Refine
Keywords
- particulate matter (4)
- cigarette (2)
- environmental tobacco smoke (2)
- pregnancy (2)
- smoking (2)
- Auric nanoparticles (1)
- Automatic Environmental Tobacco Smoke Emitter (1)
- Cigarettes (1)
- Citationrate (1)
- Density equalizing mapping (1)
Institute
- Medizin (17)
- Biochemie und Chemie (2)
- Sportwissenschaften (1)
- Global architecture of gestational diabetes research: density-equalizing mapping studies and gender analysis (2016)
- Objective: Gestational diabetes mellitus (GDM) is associated with substantial morbidity for mothers and their offspring. While clinical and basic research activities on this important disease grow constantly, there is no concise analysis of global architecture of GDM research. Hence, it was the objective of this study to assess the global scientific performance chronologically, geographically and in relation to existing research networks and gender distribution of publishing authors. Study design: On the basis of the New Quality and Quantity Indices in Science (NewQIS) platform, scientometric methods were combined with modern visualizing techniques such as density equalizing mapping, and the Web of Science database was used to assess GDM-related entries from 1900 to 2012. Results: Twelve thousand five hundred four GDM-related publications were identified and analyzed. The USA (4295 publications) and the UK (1354 publications) dominated the field concerning research activity, overall citations and country-specific Hirsch-Index, which quantified the impact of a country’s published research on the scientific community. Semi-qualitative indices such as country-specific citation rates ranked New Zealand and the UK at top positions. Annual collaborative publications increased steeply between the years 1990 and 2012 (71 to 1157 respectively). Subject category analysis pointed to a minor interest of public health issues in GDM research. Gender analysis in terms of publication authorship revealed a clear dominance of the male gender until 2005; then a trend towards gender equity started and the activity of female scientists grew visibly in many countries. The country-specific gender analysis revealed large differences, i.e. female scientists dominated the scientific output in the USA, whereas the majority of research was published by male authors in countries such as Japan. Conclusion: This study provides the first global sketch of GDM research architecture. While North-American and Western-European countries were dominating the GDM-related scientific landscape, a disparity exists in terms of research output between developed and low-resource countries. Since GDM is linked to considerable mortality and morbidity of mothers and their offspring and constitutes a tremendous burden for the healthcare systems in underserved countries, our findings emphasize the need to address disparities by fostering research endeavors, public health programs and collaborative efforts in these nations.
- Snakebite envenoming – a combined density equalizing mapping and scientometric analysis of the publication history (2016)
- Estimates suggest that more than 25,000 to 125,000 people die annually from snakebite envenomation worldwide. In contrast to this major disease burden, thorough bibliometric studies do not exist so far that illustrate the overall research activity over a long time span. Therefore, the NewQIS-platform conducted an analysis on snakebite envenoming using the Thomson Reuters database Web of Science. To determine and assess changes regarding the scientific activities and to specifically address the more recent situation we analyzed two time intervals (t). During the first time interval from 1900 to 2007 (t1) 13,015 publications (p) were identified. In the following period (2008–2016 = t2) 4,982 publications were identified by the same search strategy. They originate from 114 (t1) respectively 121 countries (t2), with the USA (p = 3518), Brazil (p = 1100) and Japan (p = 961) being most productive in the first period, and the USA (p = 1087), Brazil (p = 991) and China (p = 378) in the second period, respectively. Setting the publication numbers in relation to GDP/capita, Brazil leads with 92 publications per 10,000 Int$GDP/capita, followed by India with 79 publications per 10000 Int$GDP/capita (t1). Comparing the country’s publication activity with the Human Development Index level indicates that the majority of the publications is published by highly developed countries. When calculating the average citation rates (citations per published item = CR) mainly European countries show the highest ranks: From 1900–2007 Sweden ranks first with a CR = 27, followed by the Netherlands (CR = 24.8), Switzerland (CR = 23), Spain, Austria and the USA (CR = 22). From 2008 to 2016 the highest rate achieves Switzerland with a value of 24.6, followed by Belgium (CR = 18.1), Spain (CR = 16.7), Costa Rica (CR = 14.9) and Netherlands (CR = 14). Compared with this, the USA was placed at rank 13 (CR = 9,5). In summary, the present study represents the first density-equalizing map projection and in-depth scientometric analysis of the global research output on snakebites and its venoms. So it draws a sketch of the worldwide publication architecture and indicates that countries with a high incidence of snakebites and a low economical level still need to be empowered in carrying out research in this area.
