Refine
Year of publication
Document Type
- Preprint (521)
- Article (288)
- Conference Proceeding (12)
- Part of a Book (5)
- Report (3)
- Working Paper (1)
Has Fulltext
- yes (830) (remove)
Is part of the Bibliography
- no (830)
Keywords
- Heavy Ion Experiments (20)
- Hadron-Hadron scattering (experiments) (11)
- Hadron-Hadron Scattering (8)
- Heavy-ion collision (5)
- Collective Flow (4)
- Quark-Gluon Plasma (4)
- Europa (3)
- Hagen <2001> (3)
- Jets (3)
- Jets and Jet Substructure (3)
- Kongress (3)
- Mehrsprachigkeit (3)
- Experimental nuclear physics (2)
- Experimental particle physics (2)
- Heavy Quark Production (2)
- Lepton-Nucleon Scattering (experiments) (2)
- Particle Correlations and Fluctuations (2)
- Particle and resonance production (2)
- Particle correlations and fluctuations (2)
- ALICE detector (1)
- Anti-nuclei (1)
- Atherosclerosis (1)
- Boosted Jets (1)
- CVID (1)
- Cardiovascular diseases (1)
- Collective Flow, (1)
- Electron-pion identification (1)
- Electroweak interaction (1)
- European Society for Immunodeficiencies (ESID) (1)
- Fibre/foam sandwich radiator (1)
- German PID-NET registry (1)
- Germany (1)
- Hadron-Hadron Scattering Heavy (1)
- Hadron-hadron interactions (1)
- Hard Scattering (1)
- Health risk analysis (1)
- Heavy Ion Experiment (1)
- IgG substitution therapy (1)
- Ionisation energy loss (1)
- Italy (1)
- Jet Physics (1)
- Jet Substructure (1)
- LHC (1)
- Material budget (1)
- Multi-Parton Interactions (1)
- Multi-wire proportional drift chamber (1)
- Myocardial infarction (1)
- Neural network (1)
- PID prevalence (1)
- Particle and Resonance Production (1)
- Pb–Pb collisions (1)
- Properties of Hadrons (1)
- Q-factor (1)
- QCD (1)
- Quark Deconfinement (1)
- Quark Gluon Plasma (1)
- Quark Production (1)
- Quarkonium (1)
- Relativistic heavy-ion collisions (1)
- Stroke (1)
- Sweden (1)
- TR (1)
- Tracking (1)
- Transition radiation detector (1)
- Trigger (1)
- Vector Boson Production (1)
- Voltri Massif (1)
- Xenon-based gas mixture (1)
- dE/dx (1)
- detector (1)
- electromagnetic field (1)
- experimental results (1)
- fluid-rock interactions (1)
- heavy ion experiments (1)
- magnesium metasomatism (1)
- measurement (1)
- primary immunodeficiency (PID) (1)
- quark gluon plasma (1)
- registry for primary immunodeficiency (1)
- subduction zones (1)
Institute
- Physik (816)
- Frankfurt Institute for Advanced Studies (FIAS) (727)
- Informatik (696)
- Neuere Philologien (10)
- Informatik und Mathematik (3)
- Geowissenschaften (2)
- Medizin (2)
- Hochschulrechenzentrum (1)
We present a measurement of azimuthal correlations between inclusive J/ψ and charged hadrons in p–Pb collisions recorded with the ALICE detector at the CERN LHC. The J/ψ are reconstructed at forward (p-going, 2.03<y<3.53) and backward (Pb-going, −4.46<y<−2.96) rapidity via their μ+μ− decay channel, while the charged hadrons are reconstructed at mid-rapidity (|η|<1.8). The correlations are expressed in terms of associated charged-hadron yields per J/ψ trigger. A rapidity gap of at least 1.5 units is required between the trigger J/ψ and the associated charged hadrons. Possible correlations due to collective effects are assessed by subtracting the associated per-trigger yields in the low-multiplicity collisions from those in the high-multiplicity collisions. After the subtraction, we observe a strong indication of remaining symmetric structures at Δφ≈0 and Δφ≈π, similar to those previously found in two-particle correlations at middle and forward rapidity. The corresponding second-order Fourier coefficient (v2) in the transverse momentum interval between 3 and 6 GeV/c is found to be positive with a significance of about 5σ. The obtained results are similar to the J/ψ v2 coefficients measured in Pb–Pb collisions at sNN=5.02 TeV, suggesting a common mechanism at the origin of the J/ψ v2.
The measurement of the production of charm jets, identified by the presence of a D0 meson in the jet constituents, is presented in proton–proton collisions at centre-of-mass energies of √s = 5.02 and 13 TeV with the ALICE detector at the CERN LHC. The D0 mesons were reconstructed from their hadronic decay D0 → K−π+ and the respective charge conjugate. Jets were reconstructed from D0-meson candidates and charged particles using the anti-kT algorithm, in the jet transverse momentum range 5 < pT,chjet < 50 GeV/c, pseudorapidity |ηjet| < 0.9 − R, and with the jet resolution parameters R = 0.2, 0.4, 0.6. The distribution of the jet momentum fraction carried by a D0 meson along the jet axis (z ch) was measured in the range 0.4 < z ch < 1.0 in four ranges of the jet transverse momentum. Comparisons of results for different collision energies and jet resolution parameters are also presented. The measurements are compared to predictions from Monte Carlo event generators based on leading-order and next-to-leading-order perturbative quantum chromodynamics calculations. A generally good description of the main features of the data is obtained in spite of a few discrepancies at low pT,chjet. Measurements were also done for R = 0.3 at √s = 5.02 and are shown along with their comparisons to theoretical predictions in an appendix to this paper.
Hadronic resonances are used to probe the hadron gas produced in the late stage of heavy-ion collisions since they decay on the same timescale, of the order of 1 to 10 fm/c, as the decoupling time of the system. In the hadron gas, (pseudo)elastic scatterings among the products of resonances that decayed before the kinetic freeze-out and regeneration processes counteract each other, the net effect depending on the resonance lifetime, the duration of the hadronic phase, and the hadronic cross sections at play. In this context, the Σ(1385)± particle is of particular interest as models predict that regeneration dominates over rescattering despite its relatively short lifetime of about 5.5 fm/c. The first measurement of the Σ(1385)± resonance production at midrapidity in Pb-Pb collisions at sNN−−−√=5.02 TeV with the ALICE detector is presented in this Letter. The resonances are reconstructed via their hadronic decay channel, Λπ, as a function of the transverse momentum (pT) and the collision centrality. The results are discussed in comparison with the measured yield of pions and with expectations from the statistical hadronization model as well as commonly employed event generators, including PYTHIA8/Angantyr and EPOS3 coupled to the UrQMD hadronic cascade afterburner. None of the models can describe the data. For Σ(1385)±, a similar behaviour as K∗(892)0 is observed in data unlike the predictions of EPOS3 with afterburner.
An excess of J/ψ yield at very low transverse momentum (pT<0.3 GeV/c), originating from coherent photoproduction, is observed in peripheral and semicentral hadronic Pb–Pb collisions at a center-of-mass energy per nucleon pair of sNN=5.02 TeV. The measurement is performed with the ALICE detector via the dimuon decay channel at forward rapidity (2.5<y<4). The nuclear modification factor at very low pT and the coherent photoproduction cross section are measured as a function of centrality down to the 10% most central collisions. These results extend the previous study at sNN=2.76 TeV, confirming the clear excess over hadronic production in the pT range 0−0.3 GeV/c and the centrality range 70–90%, and establishing an excess with a significance greater than 5σ also in the 50–70% and 30–50% centrality ranges. The results are compared with earlier measurements at sNN=2.76 TeV and with different theoretical predictions aiming at describing how coherent photoproduction occurs in hadronic interactions with nuclear overlap.
An excess of J/ψ yield at very low transverse momentum (pT<0.3 GeV/c), originating from coherent photoproduction, is observed in peripheral and semicentral hadronic Pb−Pb collisions at a center-of-mass energy per nucleon pair of sNN−−−√=5.02 TeV. The measurement is performed with the ALICE detector via the dimuon decay channel at forward rapidity (2.5<y<4). The nuclear modification factor at very low pT and the coherent photoproduction cross section are measured as a function of centrality down to the 10% most central collisions. These results extend the previous study at sNN−−−√=2.76 TeV, confirming the clear excess over hadronic production in the pT range 0−0.3 GeV/c and the centrality range 70−90%, and establishing an excess with a significance greater than 5σ also in the 50−70% and 30−50% centrality ranges. The results are compared with earlier measurements at sNN−−−√=2.76 TeV and with different theoretical predictions aiming at describing how coherent photoproduction occurs in hadronic interactions with nuclear overlap.
Measurement of anti-3He nuclei absorption in matter and impact on their propagation in the Galaxy
(2022)
In our Galaxy, light antinuclei composed of antiprotons and antineutrons can be produced through high-energy cosmic-ray collisions with the interstellar medium or could also originate from the annihilation of dark-matter particles that have not yet been discovered. On Earth, the only way to produce and study antinuclei with high precision is to create them at high-energy particle accelerators. Although the properties of elementary antiparticles have been studied in detail, the knowledge of the interaction of light antinuclei with matter is limited. We determine the disappearance probability of 3He when it encounters matter particles and annihilates or disintegrates within the ALICE detector at the Large Hadron Collider. We extract the inelastic interaction cross section, which is then used as an input to the calculations of the transparency of our Galaxy to the propagation of 3He stemming from dark-matter annihilation and cosmic-ray interactions within the interstellar medium. For a specifc dark-matter profle, we estimate a transparency of about 50%, whereas it varies with increasing 3He momentum from 25% to 90% for cosmic-ray sources. The results indicate that 3He nuclei can travel long distances in the Galaxy, and can be used to study cosmic-ray interactions and dark-matter annihilation.
