Refine
Year of publication
Document Type
- Doctoral Thesis (52)
Has Fulltext
- yes (52)
Is part of the Bibliography
- no (52)
Keywords
- Molekülstruktur (2)
- RNA (2)
- rhodopsin (2)
- solid-state NMR (2)
- 2-Photonen (1)
- Ackerschmalwand (1)
- Arzneimitteldesingn (1)
- Arzneimittelentwicklung (1)
- Azide (1)
- C. elegans (1)
Institute
- Biochemie und Chemie (30)
- Biochemie, Chemie und Pharmazie (19)
- Biowissenschaften (1)
- Pharmazie (1)
- Physik (1)
Integral membrane proteins (IMPs) account for 20-40% of all open reading frames in fully sequenced genomes and they are target of approximately 60% of all modern drugs. So far, cellular expression systems are often very insufficient for the high-level production of IMPs. Toxic effects, instability or formation of inclusion bodies are frequently observed effects that prevent the synthesis of sufficient amounts of functional protein. I have successfully established an individual cell-free (CF) expression system to overcome these IMP synthesis difficulties. The CF system was established in two different expression modes. If no hydrophobic compartment is provided, the IMPs precipitate in the reaction mixture. Interestingly, these insoluble proteins are found to differ from inclusion bodies as they readily solubilize in mild detergents and the bacterial small multi drug transporter EmrE, expressed in the insoluble mode was shown to reconstitute into liposomes in an active form. Alternatively, IMPs can be synthesized in a soluble way by supplementing the CF system with detergents. A comprehensive overview of 24 commonly used detergents was provided by analyzing their impact on the CF system as well as their ability to keep three structurally very different proteins in solution. The class of long chain polyoxyethylene-alkyl-ethers turned out to be most suitable for soluble expression of a-helical EmrE, the bacterial b-barrel type nucleoside transporter Tsx and the porcine vasopressin receptor type 2, resulting in several mg of protein per mL of reaction mixture. So far IMPs have almost completely been excluded from solution nuclear magnetic resonance (NMR) analyses. I could demonstrate that CF expression enables efficient isotopic labeling of IMPs for NMR analysis and further facilitates selective labeling strategies with combinations of 13C and 15N enriched amino acids that have not been feasible before. Four different G-protein coupled receptors (GPCRs) were successfully CF expressed in preparative scale and for the human endothelin B receptor (ETB), ligand binding ability was observed. A series of truncated ETB derivatives containing nested terminal deletions have been CF produced and functionally characterized. The core area essential for Endothelin-1 binding as well as a central region responsible for ETB oligomer formation was confined to a 39 amino acid fragment including the proposed transmembrane segment 1. The binding constant (KD) of ETB was determined to 6 nM for circular ET-1 by SPR and 29 nM for linear ET-1 by TIRFS. This data indicate a large potential of the established individual CF expression system for functional IMP synthesis.
According to the World Health Organization (WHO) bacterial resistance to antibiotic drug therapy is emerging as a major public health problem around the world. Infectious diseases seriously threaten the health and economy of all countries. Hence, the preservation of the effectiveness of antibiotics is a world wide priority. The key to preserving the power of antibiotics lies in maintaining their diversity. Many microorganisms are capable of producing these bioactive products, the so called antibiotics. Specifically in microorganisms, polyketide synthases (PKS) and non-ribosomal peptide synthases (NRPS) produce these natural bioactive compounds. Besides being used as antibiotics these non-ribosomal peptides and polyketides display an even broader spectrum of biological activities, e.g. as antivirals, immunosuppressants or in antitumor therapy. The wide functional spectrum of the peptides and ketides is due to their structural diversity. Mostly they are cyclic or branched cyclic compounds, containing non-proteinogenic amino acids, small heterocyclic rings and other unusual modifications such as epimerization, methylation, N‐formylation or heterocyclization. It is has been shown that these modifications are important for biological activity, but little is known about their biosynthetic origin.
PKS and NRPS are multidomain protein assembly lines which function by sequentially elongating a growing polyketide or peptide chain by incorporating acyl units or amino acids, respectively. The growing product is attached via a thioester linkage to the 4’-phosphopantetheine (4’-Ppant) arm of a holo acyl carrier protein (ACP) in PKSs or holo peptidyl carrier protein (PCP) in NRPSs and is passed from one module to another along the chain of reaction centers. The modular arrangement makes PKS and NRPS systems an interesting target for protein engineering. More than 200 novel polyketide compounds have already been created by module swapping, gene deletion or other specific manipulations. Unfortunately, however, engineered PKS often fail to produce significant amounts of the desired products. Structural studies may faciliate yield improvement from engineered systems by providing a more complete understanding of the interface between the different domains. While some information about domain-domain interactions, involving the most common enzymatic modules, ketosynthase and acyltransferase, is starting to emerge, little is known about the interaction of ACP domains with other modifying enzymes such as methyltransferases, epimerases or halogenases.
To further improve the understanding of domain-domain interactions this work focuses on the curacin A assembly line. Curacin A, which exhibits anti-mitotic activity, is from the marine cyanobacterium Lyngbya majuscula. This outstanding natural product contains a cyclopropane ring, a thiazoline ring, an internal cis double bond and a terminal alkene. The biosynthesis of curacin A is performed by a 2.2 Mega Dalton (MDa) hybrid PKS-NRPS cluster. A 10-enzyme assembly catalyzes the formation of the cyclopropane moiety as the first building block of the final product. Interestingly, for these enzymes the substrate is presented by an unusual cluster of three consecutive ACPs (ACPI,II,III). Little is known about the function of multiple ACPs which are supposed to increase the overall flux for enhanced production of secondary metabolites.
