Refine
Year of publication
Document Type
- Doctoral Thesis (19)
- Book (1)
Has Fulltext
- yes (20)
Is part of the Bibliography
- no (20)
Keywords
- Arzneimittel (2)
- Bioequivalence (2)
- Biowaiver (2)
- Wirkstofffreisetzung (2)
- AIDS (1)
- Absorption modeling (1)
- Bioverfügbarkeit (1)
- Dissolution (1)
- Doxycycline (1)
- Fenofibrate (1)
Institute
Lipidartige Formulierungen zur Verbesserung der Bioverfügbarkeit schwer löslicher Arzneistoffe
(2002)
In dieser Arbeit wurde anhand der zwei schwerwasserlöslichen Modellsubstanzen EMD 57033 und Danazol untersucht, inwieweit sich (schwerpunktmäßig halbfeste) lipidartige Hilfsstoffe zur Verbesserung der Wirkstofffreigabe aus der Arzneiform eignen, um dadurch eine im Vergleich mit einer Standardrezeptur erhöhte Bioverfügbarkeit zu erhalten.
The development of a drug product, beginning with the synthesis of the drug substance through approval for marketing, may take up to 15 years and a total amount of investment of up to half a billion Euro. After the discovery of a potential drug substance, many different investigations have to be performed: e.g. characterization of the physical-chemical properties, the pharmacological and toxicological profile and, especially relevant for this work, the development of the first dosage forms. After achieving these steps, first investigations in human studies can be carried out. After a positive assessment of the benefit to risk ratio, further investigations, such as food effects on the pharmacokinetics, multiple dosing studies and further studies on patients can be implemented. After successfully completing this second part the new drug product can be approved. With broader clinical experience it often becomes apparent that changes in relevant aspects of the formulation of the registered drug product e.g. excipients, concentration of the drug substance or excipient versus drug substance ratio, are necessary to optimise the therapy. This often leads to additional clinical investigations and a new registration, a procedure which is time and cost intensive. A possible way to reduce the financial and time investments, is to establish an appropriate in vivo- in vitro correlation (IVIVC). If it is possible to predict the in vivo performance of a drug product adequately with in vitro methods (dissolutions tests), it will no longer be necessary to perform additional clinical investigations. In this work, IVIVCs were investigated for three different drug substances and several different types of formulations.... ...Results of this work clearly show that successful IVIVCs can be achieved for the fasted state using biorelevant dissolution media. A prerequisite of achieving a good IVIVC is the availability of in vivo data of a reference product (i.v., oral solution or IR) tested within the same group of volunteers as the product of interest. Only with this procedure, one can obtain adequate IVIVCs for drug substances with high inter-individual variability of the plasma concentrations and with high first-pass metabolism. This work also shows that predictions of the in vivo behavior of a modified release dosage form after administration with a high fat meal are more difficult to obtain. This is mainly related to an absence of a medium, which could mimic the situation of the fed stomach adequately. Ensure plus®, which was chosen in this work, failed to simulate the fed stomach adequately in several cases; it suppressed the release of rosiglitazone from lipid formulations and led to rapid disruption of the HPMC-matrix of the 5-ISMN Geomatrix formulations. Future work should be directed towards optimization of the test media in the BioDis apparatus. This work clearly shows the inability of Ensure plus® to predict the in vivo performance of a drug under fed state conditions and indicates that alternative media must be developed. It is known that the pH of the stomach rises up to six after the intake of a meal. During the following hours the pH decreases until reaching the baseline value of approximately 1.8. One possibility of simulating the fed state stomach more precisely will be to divide the overall residence time into 4 different parts: 1. half a hour at pH 6 2. half a hour at pH 4 3. one hour at pH 3 4. two hours at pH 1.8 Another option is not only to modify the pH of the medium, but also to change its composition. During the decomposition of the food contents, the composition of the gastric juice changes, the ionic strength, the buffer capacity and the osmolarity rises, while the pH value decreases. A third possibility will be the addition of enzymes, mainly pepsin, lipases and amylases. Again, the quantity of the enzymes differs during the residence time of the food in the stomach. Highest quantities are expected in the first two hours after food intake and decreases in the remaining two hours. Another issue of this work was an assessment of the two dissolution apparatus, Paddle and BioDis. In general, the choice of the dissolution apparatus should be done primarily with respect to the solubility behavior of the drug substance. For high soluble drugs the USP apparatus II, Paddle, is sufficient (e.g. diltiazem or 5-ISMN). In cases of a poorly soluble drug (rosiglitazone), where the release strongly depends on the medium used, the USP apparatus III (BioDis) is favored, due to the advantage of simulating the GI-tract with a gradient of different dissolution media, each simulating one part of the GI-tract. In summary, the results of this work indicate that it is acurrently possible to predict fasted state behavior of a variety of controlled release products using in vitro tests. Prognoses was also made in terms of predicting food effects on the behavior of controlled release products, although it is clear that the media compositions will have to be revised to establish releiable predictive methods for the fed state.
