Refine
Year of publication
Document Type
- Doctoral Thesis (23)
- Bachelor Thesis (14)
- Master's Thesis (12)
Has Fulltext
- yes (49)
Is part of the Bibliography
- no (49)
Keywords
- HADES (3)
- ALICE (2)
- Flow (2)
- ALICE <Teilchendetektor> (1)
- ALICE upgrade (1)
- ALICE, Teilchendetektor (1)
- Ageing (1)
- Blei (1)
- CBM (1)
- CBM experiment (1)
Institute
- Physik (49)
Im Rahmen dieser Arbeit wurden grundlegende Eigenschaften von GEM-Verstärkungsstrukturen untersucht. Dies waren der Einfluss des Alignmenteffektes auf die Reproduzierbarkeit von Messungen, die Elektronenextraktionseffizienz von GEMs im allgemeinen und die Auswirkungen von Druckschwankungen auf die Gasverstärkung. Weiterhin wurden verschiedene vierlagige GEM-Verstärkungssysteme mit einer MP-GEM an erster Stelle in Hinblick auf Ionenrückfluss und Energieauflösung untersucht.
Der Alignmenteffekt ist noch nicht vollkommen verstanden und verlangt weitere Untersuchungen. Was aber definitiv gesagt werden kann ist, dass das Drehen der GEMs um 90° die Reproduzierbarkeit der Messergebnisse sicherstellt.
Die unterschiedlichen Elektronenextraktionseffizienzen der verschiedenen GEM-Typen sind noch unverstanden. Auch wenn die grundsätzliche Zunahme der Extraktion mit zunehmenden Transferfeld verständlich ist, so bleibt vor allem das Verhalten einer LP-GEM in diesem Kontext bis jetzt unerklärlich.
Die Versuche mit einer MP-GEM an erster Stelle einer vierlagigen Verstärkungsstruktur haben sich als keine Verbesserung im Vergleich zu den S-Konfigurationen herausgestellt. Auch wenn manche gefundenen Einstellungen die Kriterien von einem IBF von weniger als 1 % und einem σ(55Fe) von weniger als 12 % gleichzeitig erfüllen, liegen diese Messpunkte so knapp an den definierten Grenzen, dass sie nicht für den Betrieb in der Spurendriftkammer von ALICE geeignet sind. Eine Erkenntnis, die trotzdem gewonnen werden konnte, ist, dass sich das Verhalten von verschiedenen Konfigurationen verstehen lässt. So ist die beste untersuchte Konfiguration die MP-LP-LP-S-Konfiguration gewesen, danach folgte die MP-S-LP-S und als schlechteste hat die MP-S-LP-SP-Konfiguration abgeschnitten. Dies ist genau die gleiche Reihenfolge, wie sie auch bei den S-Konfigurationen auftritt: S-LP-LP-S, dann S-S-LP-S und danach S-S-LP-SP. Ein wichtiger Schritt in einem guten Kompromiss zwischen Ionenrückfluss und σ(55Fe), scheinen zwei LP-GEMs an zweiter und dritter Stelle zu sein und weniger der Lochabstand der letzten GEM.
Die Druckabhängigkeit der Gasverstärkung hat einen großen Einfluss auf die Verstärkung und damit auf die Reproduzierbarkeit von Messungen. Bei einem Höhenunterschied von ca. 400 m ergibt sich eine Änderung der Verstärkung von ca. 35 %. Zusätzlich wird dieser Effekt von lokalen Wetterbedingungen überlagert. Der Einfluss des Luftdruckes kann jedoch mit dem Fit in Abbildung 43 berücksichtigt und damit herausgerechnet werden
The Time Projection Chamber (TPC), a large gaseous detector, is the main particle identification device of the ALICE experiment at the CERN LHC. The desired performance of the TPC defines the requirements for the gas mixture used in the detector. The active volume was filled with either Ne-CO2 (90-10) or Ne-CO2-N2 (90-10-5) during the first LHC running period. For LHC Run 2 the gas mixture is changed to Ar-CO2. Calculations of relevant gas properties are performed for Ar-based gas mixtures and compared to Ne-based gas mixtures to identify the most suitable Ar mixture. The drift velocity of ions in Ar is lower than in Ne. The closing time of the gating grid has to be adjusted accordingly to avoid drift field distortions due to back-drifting ions. The drift times of ions in the TPC readout chambers are calculated for the respective gas mixtures to determine the time to collect all ions from the amplification region. For LHC Run 3 the TPC readout chambers will be upgraded. The Multiwire Proportional Chambers (MWPCs) will be replaced by readout chambers based on Gas Electron Multipliers (GEMs) which are operated in continuous mode. As a consequence an ion backflow of the order of 1% causes significant space-charge distortions in the TPC drift volume. Similar distortions are expected in data taken specifically for the study of space-charge effects at the end of Run 1. The gating grid of the MWPCs is operated in the open state allowing the ions from the amplification region to enter the drift volume. The magnitude of the distortions in this data is measured and compared to the expectations for the TPC upgrade and results from current simulations.
Da in der Run 3 Periode des CERN LHC die Kollisionsrate auf 50 kHz erhöht werden soll, muss die ALICE TPC umgebaut werden. Die Vieldrahtproportionalkammern mit Sperrgitter sollen gegen eine GEM-basierte Auslese ausgetauscht werden, um eine kontinuierliche Auslese zu ermöglichen.
Es wurde eine GEM-Testkammer, die mit drei und vier GEM-Folien betrieben werden kann, entwickelt und gebaut. GEM-Folien wurden unter dem Mikroskop auf Fehler untersucht und auf ihre Spannungsfestigkeit hin getestet sowie gerahmt und in die Kammer eingesetzt. Mit der fertigen kleinen TPC mit GEM-basierter Auslese wurden IBF und Energieauflösung gemessen. Ziel der Messungen war es, einen möglichst geringen IBF von unter 1 % zu erhalten, um so wenig wie möglich Feldverzerrungen im Driftvolumen der TPC zu erhalten, bei gleichzeitig guter Energieauflösung von mindestens 12 %, um eine gute Teilchenidentifikation in der TPC sicherzustellen.
Da standard GEM-Konfigurationen mit nur drei GEM-Folien zwar eine gute Energieauflösung, jedoch zu viel IBF aufweisen, wurden die Messungen hauptsächlich mit vier GEM-Folien durchgeführt. Es wurden zwei verschiedene Arten von GEM-Folien verwendet, Standard (S) und Large-Pitch (LP) GEM-Folien, die bei einem Großteil der Messungen in der S-LP-LP-S-Konfiguration angeordnet waren.
Es wurde festgestellt, dass sich IBF und Energieauflösung gegenläufig verhalten, bei besser werdendem IBF also die Energieauflösung schlechter wird und umgekehrt.
Es wurden zwei verschiedene Gasmischungen, Ne-CO2-N2 (90-10-5) und Ar-CO2 (90-10), untersucht. Mit Neon wurde bei einem Gain von 2000 gemessen, mit Argon nur bei einem Gain von 1000, da bei Argon die Anzahl der produzierten Elektronen pro cm etwa doppelt so groß ist.
Der IBF war mit beiden Gasmischungen etwa gleich groß. Die Energieauflösung war mit Argon jedoch aufgrund des niedrigeren Gains erheblich schlechter. Mit Ne-CO2-N2 (90-10-5) gelang es, einen Arbeitspunkt mit einer Energieauflösung von etwa 12 % und einem IBF von unter 1 % zu finden, mit Ar-CO2 (90-10) war dies jedoch nicht der Fall.
Im Laufe dieser Bachelor-Arbeit wurden verschiedene GEM-Anordnungen systematisch auf ihr IBF-Verhalten hin untersucht. Neben der Reproduktion zuvor durchgeführter Messungen wurden auch neue GEM-Kombinationen getestet. Insbesondere lag der Fokus darauf, eine Verbesserung des IBFs gegenüber des Baseline-Setups zu erzielen. Dabei kamen neben der bisher verwendeten S und LP Folien auch SP Folien zum Einsatz. Die Messungen brachten jedoch kein Ergebnis hervor, welches als Verbesserung gegenüber der Ausgangslage angesehen werden könnte. Da mit SP GEMs zuvor wenig gearbeitet wurde, war es unter anderem ein Ziel, zu untersuchen, wie sich die Verwendung dieser GEMs auf den IBF auswirkt. Insbesondere war die Frage zu klären, ob durch ihre Verwendung der IBF des Baseline-Setups
verbessert werden kann. Zum besseren Verständnis wurde ebenfalls eine Variante, S-S-LPS, untersucht. Für dieses Setup konnte durch die Verwendung einer SP Folie auf Position 4 eine Verbesserung des IBF bewirkt werden, für das Baseline-Setup jedoch nicht. Ein wesentliches Ergebnis dieser Bachelor-Arbeit war, dass das Alignment der GEMs, entgegen bisheriger Annahmen, eine große praktische Relevanz hat. Die relative Orientierung zweier aufeinander folgender GEMs gleichen Lochabstands zueinander hat einen großen Ein
uss auf die lokale Ionentransmission. Eine genauere Untersuchung hat ergeben, dass man dem entgegenwirken kann, indem man aufeinander folgende GEMs um 90° gedreht einbaut. Aufgrund der Geometrie der Folien verhindert man dadurch, dass sich die Löcher zweier Folien direkt ßber- bzw. untereinander anordnen. Ein solcher Aufbau konnte durch eine geringfügige Modifikation der Testkammer erreicht werden.
Mit diesem veränderten Aufbau wäre es nun das Ziel gewesen, alle bisherigen Messungen zu wiederholen und auf Reproduzierbarkeit hin zu überprüfen. Die Wiederholung einer Messreihe mit um 90° gedrehten GEMs hat im Rahmen der Fehlertoleranzen reproduzierbare
Ergebnisse geliefert. Aus zeitlichen Gründen war es jedoch im Rahmen dieserArbeit nicht möglich, eine vollständige Wiederholung aller Messungen durchzuführen. Dies wurde zu einem späteren Zeitpunkt von anderen Personen getan.
In dieser Arbeit wurden die ersten Schritte unternommen um Elektronen aus den Zerfällen schwerer Quarks zu messen. Im Folgenden wird zunächst ein Überblick zum physikalische Hintergrund gegeben und der elliptische Fluss als Sonde zur Untersuchung des QGP motiviert. Anschließend werden der LHC und ALICE näher beleuchtet und die einzelnen Detektorsysteme, die für diese Analyse wichtig sind, vorgestellt. Im weiteren wird eine Methode zur Identifizierung von Elektronen vorgestellt und die Kontamination des Elektronensignals durch Hadronen bestimmt. Abschließend wird der elliptische Fluss eines von Hadronen bereinigten Inklusiv-Elektronen Spektrums bestimmt und ein Ausblick auf weitere Analyseschritte gegeben.
The strong nuclear force is described by Quantum Chromodynamics (QCD), the parallel field theory to Quantum Electrodynamics (QED) that describes the electromagnetic force. It is propagated by gluons analogously to photons in the electromagnetic force, but unlike photons, which do not carry electric charge, gluons carry color, and they can self-interact. However, as individual quarks have never been observed in nature, it is postulated that the color charge itself is confined, and hence all baryons and mesons must be colorless objects. To study nuclear matter under extreme conditions, it is necessary to create hot and dense nuclear matter in the laboratory. In such conditions the confinement between quarks and gluons is cancelled (deconfinement). This state is characterized with a qusi-free behavior of quarks and gluons. The strange (s) and anti-strange (anti-s) quarks are not contained in the colliding nuclei, but are newly produced and show up in the strange hadrons in the final state. It was suggested that strange particle production is enhanced in the QGP with respect to that in a hadron gas. This enhancement is relative to a collision where a transition to a QGP phase does not take place, such as p+p collisions where the system size is very small. Therefore the energy- and system size dependence is studied to receive a picture about the initial state. In this thesis experimental results on the energy- and system size dependence of Xi hyperon production at the CERN SPS is shown. All measurements were performed with the NA49 detector at the CERN SPS. NA49 took central lead-lead collisions from 20 - 158 AGeV, minimus bias lead-lead collisions at 40 and 158 AGeV, and semi-central silicon-silicon colisions at 158 AGeV. The NA49 experiment features a large acceptance in the forward hemisphere allowing for measurements of Xi rapidity spectra. At the SPS accelerator at CERN Pb+Pb collisions are performed with beam energies to 158 AGeV. The analyzed data sets were taken in the period from 1999 to 2002. The NA49 experiment is a large acceptance hadron spectrometer, which measures charged hadrons in a wide acceptance. The main components are the four TPCs (Time Projection Chamber). The centrality of nucleon-nucleon collisions was done by measuring the not in the collision participating (spectator-) nucleons in the VETO-calorimeter. The study of strangeness is motivated by its role as a signature for the Quark Gluon Plasma. Any enhancement in the yield must be with respect to a ’normal’ yield, where a QGP is not formed. This is usually taken to mean suitably scaled p+p collisions, where the volume of the system created is too small for a QGP to occur. The results at SPS and RHIC energies show an enhancement, with the doubly strange Xi? being enhanced more than the Lambda, in accordance with the original prediction. However, the enhancement at SPS energies is higher than at RHIC energies.
