Institutes
Refine
Year of publication
- 2012 (29) (remove)
Document Type
- Doctoral Thesis (18)
- Article (7)
- Bachelor Thesis (3)
- Master's Thesis (1)
Has Fulltext
- yes (29)
Is part of the Bibliography
- no (29)
Keywords
- ALICE (1)
- Activation (1)
- Attenuated Total Reflection (1)
- Beer (1)
- Beschleunigerphysik (1)
- Chemometry (1)
- Correlated systems (1)
- Density functional theory (1)
- Drift Tube Linac (1)
- Dynamical mean field theory (1)
Institute
Infrared spectroscopy in combination with a specially developed attenuated total reflection (ATR) flow cell and multivariate analysis was used for the quantitative analysis of beer and other beverages. IR spectra of samples were obtained in the range from below 1000 cm-1 to 4000 cm-1 and subjected to a multivariate analysis based on calibration sets with laboratory reference standards. In the case of beer, this calibration set included 240 beer samples spanning the entire range of ethanol content, extract and CO2. Based on this calibration, an infrared and UV/Vis spectroscopy-based sensor for the quick and quantitative quality control of beer was developed and subjected to extensive tests in breweries. This sensor meets and exceeds all requirements from brewers for the routine control in the production and bottling. Its use for other beverages, for example wine, juices or apple wine, requires only another set of calibration data for the specific beverage.
We investigate the ratios βη≡η/τπ and βζ≡ζ/τΠ, i.e., the ratios of shear, η, and bulk, ζ, viscosities to the relaxation times τπ, τΠ of the shear stress tensor and bulk viscous pressure, respectively, in the framework of causal relativistic dissipative fluid dynamics. These viscous transport coefficients are computed both in a field-theoretical and a kinetic approach based on the Boltzmann equation. Our results differ from those of the traditional Boltzmann calculation by Israel and Stewart. The new expressions for the viscous transport coefficients agree with the results obtained in the field-theoretical approach when the contributions from pair annihilation and creation (PAC) are neglected. The latter induce non-negligible corrections to the viscous transport coefficients.
Using a microscopic transport model we investigate the evolution of conical structures originating from the supersonic projectile moving through the hot matter of ultrarelativistic particles. Using different scenarios for the interaction between projectile and matter, and different transport properties of the matter, we study the formation and structure of Mach cones. Especially, a dependence of the Mach cone angle on the details and rate of the energy deposition from projectile to the matter is investigated. Furthermore, the two-particle correlations extracted from the numerical calculations are compared to an analytical approximation. We find that the propagation of a high energetic particle through the matter does not lead to the appearance of a double peak structure as observed in the ultrarelativistic heavy-ion collision experiments. The reason is the strongly forward-peaked energy and momentum deposition in the head shock region. In addition, by adjusting the cross section we investigate the influence of the viscosity to the structure of Mach cones. A clear and unavoidable smearing of the profile depending on a finite ratio of shear viscosity to entropy density is clearly visible.
Driven by the loss of energy, isolated rotating neutron stars (pulsars) are gradually slowing down to lower frequencies, which increases the tremendous compression of the matter inside of them. This increase in compression changes both the global properties of rotating neutron stars as well as their hadronic core compositions. Both effects may register themselves observationally in the thermal evolution of such stars, as demonstrated in this Letter. The rotation-driven particle process which we consider here is the direct Urca (DU) process, which is known to become operative in neutron stars if the number of protons in the stellar core exceeds a critical limit of around 11% to 15%. We find that neutron stars spinning down from moderately high rotation rates of a few hundred Hertz may be creating just the right conditions where the DU process becomes operative, leading to an observable effect (enhanced cooling) in the temperature evolution of such neutron stars. As it turns out, the rotation-driven DU process could explain the unusual temperature evolution observed for the neutron star in Cas A, provided the mass of this neutron star lies in the range of 1.5 to 1.9M⊙ and its rotational frequency at birth was between 40 (400 Hz) and 70% (800 Hz) of the Kepler (mass shedding) frequency, respectively.
