Open Access

A new era in experimental nuclear physics has begun with the start-up of the Large Hadron Collider at CERN and its dedicated heavy-ion detector system ALICE. Measuring the highest energy density ever produced in nucleus-nucleus collisions, the detector has been designed to study the properties of the created hot and dense medium, assumed to be a Quark-Gluon Plasma. Comprised of 18 high granularity sub-detectors, ALICE delivers data from a few million electronic channels of proton-proton and heavy-ion collisions. The produced data volume can reach up to 26 GByte/s for central Pb–Pb collisions at design luminosity of L = 1027 cm−2 s−1 , challenging not only the data storage, but also the physics analysis. A High-Level Trigger (HLT) has been built and commissioned to reduce that amount of data to a storable value prior to archiving with the means of data filtering and compression without the loss of physics information. Implemented as a large high performance compute cluster, the HLT is able to perform a full reconstruction of all events at the time of data-taking, which allows to trigger, based on the information of a complete event. Rare physics probes, with high transverse momentum, can be identified and selected to enhance the overall physics reach of the experiment. The commissioning of the HLT is at the center of this thesis. Being deeply embedded in the ALICE data path and, therefore, interfacing all other ALICE subsystems, this commissioning imposed not only a major challenge, but also a massive coordination effort, which was completed with the first proton-proton collisions reconstructed by the HLT. Furthermore, this thesis is completed with the study and implementation of on-line high transverse momentum triggers.

The main task of modern large experiments with heavy ions, such as CBM (FAIR), STAR (BNL) and ALICE (CERN) is a detailed study of the phase diagram of quantum chromodynamics (QCD) in the quark-gluon plasma (QGP), the equation of state of matter at extremely high baryonic densities, and the transition from the hadronic phase of matter to the quark-gluon phase. In the thesis, the missing mass method is developed for the reconstruction of short-lived particles with neutral particles in their decay products, as well as its implementation in the form of fast algorithms and a set of software for prac- tical application in heavy ion physics experiments. Mathematical procedures implementing the method were developed and implemented within the KF Par- ticle Finder package for the future CBM (FAIR) experiment and subsequently adapted and applied for processing and analysis of real data in the STAR (BNL) experiment. The KF Particle Finder package is designed to reconstruct most signal particles from the physics program of the CBM experiment, including strange particles, strange resonances, hypernuclei, light vector mesons, charm particles and char- monium. The package includes searches for over a hundred decays of short-lived particles. This makes the KF Particle Finder a universal platform for short-lived particle reconstruction and physics analysis both online and offline. The missing mass method has been proposed to reconstruct decays of short-lived charged particles when one of the daughter particles is neutral and is not regis- tered in the detector system. The implementation of the missing mass method was integrated into the KF Particle Finder package to search for 18 decays with a neutral daughter particle. Like all other algorithms of the KF Particle Finder package, the missing mass method is implemented with extensive use of vector (SIMD) instructions and is optimized for parallel operation on modern many-core high performance com- puter clusters, which can include both processors and coprocessors. A set of algorithms implementing the method was tested on computers with tens of cores and showed high speed and practically linear scalability with respect to the num- ber of cores involved. It is extremely important, especially for the initial stage of the CBM experiment, which is planned for 2025, to demonstrate already now on real data the reliability of the developed approach, as well as the high efficiency of the current implemen- tation of both the entire KF Particle Finder package, and its integral part, the missing mass method. Such an opportunity was provided by the FAIR Phase-0 program, motivating the use in the STAR experiment of software packages orig- inally developed for the CBM experiment. Application of the method to real data of the STAR experiment shows very good results with a high signal-to-background ratio and a large significance value. The results demonstrate the reliability and high efficiency of the missing mass method in the reconstruction of both charged mother particles and their neutral daughter particles. Being an integral part of the KF Particle Finder package, now the main approach for reconstruction and analysis of short-lived particles in the STAR experiment, the missing mass method will continue to be used for the physics analysis in online and offline modes. The high quality of the results of the express data analysis has led to their status as preliminary physics results with the right to present them at international physics conferences and meetings on behalf of the STAR Collaboration.

Das Projekt anan ist ein Werkzeug zur Fehlersuche in verteilten Hochleistungsrechnern. Die Neuheit des Beitrags besteht darin, dass die bekannten Methoden, die bereits erfolgreich zum Debuggen von Soft- und Hardware eingesetzt werden, auf Hochleistungs-Rechnen übertragen worden sind. Im Rahmen der vorliegenden Arbeit wurde ein Werkzeug namens anan implementiert, das bei der Fehlersuche hilft. Außerdem kann es als dynamischeres Monitoring eingesetzt werden. Beide Einsatzzwecke sind getestet worden. Das Werkzeug besteht aus zwei Teilen: 1. aus einem Teil namens anan, der interaktiv vom Nutzer bedient wird 2. und aus einem Teil namens anand, der automatisiert die verlangten Messwerte erhebt und nötigenfalls Befehle ausführt. Der Teil anan führt Sensoren aus — kleine mustergesteuerte Algorithmen —, deren Ergebnisse per anan zusammengeführt werden. In erster Näherung lässt anan sich als Monitoring beschreiben, welches (1) schnell umkonfiguriert werden (2) komplexere Werte messen kann, die über Korrelationen einfacher Zeitreihen hinausgehen.