The first task in this work was to elucidate the structural effect of the triplet ACP repetition by nuclear magnetic resonance (NMR). The initial data show that the excised ACPI, ACPII or ACPIII proteins resulted in [15N, 1H]-TROSY spectra with strong chemical shift perturbations (CSPs), suggesting an effect on the structure. The triplet ACP domains display a high sequence identity (93- 100%) making structural investigation using usual NMR techniques due to high peak overlap impossible. To enable the investigation of the triplet ACP in its native composition we developed a powerful method, the three fragment ligation. Segmental labeling allows incorporating isotopes into one single domain in its multidomain context. As a result we could prepare the triplet ACP with only one domain isotopically labeled and therefore assign the full length protein. In this way our method paved the way to study the structural effects of the triplet ACP repetition. We could show unexpectedly, that, despite the fact that the triplet repeat of CurA ACPI,II,III has a synergistic effect in the biosynthesis of CurA, the domains are structurally independent.
In the second part of this work, we studied the structure of the isolated ACPI domain. Our results show that the CurA ACPI undergoes no major conformational changes upon activation via phosphopantetheinylation and therefore contradicts the conformational switching model which has been proposed for PCPs. Further we report the NMR solution structures of holo-ACPI and 3-hydroxyl-3-methylglutaryl (HMG)-ACPI. Data obtained from filtered nuclear overhauser effect (NOE) experiments indicate that the substrate HMG is not sequestered but presented on the ACP surface.
In the third part of this work we focussed on the protein-protein interactions of the isolated ACPI with its cognate interaction partners. We were especially interested in the interaction with the halogenase (Cur Hal), the first enzyme within the curacin A sub-cluster, acting on the initial hydroxyl-methyl-glutaryl (HMG) attached to ACPI. Primarily we studied the interaction using NMR titration and fluorescence anisotropy measurements. Surprisingly no complex between ACPI and Cur Hal could be detected. The combination of an activity assay using matrix-assisted laser desorption/ionization (MALDI) mass spectroscopy and mutational analysis revealed several amino acids of ACPI that strongly decrease the activity of CurA Hal. Mapping these mutations according to their effect on the Cur Hal activity onto the structure of HMG-ACPI displays that these amino acids surround the substrate and form a consecutive surface. These results suggest that this surface is important for Cur Hal recognition and selectivity. Our research presented herein is an excellent example for protein-protein interactions in PKS systems underlying a specific recognition process.
Channelrhodopsin-2 (ChR2) is a light-gated cation selective channel from the unicellular alga Chlamydomonas reinhardtii, which is involved in phototaxis and photophobic responses. As other rhodopsins, ChR2 comprises a seven-transmembrane helix (TMH) motif and a retinal as the light-sensitive chromophore. The chromophore is covalently attached via a protonated Schiff base to the conserved lysine residue Lys257 located in TMH7. Based on its primary sequence and the all-trans configuration of the retinal in the ground state, ChR2 is assigned to the type I rhodopsins, also referred to as microbial-type rhodopsins. Upon light activation, the retinal isomerizes from the all-trans to the 13-cis form. This photoisomerization, which is accompanied by conformational changes of the protein, eventually leads to the opening of the channel and cation translocation. Cation flux during the conductive state leads to depolarization of the cell membrane and subsequent triggering of action potentials when expressed in neurons. Therefore, ChR2 has become the most versatile optogenetic tool, enabling a non-invasive investigation of neural circuits at high spatial and temporal resolution. With the rapidly increasing importance of ChR2 as a tool in neurobiology and cell biology, structural information is the prerequisite to an unambiguous understanding of the molecular mechanisms of this unique light-activated ion channel. The coupling between isomerization and structural alterations is well understood for other microbial-type rhodopsins, like bacteriorhodopsin (bR), halorhodopsin (HR) and sensory rhodopsin II (SRII). In case of ChR2, the first data on light-induced conformational changes came from spectroscopic studies and structural information is still missing. However, in order to fully understand the mechanism of light transduction by ChR2, it is necessary to determine the changes in the protein structure at specific steps in the photocycle.
By the time I started my PhD thesis, there was no structural information of ChR2 available. Therefore, the objective of this thesis was to obtain structural information of the transmembrane domain containing the first 315 amino acids of ChR2 by cryo electron crystallography. Besides revealing the structure of membrane proteins, cryo-EM of two-dimensional (2D) crystals is ideal for investigating conformational changes in membrane proteins induced by different stimuli. Therefore, the second objective of my thesis was the investigation of light-induced conformational changes in the slow C128T ChR2 mutant. The ~1,000 times longer lifetime of the open state of the C128T mutant compared to the wild-type allowed to trap different intermediates that accumulate during the photocycle.
In 2012, the X-ray structure of a channelrhodopsin-1/channelrhodopsin-2 chimaera (C1C2) at 2.3 Å resolution in the closed dark-adapted state was published (Kato et al., 2012). The structure revealed the essential molecular architecture of C1C2, including the retinal-binding pocket and the putative cation conduction pathway. Together with biochemical, spectroscopic, mutagenesis experiments, and the high-resolution model, some functionally important residues of ChR2 have been identified. However, unambiguous explanation of the molecular determinants that contribute to activation (gating) and transport were still mostly unknown.
RESULTS AND CONCLUSIONS
The first half of my theses dealt with 2D crystallization of ChR2. I succeeded in obtaining 2D crystals of ChR2 of four different types, which differed in size, crystal packing, crystal contacts and resolution, yielding structure factors up to 6 Å resolution. The crystals were grown by reconstituting the protein with different lipids at various lipid-to-protein ratios. The best crystals formed with the synthetic lipid DMPC and EPL upon detergent removal by dialysis. The projection maps calculated from these crystals revealed the overall structure of C128T ChR2 at 6 Å resolution and were published in 2011 (Müller et al., 2011). Surprisingly, ChR2 was found to be a dimer in all crystal types. The ChR2 dimer was stable both in detergent solution and in the presence of lipids for 2D crystallization. The monomers clearly showed the expected densities for the seven TMHs.
