Refine
Year of publication
- 2015 (24) (remove)
Document Type
- Doctoral Thesis (24) (remove)
Has Fulltext
- yes (24)
Is part of the Bibliography
- no (24)
Keywords
- 325 MHz (1)
- Absolutkonfiguration (1)
- Beschleuniger (1)
- CH-Struktur (1)
- Chiralität (1)
- Coltrims (1)
- Coulomb Explosion Imaging (1)
- Deuteronen (1)
- FRANZ-Projekt (1)
- Hochstrom-Ionenquelle (1)
Institute
- Physik (24) (remove)
Ziel der vorliegenden Arbeit ist der Aufbau von koaxialen Plasmabeschleunigern und deren Verwendung für die Untersuchung der Eigenschaften von kollidierenden Plasmen. Zukünftig sollen diese kollidierenden Plasmen als intensive Strahlungsquelle im Bereich der ultravioletten (UV-) und vakuumultravioletten (VUV-)Strahlung sowie in der Grundlagenforschung als Target zur Ionenstrahl-Plasma-Wechselwirkung Verwendung finden. Für diese Anwendungen steht dabei eine Betrachtung der physikalischen Grundlagen im Vordergrund. So sind neben der Kenntnis der Plasmadynamik auch Aussagen bezüglich der Elektronendichte, der Elektronentemperatur und der Strahlungsintensität von Bedeutung. Im Einzelnen konnte gezeigt werden, dass es möglich ist, durch eine Plasmakollision die Elektronendichte des Plasmas im Vergleich zu der eines einzelnen Plasmas deutlich zu erhöhen - im Maximalfall um den Faktor vier. Gleichzeitig stieg durch die Plasmakollision die Lichtintensität im Wellenlängenbereich der UV- und VUV-Strahlung um den Faktor drei an...
Measurements of the transverse momentum (pt) spectra of K0 s and Λ(Λ̄) in Pb–Pb and pp collisions at √sNN = 2.76TeV with the ALICE detector at the LHC at CERN up to pt = 20GeV/c and pt = 16GeV/c, respectively, are presented in this thesis. In addition, the particle rapidity densities at mid-rapidity and nuclear modification factors of K0 s and Λ(Λ̄) are shown and discussed. The analysis was performed using the Pb–Pb data set from 2010 and the pp data set from 2011. For the identification of K0 s and Λ(Λ̄), the on-the-fly V0 finder was employed on tracking information from the TPC and ITS detectors. The Λ and Λ̄ spectra were feed-down corrected using the measured published Ξ− spectra as input.
Regarding the rapidity density at mid-rapidity, a suppression of the strange particle production in pp as compared to Pb–Pb collisions is observed at all centralities, whereas the production per pion rapidity density stays constant as a function of dNch/dη including both systems. Furthermore, the relative increase of the individual particle species in pp and AA collisions is compatible for non- and single-strange particles when going from RHIC (√sNN = 0.2TeV) to LHC energies. On the other hand, in case of multi-strange baryons, a stronger increase in the particle production in pp is seen. The Λ̄ and Λ production in Pb–Pb and pp collisions was found to be equal. Concerning the nuclear modification factors, at lower pt (pt <5GeV/c), an enhancement of the RAA of Λ with respect to that of K0 s and charged hadrons is observed. This baryon-to-meson enhancement appearing in central Pb–Pb collisions at RHIC and LHC is currently explained by the interplay of the radial flow and recombination as the dominant particle production mechanism in this pt sector. The effect of radial flow is thus also seen in the low and intermediate pt region of RAA, where a mass hierarchy is discovered among the baryons and mesons, respectively, with the heaviest particle being least suppressed. When comparing the results from RHIC and LHC, the RCP is found to be similar at low-to-intermediate pt, while a significantly smaller RAA of K0 s and Λ in central and peripheral events at the LHC is observed in this pt region as compared to the RHIC results. This can be attributed to the larger radial flow in AA collisions and to the harder spectra at the LHC. At high pt (pt > 8GeV/c), a strong suppression in central Pb–Pb collisions with respect to pp collisions is found for K0 s and Λ(Λ̄). A significant high-pt suppression of these hadrons is also observed in the ratio of central-to-peripheral collisions. The nuclear modification of K0 s and Λ(Λ̄) is compatible with the modification of charged hadrons at
high pt. The calculations with the transport model BAMPS agree with these results suggesting a similar energy loss for all light quarks, i.e. u, d and s. Moreover, a compatible suppression for c-quarks appears in the ALICE measurements via the D meson RAA as well as in the BAMPS calculations, which hints to a flavour-independent suppression if light- and c-quarks are regarded. Within this consideration, no indication for a medium-modified fragmentation is found yet.
