binuclear site of CcO. For identification of the primary electron donor, two tryptophan variants of CcO, W272F and W164F, which are located nearby the binuclear site, were produced. Evidence is provided that W272 is a kinetically fast electron donor for the O2 molecule. The electron is replenished by Y167, or probably by Y280 in the natural cycle. The Y167 radical is detectable by EPR spectroscopy after treatment with equimolar amounts of H2O2 in the active variant W164F, but is absent in the inactive variant W272F. 4) CcO contains two proton conducting pathways, the D- and the K-pathway. Proteoliposomes of the variants H28A and D30N, mutations located at the entrance of the D-pathway, both show the identical proton pumping activity as the 4 SU-wt rec CcO (pumped H+/e- = 1). The variant N113D shows abolished proton pumping (pumped H+/e- = 0), but a relative high cytochrome c oxidation activity (63 %). G196D displays no cytochrome c oxidation and proton pumping activity. Overall, the addition or removal of a negative charge within the D-pathway such as in D124N, N131D, N113D and G196D leads to a decoupled phenotype indicating the high degree of electrostatic coupling in CcO.

Biochemical, structural and functional characterization of diheme-containing succinate:quinone reductase (SQR) from Bacillus licheniformis

M. Gregor Madej — Tue, 01 Mar 2011 09:37:20 +0100

Succinate:quinone oxidoreductases (SQORs) are integral membrane protein complexes, which couple the two-electron oxidation of succinate to fumarate (succinate → fumarate + 2H+ + 2e-) to the two-electron reduction of quinone to quinol (quinone + 2H+ + 2e- → quinol) as well as catalyzing the opposite reaction, the reduction of fumarate by quinol. In mitochondria and some aerobic bacteria, succinate:ubiquinone reductase, also known as complex II of the aerobic respiratory chain or as succinate dehydrogenase from the tricarboxylic acid (TCA or Krebs) cycle, catalyzes the oxidation of succinate by ubiquinone, which is mildly exergonic under standart conditions and not directly associated with energy storage in the form of a transmembrane electrochemical proton potential (Δp). Gram-positive bacteria do not contain ubiquinone but rather menaquinone, a quinone with significantly lower oxidation-reduction (“redox”) midpoint potential. In these cases, the catalyzed oxidation of succinate by quinone is endergonic under standard conditions. Consequently, these bacteria face a thermodynamic problem in supporting the catalysis of this reaction in vivo. Based on experimental evidence obtained on whole cells and purified membranes, it had previously been proposed that the SQR from Gram-positive bacteria supports this reaction at the expense of the protonmotive force, Δp. Nonetheless, it has been argued that the observed Δp dependence is not associated specifically with the activity of SQR because the occurrence of artifacts in experiments with bacterial membranes and whole cells can not be fully excluded. Clearly, definitive insight into the mechanism of catalysis of this intriguing reaction required a corresponding functional characterization of an isolated, membranebound SQR from a Gram-positive bacterium. The first aim of the present work addresses the question if the general feasibility of the energetically uphill electron transfer from succinate to menaquinone is associated specifically to a single enzyme complex, the SQR. The prerequisite to achieve this goal was stable preparation of this enzyme.

Crystallization and structural characterization of protein complexes involved in the energy metabolism of Yarrowia lipolytica

Blanka Wrzesniewska — Fri, 28 Jan 2011 16:51:00 +0100

1. Fab co-complexes of proton pumping NADH:ubiquinone oxidoreductase (complex I) Fab fragments suitable for co-crystallization with complex I were generated using an immobilized papainbased protocol. The binding of the antibody fragments to complex I was verified using Surface Plasmon Resonance and size exclusion chromatography. The binding constants of the antibodies and their respective Fab fragments were found to be in the nanomolar range. This work presents the first report on successful crystallization of complex I (proton pumping NADH:ubiquinone oxidoreductase) from Yarrowia lipolytica with proteolytic Fab fragments. The quality of the crystals was significantly improved when compared to the initial experiments and the best crystals diffracted X-rays to a resolution of ~7 Å. The activity of complex I remained uninfluenced by antibody fragment binding. The initial diffraction data suggest that the complex I/Fab co-complex crystals represent a space group different to the one observed for the native protein. Ongoing experiments are aimed at further enhancements of the diffraction quality of the crystals. Providing a different space group the CI/Fab co-complexes may become a very useful approach for structure determination of the enzyme. Moreover, the bound Fab offers an additional possibility to generate phase information. The antibody-mediated crystallization represents a valuable tool in structural characterization of the NADH:oxidoreductase subcomplexes or even single subunits. 2. UDP-glucose pyrophosphorylase UDP-glucose pyrophosphorylase from Yarrowia lipolytica displays affinity towards Ni2+ NTA and was first detected in a contaminated sample of complex I. Following, separation from complex I, Ugp1p was purified using anion exchange chromatography. Sequence similarity studies revealed high identity to other known pyrophosphorylases. As indicated by laser-based mass spectrometry method (LILBID) Ugp1p from Y. lipolytica builds octamers similarly to the enzyme from Saccharomyces cerevisiae. The initial crystals grew as thin needles favorably in sitting drop setups. The size of the crystals was increased by employment of a micro batch technique. The improved crystals diffracted X-rays to a resolution of 3.2 Å at the synchrotron beamline. Structural characterization is under way using a molecular replacement approach based on the published structure of baker’s yeast UGPase.

Heterologous production and characterization of selected secondary active transporters from the CDF, KUP, MOP, FNT, RhtB and SulP families

Devrishi Goswami — Fri, 19 Nov 2010 08:59:19 +0100

Genes coding for membrane proteins make up 25%-30% of the genome in most organisms. Membrane proteins play an important role in cell functioning and their importance is enhanced by the fact that a large number of drugs are targeted at membrane proteins. Paradoxically, experimentally determined structures of membrane protein correspond to only about 1.7% of protein structures deposited in the protein data bank (PDB). This is largely due to the fact that membrane proteins are difficult to deal with owing to their amphipathic nature. The low abundance of membrane proteins in native tissue makes heterologous overexpression of these genes a necessity. This thesis work aimed at heterologous production of several secondary active transporter proteins for structural and functional characterizations and establishing alternative strategies to overcome the obstacles associated with heterologous overproduction. Four members of the heavy metal transporting cation diffusion facilitator (CDF) family from S. typhimurium and A. aeolicus were heterologously overproduced in E. coli and functionally characterized by an in vivo complementation assay using the zinc transport deficient E. coli GG48 strain. Out of these four, Aq_2073 from A. aeolicus was produced in large scale with substantial yield and purity sufficient to carry out structural studies. After extensive stability studies with different detergents, pHs and temperatures, the protein was subjected to 3D and 2D crystallization trials. Several C- terminal truncated constructs were made and the simultaneous crystallization screenings were carried out. These resulted in initial needle like crystals in 3D crystallization trials or optimum sized vesicles with crystalline patches in 2D crystallization trials but no obvious crystal. The protein showed significant increase in melting temperature in the presence of cadmium, when tested by differential scanning calorimetry. Another transporter, STM3880 of the potassium uptake permease (KUP) family from S. typhimurium, was heterologously overproduced in E. coli, purified by affinity chromatography, reconstituted into artificial liposome and functionally characterized by solid supported membrane based electrophysiology. In order to establish alternative expression strategies, continuous exchange cell free expression (CECF) of proteins from four different families was carried out. This method found to be aptly complementing the cell-based production approach. Targets from resistance to homoserine/threonine (RhtB) family not expressing in vivo could be expressed and purified using CECF. STM1781 of the sulfate permease (SulP) family was expressed, purified and characterized for stability while the cell-based production resulted in extensive degradation. PF0780 of multidrug/oligosaccharidyllipid/polysaccharide flippase (MOP) family was also purified to homogeneity and the stability was comparable to in vivo produced protein. Moreover, the effect of maltose binding protein (MBP) fusion at N-terminus on production and membrane integration was tested with three selected targets. The analysis revealed decreased yields in the presence of MBP if the protein had both termini in the cytoplasm. This work succeed in heterologously overproducing and establishing purification protocols for several secondary active transporters aiming at structural and functional characterization in a structural genomics framework. It also showed that integration of alternative strategies, like employing both cell-based and cell-free heterologous expression systems, expands the overall expression space coverage and in turn increases the chance of success of a structural genomics styled project.