The production of quarkonia, the bound state of an heavy quark with its anti-particle, has for a long time been seen as a key process to understand the properties of nuclear matter in a relativistic heavy-ion collision. This thesis presents studies on the production of quarkonia in heavy-ion collisions at the new Large Hadron collider (LHC). The focus is set on the decay of J/Psi and Upsilon-states into their di-electronic decay channel, measured within the central detectors of the ALICE detector.
Optimierung der Rekonstruktionsparameter zur Messung von Quarkonia im zentralen ALICE Detektor
(2011)
Seit den ersten Kollisionen im November 2009 läuft der LHC am CERN und dringt in noch nie dagewesene Energiebereiche vor. Die Schwerionenkollisionen innerhalb des ALICE Detektors sollen Aufschluss über die stark wechselwirkende Materie und ihre verschiedenen Phasen geben. Dem liegt die Untersuchung des Quark-Gluon-Plasmas zugrunde. Eine Signatur des Quark-Gluon-Plasmas ist die Rate von produzierten Quarkonia. Diese zerfallen in Leptonenpaare und sind damit zu identifizieren.
In der vorliegenden Arbeit wird diese Rate zur Messung von Quarkonia aufgegriffen und untersucht. Bei der Untersuchung der Simulation durch die Selektion der e++e--Paare, die ausschließlich aus einem J/y stammen, lässt sich ein Massenspektrum produzieren, das im Rahmen dieser Arbeit genauer betrachtet wurde. Durch die genaue Untersuchung der Bremsstrahlung und deren Lokalisierung lässt sich zeigen, dass besonders der ITS ein hohes Maß an Bremsstrahlungsprozessen mit sich bringt, was auf die große Materialanhäufung zurückzuführen ist. Um dies näher zu untersuchen, wurde das Augenmerk auf den ITS gelegt. Eines der wichtigsten Merkmale, die den Bremsstrahlungsprozess beschreiben, ist der Energieverlust. Durch die Bethe-Heitler-Funktion lässt sich der gesamte Detektor nur bedingt beschreiben. Erst die Betrachtung, die sich mit einer Einschränkung auf den ITS und den Azimutwinkel beschäftigt, zeigt eine genaue Beschreibung durch die Parameter der Funktion.
Nach der genauen Beschreibung der Bremsstrahlung wurden verschiedene Methoden entwickelt, in denen die Bremsstrahlungsprozesse innerhalb des invarianten Massenspektums der e++e--Paare ausgeschnitten werden können. Die Methoden der Selektion durch die Anzahl der Spurpunkte sowie die Selektion durch die Position der Spurpunkte zeigen, dass bereits minimale Selektionen ein sehr gutes Signal ergeben. Durch den Vergleich mit den herkömmlichen Selektionen SPDany und SPDfirst, zeigt sich, dass hierbei viel Signal verloren geht und diese Methode für bestimmte Analysen optimiert werden kann.
Durch die Anwendung auf die Datensätze, die während einer Strahlzeit im Jahr 2010 genommen wurden, bestätigte sich die Vermutung. Durch die Selektion von SPDany wird das Signal reduziert. Vergleicht man die Anzahl der Einträge im Signalbereich durch die Reduktion der Teilchen ohne Spurpunkte im ITS (NITSpunkten>0) zu der Anzahl der Einträge durch SPDany, ergibt dies eine Verminderung von bis zu 40%. Die Ursache für den großen Verlust innerhalb des Signalbereichs wird zusätzlich verstärkt, indem der SPD durch Kühlungsprobleme ausgeschaltet ist.
Eine weitere Methode, die untersucht wurde, war die Reduktion der Auswirkungen von Bremsstrahlung mit Hilfe der Kinkanalyse. Diese Methode ließ keine qualitativen Rückschlüsse auf die Analyse der Bremsstrahlung zu.
Dennoch zeigt das Ergebnis, dass das Signal von J/y’s in Proton-Proton Kollisionen um mehr als 40% mehr Einträge verbessert werden kann und sich dieses Prinzip nicht nur theoretisch in den simulierten Daten niederschlägt sondern auch in den untersuchten Datensätzen. Nun gilt es, diese Methode auch in anderen Studien einzubauen, um so eine alltagstaugliche Überprüfung der Erkenntnisse zu gewährleisten.
Zunächst sind einige Methoden und Techniken zusammenfassend aufzuzählen, welche mir in meiner Zeit am IKF nahegebracht wurden.
Von technischer Seite her sind hier der Umgang mit der Instituts-eigenen Lichtmikroskop und den pA-Messgeräten sowie der analogen Messkette zu nennen. Außerdem gegebenen GEM-Folien auf Fehlstellen zu untersuchen, sie unter Spannung zu testen und anschließen in die Testkammer zu montieren und diese anschließend ordnungsgemäß in Betrieb zu nehmen. Während des Betriebs der Kammer sind neben den Messungen selbst auch die Programmierung in C++ um ein vorhandenes GUI zu verstehen und erweitern zu können zu nennen. In der Analyse der gewonnenen Daten ist vor allem die im Institut verbreiteten Analyse-Software „Root“ zu nennen um Daten zu verarbeiten, zu plotten und zu fitten.
Der physikalische Gehalt der Messungen war in Folge der ersten Messung nicht mit Sicherheit zu bestimmen, da die Raten-Abhängigkeit des IB entweder grundlegender physikalischer oder technischer Natur sein konnte, was näher zu untersuchen blieb. Nach wiederholter Messung mit größerem Messbereich und einer zweiten Messreihe mit einer anderen Gas-Mischung konnten jedoch Aussagen getroffen werden.
So konnte in der Argon-Messung die gleiche Raten-Abhängigkeit des IBF wie zuvor festgestellt werden, während der IBF in der Neon-Mischung kaum merklich anstieg. Außerdem ist festzuhalten, dass Messungen an der Kathode nur über 10 pA problemlos genau sind. Darunter werden die Werte bei zu wenig Messzeit weniger aussagekräftig.
Ziel der Bachelorarbeit war es, einen Versuch für das Fortgeschrittenen-Praktikum des Instituts für Kernphysik zu konzipieren, der es ermöglicht, die Lebensdauer von aus der kosmischen Strahlung entstandenen Myonen zu bestimmen.
Dazu wurden vorhandene Komponenten auf ihre Gebrauchstauglichkeit getestet und untersucht, insbesondere in Bezug auf die Größe der Szintillatoren, ob der für einen Praktikumsversuch zeitlich gegebene Rahmen eingehalten werden kann.
Es ergaben sich einige mechanische Probleme, insbesondere bei der Verbindung der neuen, größeren Szintillatoren mit den Photomultipliern, die angegangen wurden. Die zuerst getestete Methode stellte sich jedoch als uneffektiv heraus, sodass die endgültige Lösung mit Hilfe einer neuen, computergesteuerten Fräsmaschine der Feinmechanik-Werkstatt erreicht werden soll.
Um die entstandenen Daten zu verarbeiten, wurde ein entsprechendes Programm in LabVIEW entwickelt, das die am TDC abgegriffenen Daten auf ihre Relevanz untersucht und die Ergebnisse in eine Textdatei schreibt. Das LabVIEW Front Panel wurde dabei so gestaltet, dass es den Praktikanten alle wichtigen Daten in graphisch anschaulicher Weise liefert.
Die Daten aus der Textdatei werden dann mit Hilfe eines ROOT Makros mit zwei verschiedenen Exponentialfunktionen gefittet.
In ersten Messungen ergibt sich ein Wert für die Lebensdauer der Myonen, der erstaunlich nahe am Literaturwert liegt.
Heavy-ion collisions at ultra-relativistic energies allow access to the Quark-Gluon Plasma, the deconfined phase of the strong interaction, a state which is believed to have existed fractions of seconds after the big bang. Two-particle correlations at small relative momenta, and particularly their dependence on pair transverse mass, are distinctly sensitive to the reaction dynamics of the fireball created in heavy-ion collisions.
Being the heaviest system to extract a size of the particle emitting source, proton-lambda correlations extend the studied range in pair transverse mass and are therefore well suited to explore the dynamical behavior of the matter created in Pb-Pb collisions at the Large Hadron Collider. The centrality dependence of the extracted source radii affirms the expectations of a larger source for more central collisions. Source radii were attained over a span of more than 0.9 GeV/c2 in mean pair transverse mass with a source radius extracted for a mean transverse mass as high as 2.18 GeV/c2. The source radii decrease with increasing pair transverse mass, as expected in a hydrodynamical picture. The comparison with radii obtained from other particle species exhibits the clear breaking of an elsewhere proposed scaling behavior of source radii with mean pair transverse mass for all particle species.
Gamma-gamma correlations possibly allow to look past the barrier of kinetic freeze-out. Additionally, they bear the potential to solve the puzzling observation in heavy-ion collisions of an excess of photons with a large temperature-like inverse slope parameter on the one hand and an elliptic flow coefficient of photons comparable to the one of hadrons on the other hand. A striking signal in the two-photon correlation function is observed; however it seems likely to not be of quantum statistical origin. A path for further studies is laid out.
During RUN3 (2021-2023) of the Large Hadron Collider, the Time Projection Chamber (TPC) of ALICE will be operated with quadruple stacks of Gas Electron Multipliers (GEMs). This technology will allow to overcome the rate limitation due to the gated operation of the Multi-Wire Proportional Chambers (MWPCs) used in RUN1 (2009-2013) and RUN2 (2015-2018).
As part of the Upgrade project, long-term irradiation tests, so called "ageing tests", have been carried out. A test setup with a detector using a quadruple stack of 10x10cm2 GEMs was built and operated in Ar-CO2 and Ne-CO2-N2 gas mixtures. The detector performance such as gas gain and energy resolution were monitored continuously. In addition, outgassing tests of materials used for the assembly process of the upgraded TPC were performed. To reach the expected dose of the GEM-based TPC, the detector was operated at much higher gains than the TPC. It was found, that the GEMs could keep their performance within the projected lifetime of the TPC. Most of the tested materials showed no negative impact on the detector. For the tested epoxy adhesive no certain conclusion could be drawn.
At much higher doses than expected for the upgraded TPC, a new phenomenon was observed, which changed the hole geometry of the GEMs and led to a degradation of the energy resolution. Even though its occurrence is not expected during the lifetime of the GEM-based TPC, simulations were carried out to study this effect more systematically. The simulations confirmed, that a change of the hole geometries of the GEMs, lead to an increase of the local gain variation, which results in a decrease of the energy resolution.
Furthermore the effect of methane as quench gas on GEMs was studied, even though this gas is not foreseen to be used in the TPC. From ageing tests with single-wire proportional counters it is well known that hydrocarbons are produced in the plasma of the avalanches, which cover the electrodes and lead to a degradation of the detector performance. Even though GEMs have a quite different geometry, the ageing tests showed, that also this technology tends to methane-induced ageing. A loss of gas gain as well as a degradation of the energy resolution due to deposits on the electrodes was monitored. A qualitative and quantitative comparison between ageing in GEMs and proportional counters was performed.
The measurement of dielectrons (electron-positron pairs) allows to investigate the properties of strongly interacting matter, in particular the Quark-Gluon Plasma (QGP), which is created in relativistic heavy-ion collisions at the LHC. The evolution of the collision can be probed via dielectrons since electrons do not interact strongly and are created during all stages of the collision. One of the interests in dielectron measurements is motivated by possible modifications of the electromagnetic emission spectrum in the QGP, where pp collisions are used as a medium-free reference. The dielectron spectrum consists of contributions from various processes. In order to estimate contributions of known dielectron sources, simulations of the so-called dielectron cocktail are performed. In this thesis, dielectron cocktails in minimum bias pp collisions at p s = 7 TeV, p–Pb collisions at p sNN = 5.02 TeV and in central (0-10%) and semi-central (20-50%) Pb–Pb collisions at p sNN = 2.76 TeV at the LHC are presented.
The main focus of research in the field of high-energy heavy-ion physics is the study of the quark-gluon plasma (QGP). Topic of the present work is the measurement of electron-positron pairs (dielectrons), which grant direct access to some of the key properties of this state of matter, since after their formation they leave the hot and dense medium without significant interaction. In particular, the measurement of the initial QGP temperature is considered a "holy grail" of heavy-ion physics. Therefore, in addition to the analysis of existing data, a feasibility study has been conducted to determine to which extent this goal would be achievable by upgrading the ALICE experiment at CERN.