To summarize, for the particle production in Pb–Pb collisions at the LHC relative to pp neither at lower pt (rapidity density) nor at higher pt (nuclear modification factor) a significant difference of K0 s and Λ(Λ̄) carrying strangeness to hadrons made of u- and d-quarks was found.
The planned Facility for Antiproton and Ion Research (FAIR) at GSI has to cope with a wide range of beam intensities in its high-energy beam transport systems and in the storage rings. To meet the requirements of a non-intercepting intensity measurement down to nA range, it is planned to install a number of Cryogenic Current Comparator (CCC) units at different locations in the FAIR beamlines. In this work, the first CCC system for intensity measurement of heavy ion beams, which was developed at GSI, was re-commissioned and upgraded to be used as a 'GSI - CCC prototype' for extensive optimization and development of an improved CCC for FAIR. After installation of a new SQUID sensor and related electronics, as well as implementation of improved data acquisition components, successful beam current measurements were performed at a SIS18 extraction line. The measured intensity values were compared with those of a Secondary Electron Monitor (SEM). Furthermore, the spill-structure of a slowly extracted beam was measured and analyzed, investigating its improvement due to bunching during the slow-extraction process. Due to the extreme sensitivity of the superconducting sensor, the determined intensity values as well as the adjustment of the system for optimal performance are strongly influenced by the numerous noise sources of the accelerators environment. For this reason, detailed studies of different effects caused by noise have been carried out, which are presented together with proposals to reduce them. Similarly, studies were performed to increase the dynamic range and overcome slew rate limitations, the results of which are illustrated and discussed as well. By combining the various optimizations and characterizations of the GSI CCC prototype with the experiences made during beam operation, criteria for a more efficient CCC System could be worked out, which are presented in this work. The details of this new design are worked out with respect to the corresponding boundary conditions at FAIR. Larger beam tube diameters, higher radiation resistivity and UHV requirements are of particular importance for the cryostat. At the same time these parameters affect the CCC superconducting magnetic shielding, which again has significant influence on the current resolution of the system. In order to investigate the influence of the geometry of the superconducting magnetic shield on different magnetic field components and to optimize the attenuation, FEM simulations have been performed. Based on the results of these calculations, modifications of the shield geometry for optimum damping behavior are proposed and discussed in the thesis.
Im Rahmen des FAIR Projekts sollen in den Ringbeschleunigern SIS18 und SIS100 Ionenstrahlen mit höchster Intensität beschleunigt werden. Um die Raumladungsgrenze zu erhöhen, werden dazu Ionen mit mittleren Ladungszuständen verwendet. Diese haben aber größere Wirkungsquerschnitte für Umladung in Wechselwirkungen mit im Strahlvakuum vorhandenen Restgasteilchen als hochgeladene Ionen. Kommt es zu Strahlverlusten, lösen die verlorenen Ionen am Auftreffort weitere Restgasteilchen von den Wänden des Strahlrohrs und erhöhen so lokal die Restgasdichte. Die Qualität des Vakuums ist deshalb für einen stabilen Strahlbetrieb essentiell.
Im SIS100 kommen kryogene Vakuumkammern zum Einsatz, deren Wände als Kryosorptionspumpen für Wasserstoff und Helium dienen und alle schwereren Restgaskomponenten durch Kryokondensation binden können. Um die Vorhersagegenauigkeit des abteilungsinternen Programms „StrahlSim“ zur Simulation des dynamischen Vakuums zu verbessern, wurden im Rahmen dieser Arbeit das Saugvermögen und die Pumpkapazität für Wasserstoff auf einer Edelstahloberfläche untersucht.