Understanding the production mechanism of light (anti)nuclei is one of the key challenges of nuclear physics and has important consequences for astrophysics, since it provides an input for indirect dark-matter searches in space. In this paper, the latest results about the production of light (anti)nuclei in pp collisions at s√=13 TeV are presented, focusing on the comparison with the predictions of coalescence and thermal models. For the first time, the coalescence parameters B2 for deuterons and B3 for helions are compared with parameter-free theoretical predictions that are directly constrained by the femtoscopic measurement of the source radius in the same event class. A fair description of the data with a Gaussian wave function is observed for both deuteron and helion, supporting the coalescence mechanism for the production of light (anti)nuclei in pp collisions. This method paves the way for future investigations of the internal structure of more complex nuclear clusters, including the hypertriton.
W±-boson production in p–Pb collisions at √sNN = 8.16 TeV and Pb–Pb collisions at √sNN = 5.02 TeV
(2023)
The production of the W± bosons measured in p−Pb collisions at a centre-of-mass energy per nucleon−nucleon collision sNN−−−−√=8.16 TeV and Pb−Pb collisions at √sNN=5.02 TeV with ALICE at the LHC is presented. The W± bosons are measured via their muonic decay channel, with the muon reconstructed in the pseudorapidity region −4<ημlab<−2.5 with transverse momentum pμT>10 GeV/c. While in Pb−Pb collisions the measurements are performed in the forward (2.5<yμcms<4) rapidity region, in p−Pb collisions, where the centre-of-mass frame is boosted with respect to the laboratory frame, the measurements are performed in the backward (−4.46<yμcms<−2.96) and forward (2.03<yμcms<3.53) rapidity regions. The W− and W+ production cross sections, lepton-charge asymmetry, and nuclear modification factors are evaluated as a function of the muon rapidity. In order to study the production as a function of the p−Pb collision centrality, the production cross sections of the W− and W+ bosons are combined and normalised to the average number of binary nucleon−nucleon collision ⟨Ncoll⟩. In Pb−Pb collisions, the same measurements are presented as a function of the collision centrality. Study of the binary scaling of the W±-boson cross sections in p−Pb and Pb−Pb collisions is also reported. The results are compared with perturbative QCD (pQCD) calculations, with and without nuclear modifications of the Parton Distribution Functions (PDFs), as well as with available data at the LHC. Significant deviations from the theory expectations are found in the two collision systems, indicating that the measurements can provide additional constraints for the determination of nuclear PDF (nPDFs) and in particular of the light-quark distributions.
In our Galaxy, light antinuclei composed of antiprotons and antineutrons can be produced through high-energy cosmic-ray collisions with the interstellar medium or could also originate from the annihilation of dark-matter particles that have not yet been discovered. On Earth, the only way to produce and study antinuclei with high precision is to create them at high-energy particle accelerators. Although the properties of elementary antiparticles have been studied in detail, the knowledge of the interaction of light antinuclei with matter is limited. We determine the disappearance probability of 3He¯¯¯¯¯¯ when it encounters matter particles and annihilates or disintegrates within the ALICE detector at the Large Hadron Collider. We extract the inelastic interaction cross section, which is then used as input to calculations of the transparency of our Galaxy to the propagation of 3He¯¯¯¯¯¯ stemming from dark-matter annihilation and cosmic-ray interactions within the interstellar medium. For a specific dark-matter profile, we estimate a transparency of about 50%, whereas it varies with increasing 3He¯¯¯¯¯¯ momentum from 25% to 90% for cosmic-ray sources. The results indicate that 3He¯¯¯¯¯¯ nuclei can travel long distances in the Galaxy, and can be used to study cosmic-ray interactions and dark-matter annihilation.
Antimatter particles such as positrons and antiprotons abound in the cosmos. Much less common are light antinuclei, composed of antiprotons and antineutrons, which can be produced in our galaxy via high-energy cosmic-ray collisions with the interstellar medium or could also originate from the annihilation of the still undiscovered dark-matter particles. On Earth, the only way to produce and study antinuclei with high precision is to create them at high-energy particle accelerators like the Large Hadron Collider (LHC). Though the properties of elementary antiparticles have been studied in detail, knowledge of the interaction of light antinuclei with matter is rather limited. This work focuses on the determination of the disappearance probability of \ahe\ when it encounters matter particles and annihilates or disintegrates. The material of the ALICE detector at the LHC serves as a target to extract the inelastic cross section for \ahe\ in the momentum range of 1.17≤p<10 GeV/c. This inelastic cross section is measured for the first time and is used as an essential input to calculations of the transparency of our galaxy to the propagation of 3He¯¯¯¯¯¯ stemming from dark-matter decays and cosmic-ray interactions within the interstellar medium. A transparency of about 50% is estimated using the GALPROP program for a specific dark-matter profile and a standard set of propagation parameters. For cosmic-ray sources, the obtained transparency with the same propagation scheme varies with increasing 3He¯¯¯¯¯¯ momentum from 25% to 90%. The absolute uncertainties associated to the 3He¯¯¯¯¯¯ inelastic cross section measurements are of the order of 10%−15%. The reported results indicate that 3He¯¯¯¯¯¯ nuclei can travel long distances in the galaxy, and can be used to study cosmic-ray interactions and dark-matter decays.
The ALICE Collaboration reports the first fully-corrected measurements of the N-subjettiness observable for track-based jets in heavy-ion collisions. This study is performed using data recorded in pp and Pb−Pb collisions at centre-of-mass energies of √s=7 TeV and √sNN=2.76\,TeV, respectively. In particular the ratio of 2-subjettiness to 1-subjettiness, τ2/τ1, which is sensitive to the rate of two-pronged jet substructure, is presented. Energy loss of jets traversing the strongly interacting medium in heavy-ion collisions is expected to change the rate of two-pronged substructure relative to vacuum. The results are presented for jets with a resolution parameter of R=0.4 and charged jet transverse momentum of 40≤pT,jet≤60 GeV/c, which constitute a larger jet resolution and lower jet transverse momentum interval than previous measurements in heavy-ion collisions. This has been achieved by utilising a semi-inclusive hadron-jet coincidence technique to suppress the larger jet combinatorial background in this kinematic region. No significant modification of the τ2/τ1 observable for track-based jets in Pb--Pb collisions is observed relative to vacuum PYTHIA6 and PYTHIA8 references at the same collision energy. The measurements of τ2/τ1, together with the splitting aperture angle ΔR, are also performed in pp collisions at √s=7 TeV for inclusive jets. These results are compared with PYTHIA calculations at √s=7 TeV, in order to validate the model as a vacuum reference for the Pb−Pb centre-of-mass energy. The PYTHIA references for τ2/τ1 are shifted to larger values compared to the measurement in pp collisions. This hints at a reduction in the rate of two-pronged jets in Pb--Pb collisions compared to pp collisions.
The pT-differential production cross sections of prompt and non-prompt (produced in beauty-hadron decays) D mesons were measured by the ALICE experiment at midrapidity (|y|<0.5) in proton--proton collisions at s√=5.02 TeV. The data sample used in the analysis corresponds to an integrated luminosity of (19.3±0.4) nb−1. D mesons were reconstructed from their decays D0→K−π+, D+→K−π+π+, and D+s→ϕπ+→K−K+π+ and their charge conjugates. Compared to previous measurements in the same rapidity region, the cross sections of prompt D+ and D+s mesons have an extended pT coverage and total uncertainties reduced by a factor ranging from 1.05 to 1.6, depending on pT, allowing for a more precise determination of their pT-integrated cross sections. The results are well described by perturbative QCD calculations. The fragmentation fraction of heavy quarks to strange mesons divided by the one to non-strange mesons, fs/(fu+fd), is compatible for charm and beauty quarks and with previous measurements at different centre-of-mass energies and collision systems. The bb¯¯¯ production cross section per rapidity unit at midrapidity, estimated from non-prompt D-meson measurements, is dσbb¯¯¯/dy||y|<0.5=34.5±2.4(stat.)+4.7−2.9(tot.syst.) μb. It is compatible with previous measurements at the same centre-of-mass energy and with the cross section predicted by perturbative QCD calculations.
The pT-differential production cross sections of prompt and non-prompt (produced in beauty-hadron decays) D mesons were measured by the ALICE experiment at midrapidity (|y|<0.5) in proton--proton collisions at s√=5.02 TeV. The data sample used in the analysis corresponds to an integrated luminosity of (19.3±0.4) nb−1. D mesons were reconstructed from their decays D0→K−π+, D+→K−π+π+, and D+s→ϕπ+→K−K+π+ and their charge conjugates. Compared to previous measurements in the same rapidity region, the cross sections of prompt D+ and D+s mesons have an extended pT coverage and total uncertainties reduced by a factor ranging from 1.05 to 1.6, depending on pT, allowing for a more precise determination of their pT-integrated cross sections. The results are well described by perturbative QCD calculations. The fragmentation fraction of heavy quarks to strange mesons divided by the one to non-strange mesons, fs/(fu+fd), is compatible for charm and beauty quarks and with previous measurements at different centre-of-mass energies and collision systems. The bb¯¯¯ production cross section per rapidity unit at midrapidity, estimated from non-prompt D-meson measurements, is dσbb¯¯¯/dy||y|<0.5=34.5±2.4(stat.)+4.7−2.9(tot.syst.) μb. It is compatible with previous measurements at the same centre-of-mass energy and with the cross section predicted by perturbative QCD calculations.