The arrangement of the ChR2 dimers on the four 2D lattices was different. However, comparison of the individual rojection maps revealed no significant differences within the ChR2 interface in the four crystal forms. The observation that the structure of the dimer was the same in all four crystal forms and in different lipids suggested strong specific contacts between the two protomers and implied that the protein was also dimeric in the native membrane. These findings were in agreement with Western blot analysis of plasma membranes from oocytes expressing ChR2 and laser-induced liquid bead ion desorption mass spectrometry, which both showed ChR2 as a dimer. The unusual stability of the ChR2 dimer contrasts with other microbial rhodopsins, which exist in different oligomeric states, i.e. monomers, trimers or dimers. These observations raised the question whether the functional unit is the monomer or the dimer.
The comparison of the projection map of the light-driven proton pump bR at the same resolution showed similar overall dimensions. Based on this comparison, the densities which became evident in the ChR2 projection maps could be assigned to the corresponding seven densities in bR. The shape of the densities near the dimer interface suggested that TMHs 2, 3, and 4 are oriented more or less perpendicular to the membrane plane, while the other four helices appear to be more tilted, as in bR.
Based on the high-resolution bR structure and the projection structures obtained, I have built a homology model. On the basis of this homology model, several residues found in the dimer interface were selected for mutational studies in order to disrupt the dimer interface.
The investigation of light-induced conformational changes in C128T ChR2 was the second part of my thesis. I designed an experimental setup for trapping light-induced conformational changes in C128T ChR2. In addition, I optimized the sample preparation in a way that the different illumination conditions did not alter the quality of the crystals. I have trapped two different functional states, namely the conductive open state and the non-conductive closed dark-adapted state.
In order to visualize the location and the extent of conformational changes, projection difference maps were calculated between the open and the closed state. Visual inspection of the difference maps between the open and the two closed states revealed three difference peaks that map to the TMHs 2, 6, and 7, indicating significant and specific rearrangements of these helices. The strong pair of positive/negative peaks at TMH6 suggests an outward tilt movement of approximately 2 Å. Close comparison of similar work on bR revealed that this movement is likely to occur at the cytoplasmic end of TMH6. A second highly significant negative peak is observed at TMH7, indicating a less pronounced tilt compared to TMH6. The third negative peak at TMH2 indicates a loss of density in this region. No significant differences were recorded at the TMH1, 5 and at the dimer interface formed by TMH3 and 4.
I succeeded in trapping and characterizing the open and closed state in the photocycle of ChR2 and could demonstrate that the transition from the closed to the open state is linked to significant light-induced tilt movements of TMH6 and 7, plus a loss of order in TMH2. These conformational changes are likely to create a large water-filled conducting pore, which seems to be required for the conductance of up to 2,000 ions per photocycle. The previously mentioned spectroscopic studies support the difference structures I obtained. This approach sets the stage for studying structural changes accompanying the formation and decay of other photocycle intermediates in ChR2. Future studies will aim at three-dimensional maps of the open and closed state at higher resolution.
Biological membranes separate the cell interior from the outside and have diverse functions from signal transduction, apoptosis to transportations of ions and small molecules in and out of the cell. Most of these functions are fulfilled by proteins incorporated in the membrane. However, lipids as the main component of membrane not only serve as structural element for bilayer formation but they are also directly involved e.g. signalling processes and bilayer properties are important to mediate protein interactions. To fully understand the role of lipids, it is necessary to develop a molecular understanding of how certain membrane components modify bulk bilayer structure and dynamics. Membranes are known to have many different motions in different conditions and time scales. Temperature, pH, water content and many other conditions change membrane dynamics in a high degree. In addition to this, time scales of motions in membranes vary from ns to ms range corresponding to fast motion and slow motion, respectively. Therefore, membranes are needed to be studied systematically by varying the conditions and using methods to investigate motions in various time scales separately. The aim of this study was therefore perform a combined solid-state NMR / molecular dynamics study on model membranes. Different substrates, such as potential drugs, polarizing agents and signaling lipids were incorporated into bilayers and their location within the membrane and their effect onto the membrane was probed. NSAIDs (non-steroidal anti-inflammatory drugs), pirinixic acid derivatives, ceramides and polarizing agents were the substrates for membranes in this study. There were several experimental methods that were applied in order to investigate effects of these substrates on membrane dynamics. Different kind of phospholipids including POPC, DMPC and DPPC were used. In addition to experimental work, with the information gathered from solid state NMR experiments molecular dynamics simulations were performed to obtain more information about the membranes at the molecular level. As a result, combination of solid-state NMR with molecular dynamics simulations provides very systematic way of investigating membrane dynamics in a large range of time scales.