With processor clock speeds having stagnated, parallel computing architectures have achieved a breakthrough in recent years. Emerging many-core processors like graphics cards run hundreds of threads in parallel and vector instructions are experiencing a revival. Parallel processors with many independent but simple arithmetical logical units fail executing serial tasks efficiently. However, their sheer parallel processing power makes them predestined for parallel applications while the simple construction of their cores makes them unbeatably power efficient. Unfortunately, old programs cannot profit by simple recompilation. Adaptation often requires rethinking and modifying algorithms to make use of parallel execution. Many applications have some serial subroutines which are very hard to parallelize, hence contemporary compute clusters are often homogeneous, offering fast processors for serial tasks and parallel processors for parallel tasks. In order not to waste the available compute power, highly efficient programs are mandatory. This thesis is about the development of fast algorithms and their implementations on modern CPUs and GPUs, about the maximum achievable efficiency with respect to peak performance and to power consumption respectively, and about feasibility and limits of programs for CPUs, GPUs, and heterogeneous systems. Three totally different applications from distinct fields, which were developed in the extent of this thesis, are presented. The ALICE experiment at the LHC particle collider at CERN studies heavy-ion collisions at high rates of several hundred Hz, while every collision produces thousands of particles, whose trajectories must be reconstructed. For this purpose, ALICE track reconstruction and ALICE track merging have been adapted for GPUs and deployed on 64 GPU-enabled compute-nodes at CERN. After a testing phase, the tracker ran in nonstop operation during 2012 providing full real-time track reconstruction. The tracker employs a multithreaded pipeline as well as asynchronous data transfer to ensure continuous GPU utilization and outperforms the fastest available CPUs by about a factor three. The Linpack benchmark is the standard tool for ranking compute clusters. It solves a dense system of linear equations using primarily matrix multiplication facilitated by a routine called DGEMM. A heterogeneous GPU-enabled version of DGEMM and Linpack has been developed, which can utilize the CAL, CUDA, and OpenCL APIs as backend. Employing this implementation, the LOEWE-CSC cluster ranked place 22 in the November 2010 Top500 list of the fastest supercomputers, and the Sanam cluster achieved the second place in the November 2012 Green500 list of the most power efficient supercomputers. An elaborate lookahead algorithm, a pipeline, and asynchronous data transfer hide the serial CPU-bound tasks of Linpack behind DGEMM execution on the GPU reaching the highest efficiency on GPU-accelerated clusters. Failure erasure codes enable failure tolerant storage of data and real-time failover, ensuring that in case of a hardware defect servers and even complete data centers remain operational. It is an absolute necessity for present-day computer infrastructure. The mathematical theory behind the codes involves matrix-computations in finite fields, which are not natively supported by modern processors and hence computationally very expensive. This thesis presents a novel scheme for fast encoding matrix generation and demonstrates a fast implementation for the encoding itself, which uses exclusively either integer or logical vector instructions. Depending on the scenario, it is always hitting different hard limits of the hardware: either the maximum attainable memory bandwidth, or the peak instruction throughput, or the PCI Express bandwidth limit when GPUs or FPGAs are used. The thesis demonstrates that in most cases with respect to the available peak performance, GPU implementations can be as efficient as their CPU counterparts. With respect to costs or power consumption, they are much more efficient. For this purpose, complex tasks must be split in serial as well as parallel parts and the execution must be pipelined such that the CPU bound tasks are hidden behind GPU execution. Few cases are identified where this is not possible due to PCI Express limitations or not reasonable because practical GPU languages are missing.

Quarks and gluons are the building blocks of all hadronic matter, like protons and neutrons. Their interaction is described by Quantum Chromodynamics (QCD), a theory under test by large scale experiments like the Large Hadron Collider (LHC) at CERN and in the future at the Facility for Antiproton and Ion Research (FAIR) at GSI. However, perturbative methods can only be applied to QCD for high energies. Studies from first principles are possible via a discretization onto an Euclidean space-time grid. This discretization of QCD is called Lattice QCD (LQCD) and is the only ab-initio option outside of the high-energy regime. LQCD is extremely compute and memory intensive. In particular, it is by definition always bandwidth limited. Thus—despite the complexity of LQCD applications—it led to the development of several specialized compute platforms and influenced the development of others. However, in recent years General-Purpose computation on Graphics Processing Units (GPGPU) came up as a new means for parallel computing. Contrary to machines traditionally used for LQCD, graphics processing units (GPUs) are a massmarket product. This promises advantages in both the pace at which higher-performing hardware becomes available and its price. CL2QCD is an OpenCL based implementation of LQCD using Wilson fermions that was developed within this thesis. It operates on GPUs by all major vendors as well as on central processing units (CPUs). On the AMD Radeon HD 7970 it provides the fastest double-precision D= kernel for a single GPU, achieving 120GFLOPS. D=—the most compute intensive kernel in LQCD simulations—is commonly used to compare LQCD platforms. This performance is enabled by an in-depth analysis of optimization techniques for bandwidth-limited codes on GPUs. Further, analysis of the communication between GPU and CPU, as well as between multiple GPUs, enables high-performance Krylov space solvers and linear scaling to multiple GPUs within a single system. LQCD calculations require a sampling of the phase space. The hybrid Monte Carlo (HMC) algorithm performs this. For this task, a single AMD Radeon HD 7970 GPU provides four times the performance of two AMD Opteron 6220 running an optimized reference code. The same advantage is achieved in terms of energy-efficiency. In terms of normalized total cost of acquisition (TCA), GPU-based clusters match conventional large-scale LQCD systems. Contrary to those, however, they can be scaled up from a single node. Examples of large GPU-based systems are LOEWE-CSC and SANAM. On both, CL2QCD has already been used in production for LQCD studies.