W±-boson production in p–Pb collisions at √sNN = 8.16 TeV and Pb–Pb collisions at √sNN = 5.02 TeV
(2023)
The production of the W± bosons measured in p–Pb collisions at a centreof-mass energy per nucleon–nucleon collision √sNN = 8.16 TeV and Pb–Pb collisions at √sNN = 5.02 TeV with ALICE at the LHC is presented. The W± bosons are measured via their muonic decay channel, with the muon reconstructed in the pseudorapidity region −4 < ηµ lab < −2.5 with transverse momentum p µ T > 10 GeV/c. While in Pb–Pb collisions the measurements are performed in the forward (2.5 < yµ cms < 4) rapidity region, in p–Pb collisions, where the centre-of-mass frame is boosted with respect to the laboratory frame, the measurements are performed in the backward (−4.46 < yµ cms < −2.96) and forward (2.03 < yµ cms < 3.53) rapidity regions. The W− and W+ production cross sections, leptoncharge asymmetry, and nuclear modification factors are evaluated as a function of the muon rapidity. In order to study the production as a function of the p–Pb collision centrality, the production cross sections of the W− and W+ bosons are combined and normalised to the average number of binary nucleon–nucleon collision hNcolli. In Pb–Pb collisions, the same measurements are presented as a function of the collision centrality. Study of the binary scaling of the W±-boson cross sections in p–Pb and Pb–Pb collisions is also reported. The results are compared with perturbative QCD calculations, with and without nuclear modifications of the Parton Distribution Functions (PDFs), as well as with available data at the LHC. Significant deviations from the theory expectations are found in the two collision systems, indicating that the measurements can provide additional constraints for the determination of nuclear PDFs and in particular of the light-quark distributions.
Production of inclusive charmonia in pp collisions at center-of-mass energy of √s = 13 TeV and p–Pb collisions at center-of-mass energy per nucleon pair of √sNN = 8.16 TeV is studied as a function of charged-particle pseudorapidity density with ALICE. Ground and excited charmonium states (J/ψ, ψ(2S)) are measured from their dimuon decays in the interval of rapidity in the center-of-mass frame 2.5 < ycms < 4.0 for pp collisions, and 2.03 < ycms < 3.53 and −4.46 < ycms < −2.96 for p–Pb collisions. The charged-particle pseudorapidity density is measured around midrapidity (|η| < 1.0). In pp collisions, the measured charged-particle multiplicity extends to about six times the average value, while in p-Pb collisions at forward (backward) rapidity a multiplicity corresponding to about three (four) times the average is reached. The ψ(2S) yield increases with the charged-particle pseudorapidity density. The ratio of ψ(2S) over J/ψ yield does not show a significant multiplicity dependence in either colliding system, suggesting a similar behavior of J/ψ and ψ(2S) yields with respect to charged-particle pseudorapidity density. Results for the ψ(2S) yield and its ratio with respect to J/ψ agree with available model calculations.
In particle collider experiments, elementary particle interactions with large momentum transfer produce quarks and gluons (known as partons) whose evolution is governed by the strong force, as described by the theory of quantum chromodynamics (QCD). These partons subsequently emit further partons in a process that can be described as a parton shower which culminates in the formation of detectable hadrons. Studying the pattern of the parton shower is one of the key experimental tools for testing QCD. This pattern is expected to depend on the mass of the initiating parton, through a phenomenon known as the dead-cone effect, which predicts a suppression of the gluon spectrum emitted by a heavy quark of mass mQ and energy E, within a cone of angular size mQ/E around the emitter. Previously, a direct observation of the dead-cone effect in QCD had not been possible, owing to the challenge of reconstructing the cascading quarks and gluons from the experimentally accessible hadrons. We report the direct observation of the QCD dead cone by using new iterative declustering techniques to reconstruct the parton shower of charm quarks. This result confirms a fundamental feature of QCD. Furthermore, the measurement of a dead-cone angle constitutes a direct experimental observation of the non-zero mass of the charm quark, which is a fundamental constant in the standard model of particle physics.
At particle collider experiments, elementary particle interactions with large momentum transfer produce quarks and gluons (known as partons) whose evolution is governed by the strong force, as described by the theory of quantum chromodynamics (QCD). The vacuum is not transparent to the partons and induces gluon radiation and quark pair production in a process that can be described as a parton shower. Studying the pattern of the parton shower is one of the key experimental tools in understanding the properties of QCD. This pattern is expected to depend on the mass of the initiating parton, through a phenomenon known as the dead-cone effect, which predicts a suppression of the gluon spectrum emitted by a heavy quark of mass m and energy E, within a cone of angular size m/E around the emitter. A direct observation of the dead-cone effect in QCD has not been possible until now, due to the challenge of reconstructing the cascading quarks and gluons from the experimentally accessible bound hadronic states. We report the first direct observation of the QCD dead-cone by using new iterative declustering techniques to reconstruct the parton shower of charm quarks. This result confirms a fundamental feature of QCD, which is derived more generally from its origin as a gauge quantum field theory. Furthermore, the measurement of a dead-cone angle constitutes a direct experimental observation of the non-zero mass of the charm quark, which is a fundamental constant in the standard model of particle physics.
Results on the production of 4He and Image 1 nuclei in Pb–Pb collisions at √sNN=2.76TeV in the rapidity range |y|<1, using the ALICE detector, are presented in this paper. The rapidity densities corresponding to 0–10% central events are found to be dN/dyHe4=(0.8±0.4(stat)±0.3(syst))×10−6 and Image 2, respectively. This is in agreement with the statistical thermal model expectation assuming the same chemical freeze-out temperature (Tchem=156MeV) as for light hadrons. The measured ratio of Image 3 is 1.4±0.8(stat)±0.5(syst).
Transverse momentum (pT ) spectra of charged particles at mid-pseudorapidity in Xe–Xe collisions at √sNN=5.44TeV measured with the ALICE apparatus at the Large Hadron Collider are reported. The kinematic range 0.15<pT<50GeV/c and |η|<0.8 is covered. Results are presented in nine classes of collision centrality in the 0–80% range. For comparison, a pp reference at the collision energy of √s=5.44 TeV is obtained by interpolating between existing pp measurements at √s=5.02 and 7 TeV. The nuclear modification factors in central Xe–Xe collisions and Pb–Pb collisions at a similar center-of-mass energy of √sNN=5.02 TeV, and in addition at 2.76 TeV, at analogous ranges of charged particle multiplicity density 〈dNch/dη〉 show a remarkable similarity at pT>10 GeV/c. The centrality dependence of the ratio of the average transverse momentum 〈pT〉 in Xe–Xe collisions over Pb–Pb collision at √s=5.02 TeV is compared to hydrodynamical model calculations.
The production of prompt Λc+ baryons at midrapidity (|y|<0.5) was measured in central (0–10%) and mid-central (30–50%) Pb–Pb collisions at the center-of-mass energy per nucleon–nucleon pair √sNN=5.02 TeV with the ALICE detector. The results are more precise, more differential in centrality, and reach much lower transverse momentum (pT=1 GeV/c) with respect to previous measurements performed by the ALICE, STAR, and CMS Collaborations in nucleus–nucleus collisions, allowing for an extrapolation down to pT=0. The pT-differential Λc+/D0 ratio is enhanced with respect to the pp measurement for 4<pT<8 GeV/c by 3.7 standard deviations (σ), while the pT-integrated ratios are compatible within 1σ. The observed trend is similar to that observed in the strange sector for the Λ/KS0 ratio. Model calculations including coalescence or statistical hadronization for charm-hadron formation are compared with the data.
In quantum scattering processes between two particles, aspects characterizing the strong and Coulomb forces can be observed in kinematic distributions of the particle pairs. The sensitivity to the interaction potential reaches a maximum at low relative momentum and vanishing distance between the two particles. Ultrarelativistic heavy-ion collisions at the LHC provide an abundant source of many hadron species and can be employed as a measurement method of scattering parameters that is complementary to scattering experiments. This study confirms that momentum correlations of particles produced in Pb–Pb collisions at the LHC provide an accurate measurement of kaon–proton scattering parameters at low relative momentum, allowing precise access to the K−p→K−p process. This work also validates the femtoscopic measurement in ultrarelativistic heavy-ion collisions as an alternative to scattering experiments and a complementary tool to the study of exotic atoms with comparable precision. In this work, the first femtoscopic measurement of momentum correlations of K−p(K+p‾) and K+p(K−p‾) pairs in Pb–Pb collisions at centre-of-mass energy per nucleon pair of sNN=5.02 TeV registered by the ALICE experiment is reported. The components of the K−p complex scattering length are extracted and found to be ℜf0=−0.91±0.03(stat)−0.03+0.17(syst) and ℑf0=0.92±0.05(stat)−0.33+0.12(syst). The results are compared with chiral effective field theory predictions as well as with existing data from dedicated scattering and exotic kaonic atom experiments.