Pirinixic acid derivatives were special interest of this study because of their activity on peroxisome proliferator-activated receptor (PPAR) as an agonist as well as on enzymes of microsomal prostaglandin E2 synthase-1 (PGE2s) -1 and 5-lipoxygenase (5-LO) as dual inhibitor. Two potent pirinixic acid derivatives, 2-(4-chloro-6-(quinolin-6-ylamino)pyrimidin-2-ylthio)octanoic acid (compound 2) and 2-(4-chloro-6-(quinolin-6-ylamino)pyrimidin-2-ylthio)octanoate (compound 3), have been worked and their insertion depts were investigated by combining of solid state NMR and molecular dynamics simulations. Both experimental and theoretical results pointed out that compound 3 was inserted the phospholipid bilayer more deeply than 2. NSAIDs – lipid mixtures have been also studied here. It is known that consumption of NSAIDs as in mixture with lipids results much fewer side effects than consumption of the drugs alone. Thus, it is crucial to understand interactions of NSAIDs with lipids and investigate the possible complex formation of drugs with lipids. In this study, interactions of three widely used NSAIDs, ibuprofen, diclofenac and piroxicam, with DPPC were investigated by solid-state NMR. 1H and 31P NMR results depicted that ibuprofen and diclofenac had interactions with lipids, which is an indication of drug-lipid complex formation whereas piroxicam didn’t show any interactions with lipids suggesting that no complex formation occurred in the case of piroxicam. Ceramides are known to play key roles in many cell processes and many studies showed that the functions of ceramides are related with the ceramide effects on biological membranes. Therefore, in this study, influences of ceramides on biophysics of lipid bilayers were investigated by using various solid state NMR techniques and molecular dynamics simulations. Results from molecular dynamics simulations clearly showed that ceramide and lipids have strong interactions. More evidences about ceramide-lipid interactions were provided from 1H and 14N NMR results. In addition, it was indicated by both simulation and experimental methods that ceramide increased the rigidity of DMPC by increasing chain order parameters. BTbk is a biradical, which is used as polarizing agent for dynamic nuclear polarization (DNP) experiments and found to be more efficient than other widely used polarizing agents such as TOTAPOL. Since it is a hydrophobic compound, which prefers to stay inside lipid bilayer it is important to investigate the location and orientation of bTbk along the bilayer in order to understand its enhancement profile in DNP measurements. In this study, both NMR relaxation time measurements and molecular dynamics simulations revealed that bTbk tends to stay more close to hydrophobic chain of lipids than the interfacial part of lipids at bilayer surface.
In the first part of this work, a brief introduction on lipid membranes as well as a theoretical summary on both methods of solid-state NMR and molecular dynamics simulations is given. Then, in the second part methodology is introduced for both solid-state NMR spectrometer and theoretical calculations. Afterwards, results of different membrane systems are discussed in the following parts for both solid state NMR and MD. Finally, in the last part, a summary and the conclusion of the overall results together with some future plans are explained.
The knowledge of three-dimensional structures of biomolecules is fundamental for the understanding of their function. Nuclear magnetic resonance (NMR) spectroscopy represents besides X-ray crystallography one of the two most widely used techniques to study macromolecules at atomic resolution. Its application has long been a laborious task that could take months and required the expertise of an experienced scientist, however, owing to the tremendous effort that has been put into the development of respective computer algorithms, structure determination by NMR spectroscopy of small- to medium sized proteins is nowadays routinely performed. CYANA is one widely used software package, which combines the majority of individual steps towards a three-dimensional structure. The most common application of the program, however, restricts to the combined automated NOE assignment and structure calculation based on NOESY peak lists and an existing chemical shift assignment. Completely automated structure determination starting from NMR spectra is to date technically possible with CYANA, however, not yet routinely applied. In order to achieve this long-term goal, the individual steps need to become more robust with regard to data imperfections such as peak overlap, spectral artifacts or a limited amount of NMR data. The work presented in this thesis should be placed within the context of increasing the reliability and improving the accuracy of structures determined by CYANA on the basis of solution- as well as solid-state NMR data.
The chapter “Systematic evaluation of combined automated NOE assignment and structure calculation with CYANA” comprises an extensive study on the robustness of the combined automated NOE assignment and structure calculation algorithm based on experimental solution NMR data sets that were modified in multiple ways to mimic different kinds of data imperfections. The results show that the algorithm is remarkably robust with regard to imperfections of the NOESY peak lists and the chemical shift tolerances but susceptible to lacking or erroneous resonance assignments, in particular for nuclei that are involved in many NOESY cross peaks.
In the chapter “Peakmatch – A simple and robust tool for peaklist matching” a method to achieve self-consistency of the chemical shift referencing among a set of peak lists is presented. The Peakmatch algorithm matches a set of peak lists to a specified reference peak list, neither of which have to be assigned, by optimizing an assignment-free match-score function. The algorithm has been extensively tested on the basis of experimental NMR data sets of five different proteins. The results show that peak lists from many different types of spectra can be matched reliably as long as they contain at least two corresponding dimensions.
NMR structures are represented by bundles of conformers whose spread indicates the precision of the atomic coordinates. However, there is as yet no reliable measure of structural accuracy, i.e. how close NMR conformers are to the “true” structure. Instead, the precision of structure bundles is widely (mis)interpreted as a measure of structural quality. Attempts to increase the precision thus often yield tight structure bundles where the precision overestimates the accuracy. To overcome this problem, the chapter “Increased reliability of NMR protein structures by consensus structure bundles” introduces a new protocol for NMR structure determination with the software package CYANA that produces bundles of conformers with a realistic precision that is throughout a large number of test data sets a much better estimate of the structural accuracy than the precision of conventional structure bundles.
Solid-state NMR is a powerful technique to study molecules which are not amenable to either solution NMR or X-ray crystallography. Despite the reporting of individual atomic resolution structures of membrane proteins and amyloid fibrils based on solid-state NMR data, the application is far from routine. One major obstacle that hinders structure determination by solid-state NMR is the overall lower quality of the solid-state NMR spectra. It is therefore necessary to increase the robustness of the computer algorithms in order to improve the results when using lower quality solid-state NMR spectra. The chapter “Structure calculations of the model protein GB1 from solid-state NMR data” presents structure calculations on the basis of a set of two-dimensional solid-state NMR experiments of the model protein GB1. The most important result obtained from these test calculations is that the limitation of structural accuracy can be attributed to inaccurate distance information resulting from the limited correlation between peak intensities and distance, which is especially severe in spin diffusion-based solid-state NMR experiments.
The chapter “Full relaxation matrix-based correction of relayed polarization transfer for solid-state NMR structure calculation” therefore introduces a method which corrects experimental peak intensities for spin diffusion in order to improve the distance information from solid-state NMR spectra. The results show that the structural accuracy can be significantly improved when using the corrected distance information, however, strongly dependent on the preliminary structural model that is required as input for the method.