Functional and structural characterization of Aquifex aeolicus sulfide:quinone oxidoreductase

Marco Marcia — Wed, 29 Sep 2010 11:02:34 +0200

This work presents the first complete structure of the membrane protein sulfide:quinone oxidoreductase (SQR), obtained by X-ray crystallography. Its description is complemented by the results of biochemical and functional experiments. SQRs are ubiquitous flavoprotein disulfide reductases (FDRs), present in all domains of life, including in humans. Their physiological role extends from sulfide detoxification to sulfide-dependent respiration and photosynthesis (in archaea and bacteria), to heavy metal tolerance (in yeast) and possibly to sulfide signalling (in higher eukaryotes). Until now understanding the function of SQRs was difficult because of the poor level of sequence conservation in this enzyme family, the limited functional characterization available and the absence of any structural data. SQR was identified in the native membranes of the hyperthermophilic bacterium Aquifex aeolicus by peptide mass fingerprinting (PMF) and by a spectrophotometric activity assay. The protein was solubilized in the detergent dodecyl-beta-D-maltoside (DDM) and purified to homogeneity in a functionally active state. It binds one FAD molecule per protein monomer and FAD is its only cofactor. Its structure was determined in the “as-purified”, substrate-bound and inhibitor-bound forms at resolutions of 2.3, 2.0 and 2.9 Å, respectively. It is composed of two Rossmann-fold domains and of one membrane-attachment region. Despite the overall monomeric architecture being similar to that of FDRs, the structure reveals properties that had not been observed in FDRs until now and that have strong implications for the SQR catalytic mechanism. Surprisingly, A. aeolicus SQR is trimeric in the crystal structure and in solution, as determined by density-matched analytical ultracentrifugation, cross-linking and single particle electron microscopy. The trimer creates an appropriate surface for binding lipids and thus ensures that SQR exclusively reduces hydrophobic quinones. SQR inserts to a depth of about 12 Å into the membrane as an integral monotopic membrane protein. The interaction is mediated by an amphipathic helix-turn-helix tripodal motif and two lipid clamps. A channel in the membrane-binding domain extends towards the si-side of FAD and represents the quinone-binding site. The quinone ring is sandwiched between the conserved amino acids Phe 385 and Ile 346 and is possibly protonated upon reduction via Glu 318, Lys 382 and/or neighboring solvent molecules. Sulfide polymerization occurs on the re-side of FAD, where the highly conserved Cys 156 and Cys 347 appear to be covalently bound to the putative product of the reaction, a polysulfur chain which takes the form of an S8 ring in some monomers. Finally, the structure shows that FAD is covalently connected to the protein in an unprecedented way, via a putative disulfide bridge between the 8-methyl group of the isoalloxazine moiety and Cys 124. The high resolution insight into the protein and all unexpected structural observations presented in this work suggest that the catalytic mechanism of SQRs is significantly different from that of FDRs. In agreement with the structural and functional data, two reaction schemes are proposed for A. aeolicus SQR. They both provide a detailed description of how sulfide and quinones reach and bind the active site, how electrons are transferred from sulfide to quinone via FAD and how the elongating polysulfur product is attached to the polypeptide and is finally released. The two hypotheses differ in defining the structure of the covalent protein-FAD intermediate that forms during the reaction cycle and whose identity still remains experimentally undetermined. Remarkably, the structure of the active site and the FAD-binding mode of A. aeolicus SQR are not conserved in another SQR structure which also became available recently, that of the archaeon Acidianus ambivalens. The variability in SQRs suggests that not all of these enzymes follow the same catalytic mechanism, despite having been considered homologous. Consequently, the currently available but contradictory sequence-based classifications of the SQR family were revised. A structure-based alignment calculated on the increasing number of available sequences allowed to define new SQR groups and their characteristic sequence fingerprints in agreement with the reported structural and functional data. In conclusion, the results obtained in this work offer for the first time a detailed look into the intriguing but complicated reactions catalysed by SQRs and provide a stimulus for further genetic, biochemical and structural investigation.

Investigation of three accessory subunits of complex I from Yarrowia lipolytica

Krzysztof Dobrynin — Fri, 09 Jul 2010 09:14:03 +0200

The nicotinamide-adenine-dinucleotide (NADH):ubiquinone oxidoreductase (complex I) from the strictly aerobic yeast Y. lipolytica contains at least 26 “accessory” subunits however the significance of most of them remains unknown. The aim of this study was to characterize the role of three accessory subunits of complex I, recently identified: two mitochondrial acyl carrier proteins, ACPM1 and ACPM2 and a sulfurtransferase (st1) subunit. ACPMs are small (approx. 10 kDa) acidic proteins that are homologous to the corresponding central components of prokaryotic fatty acid synthase complexes. Genomic deletions of the two genes ACPM1 and ACPM2 resulted in strains that were not viable or retained only trace amounts of assembled mitochondrial complex I, respectively, as assessed using two-dimensional blue native/sodium dodecyl sulfate polyacrylamide gel electrophoresis (BN/SDS) PAGE. This suggested different functions for the two proteins that despite high similarity could not be complemented by the respective other homolog still expressed in the deletion strains. To test whether complex I was affected by deletion of the ACPM2 gene, its activities in mitochondrial membranes were measured. Consequently, specific inhibitor sensitive dNADH: decylubiquinone (DBQ) oxidoreductase activity was lost completely and a strong decrease in dNADH: hexa-ammine-ruthenium (HAR) oxidoreductase activity was measured. Remarkably, the same phenotypes were observed if just the conserved serine carrying the phosphopantethein moiety was exchanged with alanine. Although this suggested a functional link to the lipid metabolism of mitochondria, using HPLC chromatography no changes in the lipid composition of the organelles were found. Proteomic analysis revealed that both ACPMs were tightly bound to purified mitochondrial complex I. Western blot analysis revealed that the affinity tagged ACPM1 and ACPM2 proteins were exclusively detectable in mitochondrial membranes but not in the mitochondrial matrix as reported for other organisms. Hence it has been concluded that the ACPMs can serve all their possible functions in mitochondrial lipid metabolism and complex I assembly and stabilization as subunits bound to complex I. A protein exhibiting rhodanese (thiosulfate:cyanide sulfurtransferase) activity was found to be associated with homogenous preparation of complex I. From a rhodanese deletion strain, functional complex I that lacked the additional protein but was fully assembled and displayed no functional defects or changes in EPR signature was purified. In contrast to previous suggestions, this indicated that the sulfurtransferase associated with Y. lipolytica complex I is not required for assembly of its iron–sulfur clusters.