Dazu wurde ein UHV Teststand entwickelt und aufgebaut. Dieser besteht aus einem warmen Diagnoseteil, mit dem der Gasfluss in und aus dem kalten Teil überwacht werden kann. Im kalten Teil befindet sich eine kleine Kammer mit Edelstahlwänden, für die verschiedene Temperaturen zwischen 7 und 31 K eingestellt werden können. Diese Kammer repräsentiert ein kleines Stück kryogenes Strahlrohr. Bei verschiedenen Temperaturen und Oberflächenbelegungen wurden dort jeweils das Saugvermögen und der sich einstellende Gleichgewichtsdruck im Bereich von 4E-11 bis 2E-7 mbar gemessen. Die Gleichgewichtsdrücke bei einer bestimmten Temperatur bei wachsender Oberflächenbelegung werden als Adsorptionsisotherme bezeichnet. Sie ergeben sich aus dem Gleichgewicht von thermisch desorbierenden Teilchen und deren Readsorption. Die kalte Kammer wird umgeben von einem Kryostaten, bestehend aus thermischem Schild und Außentank. Für diesen wurde die thermische Auslegung durchgeführt, die Konstruktion erfolgte extern.
Aus dem gemessenen Saugvermögen konnte die Haftwahrscheinlichkeit berechnet werden. Sie stellte sich als im Rahmen der Messgenauigkeit als unabhängig von Belegung und Temperatur heraus. Ihr Wert liegt nahe 1 mit einer Unsicherheit bis 0,1. Da sämtliche Oberflächen in den kryogenen Bereichen als Pumpen wirken, ist dieser Wert mehr als ausreichend um die für den stabilen Strahlbetrieb nötigen Vakuumbedingungen zu erreichen und stabil zu halten.
Die Isothermen hingegen sind stark von der Temperatur abhängig. Über 18 K liegen die Gleichgewichtsdrücke bereits bei minimalen Oberflächenbelegungen in für den Strahlbetrieb nicht tolerierbaren Bereichen. Mit sinkender Temperatur können die Oberflächen immer mehr Gas aufnehmen. Doch auch bei den tiefsten vermessenen Temperaturen zwischen 7 und 8 K ist ein stabiler Strahlbetrieb nur bei Belegungen von deutlich unter einer halben Monolage, etwa 5E14 Wasserstoffmoleküle pro cm², möglich.
Diese Ergebnisse wurden in StrahlSim implementiert. Zunächst wurde der Code für die Simulation von teilweise kryogenen Beschleunigern angepasst. Die wichtigste Änderung war die Einführung von thermischer Transpiration. Sie bewirkt, dass die Restgasteilchendichte an Kalt-Warm-Übergängen auf der kalten Seite erhöht ist. Mit dieser Änderung und den implementierten Ergebnissen aus den Messungen wurden Simulationen für das SIS100 durchgeführt. Mit den Isothermen konnten die bei verschiedenen Temperaturen und Bedeckungen zu erwartenden Durchschnittsdichten berechnet werden, die wiederum bestimmend für die Strahlverluste sind. Des Weiteren wurde ein mehrwöchiger Dauerbetrieb simuliert. Es zeigt sich zunächst eine Verschlechterung der Vakuumbedingungen auf Grund der langsamen Sättigung der Oberflächen. Diese verlangsamt sich aber immer mehr und stabilisiert sich bevor zu hohe Restgasdichten auftreten. Im schlechtesten Fall sind die kryogenen Oberflächen so weit gesättigt, dass sie genauso viele Gasteilchen thermisch desorbieren wie sie adsorbieren, sie also praktisch passiv sind. Auch dann wäre die Gleichgewichtsdichte im Beschleuniger noch tief genug, um Verluste durch Umladung hinreichend niedrig zu halten.
