Refine
Document Type
- Article (8)
- Review (1)
- Working Paper (1)
Has Fulltext
- yes (10)
Is part of the Bibliography
- no (10)
Keywords
- Acuris (2)
- CAD/CAM (2)
- Bacterial leakage (1)
- Breast cancer (1)
- CAD/ CAM crown (1)
- CAD/CAM crown (1)
- Cancer genomics (1)
- Cement gap (1)
- Conometric connection (1)
- Edentulous jaw (1)
Institute
- Medizin (6)
- Biochemie und Chemie (1)
- Geographie (1)
- Rechtswissenschaft (1)
Die EU verabschiedete am 21. Mai 1992 die Richtlinie zur Erhaltung der natürlichen Lebensräume sowie der wildlebenden Tiere und Pflanzen, die sogenannte Fauna-Flora-Habitat-Richtlinie (FFH-Richtlinie). Die Mitgliedsstaaten sind seitdem verpflichtet, ein europaweites Netz von besonderen Schutzgebieten zur Erhaltung der biologischen Vielfalt und zur Förderung einer nachhaltigen Entwicklung aufzubauen. In dieses Natura 2000 genannte Netz sind auch die auf der Grundlage der seit 1979 geltenden EU-Vogelschutzrichtlinie gemeldeten Europäischen Vogelschutzgebiete (EU SPA) integriert. Die reichhaltige Naturausstattung Sachsen-Anhalts ermöglichte die Auswahl von 265 FFH-Gebieten und 32 Vogelschutzgebieten (EU SPA). Die Gebiete wurden als „Gebiete von gemeinschaftlicher Bedeutung der kontinentalen und der atlantischen biogeographischen Region“ im Amtsblatt der EU vom 15.01.2008 veröffentlicht. Nach den Vorgaben der FFH- und Vogelschutzrichtlinie sind die Natura 2000-Gebiete nun als besondere Schutzgebiete national zu sichern. Darüber hinaus sind in den besonderen Schutzgebieten geeignete Maßnahmen zu treffen, um die Verschlechterung der natürlichen Lebensräume und der Habitate der Arten, für die die Gebiete ausgewiesen worden sind, zu vermeiden (vgl. Art. 6, Abs. 2 FFH Richtlinie). Alle erforderlichen Maßnahmen sind an den Ansprüchen der in den jeweiligen Gebieten vorkommenden Lebensraumtypen und Arten auszurichten.
Mit dem vorliegenden Sonderheft wird beispielhaft der Verfahrensweg der Ausweisung des Naturschutzgebietes Aland-Elbe-Niederung zur Umsetzung von Natura 2000 im Land Sachsen-Anhalt dokumentiert. Neben der Darstellung der naturräumlichen Situation des Gebietes und seiner naturschutzfachlichen Bedeutung werden insbes. Inhalt und Ablauf des Verwaltungsverfahrens sowie die Lösung der vielfältigen Nutzungskonflikte dargestellt. Dem Heft liegt eine beidseitig bedruckte Schutzgebietskarte des Landes Sachsen-Anhalt im Maßstab 1:250.000 bei. Auf einer Seite sind Schutzgebiete nach internationalem Recht dargestellt. Die zweite Seite der Karte liefert eine aktuelle Zusammenstellung (Stand 31.12.2009) der nach Landesnaturschutzrecht geschützten Gebiete und Objekte. Ein Beiheft mit Namen, Bezeichnung und Größe aller Gebiete komplettiert die Ausgabe.