The measurement of the production of f0(980) in inelastic pp collisions at √s=5.02 TeV is presented. This is the first reported measurement of inclusive f0(980) yield at LHC energies. The production is measured at midrapidity, |y|<0.5, in a wide transverse momentum range, 0<pT<16 GeV/c, by reconstructing the resonance in the f0(980) →π+π− hadronic decay channel using the ALICE detector. The pT-differential yields are compared to those of pions, protons and ϕ mesons as well as to predictions from the HERWIG 7.2 QCD-inspired Monte Carlo event generator and calculations from a coalescence model that uses the AMPT model as an input. The ratio of the pT-integrated yield of f0(980) relative to pions is compared to measurements in e+e− and pp collisions at lower energies and predictions from statistical hadronisation models and HERWIG 7.2. A mild collision energy dependence of the f0(980) to pion production is observed in pp collisions from SPS to LHC energies. All considered models underpredict the pT-integrated 2f0(980)/(π+ +π−) ratio. The prediction from the canonical statistical hadronisation model assuming a zero total strangeness content of f0(980) is consistent with the data within 1.9σ and is the closest to the data. The results provide an essential reference for future measurements of the particle yield and nuclear modification in p–Pb and Pb–Pb collisions, which have been proposed to be instrumental to probe the elusive nature and quark composition of the f0(980) scalar meson.
In ultrarelativistic heavy-ion collisions, the event-by-event variation of the elliptic flow v2 reflects fluctuations in the shape of the initial state of the system. This allows to select events with the same centrality but different initial geometry. This selection technique, Event Shape Engineering, has been used in the analysis of charge-dependent two- and three-particle correlations in Pb–Pb collisions at √sNN=2.76 TeV. The two-particle correlator 〈cos(φα−φβ)〉, calculated for different combinations of charges α and β, is almost independent of v2 (for a given centrality), while the three-particle correlator 〈cos(φα+φβ−2Ψ2)〉 scales almost linearly both with the event v2 and charged-particle pseudorapidity density. The charge dependence of the three-particle correlator is often interpreted as evidence for the Chiral Magnetic Effect (CME), a parity violating effect of the strong interaction. However, its measured dependence on v2 points to a large non-CME contribution to the correlator. Comparing the results with Monte Carlo calculations including a magnetic field due to the spectators, the upper limit of the CME signal contribution to the three-particle correlator in the 10–50% centrality interval is found to be 26–33% at 95% confidence level.
The ALICE Collaboration reports the measurement of semi-inclusive distributions of charged-particle jets recoiling from a high-transverse momentum trigger hadron in p–Pb collisions at √sNN=5.02 TeV. Jets are reconstructed from charged-particle tracks using the anti-kT algorithm with resolution parameter R=0.2 and 0.4. A data-driven statistical approach is used to correct the uncorrelated background jet yield. Recoil jet distributions are reported for jet transverse momentum 15<pT,jetch<50GeV/c and are compared in various intervals of p–Pb event activity, based on charged-particle multiplicity and zero-degree neutral energy in the forward (Pb-going) direction. The semi-inclusive observable is self-normalized and such comparisons do not require the interpretation of p–Pb event activity in terms of collision geometry, in contrast to inclusive jet observables. These measurements provide new constraints on the magnitude of jet quenching in small systems at the LHC. In p–Pb collisions with high event activity, the average medium-induced out-of-cone energy transport for jets with R=0.4 and 15<pT,jetch<50GeV/c is measured to be less than 0.4 GeV/c at 90% confidence, which is over an order of magnitude smaller than a similar measurement for central Pb–Pb collisions at √sNN=2.76TeV. Comparison is made to theoretical calculations of jet quenching in small systems, and to inclusive jet measurements in p–Pb collisions selected by event activity at the LHC and in d–Au collisions at RHIC.
The production of muons from heavy-flavour hadron decays in p–Pb collisions at t √sNN=5.02 TeV was studied for 2<pT<16 GeV/c with the ALICE detector at the CERN LHC. The measurement was performed at forward (p-going direction) and backward (Pb-going direction) rapidity, in the ranges of rapidity in the centre-of-mass system (cms) 2.03<ycms<3.53 and −4.46<ycms<−2.96, respectively. The production cross sections and nuclear modification factors are presented as a function of transverse momentum (pT). At forward rapidity, the nuclear modification factor is compatible with unity while at backward rapidity, in the interval 2.5<pT<3.5 GeV/c, it is above unity by more than 2σ. The ratio of the forward-to-backward production cross sections is also measured in the overlapping interval 2.96<|ycms|<3.53 and is smaller than unity by 3.7σ in 2.5<pT<3.5 GeV/c. The data are described by model calculations including cold nuclear matter effects.
The production of prompt D0, Ds+, and Λc+ hadrons, and their ratios, Ds+/D0 and Λc+/D0, are measured in proton–proton collisions at √s=13 TeV at midrapidity (|y|<0.5) with the ALICE detector at the LHC. The measurements are performed as a function of the charm-hadron transverse momentum (pT) in intervals of charged-particle multiplicity, measured with two multiplicity estimators covering different pseudorapidity regions. While the strange to non-strange Ds+/D0 ratio indicates no significant multiplicity dependence, the baryon-to-meson pT-differential Λc+/D0 ratio shows a multiplicity-dependent enhancement, with a significance of 5.3σ for 1<pT<12 GeV/c, comparing the highest multiplicity interval with respect to the lowest one. The measurements are compared with a theoretical model that explains the multiplicity dependence by a canonical treatment of quantum charges in the statistical hadronisation approach, and with predictions from event generators that implement colour reconnection mechanisms beyond the leading colour approximation to model the hadronisation process. The Λc+/D0 ratios as a function of pT present a similar shape and magnitude as the Λ/KS0 ratios in comparable multiplicity intervals, suggesting a potential common mechanism for light- and charm-hadron formation, with analogous multiplicity dependence. The pT-integrated ratios, extrapolated down to pT=0, do not show a significant dependence on multiplicity within the uncertainties.
Fluctuation measurements are important sources of information on the mechanism of particle production at LHC energies. This article reports the first experimental results on third-order cumulants of the net-proton distributions in Pb–Pb collisions at a center-of-mass energy √sNN=5.02 TeV recorded by the ALICE detector. The results on the second-order cumulants of net-proton distributions at √sNN=2.76 and 5.02 TeV are also discussed in view of effects due to the global and local baryon number conservation. The results demonstrate the presence of long-range rapidity correlations between protons and antiprotons. Such correlations originate from the early phase of the collision. The experimental results are compared with HIJING and EPOS model calculations, and the dependence of the fluctuation measurements on the phase-space coverage is examined in the context of lattice quantum chromodynamics (LQCD) and hadron resonance gas (HRG) model estimations. The measured third-order cumulants are consistent with zero within experimental uncertainties of about 4% and are described well by LQCD and HRG predictions.
We present the first systematic comparison of the charged-particle pseudorapidity densities for three widely different collision systems, pp, pPb, and PbPb, at the top energy of the Large Hadron Collider (√sNN=5.02TeV) measured over a wide pseudorapidity range (−3.5<η<5), the widest possible among the four experiments at that facility. The systematic uncertainties are minimised since the measurements are recorded by the same experimental apparatus (ALICE). The distributions for pPb and PbPb collisions are determined as a function of the centrality of the collisions, while results from pp collisions are reported for inelastic events with at least one charged particle at midrapidity. The charged-particle pseudorapidity densities are, under simple and robust assumptions, transformed to charged-particle rapidity densities. This allows for the calculation and the presentation of the evolution of the width of the rapidity distributions and of a lower bound on the Bjorken energy density, as a function of the number of participants in all three collision systems. We find a decreasing width of the particle production, and roughly a smooth ten fold increase in the energy density, as the system size grows, which is consistent with a gradually higher dense phase of matter.
Correlations between moments of different flow coefficients are measured in Pb–Pb collisions at √sNN=5.02TeV recorded with the ALICE detector. These new measurements are based on multiparticle mixed harmonic cumulants calculated using charged particles in the pseudorapidity region |η| <0.8with the transverse momentum range 0.2 <pT<5.0GeV/c. The centrality dependence of correlations between two flow coefficients as well as the correlations between three flow coefficients, both in terms of their second moments, are shown. In addition, a collection of mixed harmonic cumulants involving higher moments of v2and v3is measured for the first time, where the characteristic signature of negative, positive and negative signs of four-, six-and eight-particle cumulants are observed, respectively. The measurements are compared to the hydrodynamic calculations using iEBE-VISHNU with AMPT and TRENTo initial conditions. It is shown that the measurements carried out using the LHC Run 2 data in 2015 have the precision to explore the details of initial-state fluctuations and probe the nonlinear hydrodynamic response of v2and v3to their corresponding initial anisotropy coefficients ε2and ε3. These new studies on correlations between three flow coefficients as well as correlations between higher moments of two different flow coefficients will pave the way to tighten constraints on initial-state models and help to extract precise information on the dynamic evolution of the hot and dense matter created in heavy-ion collisions at the LHC.
Measurements of (anti)proton, (anti)deuteron, and (anti)3He production in the rapidity range −1<y<0 as a function of the transverse momentum and event multiplicity in p-Pb collisions at a center-of-mass energy per nucleon-nucleon pair sNN−−−√=8.16 TeV are presented. The coalescence parameters B2 and B3, measured as a function of the transverse momentum per nucleon and of the mean charged-particle multiplicity density, confirm a smooth evolution from low to high multiplicity across different collision systems and energies. The ratios between (anti)deuteron and (anti)3He yields and those of (anti)protons are also reported as a function of the mean charged-particle multiplicity density. A comparison with the predictions of the statistical hadronization and coalescence models for different collision systems and center-of-mass energies favors the coalescence description for the deuteron-to-proton yield ratio with respect to the canonical statistical model.
This article presents the first measurement of the interaction between charm hadrons and nucleons. The two-particle momentum correlations of pD− and ¯pD+ pairs are measured by the ALICE Collaboration in high-multiplicity pp collisions at √s=13 TeV. The data are compatible with the Coulomb-only interaction hypothesis within (1.1–1.5)σ. The level of agreement slightly improves if an attractive nucleon (N)¯D strong interaction is considered, in contrast to most model predictions which suggest an overall repulsive interaction. This measurement allows for the first time an estimation of the 68% confidence level interval for the isospin I=0 inverse scattering length of the N¯D state f−10, I=0∈[−0.4,0.9] fm−1, assuming negligible interaction for the isospin I=1 channel.
