Refine
Year of publication
Document Type
- Doctoral Thesis (23)
- Bachelor Thesis (14)
- Master's Thesis (12)
Has Fulltext
- yes (49)
Is part of the Bibliography
- no (49)
Keywords
- HADES (3)
- ALICE (2)
- Flow (2)
- ALICE <Teilchendetektor> (1)
- ALICE upgrade (1)
- ALICE, Teilchendetektor (1)
- Ageing (1)
- Blei (1)
- CBM (1)
- CBM experiment (1)
Institute
- Physik (49)
This work focuses on the investigation of K+, K- and ϕ-meson production in Ag(1.58 A GeV)+Ag collisions. The energetically cheapest channel for direct K+ production in binary NN-collisions NN→NΛK+ lies at exactly this energy. For the remaining K- and ϕ-mesons, an excess energy of 0.31 GeV and 0.34 GeV in the centre of mass system has to be provided by the system. This makes these particles an excellent probe for effects inside the medium.
K+ and K- mesons can be reconstructed directly as they possess a cτ of approximately 3.7 m. Using the approximately 3 billion recorded Ag(1.58 A GeV)+Ag 0-30% most central collision events, all reconstructed K+ and K- within the detector acceptance are investigated for their kinematic properties and their particle production rates compared to a selection of existing models.
Das Experiment ALICE (A Large Ion Collider Experiment) am CERN (Conseil Européen pour la Recherche Nucléaire) LHC (Large Hadron Collider) fokussiert sich auf die Untersuchung stark wechselwirkender Materie unter extremen Bedingungen. Solche Bedingungen existierten wenige Mikrosekunden nach dem Urknall, als die Temperaturen so hoch waren, dass Partonen (Quarks und Gluonen) nicht zu farbneutralen Hadronen gebunden waren. In solch einem Quark-Gluon-Plasma können sich die Partonen frei bewegen, wobei sie allerdings mit anderen Partonen aus dem Medium stark wechselwirken. Am LHC werden Bleikerne auf ultra-relativistische Energien von bis zu 2.68 TeV beschleunigt und zur Kollision gebracht, wobei für weniger als 10 fm/c ein QGP entsteht, das schnell expandiert. Die Partonen hadronisieren, wenn das QGP sich auf Temperaturen von weniger als der Phasenübergangstemperatur von ≈155MeV abkühlt. Die finalen Teilchen- und Impulsverteilungen werden werden vom ALICE Detektor gemessen und geben Aufschluss auf elementare Prozesse im QGP.
Die TPC (Time Projection Chamber ) ist eines der wichtigsten Detektorsysteme von ALICE. Sie trägt maßgeblich zur Rekonstruktion von Teilchenspuren und zur Identifikation der Teilchensorten bei mittleren Rapiditäten bei. Die TPC ist eine große zylindrische Spurendriftkammer und besteht aus einem 88mˆ3 großen Gasvolumen, das von der zentralen Hochspannungselektrode in zwei Seiten geteilt wird. Durchquert ein Teilchen das Gasvolumen, ionisiert es entlang seiner Spur eine spezifische Menge von Gasatomen. Die Ionisationselektronen driften entlang des extrem homogenen elektrischen Feldes zu den Auslesekammern an den Endkappen auf beiden Seiten der TPC. Die Messung der Position und der Menge der Ionisationselektronen erlaubt die Rekonstruktion der Teilchenspur sowie, in Kombination mit der Impulsmessungen über die Krümmung der Teilchenspur im Magnetfeld, die Bestimmung der Teilchensorte über den spezifischen Energieverlust pro Wegstrecke im Gas. Das Gasvolumen der TPC war in LHC Run 1 (2010–2013) mit Ne-CO_2 (90-10) gefüllt. Die Gasmischung wurde zu Ar-CO_2 (88-12) für Run 2 (2015–2018) geändert. Als Auslesekammern wurden Vieldrahtproportionalkammern verwendet, die aus einer segmentierten Ausleseebene, einer Anodendrahtebene, einer Kathodendrahtebene und einem Gating-Grid (GG) bestehen. Das GG is eine zusätzliche Drahtebene, die durch zwei verschiedene Spannungseinstellungen transparent oder undurchlässig für Elektronen und positive Ionen geschaltet werden kann.