Mobilität ist eine Grundvoraussetzung, um am gesellschaftlichen Leben teilhaben zu können. Ist der Möglichkeitsraum potenzieller Ortsveränderungen eingeschränkt – beispielsweise durch räumliche, finanzielle oder körperliche Barrieren oder Ängste –, wird von Mobilitätsarmut gesprochen. Wie Mobilitätsarmut auf der Verwaltungsebene verhindert werden kann, zeigt dieser Policy Brief des Projektes Social2Mobility. Diese Handlungsempfehlungen basieren auf Erkenntnissen des Projektes Social2Mobility und adressieren insbesondere Verwaltungsmitarbeitende der Fachplanungen Verkehrs-, Raum- und Sozialplanung von der Kommunal- bis zur Landes- und Bundesebene. Ziel des Projektes Social2Mobility war es, die soziale Teilhabe armutsgefährdeter Personen durch eine Steigerung ihrer Mobilitätsoptionen zu stärken. Der Policy Brief erläutert die Problematik von Mobilitätsarmut, thematisiert deren Relevanz und zeigt verschiedene Facetten von Mobilitätsarmut auf. Er beinhaltet fünf verschiedene Handlungsfelder zur Verhinderung von Mobilitätsarmut. Der Policy Brief soll zu einer dezernats- und abteilungsübergreifenden Zusammenarbeit der Fachplanungen Sozial-, Raum- und Verkehrsplanung zur Lösung von Mobilitätsarmut anregen. Synergieeffekte und gegenseitige Potentiale bei einer Zusammenarbeit werden dabei herausgestellt. Hierzu gehören beispielsweise die Anwendung von Verkehrsnachfragemodellen in der Sozialplanung oder die Berücksichtigung vielfältiger unterschiedlicher Lebenslagen und der daraus hervorgehenden Mobilitätsbedarfe in der Verkehrsplanung.
The transcription factor ∆Np63 is a master regulator of epithelial cell identity and essential for the survival of squamous cell carcinoma (SCC) of lung, head and neck, oesophagus, cervix and skin. Here, we report that the deubiquitylase USP28 stabilizes ∆Np63 and maintains elevated ∆NP63 levels in SCC by counteracting its proteasome‐mediated degradation. Impaired USP28 activity, either genetically or pharmacologically, abrogates the transcriptional identity and suppresses growth and survival of human SCC cells. CRISPR/Cas9‐engineered in vivo mouse models establish that endogenous USP28 is strictly required for both induction and maintenance of lung SCC. Our data strongly suggest that targeting ∆Np63 abundance via inhibition of USP28 is a promising strategy for the treatment of SCC tumours.
Glioblastoma is the most common malignant primary brain tumor. To date, clinically relevant biomarkers are restricted to isocitrate dehydrogenase (IDH) gene 1 or 2 mutations and O6-methylguanine DNA methyltransferase (MGMT) promoter methylation. Long non-coding RNAs (lncRNAs) have been shown to contribute to glioblastoma pathogenesis and could potentially serve as novel biomarkers. The clinical significance of HOXA Transcript Antisense RNA, Myeloid-Specific 1 (HOTAIRM1) was determined by analyzing HOTAIRM1 in multiple glioblastoma gene expression data sets for associations with prognosis, as well as, IDH mutation and MGMT promoter methylation status. Finally, the role of HOTAIRM1 in glioblastoma biology and radiotherapy resistance was characterized in vitro and in vivo. We identified HOTAIRM1 as a candidate lncRNA whose up-regulation is significantly associated with shorter survival of glioblastoma patients, independent from IDH mutation and MGMT promoter methylation. Glioblastoma cell line models uniformly showed reduced cell viability, decreased invasive growth and diminished colony formation capacity upon HOTAIRM1 down-regulation. Integrated proteogenomic analyses revealed impaired mitochondrial function and determination of reactive oxygen species (ROS) levels confirmed increased ROS levels upon HOTAIRM1 knock-down. HOTAIRM1 knock-down decreased expression of transglutaminase 2 (TGM2), a candidate protein implicated in mitochondrial function, and knock-down of TGM2 mimicked the phenotype of HOTAIRM1 down-regulation in glioblastoma cells. Moreover, HOTAIRM1 modulates radiosensitivity of glioblastoma cells both in vitro and in vivo. Our data support a role for HOTAIRM1 as a driver of biological aggressiveness, radioresistance and poor outcome in glioblastoma. Targeting HOTAIRM1 may be a promising new therapeutic approach.
"Nothing is more soothing to the nerves than a detailed discussion of homage and lordship …" If William de Briwerr, fictional English knight and narrator in Alfred Duggan’s historical novel Lord Geoffrey’s Fancy, is right, then a conference held in April 2011 will have set the participants at ease. Following the call of the Konstanzer Arbeitskreis für mittelalterliche Geschichte and the conference organiser, Karl-Heinz Spieß, they had gathered to discuss the "Formation and dissemination of feudalism in the Empire and in Italy during the 12th and 13th century". The conference proceedings have now been published, and I suppose William de Briwerr would have approved of the intensity of discussion contained therein. ...
