Refine
Year of publication
Document Type
- Article (25)
- Conference Proceeding (2)
- Doctoral Thesis (1)
Keywords
- BMC (2)
- Bone defect (2)
- Cell therapy (2)
- induced membrane (2)
- 3D printed cell-free scaffold (1)
- Angiogenesis (1)
- Bone marrow mononuclear cells (1)
- Bone regeneration (1)
- Cytokines (1)
- Developmental biology (1)
Institute
- 11,12 and 14,15 epoxyeicosatrienoic acid rescue deteriorated wound healing in ischemia (2019)
- Introduction: Epoxyeicosatrienoic acids (EETs) are able to enhance angiogenesis and regulate inflammation that is especially important in wound healing under ischemic conditions. Thus, we evaluated the effect of local EET application on ischemic wounds in mice. Methods: Ischemia was induced by cautherization of two of the three supplying vessels to the mouse ear. Wounding was performed on the ear three days later. Wounds were treated either with 11,12 or 14,15 EET and compared to untreated control and normal wounds. Epithelialization was measured every second day. VEGF, TNF-α, TGF-β, matrix metalloproteinases (MMP), tissue inhibitors of metalloproteinases (TIMP), Ki67, and SDF-1α were evaluated immunohistochemically in wounds on day 3, 6, and 9. Results: Ischemia delayed wound closure (12.8 days ± 1.9 standard deviation (SD) for ischemia and 8.0 days ± 0.94 SD for control). 11,12 and14,15 EET application ameliorated deteriorated wound healing on ischemic ears (7.6 ± 1.3 SD for 11,12 EET and 9.2 ± 1.4 SD for 14,15 EET). Ischemia did not change VEGF, TNF-α, TGF-β, SDF-1α, TIMP, MMP7 or MMP9 level significantly compared to control. Local application of 11,12 as well as 14,15 EET induced a significant elevation of VEGF, TGF-β, and SDF-1α expression as well as proliferation during the whole phase of wound healing compared to control and ischemia alone. Conclusion: In summary, EET improve impaired wound healing caused by ischemia as they enhance neovascularization and alter inflammatory response in wounds. Thus elevating lipid mediator level as 11,12 and 14,15 EET in wounds might be a successful strategy for amelioration of deranged wound healing under ischemia.
- 3d-printing of hierarchically designed and osteoconductive bone tissue engineering scaffolds (2020)
- In Bone Tissue Engineering (BTE), autologous bone-regenerative cells are combined with a scaffold for large bone defect treatment (LBDT). Microporous, polylactic acid (PLA) scaffolds showed good healing results in small animals. However, transfer to large animal models is not easily achieved simply by upscaling the design. Increasing diffusion distances have a negative impact on cell survival and nutrition supply, leading to cell death and ultimately implant failure. Here, a novel scaffold architecture was designed to meet all requirements for an advanced bone substitute. Biofunctional, porous subunits in a load-bearing, compression-resistant frame structure characterize this approach. An open, macro- and microporous internal architecture (100 µm–2 mm pores) optimizes conditions for oxygen and nutrient supply to the implant’s inner areas by diffusion. A prototype was 3D-printed applying Fused Filament Fabrication using PLA. After incubation with Saos-2 (Sarcoma osteogenic) cells for 14 days, cell morphology, cell distribution, cell survival (fluorescence microscopy and LDH-based cytotoxicity assay), metabolic activity (MTT test), and osteogenic gene expression were determined. The adherent cells showed colonization properties, proliferation potential, and osteogenic differentiation. The innovative design, with its porous structure, is a promising matrix for cell settlement and proliferation. The modular design allows easy upscaling and offers a solution for LBDT.