The spatial configuration of initial partons in high multiplicity proton–proton scatterings at 14 TeV is assumed as three randomly positioned “hot spots”. The parton momentum distribution in the hot spots is calculated by HIJING2.0 with some modifications. This initial condition causes not only large eccentricity ϵ2 but also triangularity ϵ3 and the correlation of ϵ2−ϵ3 event-plane angles. The final elliptic flow v2, triangular flow v3, and the correlation of v2−v3 event-plane angles are calculated by using the parton cascade model BAMPS to simulate the space–time parton evolution. Our results show that the v2−v3 correlation is different from that of ϵ2−ϵ3. This finding indicates that translations of different Fourier components of the initial spatial asymmetry to the final flow components are not independent. A dynamical correlation between the elliptic and triangular flow appears during the collective expansion.
We show from first principles the emergence of classical Boltzmann equations from relativistic nonequilibrium quantum field theory as described by the Kadanoff–Baym equations. Our method applies to a generic quantum field, coupled to a collection of background fields and sources, in a homogeneous and isotropic spacetime. The analysis is based on analytical solutions to the full Kadanoff–Baym equations, using the WKB approximation. This is in contrast to previous derivations of kinetic equations that rely on similar physical assumptions, but obtain approximate equations of motion from a gradient expansion in momentum space. We show that the system follows a generalized Boltzmann equation whenever the WKB approximation holds. The generalized Boltzmann equation, which includes off-shell transport, is valid far from equilibrium and in a time dependent background, such as the expanding universe.
We present, in the framework of the interacting hadron resonance gas, an evaluation of thermodynamical quantities. The interaction is modelled via a correction for the finite size of the hadrons. We investigate the sensitivity of the model calculations on the radius of the hadrons, which is a parameter of the model. Our calculations for thermodynamical quantities as energy and entropy densities and pressure are confronted with predictions using the lattice Quantum Chromodynamics (QCD) formalism.
Die vorliegende Arbeit befasst sich mit der Hochfrequenzabstimmung und den Feldoptimierungen zweier Linearbeschleunigerstrukturen für eine in der Entwicklung befindliche Forschungsanlage an der Goethe-Universität in Frankfurt am Main. Ein 4-Rod-RFQ sowie ein IH-Driftröhrenbeschleuniger sollen gekoppelt betrieben, d.h. nicht wie üblich von zwei, sondern nur von einem Hochfrequenz-Sender mit Leistung versorgt werden. Hierdurch lässt sich nicht nur der benötigte Platz reduzieren, sondern auch ein beträchtlicher Teil der Kosten des Projekts einsparen. Um das Verhalten der gekoppelten Beschleuniger genauer vorhersagen zu können, wurden Untersuchungen an bereits gebauten Modellen im Maßstab 1:2 durchgeführt und diese vermessen. Eine Methode zur systematischen Anpassung der Feldverteilung in 4-Rod-RFQs wurde darüber hinaus am einzeln betriebenen RFD-Modell angewandt und optimiert, sowie ein Algorithmus zur Automatisierung entwickelt. Parallel laufende Computersimulationen ermöglichten Vergleiche zu den realen Messwerten. Darüberhinaus konnten Rückschlüsse auf die Genauigkeit der Simulationen am Computermodell gezogen und hier liegende Herausforderungen, auch in Bezug auf die bei FRANZ zum Einsatz kommenden Beschleunigerstrukturen, näher untersucht werden. Hieraus resultierende Empfehlungen für das Design der FRANZ-IH-Struktur konnten gegeben werden und wurden bereits umgesetzt.
An der Goethe Universität in Frankfurt wird ein Konzept für ein magnetostatischen Hochstromspeicherring für Protonen- und Ionenstrahlen entwickelt und untersucht. Zur Zeit stehen dem Experiment zwei Toroidsegmente und eine Volumenionenquelle zur Verfügung. An diesem Aufbau werden Experimente mit dem Ziel die Strahldynamik zu untersuchen und die Strahldiagnose in toroidalen Magnetfeldern zu entwickeln, durchgeführt [Joshi] Für Experimente ist eine Strahldiagnose entlang der starken toroidalen Magnetfelder bis maximal 0, 6T nötig. Dabei sind die zur Verfügung stehenden Strahldiagnoseverfahren zum Einen ein Faraday-Cup und zum Anderen ein entlang des kompletten Aufbaus beweglicher Szintillatordetektor. Der Szintillatordetektor, besteht aus einem Phosphorschirm und einer Kamera, die hinter dem Schirm angebracht ist. [Nonn] Aufgrund der geschlossenen Ringgeometrie und dem Anspruch auf eine hohe Flexibilität des Detektors ist die Konstruktion eines neuen von starken Magnetfeldern unbeeinflussbaren und sehr kompakten Detektors notwendig. Ziel dieser Arbeit ist es, ein allgemeines Strahldiagnoseverfahren zu entwickeln.