Objectives: A conometric concept was recently introduced in which conical implant abutments hold the matching crown copings by friction alone, eliminating the need for cement or screws. The aim of this in vitro study was to assess the presence of microgap formation and bacterial leakage at the Acuris conometric restorative interface of three different implant abutment systems. Material and methods: A total of 75 Acuris samples of three implant-abutment systems (Ankylos, Astra Tech EV, Xive) were subjected to microbiological (n = 60) and scanning electron microscopic (SEM) investigation (n = 15). Bacterial migration into and out of the conical coupling system were analyzed in an anaerobic workstation for 48, 96, 144, and 192 h. Bacterial DNA quantification using qrt-PCR was performed at each time point. The precision of the conometric coupling and internal fit of cemented CAD/CAM crowns on corresponding Acuris TiN copings were determined by means of SEM. Results: qrt-PCR results failed to demonstrate microbial leakage from or into the Acuris system. SEM analysis revealed minute punctate microgaps at the apical aspect of the conometric junction (2.04 to 2.64 µm), while mean cement gaps of 12 to 145 µm were observed at the crown-coping interface. Conclusions: The prosthetic morse taper connection of all systems examined does not allow bacterial passage. Marginal integrity and internal luting gap between the ceramic crown and the coping remained within the clinically acceptable limits. Clinical relevance: Conometrically seated single crowns provide sufficient sealing efficiency, relocating potential misfits from the crown-abutment interface to the crown-coping interface.
Manufacturing processes of custom implant abutments may contaminate their surfaces with micro wear deposits and generic pollutants. Such particulate debris, if not removed, might be detrimental and provoke inflammatory reactions in peri-implant tissues. Although regulatory guidelines for adequate cleaning, disinfection, or sterilization exist, there does not appear to be a consistent application and data on the amount and extent of such contaminants is lacking. The aim of the present in vitro study was to evaluate the quality and quantity of processing-related surface contamination of computer-aided design/computer-aided manufacturing (CAD/CAM) abutments in the state of delivery and after ultrasonic cleaning. A total of 28 CAD/CAM monotype and hybrid abutments were cleaned and disinfected applying a three-stage ultrasonic protocol (Finevo protocol). Before and after cleaning, the chemical composition and the contamination of the abutments were assessed using scanning electron microscopy (SEM), dispersive X-ray spectroscopy(EDX),andcomputer-aidedplanimetricmeasurement(CAPM).Inthedeliverycondition, monotype abutments showed a significantly higher amount of debris compared to hybrid abutments (4.86±6.10% vs. 0.03 ± 0.03%, p < 0.001). The polishing process applied in the laboratory after bonding the hybrid abutment components reduces the surface roughness and thus contributes substantially to their purity. The extent of contamination caused by computer-aided manufacturing of custom abutments can be substantially minimized using a three-stage ultrasonic protocol.
Background: Due to their increased precision, CAD/CAM generated bars (Computer-Aided Design/ Computer-Aided Manufacturing) are increasingly utilized in implant prosthodontics. For optimal clinical results, surface morphology should promote the integration of soft tissue while minimizing plaque and bacterial retention.
Objective: Despite their clinical use, only limited information on the biological and clinical surface quality of CAD/CAM milled bars is available. The aim of the study was therefore to characterize the surface topography of bars of different manufacturers based on the profilometric analysis and the need for manual post-processing in the laboratory.
Methods: A custom mandibular edentulous cast with four anterior implants was used as a reference cast and reproduced eight times. On each reproduction cast, corresponding scan flags were positioned and digitized. Acrylic 3D printed bar frameworks were produced and sent to the respective production center along with the digital files of the CAD bars for milling. In the course of profilometric analysis, all bars were examined in three critical Regions of Interest (ROI): Transmucosal, labial, basal. Sa and Ra values of each construction were determined. To evaluate the necessary refinishing time eight dental technicians macroscopically evaluated the bars by performing a subjective visual inspection. Kruskal-Wallis H-tests and Tukey and Kramer's post hoc tests were applied to detect differences between the samples.