In dieser Arbeit wurden Methoden entwickelt, mit denen das Auflösungsverhalten schwer wasserlöslicher schwacher Säuren verbessert werden kann. Als Modellwirkstoffe wurden drei Vertreter der Sulfonylharnstoff-Gruppe (Glibenclamid, Glipizid und Glimepirid) gewählt. Diese Wirkstoffe, werden zur oralen Standardtherapie des Typ 2 Diabetes eingesetzt. Die Ergebnisse aus den Löslichkeits- und Freisetzungsuntersuchungen der reinen Arzneistoffe bildeten in dieser Arbeit den Ausgangspunkt der Entwicklungsarbeit. Um den Einfluss der galenischen Methoden auf das Freisetzungsverhalten der entwickelten Formulierungen besser zu beurteilen, wurden ebenfalls entsprechende Handelspräparate (Euglucon N 3,5 mg, Luditec 5 mg und Amaryl 4 mg) untersucht. Zunächst wurden mit Glibenclamid und dem natürlichen ?-CD sowie verschieden Cyclodextrin-Derivaten (M-?-CD und HP-?-CD) binäre Komplexe im molaren Verhältnis von 1:2 (Glibenclamid:CD) hergestellt und charakterisiert. Anschließend wurden feste Lösungen aus Glibenclamid und Kollicoat(r) IR bzw. PVP K30 entwickelt. Bei den nachfolgenden Freisetzungsuntersuchungen zeichnete sich im Falle der binären Cyclodextrin-Komplexe ab, dass der Glibenclamid-HP-?-CD-Komplex das beste Freisetzungsverhalten von Glibenclamid in den untersuchten Medien erreichte. Bei den festen Lösungen von Glibenclamid gab es zwischen den beiden untersuchten Polymeren keine signifikanten Unterschiede im Ausmaß der Glibenclamidfreisetzung. Im nächsten Schritt wurden ternäre Komplexe (Glibenclamid-HP-?-CD-Polymer) entwickelt, eine Kombination aus binären CD- Komplexen und festen Lösungen. Als dritte Komponente wurden Kollicoat(r) IR, PVP K30 und PEG 6000 in unterschiedlichen Zusätzen, 5, 10 und 20% bezogen auf den zugrunde liegenden binären Glibenclamid-HP-?-CD-Komplex eingearbeitet. Die Charakterisierung der verschiedenen ternären Komplexe ergab, dass das beste Freisetzungsverhalten bei den Komplexen, welche einen 10%igen Kollicoat(r) IR- bzw. 20%igen PVP K30-Zusatz enthielten, generiert werden konnte. Bei den drei verwendeten Methoden (binäre-, ternäre Komplexe und feste Lösungen) erhielt man während der Freisetzungsuntersuchungen in den Medien mit einem pH-Wert unterhalb des pKs-Wertes von Glibenclamid (5,4) eine übersättigte Wirkstofflösung, was zum Teil innerhalb kürzester Zeit zum Präzipitieren des Wirkstoffes führte. Initiale DSC-Untersuchungen hatten gezeigt, dass Glibenclamid in den beschriebenen Präformulierungen in amorpher Form vorlag, was der Grund für die rasche Freisetzung war. Anschließend wurde versucht, das Präzipitieren zu verlangsamen und im besten Fall zu verhindern. Hierfür wurde HPMC in verschiedenen Formen verwendet. Das einfache Hinzumischen von HPMC in eine Gelatine-Kapsel zu der Glibenclamid-Formulierung führte aufgrund von Agglomeratbildungen zu einer deutlichen Verzögerung der Wirkstofffreisetzung. Pankreatin als Zusatz zum Freisetzungsmedium konnte die Bildung eines Agglomerates nicht verhindern, was darauf schließen ließ, dass dieses nicht durch sogenanntes "Cross-linking" der Gelatine entstanden war. In einem nächsten Schritt wurden HPMC-Kapseln eingesetzt. Die Glibenclamidfreisetzung konnte durch einfaches Austauschen der Gelatine-Kapseln gegen Vcaps(r) Plus-Kapseln in allen untersuchten Medien deutlich gesteigert werden, was auf die durch die Anwesenheit von HPMC verzögerte Präzipitation des Wirkstoffes im Freisetzungsmedium zurückzuführen war. Im nächsten Schritt wurde, die Formulierungsmethode von Glibenclamid, auf Glipizid übertragen. Es wurde analog zu Glibenclamid ein binärer Glipizid-HP-?