Structural rearrangements and subunit interactions in P2X receptors

Yogesh Bhargava — Thu, 17 Dec 2009 14:27:29 +0100

P2X receptors represent the third superfamily of ligand gated ion channels with ATP as their natural ligand. Most of the mammalian P2X receptors are non-selective cation channels, which upon activation, mediate membrane depolarization and have physiological roles ranging from fast excitatory synaptic transmission, modulation of pain-sensation, LTP to apoptosis etc. In spite of them being an attractive drug target, their potential as a drug target is limited by the lack of basic understanding of the structure-function relationship of these receptors. In my thesis, I have investigated the behavior of homomeric P2X receptor subunits with the help of photolabeling and fluorescence techniques coupled to electrophysiological measurements using Xenopus laevis oocytes heterologous expression system. Concurrent photolabeling by BzATP and current recordings from the same set of receptors in real time has revealed that the gating process in homomeric P2X receptors is contributed individually by each subunit in an additive manner. Our study for the first time describes the agonist potency of Alexa-ATP (a fluorescent ATP analog) on P2X1 receptors. The use of Alexa-ATP in our experiments elucidated that receptor subunits are not independent but interacting with each other in a cooperative manner. The type of cooperativity, however, depended on the type and concentrations of allosteric/competing ligands. Based on our results, in my thesis we propose an allosteric model for ligand-receptor interactions in P2X receptors. When simulated, the model could replicate our experimental findings thus, further validating our model. Further, correlation between occupancy of P2X1 receptors (determined using binding curve for Alexa-ATP) with the steady-state desensitization suggests that binding of three agonist molecules per receptor are required to desensitize P2X1 receptors. We further extended the approach of fluorescence with electrophysiological measurement to assign the role for different domains in P2X1 receptors with the help of environmental sensitive, cysteine reactive fluorophore (TMRM). Cysteine rich domain-1 of P2X1 receptors (C117-C165) was found to be involved in structural rearrangements after agonist and antagonist binding. In contrast to the present understanding, that the binding of an antagonist cannot induce desensitization in P2X1 receptors and the receptors need to open first before undergoing desensitization, we propose based on our results that a competitive antagonist can also induce desensitization in P2X1 receptors by bypassing the open state. We have attempted to answer few intriguing questions in the field of P2X receptor research and we think that our answers provide many avenues to the basic understanding of functioning of P2X receptors.

Targeted cell entry of lentiviral vectors

Sabrina Funke — Tue, 16 Jun 2009 10:57:29 +0200

Lentiviral vectors mediate gene transfer into dividing and most non-dividing cells. Thereby, they stably integrate the transgene into the host cell genome. For this reason, lentiviral vectors are a promising tool for gene therapy. However, safety and efficiency of lentiviral mediated gene transfer still needs to be optimised. Ideally, cell entry should be restricted to the cell population relevant for a particular therapeutic application. Furthermore, lentiviral vectors able to transduce quiescent lymphocytes are desirable. Although many approaches were followed to engineer retroviral envelope proteins, an effective and universally applicable system for retargeting of lentiviral cell entry is still not available. Just before the experimental work of this thesis was started, retargeting of measles virus (MV) cell entry was achieved. This virus has two types of envelope glycoproteins, the hemagglutinin (H) protein responsible for receptor recognition and the fusion (F) protein mediating membrane fusion. For retargeting, the H protein was mutated in its interaction sites for the native MV receptors and a ligand or a single-chain antibody (scAb) was fused to its ectodomain. It was hypothesised that the retargeting system of MV can be transferred to lentiviral vectors by pseudotyping human immunodeficiency virus-1 (HIV-1) derived vector particles with the MV glycoproteins. As the unmodified MV glycoproteins did not pseudotype HIV vectors, two F and 15 H protein variants carrying stepwise truncations or amino acid (aa) exchanges in their cytoplasmic tails were screened for their ability to form MV-HIV pseudotypes. The combinations Hcd18/Fcd30, Hcd19/Fcd30 and Hcd24+4A/Fcd30 led to most efficient pseudotype formation with titers above 10exp6 transducing units /ml, using concentrated particles. The F cytoplasmic tail was truncated by 30 aa and the H cytoplasmic tail was truncated by 18, 19 or 24 residues with four added alanines after the start methionine in the latter case. Western blot analysis indicated that particle incorporation of the MV glycoproteins was enhanced upon truncation of their cytoplasmic tails. With the MV-HIV vectors high titers on different cell lines expressing one or both MV receptors were obtained, whereas MV receptor-negative cells remained untransduced. Titers were enhanced using an optimal H to F plasmid ratio (1:7) during vector particle production. Based on the described pseudotyping with the MV glycoprotein variants, HIV vectors retargeted to the epidermal growth factor receptor (EGFR) or the B cell surface marker CD20 were generated. For the production of the retargeted vectors MVaEGFR-HIV and MVaCD20-HIV, Fcd30 together with a native receptor blind Hcd18 protein, displaying at its ectodomain either the ligand EGF or a scAb directed against CD20 were used. With these vectors, gene transfer into target receptor-positive cells was several orders of magnitude more efficient than into control cells. The almost complete absence of background transduction of non-target cells was e.g. demonstrated in mixed cell populations, where the CD20-targeting vector selectively eliminated CD20-positive cells upon suicide gene transfer. Remarkably, transduction of activated primary human CD20-positive B cells was much more efficient with the MVaCD20-HIV vector than with the standard pseudotype vector VSV-G-HIV. Even more surprisingly, MVaCD20-HIV vectors were able to transduce quiescent primary human B cells, which until then had been resistant towards lentiviral gene transfer. The most critical step during the production of MV-HIV pseudotypes was the identification of H cytoplasmic tail mutants that allowed pseudotyping while retaining the fusion helper function. In contrast to previously inefficient targeting strategies, the reason for the success of this novel targeting system must be based on the separation of the receptor recognition and fusion functions onto two different proteins. Furthermore, with the CD20-targeting vector transduction of quiescent B cells was demonstrated for the first time. Own data and literature data suggest that CD20 binding and hyper-cross-linking by the vector particles results in calcium influx and thus activation of quiescent B cells. Alternatively this feature may be based on a residual binding activity of the MV glycoproteins to the native MV receptors that is insufficient for entry but induces cytoskeleton rearrangements dissolving the post-entry block of HIV vectors. Hence, in this thesis efficient retargeting of lentiviral vectors and transduction of quiescent cells was combined. This novel targeting strategy should be easily adaptable to many other target molecules by extending the modified MV H protein with appropriate specific domains or scAbs. It should now be possible to tailor lentiviral vectors for highly selective gene transfer into any desired target cell population with an unprecedented degree of efficiency.

