Absolute beam position monitoring using HOM-damper signals
- To preserve the required beam quality in an e+/e- collider it is necessary to have a very precise beam position control at each accelerating cavity. An elegant method to avoid additional length and beam disturbance is the usage of signals from existing HOM-dampers. The magnitude of the displacement is derived from the amplitude of a dipole mode whereas the sign follows from the phase comparison of a dipole and a monopole HOM. To check the performance of the system, a measurement setup has been built with an antenna which can be moved with micrometer resolution to simulate the beam. Furthermore we have developed a signal processing to determine the absolute beam displacement. Measurements on the HOM-damper cell can be done in the frequency domain using a network analyser. Final measurements with the nonlinear time dependent signal processing circuit has to be done with very short electric pulses simulating electron bunches. Thus, we have designed a sub nanosecond pulse generator using a clipping line and the step recovery effect of a diode. The measurement can be done with a resolution of about 10 micrometers. Measurements and numerical calculations concerning the monitor design and the pulse generator are presented.
Author: | Claudius PeschkeGND, Gerald Schreiber, Peter HülsmannGND, Horst Klein |
---|---|
URN: | urn:nbn:de:hebis:30-16465 |
Document Type: | Report |
Language: | English |
Date of Publication (online): | 2005/09/27 |
Year of first Publication: | 1998 |
Publishing Institution: | Universitätsbibliothek Johann Christian Senckenberg |
Release Date: | 2005/09/27 |
Page Number: | 3 |
Source: | Proceedings of the XIXth International Linac Conference, Chicago (USA), 23.08. - 28.08.1998, http://sunkist.physik.uni-frankfurt.de/mikro/publications.html |
HeBIS-PPN: | 358604168 |
Institutes: | Physik / Physik |
Dewey Decimal Classification: | 5 Naturwissenschaften und Mathematik / 53 Physik / 530 Physik |
Licence (German): | ![]() |