Dielectrons are produced during all stages of a heavy-ion collision, with their invariant mass reflecting the amount of energy available at the time of their formation. Dielectrons of highest mass are thus produced in the initial scatterings of the colliding nuclei by quark-antiquark annihilation. Correlated electron-positron pairs can also emerge from the decay chains of early-produced pairs of heavy-flavour (HF) particles. During the QGP stage and at the beginning of the hadronic phase, the system emits thermal radiation in the form of photons and dielectrons, which carry information about the medium temperature to the observer. In the final stage of the collision, decays of light-flavour (LF) hadrons produce additional contributions to the dielectron spectrum.
The present work is based on early data from the ALICE experiment recorded from lead-lead collisions at a center-of-mass energy of 2.76 TeV. Due to the limited amount of data, a focus is placed on achieving high efficiencies throughout the analysis. To this end, a special electron identification strategy is developed and a custom track selection applied, together resulting in a tenfold increase in pair efficiency. The dielectron spectrum is evaluated on a statistical basis, using a pair prefilter, which is optimized based on two signal quality criteria, to reduce the fraction of electrons and positrons from unwanted sources at minimum signal loss. In addition, an artifact of the track reconstruction is exploited to suppress pairs from photon conversions and to correct the dielectron yield for a contribution from different-conversion pairs. The main signal uncertainty is extracted from the deviation between results of 20 analysis settings and amounts to 20% in most of the studied kinematic range.
For comparison with the analysis results, a hadronic cocktail consisting of the LF and HF contributions is simulated, which can reasonably well describe the measured dielectron production, with a hint of an enhancement at low invariant mass. Two approaches to model the in-medium modification of the heavy-flavour are followed, resulting in up to 50% suppression, which creates some additional space for a thermal contribution at intermediate mass.
For a complete comparison between experimental data and theoretical expectation, two model calculations are consulted. The Thermal Fireball Model provides predictions for thermal dielectron radiation from the QGP and hadron gas. The data tends to be better described with these additional thermal contributions. For a comparison with a prediction by the UrQMD model, the HF component of the cocktail is subtracted from the data. This results in better agreement if the HF suppression by in-medium effects is taken into account.
The feasibility study in this work has served as a physical motivation for the ALICE upgrade for LHC Run 3. The precision with which the early temperature of the QGP can be determined via dielectrons is chosen as key observable. A multitude of individual contributions are merged into a fully modeled dielectron analysis. The resulting signal-to-background ratio represents some of the expected systematic uncertainties, while from the significance combined with the planned number of lead-lead collisions a realistic "measurement" with statistical fluctuations around the expected dielectron signal is generated using a Poisson sampling technique. Since the HF yield exceeds the QGP thermal radiation by about an order of magnitude, an additional analysis step exploiting the enhanced track reconstruction is introduced to reduce its contribution by up to a factor of five. The resulting reduction in pair efficiency is overcompensated by an up to hundred times higher collision rate. The entire cocktail is then subtracted from the sampled data to isolate the thermal excess yield. The final analysis of this spectrum shows that the inverse slope of the model prediction, which depends directly on the QGP temperature, can be reproduced within statistical and systematic uncertainties of about 10%.
The promising results of this study have contributed on the one hand to the realization of the ALICE upgrade and to a design decision for the new Inner Tracking System, and at the same time represent exciting predictions for upcoming measurements.
Das CBM-Experiment konzentriert sich auf die Untersuchung der Eigenschaften des Quark-Gluon-Plasmas bei hohen Netto-Baryonendichten und moderaten Temperaturen. An der zukünftigen Beschleunigeranlage FAIR an der GSI findet das Experiment, neben vielen anderen Experimenten, ihren Platz. Der TRD ist, neben dem RICH, STS und TOF, einer der zentralen Detektoren im CBM-Experiment. Der TRD nutzt dabei den physikalischen Effekt der Übergangsstrahlung, die durch ein geladenes Teilchen beim Durchqueren einer Grenze zweier Medien mit unterschiedlichen Dielektrizitätskonstanten mit einer gewissen Wahrscheinlichkeit entsteht, um Elektronen von Pionen trennen zu können. Im Jahr 2017 wurde an der DESY 4 TRD-Prototypen in einer Teststrahlzeit getestet. Dabei handelt es sich um große TRD-Module mit den Maßen 95 · 95 cm2 , was dem finalen Design sehr nahe kommt. Die Untersuchung der DESY-Daten in Kapitel 5 brachte große Problematiken in den Daten zum Vorschein. Die Hauptprobleme der DESY-Daten sind: 1) Bug des SPADIC-Chips 2.0, bei der FN-Trigger zeitlich verschoben wurden; 2) schwache und suboptimale Trigger-Bedingung, wodurch sehr viel Rauschen aufgenommen wurde. Die Daten müssen für weitere Auswertung aufbereitet werden, wobei sehr viel Information und Statistik verloren geht, da einige Daten durch diverse Probleme nicht mehr rekonstruierbar sind. Kapitel 6 beschäftigt sich mit der Simulation der Detektorantwort und geht genauer auf die einzelnen Schritte, die zur Simulation des vom SPADIC erzeugten Pulses benötigt werden, ein. Am Ende werden Ergebnisse aus beiden Datensätzen miteinander verglichen. Um einen optimalen Vergleich zu gewähren, wird die Simulation bestmöglich an die Einstellungen in der Teststrahlzeit angepasst. Hauptsächlich geht es um die Erhöhung des Gasgains und der Verschiebung der Peaking-Zeit des Pulses. Im Allgemeinen können wir in der Simulation einige Effekte, die auch in den DESY-Daten vorkommen, nachsimulieren. Wir erhalten zum Teil sehr unterschiedliche Ergebnisse in der Simulation, deren Richtigkeit nicht verifiziert werden kann, da die Daten aufgrund der Probleme unzuverlässig werden. Durch die Analyse der DESY-Daten konnten wir die Problematik in den Daten besser verstehen. Eine sinnvolle Anpassung der Simulation wird durch die Unzuverlässigkeit der DESY-Daten unmöglich. Für die Optimierung der Simulation müsste man einen Vergleich mit neueren, zuverlässigeren Daten aus zukünftigen Teststrahlzeiten nehmen.
Quarkonia are very promising probes to study the quark-gluon plasma. The essential baseline for measurements in heavy-ion collisions is high-precision data from proton-proton interactions. However, the basic mechanisms of quarkonium hadroproduction are still being debated. The most common models, the Color-Singlet Model, the non-relativistic QCD approach and the Color-Evaporation Model, are able to describe most of the available cross-section data, despite of their conceptual differences. New measures, such as the polarization, and data at a new energy regime are crucial to test the competing models. Another issue is an eventual interplay between the production process of a quarkonium state and the surrounding pp event. Current Monte Carlo event generators treat the hard scattering independently from the rest of the so-called underlying event. The investigation of possible correlations with the pp event might be very valuable for a detailed understanding of the production processes. ALICE ist the dedicated heavy-ion experiment at the LHC. Its design has been optimized for high-precision measurements in very high track densities and down to low transverse momenta. ALICE is composed of various different detectors at forward and at central rapidities. The most important detectors for this study are the Inner Tracking System and the Time Projection Chamber, allowing to reconstruct and identify electron candidate tracks within eta < 0.9. The Transition Radiation Detector has not been utilized at this stage of the analysis; however, it will strongly improve the particle identification and provide a dedicated trigger in the upcoming beam periods. ...
In April and May 2012 data on Au+Au collisions at beam energies of Ekin = 1.23A GeV were recorded with the High Acceptance Di-Electron Spectrometer, which is located at the GSI Helmholtz Center for Heavy Ion Research in Darmstadt, Germany. At this beam energy all hadrons containing strangeness are produced below their elementary production threshold. The required energy is not available in binary NN collisions but must be provided by the system e.g. through multi-particle interactions or medium effects like a modified in-medium potential (e.g. KN/ΛN potential). Thus, a high sensitivity to these medium effects is expected in the investigated system.
The baryon-dominated systems created in relativistic heavy-ion collisions (HIC) at SIS18 energies reach densities of about 2-3 times ground state density p0 and may be similar to the properties of matter expected in the inner core of neutron stars. It is in particular the behavior of hadrons containing strangeness, i.e. kaons and hyperons, and their potentials in the dense medium which may have severe implications on astrophysical objects and processes. As ab-initio calculations of quantum chromodynamics (QCD) cannot be performed rigorously on the lattice at finite baryo-chemical potentials due to the fermion sign problem, effective descriptions have to be used in order to model properties of dense systems and the involved particles. The only way to access the in-medium potential of strange hadrons above nuclear ground state density p0 is by comparing data from relativistic HIC to such effective microscopic models. Up to now, not much data on neutral kaons and Λ hyperons are available from heavy collision systems close to their NN production threshold. These two electromagnetically uncharged strange hadrons are in particular well suited to study their potential in a dense nucleon-dominated environment as their kinematic spectra are not affected by Coulomb interactions.
In this thesis, the production of charged kaons and Φ mesons in Au+Au collisions at sqrt sAuAu = 2.4 GeV is studied. At this energy, all particles carrying open and hidden strangeness are produced below their respective free nucleon-nucleon threshold with the corresponding so-called excess energies: sqrt sK+ exc = -0.15 GeV, sqrt sK- exc = -0.46 GeV, sqrt sΦ exc = -0.49 GeVGeV. As a consequence, the production cross sections are very sensitive to medium effects like momentum distributions, two- or multistep collisions, and modification of the in-medium spectral distribution of the produced states [1]. K+ and K- mesons exhibit different properties in baryon dominated matter, since only K- can be resonantly absorbed by nucleons. Although strangeness exchange reactions have been proposed to be the dominant channel for K- production in the analyzed energy regime, the production yield and kinematic distributions could also be explained in smaller systems based on statistical hadronization model fits to the measured particle yields, including a canonical strangeness suppression radius RC, and taking the Φ feed-down to kaons into account [2, 3]. For the first time in central Au+Au collisions at such low energies, it is possible to reconstruct and do a multi differential analysis of K- and Φ mesons. In principle, this should be the ideal environment for strangeness exchange reactions to occur, as the particles are produced deeply sub-threshold in a large and long-living system. Therefore, it is the ultimate test to differentiate between the different sources for K- production in HIC.
In total 7.3x10exp9 of the 40% most central Au(1.23 GeV per nucleon)+Au collisions are analyzed. The data has been recorded with the High Acceptance DiElectron Spectrometer HADES located at Helmholtzzentrum für Schwerionenforschung GSI in April/May 2012. A substantially improved reconstruction method has been employed to reconstruct the hadrons with high purity in a wide phase space region.
The estimated particle multiplicities follow a clear hierarchy of the excess energy: 41.5 ± 2.1|sys protons at mid-rapidity per unit in rapidity, 11.1 ± 0.6|sys ± 0.4|extrapol π-, (3.01 ± 0.03|stat ± 0.15|sys ± 0.30|extrapól) x10 exp -2 K+, (1.94 ± 0.09|stat ± 0.10|sys ± 0.10|extrapol)x10 exp -4 K- and (0.99 ± 0.24|stat ± 0.10|sys ± 0.05|extrapol)x10 exp -4 Φ per event. The multiplicities of the strange hadrons increase more than linear with the mean number of participating nucleons hAparti, supporting the assumption that the necessary energy to overcome the elementary production threshold is accumulated in multi-particle interactions. Transport models predict such an increase, but are overestimating the measured particle yield and are not able to describe the kinematic distributions of K+ mesons perfectly. However, the best description is given by the IQMD model with a density dependent kaonnucleon potential of 40 MeV at nuclear ground state density.
The K-=K+ multiplicity ratio is constant as a function of centrality and follows with (6.45 ± 0.77)x10 exp -3 the trend of increasing with beam energy indicated from previous experiments [4]. The effective temperature of K- TK+eff = (84 ± 6) MeV is found to be systematically lower than the one of K+ TK+eff = (104 ± 1) MeV, which has also been observed by the other experiments.
The Φ=K- ratio is with a value of 0.52 ± 0.16 higher than the one obtained at higher center-of-mass energies and smaller systems. This behavior is predicted from a tuned version of the UrQMD transport model [5], when including higher mass baryonic resonances which can decay into Φ mesons and from statistical hadronization models when suppressing open strangeness canonically. The found ratio is constant as a function of centrality and results with a branching ratio of 48.9%, that ~ 25% of all measured K- originate from Φ feed-down decays. A two component PLUTO simulation, consisting of a pure thermal and a K- contribution originating from Φ decays, can fully explain the observed lower effective temperature in comparison to K+ and the shape of the measured rapidity distribution of K-. As a result, we find no indication for strangeness exchange reactions being the dominant mechanism for K- production in the SIS18 energy regime, if taking the contribution from Φ feed-down decays into account.
The hadron yields for the 20% most central collisions can be described by a statistical hadronization model fit with the chemical freeze-out temperature of Tchem = (68 ± 2) MeV and baryochemical potential of μB = (883 ± 25) MeV, which is higher than expected from previous parameterizations. The analysis of the transverse mass spectra of protons indicate a kinetic freeze-out temperature of Tkin = (70 ± 4) MeV and radial flow velocity of βr = 0.43 ± 0.01, which is in agreement with the parameters obtained from the linear dependence of the effective temperatures on the particle mass Tkin = (71.5 ± 4.2) MeV and βr = 0.28 ± 0.09.