Im Rahmen dieser Arbeit wurde die Analyse von Dielektronen im Bereich niedriger Massen für zwei unterschiedliche Magnetfeldstärken des ALICE-L3-Magneten untersucht. Hierfür wurden zwei Arten von Simulationen, volle Simulationen und schnelle Simulationen, jeweils für die Magnetfeldeinstellungen 0, 2 T und 0, 5 T erstellt und verglichen. Zunächst wurde die Konsistenz der vollen und schnellen Simulationen anhand von Monte Carlo Truth Spektren überprüft. Es zeigte sich eine gute Übereinstimmung der invarianten Massenspektren mit Ausnahme der f-Resonanz, die in den schnellen Simulationen fast 3-mal höher lag. Dann wurden die vollen Simulationen der Magnetfeldeinstellung 0, 5 T mit ALICEMessdaten desselben Magnetfeldes verglichen. Hierbei zeigte sich, dass die Messdaten im Hinblick auf die Transversalimpulsverteilung der einzelnen Elektronen um einen Faktor 1, 2 bis 2 und im Hinblick auf die Transversalimpulsverteilung der Paare um einen Faktor 2 bis 2, 5 über den Simulationen lagen. Dies konnte zum Teil auf eine Kontamination durch Pionen zurückgeführt werden. Das Signal-Untergrund-Verhältnis war mit 0, 99 für die Simulationen 6-mal größer als das der Messdaten mit 0, 16. Die normierte Signifikanz der Simulationen von 0, 0044 lag 3,5-mal über dem Wert 0, 0012 der Messdaten. Für die schnellen Simulationen wurden die Effizienzen für einzelne Elektronen benötigt. Diese wurden mithilfe von Boxensimulationen erstellt. Es wurde zwischen den Elektronidentifikationsmethoden TOF optional und TOF required und den Magnetfeldstärken 0, 2 T und 0, 5 T unterschieden. Die Boxensimulationen ergaben, dass bei einem Magnetfeld von 0, 2 T insgesamt mehr Elektronen rekonstruiert und identifiziert werden konnten. Außerdem konnte die Analyse zu niedrigeren Transversalimpulsen hin ausgedehnt werden. Die schnellen Simulationen zeigten, dass eine Reduktion des Magnetfeldes von 0, 5 T auf 0, 2 T eine Erhöhung der Anzahl an gemessenen Paaren um einem Faktor 2, 0 für die Elektronidentifikation TOF optional und um einem Faktor 6, 0 für die Elektronidentifikation TOF required zur Folge hat. Die vollen Simulationen der Elektronidentifikation TOF optional ergaben nach Reduktion des Magnetfeldes eine Verbesserung des Signal-zu-Untergrund-Verhältnisses um 11% von 0, 98 auf 1, 11. Die Signifikanz konnte von 0, 0043 auf 0, 0060, d.h. um 40%, verbessert werden. Für die Elektronidentifikation TOF required erhielt man ein Signal-zu-Untergrund-Verhältnis von 16, 5 (0, q 2 T) und 19, 1 (0, 2 T). Jedoch war die normierte Signifikanz (sgn = sqrt((s exp 2)/2*B)* (1/sqrt(NEv)))) für das reduzierte Magnetfeld 100% höher und lag bei 0, 086, während sie für 0, 5 T einen Wert von 0, 0043 hatte. In der vorliegenden Arbeit konnte gezeigt werden, dass eine Reduktion der Magnetfeldstärke des ALICE-L3-Magneten von 0, 5 T auf 0, 2 T zu Verbesserungen in der Messung von Elektron-Positron-Paaren führt. Als Fazit kann angenommen werden, dass eine Datennahme bei einem reduzierten Magnetfeld von 0, 2 T sinnvoll erscheint.