Mechanisms of energy transfer and conversion in plant light-harvesting complex II

Tiago Ferreira de Barros — Fri, 15 May 2009 09:33:17 +0200

The light-harvesting complex of photosystem II (LHC-II) is the major antenna complex in plant photosynthesis. It accounts for roughly 30% of the total protein in plant chloroplasts, which makes it arguably the most abundant membrane protein on Earth, and binds about half of plant chlorophyll (Chl). The complex assembles as a trimer in the thylakoid membrane and binds a total of 54 pigment molecules, including 24 Chl a, 18 Chl b, 6 lutein (Lut), 3 neoxanthin (Neo) and 3 violaxanthin (Vio). LHC-II has five key roles in plant photosynthesis. It: (1) harvests sunlight and transmits excitation energy to the reaction centres of photosystems II and I, (2) regulates the amount of excitation energy reaching each of the two photosystems, (3) has a structural role in the architecture of the photosynthetic supercomplexes, (4) contributes to the tight appression of thylakoid membranes in chloroplast grana, and (5) protects the photosynthetic apparatus from photo damage by non photochemical quenching (NPQ). A major fraction of NPQ is accounted for its energy-dependent component qE. Despite being critical for plant survival and having been studied for decades, the exact details of how excess absorbed light energy is dissipated under qE conditions remain enigmatic. Today it is accepted that qE is regulated by the magnitude of the pH gradient (ΔpH) across the thylakoid membrane. It is also well documented that the drop in pH in the thylakoid lumen during high-light conditions activates the enzyme violaxanthin de-epoxidase (VDE), which converts the carotenoid Vio into zeaxanthin (Zea) as part of the xanthophyll cycle. Additionally, studies with Arabidopsis mutants revealed that the photosystem II subunit PsbS is necessary for qE. How these physiological responses switch LHC-II from the active, energy transmitting to the quenched, energy-dissipating state, in which the solar energy is not transmitted to the photosystems but instead dissipated as heat, remains unclear and is the subject of this thesis. From the results obtained during this doctoral work, five main conclusions can be drawn concerning the mechanism of qE: 1. Substitution of Vio by Zea in LHC-II is not sufficient for efficient dissipation of excess excitation energy. 2. Aggregation quenching of LHC-II does not require Vio, Neo nor a specific Chl pair. 3. With one exception, the pigment structure in LHC-II is rigid. 4. The two X-ray structures of LHC-II show the same energy transmitting state of the complex. 5. Crystalline LHC-II resembles the complex in the thylakoid membrane. Models of the aggregation quenching mechanism in vitro and the qE mechanism in vivo are presented as a corollary of this doctoral work. LHC-II aggregation quenching in vitro is attributed to the formation of energy sinks on the periphery of LHC-II through random interaction with other trimers, free pigments or impurities. A similar but unrelated process is proposed to occur in the thylakoid membrane, by which excess excitation energy is dissipated upon specific interaction between LHC-II and a PsbS monomer carrying Zea. At the end of this thesis, an innovative experimental model for the analysis of all key aspects of qE is proposed in order to finally solve the qE enigma, one of the last unresolved problems in photosynthesis research.

Three-dimensional structure of the glycine-betaine transporter BetP by cryo electron crystallography

Ching-Ju Tsai — Tue, 23 Dec 2008 13:35:58 +0100

The soil bacterium Corynebacterium glutamicum has five secondary transporters for compatible solutes allowing it to cope with osmotic stress. The most abundant of them, the transporter BetP, performs a high affinity uptake of glycine-betain when encountering hyperosmotic stress. BetP belongs to the betaine/carnitine/choline/transporter (BCCT) family, and is predicted to have twelve transmembrane helices with both termini facing the cytoplasm. The goal of this thesis is to facilitate understanding of BetP function by determining a three dimensional (3D) model of its structure. Two-dimensional (2D) crystallization of wild-type (WT) BetP has been successfully performed by reconstitution into a mixture of E. coli lipids and bovine cardiolipin, which resulted in vesicular crystals diffracting to 7.5 Å resolution (Ziegler, Morbach et al. 2004). Diffraction patterns of these crystals however showed unfocused spots, generally due to high mosaicity. Better results were obtained by using the constitutively active mutant BetPdeltaC45 in which the first 45 amino acids of the positively charged C-terminus were removed. BetPdeltaC45 crystals obtained under the same conditions for BetP WT were concluded to be pseudo crystals, based on the inconsistence of symmetry. These crystals had BetPdeltaC45 molecules randomly up/downwards inserted into membrane crystals, and cannot be used for structure determination, even though they diffracted up to 7 Å. The problem of pseudo crystal formation could be solved by changing the lipids used for 2D crystallization to a native lipid extract from C. glutamicum cells. This change of lipids improved the crystals to well-ordered packing with exclusive p121_b symmetry. To understand the role of lipids in crystal packing and order, lipids were extracted at different stages during crystallization, and identified by using multiple precursor ion scanning mass spectrometry. The results show that phosphatidyl glycerol (PG) 16:0-18:1 is the most dominant lipid species in C. glutamicum membranes, and that BetP has a preference for the fatty acid moieties 16:0-18:1. Crystallization with synthetic PG 16:0-18:1 proved that an excess of this lipid prevents pseudo crystal formation, but these crystals did not reach the quality as previously achieved by using the C. glutamicum lipids. Apart from the effect of lipids in crystallinity, the concentration and type of salts influenced crystal growth and morphology. High salt conditions (>400 mM LiCl or KCl) yielded tubular crystals, whereas low salt conditions (<300 mM LiCl, NaCl or KCl) led to formation of up to 10 µm large sheet-like crystals. The intermediate concentration gave a mixture of sheet-like and tubular crystals. In terms of resolution, sheets diffracted better than tubes. The sheet-like crystals used for 3D map reconstruction were obtained from a dialysis buffer containing 200 mM NaCl combined with using C. glutamicum lipids. Electron microscopic images were taken from frozen-hydrated crystals using a helium-cooled JEOL 300 SFF microscope or a liquid nitrogen-cooled FEI Tecnai G2 microscope at 300 kV, which allowed optimal data collection and minimized radiation damage to the sample. More than 1000 images of tilt angles up to 50° were taken and evaluated using optical diffraction of a laser beam. The best 200 images were processed with the MRC image processing software package, and 79 images from different tilt angles were merged to the final data set used for calculation of a 3D map at a planar resolution of 8 Å. The structure shows BetPdeltaC45 as a trimer with each monomer consisting of 12 transmembrane alpha-helices. Protein termini and loop regions could not be determined due to the limited resolution of the map. Six of the twelve helices line a central cavity forming a potential substrate-binding chamber. Each monomer shows a central cavity in different sizes and shapes. Thus, the constitutively active BetPdeltaC45 thus forms an unusual asymmetric homotrimer. BetP most likely reflects three different conformational states of secondary transporters: the cytoplasmically open (C), the occluded (O), and the periplasmically open (P) states. The C and O states are similar to BetP WT projection structure, while the P state is discrepant and highly flexible due to the shape and size of the central cavity as well as the lowest intensity of the density. The observation of the P state corresponds well to the constitutively active property of BetPdeltaC45. For the high resolution structure of the C and O states are available, this work presents the first structural information of the P state of a secondary transporter.