G-protein-coupled receptors (GPCRs) from the largest family of receptors in the human body. They contain seven transmembrane helices. There are roughly 800-900 GPCR genes expressed in humans encoded by 4-5% of the human genome. These receptors are the most important signal transducers and play a crucial role in cell physiology and pathology, by using various extracellular stimuli to start complex intracellular signaling. GPCRs interact with a wide variety of stimuli from small molecules (photons, ions, amines) to large molecules (peptides, small proteins), and trigger downstream cascade effects by interacting with G-proteins, GPCR kinases, and ß-arrestin. Because of their crucial roles in many cellular functions, GPCRs are the most important drug targets for the pharmaceutical industry. Approximately 30% of the clinically approved drugs available in the market are against GPCRs. In this work achieved successful expression and purification of GPCRs from class-C and class-A families. Combined with biochemical experiments, DNP-ssNMR, and molecular simulation helped to decipher the mechanism of crosstalk between the allosteric modulator, and the orthosteric binding sites of the peptide receptor. The main findings and major highlights of this dissertation are outlined in the following paragraphs.
The calcium-sensing receptor (CaSR) belongs to the GPCR class-C family and contains a large extracellular domain. This receptor regulates Ca2+ homeostasis in blood and its absorption in the kidney and bone. To understand the molecular and structural mechanisms of these receptors their cDNAs were cloned into the pPICZ and pOET1 vectors to express them in Pichia pastoris and in Sf9 insect cells respectively. The CaSR was successfully expressed heterologously in Pichia pastoris and in the insect cell with high yield. The purified receptor purified in LMNG shows no aggregation in a monomeric state. Further optimization was performed to use it for cryo-EM sample preparation and structure determination. In 2nd part of the thesis, different mini G (mini Gs, mini Gi, mini Gqs, and mini Gsi) DNA constructs were made and expressed in E. coli. It's challenging to obtain active GPCR structures due to the instability of G-protein or G-protein-bound receptors. In this work, all mini-G proteins and chimera mini-G-protein-maltose binding protein (MBP) were cloned and expressed in E. coli and purified with a His-trap column with high purity.
In the last part of the thesis, to decipher the mechanism of allosteric modulation of orthosteric binding sites in the bradykinin receptor was produced and characterized in insect cells. Angiotensin I converting enzyme inhibitors (ACEIs), are very important drugs and are widely used for the treatment of hypertension, congestive heart failure, and diabetic neuropathy. These drugs target primarily the catalytic zinc center of the ACE. It has been shown that enalaprilat, a well-known ACEI, binds to a proposed zinc-binding site on hB1R and even directly activates the receptor. To obtain information on the influence of ACEIs on the receptor-peptide complex, and to have a better understanding of the molecular mechanism and structural plasticity of the bradykinin receptor and PAM, we used the three commercially available ACEIs captopril, enalaprilat, and lisinopril for our studies. An important result of this thesis is that though enalaprilat, captopril, and lisinopril all have similar functional properties in humans, each one regulates the orthosteric binding site of hB1R in a unique way. These findings provide atomic insights into the allosteric modulation of the bradykinin receptor. This study along with the effects of ACEI on the binding sites of receptors also deciphers the effects of the Zn2+ as well as the crosstalk between zinc binding sites and ACEI compounds. The binding of allosteric modulators induces distinct endogenous binding, which might aid in creating new possibilities in the pharmaceutical field.
Resistant microbes are a growing concern. It was estimated that about 33,000 of people die because of the infections caused by multidrug resistant bacteria each year in Europe (ECDC, 2018, https://www.ecdc.europa.eu/). Bacteria can acquire resistance against toxic compounds via different mechanisms and intrinsic active efflux is one of the first mechanisms deployed by bacterial cells. The membrane-localized efflux pumps catalysing this reaction, extract toxic compounds from the interior of the cell and transport these to the outside, thereby maintaining sub-lethal toxin levels in the cytoplasm, periplasm and membranes. Gram-negative three-component efflux pumps, analysed in this study, are composed of an inner membrane protein, a member of the Resistance-Nodulation cell Division (RND) superfamily, an Outer Membrane Factor (OMF) protein and a Membrane Fusion Protein (MFP) that connects the two afore mentioned components into an active efflux pump. The pumps described in this work, AcrAB-TolC and EmrAB-TolC, are drug efflux pumps belonging to the RND and MFS superfamilies, respectively, while CusCBA is an efflux pump that belongs to the RND heavy metal efflux family. Another efflux pump that was used as a model for the design of an in vitro assay for the silver ion transport studies, CopA, belongs to the P-type ATPase superfamily. All pumps analysed in this study are part of the resistance system of Escherichia coli, which is a highly clinically relevant pathogen.
In order to examine the AcrAB-TolC, CopA and CusA efflux pumps, the individual components were separately produced in E. coli, purified to monodispersity and reconstituted in large unilamellar vesicles, LUVs. Means for the optimized production and adequate conditions for efficient reconstitution were presented in this study. The activity of AcrB in LUVs was detected using fluorescence quenching of the dye 8-hydroxy-1,3,6 pyrenetrisulfonate (pyranine), which is incorporated inside the proteoliposomes and is sensitive to the pH changes in its surrounding. The inactive AcrB variant with a substitution in the proton relay network, D407N, showed no activity in proteoliposomes, which correlates with the measurements done in empty liposomes. When AcrA was co-reconstituted with AcrB D407N proteoliposomes it did not restore protein activity. To test the assembly of the AcrAB-TolC pump out of its single components, an in vitro assay was established where the complex assembly was tested with AcrAB- and TolC-containing liposomes. These experiments showed putative AcrAB-TolC formation in the presence or absence of a pump substrate, taurocholate, as well as in the presence of the pump inhibitor, MBX3132. The assembly appeared stable over time and results were invariant in the presence or absence of a pH gradient across the AcrAB-containing membrane.