Als problematisch könnten sich hingegen dynamische Temperaturerhöhungen der Kammerwände erweisen. In diesem Fall stellt sich praktisch verzögerungsfrei der durch die neue Isotherme definierte Gleichgewichtsdruck ein, der auch bei wenigen Kelvin Temperaturunterschied bereits um mehrere Größenordnungen höher liegen kann. Sind Temperaturerhöhungen während des Betriebs zu erwarten, sollten die Oberflächen so frei wie möglich von Wasserstoff gehalten werden. Dazu kann man sich eben diesen Effekt zunutze machen: Durch temporäres Anwärmen der Oberflächen unmittelbar vor dem Strahlbetrieb können die Oberflächen schnell von Wasserstoff befreit werden, der dann von lokalisierten Pumpen aus dem System entfernt werden kann.
The Compressed Baryonic Matter (CBM) experiment will explore the phase diagram of strongly interacting matter in the region of high net baryonic densities. The matter at these extreme conditions will be produced and studied in heavy-ion collisions with a fixed target set-up.
The present work is dedicated to the main component of the CBM experiment - the Silicon Tracking System (STS). The STS comprises of 8 tracking stations with 1292 double sided silicon microstrip sensors. The STS has to enable the reconstruction of up to 1000 charged particle tracks per nucleus-nucleus interaction at the rate of up to 10 MHz, provide a momentum resolution of Δp/p =1%, and withstand the radiation load of up to 1 x 1014 neq/cm2 (neq — radiation dose of 1 MeV neutron equivalent). Self-triggering read-out electronics will be located on the periphery of the detecting planes, and connected to the sensors with low mass micro-cables.
During the R&D phase, as well as in the pre-series and series production phase, the characterization of the sensors, of the front-end electronics and of the complete detector modules has to be performed. It is evident that characterization of more than 1000 silicon microstrip sensors and later of complete detector modules is very time-consuming, and may even damage the objects if not performed carefully. One of the goals of this work was to develop a systematic procedure for the quality assurance for the double-sided silicon microstrip sensors. This includes static optical inspection and visual tests, passive electrical test (such as leakage current, bulk capacitance, inter-strip capacitance & resistances, bias resistance and coupling capacitance), radiation hardness and long-term stability. A strategy for the quality assurance of these sensors is presented, defining the various tests to be performed and the documentation of the results. The techniques and quality assurance criteria will be applied for the pre-series and series production.
With decreasing feature size and increase in functionality and structures, the classical mechanical probe approach for internal fault detection and functional testing faces increasing challenges. In the field of silicon based chips and sensors there is rarely any analysis on the topic of non-invasive or contact-less probing and characterization, despite the fact that the contact-less probing is becoming more and more important as the fabrication technologies become smaller and more susceptible to the parasitic impact of mechanical probes. The silicon micro-strip double sided sensors used in STS have a complex structure, such as 1024 metal electrodes, 2048 bias resistors, 2048 DC pads and 4098 AC pads for probing, several guard rings, and even more in the 6.2 cm x 6.2 cm prototype sensor. Photo-intrusive technique is the best solution for the characterization and investigation of crucial parameters related to the detector operation and its functionality. A photo-intrusive probing is a method in which a non-invasive pulsed laser of a desired wavelength is used to inject the photon into the bulk and resulting in electron-hole pairs (e-h). In a completely depleted silicon sensor the charge injected (or generated) by the pulsed laser beam could be detected as current and shall be used for characterization.
A non-invasive contact-less Laser Test System (LTS) was developed based on a pulsed laser to investigate properties of the silicon sensors. The set-up is able to inject charge locally and scan sensors(or detector modules) with a pulsed infra-red laser driven by a step motor. The LTS is designed to measure sensor response in an automatized procedure at several thousand positions across the sensor with focused infra-
red laser light (spot size = 12 μm , wavelength = 1060 nm). The duration (10 ns) and power (5 mW) of the laser pulses are selected such that the absorption of the laser light in the 300 μm thick silicon sensors produces a number of about 24000 electrons, which is similar to the charge created by the minimum ionizing particles (MIP) in these sensors. The set-up was used to developed characterization procedures to determine the charge sharing between strips, and to measure a qualitative uniformity of the sensor response over the whole active area. The prototype sensors which are tested with the set-up are small prototype sensors (256 strips, pitch = 50 μm on each side) and full-size detector modules (1024 strips/side and pitch = 58 μm). They are read-out using a self-triggering prototype read-out electronic ASIC called n-XYTER. Laser scans for amplitude response, charge sharing in the inter-strip region, and spot-size determination technique are reported. For the verification of the some design parameters, unique methods of determining coupling capacitance, and inter-strip capacitance have been developed. The modules were also tested with proton beams, and the charge sharing in the inter-strip region has been compared to the laser test results.