Overexpression, biochemical characterization and crystallization of Chitin Synthase 2 from Saccharomyces cerevisiae

Fuensanta Wendolyne Martinez Rucobo — Mon, 17 Nov 2008 12:57:54 +0100

Life-threatening fungal infections are becoming increasingly common for immunocompromised patients such as those with AIDS, or those undergoing organ transplantation or chemotheraphy, as well as for other health-vulnerable patients. Excellent targets for antifungal drugs are chitin synthases, which are essential for survival of the fungus and lacking in humans. To design new antifungal drugs, knowledge of the three-dimensional structure and mechanism of action of chitin synthases are crucial. Chitin synthases are members of an important family of enzymes that synthesize structural polysaccharides, such as cellulose, β(1,3)-glucan, β(1,4)-mannan and hyaluronan. Therefore, chitin synthases could be used as a model system to understand these more complex enzymes, which are also of major medical and commercial importance. Chitin synthase 2 from Saccharomyces cerevisiae (ScChS2), the protein under study, is an integral membrane protein that synthesizes the primary septum between mother and daughter cells in budding yeast. It is essential for proper cell separation and expected to be highly regulated. An important aspect is that ScChS2 shows 55% sequence identity and is functionally analogous to chitin synthase 1 from the human opportunistic pathogen Candida albicans, this enzyme is also essential for cell survival (Munro, Winter et al. 2001). ...

Expression and characterization of P-type ATPases for structural studies

Sivaram Chandra Chintalapati — Wed, 26 Sep 2007 12:39:37 +0200

Two types of proteins transport ions across the membrane – ion channels and ion pumps. Ion pumps transport ions against their electrochemical gradient by co-transporting another ion or a substrate molecule through a concentration gradient or by coupling this process to an energy source like ATP. Those that couple ATP hydrolysis to ion transport are called ion motive ATPases and can be classified as ‘V’, ‘F’ and ‘P’ types. In this thesis, two sub-classes of P-type ATPases, PIIIA and PIB were studied. Attempts were made to over-express and crystallize the plant proton pump AHA2 (a PIIIA-ATPase). Also, the two putative copper transporting ATPases, CtrA3 (CopB-like) and CtrA2 (CopA-like) from Aquifex aeolicus (both PIB pumps) were over-expressed in E. coli and characterized. PIIIA-type pumps transport protons across the membrane and are found exclusively in plants and fungi, and probably some archaea. One of the most characterized proton pump biochemically is the A. thaliana proton pump AHA2. An 8Å projection map of this enzyme is already available (Jahn 2001). PIBATPases, also called CPX type pumps transport heavy metal ions such as Cu+, Cu2+, Zn2+, Pb2+, Cd2+, Co2+ across biological membranes and play an important role in homeostasis and biotolerance of these metals. CopA and CopB are two such proteins that transport copper across cell membrane found in many prokaryotes. CopB-like proteins are found almost exclusively in bacteria, with CPH sequence motif, while CopA-like proteins have CPC sequence motif, also found in eukaryotic copper transporters including human ATP7A and ATP7B. CopB extrudes Cu2+ across the membrane. CopA is activated by and transports Cu+ but the direction of transport is debated. Attempts were made to over-express the plant proton pump AHA2 in yeast Pichia pastoris. However, the yeast expressed only a truncated protein, which could not be used for further studies. It can be concluded that P. pastoris strain SMD1163 is not a good host for expression of AHA2. Focus was then shifted to AHA2 that has been over-expressed and purified from S. cerevisiae strain RS72. Growth and purification protocols had to be changed from published methods because of laboratory constraints and this probably had an effect on the protein produced. The protein purified from S. cerevisiae could not be crystallized reproducibly for structural studies by electron microscopy. CtrA3 was expressed in E. coli and purified using Ni2+-NTA matrix. Like CopB of A. fulgidus (Mana Capelli 2003), it was active only in the presence of Cu2+ and to some extent in Ag+. The protein was maximally active at 75°C, at pH 7 and in presence of cysteine. Lipids were essential for the activity of CtrA3. However, when the protein was purified in Cymal-6, CtrA3 could not hydrolyze ATP, even when lipids were added to the reaction mixture. For reconstitution of CtrA3 into liposomes for 2D crystallization, several lipids were tested. To screen the lipids compatible for protein incorporation, CtrA3 was dialyzed with different lipids at a high lipid-to-protein ratio of 10:1 and centrifuged by sucrose density gradient. Protein incorporated in lipids localized with liposome fraction in the gradient. Most of the CtrA3 was incorporated into DPPC with no aggregation. This lipid was used for reconstitution of CtrA3 at low LPRs, and at an LPR of 0.3-0.5, the protein formed 2D crystals. A NaCl concentration of 50mM was necessary for the formation of crystals. However, salt removal by dialysis prior to harvesting was essential for obtaining wellordered lattices of CtrA3. Addition of preservatives like trehalose and tannin or direct plunging in liquid ethane for cryo-microscopy destroyed the crystal lattice. Similar to CtrA3, the gene responsible for expression of CtrA2 was amplified from genomic DNA of A. aeolicus and expressed in E. coli and purified by Ni2+-NTA. Functional characterization of CtrA2 was done by analyzing ATP hydrolysis activity of the enzyme. Similar to CopA of A. fulgidus (Mandal 2002), CtrA2 was activated in the presence of Ag+ and to some extent, Cu+. It is possible that both the copper ATPases of A. aeolicus have different ion selectivity- CtrA3, specific for Cu2+ and CtrA2, specific for Cu+. Maximal activity of CtrA2 was also at 75°C. Cysteine was essential for activity of CtrA2, but the protein was not dependent on addition of lipids for activation. Reconstitution of CtrA2 was done similar to CtrA3 for screening of lipids for 2D crystallization. Of the lipids tested, DOPC reconstituted the protein best. However, screening at low LPRs did not yield any crystals. Even though both CtrA3 and CtrA2 are similar heavy metal transporting Ptype ATPases from the same organism and have 36% identity, they behaved completely different in their expression levels in E. coli, purification profiles, activity and reconstitution in lipids.

Production, biochemical characterization and preliminary structural studies of human Endothelin B receptor in its ligand-bound state