- Pulmonary hypertension : scientometric analysis and density-equalizing mapping (2017)
- Pulmonary hypertension (PH) is characterized by the increase of the mean pulmonary arterial pressure in the lung circulation. Despite the large number of experimental and clinical studies conducted on pulmonary hypertension, there is no comprehensive work that analyzed the global research activity on PH so far. We retrieved the bibliometric data of the publications on pulmonary hypertension for two periods from the Web of science database. Here, we set the first investigation period from 1900 to 2007 (t1) due to the cited half life of articles and the relating difficulties to interpret the citation parameters. The second evaluation period (t2) covers the time interval from 2008 onwards including the year 2015. The data were analyzed and processed to density-equalizing maps using the NewQIS platform. A total number of 18,986 publications were identified in t1 that come from 85 countries. The US published the highest number of publications (n = 7,290), followed by the UK, Germany, Japan and France. In t2 19,676 items could be found worked out by 130 countries. The raking started just the same with the USA as most publishing nation with 7,127 publications on PH, followed by the UK and Germany. Japan fell back on 6th place, whereas China came into view on the 5th position. Analyzing the average citation rate as a parameter for research quality, Mexico reached the highest value in t1 and Ireland in t2. While, the country specific h-index underlined the leading position of the US research in both evaluation periods again. The average number of international collaboration items was expanding from none in 1978 to 530 items in 2015 with the USA as the country with the highest number of collaboration articles. The present study is the first large scale density-equalizing mapping and scientometric analysis of global PH research activity. Our data draw a sketch of the global research architecture in this field, indicating a need for specific research programs in countries with a lower human development index.
- Fit to play : posture and seating position analysis with professional musicians - a study protocol (2017)
- Background: Musical performance-associated musculoskeletal disorders (MSD) are a common health problem among professional musicians. Considering the manifold consequences arising for the musicians, they can be seen as a threat for their professional activity. String players are the most affected group of musicians in this matter. Faults in upper body posture while playing the instrument, causing un-ergonomic static strain on the back and unergonomic limp-movements, are a main reason for musculoskeletal disorders and pain syndromes. Methods: A total of 66 professional musicians, divided into three groups, are measured. The division is performed by average duration of performance, intensity of daily exercise and professional experience. Video raster stereography, a three-dimensional analysis of the body posture, is used to analyse the instrument-specific posture. Furthermore the pressure distribution during seating is analysed. Measurements are performed because the musician is sitting on varying music chairs differing in structure and/or construction of the seating surface. The measurements take place in habitual seating position as well as during playing the instrument. Results: To analyse the influence of different chairs, ANOVA for repeated measurements or Friedman-test is used, depending on normality assumptions. Comparison of posture between amateur musicians, students, and professional orchestral musicians is carried out the non-parametric Jonckheere-Terpstra-test. Conclusions: Our method attempts to give the musicians indications for the right music chair choice by analyzing the chair concepts, so that thereby preemptively MSD can be reduced or prevented.
- Particulate matter in second-hand smoke emitted from different cigarette sizes and types of the brand vogue mainly smoked by women (2016)
- Abstract Indoor air pollution with harmful particulate matter (PM) is mainly caused by cigarette smoke. Super-Slim-Size-Cigarettes (SSL) are considered a less harmful alternative to King-Size-Cigarettes (KSC) due to longer filters and relatively low contents. We ask if “Combined Mainstream and Sidestream Smoke” (CMSS)-associated PM levels of SSL are lower than of KSC and thus are potentially less harmful. PM concentrations in CMSS (PM10, PM2.5, and PM1) are measured from four cigarette types of the brand Vogue, using an “automatic-environmental-tobacco-smoke-emitter” (AETSE) and laser aerosol spectrometry: SSL-BLEUE, -MENTHE, -LILAS and KSC-La Cigarette and -3R4F reference. This analysis shows that SSL MENTHE emitted the highest amount of PM, and KSC-La Cigarette the lowest. 3R4F reference emitted PM in the middle range, exceeding SSL BLEUE and falling slightly below SSL LILAS. It emerged that PM1 constituted the biggest proportion of PM emission. The outcome shows significant type-specific differences for emitted PM concentrations. Our results indicate that SSL are potentially more harmful for passive smokers than the respective KSC. However, this study cannot give precise statements about the general influence of the size of a cigarette on PM. Alarming is that PM1 is responsible for the biggest proportion of PM pollution, since smaller particles cause more harmful effects.