The production of prompt Λ+c baryons at midrapidity (|y|<0.5) was measured in central (0-10%) and mid-central (30-50%) Pb-Pb collisions at the center-of-mass energy per nucleon-nucleon pair sNN−−−√=5.02 TeV with the ALICE detector. The Λ+c production yield, the Λ+c/D0 production ratio, and the Λ+c nuclear modification factor RAA are reported. The results are more precise and more differential in transverse momentum (pT) and centrality with respect to previous measurements. The Λ+c/D0 ratio, which is enhanced with respect to the pp measurement for 4<pT<8 GeV/c, is described by theoretical calculations that model the charm-quark transport in the quark-gluon plasma and include hadronization via both coalescence and fragmentation mechanisms.
Introduction: The German PID-NET registry was founded in 2009, serving as the first national registry of patients with primary immunodeficiencies (PID) in Germany. It is part of the European Society for Immunodeficiencies (ESID) registry. The primary purpose of the registry is to gather data on the epidemiology, diagnostic delay, diagnosis, and treatment of PIDs.
Methods: Clinical and laboratory data was collected from 2,453 patients from 36 German PID centres in an online registry. Data was analysed with the software Stata® and Excel.
Results: The minimum prevalence of PID in Germany is 2.72 per 100,000 inhabitants. Among patients aged 1–25, there was a clear predominance of males. The median age of living patients ranged between 7 and 40 years, depending on the respective PID. Predominantly antibody disorders were the most prevalent group with 57% of all 2,453 PID patients (including 728 CVID patients). A gene defect was identified in 36% of patients. Familial cases were observed in 21% of patients. The age of onset for presenting symptoms ranged from birth to late adulthood (range 0–88 years). Presenting symptoms comprised infections (74%) and immune dysregulation (22%). Ninety-three patients were diagnosed without prior clinical symptoms. Regarding the general and clinical diagnostic delay, no PID had undergone a slight decrease within the last decade. However, both, SCID and hyper IgE- syndrome showed a substantial improvement in shortening the time between onset of symptoms and genetic diagnosis. Regarding treatment, 49% of all patients received immunoglobulin G (IgG) substitution (70%—subcutaneous; 29%—intravenous; 1%—unknown). Three-hundred patients underwent at least one hematopoietic stem cell transplantation (HSCT). Five patients had gene therapy.
Conclusion: The German PID-NET registry is a precious tool for physicians, researchers, the pharmaceutical industry, politicians, and ultimately the patients, for whom the outcomes will eventually lead to a more timely diagnosis and better treatment.
To fulfil the requirements of ESS on beam transmission and emittance growth a detailed knowledge of the physics of beam formation as well as the interaction of the H- with the residual gas is substantial. Space charge compensated beam transport using solenoids for ion optics is in favour for the Low Energy Beam Transport (LEBT) between ion source and the first RFQ. Space charge compensation reduces the electrical self fields and beam radii and therefore emittance growth due to aberrations and redistribution. Transport of H- near the ion source is negatively influenced by the dipole fields required for beam extraction and e--dumping and the high gas pressure. The destruction of the rotational symmetry together with the space charge forces causes emittance growth and particle losses within the extraction system. High residual gas pressure near the extractor together with the high cross section for stripping will influence the transmission as well as space charge compensation. Therefore a detailed knowledge of the interaction of the residual gas with the beam and the influence of the external fields on the distribution of the compensation particles is necessary to reduce particle losses and emittance growth. Preliminary experiments using positive hydrogen ions for reference already show the influence of dipole fields on beam emittance. First measurements with H- confirm these results. Additional information on the interactions of the residual gas with the beam ions have been gained from the measurements using the momentum and energy analyser.
Investigation of the focus shift due to compensation process for low energy ion beam transport
(2000)
In magnetic Low Energy Beam Transport (LEBT) sections space charge compensation helps to enhance the transportable beam current and to reduce emittance growth due to space charge forces. For pulsed beams the time neccesary to establish space charge compensation is of great interest for beam transport. Particularly with regard to beam injection into the first accelerator section (e.g. RFQ) investigation of effects on shift of the beam focus due to space charge compensation are very important. The achieved results helps to obviate a mismatch into the first RFQ. To investigate the space charge compensation due to residual gas ionization, time resolved measurements using pulsed ion beams were performed at the LEBT system at the IAP and at the CEA-Saclay injektion line. A residual gas ion energy analyser (RGIA) equiped with a channeltron was used to measure the potential destribution as a function of time to estimate the rise time of compensation. For time resolved measurements (delta t min=50ns) of the radial density profile of the ion beam a CCD-camera was applied. The measured data were used in a numerical simulation of selfconsistant eqilibrium states of the beam plasma [1] to determine plasma parameters such as the density, the temperature, the kinetic and potential energy of the compensation electrons as a function of time. Measurements were done using focused proton beams (10keV, 2mA at IAP and 92keV, 62mA at CEA-Saclay) to get a better understanding of the influence of the compensation process. An interpretation of the acquired data and the achieved results will be presented.
High perveance negative ion beams with low emittance are essential for several next generation particle accelerators (i. g. spallation sources like ESS [1] and SNS [2]). The extraction and transport of these beams have intrinsic difficulties different from positive ion beams. Limitation of beam current and emittance growth have to be avoided. To fulfill the requirements of those projects a detailed knowledge of the physics of beam formation the interaction of the H- with the residual gas and transport is substantial. A compact cesium free H- volume source delivering a low energy high perveance beam (6.5 keV, 2.3 mA, perveance K= 0.0034) has been built to study the fundamental physics of beam transport and will be integrated into the existing LEBT section in the near future. First measurements of the interaction between the ion beam and the residual gas will be presented together with the experimental set up and preliminary results.
High perveance negative ion beams with low emittance are essential for several next generation particle accelerators (i. g. spallation sources like ESS [1] and SNS [2]). The extraction and transport of these beams have intrinsic difficulties different from positive ion beams. Limitation of beam current and emittance growth have to be avoided. To fulfill the requirements of those projects a detailed knowledge of the physics of beam formation the interaction of the H- with the residual gas and transport is substantial. A compact cesium free H- volume source delivering a low energy high perveance beam (6.5 keV, 2.3 mA, perveance K= 0.0034) has been built to study the fundamental physics of beam transport and will be integrated into the existing LEBT section in the near future. First measurements of the interaction between the ion beam and the residual gas will be presented together with the experimental set up and preliminary results.
The knowledge of the build up time of space charge compensation (SCC) and the investigation of the compensation process is of main interest for low energy beam transport of pulsed high perveance ion beams under space charge compensated conditions. To investigate experimentally the rise of compensation an LEBT system consisting of a pulsed ion source, two solenoids and a drift tube as diagnostic section has been set up. The beam potential has been measured time resolved by a residual gas ion energy analyser (RGA). A numerical simulation for the calculation of self-consistent equilibrium states of the beam plasma has been developed to determine plasma parameters which are difficult measure directly. The results of the simulation has been compared with the measured data to investigate the behavior of the compensation electrons as a function of time. The acquired data shows that the theoretical rise time of space charge compensation is by a factor of two shorter than the build up time determined experimentally. In view of description the process of SCC an interpretation of the gained results is given.
The determination of the beam emittance using conventional destructive methods suffers from two main disadvantages. The interaction between the ion beam and the measurement device produces a high amount of secondary particles. Those particles interact with the beam and can change the transport properties of the accelerator. Particularly in the low energy section of high current accelerators like proposed for IFMIF, heavy ion inertial fusion devices (HIDIF) and spallation sources (ESS, SNS) the power deposited on the emittance measurement device can lead to extensive heat on the detector itself and can destruct or at least dejust the device (slit or grit for example). CCD camera measurements of the incident light emitted from interaction of beam ions with residual gas are commonly used for determination of the beam emittance. Fast data acquisition and high time resolution are additional features of such a method. Therefore a matrix formalism is used to derive the emittance from the measured profile of the beam [1,2] which does not take space charge effects and emittance growth into account. A new method to derive the phase space distribution of the beam from a single CCD camera image using statistical numerical methods will be presented together with measurements. The results will be compared with measurements gained from a conventional Allison type (slit-slit) emittance measurement device.
For investigation of space charge compensation process due to residual gas ionization and the experimentally study of the rise of compensation, a Low Energy Beam Transport (LEBT) system consisting of an ion source, two solenoids, a decompensation electrode to generate a pulsed decompensated ion beam and a diagnostic section was set up. The potentials at the beam axis and the beam edge were ascertained from time resolved measurements by a residual gas ion energy analyzer. A numerical simulation of self-consistent equilibrium states of the beam plasma has been developed to determine plasma parameters which are difficult to measure directly. The temporal development of the kinetic and potential energy of the compensation electrons has been analyzed by using the numerically gained results of the simulation. To investigate the compensation process the distribution and the losses of the compensation electrons were studied as a function of time. The acquired data show that the theoretical estimated rise time of space charge compensation neglecting electron losses is shorter than the build up time determined experimentally. To describe the process of space charge compensation an interpretation of the achieved results is given.