Ankita Srivastava — Fri, 21 Sep 2007 14:57:38 +0200

G-protein coupled receptors (GPCRs) comprise the largest superfamily of cell surface receptors and possess a signature motif of seven transmembrane helices. The endothelin B (ETB) receptor is a member of rhodopsin like GPCR family. It plays an important role in vasodilation and is found in the membranes of the endothelial cells enveloping blood vessels. Knowledge of the three-dimensional structure of G-protein coupled receptors in general would significantly add to our understanding of their molecular mechanisms and would be useful in the search for new specific drugs. However, three-dimensional structural analysis will require milligram quantities of pure and homogeneous protein. This dissertation is a study of the production, biochemical characterization and preliminary structural studies of the human ETB G-protein coupled receptor. The present work aimed at elucidating the structure and mechanistic details of function of the receptor by using a combination of X-ray crystallographic and NMR methods for collecting structural data. To obtain homogenous and monodisperse receptor protein preparation for structural and functional studies, we implemented the baculovirus expression system for the production of ETB receptor for the present work. The two step affinity purification ensured capture of full-length receptor. Silver stained SDS-PAGE of the purified receptor-ligand complex indicated greater than 90% protein purity. Based on previous reports, we used the high affinity ligand (endothelin -1) binding to the receptor for co-crystallization of receptor-ligand complex by locking the receptor in the activated conformation. As a prerequisite for 3D crystallization trials, the stability of the detergent solubilized receptor-ligand complex was assessed with respect to pH, temperature and time. Receptor-ligand complex did not show any degradation and aggregation over 6 days at 4°C and 18°C. Interestingly, change of pH suggested that receptor-ligand complex is unstable at lower pH due to possible charge induced conformational changes. In our work, we introduced the idea of using fluorophore labeled ligand for simple visual recognition of the receptor-ligand complex during purification and crystallization. On the other hand, we alternatively used biotinylated endothelin-1 to produce an adequate amount of ligand bound receptor complex, thus ensuring homogeneity of the purified complex for use in structural studies. Thus far, preliminary crystals have been obtained for both the unlabelled ET-1 and fluorophore labeled ET-1 complexed with ETB receptor. Moreover, we performed the systematic investigation of the protein/peptide binding partner for the receptor-ligand complex with the chief aims of stabilizing structure and increasing the possibilities of 3D-crystal contacts. Thus subsequent to formation of receptor-ligand complex, the additional in vitro formation of a ternary arrestin-receptor-ligand complex was also attempted for use in structural studies. We successfully demonstrated that arrestin mutant (R169E) forms a tight complex with ETB receptor regardless of its phosphorylation state. A second approach to get insight into the ETB receptor ligand binding site relied on the use of spin isotope labeled ET-1 ligand peptide by employing solid state MAS NMR method. Preliminary data provided compelling evidence that the C-terminal region of the peptide is immobilized in an ordered environment and presumably bound to the receptor. This indicates that the approach is feasible, although there are difficulties in sample preparation for further spectral measurements and data collection which are currently being discussed in ongoing investigations. At this point of our research work, we initiated a collaborative effort to obtain high yields of pure, active receptor without post translational modifications, from an E. coli cell lysate based in vitro expression system. We successfully optimized the production of homogenous and monodisperse endothelin B receptor in mg amounts. Thus this could potentially provide an alternative source of high quality receptor production in large quantities for immediate crystallization trials. Thus we hope that the results from these investigations can be applied in a more general sense to the production and crystallization of other G protein-coupled receptors.

Establishment of an Escherichia coli cell-free expression system for thelarge scale production of selected membrane proteins

Shweta Tiwar — Fri, 13 Jul 2007 09:01:07 +0200

Membrane proteins play vital role in a variety of cellular processes, such as signal transduction, transport and recognition. In turn they are involved in numerous human diseases and currently represent one of the most prevalent drug targets. A comprehensive understanding of the mechanisms mediated by membrane proteins requires information about their structures at near-atomic resolution, although structural studies of membrane proteins remain behind those of soluble proteins. A bottleneck in the study of membrane proteins resides in the difficulties that are encountered during their high-level production in cell based systems. However, many toxic effects attributed to the over production of membrane proteins are eliminated by cell-free expression, as viable host cells are no longer required. Therefore, the objective of this study was to obtain adequate amounts of selected membrane transport proteins for their structural studies using a cell-free expression system. For the establishment of the cell-free system for membrane proteins, the transporters YbgR and YiiP from Salmonella typhimurium LT2, PF0558 and PF1373 from Pyrococcus furiosus, from the cation diffusion family (CDF), BetP from Corynebacterium glutamicum from the betaine/carnitine/choline transporter (BCCT) family and Aq-2030 from Aquifex aeolicus VF5 from the monovalent cation/proton antiporter-2 (CPA2) family were selected. An Escherichia coli S-30 extract based cellfree system was established by generating the best expression constructs of the target proteins, preparing T7 RNA polymerase and an S-30 extract with high translation efficiency. The functionality of the S-30 extract was shown by the cell-free expression of correctly folded Green Fluorescent Protein (GFP). Essential factors of the cell-free system such as the Mg2+ concentration, the bacterial S-30 extract proportion in the reaction mixture and the time-course of cell-free reactions have been optimized. For the cell-free production of membrane proteins in soluble form, the possibility to supplement cell-free reactions with detergents was explored. A wide range of non-ionic or zwitterionic detergents, were found to be compatible with cell-free synthesis, while ionic detergents and non-ionic detergents at high concentrations had an inhibitory effect. Moreover, high concentrations of polyoxyethylene-alkyl-ethers (Brij) detergents were found to have enhancing effect on the production levels as well as on the solubility of cell-free produced proteins. As membrane proteins tend to misfold and aggregate in a membrane-free translation system, the possibility to supplement the cell-free reactions with inner membrane vesicles (IMVs) to obtain correctly folded target transport proteins was explored. All the target proteins were successfully produced in the batch cell-free reactions and were found to be incorporated in the IMVs. A continuous exchange cell-free (CECF) system was established, where consumable substrates (amino acids, nucleotides and energy regenerating compounds) were supplied to the cell-free reaction mixture through a dialysis membrane, which in consequence resulted in high-level production of target proteins compared to the batch system. The osmosensing and osmoregulated sodium-coupled symporter BetP from C. glutamicum was chosen for the large scale production in CECF set-up. The protein is easily produced in E. coli and is functional as assayed by its transport activity, after purification and reconstitution in liposomes. It is therefore possible to compare in-vivo and cell-free production. High-level cell-free production of BetP was achieved in CECF mode in different forms: (i) as precipitate, (ii) as soluble form in detergent, and (iii) incorporated in IMVs. Cell-free production of BetP resulted in the yield of about 0.5 mg of purified BetP from 1 ml of CECF reaction. The yield of purified BetP was increased to 1.6 fold by addition of 1% polyoxyethylene-(20)-cetyl-ether (Brij58) detergent in the reaction mixture. Moreover, the high level cell-free production of BetP (0.5 mg purified BetP/ml reaction mixture) incorporated in IMVs was shown for the first time in this work.However, it was observed that oligomerization of BetP was not efficient in the cell-free system. Factors that can promote the folding of membrane proteins such as lipids and chaperones were investigated. Addition of lipids and molecular chaperone GroE facilitated correct folding of BetP resulting in increased yield and stability of cell-free produced BetP. The results obtained indicate that most of the cell-free produced BetP exists in functional oligomeric form. The possibility of obtaining milligram amounts of BetP, a 12 trans-membrane protein from the cell-free reactions holds promise for structural and functional studies of other membrane proteins. In any case, the strategies adapted in this study should prove extremely valuable for the production of membrane proteins in the E. coli cell-free expression system.

Production of the human adenosine A2A receptor in Pichia pastoris, its solubilization and purification, and the selection of a specific single-chain Fv fragment by phage display