- Acute ethanol gavage attenuates hemorrhage/resuscitation-induced hepatic oxidative stress in rats (2012)
- Acute ethanol intoxication increases the production of reactive oxygen species (ROS). Hemorrhagic shock with subsequent resuscitation (H/R) also induces ROS resulting in cellular and hepatic damage in vivo. We examined the role of acute ethanol intoxication upon oxidative stress and subsequent hepatic cell death after H/R. 14 h before H/R, rats were gavaged with single dose of ethanol or saline (5 g/kg, EtOH and ctrl; H/R_EtOH or H/R_ctrl, resp.). Then, rats were hemorrhaged to a mean arterial blood pressure of 30 ± 2 mmHg for 60 min and resuscitated. Two control groups underwent surgical procedures without H/R (sham_ctrl and sham_EtOH, resp.). Liver tissues were harvested at 2, 24, and 72 h after resuscitation. EtOH-gavage induced histological picture of acute fatty liver. Hepatic oxidative (4-hydroxynonenal, 4-HNE) and nitrosative (3-nitrotyrosine, 3-NT) stress were significantly reduced in EtOH-gavaged rats compared to controls after H/R. Proapoptotic caspase-8 and Bax expressions were markedly diminished in EtOH-gavaged animals compared with controls 2 h after resuscitation. EtOH-gavage increased antiapoptotic Bcl-2 gene expression compared with controls 2 h after resuscitation. iNOS protein expression increased following H/R but was attenuated in EtOH-gavaged animals after H/R. Taken together, the data suggest that acute EtOH-gavage may attenuate H/R-induced oxidative stress thereby reducing cellular injury in rat liver.
- Autologous cell-based therapy for treatment of large bone defects : from bench to bedside (2018)
- Objectives: Reconstruction of long segmental bone defects is demanding for patients and surgeons, and associated with long-term treatment periods and substantial complication rates in addition to high costs. While defects up to 4–5 cm length might be filled up with autologous bone graft, heterologous bone from cadavers, or artificial bone graft substitutes, current options to reconstruct bone defects greater than 5 cm consist of either vascularized free bone transfers, the Masquelet technique or the Ilizarov distraction osteogenesis. Alternatively, autologous cell transplantation is an encouraging treatment option for large bone defects as it eliminates problems such as limited autologous bone availability, allogenic bone immunogenicity, and donor-site morbidity, and might be used for stabilizing loose alloplastic implants. Methods: The authors show different cell therapies without expansion in culture, with ex vivo expansion and cell therapy in local bone defects, bone healing and osteonecrosis. Different kinds of cells and scaffolds investigated in our group as well as in vivo transfer studies and BMC used in clinical phase I and IIa clinical trials of our group are shown. Results: Our research history demonstrated the great potential of various stem cell species to support bone defect healing. It was clearly shown that the combination of different cell types is superior to approaches using single cell types. We further demonstrate that it is feasible to translate preclinically developed protocols from in vitro to in vivo experiments and follow positive convincing results into a clinical setting to use autologous stem cells to support bone healing.
- Beschleunigte Knochenheilung durch frühe Vaskularisierung mittels Implantation von EPC und MSC auf beta-TCP im Knochendefektmodell der Ratte (2009)