In den ersten Daten von Run 2 bei hohen Interaktionsraten wurden große Verzerrungen der gemessenen Spurpunkte beobachtet, die auf Grund von Verzerrungen des Driftfeldes auftreten und nicht von Daten aus Run 1 bekannt waren. Diese Verzerrungen treten nur sehr lokal an den Grenzen von manchen der inneren Auslesekammern (IROCs) auf. Zudem wurden auch große Verzerrungen in einer (C06) der äußeren Auslesekammern (OROCs) festgestellt, die sich bei einem bestimmten Radius über die ganze Breite der Kammer erstrecken. Die Ergebnisse dieser Arbeit befassen sich mit der Untersuchung jener Verzerrungen und ihrer Ursache, sowie mit der Entwicklung von Strategien um die Verzerrungen zu minimieren.
Messungen der Verzerrungen in den IROCs und Vergleiche mit Simulationen lassen darauf schließen, dass die Verzerrungen von positiver Raumladung hervorgerufen werden, die durch Gasverstärkung an sehr begrenzten Regionen der Auslesekammern entsteht und sich durch das Driftvolumen bewegt. Es werden charakteristische Abhängigkeiten von der Interaktionsrate sowie systematische Veränderungen bei Umkehrung der Orientierung des Magnetfeldes gemessen. Eine erneute Analyse von Run 1 Daten mit den Methoden aus Run 2 zeigt, dass die Verzerrungen bereits in Run 1 auftraten, jedoch durch die Ne-Gasmischung und niedrigere Interaktionsraten um eine Größenordnung kleiner waren. Neue Daten aus Run 2, für die die Gasmischung zeitweise wieder von Ar-CO_2 zu Ne-CO_2- N_2 geändert wurde, bestätigen die Ergebnisse der Run 1 Datenanalyse. Der Ursprung der Raumladung wird systematisch eingegrenzt. Es werden einzelne IROCs identifiziert, an deren Anodendrähten die Raumladung entsteht. Physikalische Modelle ermöglichen es, die Entstehung der Raumladung auf das Volumen zurückzuführen, das sich zwischen zwei IROCs befindet. Damit besteht die Vermutung, dass einzelne Spitzen von Anodendrähten am äußeren Rand dieser IROCs in das Gasvolumen hineinragen und somit hohe elektrische Felder erzeugen, an denen Gasverstärkung stattfindet. Die positiven Ionen können dann ungehindert in das Driftvolumen gelangen. Um diesen Effekt zu unterdrücken, wird das Potential der Cover-Elektroden angepasst, die sich auf den Befestigungsvorrichtungen der Drahtebenen an den Kammerrändern befinden. Dadurch kann die Menge von Ionisationselektronen, die in das Volumen zwischen zwei IROCs hineindriftet und vervielfacht wird, eingeschränkt werden. Über elektro-statische Simulationen und Messungen wird eine Einstellung für das Cover-Elektroden-Potential gefunden, mit der die Verzerrungen auf 30 % reduziert werden können. Die Verzerrungen in OROC C06 entstehen durch positive Ionen, die aus der Verstärkungsregion in das Driftvolumen gelangen, da an dieser bestimmten Stelle zwei aufeinanderfolgende GG-Drähte den Kontakt verloren haben. Die Verzerrungen werden um mehr als einen Faktor 3 reduziert, indem die Hochspannung der Anodendrähte um 50 V und somit der Gasverstärkungsfaktor um einen Faktor 2 verringert wird und indem das Potential der noch funktionierenden GG-Drähte erhöht wird.
Zusammenfassend konnten die lokalen Raumladungsverzerrungen für die letzte Pb−Pb Strahlzeit von Run 2 auf weniger als 1cm bei den höchsten Interaktionsraten verringert werden. Zudem wurde der Anteil des von Raumladungsverzerrungen betroffenen Volumens der TPC signifikant verringert, sodass die ursprüngliche Auflösung der Spurrekonstruktion wieder erreicht werden konnte.