A LEBT system consisting of an ion source, two solenoids, and a diagnostic section has been set up to investigate the space charge compensation process due to residual gas ionization [1] and to study experimentally the rise of compensation. To gain the radial beam potential distribution time resolved measurements of the residual gas ion energy distribution were carried out using a Hughes Rojanski analyzer [2,3]. To measure the radial density profile of the ion beam a CCD-camera performed time resolved measurements, which allow an estimation the rise time of compensation. Further the dynamic effect of the space charge compensation on the beam transport was shown. A numerical simulation under assumption of selfconsistent states [4] of the beam plasma has been used to determine plasma parameters such as the radial density profile and the temperature of the electrons. The acquired data show that the theoretical estimated rise time of space charge compensation neglecting electron losses is shorter than the build up time determined experimentally. An interpretation of the achieved results is given.
Influence of space charge fluctuations on the low energy beam transport of high current ion beams
(2000)
For future high current ion accelerators like SNS, ESS or IFMIF the beam behaviour in low energy beam transport sections is dominated by space charge forces. Therefore space charge fluctuations (e. g. source noise) can drastically influence the beam transport properties of the low energy beam transport section. Losses of beam ions and emittance growth are the most severe problems. For electrostatic transport systems either a LEBT design has to be found which is insensitive to variations of the space charge or the origin of the fluctuations has to be eliminated. For space charge compensated transport as proposed for ESS and IFMIF the situation is different: No major influence on beam transport is expected for fluctuations below a cut-off frequency given by the production rate of the compensation particles. Above this frequency the fluctuations can not be compensated by particle production alone, but redistributions of the compensation particles helps to compensate the influence of the fluctuations. Above a second cut-off frequency given by the density and the temperature of the compensation particles their redistribution is too slow to reduce the influence of the space charge fluctuations. Transport simulations for the IFMIF injector including space charge fluctuations will be presented together with a determination of the cut-off frequencies. The results will be compared with measurements of the rise time of space charge compensation.
Accelerator Driven Systems (ADS) are promising tools for the efficient transmutation of nuclear waste products in dedicated industrial installations, called transmuters. The Myrrha project at Mol, Belgium, placed itself on the path towards these applications with a multipurpose and versatile system based on a liquid PbBi (LBE) cooled fast reactor (80 MWth) which may be operated in both critical and subcritical modes. In the latter case the core is fed by spallation neutrons obtained from a 600 MeV proton beam hitting the LBE coolant/target. The accelerator providing this beam is a high intensity CW superconducting linac which is laid out for the highest achievable reliability. The combination of a parallel redundant and of a fault tolerant scheme should allow obtaining an MTBF value in excess of 250 hours that is required for optimal integrity and successful operation of the ADS. Myrrha is expected to be operational in 2023. The forthcoming 4-year period is fully dedicated to R&D activities, and in the field of the accelerator they are strongly focused on the reliability aspects and on the proper shaping of the beam trip spectrum.
The crossbar-H-mode (CH) structure is the first superconducting multicell drift tube cavity for the low and medium energy range operated in the H21 mode. Because of the large energy gain per cavity, which leads to high real estate gradients, it is an excellent candidate for the efficient acceleration in high power proton and ion accelerators with fixed velocity profile. A prototype cavity has been developed and tested successfully with a gradient of 7MV/m. A few new superconducting CH cavities with improved geometries for different high power applications are under development at present. One cavity (f=325 MHz, β=0.16, seven cells) is currently under construction and studied with respect to a possible upgrade option for the GSI UNILAC. Another cavity (f=217 MHz, β=0.059, 15 cells) is designed for a cw operated energy variable heavy ion linac application. Furthermore, the EUROTRANS project (European research program for the transmutation of high level nuclear waste in an accelerator driven system, 600 MeV protons, 352 MHz) is one of many possible applications for this kind of superconducting rf cavity. In this context a layout of the 17 MeV EUROTRANS injector containing four superconducting CH cavities was proposed by the Institute for Applied Physics (IAP) Frankfurt. The status of the cavity development related to the EUROTRANS injector is presented.
As the successor of the EUROTRANS project, the MAX project is aiming to continue the R&D effects for a European Accelerator-Driven System and to bring the conceptual design to reality. The layout of the driver linac for MAX will follow the reference design made for the XT-ADS phase of the EUROTRANS project. For the injector part, new design strategies and approaches, e.g. half resonant frequency, half transition-energy between the RFQ and the CH-DTL, and using the 4-rod RFQ structure instead of the originally proposed 4-vane RFQ, have been conceived and studied to reach a more reliable CW operation at reduced costs. In this paper, the design and simulation results of the MAX injector are presented.
The MYRRHA Project (Multi Purpose Hybrid Reactor for High Tech Applications) at Mol/belgium will be a user facility with emphasis on research with neutron generated by a spallation source. One main aspect is the demonstration of nuclear waste technology using an accelerator driven system. A superconducting linac delivers a 4 mA, 600 MeV proton beam. The first accelerating section is covered by the 17 MeV injector. It consists of a proton source, an RFQ, two room temperature CH cavities and 4 superconducting CH-cavities. The initial design has used an RF frequency of 352 MHz. Recently the frequency of the injector has been set to 176 MHz. The main reason is the possible use of a 4-rod-RFQ with reduced power dissipation and energy, respectively. The status of the overall injector layout including cavity design is presented.
EUROTRANS is a European research program for the transmutation of high level nuclear waste in an accelerator-driven system (ADS). As proposed, the driver linac needs to deliver a 2.5–4 mA, 600 MeV continuous-wave (CW) proton beam and later a 20 mA, 800 MeV one to the spallation target in the prototype-scale and industrial-scale demonstration phases, respectively. This paper is focusing on the conceptual studies performed with respect to the 17 MeV injector. First, the special beam dynamics strategies and methods, which have been developed and applied to design a current-variable injector up to 30 mA for allowing an easy upgrade without additional R&D costs, will be introduced. Then the error study made for evaluating the tolerance limits of the designed injector will be presented as well.
MYRRHA is conceived as an accelerator driven system (ADS) for transmutation of high level nuclear waste. The neutron source is created by coupling a proton accelerator of 600 MeV with a 4 mA proton beam, a spallation source and a sub-critical core. The IAP of Frankfurt University is responsible for the development of the 17 MeV injector operated at 176 MHz. The injector consists of a 1.5 MeV 4-Rod-RFQ and six CH-drifttube-structures. The first two CH-structures will be operated at room temperature and the other CH-structures are superconducting cavities assembled in one cryo-module. To achieve the extremely high reliability required by the ADS application, the design of the 17 MeV injector has been intensively studied, with respect to thermal issues, minimum peak fields and field distribution.
Metasomatic reaction zones between mafic and ultramafic rocks exhumed from subduction zones provide a window into mass-transfer processes at high pressure. However, accurate interpretation of the rock record requires distinguishing high-pressure metasomatic processes from inherited oceanic signatures prior to subduction. We integrated constraints from bulk-rock geochemical compositions and petrophysical properties, mineral chemistry, and thermodynamic modeling to understand the formation of reaction zones between juxtaposed metagabbro and serpentinite as exemplified by the Voltri Massif (Ligurian Alps, Italy). Distinct zones of variably metasomatized metagabbro are dominated by chlorite, amphibole, clinopyroxene, epidote, rutile, ilmenite, and titanite between serpentinite and eclogitic metagabbro. Whereas the precursor serpentinite and oxide gabbro formed and were likely already in contact in an oceanic setting, the reaction zones formed by diffusional Mg-metasomatism between the two rocks from prograde to peak, to retrograde conditions in a subduction zone. Metasomatism of mafic rocks by Mg-rich fluids that previously equilibrated with serpentinite could be widespread along the subduction interface, within the subducted slab, and the mantle wedge. Furthermore, the models predict that talc formation by Si-metasomatism of serpentinite in subduction zones is limited by pressure-dependent increase in the silica activity buffered by the serpentine-talc equilibrium. Elevated activities of aqueous Ca and Al species would also favor the formation of chlorite and garnet. Accordingly, unusual conditions or processes would be required to stabilize abundant talc at high P-T conditions. Alternatively, a different set of mineral assemblages, such as serpentine- or chlorite-rich rocks, may be controlling the coupling-decoupling transition of the plate interface.
Talc formation via silica-metasomatism of ultramafic rocks is believed to play key roles in subduction zone processes. Yet, the conditions of talc formation remain poorly constrained. We used thermodynamic reaction-path models to assess the formation of talc at the slab-mantle interface and show that it is restricted to a limited set of pressure–temperature conditions, protolith, and fluid compositions. In contrast, our models predict that chlorite formation is ubiquitous at conditions relevant to the slab-mantle interface of subduction zones. The scarcity of talc and abundance of chlorite is evident in the rock record of exhumed subduction zone terranes. Talc formation during Si-metasomatism may thus play a more limited role in volatile cycling, strain localization, and in controlling the decoupling-coupling transition of the plate interface. Conversely, the observed and predicted ubiquity of chlorite corroborates its prominent role in slab-mantle interface processes that previous studies attributed to talc.
Key Points:
Limited talc formation by Si-metasomatism of ultramafic rocks in subduction zones
Chlorite formation is likely pervasive at the slab-mantle interface
Preferential formation of chlorite has wide-ranging chemical and physical implications for subduction zone processes
Plain Language Summary: In subduction zones, talc can form during chemical reactions of mantle rocks with silica-enriched fluids at the interface between descending oceanic plates and the overriding mantle. Its formation and distribution in subduction zones are believed to affect the volatile budget, rheological properties, and the down-dip limit of the decoupling of the slab-mantle interface. Therefore, illuminating the conditions that facilitate talc formation at high pressure-temperature conditions is key in assessing its roles in fundamental subduction zone processes. Using thermodynamic reaction-path models, we show that the formation of talc at the slab-mantle interface is restricted to a limited set of environmental conditions, because its formation is highly sensitive to the compositions of the mantle rocks and reactant fluids. Contrary to common belief, talc is unlikely to form in high abundance in ultramafic rocks metasomatized by Si-rich slab-derived fluids. Rather, our models predict the ubiquitous formation of chlorite along with other silicate minerals during Si-metasomatism due to the competing effects from other dissolved components that favor their formation over talc. This study calls into question the importance of talc during Si-metasomatism in subduction zones but highlights the more predominant role of chlorite.