HADES (High Acceptance DiElectron Spectrometer), located at GSI, is a versatile detector for precise spectroscopy of e+ e- pairs and charged hadrons produced on a fixed target in a 1 to 3.5 AGeV kinetic beam energy region. The main experimental goal is to investigate properties of dense nuclear matter created in heavy ion collisions and learn about in-medium hadron properties.
In the HADES set-up 24 Mini Drift Chambers (MDC) allow for track reconstruction and determining the particle momentum by exploiting charged particle deflection in a magnetic field. In addition, the drift chambers contribute to particle identification by measuring the energy loss. The read-out concept foresees each sensing wire to be equipped with a preamplifier, analog pulse shaper and discriminator. In the current front-end electronics, the ASD-8 ASIC comprises the above modules. Due to limitations of the current on-board time to digital converters (TDC), especially regarding higher reaction rates expected at the future FAIR facility (HADES at SIS-100), the electronics need to be replaced by new board featuring multi-hit TDCs. Whereas ASD-8 chips cannot be procured anymore, a promising replacement candidate is the PASTTREC ASIC, developed by JU Krakow, which was tested w.r.t. suitability for MDC read-out in a variety of set-ups and, where possible, in direct comparison to ASD-8.
The timing precision, being the most crucial performance parameter of the joint system of detector and read-out electronics, was assessed in two different set-ups, i.e. a cosmic muon tracking set-up and a beam test at the COSY accelerator at Juelich using a minimum ionizing proton beam.
The beam test results were reproduced and can thus be quantitatively explained in a three dimensional GARFIELD simulation of a HADES MDC drift cell. In particular, the simulation is able to describe the characteristic dependence of the time precision on the track position within the cell.
A circuit simulation (SPICE) was used to closely model the time development of a raw drift chamber pulse, measured as a response to X-rays from a 55 Fe source. The insights gained from this model were used for attributing realistic charge values to the time over threshold values measured with the read-out ASICs in a charge calibration set-up. Furthermore, a high-level circuit simulation of the PASTTREC shaper is implemented to serve as a demonstration of the effect of the individual shaping and tail cancellation stages which are present in both ASICs.
The Compressed Baryonic Matter experiment (CBM) at FAIR and the NA61/SHINE experiment at CERN SPS aim to study the area of the QCD phase diagram at high net baryon densities and moderate temperatures using heavy-ion collisions. The FAIR and SPS accelerators cover energy ranges 2-11 and 13-150 GeV per nucleon respectively in laboratory frame for heavy ions up to Au and Pb. One of the key observables to study the properties of a matter created in such collisions is an anisotropic transverse flow of particles.
In this work, the performance of the CBM experiment for anisotropic flow measurements is studied with Monte-Carlo simulations using gold ions at SIS-100 energies employing different heavy-ion event generators. Also, procedures for centrality estimation and charged hadron identification are described and corresponding frameworks are developed.
The measurement of the reaction plane angle is performed with Projectile Spectator Detector (PSD), which is a hadron calorimeter located at a very forward angle. To prevent radiation damage by the high-intensity ion beam, the PSD has a hole in the center to let the beam pass through. Various combinations of CBM detector subsystems are used to investigate the possible systematic biases in flow and centrality measurements. Effects of detector azimuthal non uniformity and the PSD beam hole size on physics performance are studied. The resulting performance of CBM for flow measurements is demonstrated for identified charged hadron anisotropic flow as a function of rapidity and transverse momentum in different centrality classes.
The measurement techniques developed for CBM were also validated with the experimental data recently collected by the NA61/SHINE experiment at CERN SPS for Pb+Pb collisions at the beam momenta 30A GeV/c. Compared to the existing data from the NA49 experiment at the CERN SPS, the new data allows for a more precise measurement of anisotropic flow harmonics. The fixed target setup of NA61/SHINE also allows extending flow measurements available from the STAR at the RHIC beam energy scan (BES) program to a wide rapidity range up to the forward region where the projectile nucleon spectators appear. In this thesis, an analysis of the anisotropic flow harmonics in Pb+Pb collisions at beam momenta 30A GeV/c collected by the NA61/SHINE experiment in the year 2016 is presented. Flow coefficients are measured relative to the spectator plane estimated with the Projectile Spectators Detector (PSD). The flow coefficients are obtained as a function of rapidity and transverse momentum in different classes of collision centrality. The results are compared with the corresponding NA49 data and the measurements from the RHIC BES program.
Im Rahmen dieser Arbeit wurde die Messung von ψ(2S) Mesonen mit dem ALICE-Experiment am LHC untersucht. Das ψ(2S) gehört zur Familie der Charmonia und kann sowohl in Proton-Proton- als auch in Nukleon-Nukleon-Kollisionen erzeugt werden und ist daher ein wichiger Parameter in den Studien dieser. Die Rate, mit der ψ(2S) durch verschiedene Mechanismen erzeugt werden, liefert Informationen über den Ablauf der Kollision und ist ein hilfreicher Faktor bei der Suche nach dem Quark-Gluon Plasma. Da es sich beim ψ(2S) um ein Charmonium handelt, das in niedrigere Charmoniumzustände zerfallen kann, ist das Verständis des ψ(2S) ebenso für Studien anderer Charmonia, wie dem J/ψ(1S), relevant.
ω(782) und ϕ(1020) Mesonenproduktion durch Dielektronen in pp-Kollisionen bei √s = 7 TeV mit ALICE
(2013)
Die Niedrigmassendielektronen (Elektron-Positron Paare mit kleiner invarianten Masse) sind wichtige experimentelle Sonden, um die Eigenschaften des in ultra-relativistischen Schwerionenkollisionen erzeugten heißen und dichten Mediums zu untersuchen. Elektronen koppeln nicht an die starke Wechselwirkung, weshalb sie wichtige Informationen über die gesamten Kollisionsphasen geben. Die Zerfälle von ω(782) und ϕ(1020)-Mesonen in Dielektronen ermöglichen es, besonders wichtige Informationen über ihre In-Medium-Eigenschaften zu erhalten, da Proton-Proton (pp)-Kollisionen als mediumfreie Referenz angenommen werden. Außerdem sind pp-Kollisionen auch für sich genommen interessant, um die Teilchenproduktion im Energiebereich des LHC (Large Hadron Collider) zu untersuchen.
In dieser Analyse werden die Elektronen im mittleren Rapiditätsbereich von |η| < 0.8 mit ITS (Inner Tracking System), TPC (Time Projection Chamber) und TOF (Time of Flight) gemessen.
Die transversalen Impulsspektren der ω(782) und ϕ(1020)-Mesonen im e+e--Zerfallskanal in pp-Kollisionen bei p √s = 7 TeV werden gezeigt. Das transversale Impulsspektrum des ω(782)-Mesons im e+e--Zerfallskanal wird mit den pT-Spektren in den µ+µ--und in den π0π+π--Zerfallskanälen verglichen, während das pT-Spektrum vom ϕ(1020)-Meson im e+e--Zerfallskanal mit den pT-Spektren in µ+µ-- und K+K--Zerfallskanälen verglichen wird.
Construction and commissioning of a setup to study ageing phenomena in high rate gas detectors
(2014)
In high-rate heavy-ion experiments, gaseous detectors encounter big challenges in terms of degradation of their performance due to a phenomenon dubbed ageing. In this thesis, a setup for high precision ageing studies has been constructed and commissioned at the GSI detector laboratory. The main objective is the study of ageing phenomena evoked by materials used to build gaseous detectors for the Compressed Baryonic Matter (CBM) experiment at the future Facility for Antiproton and Ion Research (FAIR).
The precision of the measurement, e.g., of the gain of a gaseous detector, is a key element in ageing studies: it allows to perform the measurement at realistic rates in an acceptable time span. It is well known the accelerating ageing employing high intensity sources might produce misleading results. The primary objective is to build an apparatus which allows very accurate measurements and is thus sensitive to minute degradations in detector performance. The construction and commissioning of the
setup has been carried out in two steps. During the first step of this work, a simpler setup which already existed in the detector laboratory of GSI had been utilised to define all conditions related to ageing studies. The outcome of these studies defined the properties and characteristics that must be met to build and operate a new, sophisticated and precise setup. The already existing setup consisted of two identical Multi Wire Proportional Chambers (MWPCs), a gas mixing station, an 55Fe source, an x-ray generator, an outgassing box and stainless steel tubing. In a first step, the gain and electric field configuration of the MWPCs were simulated by a combination of a gas simulation (Magboltz) and electric field simulation program (Garfield). The performance and operating conditions of the chambers have been thoroughly characterised before utilising them in first preparatory ageing test. The main diagnostic parameter in ageing studies is the detector gain, thus it is mandatory for precise ageing studies to minimise the systematic and statistical variation of the pressure and temperature corrected gain. To achieve the required accuracy, several improvements of the chamber design and the gas system have been implemented. In addition, the temperature measurement has been optimised. During the preparatory tests, several ageing studies have been carried out. The ageing effect of seven materials and gases have been carried out during these tests: RTV-3145, Ar/CO2 gas, Durostone flushed with Ar/Isobutane gas, Vetronit G11, Vetronit G11 contaminated with Micro 3000 and Gerband 705. The results of these studies went into the design of the new sophisticated ageing setup. For example some tests revealed that there was, even after cleaning, a certain level of contamination with "ageing agents" in the existing setup, which made it imperative to ensure a very high level cleanness of all components during the construction of the setup. The curing period of some testing samples like glues or the gas flow rate were found to be very important factors that must be taken into account to obtain comparable results. Very important changes in the chamber design have been made, i.e., the aluminium-Kapton cathodes used in MWPCs have been replaced with multi-wire planes and the fibreglass housing of the chamber has been changed to metal. The second step started with building the new setup which was designed based on the findings from the first step. The new ageing setup consists of three MWPCs, two moving platforms, an 55Fe source, a copper-anode x-ray generator, two outgassing boxes, both flexible and rigid stainless steel tubes. Before fabrication of the chambers, simulations of their electric field and the gain have been done using Magboltz and Garfield programs. After that, the chambers were installed and tested. A 0.3% peak-to-peak residual variation of the corrected gain has been achieved. Finally, the complete setup has been operated with full functionality in no-ageing conditions during one week. This test revealed very stable gain in all three chambers. After that two materials (Gerban 705 and RTV-3145) have been inserted in the two outgassing boxes and tested. They revealed an ageing rate of about 0.3%/mC/cm and 3%/mC/cm respectively. The final test proves the stability and accuracy of the ageing measurements carried out with the ageing setup at the detector laboratory at GSI which is ready to conduct the envisaged systematic ageing studies.
Erwärmt man Eis, so brechen die Molekülbindungen auf und bei einer kritischen Temperatur von 0°C entsteht durch einen Phasenübergang flüssiges Wasser. Dies ist wohl bekannt und das Phasendiagramm, sowie die Anomalie von Wasser ein bekanntes Hilfsmittel in Physik und Chemie. Doch was passiert, wenn man Kernmaterie erhitzt? Kann diese auch verschiedene Aggregatzustände annehmen? Physiker erwarten, dass ab einer definierten kritischen Temperatur auch die Bindungen zwischen den kleinsten Teilchen unserer Materie, den Quarks, aufbrechen und das bis dahin bestehende Hadronengas in ein Quark-Gluon-Plasma übergeht. In Experimenten auf der ganzen Welt sollen die Eigenschaften des Quark-Gluon- Plasmas und der Phasenübergang der Materie untersucht werden. Daraus möchte man ein Phasendiagramm für die hadronische Materie entwickeln (Abb. 1). In verschiedenen Experimenten werden die unterschiedlichen Stationen des Phasendiagramms abgelaufen. Die laufenden Projekte an den großen Teilchenbeschleuniger Anlagen am LHC (Large Hadron Collider) am CERN (Conseil Européen pour la Abbildung 1: Das Phasendiagramm stark wechselwirkender Materie. Aufgetragen ist die Temperatur gegen die Baryonendichte. Der braune Bereich stellt den Übergangsbereich zwischen Hadronengas und Quark-Gluon-Plasma dar [ZAM]. Recherche Nucléaire) und am RHIC (Relativistic Heavy Ion Collider) in Brookhaven untersuchen das Phasendiagramm bei hohen Temperaturen und geringen Dichten. An der neuen, noch im Aufbau befindlichen Beschleunigeranlage FAIR (Facility for Antiproton and Ion Research) soll nun, im Rahmen des CBM-Experiment (Compressed Baryonic Matter), das Phasendiagramm bei hohen baryonischen Dichten und geringeren Temperaturen untersucht werden. Dafür werden spezielle Detektorkomplexe entwickelt. Diese werden benötigt, um herauszufinden, wann ein Quark-Gluon-Plasma vorliegt. Hierbei ist die Identifizierung von Elektronen von großer Bedeutung. Beim CBM-Experiment wird zur Unterscheidung zwischen Pionen und Elektronen unter anderem ein Transition Radiation Detektor (TRD) verwendet. (Kapitel 4) Dessen Eingangsfenster besteht aus einer dünnen Mylar®-Folie, welche empfindlich auf Druckschwankungen reagiert. Dies führt zu einer Veränderung des Kammervolumens, was zu einer Variation der Gasverstärkung und des daraus gewonnenen Signals führt. Die Auswirkungen von Druckschwankungen auf das Eingangsfenster des CBM-TRDs sollen in der folgenden Arbeit anhand von Simulationen (Kapitel 5) sowie anhand von Messungen (Kapitel 6) untersucht und verglichen werden. Zunächst wird jedoch ein Überblick der Grundlagen gegeben.