Cécile Prual — Tue, 19 Jun 2007 09:18:25 +0200

G protein-coupled receptors (GPCRs) comprise the largest membrane protein family and play an essential role in signal transduction through the cell membrane. They are currently the targets of approximately 50 % of the pharmaceuticals on the market (Klabunde and Hessler, 2002). However, only one high-resolution GPCR structure has been determined up to now, that of bovine rhodopsin (Palczewski et al., 2000). The GPCR activation and regulation mechanisms are still unknown and other GPCR structures are thus required. MePNet (Membrane Protein Network) was a European consortium dedicated to structural studies of GPCRs. The approach was to produce 100 GPCRs in three expression systems (Escherichia coli, Pichia pastoris and Semliki Forest Virus infected mammalian cells) in order to select at each step of the process (production, solubilization, purification) the constructs that fulfilled quantity and quality (functionality) requirements for crystallization trials. In our team, we screened 38 of the 100 targets in P. pastoris. For each receptor, the clone with the highest production level was identified by dot-blot. The size and homogeneity of each receptor were then analyzed by Western-blot. The human adenosine A2A receptor showed a well-defined and pronounced single band and was thus selected for further characterization. The adenosine A2A receptor is a GPCR mainly localized in the central nervous system and, as it antagonizes dopaminergic activity, it has great potential as a drug target for the treatment of Parkinson’s disease. Functional characterization by binding assays with the specific antagonist [3H]-ZM241385 demonstrated a Bmax of 56 +/- 3 pmol/mg i.e. pmol of binder per milligram of total membrane protein, and a KD of 0.40 +/- 0.02 nM. Receptor production was then improved by lowering the induction temperature, decreasing the induction time and adding DMSO to the medium. For large-scale production, fermention reached around 300 g cells (wet weight)/L culture, which provided 43 mg of functional receptor in membranes per liter of culture. Functional solubilization was achieved with dodecyl-β-D-maltoside and the soluble yield was increased to 70-80 % of the membrane content by addition of cholesteryl hemisuccinate and increasing the ionic strength. The receptor was successfully purified via Ni-NTA and monomeric avidin chromatography in the presence of the antagonist ZM241385. This strategy produced a pure, homogeneous and stable receptor preparation with functionality demonstrated by radioligand binding assays. The total receptor yield after purification was routinely around 20 % of the membrane functional receptor content and 2 g of membranes provided 4 mg of pure receptor for crystallization trials. GPCRs are very difficult targets for crystallization, and co-crystallization with antibody fragments has been shown to be a successful method for crystallization of membrane proteins. In order to develop such a tool for the adenosine A2A receptor, a single-chain Fv (scFv) fragment specific to the purified receptor was selected by phage display. The receptor was functionally immobilized on the surface of streptavidin beads and after two rounds of selection, 6 different phages were identified several times. After production in E. coli and purification via Ni-NTA affinity chromatography, 4 out of the 6 scFv fragments were sufficiently enriched to be tested by ELISA. For the ELISA, the receptor was functionally immobilized via the biotinylation domain of the construct in a 96-well streptavidin-coated plate. The antibody fragments binding to the receptor were identified based on interaction with HRP-conjugated protein L. One scFv fragment gave a positive ELISA signal 10 fold above background and titration of the scFv fragment binding to the receptor was specific and saturable. However no complex of scFv fragment and receptor was observed on gel filtration. In order to have a more sensitive detection method, the scFv fragment was labeled with fluorescein: a complex was then observed up on gel filtration but the binding appeared to be non-specific. A pull-down assay with immobilized non-labeled scFv fragment finally confirmed the specificity of the binding, but also the low affinity of the interaction. Affinity maturation of this specific scFv fragment by a random mutagenesis and selection process should improve this parameter in order to obtain an adapted tool for co-crystallization.

Association of bacterial respiratory complexes

Mohd Khalid Siddiqui — Mon, 15 Jan 2007 08:56:49 +0100

The mitochondrial respiratory chain consists of NADH:ubiquinone oxidoreductase (Complex-I), succinate:ubiquinone reductase (Complex-II), ubiquinol:cytochrome c reductase (Complex-III), cytochrome c oxidase (Complex-IV) and cytochrome c as an electron mediator between Complex-III and Complex-IV. Paracoccus denitrificans membranes were used as a model system for the association of the mitochondrial respiratory chain. More than 50 years ago, a model was given for a supercomplex assembly formed by stable associations between these complexes. This model gradually shifted by the model of random diffusion given by Hackenbrock et al. 1986 Different independent approaches were used to further analyze this situation in a native membrane environment, thus avoiding any perturbation caused by detergent solubilization: (a) measuring the distance and orientation of the different complexes by multi-frequency EPR Spectroscopy we started to analyze simple system, the interaction between CuA fragment derived from P. denitrificans and various c type cytochrome by Pulsed X band and G band (180 GHz) EPR. Partner proteins for the CuA (excess negative surface charge) were (i) horse heart cytochrome c which contain a large number of positive charges in heme crevice,(ii) the cytochrome c552 soluble fragment (physiological electron donor and have positive charges), and as a control (iii) the cytochrome c1 soluble fragment (negative surface potential, derived from bc1 complex) The measurements were performed at several magnetic field positions varying temperature between 5 to 30 K. Both the X band and the high-field measurements show the existence of a strong relaxation enhancement of the CuA by the specific binding of the P. denitrificans cytochrome c552 and horse heart cytochrome c. This relaxation enhancement is dependent on temperature and provides information about the distance and relative orientation of the two interacting spins within this protein-protein complex. (b) For quantitative information about lateral diffusion of cytochrome c oxidase in the native membrane Fluorescence Correlation Spectroscopy (FCS) was used. In this experiment, diffusion coefficients for oxidase differ in the case of supercomplex for wild type membrane and for two deletion mutants lacking either Complex-I or Complex-III. (c) The optical absorption spectroscopy at microsecond level resolution was tried for the translational mobility of oxidase in membrane vesicles. Due to the presence of different hemes in the native membrane, carbon monoxide (CO) used as a probe for the experiment. The optimization of the experimental conditions were carried out to get the optimal signal.

Funktionelle Charakterisierung der C-terminalen-Domänen des Korepressors N-CoR

Miryam Ducasse — Fri, 22 Dec 2006 08:19:46 +0100

Although in general cells are genetically identical in multicellular organisms, the differential expression of genomic information enables cell type definition and specific organ function. In eukaryotic cells, the DNA is associated with histone and non-histones proteins into a restrictive structure called chromatin. Assembly into chromatin does not only protect and package the linear double stranded DNA into the nucleus but is fundamental for the execution of diverse genetic programs. Posttranslational modifications of histones regulate the accessibility of the DNA to transcription factors and serve as scaffold for binding of regulatory proteins. Nuclear receptors are transcription factors that bind specific target sequences on the DNA and recruit transcriptional coregulators at the promoter. These are able to modify the chromatin structure in an activating or repressing manner. The contribution of corepressors to the biological actions of nuclear receptors has turned out to be essential. Impaired corepressor function can be the cause of endocrine malfunctions, neoplastic diseases or severe developmental abnormalities. To better understand the role of the nuclear receptor corepressor N-CoR the unknown function of the extreme C-terminus was investigated. In this thesis the interaction of N-CoR with the non-POU-domain containing octamer-binding protein Non0/p54nrb, that was found tobe a potential interaction partner in a yeast-two-hybrid screen, was confirmed. This protein contains two RNA recognition motifs (RRM) and is described as a multifunctional protein since it is involved in transcription Initiation as well as in pre-mRNA processing. The RRM1 motif was determined to be essential and sufficient for the interaction with N-CoR. Obtaining dominant negative effect with the Non0/p54nrb RRM1 deletion mutant in functional reporter assays, data support that NonO modulates the capacity of N-CoR to repress and alters the recruitment of N-CoR by nuclear receptors to targeted Promoters. Additional analyses suggest that the N- and C- terminus of N-CoR are involved in intramolecular interactions and that they regulate each other. Taken results together a functional model is proposed that supports the biological relevance of the interaction of N-CoR with NonO and the function of N-CoR C-terminus acting as asensor that evaluates the ratio of corepressors and coactivators in the nuclear receptor environment. N-CoR repressive capacity would be altered by modulating factors like NonO that interacts with N-CoR C-terminus. The mechanism support that splicing and transcription regulation are physically and functionallylinked to ensure the appropriate amount of messager RNA to be transcript and process in response to stimulation intensity and cell context.