- Brand Cigarillos : low price but high particulate matter levels-is their favorable taxation in the European Union justified? (2015)
- Background: Second hand smoke (ETS)-associated particulate matter (PM) contributes considerably to indoor air contamination and constitutes a health risk for passive smokers. Easy to measure, PM is a useful parameter to estimate the dosage of ETS that passive smokers are exposed to. Apart from its suitability as a surrogate parameter for ETS-exposure, PM itself affects human morbidity and mortality in a dose-dependent manner. We think that ETS-associated PM should be considered an independent hazard factor, separately from the many other known harmful compounds of ETS. We believe that brand-specific and tobacco-product-specific differences in the release of PM matter and that these differences are of public interest. Methods: To generate ETS of cigarettes and cigarillos as standardized and reproducible as possible, an automatic second hand smoke emitter (AETSE) was developed and placed in a glass chamber. L&M cigarettes ("without additives", "red label", "blue label"), L&M filtered cigarillos ("red") and 3R4F standard research cigarettes (as reference) were smoked automatically according to a self-developed, standardized protocol until the tobacco product was smoked down to 8 mm distance from the tipping paper of the filter. Results: Mean concentration (Cmean) and area under the curve (AUC) in a plot of PM2.5 against time were measured, and compared. CmeanPM2.5 were found to be 518 μg/m3 for 3R4F cigarettes, 576 μg/m3 for L&M "without additives" ("red"), 448 μg/m3 for L&M "blue label", 547 μg/m3 for L&M "red label", and 755 μg/m3 for L&M filtered cigarillos ("red"). AUCPM2.5-values were 208,214 μg/m3·s for 3R4F reference cigarettes, 204,629 μg/m3·s for L&M "without additives" ("red"), 152,718 μg/m3·s for L&M "blue label", 238,098 μg/m3·s for L&M "red label" and 796,909 μg/m3·s for L&M filtered cigarillos ("red"). Conclusion: Considering the large and significant differences in particulate matter emissions between cigarettes and cigarillos, we think that a favorable taxation of cigarillos is not justifiable.
- Are filter-tipped cigarettes still less harmful than non-filter cigarettes?—a laser spectrometric particulate matter analysis from the non-smokers point of view (2016)
- Background: Environmental tobacco smoke (ETS) is associated with human morbidity and mortality, particularly chronic obstructive pulmonary disease (COPD and lung cancer. Although direct DNA-damage is a leading pathomechanism in active smokers, passive smoking is enough to induce bronchial asthma, especially in children. Particulate matter (PM) demonstrably plays an important role in this ETS-associated human morbidity, constituting a surrogate parameter for ETS exposure. Methods: Using an Automatic Environmental Tobacco Smoke Emitter (AETSE) and an in-house developed, non-standard smoking regime, we tried to imitate the smoking process of human smokers to demonstrate the significance of passive smoking. Mean concentration (Cmean) and area under the curve (AUC) of particulate matter (PM2.5) emitted by 3R4F reference cigarettes and the popular filter-tipped and non-filter brand cigarettes “Roth-Händle” were measured and compared. The cigarettes were not conditioned prior to smoking. The measurements were tested for Gaussian distribution and significant differences. Results: Cmean PM2.5 of the 3R4F reference cigarette: 3911 µg/m3; of the filter-tipped Roth-Händle: 3831 µg/m3; and of the non-filter Roth-Händle: 2053 µg/m3. AUC PM2.5 of the 3R4F reference cigarette: 1,647,006 µg/m3·s; of the filter-tipped Roth-Händle: 1,608,000 µg/m3·s; and of the non-filter Roth-Händle: 858,891 µg/m3·s. Conclusion: The filter-tipped cigarettes (the 3R4F reference cigarette and filter-tipped Roth-Händle) emitted significantly more PM2.5 than the non-filter Roth-Händle. Considering the harmful potential of PM, our findings note that the filter-tipped cigarettes are not a less harmful alternative for passive smokers. Tobacco taxation should be reconsidered and non-smoking legislation enforced.