In this thesis, the emission of protons as well as the production of Λ hyperons, Κ0S mesons and 3ΛH hypernuclei are analyzed multi-differentially as a function of transverse momentum, rapidity and centrality. Therefore, the 3.03 billion 30 % most central Ag(1.58A GeV)+Ag events recorded by HADES are used. Furthermore, the lifetimes of Λ hyperons, Κ0S mesons and 3ΛH hypernuclei are measured. The obtained 3ΛH lifetime of (253 ± 24 ± 42) ps is compatible with the lifetime of free Λ hyperons, as predicted by theoretic calculations due to its low binding energy. Finally, also the double strange Ξ– hyperons are reconstructed. Unfortunately, the fully optimized signals lie below the confidence threshold of 5σ, which is why both an production rate and an upper production limit are estimated using averaged acceptance and efficiency corrections. Never before, 3ΛH or Ξ– were successfully reconstructed and analyzed in heavy-ion collisions at such low energies. The obtained results are compared to previous measurements and put in context with world data form different energies and collision systems.
In this thesis, the flow coefficients vn of the orders n = 1 − 6 are studied for protons and light nuclei in Au+Au collisions at Ebeam = 1.23 AGeV, equivalent to a center-of-mass energy in the nucleon-nucleon system of √sNN = 2.4 GeV. The detailed multi-differential measurement is performed with the HADES experiment at SIS18/GSI. HADES, with its large acceptance, covering almost full azimuth angle, combined with its high mass-resolution and good particle-identification capability, is well equipped to study the azimuthal flow pattern not only for protons, deuterons, and tritons but also for charged pions, kaons, the φ-mesons, electrons/positrons, as well as light nuclei like helions and alphas. The high statistics of more than seven billion Au-Au collisions recorded in April/May 2012 with HADES enables for the first time the measurement of higher order flow coefficients up to the 6th harmonic. Since the Fourier coefficient of 7th and 8th order are beyond the statistical significance only an upper bound is given. The Au+Au collision system is the largest reaction system with the highest particle multiplicities, which was measured so far with HADES. A dedicated correction method for the flow measurement had to be developed to cope with the reconstruction in-efficiencies due to occupancies of the detector system. The systematical bias of the flow measurement is studied and several sources of uncertainties identified, which mainly arise from the quality selection criteria applied to the analyzed tracks, the correction procedure for reconstruction inefficiencies, the procedures for particle identification (PID) and the effects of an azimuthally non-uniform detector acceptance. The systematic point-to-point uncertainties are determined separately for each particle type (proton, deuteron and triton), the order of the flow harmonics vn, and the centrality class. Further, the validity of the results is inspected in the range of their evaluated systematic uncertainties with several consistency checks. In order to enable meaningful comparisons between experimental observations and predictions of theoretical models, the classification of events should be well defined and in sufficiently narrow intervals of impact parameter. Part of this work included the implementation of the procedure to determine the centrality and orientation of the reaction.
In the conclusion the experimental results are discussed, including various scaling properties of the flow harmonics. It is found that the ratio v4/v2 for protons and light nuclei (deuterons and tritons) at midrapidity for all centrality classes approaches values close to 0.5 at high transverse momenta, which was suggested to be indicative for an ideal hydrodynamic behaviour. A remarkable scaling is observed in the pt dependence of v2 (v4) at mid-rapidity of the three hydrogen isotopes, when dividing by their nuclear mass number A (A^2) and pt by A. This is consistent with naive expectations from nucleon coalescence, butraises the question whether this mass ordering can also be explained by a hydrodynamical-inspired approach, like the blast-wave model. The relation of v2 and v4 to the shape of the initial eccentricity of the collision system is studied. It is found that v2 is independent of centrality for all three particle species after dividing it by the averaged second order participant eccentricity v2/⟨ε2⟩. A similar scaling is shown for v4 after division by ⟨ε2⟩^2.
During RUN3 (2021-2023) of the Large Hadron Collider, the Time Projection Chamber (TPC) of ALICE will be operated with quadruple stacks of Gas Electron Multipliers (GEMs). This technology will allow to overcome the rate limitation due to the gated operation of the Multi-Wire Proportional Chambers (MWPCs) used in RUN1 (2009-2013) and RUN2 (2015-2018).
