Refine
Year of publication
Document Type
- Article (25)
- Conference Proceeding (1)
Has Fulltext
- yes (26)
Is part of the Bibliography
- no (26)
Keywords
- focused electron beam induced deposition (6)
- radiation-induced nanostructures (4)
- 3D printing (2)
- Electronic properties and materials (2)
- FEBID (2)
- Nanoscale materials (2)
- Superconducting properties and materials (2)
- additive manufacturing (2)
- atomic force microscopy (2)
- electron beam induced deposition (2)
Institute
- Physik (26)
- Biochemie und Chemie (2)
Focused ion beam induced deposition (FIBID) is a direct-write technique enabling the growth of individual nanostructures of any shape and dimension with high lateral resolution. Moreover, the fast and reliable writing of periodically arranged nanostructures can be used to fabricate devices for the investigation of collective phenomena and to design novel functional metamaterials. Here, FIBID is employed to prepare dc-Josephson junction arrays (dc-JJA) consisting of superconducting NbC dots coupled through the proximity effect via a granular metal layer. The fabrication is straightforward and allows the preparation of dc-JJA within a few seconds. Microstructure and composition of the arrays are investigated by transmission electron microscopy and energy dispersive X-ray spectroscopy. The superconductor-to-metal transition of the prepared dc-JJA is studied in a direct way, by tuning the Josephson junction resistance in 70 nm-spaced superconducting NbC dots. The observed magnetoresistance oscillations with a period determined by the flux quantum give evidence for the coherent charge transport by paired electrons. Moreover, the measured resistance minima correspond to two fundamental matching configurations of fluxons in the dc-JJA, caused by magnetic frustration. The robust properties of the prepared dc-JJA demonstrate the opportunities for a fast preparation of complex device configurations using direct-write approaches.
Vanadium and Manganese Carbonyls as Precursors in Electron-Induced and Thermal Deposition Processes
(2022)
The material composition and electrical properties of nanostructures obtained from focused electron beam-induced deposition (FEBID) using manganese and vanadium carbonyl precursors have been investigated. The composition of the FEBID deposits has been compared with thin films derived by the thermal decomposition of the same precursors in chemical vapor deposition (CVD). FEBID of V(CO)6 gives access to a material with a V/C ratio of 0.63–0.86, while in CVD a lower carbon content with V/C ratios of 1.1–1.3 is obtained. Microstructural characterization reveals for V-based materials derived from both deposition techniques crystallites of a cubic phase that can be associated with VC1−xOx. In addition, the electrical transport measurements of direct-write VC1−xOx show moderate resistivity values of 0.8–1.2 × 103 µΩ·cm, a negligible influence of contact resistances and signatures of a granular metal in the temperature-dependent conductivity. Mn-based deposits obtained from Mn2(CO)10 contain ~40 at% Mn for FEBID and a slightly higher metal percentage for CVD. Exclusively insulating material has been observed in FEBID deposits as deduced from electrical conductivity measurements. In addition, strong tendencies for postgrowth oxidation have to be considered.
Scanning Hall probe microscopy is attractive for minimally invasive characterization of magnetic thin films and nanostructures by measurement of the emanating magnetic stray field. Established sensor probes operating at room temperature employ highly miniaturized spin-valve elements or semimetals, such as Bi. As the sensor layer structures are fabricated by patterning of planar thin films, their adaption to custom-made sensor probe geometries is highly challenging or impossible. Here we show how nanogranular ferromagnetic Hall devices fabricated by the direct-write method of focused electron beam induced deposition (FEBID) can be tailor-made for any given probe geometry. Furthermore, we demonstrate how the magnetic stray field sensitivity can be optimized in situ directly after direct-write nanofabrication of the sensor element. First proof-of-principle results on the use of this novel scanning Hall sensor are shown.
Nano-granular metals are materials that fall into the general class of granular electronic systems in which the interplay of electronic correlations, disorder and finite size effects can be studied. The charge transport in nano-granular metals is dominated by thermally-assisted, sequential and correlated tunneling over a temperature-dependent number of metallic grains. Here we study the frequency-dependent conductivity (AC conductivity) of nano-granular Platinum with Pt nano-grains embedded into amorphous carbon (C). We focus on the transport regime on the insulating side of the insulator metal transition reflected by a set of samples covering a range of tunnel-coupling strengths. In this transport regime polarization contributions to the AC conductivity are small and correlation effects in the transport of free charges are expected to be particularly pronounced. We find a universal behavior in the frequency dependence that can be traced back to the temperature-dependent zero-frequency conductivity (DC conductivity) of Pt/C within a simple lumped-circuit analysis. Our results are in contradistinction to previous work on nano-granular Pd/ZrO2ZrO2 in the very weak coupling regime where polarization contributions to the AC conductivity dominated. We describe possible future applications of nano-granular metals in proximity impedance spectroscopy of dielectric materials.
In this paper we present first-order reversal curve (FORC) diagrams of ensembles of three-dimensional Co3Fe nanostructures as 2 × 2 arrays of nano-cubes and nano-trees. The structures are fabricated and investigated by an advanced platform of focused electron beam induced deposition combined with high-resolution detection of magnetic stray fields using a home-built micro-Hall magnetometer based on an AlGaAs/GaAs heterostructure. The experimental FORC diagrams are compared to macrospin simulations for both geometries at different angles of the externally applied magnetic field. The measured FORC diagrams are in good agreement with the simulated ones and reflect non-uniform magnetization reversal dominated by multi-vortex states within, and strong magnetic coupling between, the building blocks of our nanostructures. Thus, a FORC analysis of small arrays of 3D magnetic nanostructures provides more detailed insights into the mechanisms of magnetization reversal beyond standard major hysteresis loop measurements.