- Particulate matter emissions of four types of one cigarette brand with and without additives : a laser spectrometric particulate matter analysis of secondhand smoke (2019)
- Objective: Inhaled particulate matter (PM) in secondhand smoke (SHS) is deleterious for smokers and non-smokers. Different additives in cigarettes might effect the amount of PM. This study aimed to assess the influence of additives on the PM emissions from different cigarette types in SHS. Design: An experimental study of PM measuring in SHS of cigarettes without exposition of any person. Method: The concentrations of PM (PM10, PM2.5 and PM1) in SHS of four different types of cigarettes of the brand Lucky Strike, two types with additives (Original Red, Original Blue) and two types without additives (Straight Red, Straight Blue), in comparison to the reference cigarette 3R4F were analysed. An automatic environmental tobacco smoke emitter generated SHS in an enclosed space with a volume of 2.88 m3. PM was measured with a laser aerosol spectrometer (Grimm model 1.109). Afterwards, the measuring values of the four Lucky Strike brands and the reference cigarette were statistically evaluated and visualised. Results: Lucky Strike Straight Blue, a cigarette type without additives and lower tar amount, showed 10% to 25% lower PM mean values compared with the other tested Lucky Strike products, but 21% (PM1) respectively 27% (PM2.5,PM10) higher mean values than the reference cigarette. The PM mean of all measured smoke-free baseline values (clean air) was 1.6 µg/m³. It increased up to about 1800 µg/m³ for the reference cigarette and up to about 3070 µg/m³ for the Lucky Strike Original Blue. Conclusions: The findings of this study show the massive increase of PM amount by smoking cigarettes in enclosed spaces and suggest that additives in tobacco products increase the PM amount in SHS. For validation, further comparative studies are necessary focusing on the comparison of the PM concentration of cigarettes with and without additives. Implications: Due to the exposure to SHS, 890 000 people die each year worldwide. PM in SHS endangers the health of both non-smokers and smokers. This study considers the effect of additives like aromatics and humectant agents in cigarettes on PM in SHS. Do additives in tobacco products increase the amount of PM?
- Mobile Air Quality Studies (MAQS) - an international project (2010)
- Due to an increasing awareness of the potential hazardousness of air pollutants, new laws, rules and guidelines have recently been implemented globally. In this respect, numerous studies have addressed traffic-related exposure to particulate matter using stationary technology so far. By contrast, only few studies used the advanced technology of mobile exposure analysis. The Mobile Air Quality Study (MAQS) addresses the issue of air pollutant exposure by combining advanced high-granularity spatial-temporal analysis with vehicle-mounted, person-mounted and roadside sensors. The MAQS-platform will be used by international collaborators in order 1) to assess air pollutant exposure in relation to road structure, 2) to assess air pollutant exposure in relation to traffic density, 3) to assess air pollutant exposure in relation to weather conditions, 4) to compare exposure within vehicles between front and back seat (children) positions, and 5) to evaluate "traffic zone"- exposure in relation to non-"traffic zone"-exposure. Primarily, the MAQS-platform will focus on particulate matter. With the establishment of advanced mobile analysis tools, it is planed to extend the analysis to other pollutants including including NO2, SO2, nanoparticles, and ozone.
- Development and evaluation of a computer-based medical work assessment programme (2008)
- Background: There are several ways to conduct a job task analysis in medical work environments including pencil-paper observations, interviews and questionnaires. However these methods implicate bias problems such as high inter-individual deviations and risks of misjudgement. Computer-based observation helps to reduce these problems. The aim of this paper is to give an overview of the development process of a computer-based job task analysis instrument for real-time observations to quantify the job tasks performed by physicians working in different medical settings. In addition reliability and validity data of this instrument will be demonstrated. Methods: This instrument was developed in consequential steps. First, lists comprising tasks performed by physicians in different care settings were classified. Afterwards content validity of task lists was proved. After establishing the final task categories, computer software was programmed and implemented in a mobile personal computer. At least inter-observer reliability was evaluated. Two trained observers recorded simultaneously tasks of the same physician. Results: Content validity of the task lists was confirmed by observations and experienced specialists of each medical area. Development process of the job task analysis instrument was completed successfully. Simultaneous records showed adequate interrater reliability. Conclusion: Initial results of this analysis supported the validity and reliability of this developed method for assessing physicians' working routines as well as organizational context factors. Based on results using this method, possible improvements for health professionals' work organisation can be identified.