As part of the Upgrade project, long-term irradiation tests, so called "ageing tests", have been carried out. A test setup with a detector using a quadruple stack of 10x10cm2 GEMs was built and operated in Ar-CO2 and Ne-CO2-N2 gas mixtures. The detector performance such as gas gain and energy resolution were monitored continuously. In addition, outgassing tests of materials used for the assembly process of the upgraded TPC were performed. To reach the expected dose of the GEM-based TPC, the detector was operated at much higher gains than the TPC. It was found, that the GEMs could keep their performance within the projected lifetime of the TPC. Most of the tested materials showed no negative impact on the detector. For the tested epoxy adhesive no certain conclusion could be drawn.
At much higher doses than expected for the upgraded TPC, a new phenomenon was observed, which changed the hole geometry of the GEMs and led to a degradation of the energy resolution. Even though its occurrence is not expected during the lifetime of the GEM-based TPC, simulations were carried out to study this effect more systematically. The simulations confirmed, that a change of the hole geometries of the GEMs, lead to an increase of the local gain variation, which results in a decrease of the energy resolution.
Furthermore the effect of methane as quench gas on GEMs was studied, even though this gas is not foreseen to be used in the TPC. From ageing tests with single-wire proportional counters it is well known that hydrocarbons are produced in the plasma of the avalanches, which cover the electrodes and lead to a degradation of the detector performance. Even though GEMs have a quite different geometry, the ageing tests showed, that also this technology tends to methane-induced ageing. A loss of gas gain as well as a degradation of the energy resolution due to deposits on the electrodes was monitored. A qualitative and quantitative comparison between ageing in GEMs and proportional counters was performed.
The main focus of research in the field of high-energy heavy-ion physics is the study of the quark-gluon plasma (QGP). Topic of the present work is the measurement of electron-positron pairs (dielectrons), which grant direct access to some of the key properties of this state of matter, since after their formation they leave the hot and dense medium without significant interaction. In particular, the measurement of the initial QGP temperature is considered a "holy grail" of heavy-ion physics. Therefore, in addition to the analysis of existing data, a feasibility study has been conducted to determine to which extent this goal would be achievable by upgrading the ALICE experiment at CERN.
Dielectrons are produced during all stages of a heavy-ion collision, with their invariant mass reflecting the amount of energy available at the time of their formation. Dielectrons of highest mass are thus produced in the initial scatterings of the colliding nuclei by quark-antiquark annihilation. Correlated electron-positron pairs can also emerge from the decay chains of early-produced pairs of heavy-flavour (HF) particles. During the QGP stage and at the beginning of the hadronic phase, the system emits thermal radiation in the form of photons and dielectrons, which carry information about the medium temperature to the observer. In the final stage of the collision, decays of light-flavour (LF) hadrons produce additional contributions to the dielectron spectrum.
The present work is based on early data from the ALICE experiment recorded from lead-lead collisions at a center-of-mass energy of 2.76 TeV. Due to the limited amount of data, a focus is placed on achieving high efficiencies throughout the analysis. To this end, a special electron identification strategy is developed and a custom track selection applied, together resulting in a tenfold increase in pair efficiency. The dielectron spectrum is evaluated on a statistical basis, using a pair prefilter, which is optimized based on two signal quality criteria, to reduce the fraction of electrons and positrons from unwanted sources at minimum signal loss. In addition, an artifact of the track reconstruction is exploited to suppress pairs from photon conversions and to correct the dielectron yield for a contribution from different-conversion pairs. The main signal uncertainty is extracted from the deviation between results of 20 analysis settings and amounts to 20% in most of the studied kinematic range.
For comparison with the analysis results, a hadronic cocktail consisting of the LF and HF contributions is simulated, which can reasonably well describe the measured dielectron production, with a hint of an enhancement at low invariant mass. Two approaches to model the in-medium modification of the heavy-flavour are followed, resulting in up to 50% suppression, which creates some additional space for a thermal contribution at intermediate mass.
For a complete comparison between experimental data and theoretical expectation, two model calculations are consulted. The Thermal Fireball Model provides predictions for thermal dielectron radiation from the QGP and hadron gas. The data tends to be better described with these additional thermal contributions. For a comparison with a prediction by the UrQMD model, the HF component of the cocktail is subtracted from the data. This results in better agreement if the HF suppression by in-medium effects is taken into account.