Results: After profilometric examination, three specimens (Dentsply Sirona: ZDC; Straumann: ZST; CAMLOG: ZCC) demonstrated surface roughness values in the biological acceptable range (Sa 0.2-0.4 μm) in the transmucosal region and provided optimal conditions for a reliable soft tissue adaptation. The Ra measurements revealed values beyond the acceptable threshold in the transmucosal region for three bars (Straumann: ZST; Dentsply Sirona: ZDC; Amann Girrbach: LAC). Four bars (LAC: Amann Girrbach; ZBC: BEGO; Datron: LDC & LDT; Zirkonzahn: ZZC) needed undesirable extensive manual rework. The evaluation of quality and time for manual post-processing by dental technicians confirmed the measurement-based ranking of the bars.
Conclusion: It is desirable to define a clear roughness threshold for the clinical acceptance of transmucosal CAD/CAM generated surfaces. Clinical studies with profilometric data could help to further improve the surface quality of CAD/CAM milled bars and reduce the need for manual reworking time and effort.
Background: Glucose metabolism in the tumor-microenvironment is a fundamental hallmark for tumor growth and intervention therein remains an attractive option for anti-tumor therapy. Whether tumor-derived factors such as microRNAs (miRs) regulate glucose metabolism in stromal cells, especially in tumor-associated macrophages (TAMs), to hijack them for trophic support, remains elusive.
Methods: Ago-RIP-Seq identified macrophage lactate dehydrogenase B (LDHB) as a target of tumor-derived miR-375 in both 2D/3D cocultures and in murine TAMs from a xenograft mouse model. The prognostic value was analyzed by ISH and multiplex IHC of breast cancer patient tissues. Functional consequences of the miR-375-LDHB axis in TAMs were investigated upon mimic/antagomir treatment by live metabolic flux assays, GC/MS, qPCR, Western blot, lentiviral knockdown and FACS. The therapeutic potential of a combinatorial miR-375-decoy/simvastatin treatment was validated by live cell imaging.
Results: Macrophage LDHB decreased in murine and human breast carcinoma. LDHB downregulation increase aerobic glycolysis and lactagenesis in TAMs in response to tumor-derived miR-375. Lactagenesis reduced fatty acid synthesis but activated SREBP2, which enhanced cholesterol biosynthesis in macrophages. LDHB downregulation skewed TAMs to function as a lactate and sterol/oxysterol source for the proliferation of tumor cells. Restoring of LDHB expression potentiated inhibitory effects of simvastatin on tumor cell proliferation.
Conclusion: Our findings identified a crucial role of LDHB in macrophages and established tumor-derived miR-375 as a novel regulator of macrophage metabolism in breast cancer, which might pave the way for strategies of combinatorial cancer cell/stroma cell interventions.
Encouraging clinical results were reported on a novel cone-in-cone coupling for the fixation of dental implant-supported crowns (Acuris, Dentsply Sirona Implants, Mölndal, Sweden). However, the presence or absence of a microgap and a potential bacterial leakage at the conometric joint has not yet been investigated. A misfit and a resulting gap between the conometric components could potentially serve as a bacterial reservoir that promotes plaque formation, which in turn may lead to inflammation of the peri-implant tissues. Thus, a two-fold study set-up was designed in order to evaluate the bidirectional translocation of bacteria along conometrically seated single crowns. On conometric abutments filled with a culture suspension of anaerobic bacteria, the corresponding titanium nitride-coated (TiN) caps were fixed by friction. Each system was sterilized and immersed in culture medium to provide an optimal environment for microbial growth. Positive and negative controls were prepared. Specimens were stored in an anaerobic workstation, and total and viable bacterial counts were determined. Every 48 h, samples were taken from the reaction tubes to inoculate blood agar plates and to isolate bacterial DNA for quantification using qrt-PCR. In addition, one Acuris test system was subjected to scanning electron microscopy (SEM) to evaluate the precision of fit of the conometric coupling and marginal crown opening. Throughout the observational period of one week, blood agar plates of the specimens showed no viable bacterial growth. qrt-PCR, likewise, yielded a result approaching zero with an amount of about 0.53 × 10−4 µg/mL DNA. While the luting gap/marginal opening between the TiN-cap and the ceramic crown was within the clinically acceptable range, the SEM analysis failed to identify a measurable microgap at the cone-in-cone junction. Within the limits of the in-vitro study it can be concluded that the Acuris conometric interface does not allow for bacterial translocation under non-dynamic loading conditions.