After determination of the ATPase activity of the P-type ATPase, CopA, in detergent micelles, the protein was reconstituted in LUVs. Quenching of the Ag+-sensitive dye Phen Green SK (PGSK), present on the inside of the CopA-containing proteoliposomes, was observed in presence of ATP and Ag+. Under the same conditions, but in absence of Ag+-ions, quenching was reduced by 80 % after 300 seconds. No PGSK-quenching was observed in control liposomes in the presence of ATP and Ag+. The additional presence of sodium azide led to minimal reduction of the PGSK-quenching as expected since sodium azide is not an inhibitor of P-type ATPases, but the quenching rate was similar to that of the same experimental condition with control liposomes.
The RND superfamily member CusA, as part of the tripartite CusCBA efflux pump, has been proposed to sequester Ag+ or Cu+ from either the cytoplasmic or periplasmic side of the inner membrane. The periplasmic transport of silver ions was implied from an in vitro assay where the quenching of a pH sensitive dye, 9-amino-6-chloro-2-methoxyacridine (ACMA), indicates acidification of the lumen of the proteoliposomes containing CusA when an inwardly directed pH was imposed. The same experiment with the CusA D405N variant, which was previously reported to be an inactive variant, also led to ACMA quenching, although at a slightly lower rate. Under application of an inwardly directed pH and a (negative inside), CusA-containing proteoliposomes showed a strong quenching of the incorporated PGSK dye, suggesting strong Ag+ influx.
The Major Facilitator Superfamily-(MFS-) type EmrAB-TolC pump has an analogous structural setup as the RND-type AcrAB-TolC pump. To examine the efflux of one of its substrates, carbonyl - cyanide m-chlorophenylhydrazone (CCCP), a plate-based susceptibility assay was used. The presence of the EmrAB-TolC pump confers lower susceptibility levels towards CCCP in E. coli, compared to cells not expressing the pump or cells expressing only the MFS component, indicating that EmrAB-TolC extrudes CCCP.
The work done in this study opens up a path towards investigation of drug and metal resistance in vitro. The methodologies to obtain proteoliposomal samples of multicomponent efflux pumps and subsequent measurements of drug/metal ion and H+ fluxes, as well as the determination of pump assembly are crucial for the future research on pump catalysis and transport kinetics. The in vivo drug-plate assays done in this work provide initial insights for future investigations of the drug susceptibility of E. coli expressing the MFS-type tripartite efflux pumps.
Eine wichtige Klasse von Membranproteinen ist die der aktiven sekundären Transporter. Diese Proteine werden in allen Spezies gefunden und verwenden einen Gradienten von löslichen Substanzen, um den Transport von Substraten voran zu treiben. Dieser Transportprozess ist essentiell, um die chemische Zusammensetzung des Zytoplasmas, wie Kalium- oder Natriumkonzentration von der des umgebenden Milieus unterschiedlich zu halten. Die Konzentration von K+ und Na+ in der Zelle sind wichtig für ein konstantes Zellvolumen, für die pH-Homöostase, für die Erregbarkeit von Nervenzellen und füür die Akkumulierung von Zuckern und Aminosöuren über Kotransportsysteme. In Bakterien wie Escherichia coli wird mit der Oxidation von Substraten durch die Elektronentransportkette ein Protonengradient und gleichzeitig eine Potentialdifferenz erzeugt. Ein Beispiel für einen sekundären Transporter, der diese Potentialdifferenz ausnutzt ist der Na+/H+-Antiporter NhaA, einer der am besten untersuchten Antiporter aus E. coli (Hunte, Screpanti et al. 2005). Dieser Antiporter ist essentiell für die Fähigkeit von Bakterien im alkalischen pH-Bereich zu überleben. Auch bei Säugetieren, sind die Isoformen der humanen Natrium/Protonen-Antiporter SLC9A1-SLC9A8 (NHE1-8) unentbehrlich für eine Reihe physiologischer Prozesse. So wird über die Antiporter-Aktivität nicht nur der Säure-Base-Haushalt und das Verhältnis des Zellvolumens zur Menge an Elektrolyten reguliert, Antiporter spielen ebenso eine wichtige Rolle bei der Adhäsion, Migration und Proliferation der Zelle (Orlowski and Grinstein 2004). Anomalien in diesem Bereich sind charakteristisch für maligne Zellen. Die Rolle von NHE1 in der Entwicklung von Tumoren ist daher ein wichtiger Ansatzpunkt für die Entwicklung von Krebsmedikamenten. Im Herz ist NHE1 die dominierende Isoform und wird damit zu einem pharmakologisch wertvollen Zielprotein (Malo and Fliegel 2006). Struktur und Mechanismus der meisten Antiporter ist bis dato jedoch noch nicht bekannt. Neben den klassischen Methoden der Pharmaentwicklung wird die strukturbasierende Wirkstoffentwicklung immer wichtiger um effiziente Medikamente ohne Nebenwirkung zu herzustellen. Hierfür werden jedoch 3D-Strukturen von Proteinen, sowie genaue Kenntnisse von deren Mechanismus benötigt. Zieht man in Betracht, dass 70% aller bis jetzt entwickelten Medikamente als Ziel ein Membranprotein haben, wird die Notwendigkeit klar, eine möglichst große Anzahl von Membranproteinstrukturen verfgbar zu haben. Wie bereits erwähnt ist die Klasse der monovalenten Kation/Proton-Antiporter aufgrund ihrer vielfältigen Aufgaben, eine äußerst wichtige Zielgruppe für die strukturbasierende Wirkstoffentwicklung. Die große Anzahl an