Focused electron beam induced deposition (FEBID) is a direct-write nanofabrication technique able to pattern three-dimensional magnetic nanostructures at resolutions comparable to the characteristic magnetic length scales. FEBID is thus a powerful tool for 3D nanomagnetism which enables unique fundamental studies involving complex 3D geometries, as well as nano-prototyping and specialized applications compatible with low throughputs. In this focused review, we discuss recent developments of this technique for applications in 3D nanomagnetism, namely the substantial progress on FEBID computational methods, and new routes followed to tune the magnetic properties of ferromagnetic FEBID materials. We also review a selection of recent works involving FEBID 3D nanostructures in areas such as scanning probe microscopy sensing, magnetic frustration phenomena, curvilinear magnetism, magnonics and fluxonics, offering a wide perspective of the important role FEBID is likely to have in the coming years in the study of new phenomena involving 3D magnetic nanostructures.
Der 3D‐Druck von geometrisch komplexen Nanostrukturen ist auf dem Weg zu ersten Anwendungen. Die Auswahl an geeigneten Materialien ermöglicht metallische, halbleitende, isolierende, supraleitende und exotische magnetische Eigenschaften. Das 3D‐FEBID‐Verfahren schreibt mit dem Elektronenstrahl eines Raster‐Elektronenmikroskops wie mit einem Nanostift. Das Material wird als Gasstrom von Precursor‐Molekülen über eine Hohlnadel zugeführt. Der Elektronenstrahl ermöglicht die hochlokale Fragmentierung dieser Moleküle, die meist metallische Zielatome enthalten. Die lokale Verweildauer des Strahls steuert den Strukturaufbau in der Vertikalen, während seine seitliche Bewegung zu geneigten, freistehenden Strukturen führt. Eine Herausforderung ist die definierte Strahlsteuerung, um ein CAD‐Modell möglichst präzise in ein reales 3D‐Nanoobjekt zu überführen. Für die Zukunft soll eine simulationsgestützte Software zur Steuerung des Elektronenstrahls auch Laien die Anwendung erleichtern. 3D‐FEBID ist bereits heute ein zuverlässiges und in vielerlei Hinsicht einzigartiges Verfahren zur Direktabscheidung funktionaler Nanostrukturen.
Scanning probe microscopy (SPM) has become an essential surface characterization technique in research and development. By concept, SPM performance crucially depends on the quality of the nano-probe element, in particular, the apex radius. Now, with the development of advanced SPM modes beyond morphology mapping, new challenges have emerged regarding the design, morphology, function, and reliability of nano-probes. To tackle these challenges, versatile fabrication methods for precise nano-fabrication are needed. Aside from well-established technologies for SPM nano-probe fabrication, focused electron beam-induced deposition (FEBID) has become increasingly relevant in recent years, with the demonstration of controlled 3D nanoscale deposition and tailored deposit chemistry. Moreover, FEBID is compatible with practically any given surface morphology. In this review article, we introduce the technology, with a focus on the most relevant demands (shapes, feature size, materials and functionalities, substrate demands, and scalability), discuss the opportunities and challenges, and rationalize how those can be useful for advanced SPM applications. As will be shown, FEBID is an ideal tool for fabrication/modification and rapid prototyping of SPM-tipswith the potential to scale up industrially relevant manufacturing.
Focused electron and ion beam-induced deposition (FEBID/FIBID) are direct-write techniques with particular advantages in three-dimensional (3D) fabrication of ferromagnetic or superconducting nanostructures. Recently, two novel precursors, HCo 3 Fe(CO) 12 and Nb(NMe 3 ) 2 (N-t-Bu), were introduced, resulting in fully metallic CoFe ferromagnetic alloys by FEBID and superconducting NbC by FIBID, respectively. In order to properly define the writing strategy for the fabrication of 3D structures using these precursors, their temperature-dependent average residence time on the substrate and growing deposit needs to be known. This is a prerequisite for employing the simulation-guided 3D computer aided design (CAD) approach to FEBID/FIBID, which was introduced recently. We fabricated a series of rectangular-shaped deposits by FEBID at different substrate temperatures between 5 ∘ C and 24 ∘ C using the precursors and extracted the activation energy for precursor desorption and the pre-exponential factor from the measured heights of the deposits using the continuum growth model of FEBID based on the reaction-diffusion equation for the adsorbed precursor.
By the fabrication of periodically arranged nanomagnetic systems it is possible to engineer novel physical properties by realizing artificial lattice geometries that are not accessible via natural crystallization or chemical synthesis. This has been accomplished with great success in two dimensions in the fields of artificial spin ice and magnetic logic devices, to name just two. Although first proposals have been made to advance into three dimensions (3D), established nanofabrication pathways based on electron beam lithography have not been adapted to obtain free-form 3D nanostructures. Here we demonstrate the direct-write fabrication of freestanding ferromagnetic 3D nano-architectures. By employing micro-Hall sensing, we have determined the magnetic stray field generated by our free-form structures in an externally applied magnetic field and we have performed micromagnetic and macro-spin simulations to deduce the spatial magnetization profiles in the structures and analyze their switching behavior. Furthermore we show that the magnetic 3D elements can be combined with other 3D elements of different chemical composition and intrinsic material properties.