The last decades have brought tremendous progress in understanding the phase structure of the strongly interacting matter. This has been driven by studying heavy-ion collisions on the experimental side and Lattice QCD, functional approaches to QCD, perturbation theory and effective theories on the theoretical side. Of particular interest is the transition from hadrons to partonic degrees of freedom which is expected to occur at high temperatures or high baryon densities. These phases play an important role in the early universe and the core of neutron stars. Nowadays, the existence of a deconfined phase, i.e. Quark Gluon Plasma (QGP) and its phase transition at vanishing and small net-baryon densities, are well established. However, the situation at larger densities is less clear.
Complementary to the studies of matter at high temperatures and low net-baryon densities performed at RHIC and LHC, the proposed Compressed Baryonic Matter (CBM) experiment at the future FAIR facility, aims to explore the QCD phase diagram at very high baryon-net densities and moderate temperatures. The CBM research program includes the search for the deconfinement phase transition, the study of chiral symmetry restoration in super dense baryonic matter, the search for the critical endpoint, and the study of the nuclear equation of state at high densities. While other experiments (STAR-BES at BNL, BM@N at NICA) are suited to measure bulk observables, CBM is explicitly designed to access rare observables, such as multi-strange hadrons, dileptons, hypernuclei and charmonium. Therefore, a key feature of CBM is the very high interaction rate, exceeding those of contemporary and proposed nuclear collision experiments by several orders of magnitude. However, some of the rare probes have a complex signature, hidden in a background of several hundreds of charged tracks. This forbids a conventional, hardware-triggered readout; instead, the experiment combines self-triggered front-end electronics, fast and free-streaming data transport, online event reconstruction and online event selection.
The central detector for tracking and momentum determination of charged particles in the CBM experiment is the Silicon Tracking System (STS). It is designed to measure up to 700 charged particles in nucleus-nucleus collisions between 0.1 and 10 MHz interaction rate, to achieve a momentum resolution in 1 Tm dipole magnetic field better than 2%, and to be capable of identifying complex particle decays topologies, e.g., such with strangeness content. The STS comprises 8 tracking stations equipped with double-sided silicon microstrip sensors. Two million channels are read out with self-triggering electronics, matching the data streaming and on-line event analysis concept applied throughout the experiment. The detector’s functional building block consists of a silicon sensor, aluminum-kapton microcables and two front-end electronics boards integrated in a module. The custom-designed ASIC (STS-XYTER) implements the analog front-end, the digitizer and the generation of individual hit data for each signal.
Design of the front-end chip requires finding an optimal solution for time and input charge measurements with tight constraints: small area (58 μm channel pitch), low noise levels (below 1500 ENC(e− )), low power consumption (610 mW/channel), radiation hard architecture and speed requirements. Being a part of the first processing stage in the full readout and data acquisition chain, the characterization of the chip and its integration with the detector components is a crucial task. In this work, various methods and tools are established for testing and qualifying the ASIC analog front-end. A procedure for amplitude and timing calibration is developed using different functionalities of the chip. The procedure is optimized for our prototype system in order to achieve the best accuracy in the shortest amount of time. Results were verified using a gamma source and an external pulse generator, showing discrepancies below 5%.
Among the multiple operation requirements of the ASIC, the noise performance is of essential importance. The characterization of the chip noise is carried out as a function of a large number of parameters such as: low-voltage power regulators, input capacitance, shaping time, temperature and bond’s protective glue (glob-top). These studies allowed to optimize the ASIC configuration settings, to identify possible malfunctions in the low voltage powering scheme and to select possible glob-top materials to be used in the module assembly. Moreover, important differences are found among odd and even channels, which main cause was related to the bias scheme of the amplifiers of the two groups of channels. This effect has been corrected in the new version (v2.1) of the ASIC.
Despite the STS front-end electronics being located outside of the physics acceptance, they will be exposed to high fluxes of charged particles. Considering the SIS100 possible running scenario, the lifetime dose at the location of the electronics is expected not to exceed 800 krad. Consequently, the STS-XYTERv2 ASIC implements a radiation hard design based on dual-interlocked cells (DICE), and triple modular redundancy (TMR).
Multiple dedicated beam campaigns were carried out to evaluate the ASIC’s design in terms of immunity to single event upsets (SEU) errors and overall performance after a lifetime doses. The DICE cell SEU cross section was measured in a high-intensity proton beam. Result show a significant improvement of the SEU immunity in the STS-XYTERv2 compared to its predecessor, and allows to estimate the upset rate in the CBM running scenario, resulting in less than one SEU/ASIC/day.
The studies on the total ionizing dose (TID) show that the overall noise levels for the ASIC, at the end of the experiment lifetime, are expected to increase by approximately 40 – 60%. Moreover, they demonstrated that short periods of annealing at room temperature can favorably influence the noise performance of the chip.
The assembly and test of the STS modules, a complex process with multiple stages and a long learning curve, is illustrated in different parts of this work. The first prototype modules were built with the front-end board type B (FEBs-B), capable of reading out 128 channels for p and n side respectively. The studies were conducted with a relativistic proton beam of 1.7 GeV/c momentum at the COSY accelerator facility, Research Center Juelich, in March 2018. The campaign brought valuable insights to the development of an effective grounding and powering scheme for reading out the detectors. The signal-to-noise was measured for one of the prototype modules, resulting in values larger than 15 for both polarities. A deeper analysis into the collected data allowed the identification of a logic error in the ASIC that affected the readout rate and the quality of the data. This issue was corrected in the new version of the chip.
A precursor of the STS detector, named mini-STS (mSTS), has been built within the mCBM project carried out in FAIR Phase0. mSTS was built from 4 fully assembled detector modules. To ensure the proper operation of the ASICs that were used in the module assembly, it was required to develop a rigorous quality assurance procedure. A dedicated setup was built based on a custom designed pogo-pin station and a total of 339 chips were tested. More than 90% of good-quality and operational ASICs were obtained. In the mCBM beam campaign of March 2019, four detector modules were successfully operated in a close-to-final readout chain and valuable data were collected. The mSTS detector was exposed to the products of Ag+Au collisions at energies above 1.58 AGeV and overall interaction rates up to 106 , which resembles the real conditions of the CBM experiment.
Along this work, significant progress for the development of the STS detector modules was achieved. Techniques for characterization of the front-end electronics and the complete detector system were developed and worked out. They will be applied for QA of the components during the series production.
The main purpose of the Transition Radiation Detector (TRD) located in the central barrel of ALICE (A Large Ion Collider Experiment) is electron identification for separation from pions at momenta pt > 1 GeV/c, since in this momentum range the measurements of the specific energy loss (dE/dx) of the Time Projection Chamber (TPC) is no longer sufficient. Furthermore, it provides a fast trigger for high transverse momentum charged particles (pt > 3 GeV/c) and makes a significant contribution to the optimization of the tracking of reaction products in heavy-ion collisions. Its whole setup comprises 18 supermodules out of which 13 are presently operational and mounted cylindrically around the beam axis of the Large Hadron Collider (LHC). A supermodule contains either 30 or 24 chambers, each consisting of a radiator for transition radiation creation, a drift and an amplifying region followed by the read-out electronics. In total, the TRD is an array of 522 chambers operated with about 28 m3 of a Xe-CO2 [85-15%] gas mixture. During the work of this thesis, the testing, commissioning, operation and maintenance of detector parts, the gas system and its online quality monitor, improvements on the detector control user-interface and studies about a new pre-trigger module for data read-out have been accomplished. The TRD gas system mixes, distributes and circulates the operational gas mixture through the detector. Its overall optimization has been achieved by minimizing gas leakage, surveying, controlling, maintaining and continuously improving it as well as designing and carrying out upgrades. Gas quality monitors of the type \GOOFIE" (Gas prOportional cOunter For drIfting Electrons) can be used in gaseous detectors as on-line monitors of the electron drift velocity, gain and gas properties. One of these devices has been implemented within the TRD gas system, while another one surveys the gas of the TPC. Both devices had to be adapted to the specific needs of the detectors, were under constant surveillance and control, and needed to be further developed on both hardware and software side. To improve the operation of the TRD, modifications on its DCS software (Detector Control System) used for monitoring, controlling, operating, regulating and configuring of hardware and computing devices have been carried out. The DCS is designed to enable an operator to interact with equipment through user interfaces that display the information from the system. The main focus of this work was laid on the optimization of the usability and design of the user interface. The front-end electronics of the TRD require an early start signal (\pre-trigger") from the fast forward detectors or the Time-Of-Flight detector during the running periods. The realization of a new hardware concept for the read-out of the TRD pre-trigger system has been studied and first tests were performed. This new module called PIMDDL (Pre-trigger Interface Module Detector Data Link) is meant to acquire all data necessary to simulate and predict the full pre-trigger functionality, and to verify its proper operation. Furthermore, it shall provide all functionalities of the so-called Control Box Bottom as well as keep the functionalities of the already existing PIM (Pre-trigger Interface Module) in order to combine and replace these two modules in the future.