entschlüsselten Genomen eröffnet hier ein breites Forschungsfeld füür die Strukturbiologie. In dieser Arbeit wurden daher Techniken und Methoden aus Hochdurchsatz-orientierten Strukturgenomikprojekten übernommen, um eine große Anzahl von Zielproteinen in ausreichender Menge für die funktionelle Charakterisierung und für die Kristallisation zu produzieren. Als Zielorganismen wurden Salmonella typhimurium LT2, Helicobacter pylori 26695, Aquifex aeolicus VF5 und Pyrococcus furiosus ausgewählt. Die Grundlage dieser Entscheidung hierfür waren die humanpathogenen Eigenschaften der beiden zuerst genannten Organismen und die Hyperthermophilie der beiden letzteren. Dadurch konnten sowohl klinische Anwendungsmöglichkeiten, als auch die potentiell höhere Stabilität der hyperthermophilen Proteine genutzt werden. Als Proteinzielgruppe wurden die monovalenten Kation/Proton-Antiporter aus allen 4 Organismen ausgewählt. Des Weiteren wurden Antiporter zweier eukaryotischer Systeme, Saccharomyces cerevisiae und Homo sapiens in die Zielproteingruppe aufgenommen. In dieser Arbeit wurden 24 verschiedene monovalente Kation/Proton-Antiporter untersucht. Von diesen 24 Zielproteinen konnten 12 in Expressionsvektoren kloniert und produziert werden. Von diesen 12 Antiportern konnten die Zielproteine STM0039 (STNhaA), HP1552 (HPNhaA), STM1556 (NhaC) und PF2032 (NhaC) in einer für die Kristallisation ausreichenden Homogenität und Ausbeute gereinigt werden. Mit der Ausnahme von HP1552 ist bis heute in keiner Veröffentlichung über diese Zielproteine berichtet worden. Durch Komplementationsexperimente mit dem E. coli-Deletionsstamm EP432 konnten eine Reihe von Zielproteine (STM0039, HP1552, PF2032, Aq_2030, STM1806, STM1556) bezüglich ihrer Fähigkeiten zum Na+/H+-Antiport untersucht werden. Die Ziel-proteine STM0039, STM1556 und HP1552 konnten zum ersten Mal kloniert, produziert, gereinigt und anschlieáen in Liposomen rekonstitutiert werden.Weiterhin konnte durch SSM-Messung die pH-Regulation der Zielproteine STM0039 und HP1552 gezeigt werden. Im Gegensatz zu bisherigen Literaturangaben ist HP1552 im pH-Bereich von pH 6 bis 8,5 nicht konstitutiv aktiv, sondern erfährt eine ähnliche Aktivierung wie STM0039 oder ECNhaA. STM0039 lässt sich zudem durch 2-Aminoperimidin inhibieren. Für STM0039 konnten die ersten Proteinkristalle der inaktiven Konformation bei pH 4 erzeugt werden. Weiterhin wurde in dieser Arbeit ein gegen das Zielprotein STM0039 gerichtetes scFV-Antikörperfragment (F6scFv) eingehend charakterisiert. Durch die Ko-Kristallisation des Antikörperfragments F6scFv mit STM0039 konnten die ersten 3 dimensionalen Kristalle in einer aktiven Proteinkonformation bei pH 7,5 erzeugt werden. Neben den bereits verfeinerten Kristallisationsbedingungen für das Zielprotein STM0039 wurden erfolgreich erste Kristallisationsbedingungen für STM0086 und PF2032 gefunden. Es wurde eine Vielzahl von Produktions- und Reinigungsprotokollen füür die Zielproteine etabliert. Dadurch ist der Grundstein füür weitergehende Charakterisierungs- und Kristalli-sationsexperimente gelegt. Die in dieser Arbeit etablierte Kombination von Hochdurch-satzmethoden mit klassischen Vorgehensweisen zur Proteincharakterisierung lassen sich leicht auf anderen Membranproteinklassen bertragen und die Geschwindigkeit der ver-schiedenen Schritte bis zur Strukturlösung stark beschleunigen.
In the past decade, the optogenetic toolbox for the manipulation of ion currents and cNMP levels in Caenorhabditis elegans (C. elegans) expanded. However, the implemented tools for cAMP generation were soluble enzymes (euPAC, bPAC, IlaC22 k27 and PaaC) and thus they do not precisely mimic physiological cAMP signalling occurring in microdomains in close proximity to the plasma membrane. Here, cAMP is predominantly generated by membrane-bound adenylyl cyclases, that are located in microdomains together with G protein-coupled receptors (GPCRs), protein kinase A (PKA) and their targets, enabling spatially and temporal regulation of cAMP signalling. For this reason, one aim of this study was to develop and implement membrane bound photoactivatable adenylyl cyclases for the manipulation of cAMP mediated signalling in close proximity to the plasma membrane. For this purpose, the guanylyl cyclase domains of the Blastocladiella and Catenaria Cyclase Opsins (CyclOps) were mutated to adenylyl cyclases either by introducing the mutations E497K and C566D (abbreviated as (A-2x)) or by the mutations E497K, H564D, and C566T (abbreviated as (A-3x)).
To determine the nucleotide specificity switch from GTP to ATP and the extent of light-dependent cAMP generation, the engineered enzymes were expressed in body wall muscle cells of C. elegans and in vitro cNMP measurements using C. elegans extracts were performed. Here, the highest levels of light induced cAMP generation during sustained stimulation (0.5 mW/mm2; 470 nm, 15 min) were detected for the variants BeCyclOp(A-2x), YFP-BeCyclOp(A-2x), and YFP-CaCyclOp(A-2x) (39, 57, 40 nM, respectively), though they did not reach the extent produced by the soluble bPAC (142 nM). In contrast, low magnitudes of generated cAMP were measured for the versions BeCyclOp(A-3x) and CaCyclOp(A-2x) (8 and 7 nM, respectively). Importantly, no obvious residual cGMP and basal activity was ascertained for any of the engineered enzymes.