The interaction of the cytochrome bc 1 complex with its substrate cytochrome c : high resolution structure and implications for transient binding

Sozanne Solmaz — Tue, 01 Aug 2006 10:00:07 +0200

Structural studies of membrane transport proteins

Vinothkumar Kutti Ragunath — Mon, 16 Jan 2006 14:56:54 +0100

My graduate thesis is on the “ Structural studies of membrane transport proteins”. Transporters are membrane proteins that have multiple membrane-spanning a-helices. They are dynamic and diverse proteins, undergoing a large conformational change and transporting wide range of susbtrates. Based on their energy source they can be classified into primary and secondary transport systems. Primary transport systems are driven by the use of chemical (ATP) or light energy, while secondary transporters utilize ion gradients to transport substrates. I began my PhD dissertation on secondary transporters by two-dimensional crystallization and electron crystallographic analysis and recently my focus also has shifted towards 3D crystallization. The following projects constitute my PhD thesis: 1) 2D crystallization of MjNhaP1 and pH induced structural change: MjNhaP1, a Na+/H+ antiporter that is regulated by pH has been implicated in homeostasis of H+ and Na+ in Methanococcus jannaschii, a hyperthermophilic archaeon that grows optimally at 85°C. MjNhaP1 was cloned and expressed in E. coli. Two-dimensional crystals were obtained from purified protein at pH4. Electron cryo-microscopy yielded an 8Å projection map. The map of MjNhaP1 shows elongated densities in the centre of the dimer and a cluster of density peaks on either side of the dimer core, indicative of a bundle of 4-6 membrane-spanning helices. The effect of pH on the structure of MjNhaP1was studied in situ in 2D crystals revealing a major change in density within the helix bundle relative to the dimer interface. This change occurred at pH6 and above. The two conformations at low and high pH most likely represent the closed and open states of the antiporter, respectively. This is the first instance where a conformational change associated with the regulation of a secondary transporter appears to map structurally. Reconstruction of 3D map and high-resolution structure by x-ray crystallography would be necessary to understand the mechanism of ion transport and regulation by pH. 2) 2D crystallization of Proline transporter: Proline transporter (PutP) from E.coli belongs the sodium-solute symporter family that includes disease related sodium dependent glucose and iodide transporter in humans. Sodium and proline are co-transported with a stoichiometry of 1:1. Purified PutP was reconstituted to yield 2D crystals that were hexagonal in nature. The 2D crystals had tendency to stack indicating their willingness to form 3D crystals. A projection map of PutP from negatively stained crystals showed trimeric arrangement of protein. Other members of the SSF family have been shown to be monomers. My analysis of oligomeric state of PutP in detergent by blue native gel indicates a monomer in detergent solution. It is likely that PutP can function as a monomer but at higher concentration and in lipid bilayer it tends to form trimer. 3) Oligomeric state and crystallization of carnitine transporter from E.coli: E.coli carnitine transporter (CaiT) belongs to the BCCT (Betaine, Carnitine and Choline) superfamily that transports molecules with quaternary amine groups. CaiT is predicted to span the membrane 12 times and acts as a L-carnitine/g-butyrobetaine exchanger. Unlike other members in this transporter family, it does not require an ion gradient and does not respond to osmotic stress. Over-expression of the protein yielded ~2mg of protein/L of culture. The structure and oligomeric state of the protein were analyzed in detergent and lipid bilayers. Blue native gel electrophoresis indicated that CaiT was a trimer in detergent solution. Gel filtration and cross-linking studies further support this. Reconstitution of CaiT into lipid bilayers resulted in 2D crystals. Analysis of negatively stained 2D crystals confirmed that CaiT is a trimer in the membrane. Initial 3D crystallization trials have been successful and currently, the crystals diffract to 6Å and are being improved. 4) Monomeric porin OmpG: OmpG is a bacterial outer membrane b-barrel protein. It is monomeric and its size (33kDa) places it as a prime candidate for a structural solution, using the recently developed method of solid state NMR (work in collaboration with Prof.Hartmut Oskinat, FMP, Berlin). A long-term aim would be to study porins as templates for designing nanopores, for DNA sequencing and identification. I have expressed OmpG in inclusion bodies and refolded at an efficiency of >90% into a functional form using detergent. OmpG was then crystallized by 2D crystallization yielding an 8Å projection map whose structure was similar to native protein. In addition, these crystals were used for structure determination by solid state NMR. An initial spectrum of heavy isotopically labeled OmpG has allowed identification of specific amino acid residues including threonine and proline. Additionally, I obtained 3D crystals in detergent that diffract to 5.5Å and are being improved.

Accessory subunits of complex I from Yarrowia lipolytica

Albina Abdrakhmanova — Fri, 02 Dec 2005 10:01:56 +0100

Mitochondial NADH:ubiquinone oxidoreductase (complex I) the largest multiprotein enzyme of the respiratory chain, catalyses the transfer of two electrons from NADH to ubiquinone, coupled to the translocation of four protons across the membrane. In addition to the 14 strictly conserved central subunits it contains a variable number of accessory subunits. At present, the best characterized enzyme is complex I from bovine heart with a molecular mass of about 980 kDa and 32 accessory proteins. In this study, the subunit composition of mitochondrial complex I from the aerobic yeast Y. lipolytica has been analysed by a combination of proteomic and genomic approaches. The sequences of 37 complex I subunits were identified. The sum of their individual molecular masses (about 930 kDa) was consistent with the native molecular weight of approximately 900 kDa for Y. lipolytica complex I obtained by BN-PAGE. A genomic analysis with Y. lipolytica and other eukaryotic databases to search for homologues of complex I subunits revealed 31 conserved proteins among the examined species. A novel protein named “X” was found in purified Y. lipolytica complex I by MALDI-MS. This protein exhibits homology to the thiosulfate sulfurtransferase enzyme referred to as rhodanese. The finding of a rhodanese-like protein in isolated complex I of Y. lipolytica allows to assume a special regulatory mechanism of complex I activity through control of the status of its iron-sulfur clusters. The second part of this study was aimed at investigating the possible role of one of these extra subunits, 39 kDa (NUEM) subunit which is related to the SDRs-enzyme family. The members of this family function in different redox and isomerization reactions and contain a conserved NAD(P)H-binding site. It was proposed that the 39 kDa subunit may be involved in a biosynthetic pathway, but the role of this subunit in complex I is unknown. In contrast to the situation in N. crassa, deletion of the 39 kDa encoding gene in Y. lipolytica led to the absence of fully assembled complex I. This result might indicate a different pathway of complex I assembly in both organisms. Several site-directed mutations were generated in the nucleotide binding motif. These had either no effect on enzyme activity and NADPH binding, or prevented complex I assembly. Mutations of arginine-65 that is located at the end of the second b-strand and responsible for selective interaction with the 2’-phosphate group of NADPH retained complex I activity in mitochondrial membranes but the affinity for the cofactor was markedly decreased. Purification of complex I from mutants resulted in decrease or loss of ubiquinone reductase activity. It is very likely that replacement of R65 not only led to a decrease in affinity for NADPH but also caused instability of the enzyme due to steric changes in the 39 kDa subunit. These data indicate that NADPH bound to the 39 kDa subunit (NUEM) is not essential for complex I activity, but probably involved in complex I assembly in Y. lipolytica.