The PANDA experiment at FAIR will study fundamental questions of strong interaction with high precision. Effcient particle identification for a wide momentum range and the full solid angle is required for successful reconstruction of the benchmark channels of the broad PANDA physics program. For this purpose a compact ring imaging Cherenkov detector is being developed for the barrel region of the PANDA detector. The concept and the baseline design of the PANDA Barrel DIRC were inspired by the BABAR DIRC and improved with important modifications, like fast photon timing, a compact expansion volume, and focusing optics. The required detector resolution was defined based on the PANDA PID specifications using the phase space distributions of the final state kaons produced in selected benchmark channels. To optimize the PANDA Barrel DIRC design in terms of performance and cost the baseline detector geometry and a number of design options were implemented in the simulation. The key options include the radiator dimensions, two types of expansion volume shapes, and a variety of focusing systems. The performance of the detector designs was quantified in terms of single photon Cherenkov angle resolution and photon yield. It was found that the number of radiators can be reduced by about 40% without loss in performance. A compound spherical lens without air gap was found to be a promising focusing system. An optimized Barrel DIRC design meeting the PID requirements includes three radiator bars per at section, the compound lens without air gap, a compact prism-shaped EV, and a total of 192 Microchannel-Plate PMTs as photosensors. The number of electronic channels can be halved without loss in performance by combining two neighbouring pixels. For such a detector design the total cost will be significantly reduced compared to the baseline version while still meeting or exceeding the PANDA PID performance goals.
In this work, the complex structure of ionization and dissociation pathways on the potential energy curves in small molecules were investigated that are initiated by the absorption of a sequence of multi-color pulses in the XUV, VUV, and IR spectrum. Femtosecond pump-probe spectroscopy was used to track the evolution of nuclear dynamics in neutral hydrogen molecules. Previously unpublished excitation and ionization pathways leading to the dissociative ionization of hydrogen molecules were investigated by employing 3D momentum imaging spectroscopy. These studies were extended to oxygen molecules where an XUV attosecond pulse train coherently ionized several electronic states of O2+ followed by the dissociation of the molecule via multiple pathways. The infrared electric field of the driving laser was then used to couple the electronic and nuclear wave-packets, thus, manipulating the dissociation dynamics of the molecule on an attosecond time scale.
In order to perform the experiments presented here, a novel experimental setup was developed and constructed. It combines an existing high-flux High Harmonic Generation light source that delivers attosecond pulse trains in the VUV and XUV spectrum with a state-of-the-art 3D momentum imaging apparatus (COLTRIMS), as well as a beamline consisting of several experimental tools enabling the selection, characterization, and propagation of the photon spectrum.