- Fragestellung: In einem ausgedehnten Knochendefekt kann das Einwachsen von knochenbildenden Zellen limitiert sein, da ohne Gefässe die Ernährung der regenerativen Zellen im Knochenkonstrukt insuffizient ist. Endotheliale Progenitorzellen (EPC) sind wichtig bei der Neovaskularisierung. Die frühe Vaskularisierung von grossen Knochendefekten kann für das Überleben und die Funktion von mesenchymalen Stammzellen (MSC) und knochenbildenden Zellen entscheidend sein. Kann die Implantation von EPC und MSC auf osteokonduktiven beta-Tricalciumphosphat (beta-TCP) in einem "critical-size" Knochendefekt des Femur von athymischen Ratten die frühe Vaskularisierung und die Knochenheilung in vivo verbessern? Methodik: Humane EPC wurden aus Buffy-Coat und humane MSC aus Knochenmarkaspirat durch Dichtezentrifugation isoliert. 2.5 x 105 kultivierte und differenzierte EPC und MSC wurden in vitro auf beta-TCP geladen. In 145 athymischen, männlichen Ratten wurde das Femur osteotomiert, ein 5 mm Knochendefekt erzeugt und mit Fixateur externe stabilisiert. Die Knochendefekte wurden mit beta-TCP (Gruppe 1), beta-TCP und MSC (Gruppe 2), beta-TCP und EPC (Gruppe 3), beta-TCP und EPC und MSC (Gruppe 4) oder autologem Knochen (Gruppe 5) gefüllt. Nach 1 Woche (n=40), 4 Wochen (n=40), 8 Wochen (n=40) und 12 Wochen (n=25) wurden die Ratten getötet. Bei Pinlockerung wurde die Ratte ausgeschlossen. Die (immun)histologische Analyse (Färbung mit HE, VEGF-R2, vWF) der Vaskularisierung und Knochenneubildung erfolgte mit Image-Analysis-System. Nach 8 und 12 Wochen erfolgte ein µCT und ein 4-Punkte-Biegungstest. Für die statistische Analyse wurde der Kruskal-Wallis-Test verwendet. Ergebnisse und Schlussfolgerungen: Nach 1 Woche zeigte sich bei der Implantation von EPC/MSC und EPC allein signifikant mehr primitive vaskuläre Plexus (p=0.01;p=0.048) als in Vergleichsgruppen. Im Vergleich zur TCP Gruppe war in allen anderen Versuchsgruppen signifikant mehr Knochenneubildung zu sehen (p<0.01). Ausserdem war in der EPC/MSC-Gruppe signifikant mehr Knochenbildung zu erkennen als in der MSC-Gruppe (p=0.03). Nach 12 Wochen zeigten alle Gruppen eine knöcherne Durchbauung des Defektes, jedoch zeigten bereits 8 Wochen nach Implantation von MSC/EPC 83% der Defekte eine stabile, knöcherne Durchbauung. Bei der Implantation von MSC kam es in 18% der Knochendefekte zum knöchernen Durchbau. Alle anderen experimentellen Gruppen zeigten nach 8 Wochen keine knöcherne Durchbauung. Diese Resultate konnten im µCT, biomechanischen Test und in der Histologie quantifiziert werden. EPC scheinen die frühe Vaskularisierung innerhalb eines Knochenkonstrukt in vivo zu stimulieren und das Einwachsverhalten von MSC zu verbessern, was zu einer beschleunigten Knochenheilung im Knochendefektmodell der Ratte führt.
- Biofabrication of SDF-1 functionalized 3D-printed cell-free scaffolds for bone tissue regeneration (2020)
- Large segmental bone defects occurring after trauma, bone tumors, infections or revision surgeries are a challenge for surgeons. The aim of our study was to develop a new biomaterial utilizing simple and cheap 3D-printing techniques. A porous polylactide (PLA) cylinder was printed and functionalized with stromal-derived factor 1 (SDF-1) or bone morphogenetic protein 7 (BMP-7) immobilized in collagen type I. Biomechanical testing proved biomechanical stability and the scaffolds were implanted into a 6 mm critical size defect in rat femur. Bone growth was observed via x-ray and after 8 weeks, bone regeneration was analyzed with µCT and histological staining methods. Development of non-unions was detected in the control group with no implant. Implantation of PLA cylinder alone resulted in a slight but not significant osteoconductive effect, which was more pronounced in the group where the PLA cylinder was loaded with collagen type I. Addition of SDF-1 resulted in an osteoinductive effect, with stronger new bone formation. BMP-7 treatment showed the most distinct effect on bone regeneration. However, histological analyses revealed that newly formed bone in the BMP-7 group displayed a holey structure. Our results confirm the osteoinductive character of this 3D-biofabricated cell-free new biomaterial and raise new options for its application in bone tissue regeneration.