Die Struktur der uns umgebenden Materie sowie die zwischen ihren Bestandteilen wirkenden Kräfte waren schon immer eine der zentralen wissenschaftlichen Fragestellungen. Nach den gegenwärtigen Erkenntnissen ist die uns umgebende Materie aus einigen wenigen Elementarteilchen aufgebaut; sechs Quarks und sechs Leptonen. Zwischen ihnen wirken vier fundamentale Kräfte; die starke, die schwache, die elektromagnetische und die Gravitationskraft. Dominierende Kraft zwischen Quarks ist auf kleinen Skalen, wie im Inneren von Nukleonen, die starke Kraft. Die sie beschreibende Theorie ist die Quantum Chromo Dynamic (QCD). Eine besondere Eigenschaft der QCD ist die Vorhersage, dass Quarks nur in gebundenen Zuständen auftreten, entweder als Paar (Mesonen) oder als Kombination aus drei Quarks (Baryonen). Tatsächlich wurden bisher keine freien Quarks experimentell gefunden. Dieses Phänomen wird als "confinement" bezeichnet. Es stellt sich die Frage, ob es möglich ist, einen Materiezustand zu erzeugen in welchem sich die Quarks in einem ausgedehnten Volumen wie freieTeilchen verhalten. Tatsächlich sagen theoretische Berechnungen einen solchen Zustand, das Quark-Gluon-Plasma, für sehr hohe Temperaturen und/oder Dichten voraus. Ultrarelativistische Schwerionenkollisionen sind die einzige derzeit bekannte Möglichkeit, die nötigen Temperaturen und Dichten im Labor zu erreichen. Erschwert wird die Interpretation des hierbei erzeugten Materiezustandes durch die Tatsache, dass im Experiment nur der hadronische Endzustand der Kollision beobachtet werden kann, auf Grund der sehr kurzen Zeitskala jedoch nicht die erzeugte Materie selbst. Trotzdem wurden inzwischen einige Observablen gemessen, die einen Rückschluss auf den Materiezustand in den frühen Phasen der Kollision zulassen. Die kombinierte Information legt die Bildung eines "deconfinten" Zustandes nahe. Eine dieser Proben ist die Produktion von schweren Quarkonia, d.h. Mesonen, die aus charm-anticharm (bzw. bottom-antibottom) Quarkpaaren bestehen. Wie in Kapitel 2 näher erläutert, kann von ihrer Produktion möglicherweise auf die in der Kollision erreichte Temperatur geschlossen werden. Das bisherige experimentelle Programm konzentrierte sich auf die Messung des J/Ã Mesons, dem 1S Zustandes des charm - anticharm Systems. Wie von der Theorie vorhergesagt, wurde eine Unterdrückung seiner Produktion in Schwerionenkollisionen relativ zur Produktion in Proton-Proton-Kollisionen beobachtet, z.B. vom Experiment NA50 am SPS Beschleuniger des Europäischen Zentrums für Teilchenphysik CERN, wie in Abbildung 2.2 gezeigt.Die Deutung dieser Meßdaten ist jedoch umstritten. Neben einer Interpretation im Rahmen des oben beschriebenen Modells können die Daten sowohl von hadronischen Modellen als auch von statistischen Hadronisierungsmodellen, die eine Bildung des cc Zustandes nicht in den initialen Partonkollisionen, sondern erst beim Übergang zum hadronischen Endzustand annehmen, beschrieben werden. Eine Möglichkeit, einzelne Modelle zu falsifizieren bzw. einige der Modellparameter weiter einzuschränken, besteht in der Messung anderer Quarkonia Zustände als dem J/Ã Meson. Hier wären zum einen die anderen Zustände der cc Familie zu nennen, z.B. das Âc(1P). Dieses ist jedoch durch seine Zerfallskanäle experimentell nur schwer nachzuweisen. Eine andere Möglichkeit bietet die Messung von Bindungszuständen zwischen bottom Quarks. Das bb System hat durch die grössere Massendifferenz zwischen dem ersten Bindungszustand, dem (1S), und der für die Erzeugung zweier Hadronen mit jeweils einem bottom und einem leichten Quark, wesentlich mehr Zustände als das cc System. Experimentell sind durch den Zerfallskanal in zwei Leptonen insbesondere die Upsilon gut nachzuweisen.Die Messung von Upsilons in ultrarelativistischen Schwerionenkollisionen ist jedoch experimentell äusserst herausfordernd. Durch die große Masse von circa 10 GeV/c2 ist die Produktionswahrscheinlichkeit sehr klein im Vergleich zu leichteren Teilchen, zum Beispiel dem nur 3.14 GeV/2 schwerem J/Ã. Der im Jahr 2000 in Betrieb genommene Relativistic Heavy Ion Collider (RHIC, siehe Kapitel 3.1) des Brookhaven National Laboratories (BNL) auf Long Island in der Nähe vonNew York erreicht zum ersten Mal eine ausreichend grosse Schwerpunktsenergie und Luminosit ät, welche eine Upsilon Messung möglich erscheinen lassen. Die Entwicklung des experimentellen Programms zur Messung von Upsilons mit dem STAR Detektor am RHIC und erste Ergebnisse aus der Strahlzeit der Jahre 2003/2004 werden in dieser Arbeit beschrieben. Herzstück des STAR Detektors, der in Kapitel 3.2 näher beschrieben wird, ist eine Time Projection Chamber (TPC) welche die Rekonstruktion geladener Teilchen in einem grossen Phasenraumbereich bei mittlerer Rapidität erlaubt. In den Jahren 2001 bis 2005 wurde das Experiment um elektromagnetische Kalorimeter (BEMC, EEMC) erweitert, mit welchen zusätzlich die Energie von Photonen und Elektronen bestimmt werden kann. Die verschiedenen Detektoren des STAR Detektorsystems können in zwei, durch ihre mögliche Ausleserate definierte, Klassen eingeteilt werden. Ein Teil der Detektoren wird bei jedem RHIC Bunch Crossing ausgelesen, d.h. mit einer Frequenz von 9.3 MHz. Zu dieser Klasse der sogenannten Triggerdetektoren gehören unter anderem das schon erwähnte elektromagnetische Kalorimeter, der Central Trigger Barrel (CTB), die Zero Degree Calorimeter (ZDC) und die Beam-Beam Counter (BBC). Die Time Projection Chamber und einige andere Detektoren, wie z.B. der Silicon Vertex Tracker (SVT), können im Gegensatz dazu nur mit maximal 100 Hz ausgelesen werden.
According to the standard model of particle physics, the most fundamental building blocks of the known matter are quarks and leptons, while the interactions between these fundamental objects is mediated through bosons. On one hand the leptons can exist in nature as individual particles, while on the other hand quarks appear always as bound states called hadrons. The knowledge that hadrons are built from more fundamental particles dates back to the second half of the 20th century when the work by Gell-Mann and Zweig led to the development of the quark model. The experimental proof that the hadrons are bound objects composed of more elementary particles was done through the study of deep inelastic scattering of electrons off protons. These experiments were done in a similar fashion to the studies of the atomic model led by Rutherford at the beginning of the 20th century. Further experimental analysis led to the conclusion that a large fraction of the proton momentum is not carried alone by the quarks, but by the bosons that mediate the strong interaction called gluons. The cleanest experimental signature for the existence of the gluons came from electron-positron annihilation experiments, where a quark-antiquark pair is created and one of the quarks radiates a hard gluon. Due to confinement neither the quarks nor the gluon can be observed directly, but are measured experimentally as three collimated showers of particles named jets. Since the ground breaking experiments performed at DESY, jets have provided a tool to study the properties of quarks and gluons...
Die extrem hohen Interaktionsraten, die mit dem CBM Experiment verfügbar sein werden, erlauben die Messung von einigen der herausfordensten Observablen im Feld der Schwerionenphysik. Im besonderen die Messung von Dileptonen im mittleren Massenbereich ist nahezu unmöglich für eine Vielzahl anderer Experimente, da die extrem kleinen Wirkungsquerschnitte der Produktionskanäle das Auftreten eines messbaren Ereignisses so selten machen, so dass es nicht möglich ist eine ausreichende Anzahl dieser Ereignisse zu messen. Hinzu kommt, dass speziell im Energiebereich des CBM Experiments bisher absolut keine Messdaten verfügbar sind, obwohl es zahlreiche Hinweise von theoretischer Seite und von Messungen bei größeren Kollisionsenergien darauf gibt, dass wir im Energiebereich des CBM Experiments bedeutende Entdeckungen machen k¨onnten. Eine solche Messung dieser Observable könnte einen direkten Zugang zu Informationen bezüglich eines potentiellen Phasenubergangs von hadronischer Materie (bzw. im Hadronengas) in den Zustand eines Quark-Gluonen Plasmas liefern. Zusätzlich bieten Dileptonen noch die Möglichkeit Indikatoren für eine Wiederherstellung der chiralen Symmetrie zu messen...
Anisotropic collective flow of protons resulting from non-central heavy ion collisions is a unique hadronic observable providing information about the early stage of the nuclear collision. The analysis of collective flow in the energy regime between 1-2 AGeV enables the study of the phase diagram of hadronic matter at a high baryochemical potential µb, as well as the analysis of the equation of state at densities up to the threefold of the ground state density ρ0.
The algorithms of the standard event plane method and the scalar product method are used to analyse directed and elliptic flow of protons in a centrality range of 0-40 % most central events.
Prior to the analysis of experimental data, the respective influence of the reconstruction procedure on the algorithms is examined using Monte Carlo simulations based on the Ultra relativistic Quantum Molecular Dynamics (UrQMD) model.
Subsequently, experimental data measured in April 2012 with the High Acceptance DiElectron Spectrometer (HADES) is analysed using both methods. About 7.3 · 109 Au+Au events at a kinetic beam energy of 1.23 AGeV, equivalent to a centre of mass energy of √sNN = 2.42 GeV were recorded. A multi-differential analysis is feasible as the HADES detector provides a good transverse momentum and rapidity coverage.
Both algorithms result in identical values for directed and elliptic flow across all centrality classes within the observable phase space of protons. The calculated integrated value of v2 at mid rapidity is in good agreement with world data.
Electron identification with a likelihood method and measurements of di-electrons for the CBM-TRD
(2017)
In this work a likelihood method has been implemented and investigated as particle identification algorithm for the CBM-TRD.
The creation of the probability distributions for the likelihood method via V0-topologies seems to be feasible and the purity of the obtained samples is sufficient for the usage in the likelihood method.
The comparison between the ANN and the likelihood method shows no differences in the identification performance. The pion suppression factor reaches the same values for the same electron identification efficiencies and the yields of the resulting di-lepton signals are comparable. The signal-to-background ratios for both methods have the same values and show a value of about 10−2 in the invariant mass range of minv = 1.5 - 2.5 GeV/c2, which is expected to be sufficient to provide access to the thermal in-medium and QGP radiation.
The investigation of a detector system without a TRD shows no pion suppression for a momentum above p = 6 GeV/c. Therefore, the background contributions increase drastically and the signal-to-background ratio decreases at all invariant masses, but especially in the invariant mass range of minv = 1.5 - 2.5 GeV/c2.
The background contributions in the invariant mass range of minv = 1.5 - 2.5 GeV/c 2 are also influenced by the selected electron identification efficiency of the TRD, which significantly shifts the fraction of the eπ contributions relative to the total number of pairs.
In this thesis, the emission of protons as well as the production of Λ hyperons, Κ0S mesons and 3ΛH hypernuclei are analyzed multi-differentially as a function of transverse momentum, rapidity and centrality. Therefore, the 3.03 billion 30 % most central Ag(1.58A GeV)+Ag events recorded by HADES are used. Furthermore, the lifetimes of Λ hyperons, Κ0S mesons and 3ΛH hypernuclei are measured. The obtained 3ΛH lifetime of (253 ± 24 ± 42) ps is compatible with the lifetime of free Λ hyperons, as predicted by theoretic calculations due to its low binding energy. Finally, also the double strange Ξ– hyperons are reconstructed. Unfortunately, the fully optimized signals lie below the confidence threshold of 5σ, which is why both an production rate and an upper production limit are estimated using averaged acceptance and efficiency corrections. Never before, 3ΛH or Ξ– were successfully reconstructed and analyzed in heavy-ion collisions at such low energies. The obtained results are compared to previous measurements and put in context with world data form different energies and collision systems.
Ziel der Simulationsstudien in dieser Arbeit war es, die Leistungsfähigkeit des Transition Radiation Detectors zur Identifikation von leichten Kernen und Hyperkernen im CBM-Experiment zu untersuchen. Die Trennung von Helium und Deuterium
mithilfe ihres spezifischen Energieverlustes im TRD ist zentral, um eine Rekonstruktion des seltenen Hyperkerns 6 ΛΛHe mit einem hohen Signal-zu-Untergrund-Verhältnisse zu leisten. Zur Erfüllung der Anforderungen, die sich aus dem CBM-Forschungsprogramm ergeben, wird eine Auflösung des Energieverlustes dEdx von Helium von höchstens 30 % verlangt...
In April and May 2012 data on Au+Au collisions at beam energies of Ekin = 1.23A GeV were collected with the High Acceptance Di-Electron Spectrometer (HADES) at the GSI Helmholtzzentrum für Schwerionenforschung facility in Darmstadt, Germany. In this thesis, the production of deuterons in this collision system is investigated.
A total number of 2.1 × 109 Au+Au events is selected, containing the most central 0-40% of events. After particle identification, based on a mass determination via time-of-flight and momentum and on a measurement of the energy loss, the transverse mass spectra of the deuteron candidates are extracted for various rapidities and subsequently corrected for acceptance and efficiency.
The inverse slope parameter of a Boltzmann fit applied to the transverse mass spectra at midrapidity, which is referred to as the effective temperature, is extracted. For a static thermal source, this parameter corresponds to the kinetic freeze-out temperature Tkin and is therefore expected to be smaller or equal to the chemical freeze-out temperature Tchem. The extracted effective temperature of Tef f = (190 ± 10) MeV however exceeds the chemical freeze-out temperature that was obtained by a statistical model fit to different particle yields. The effective temperatures of various particle species, obtained in previous analyses, suggest a systematic rise with increasing particle mass, which is confirmed by the deuteron results.
An explanation can be the influence of a collective expansion with a radial expansion velocity βr. By fitting a Siemens-Rasmussen function to the transverse mass spectra, the global temperature of T = (100 ± 8) MeV and radial expansion velocity βr = 0.37 ± 0.01 are obtained. This temperature is still very high and only takes into account the production of deuteron nuclei.
The simultaneous fit of a blast-wave function to the transverse mass spectra of deuterons and other particles, as obtained by previous analyses, considers a velocity profile for the radial expansion velocity and takes into account the production of various particle species. The resulting global temperature Tkin = (68 ± 1) MeV and average transverse expansion velocity hβri = 0.341 ± 0.003 are within the expected range for the collision energy.
The Siemens-Rasmussen fits are also used to extrapolate the transverse mass spectra into unmeasured regions, to integrate them and obtain a rapidity-dependent count rate. This count rate exhibits a thermal shape for central events and shows increasing spectator contributions for more peripheral events.
The invariant yield spectra of the deuterons are compared to those of protons, as obtained by a previous analysis, in the context of a nucleon coalescence model. The hereby extracted nucleon coalescence factor B2 = (4.6 ± 0.1) × 10−3 agrees with the expected result for the beam energy that was studied.
In dieser Arbeit wurde zunächst schrittweise das Vorgehen beim Bau der TRD Prototypkammern , sowie die Maßnahmen zur Verbesserung der Kammerstabilität erklärt, um sicherzustellen, dass die erhobenen Messdaten zuverlässig sind. Es ist an dieser Stelle nochmals hervorzuheben, dass bereits kleine Veränderungen in der Bauweise einen großen Einfluss auf die Kammerstabilität haben.