The feasibility study in this work has served as a physical motivation for the ALICE upgrade for LHC Run 3. The precision with which the early temperature of the QGP can be determined via dielectrons is chosen as key observable. A multitude of individual contributions are merged into a fully modeled dielectron analysis. The resulting signal-to-background ratio represents some of the expected systematic uncertainties, while from the significance combined with the planned number of lead-lead collisions a realistic "measurement" with statistical fluctuations around the expected dielectron signal is generated using a Poisson sampling technique. Since the HF yield exceeds the QGP thermal radiation by about an order of magnitude, an additional analysis step exploiting the enhanced track reconstruction is introduced to reduce its contribution by up to a factor of five. The resulting reduction in pair efficiency is overcompensated by an up to hundred times higher collision rate. The entire cocktail is then subtracted from the sampled data to isolate the thermal excess yield. The final analysis of this spectrum shows that the inverse slope of the model prediction, which depends directly on the QGP temperature, can be reproduced within statistical and systematic uncertainties of about 10%.
The promising results of this study have contributed on the one hand to the realization of the ALICE upgrade and to a design decision for the new Inner Tracking System, and at the same time represent exciting predictions for upcoming measurements.
Next-generation DIRC detectors, like the PANDA Barrel DIRC, with improved optical designs and better spatial and timing resolution, require correspondingly advanced reconstruction and PID methods. The investigation of the PID performance of two DIRC counters and the evaluation of the reconstruction and PID algorithms form the core of this thesis. Several reconstruction and PID approaches were developed, optimized, and tested using hadronic beam particles, experimental physics events, and Geant simulations. The near-final design of the PANDA Barrel DIRC was evaluated with a prototype in the T9 beamline at CERN in 2018. The analysis finds excellent agreement between the experimental data and the Geant simulations for all reconstruction algorithms. The best PID performance of up to $5.2 \pm 0.2$ s.d. $\pi$/K separation at 3.5 GeV/c, was obtained with a time imaging PID method. The PANDA Barrel DIRC simulation, as well as the reconstruction and PID algorithms, were evaluated using experimental data from the GlueX DIRC as part of the FAIR Phase-0 program. The performance validation was carried out using physics events of the GlueX experiment and simulations. The initial analysis results of the commissioning dataset show a $\pi$/K separation power of up to 3 s.d. at a momentum of 3.0-3.5 GeV/c, obtained using a geometric reconstruction algorithm.
Das CBM-Experiment konzentriert sich auf die Untersuchung der Eigenschaften des Quark-Gluon-Plasmas bei hohen Netto-Baryonendichten und moderaten Temperaturen. An der zukünftigen Beschleunigeranlage FAIR an der GSI findet das Experiment, neben vielen anderen Experimenten, ihren Platz. Der TRD ist, neben dem RICH, STS und TOF, einer der zentralen Detektoren im CBM-Experiment. Der TRD nutzt dabei den physikalischen Effekt der Übergangsstrahlung, die durch ein geladenes Teilchen beim Durchqueren einer Grenze zweier Medien mit unterschiedlichen Dielektrizitätskonstanten mit einer gewissen Wahrscheinlichkeit entsteht, um Elektronen von Pionen trennen zu können. Im Jahr 2017 wurde an der DESY 4 TRD-Prototypen in einer Teststrahlzeit getestet. Dabei handelt es sich um große TRD-Module mit den Maßen 95 · 95 cm2 , was dem finalen Design sehr nahe kommt. Die Untersuchung der DESY-Daten in Kapitel 5 brachte große Problematiken in den Daten zum Vorschein. Die Hauptprobleme der DESY-Daten sind: 1) Bug des SPADIC-Chips 2.0, bei der FN-Trigger zeitlich verschoben wurden; 2) schwache und suboptimale Trigger-Bedingung, wodurch sehr viel Rauschen aufgenommen wurde. Die Daten müssen für weitere Auswertung aufbereitet werden, wobei sehr viel Information und Statistik verloren geht, da einige Daten durch diverse Probleme nicht mehr rekonstruierbar sind. Kapitel 6 beschäftigt sich mit der Simulation der Detektorantwort und geht genauer auf die einzelnen Schritte, die zur Simulation des vom SPADIC erzeugten Pulses benötigt werden, ein. Am Ende werden Ergebnisse aus beiden Datensätzen miteinander verglichen. Um einen optimalen Vergleich zu gewähren, wird die Simulation bestmöglich an die Einstellungen in der Teststrahlzeit angepasst. Hauptsächlich geht es um die Erhöhung des Gasgains und der Verschiebung der Peaking-Zeit des Pulses. Im Allgemeinen können wir in der Simulation einige Effekte, die auch in den DESY-Daten vorkommen, nachsimulieren. Wir erhalten zum Teil sehr unterschiedliche Ergebnisse in der Simulation, deren Richtigkeit nicht verifiziert werden kann, da die Daten aufgrund der Probleme unzuverlässig werden. Durch die Analyse der DESY-Daten konnten wir die Problematik in den Daten besser verstehen. Eine sinnvolle Anpassung der Simulation wird durch die Unzuverlässigkeit der DESY-Daten unmöglich. Für die Optimierung der Simulation müsste man einen Vergleich mit neueren, zuverlässigeren Daten aus zukünftigen Teststrahlzeiten nehmen.