-CD-Komplex im molaren Verhältnis von 1:2 (Glipizid:HP-?-CD) hergestellt. Dieser Komplex führte zu einer deutlichen Verbesserung des Auflösungsverhaltens von Glipizid, was zu einer annähernd 100%igen Wirkstofffreisetzung in allen untersuchten Medien führte. Weiterhin wurden die mit Glibenclamid entwickelten Methoden auch auf Glimepirid übertragen. Die Formulierung von Glimepirid zu einem binären Glimepirid-HP-?-CD-Komplex führte zu einer höheren Wirkstofffreisetzung, verglichen mit der kristallinen Reinsubstanz und des Handelspräparates. Durch die Verarbeitung von Glimepirid in ternären Komplexen erhöhte sich das Ausmaß der Wirkstofffreisetzung deutlich. Mit Kollicoat(r) IR konnte eine Wirkstofffreisetzung von ca. 60% der Dosis und mit PVP K30 als dritter Komponente sogar ca. 85% Wirkstofffreisetzung in Blank FeSSIF erzielt werden. Das Präzipitieren des Wirkstoffes nach initialer Wirkstofffreisetzung in Blank FeSSIF konnte durch den Einsatz von Vcaps(r) Plus-Kapseln deutlich reduziert werden. Stabilitätsuntersuchungen, welche mit den in dieser Arbeit verwendeten Präformulierungen durchgeführt wurden zeigten, dass der jeweilige Wirkstoff auch nach einem Jahr der Lagerung bei Raumtemperatur und < 30% rel. Luftfeuchte, in amorpher Form in den entsprechenden Präformulierungen vorlag. All diese Untersuchungen zeigten eindrucksvoll, dass sich Cyclodextrin-Derivate in Kombination mit hydrophilen Polymeren, dazu eigneten, die Verfügbarkeit schwer löslicher Wirkstoffe im Dünndarm für deren Resorption zu verbessern. Es wurde gezeigt, dass die Herstellungsmethodik der Cyclodextrin-Komplexe einen wesentlichen Einfluss auf die Wirkstofffreisetzung hatte.
Die vorliegende Arbeit beschreibt Untersuchungen zur Beurteilung der pharmazeutischen Qualität von Phytopharmaka am Beispiel der häufig eingesetzten Johanniskrautextrakt-Präparate. Elf Johanniskrautextrakt-Präparate des deutschen Arzneimittelmarktes wurden hinsichtlich Chargenhomogenität, Chargenkonformität und Gehalt der wirksamkeitsmitbestimmenden Inhaltsstoffe Gesamthypericin und Hyperforin untersucht. Außerdem wurde die Freisetzung von Hyperforin, Hypericinen und Flavonoiden aus verschiedenen Präparaten in kompendialen und biorelevanten Medien geprüft. Zur Analytik des Hyperforins und der Flavonoide wurden zwei HPLC-Verfahren etabliert und nach ICH-Guidelines validiert. Die Analysenzeit der isokratischen Methode zur Bestimmung von Hyperforin war mit 10 Minuten sehr kurz. Somit war die Methode sowohl für die Gehaltsbestimmungen als auch für die Freisetzungsuntersuchungen sehr gut geeignet. Zur Bestimmung der Flavonoide Rutin, Hyperosid/ Isoquercitrin und Quercitrin wurde eine Gradientenelution verwendet, wodurch eine Analysenzeit von 18 Minuten resultierte. Gesamthypericin wurde mittels Differentieller Puls-Polarographie nach Belichtung der Proben bestimmt. Die Ergebnisse der Untersuchung zur Chargenhomogenität von Gesamthypericin und Hyperforin belegten für nahezu alle Präparate eine gute Gleichförmigkeit des Gehaltes der analysierten wirksamkeitsmitbestimmenden Inhaltsstoffe. Im Bezug auf die Chargenkonformität hinsichtlich Gesamthypericin wiesen die Präparate unterschiedliche Resultate auf. Zwar ist es seit Erscheinen des „Bühler-Papiers“ nicht mehr zulässig auf einen definierten Gehalt an Gesamthypericin, zu normieren, einige Extrakthersteller ziehen diese Substanzgruppe jedoch als analytischen Qualitätsparameter bei der Herstellung standardisierter Extrakte heran. So zeigten vier Präparate bei der Untersuchung von je fünf Chargen mit relativen Standardabweichungen von unter 10% eine