Le concept d’eurocompréhension signifie intercompréhension dans les trois grands groupes linguistiques européens, à savoir les langues romanes, slaves et germaniques. Il s’agit, en respectant les objectifs1 de la politique linguistique de l’Union Européenne, de parvenir de façon modulaire au plurilinguisme par le biais de compétences réceptives. Dans ce cadre, les recherches linguistiques effectuées sur l’intercompréhension fournissent les bases de transfert interlangues pour l’exploitation cognitive de la parenté entre les langues des groupes différents. ...
A new method of measuring quality factors in cavities is presented. This method is well suited to measure quality factors in undamped cavities as well as in heavily damped cavities, and in addition this method provides a possibility of separating modes and measuring quality factors especially in cases of overlapping modes. Measurements have been carried out on HOM-damped cavities for the DESY/THD linear collider project. Results are presented.
Plus de la moitié des Européens de l’U.E. parlent une langue romane comme langue maternelle. Parmi les autres Européens, l’apprentissage de langues romanes comme langue étrangère est très fréquent, il n’est dépassé que par l’anglais: Une «Romanophonie» pourrait s’appuyer donc sur une base large, tandis que ses valeurs intercompréhensives ne sont pas encore suffisamment mises à la disposition d’un publique européen. Au contraire: les nations créent de plus en plus des barrières entre les langues romanes en institutionnalisant les différences et non pas ce qu’elles ont en commun. En Allemagne où l’on trouve encore la philologie romane (Romanische Philologie) comme unité d’études on peut observer en même temps une tendance vers une spécialisation en études unilingues (Einzelphilologien). Un tel séparatisme linguistique à l’intérieur d’une seule famille renonce aux avantages intercommunicatifs et intercompréhensifs offerts par les langues romanes. Le phénomène de l’intercompréhension est largement connu, pas seulement parmi les romanistes. C’est le résultat d’une tradition de l’écrit et d’un héritage culturel - une partie importante de l’unité intellectuelle du continent européen - qui rend les langues romanes si accessibles. ...
Determination of field strength and quality factor of heavily HOM damped accelerator cavities
(1992)
Two methods of of measuring field strength in accelerator cavities, heavily damped with respect to higher order modes (HOM), are presented. From the results of the field measurements the coupling (damping) factor and thus the quality factor of the damped resonator can be derived. Measurements of a pillbox resonator with heavily damped TM110-mode (Q < 20) demonstrate the usefulness of the techniques presented, even in this extreme range.
Damping cells for the higher order modes are necessary for the S-band linear collider to minimize BBU (Beam-Break-Up). The construction of the damper cells has to take into account the different field geometries of the higher order modes. So two different types of dampers have been designed: a wall slotted an an iris slotted cell. In order to optimize the two types of damping cells with respect to damping strength, impedance matching between coupling system and waveguide dampers and between damping cell and undamped cells and the tuning system, damping cells of both types have been built and examinated.
Das Neldophon gehört mittlerweile zum internationalen Wortschatz Europas. Neldophonieren ist heute alltägliche Praxis. Die Globalisierung des ausgehenden zweiten Jahrtausends setzt die Entwicklung der Neldophonie voraus, um idealtypisch in naher Zukunft von jedem Punkt der Erde aus mit jedem beliebigen anderen Punkt in neldophonischer Verbindung zu sein. Eurosemantische Gemeinsamkeiten des Neldophonierens und die außersprachliche Partizipiation an der entsprechenden Technologie erleichterten die Akzeptanz des Terminus in den romanischen (und anderen) Sprachen Europas und der Welt trotz des Unikalmorphems Neldo-(vergleichbar mit Him- und Brom- in Him-, bzw. Brombeere) in Verbindung mit dem ansonsten global in verschiedenen Graphien verbreiteten Restmorphem -phon. Wörter haben ihre Geschichte. Der Ausdruck läßt sich auf seinen etymologischen Entstehungsort, den Congrés Europeu sobre Planificació Lingüística (Barcelona 9.-10. November 1995) zurückführen, andem auch der Gründer der FFM teilnahm. Offensichtlich wurde der Terminus hier in internationaler Umgebung erstmalig geprägt und sogleich panromanisch umgesetzt. Die barceloniner Gastgeber sprachen von neldòfon, während hingegen die wenigen Hispanophonen neldófono bevorzugten. Das Verbum neldofonar ist in der Zwischenzeit auch im Portugiesischen belegt, die Académie française wird sich kaum einer Äußerung enthalten können, ob neldophoner oder neldofoner (da offensichtlich im katalanischen Sprachbereich entstanden) die normgerechte Graphie repräsentiere, während Italien den europäischen Neologismus seit dem Herbst 1995 bereits kennt (chiamami più tardi al neldefono) und - zu Recht? - das etymologische ius primi loci beansprucht. In Rumänien erhielt das Verb eine systemimanente Stammerweiterung (Petre neldofoneazã mult) seit 1996. Nach zuverlässigen Quellen (Jernudd 1995) trat der Terminus Ende 1995 in seiner englischen Variante in Honkong in Kontakt mit dem Kantonesischen. Sein Überleben scheint jedoch hier (nach 1997) insbesondere wegen der phonologischen Problematik des liquiden Auslauts der Silbe nel- und diverser noch zu erwartender sprachpolitischer Konflikte nicht gesichert. Da die europäischen Neldophone in USA noch nicht funktionieren, ist eine gewisse Skepsis für den terminologischen Siegeszug der Neldophonie im Amerikanischen Englisch nicht unangebracht. ...
Rezeptive Mehrsprachigkeit ist eine der jüngsten Forderungen der EU-Kommission zum Erreichen einer realistischen Mehrsprachigkeit in Europa. Die maximalistischen Forderungen nach Perfektion in allen sprachlichen Kompetenzen haben sich in den nationalen Unterrichtswesen als illusionär erwiesen, da diese nirgendwo von statistisch nachvollziehbarem Erfolg gekrönt sind. Die sprachliche Diversität im multilingualen Europa findet sich nicht in der Realität der Bildungssysteme wieder. Zwar verfügen heute europaweit 26 % der Europäer über eine zweite und 8% über eine dritte Fremdsprache, in den einzelnen Ländern sieht es jedoch oft desolat aus. Während in den kleineren Unionsländern kaum jemand als nur monolingual gilt (Luxemburg 2%) ist die Krankheit der Einsprachigkeit in den großen EU-Staaten seuchenhaft verbreitet, etwa Großbritannien mit 66%. Dies hat in den neunziger Jahren in der Kommission zu den Postulaten geführt, die sich die Forschergruppe EuroCom als Programm gesetzt hat, nämlich Mehrsprachigkeit über den Einstieg in rezeptive Kompetenzen modularisiert und kognitiv über Transferbasen innerhalb von Sprachfamilien zu erreichen. EuroCom steht dabei als Kürzel für Eurocomprehension, ein Akronym für Europäische Interkomprehension in den drei großen Sprachengruppen Europas, der romanischen, slawischen und germanischen. Die Beschränkung auf rezeptive Kompetenzen ist dabei nur ein methodisches Ausgangsprinzip, das es ermöglicht, Mehrsprachigkeit besonders schnell über das Leseverständnis zu erreichen und modularisiert auf Hörverständnis und aktive Sprechkompetenz sukzessiv auszuweiten. Die Methode EuroCom arbeitet über die Aktivierung intralingualen Wissens mit linguistischem Transfermaterial in nahverwandten Sprachen, das als kognitives Potential den Erschließungsprozess optimiert und in kürzester Zeit ein Lese- und Hörverstehen in einer ganzen Sprachenfamilie erreichbar macht. ...
Accelerating cavities exchange HOM power through interconnecting beam pipes in case of signal frequencies above the cut-off of their propagating waveguide modes. This may lead either to improved HOM damping or - in the case most severe - to unwanted phase coherence of fields to the beam. Therefore the knowledge of the scattering properties of a cavity as a line element is needed to analyse all kinds of RF cavity-cavity interaction. Since there is a lack of measurement tools capable to provide a multidimensional scattering matrix at a given frequency point, we have been developing a method for this purpose. It uses a set of 2-port S-parameters of the device under test, embedded in a number of geometrically different RF environments. The application of the method is demonstrated with copper models of TESLA cavities.
Für Romanisten ist Interkomprehension seit der Begründung ihrer Disziplin ein Anliegen, für romanischsprachige Menschen ist sie meist ein persönliches Erlebnis der partiellen Entdeckung, vor 1500 Jahren war sie alltägliche Realität. Es geht um die Fähigkeit, in einer Gruppe von Sprachen, die einen gemeinsamen Ursprung haben, kommunizieren zu können.
Läßt man die Problematik der bei dieser Aussage verwendeten Ausdrücke außer Betracht und schränkt den Blickwinkel auf die Gruppe der romanischen Sprachen ein, so lassen sich eine Reihe von Aussagen über Interkomprehension machen.