Die extrem hohen Interaktionsraten, die mit dem CBM Experiment verfügbar sein werden, erlauben die Messung von einigen der herausfordensten Observablen im Feld der Schwerionenphysik. Im besonderen die Messung von Dileptonen im mittleren Massenbereich ist nahezu unmöglich für eine Vielzahl anderer Experimente, da die extrem kleinen Wirkungsquerschnitte der Produktionskanäle das Auftreten eines messbaren Ereignisses so selten machen, so dass es nicht möglich ist eine ausreichende Anzahl dieser Ereignisse zu messen. Hinzu kommt, dass speziell im Energiebereich des CBM Experiments bisher absolut keine Messdaten verfügbar sind, obwohl es zahlreiche Hinweise von theoretischer Seite und von Messungen bei größeren Kollisionsenergien darauf gibt, dass wir im Energiebereich des CBM Experiments bedeutende Entdeckungen machen k¨onnten. Eine solche Messung dieser Observable könnte einen direkten Zugang zu Informationen bezüglich eines potentiellen Phasenubergangs von hadronischer Materie (bzw. im Hadronengas) in den Zustand eines Quark-Gluonen Plasmas liefern. Zusätzlich bieten Dileptonen noch die Möglichkeit Indikatoren für eine Wiederherstellung der chiralen Symmetrie zu messen...
In dieser Arbeit wurde zunächst schrittweise das Vorgehen beim Bau der TRD Prototypkammern , sowie die Maßnahmen zur Verbesserung der Kammerstabilität erklärt, um sicherzustellen, dass die erhobenen Messdaten zuverlässig sind. Es ist an dieser Stelle nochmals hervorzuheben, dass bereits kleine Veränderungen in der Bauweise einen großen Einfluss auf die Kammerstabilität haben.
Es wurde mit der Kammer 3 der Anodenstrom, die deponierte Photonenenergie und die Clusterrate gemessen. Anschließend wurden diese Daten ausgewertet und aus den Ergebnissen die Gasverstärkung berechnet. Die Auswertung bestätigt, dass die Kammer im Proportionalbereich betrieben wurde. Nach dem Vergleich der Gasverstärkungsfaktoren der Messung mit den simulierten Werten, zeigt sich dass die Messungen stärker als erwartet von den simulierten Werten abweichen.
Für weitere, genauere Aussagen wäre es interessant die Ergebnisse dieser Arbeit durch modifizierte Messungen zu uberprüfen. Dabei könnte der Einfluss verschiedener Gasdrucke innerhalb und außerhalb der Kammer sowie die Variation der Raumtemperatur auf die Gasverstärkung explizit untersucht werden. Außerdem wäre es von großem Interesse, Messungen mit verschiedenen Ar und CO2 und Xe und CO2 Mischverhältnissen durchzuführen, da der TRD im CBM Experiment mit Xe und CO2 betrieben werden soll, und der Gasverstärkungsfaktor ausschlaggebend für die angelegte Anodenspannung im laufenden Betrieb sein wird.