gute Reproduzierbarkeit des Gesamthypericingehaltes. Die übrigen Präparate wiesen mehr oder weniger starke Schwankungen im Gesamthypericingehalt auf. Die Untersuchung der Chargenkonformität bezüglich Hyperforin führte zu dem Ergebnis, daß lediglich für zwei Präparate (eines Herstellers) eine sehr gute Reproduzierbarkeit des Hyperforingehaltes erreicht wurde. Hier betrugen die relativen Standardabweichungen weniger als 4%. Die übrigen Präparate zeigten mehr oder weniger starke Schwankungen, wobei für ein Präparat der Variationskoeffizient 70% betrug. Auffällig ist, daß die Präparate mit einheitlichen Hyperforingehalten höhere relative Standardabweichungen von ca. 20% bzgl. des Gesamthypericingehaltes zeigten. Umgekehrt zeigten Präparate mit einheitlichem Gesamthypericingehalt oftmals höhere Variationskoeffizienten bei den Hyperforingehalten. Eine gute Chargenkonformität für beide Analyten wiesen lediglich drei Präparate auf. Der relative Gesamthypericingehalt im Extrakt betrug zwischen 0,11 und 0,43%, während der Absolutgehalt an Gesamthypericin Werte zwischen 0,33 und 1,92 mg je Darreichungsform aufwies. Orientiert an den Einnahmeanweisungen der Hersteller lagen die maximalen Tagesdosen Gesamthypericin zwischen 1,00 und 3,69 mg Gesamthypericin. Die gefundenen relativen Hyperforinmengen lagen in der Regel zwischen 1,09 und 4,48% im Extrakt, wobei ein einzelnes Präparat weniger als 0,2% Hyperforin im Extrakt aufwies. Für den Absolutgehalt an Hyperforin wiesen die Präparate Werte zwischen weniger als 0,5 und 28,88 mg auf. Unter Berücksichtigung der Einnahmeempfehlungen des Herstellers ergaben sich daraus Tagesmaximaldosen zwischen < 1 und 53,76 mg Hyperforin. Die Ergebnisse der Freisetzungsuntersuchungen in kompendialen und biorelevanten Medien zeigten, daß Hyperforin im sauren Milieu des Magensaftes nicht freigesetzt wird und es auch unter Bedingungen, die den nüchternen Zustand im proximalen Dünndarm simulieren lediglich zu einer geringfügigen Freisetzung aus der Arzneiform kam. Eine gute Freisetzung konnte hingegen im Medium FeSSIF erreicht werden, daß die Bedingungen des proximalen Dünndarms im gesättigten Zustand simuliert. Gesamthypericin ging zwar im sauren pH-Milieu des Magensaftes ebenfalls nicht in Lösung, unter simulierten Nüchternbedingungen im Dünndarm konnte im Gegensatz zu Hyperforin aber bereits eine gute Freisetzung verzeichnet werden. Die untersuchten Flavonoide zeigten in allen verwendeten Medien eine gute Freisetzung. Der Vergleich verschiedener Präparate ergab starke Unterschiede hinsichtlich ihrer Freisetzungscharakteristik. Dabei ergaben sich Abweichungen sowohl hinsichtlich Geschwindigkeit als auch bezüglich Vollständigkeit der Freisetzung der untersuchten Inhaltsstoffe. Eine Tatsache ist, daß Präparate, die laut Deklaration als pharmazeutisch äquivalent einzustufen wären, sich einerseits im Bezug auf den Gehalt an pharmazeutisch-relevanten Inhaltsstoffen und andererseits auch in ihrem in-vitro-Freisetzungverhalten unterschiedlich verhalten und somit nicht als biopharmazeutisch äquivalent gelten können. Dies läßt den Schluß zu, daß Johnniskrautextrakt-Präparate zur Therapie leichter bis mittelschwerer Depressionen nicht ohne weiteres untereinander ausgetauscht werden sollten. Es ist unumstritten, daß Bedarf an neuen aussagekräftigen Beurteilungsansätzen zur Qualität von Phytopharmaka vorhanden ist. In dieser Arbeit wurde eine neue und verfolgenswerte Idee zur vergleichenden Bewertung der pharmazeutischgalenischen Qualität von Phytopharmaka am Beispiel von Johanniskrautextrakt-Präparaten aufgezeigt.