Es wurde mit der Kammer 3 der Anodenstrom, die deponierte Photonenenergie und die Clusterrate gemessen. Anschließend wurden diese Daten ausgewertet und aus den Ergebnissen die Gasverstärkung berechnet. Die Auswertung bestätigt, dass die Kammer im Proportionalbereich betrieben wurde. Nach dem Vergleich der Gasverstärkungsfaktoren der Messung mit den simulierten Werten, zeigt sich dass die Messungen stärker als erwartet von den simulierten Werten abweichen.
Für weitere, genauere Aussagen wäre es interessant die Ergebnisse dieser Arbeit durch modifizierte Messungen zu uberprüfen. Dabei könnte der Einfluss verschiedener Gasdrucke innerhalb und außerhalb der Kammer sowie die Variation der Raumtemperatur auf die Gasverstärkung explizit untersucht werden. Außerdem wäre es von großem Interesse, Messungen mit verschiedenen Ar und CO2 und Xe und CO2 Mischverhältnissen durchzuführen, da der TRD im CBM Experiment mit Xe und CO2 betrieben werden soll, und der Gasverstärkungsfaktor ausschlaggebend für die angelegte Anodenspannung im laufenden Betrieb sein wird.
In dieser Arbeit wurde der spezifische Energieverlust im TOF Detektor genutzt, um leichte Kerne zu identifizieren. Da die gemeinsame Betrachtung aller Szintillatorstäbe bei der aktuellen Kalibrierung des TOF Detektors keine eindeutige Zuordnung ermöglicht, wurde der Energieverlust der einzelnen Stäbe individuell parametrisiert. So konnten Helium und sogar Lithium Kerne selektiert werden. Die Impulskorrektur hat für zweifach geladene Kerne, abgesehen von sehr hohen Impulsen, eine erfolgreiche Korrektur der Masse ermöglicht. Bei Lithium hingegen wurde der Impuls überkorrigiert, sodass die Masse zu niedrig rekonstruiert wurde.
Durch Optimierung der Impulskorrektur könnte zusammen mit einer verbesserten Kalibrierung des TOF Detektors ein sehr hohes Auflösungsvermögen erreicht werden. Daher sollte die systematische Impulskorrektur für hohe Impulse durch weitere Simulationen verbessert und der Energieverlust vor dem Auftreffen auf den META Detektor genauer untersucht werden. Optimalerweise würde zur Kalibrierung des TOF Detektors die Abhängigkeit des Energieverlustes vom Winkel, in welchem die Teilchen auf den Detektor treffen, berücksichtigt werden. Ziel ist es, alle Stäbe pro zurückgelegter Wegstrecke zu kalibrieren, sodass weder ein Unterschied durch den Einfallwinkel der Teilchen noch durch die verschiedenen Stablängen aufkommt. Folglich wäre eine sehr spezifische Teilchenselektion möglich.
Ziel dieser Arbeit war die Untersuchung eines neuen Prototypen für den Übergangsstrahlungsdetektor im zukünftigen CBM-Experiment. Da der TRD zur Untersuchung des Quark-Gluon-Plasmas im Bereich hoher Baryonendichten bei hohen Kollisionsraten besonders schnell sein muss, wurde ein Prototyp mit einem kleinen Gasvolumen ohne Driftbereich entwickelt. Die Geometrie ist jedoch mit einer Reduzierung der Stabilität der Gasverstärkung verbunden, denn das elektrische Feld in der Kammer ist bei den geringen Abständen von Verformungen des dünnen Kathodenfensters abhängig. Daher wurde eine vielversprechende, veränderte Drahtgeometrie eingeführt: zwischen den Anodendrähten wurden zusätzliche Felddrähte positioniert, um das elektrische Feld im Bereich der Gasverstärkung zu stabilisieren.
Der neue Prototyp mit alternierender Hochspanngung und mit einer Dicke von 8 mm sowie einer aktiven Fläche von 15 x 15 cm2 wurde im Labor mit einer 55Fe-Quelle getestet.
Dazu wurden Strommessungen und eine spektrale Analyse für 25 verschiedene Positionen der Quelle vor der Kammer durchgeführt, sowohl mit der neuen Kammer als auch mit einer Standardkammer als Referenz. Die mit der neuen Kammer verbundenen positiven Erwartungen konnten durchweg bestätigt werden. Sowohl für die Strom- als auch für Energiemessung konnte eine signifikante Verbesserung der Stabilität der Gasverstärkung festgestellt werden. Variationen von über 60 % über die verschiedenen Messpunkte für die Standardkammer konnten mit der Kammer mit alternierender Hochspannung auf unter 15 % reduziert werden. Auch bei einer Variation des differentiellen Drucks, der mit der Ausdehnung des Folienfensters verbunden ist, kann das elektrische Feldes mithilfe der Felddrähte stabilisiert werden. Ebenso kann eine Analyse der Energieauflösung für die mit den Prototypen aufgezeichneten Spektren den stabilisierenden Effekt bestätigen. Eine zusätzliche Verbesserung durch das Anlegen einer negativen Spannung an den Felddrähten konnte allerdings nicht beobachtet werden. Ebenso zeigten die Messungen mit einer zweiten Kammer mit asymmetrischer Geometrie, das heißt die Drahtebene wurde in Richtung der hinteren Kathode verschoben, keine weitere Stabilisierung. Messungen der an den Felddrähten influenzierten Ströme zeigen, dass diese etwa bei einem Drittel der Anodenströme liegen, wobei sie für eine Erhöhung der Felddrahtspannung ebenso wie für die Messung mit der asymmetrischen Kammer leicht ansteigen. Die Ströme an den Felddrähten sind mit der Bewegung der Ionen in der Kammer verbunden, die das elektrische Feld stören können. Durch die Einführung der Felddrähte wird sich ein Teil der Ionen zu diesen bewegen, anstelle den Weg durch die Kammer bis zu den Kathoden zurückzulegen.
Die positiven Ergebnisse für die Kammer mit alternierenden Drähten sind nun Ausgangspunkt für weitere Schritte. Größere Kammern mit einer Fläche von 60 x 60 cm2, wie sie auch im finalen Experiment eingesetzt werden, wurden bereits gebaut und in einem gemischten Elektron-Pion-Strahl am PS (Protonsynchrotron) und mit einem Bleitarget am SPS (Super-Proton Synchrotron) am CERN getestet. Dabei wurde die Dicke des Gasvolumens nochmals – auf 7 mm – reduziert, was die Schnelligkeit des Detektors weiter erhöht, allerdings auch die Stabilität der Gasverstärkung wieder auf die Probe stellt. Die Daten werden derzeit ausgewertet. Eine weitere Analyse auf Basis der Padauslese im Labor ist in Planung. Hierbei ist insbesondere die Verteilung eines Signals über die Pads (Pad-Response-Funktion) von Bedeutung, wobei diese von der Bewegung der Ionen und damit von der Geometrie des elektrischen Feldes beeinflusst wird. Die Einführung der Felddrähte spielt hier eine wesentliche Rolle; insbesondere beträgt der Drahtabständ zwischen den Andodendrähten nun 5 mm, während die Abstände bei den vorhergehenden Generationen bei 2-3 mm lagen.
Auch die Signalform ist von Interesse. Die derzeit ebenfalls in Entwicklung befindliche Ausleseelektronik und die Algorithmen zur Datenverarbeitung sind auf die bekannte Signalform eines Standardprototypen ausgerichtet. Eine veränderte Form müsste entsprechend berücksichtigt werden, um aussagekräftige Ergebnisse zu erhalten. Die Auswertungen in dieser Arbeit zeigen, dass sich die Signalform grundsätzlich nicht von der des Standardprototypen unterscheidet. Wichtig sind auch die Driftzeiten für Elektronen aus der Lawine. Sie spielen eine entscheidende Rolle für die die Schnelligkeit des Detektors. Mit der Einführung der Felddrähte liegen sie zwar zum großen Teil nach wie vor im Bereich eines Standardprototyen mit entsprechender Dicke des Gasvolumens von 8 mm bei bis zu 150 ns, jedoch folgt dann ein sehr langsamer Abfall mit Elektrondriftzeiten von bis zu 450 ns [47]. Eine Verbesserung ist durch ein kleineres Gasvolumen möglich, für einen Anoden-Kathoden-Abstand von 3 mm sinken die maximalen Driftzeiten auf 300 ns. Eine andere Alternative ist das Anlegen einer negativen Spannung an das Eintrittsfenster.
Das CBM Experiment konzentriert sich auf die Untersuchung des Phasendiagramms von stark wechselwirkender Materie im Bereich moderater Temperaturen, aber hoher Netto-Baryonendichte. Dabei sollen unter anderem Proben aus dem frühen und hochdichten Stadium des Quark-Gluon Plasmas detektiert werden. Ein Beispiel dafür ist das J/ψ-Meson. Das Vektormeson gilt wegen seiner Eigenschaften und Interaktion mit dem QGP als eine der wichtigen Proben stark wechselwirkender Materie.
In dieser Arbeit wird die Performance der Detektoren anhand einer Simulation in Hinsicht auf die Messung des J/ψ-Mesons studiert. Es werden hierfür unterschiedliche Simulationsansätze verglichen. Die Simulation wird im FairRoot und CbmRoot Framework durchgeführt. Es werden Proton+Gold Kollisionen bei einer Strahlenergie von 30 GeV pro Proton simuliert. Dabei verwenden wir das Standard-Setup des SIS100 für Elektronen. Das J/ψ-Meson wird über den e+e−-Zerfallskanal rekonstruiert. Bei der J/ψ-Rekonstruktion werden zuerst Schnitte gesetzt, mit der ein großer Teil der Teilchenspuren, die nicht aus J/ψ-Zerfällen stammen, aussortiert werden und so der Untergrund verringert wird.
Die Effizienz für Elektronen im Detektor-Setup RICH+TRD+TOF beträgt 65 Prozent. Für das J/ψ-Meson erhalten wir mit den gleichen Detektoren eine Effizienz von 25 Prozent. Das invariante Massenspektrum, das wir aus einer Simulation mit 8,5 Millionen Ereignisse bilden, zeigt uns, dass der hauptsächliche Anteil des Untergrunds aus Pion-Elektron-Kombinationen besteht. Es folgen im e+e−-Zerfallskanal unkorrelierte Elektron-Positron-Kombinationen als der zweitgrößte Beitrag zum Untergrund. Die Statistik ist bei der Full Simulation zu gering, um das J/ψ-Signal extrahieren zu können. Eine Integration liefert uns ein J/ψ Signal von 0,021 bei 8,5 Millionen Ereignisse, d.h. für die Detektion eines J/ψ-Mesons werden ca. 1010 Ereignisse benötigt.
Die Fast Simulation Methode ermöglicht uns in kürzerer Zeit eine größere Menge an Ereignissen zu simulieren. Dazu werden Information aus der Full Simulation entnommen, die als Antwort-Funktionen bezeichnet werden. Die Antwort-Funktionen werden der Fast Simulation übergeben, um so zeitintensive Prozesse in der Simulation überspringen zu können. Zum Zeitpunkt der Arbeit fehlen Pionen, Protonen und Kaonen in den invarianten Massenspektren der Fast Simulation. Das Problem soll in Zukunft behoben werden. Folglich haben wir ein invariantes Massenspektrum mit 85 Millionen simulierten Ereignissen, jedoch ohne Pionen, Protonen und Kaonen. Wir erhalten daher ein signifikantes J/ψ-Signal, allerdings mit einem unrealistisch hohen S/B-Verhältnis. Ein weiteres Ziel, nach der Implementierung der fehlenden Teilchen, soll die nochmalige Extrahierung des J/ψ-Signals mit korrektem Untergrund sein.
Next-generation DIRC detectors, like the PANDA Barrel DIRC, with improved optical designs and better spatial and timing resolution, require correspondingly advanced reconstruction and PID methods. The investigation of the PID performance of two DIRC counters and the evaluation of the reconstruction and PID algorithms form the core of this thesis. Several reconstruction and PID approaches were developed, optimized, and tested using hadronic beam particles, experimental physics events, and Geant simulations. The near-final design of the PANDA Barrel DIRC was evaluated with a prototype in the T9 beamline at CERN in 2018. The analysis finds excellent agreement between the experimental data and the Geant simulations for all reconstruction algorithms. The best PID performance of up to $5.2 \pm 0.2$ s.d. $\pi$/K separation at 3.5 GeV/c, was obtained with a time imaging PID method. The PANDA Barrel DIRC simulation, as well as the reconstruction and PID algorithms, were evaluated using experimental data from the GlueX DIRC as part of the FAIR Phase-0 program. The performance validation was carried out using physics events of the GlueX experiment and simulations. The initial analysis results of the commissioning dataset show a $\pi$/K separation power of up to 3 s.d. at a momentum of 3.0-3.5 GeV/c, obtained using a geometric reconstruction algorithm.
This work focuses on the investigation of K+, K- and ϕ-meson production in Ag(1.58 A GeV)+Ag collisions. The energetically cheapest channel for direct K+ production in binary NN-collisions NN→NΛK+ lies at exactly this energy. For the remaining K- and ϕ-mesons, an excess energy of 0.31 GeV and 0.34 GeV in the centre of mass system has to be provided by the system. This makes these particles an excellent probe for effects inside the medium.