Within this thesis, the mechanical integration of the Micro Vertex Detector (MVD) of the Compressed Baryonic Matter (CBM) experiment is developed. The CBM experiment, which is being set up at the future FAIR facility, aims to investigate the phase diagram of strongly interacting matter in the regime of high net-baryon densities and moderate temperatures. Heavy-ion collisions at beam energies in the range of 2 to 45 AGeV, complemented by results from elementary reactions, will allow access to these conditions. The experiments conducted at LHC (CERN, Switzerland) and at RHIC (BNL, USA = does not apply within the Beam Energy Scan program) so far focus on the investigation of the phase diagram in the regime of high temperatures and vanishing net-baryon densities. The high beam intensities provided by FAIR will enable CBM to focus its experimental program on systematical studies of rare particles. Among other particle species, open charm-carrying particles are one of the most promising observables to investigate the medium created in heavy-ion collisions since their charm quarks are exposed to the medium and traverse its whole evolution. The fact that the decay particles of these rare observables are also produced abundantly in direct processes in heavy-ion collisions results in a huge combinatorial background which attributes specific requirements to the detector systems. The call for a high interaction rate leads to a cutting-edge detector system which provides an excellent spatial resolution, thin detector stations and the capability to cope with the induced radiation as well as the high rate of traversing particles and the resulting track density. The required demands are to be implemented by the MVD which will be equipped with four planar stations positioned at 50, 100, 150 and 200 mm downstream the target. The geometrical acceptance, which has to be covered with charge-sensitive material, is defined according to the requirements of CBM in the polar angle range of [2.5°; 25°]. The MVD stations have to contribute as little as possible to the overall material budget. The expected beam intensity and the vicinity close to the target require silicon detectors that provide a hardness against non-ionizing radiation of more than 10^13 n_eq/cm² and against ionizing radiation of more than 1 Mrad. In addition, the read-out time of the sensors has to be as short as possible to avoid potential ambiguities in the particle tracking caused by the pile-up of hits having emerged from different collisions. For the time being, Monolithic Active Pixel Sensors (MAPS) offer the optimal choice of technology required to address the physics program of CBM with respect to the spectroscopy of open charm and di-electrons. The geometrical properties of these sensors define the layout of the detector. To limit the multiple scattering of the produced particles inside the geometrical acceptance, the sensors and the MVD have to operate in a moderate vacuum. The sensors are thinned down to a thickness of 50 µm and, to achieve a maximum polar angle coverage, they are glued onto both sides of dedicated thin carriers. These carriers, which are made of highly thermally conductive materials such as CVD diamond or encapsulated TPG, allow efficient extraction of the power produced in the sensors. This enables their operation at temperatures well below 0 °C as suggested by corresponding radiation hardness studies. Dedicated actively cooled aluminum-based heat sinks are positioned outside of the acceptance to dissipate the heat produced by the sensors and the front-end electronics. The design of the MVD, including the realistic thicknesses of the integrated materials, has been developed and refined in the context of this thesis. It has been transformed into a unique software model which is used to simulate and further optimize the mechanical and thermal properties of the MVD, as well as in sophisticated physics simulations. The model allowed evaluation of the material budget of each individual MVD station in its geometrical acceptance. The calculated averaged material budget values stay well below the material budget target values demanded by the physics cases. The thermal management of the MVD has been simulated on the level of a quadrant of each MVD station – four identically constructed quadrants are forming an MVD station – taking into account material properties of the sensors, the glue and the sensor carrier. The temperature gradients across the pixels of a given sensor area in the direction of the rows and columns were found to be in an acceptable range of below 5 K. A temperature difference between the thermal interface area and the maximum sensor temperature of dT = 5 K on the first and a value of dT = 40 K on the fourth MVD station has been thermally simulated assuming a sensor power dissipation of 0.35 W/cm², highlighting the need to optimize the thermal interface between the involved materials as well as the power dissipation of the sensors. The feasibility of several key aspects required for the construction phase of the MVD has been investigated within the MVD Prototype project. The construction of the MVD Prototype allowed evaluation, testing and validation of the handling and the double-sided integration of ultra-thin sensors – the required working steps for their integration have been specified, evaluated and successfully established – as well as their operation in the laboratory and during a concluding in-beam test using high-energetic pions provided by the CERN-SPS. The thermal characterization of the MVD Prototype during its operation – in a temperature range from [5 °C; 25 °C], not in vacuum – confirmed the corresponding thermal simulations conducted during its design phase and substantiated the results of the thermal simulations for the design of the MVD. The aim of a material budget value of only x/X_0 ~ 0.3% for the MVD Prototype has been accomplished. Analyzing the in-beam data, the nominal sensor performance parameters were successfully reproduced, demonstrating that the proposed integration process does not impair the sensors’ performance. Moreover, no evidence of potential impact on the sensors’ performance arising from mechanical weaknesses of the MVD Prototype mechanics has been found within the analyzed data. Based on the MVD Prototype and the simulations of the material budget as well as the thermal management, this thesis evaluated the work packages, procedures and quality assurance parameters needed to set up the starting version of the MVD and addressed open questions as well as critical procedures to be studied prior to the production phase of the detector, emphasizing the evaluation of the cooling concept in vacuum and the integration of sensors in ladder structures on both sides of the quadrants of the MVD stations.