- Characterization of bone marrow mononuclear cells on biomaterials for bone tissue engineering in vitro (2015)
- Bone marrow mononuclear cells (BMCs) are suitable for bone tissue engineering. Comparative data regarding the needs of BMC for the adhesion on biomaterials and biocompatibility to various biomaterials are lacking to a large extent. Therefore, we evaluated whether a surface coating would enhance BMC adhesion and analyze the biocompatibility of three different kinds of biomaterials. BMCs were purified from human bone marrow aspirate samples. Beta tricalcium phosphate (β-TCP, without coating or coated with fibronectin or human plasma), demineralized bone matrix (DBM), and bovine cancellous bone (BS) were assessed. Seeding efficacy on β-TCP was 95% regardless of the surface coating. BMC demonstrated a significantly increased initial adhesion on DBM and β-TCP compared to BS. On day 14, metabolic activity was significantly increased in BMC seeded on DBM in comparison to BMC seeded on BS. Likewise increased VEGF-synthesis was observed on day 2 in BMC seeded on DBM when compared to BMC seeded on BS. The seeding efficacy of BMC on uncoated biomaterials is generally high although there are differences between these biomaterials. Beta-TCP and DBM were similar and both superior to BS, suggesting either as suitable materials for spatial restriction of BMC used for regenerative medicine purposes in vivo.
- Chronic ethanol feeding modulates inflammatory mediators, activation of nuclear factor-κB, and responsiveness to endotoxin in murine Kupffer cells and circulating leukocytes (2014)
- Chronic ethanol abuse is known to increase susceptibility to infections after injury, in part, by modification of macrophage function. Several intracellular signalling mechanisms are involved in the initiation of inflammatory responses, including the nuclear factor-κB (NF-κB) pathway. In this study, we investigated the systemic and hepatic effect of chronic ethanol feeding on in vivo activation of NF-κB in NF-κB(EGFP) reporter gene mice. Specifically, the study focused on Kupffer cell proinflammatory cytokines IL-6 and TNF-α and activation of NF-κB after chronic ethanol feeding followed by in vitro stimulation with lipopolysaccharide (LPS). We found that chronic ethanol upregulated NF-κB activation and increased hepatic and systemic proinflammatory cytokine levels. Similarly, LPS-stimulated IL-1 β release from whole blood was significantly enhanced in ethanol-fed mice. However, LPS significantly increased IL-6 and TNF-α levels. These results demonstrate that chronic ethanol feeding can improve the responsiveness of macrophage LPS-stimulated IL-6 and TNF-α production and indicate that this effect may result from ethanol-induced alterations in intracellular signalling through NF-κB. Furthermore, LPS and TNF-α stimulated the gene expression of different inflammatory mediators, in part, in a NF-κB-dependent manner.
- Circulating leukotriene b4 identifies respiratory complications after trauma (2012)
- Background. Leukotriene B4 (LTB4), a proinflammatory lipid mediator correlates well with the acute phase of Acute Respiratory Distress Syndrome (ARDS). Therefore, LTB4-levels were investigated to determine whether they might be a useful clinical marker in predicting pulmonary complications (PC) in multiply traumatized patients. Methods: Plasma levels of LTB4 were determined in 100 patients on admission (ED) and for five consecutive days (daily). Twenty healthy volunteers served as control. LTB4-levels were measured by ELISA. Thirty patients developed PC (pneumonia, respiratory failure, acute lung injury (ALI), ARDS, pulmonary embolism) and 70 had no PC (ØPC). Results. LTB4-levels in the PC-group [127.8 pg/mL, IQR: 104–200pg/ml] were significantly higher compared to the ØPC-group on admission [95.6 pg/mL, IQR: 55–143 pg/mL] or control-group [58.4 pg/mL, IQR: 36–108 pg/mL]. LTB4 continuously declined to basal levels from day 1 to 5 without differences between the groups. The cutoff to predict PC was calculated at 109.6 pg/mL (72% specificity, 67% sensitivity). LTB4 was not influenced by overall or chest injury severity, age, gender or massive transfusion. Patients with PC received mechanical ventilation for a significantly longer period of time, and had prolonged intensive care unit and overall hospital stay. Conclusion. High LTB4-levels indicate risk for PC development in multiply traumatized patients
- Corrigendum to "Characterization of bone marrow mononuclear cells on biomaterials for bone tissue engineering in vitro" (2015)
- In the paper titled "Characterization of Bone Marrow Mononuclear Cells on Biomaterials for Bone Tissue Engineering In Vitro," there was an error in the Acknowledgments. ...