K+ and K- mesons can be reconstructed directly as they possess a cτ of approximately 3.7 m. Using the approximately 3 billion recorded Ag(1.58 A GeV)+Ag 0-30% most central collision events, all reconstructed K+ and K- within the detector acceptance are investigated for their kinematic properties and their particle production rates compared to a selection of existing models.
Das Experiment ALICE (A Large Ion Collider Experiment) am CERN (Conseil Européen pour la Recherche Nucléaire) LHC (Large Hadron Collider) fokussiert sich auf die Untersuchung stark wechselwirkender Materie unter extremen Bedingungen. Solche Bedingungen existierten wenige Mikrosekunden nach dem Urknall, als die Temperaturen so hoch waren, dass Partonen (Quarks und Gluonen) nicht zu farbneutralen Hadronen gebunden waren. In solch einem Quark-Gluon-Plasma können sich die Partonen frei bewegen, wobei sie allerdings mit anderen Partonen aus dem Medium stark wechselwirken. Am LHC werden Bleikerne auf ultra-relativistische Energien von bis zu 2.68 TeV beschleunigt und zur Kollision gebracht, wobei für weniger als 10 fm/c ein QGP entsteht, das schnell expandiert. Die Partonen hadronisieren, wenn das QGP sich auf Temperaturen von weniger als der Phasenübergangstemperatur von ≈155MeV abkühlt. Die finalen Teilchen- und Impulsverteilungen werden werden vom ALICE Detektor gemessen und geben Aufschluss auf elementare Prozesse im QGP.
Die TPC (Time Projection Chamber ) ist eines der wichtigsten Detektorsysteme von ALICE. Sie trägt maßgeblich zur Rekonstruktion von Teilchenspuren und zur Identifikation der Teilchensorten bei mittleren Rapiditäten bei. Die TPC ist eine große zylindrische Spurendriftkammer und besteht aus einem 88mˆ3 großen Gasvolumen, das von der zentralen Hochspannungselektrode in zwei Seiten geteilt wird. Durchquert ein Teilchen das Gasvolumen, ionisiert es entlang seiner Spur eine spezifische Menge von Gasatomen. Die Ionisationselektronen driften entlang des extrem homogenen elektrischen Feldes zu den Auslesekammern an den Endkappen auf beiden Seiten der TPC. Die Messung der Position und der Menge der Ionisationselektronen erlaubt die Rekonstruktion der Teilchenspur sowie, in Kombination mit der Impulsmessungen über die Krümmung der Teilchenspur im Magnetfeld, die Bestimmung der Teilchensorte über den spezifischen Energieverlust pro Wegstrecke im Gas. Das Gasvolumen der TPC war in LHC Run 1 (2010–2013) mit Ne-CO_2 (90-10) gefüllt. Die Gasmischung wurde zu Ar-CO_2 (88-12) für Run 2 (2015–2018) geändert. Als Auslesekammern wurden Vieldrahtproportionalkammern verwendet, die aus einer segmentierten Ausleseebene, einer Anodendrahtebene, einer Kathodendrahtebene und einem Gating-Grid (GG) bestehen. Das GG is eine zusätzliche Drahtebene, die durch zwei verschiedene Spannungseinstellungen transparent oder undurchlässig für Elektronen und positive Ionen geschaltet werden kann.
In den ersten Daten von Run 2 bei hohen Interaktionsraten wurden große Verzerrungen der gemessenen Spurpunkte beobachtet, die auf Grund von Verzerrungen des Driftfeldes auftreten und nicht von Daten aus Run 1 bekannt waren. Diese Verzerrungen treten nur sehr lokal an den Grenzen von manchen der inneren Auslesekammern (IROCs) auf. Zudem wurden auch große Verzerrungen in einer (C06) der äußeren Auslesekammern (OROCs) festgestellt, die sich bei einem bestimmten Radius über die ganze Breite der Kammer erstrecken. Die Ergebnisse dieser Arbeit befassen sich mit der Untersuchung jener Verzerrungen und ihrer Ursache, sowie mit der Entwicklung von Strategien um die Verzerrungen zu minimieren.
Messungen der Verzerrungen in den IROCs und Vergleiche mit Simulationen lassen darauf schließen, dass die Verzerrungen von positiver Raumladung hervorgerufen werden, die durch Gasverstärkung an sehr begrenzten Regionen der Auslesekammern entsteht und sich durch das Driftvolumen bewegt. Es werden charakteristische Abhängigkeiten von der Interaktionsrate sowie systematische Veränderungen bei Umkehrung der Orientierung des Magnetfeldes gemessen. Eine erneute Analyse von Run 1 Daten mit den Methoden aus Run 2 zeigt, dass die Verzerrungen bereits in Run 1 auftraten, jedoch durch die Ne-Gasmischung und niedrigere Interaktionsraten um eine Größenordnung kleiner waren. Neue Daten aus Run 2, für die die Gasmischung zeitweise wieder von Ar-CO_2 zu Ne-CO_2- N_2 geändert wurde, bestätigen die Ergebnisse der Run 1 Datenanalyse. Der Ursprung der Raumladung wird systematisch eingegrenzt. Es werden einzelne IROCs identifiziert, an deren Anodendrähten die Raumladung entsteht. Physikalische Modelle ermöglichen es, die Entstehung der Raumladung auf das Volumen zurückzuführen, das sich zwischen zwei IROCs befindet. Damit besteht die Vermutung, dass einzelne Spitzen von Anodendrähten am äußeren Rand dieser IROCs in das Gasvolumen hineinragen und somit hohe elektrische Felder erzeugen, an denen Gasverstärkung stattfindet. Die positiven Ionen können dann ungehindert in das Driftvolumen gelangen. Um diesen Effekt zu unterdrücken, wird das Potential der Cover-Elektroden angepasst, die sich auf den Befestigungsvorrichtungen der Drahtebenen an den Kammerrändern befinden. Dadurch kann die Menge von Ionisationselektronen, die in das Volumen zwischen zwei IROCs hineindriftet und vervielfacht wird, eingeschränkt werden. Über elektro-statische Simulationen und Messungen wird eine Einstellung für das Cover-Elektroden-Potential gefunden, mit der die Verzerrungen auf 30 % reduziert werden können. Die Verzerrungen in OROC C06 entstehen durch positive Ionen, die aus der Verstärkungsregion in das Driftvolumen gelangen, da an dieser bestimmten Stelle zwei aufeinanderfolgende GG-Drähte den Kontakt verloren haben. Die Verzerrungen werden um mehr als einen Faktor 3 reduziert, indem die Hochspannung der Anodendrähte um 50 V und somit der Gasverstärkungsfaktor um einen Faktor 2 verringert wird und indem das Potential der noch funktionierenden GG-Drähte erhöht wird.
Zusammenfassend konnten die lokalen Raumladungsverzerrungen für die letzte Pb−Pb Strahlzeit von Run 2 auf weniger als 1cm bei den höchsten Interaktionsraten verringert werden. Zudem wurde der Anteil des von Raumladungsverzerrungen betroffenen Volumens der TPC signifikant verringert, sodass die ursprüngliche Auflösung der Spurrekonstruktion wieder erreicht werden konnte.
In dieser Arbeit wurde die Messung des Flusses von Protonen in Silber-Silber-Kollisionen bei 1:58 AGeV beschrieben. Dabei wurden drei verschiedene Flow Koeffzienten betrachtet, der gerichtete, der elliptische sowie der dreieckige Fluss.
Nachdem die Protonen zunächst anhand ihrer Masse identifziert wurden, wurde die Reaktionsebene rekonstruiert. Nachfolgend wurde das Vorgehen zur Bestimmmung der ersten drei Flow-Koeffzienten v1, v2 und v3 beschrieben. Diese wurden anschließend in Abhäangigkeit des Transversalimpulses und der Rapidität für vier Zentralitätsklassen im Bereich von 0 - 40% Zentralität dargestellt.
Da die Daten ebenfalls Silber-Kohlenstoff Reaktionen enthalten, weisen die Spektren eine Abweichung vom erwarteten Verlauf auf. Daher wurden diese Reaktionen anhand des in Abschnitt 3.1 beschriebenen Energieverhältnisses ERAT abgeschätzt und mit Hilfe eines Cut-Off Werts ausgeschlossen. Die daraus resultierenden Spektren konnten dadurch verbessert werden.
Im Fall der Gold-Gold Strahlzeit aus dem Jahr 2012 konnten neben Daten der hier diskutierten Flow-Koeffzienten v1, v2 und v3 ebenfalls Koeffzienten höherer Ordnung, v4 und v5, sowie Hinweise auf ein Auftreten von v6 gefunden werden.
Ähnliche Analysen könnten im Fall der Daten der Silber-Silber Kollisionen durchgeführt werden. Hier tritt zwar ein quantitativ kleinerer Fluss auf, da es sich bei den kollidierenden Nuklei um ein kleineres System handelt, jedoch treten im Vergleich zu Gold-Gold Kollisionen etwa zweifach so hohe Event-Raten auf. Somit kann mit der in dieser Arbeit beschriebenen Herangehensweise unter Verwendung der Daten der gesamten Strahlzeit untersucht werden, ob Hinweise auf Flow-Koeffzienten höherer Ordnung zu finden sind.
Außerdem sollte bei den bestehenden Ergebnissen eine Korrektur des Effekts der Occupancy des Detektors durchgeführt werden, da dieser wie in Abschnitt 3.2.1 beschrieben zu Verfälschungen des gemessenen Flusses führt. Dieser Effekt wird insbesondere im Fall des gerichteten Flusses v1 deutlich.
Des Weiteren ist eine Abschätzung der systematischen Fehler der Messungen erforderlich.
Dafür kann untersucht werden, welche Auswahlkriterien und Parameter die Messung beeinflussen, beispielsweise die Spurrekonstruktion und -selektion oder die Teilchenidentifikation. Unter Betrachtung der Auswirkungen auf die Ergebnisse der Flow-Koeffzienten kann die Analyse daraufhin mit Variationen dieser Werte durchgeführt werden. Somit kann der Bereich der systematischen Fehler abgeschätzt werden.
In this thesis, the flow coefficients vn of the orders n = 1 − 6 are studied for protons and light nuclei in Au+Au collisions at Ebeam = 1.23 AGeV, equivalent to a center-of-mass energy in the nucleon-nucleon system of √sNN = 2.4 GeV. The detailed multi-differential measurement is performed with the HADES experiment at SIS18/GSI. HADES, with its large acceptance, covering almost full azimuth angle, combined with its high mass-resolution and good particle-identification capability, is well equipped to study the azimuthal flow pattern not only for protons, deuterons, and tritons but also for charged pions, kaons, the φ-mesons, electrons/positrons, as well as light nuclei like helions and alphas. The high statistics of more than seven billion Au-Au collisions recorded in April/May 2012 with HADES enables for the first time the measurement of higher order flow coefficients up to the 6th harmonic. Since the Fourier coefficient of 7th and 8th order are beyond the statistical significance only an upper bound is given. The Au+Au collision system is the largest reaction system with the highest particle multiplicities, which was measured so far with HADES. A dedicated correction method for the flow measurement had to be developed to cope with the reconstruction in-efficiencies due to occupancies of the detector system. The systematical bias of the flow measurement is studied and several sources of uncertainties identified, which mainly arise from the quality selection criteria applied to the analyzed tracks, the correction procedure for reconstruction inefficiencies, the procedures for particle identification (PID) and the effects of an azimuthally non-uniform detector acceptance. The systematic point-to-point uncertainties are determined separately for each particle type (proton, deuteron and triton), the order of the flow harmonics vn, and the centrality class. Further, the validity of the results is inspected in the range of their evaluated systematic uncertainties with several consistency checks. In order to enable meaningful comparisons between experimental observations and predictions of theoretical models, the classification of events should be well defined and in sufficiently narrow intervals of impact parameter. Part of this work included the implementation of the procedure to determine the centrality and orientation of the reaction.
In the conclusion the experimental results are discussed, including various scaling properties of the flow harmonics. It is found that the ratio v4/v2 for protons and light nuclei (deuterons and tritons) at midrapidity for all centrality classes approaches values close to 0.5 at high transverse momenta, which was suggested to be indicative for an ideal hydrodynamic behaviour. A remarkable scaling is observed in the pt dependence of v2 (v4) at mid-rapidity of the three hydrogen isotopes, when dividing by their nuclear mass number A (A^2) and pt by A. This is consistent with naive expectations from nucleon coalescence, butraises the question whether this mass ordering can also be explained by a hydrodynamical-inspired approach, like the blast-wave model. The relation of v2 and v4 to the shape of the initial eccentricity of the collision system is studied. It is found that v2 is independent of centrality for all three particle species after dividing it by the averaged second order participant eccentricity v2/⟨ε2⟩. A similar scaling is shown for v4 after division by ⟨ε2⟩^2.