Daß zwischen dem sechsten und achten Jahrhundert, also während der protoromanischen Phase, Interkomprehension zwischen entfernten Gegenden des niedergegangen Imperium Romanum möglich war, ist unstrittig, freilich gab es keine außersprachlichen Gründe, die das Faktum Interkomprehension in den Vordergrund hätten rücken können. Die einzig übriggebliebene Zentralmacht Kirche benutzte ihr eigenes Latein. ...
Der sprachfamilienbezogene Erwerb einer L3 bis Lx hat durch die jüngeren sprachpolitischen Forderungen der Europäischen Kommission 1997 entscheidenden Auftrieb erhalten. Im Livre Blanc sur l´éducation et la formation von 1995 bilanziert die Europäische Kommission das Ergebnis der fremdsprachlichen Bemühungen der großen Flächenstaaten der Union als eher kümmerlich und fordert eine Wende. Künftig soll eine Europäische Mehrsprachigkeit drei Perspektiven aufweisen: eine differenzierte Betrachtung von Kompetenzen (rezeptive Mehrsprachigkeit), die Ermöglichung des gezielten Erwerbs von Teilkompetenzen mit modularen Aufbaumöglichkeiten (fachsprachlicher approach zur rezeptiven Lesekompetenz) und das Nutzen der Verwandtschaftsbeziehungen zwischen Sprachen (u.a. romanische Interkomprehensionsforschung). Diese drei Perspektiven werden in dem dreigliedrigen Projekt zur "Eurocomprehension" der Universität Frankfurt zusammengefaßt. Der Frankfurter Beitrag bezieht sich auf die Gruppe der romanischen Sprachen. ...
Der Begriff Eurocomprehension steht für Europäische Interkomprehension in den drei großen Sprachengruppen Europas, der romanischen, slawischen und germanischen. Es geht der Eurocomprehension darum, unter EU-konformen sprachpolitischen Zielsetzungen Mehrsprachigkeit über den Einstieg in rezeptive Kompetenzen modularisiert zu erreichen. Dabei liefert die linguistische Interkomprehensionsforschung die interlingualen Transferbasen zur kognitiven Nutzung von Verwandtschaftsbeziehungen in Sprachgruppen, die eine Mehrsprachigkeitsdidaktik umsetzt. ...
A new method for the determination of S-matrices of devices in multimoded waveguides and first experimental experiences are presented. The theoretical foundations are given. The scattering matrix of a TESLA copper cavity at a frequency above the cut-off of the second waveguide mode has been measured.
Due to the additional need of very short bunches for the FEL operation with the TESLA-machine strong wakefield effects are expected. One third of the total wakefield energy per bunch is radiated into the frequency region above the energy gap of Cooper pairs in superconducting niobium. The energy of the cooper pairs in superconducting niobium at 2 K corresponds to a frequency of 700 GHz. An analytical and experimental estimation for the overall energy loss of the FEL bunch above energy gap is presented. The analytical method is based on a study from R. B. Palmer [1]. The results of the wakefield estimations are used to calculate possible quality factor reduction of the TESLA cavities during FEL operation. Results are presented.
The operation of a Free Electron Laser (FEL) in the ultraviolet or in the X-ray regime requires the acceleration of electron bunches with an rms length of 25 to 50 mikrometer. The wakefields generated by these sub picosecond bunches extend into the frequency range well beyond the threshold for Cooper pair breakup (about 750 GHz) in superconducting niobium at 2 K. It is shown, that the superconducting cavities can indeed be operated with 25 mikrometer bunches without suffering a breakdown of superconductivity (quench), however at the price of a reduced quality factor and an increased heat transfer to the superfluid helium bath. This was first shown by wakefield calculations based on the diffraction model [1]. In the meantime a more conventional method of computing wake fields in the time domain by numerical methods was developed and used for the wakefield calculations [2]. Both methods lead to comparable results: the operation of TESLA with 25 mikrometer bunches is possible but leads to an additional heat load due to the higher order modes (HOMs). Therefore HOM dampers for these high frequencies are under construction [3]. These dampers are located in the beam pipes between the 9-cell cavities. So it is of interest, if there are trapped modes in the cavity due to closed photon orbits. In this paper we investigate the existence of trapped modes and the distribution of heat load over the surface of the TESLA cavity by numerical photon tracking.
The effect of a single HOM-damper cell within a channel of undamped cells is described theoretically using an equivalent circuit model. From this a simple equation can be derived which relates the Q-value of the single damping-cell, the bandwidth of the passband under consideration, and the additional phase shift which is introduced by the damper cell to provide energy flow into the damper cell. This equation immediately shows the limitations of such single cell damping systems. Comparisons with experimental results are shown.
By replacing the irises in an electron linac by a slit one gets a structure capable of focussing/defocussing an electron beam (rf-quadrupoles). Therefore one can think of a combination of rf- and conventional magnetic quadrupoles for transversal focussing in linear-colliders. Furthermore they can meet the demands of BNS-damping without initial energy spread. Considering multibunch-operation of a collider, the long-range wake behaviour of this kind of structure has to be investigated. A three-cell structure has been built and investigated for dipole-type transversal long-range wakes. The experimental results are compared to numerical simulations done with MAFIA.
Mode propagation in an iris type accelerator section loaded with single heavily HOM-damped cells
(1994)
The wakefield effects in accelerator sections for future linear colliders will be reduced either by damping by detuning or by a combination of both. For the DESY/THD linac [1] it is forseen to employ heavily HOM-damped cells to provide a strong coupling to the TE/TM11-dipole passband as well as to the TM/TE11-dipole passband. For our experiments we have used wall-slotted damping cells. This leads to several problems concerning the propagation of fundamental and HOM-modes. Experimental investigations have been done. Results are presented.
To reach high luminosities in future linear colliders short range wakes havea to be controlled in the range of X-band frequencies or higher. Rectangular irises can be used to introduce strong focusing quadrupole-like rf-fields. Even circular irises in iris-loaded accelarator structures have the capability of focusing if the particle velocity differs from phase velocity. Theoretical investigations concerning the focusing strength to be expected are presented. Their applicability for linear colliders is discussed.
A new method for measuring quality factors in cavities is presented. This method is capable of measuring Q-factors in heavily damped as well as in undamped cavities. In addition, the possibility of separating overlapping modes and measuring their Q-factors is provided. Measurements on HOM (higher order mode) damped cavities for the DESY/THD linear collider project are presented
"Eurocomprehension" is the term used to describe European intercomprehension in Europe’s three major language families, the Romance, the Slavic and the Germanic. The aim of eurocomprehension is to achieve multilingualism conforming to EU language policy goals through the entry-point of receptive competence in a modular structure. Linguistic intercomprehension research forms the transfer bases for the cognitive use of relations between the language groups which didactics of multilingualism implement. ...
To preserve the required beam quality in an e+/e- collider it is necessary to have a very precise beam position control at each accelerating cavity. An elegant method to avoid additional length and beam disturbance is the usage of signals from existing HOM-dampers. The magnitude of the displacement is derived from the amplitude of a dipole mode whereas the sign follows from the phase comparison of a dipole and a monopole HOM. To check the performance of the system, a measurement setup has been built with an antenna which can be moved with micrometer resolution to simulate the beam. Furthermore we have developed a signal processing to determine the absolute beam displacement. Measurements on the HOM-damper cell can be done in the frequency domain using a network analyser. Final measurements with the nonlinear time dependent signal processing circuit has to be done with very short electric pulses simulating electron bunches. Thus, we have designed a sub nanosecond pulse generator using a clipping line and the step recovery effect of a diode. The measurement can be done with a resolution of about 10 micrometers. Measurements and numerical calculations concerning the monitor design and the pulse generator are presented.
Aims: Carotid intima media thickness (CIMT) predicts cardiovascular (CVD) events, but the predictive value of CIMT change is debated. We assessed the relation between CIMT change and events in individuals at high cardiovascular risk.
Methods and results: From 31 cohorts with two CIMT scans (total n = 89070) on average 3.6 years apart and clinical follow-up, subcohorts were drawn: (A) individuals with at least 3 cardiovascular risk factors without previous CVD events, (B) individuals with carotid plaques without previous CVD events, and (C) individuals with previous CVD events. Cox regression models were fit to estimate the hazard ratio (HR) of the combined endpoint (myocardial infarction, stroke or vascular death) per standard deviation (SD) of CIMT change, adjusted for CVD risk factors. These HRs were pooled across studies.
In groups A, B and C we observed 3483, 2845 and 1165 endpoint events, respectively. Average common CIMT was 0.79mm (SD 0.16mm), and annual common CIMT change was 0.01mm (SD 0.07mm), both in group A. The pooled HR per SD of annual common CIMT change (0.02 to 0.43mm) was 0.99 (95% confidence interval: 0.95–1.02) in group A, 0.98 (0.93–1.04) in group B, and 0.95 (0.89–1.04) in group C. The HR per SD of common CIMT (average of the first and the second CIMT scan, 0.09 to 0.75mm) was 1.15 (1.07–1.23) in group A, 1.13 (1.05–1.22) in group B, and 1.12 (1.05–1.20) in group C.
Conclusions: We confirm that common CIMT is associated with future CVD events in individuals at high risk. CIMT change does not relate to future event risk in high-risk individuals.
Die Wirkungsweise des Protonen-Wendellinearbeschleunigers und sein prinzipieller Aufbau werden kurz beschrieben und Angaben über die erreichbare Parallelimpedanz gemacht. Es wird gezeigt, wie durch sektionsweisen Aufbau eine variable Endenergie erzielt und die Kühl- und Fokussierprobleme gelöst werden können. Zwei Konstruktionsbeispiele für kontinuierlichen und gepulsten Betrieb werden näher ausgeführt.