To assess their potential to trigger and modulate cAMP mediated cholinergic neurotransmission, and to evaluate the influence of cytosolic and membrane proximal optogenetic cAMP generation, the enzymes were expressed in cholinergic motor neurons and compared to the implemented soluble bPAC via locomotion behaviour analysis on solid and in liquid media. Photoactivation of BeCyclOp(A-2x), YFP-BeCyclOp(A-2x), and YFP-CaCyclOp(A-2x) caused similarly enhanced or even more potent behavioural changes (swimming and crawling) as bPAC, whereas a more rapidly decaying response was observed for the bPAC evoked effects. Moreover, an increased diversity of the behavioural output was detected for cytosolic cAMP production by bPAC, i.e. increased bending angles and a decreased body length.
Confocal fluorescence microscopy was performed to examine the expression levels of YFP-tagged enzymes in cholinergic neurons, whereas both YFP-CyclOp(A-2x)s were expressed at similar levels, but 1.4-fold lower relative to the soluble bPAC-YFP. To compare the amount of light-dependent cAMP generation bPAC and BeCyclOp(A-2x) at light conditions that match the conditions of the behavioural experiments (30 s), cAMP measurements using C. elegans extracts were performed, whereas BeCyclOp(A-2x) depicted a 4-fold lower amount of optogenetic cAMP production than the soluble bPAC.
In sum, local (membrane proximal) cAMP generation by the membrane-bound photoactivatable adenylyl cyclases may more specifically activate cAMP dependent neurotransmission of cholinergic motor neurons than cytosolic cAMP generation, i.e. an increased mobilization and priming/docking of synaptic vesicles and an increased filling of the synaptic vesicles with the neurotransmitter acetylcholine and thus an increase in locomotion behaviour.
The optogenetic toolbox for the manipulation of cGMP mediated signalling in C. elegans consisted of the natural membrane-bound BeCyclOp and the artificial soluble bPGC. The latter generates cGMP with low efficiency and slow kinetics (~0.2 cGMP s-1), whereas BeCyclOp enables the production of much larger amounts of cGMP (L/D = 5000) at a high turnover rate (~17 cGMP s-1). Thus, one aim of this thesis was to implement a tool with features in between those of BeCyclOp and bPGC. Several orthologous CyclOps were assessed by Gao et al., 2015 for light-regulated cGMP production by in vitro assays based on the measurement of the cNMP content from CyclOp containing oocyte membranes. Here, CaCyclOp showed the highest ratio of light versus dark activity (L/D = 230) after BeCyclOp, and thus was selected for characterization in C. elegans...
Synaptic transmission is a fundamental process that involves the transfer of information from a presynaptic neuron to a target cell through the release of neurotransmitters. The SV cycle is a complex series of events that enables the recycling of SVs, allowing for the sustained release of neurotransmitters. This process is mediated by a variety of proteins and enzymes, and its regulation is critical for maintaining proper synaptic function. Despite extensive research efforts, many aspects of the SV cycle and the underlying synaptic proteins remain poorly understood, highlighting the need for continued investigation into this important process. During this work, multiple aspects of synaptic transmission were studied by performing
behavioural, pharmacological, optogenetic, electrophysiological and ultrastructural assays on Caenorhabditis elegans. First, the role of two proteins (ERP-1 and RIMB-1) were analysed in the synaptic vesicle cycle. Second, a new optogenetic tool, the pOpsicle assay was described, which enables the direct visualization of synaptic vesicle (SV) release.
Activity-dependent bulk endocytosis (ADBE) enables the endocytosis of SV membrane and proteins in a fast manner during intense stimulation, resulting in bulk endosomes (also so-called large vesicles, LVs). Recycling proteins can be characterized by its site of action, whether they act at the plasma membrane (participating at the LV formation), or at the LV membrane (participating at the SV formation). ERP-1 (the C. elegans ortholog of Endophilin B) was recently identified as a possible SV recycling factor, its contribution to synaptic transmission has not been analysed before. During this project the function and possible cooperation of three proteins, ERP-1, UNC-57 (the C. elegans ortholog of Endophilin A) and CHC-1 (the C. elegans ortholog clathrin heavy chain) were studied, with a special emphasis of the site of action. It has been confirmed that these proteins participate together in synaptic vesicle recycling. Endophilins (ERP-1 and UNC-57) act both at the PM and the LV level, but while UNC-57 has been identified as the main player, ERP-1 rather has a minor role and acts as a back-up protein. CHC-1 functions the LV level in the first place, but it can compensate for the loss of UNC-57 and acts as a back-up protein at the PM.
RIM-binding protein is an evolutionarily conserved active zone protein, which interacts directly with RIM and N, P/Q, as well as L-type Ca2+ channels. RIM-BP and RIM have redundant functions in different model organisms including C. elegans, however, while the loss of UNC-10 (the C. elegans ortholog of RIM) led to drastic behavioural defects, the loss of RIMB-1 (the C. elegans ortholog of RIM-BP) led only to mild phenotypes. During this work the synaptic function of RIMB-1 and its interaction with UNC-10 and UNC-2 (C. elegans ortholog of the CaV2 1 subunit) were extensively investigated. It has been shown that RIMB-1 contributes to the precise localization of VGCCs in cooperation with UNC-10. Furthermore, it has been demonstrated, that RIMB-1 plays different roles in cholinergic and GABAergic neurons, thus it contributes to maintain a proper excitation/inhibition balance.
There are numerous available assays, which enable the indirect analysis of synaptic transmission, however, a tool, that enables the direct visualization of SV release, is highly desired. pOpsicle is a method which combines the optogenetic stimulation of cholinergic neurons with real-time visualization of SV release. A pH-sensitive fluorescence protein, pHuji, was inserted into the second intravesicular loop of the synaptic vesicle membrane protein, synaptogyrin (SNG-1). The fluorescence of pHuji is quenched inside the vesicles, but once they are released, the pH increases and pHuji can be detected. pOpsicle enables not only the direct visualization of SV exo-, and endocytosis events, but also the identification of putative SV recycling proteins.