Standard biorelevant media reflect the average gastrointestinal (GI) physiology in healthy volunteers. The use of biorelevant media in in vitro experiments has become an important strategy to predict drug behaviour in vivo and is often combined with in silico tools in order to simulate drug plasma profiles over time. In addition to the healthy population, the effects of disease state or co-administration of other drugs on plasma profiles must be considered to assure drug efficacy and safety. Thus, there is a need for a more accurate representation of the human GI physiology when it is altered by disease or co-administered drugs in in vitro dissolution experiments.
This thesis focused on the development of biorelevant media and dissolution tests reflecting GI physiology in circumstances where the gastric pH is elevated. Diseases linked to an elevated gastric pH are hypochlorhydria and achlorhydria, but these days treatment with acid-reducing agents (ARAs) is the single greatest cause of elevation in gastric pH. pH-dependent drug-drug interactions (DDIs) with ARAs are frequent, as the ARAs are used in a number of diseases using a variety of drugs. As the drugs currently on the market are often poorly soluble and ionisable, their dissolution is highly dependent on the pH of the GI tract, especially the gastric pH.
The thesis research consisted of several steps. In the first step, physiological changes in the human GI tract during the therapy with ARAs were identified. Parameters of the standard biorelevant gastric medium FaSSGF were adjusted to the identified changes to reflect the impact of ARA co-administration on the gastric physiology. The media aim to assess the potential extent of the ARA impact on gastric physiology by introducing biorelevant media pairs, ARA pH 4 and pH 6 media, of which one reflects a lesser, and the other a stronger impact of ARAs.
In the second step these ARA media were implemented in in vitro dissolution set-ups.
The dissolution of poorly soluble ionisable drugs was assessed using one-stage, two-stage and transfer model set-ups, as well as using a more evolved in vitro system TIM-1. Comparison of results from dissolution set-ups using the standard, low pH, gastric biorelevant medium FaSSGF (pH 1.6 or 2), and the same set-ups using ARA pH 4 and pH 6 media, shows a decrease in dissolution rate and extent for weakly basic compounds PSWB 001 and dipyridamole, and an increase in rate and extent of dissolution for the weakly acidic compound raltegravir potassium, when the gastric pH is elevated. Due to different physicochemical properties, the extent of the impact of physiological changes during ARA therapy (when either ARA pH 4 or pH 6 medium is selected) on dissolution varied among the model drugs. Thus, the bracketing approach, which considers a range of the possible ARA co-administration impact on drug dissolution, was confirmed to be best practice in assessing the impact of ARAs.
In the third step, dissolution data from in vitro experiments with ARA media was implemented into in silico models. The predictions using various in silico model approaches in Simcyp™ Simulator (minimal and full PBPK model, dissolution input using DRM and DLM) successfully bracketed in vivo data on drug administration during ARA therapy and correctly predicted an overall decrease in plasma concentration for the two model weakly basic compounds and an increase in plasma concertation for the model weakly acidic compound.
In all assessed scenarios, the ARA methods proved to be an essential part of evaluating and predicting the impact of ARAs on drug pharmacokinetics, and appropriately predicted the extent of a possible impact of ARAs on the drug plasma profiles. Thus, the ARA biorelevant media and dissolution tests were demonstrated to be valuable tools reflecting administration of drugs when the gastric pH is elevated and able to predict the impact of ARA therapy on drug administration.
The ability to evaluate the impact of human (patho) physioloy on drug behaviour in the gastrointestinal tract is of great importance, as the GI conditions play a significant role in drug release and absorption. Thus, there is great interest on the part of the pharmaceutical industry and regulatory agencies to develop best practices in this field, especially for pH-dependent DDIs. The media and dissolution tests developed in this thesis are biorelevant methods appropriate for evaluation of the impact of elevated gastric pH on drug efficacy and safety. Such methods, used as a risk assessment tool, in connection with evaluation of the efficacy window and potential toxicity, may help to increase confidence about decisions as to whether a pH-effect will occur and whether it is relevant or not, prior to conducting clinical studies. They may also enable changes in inclusion/exclusion criteria during recruiting for large-scale efficacy trials. In fact, the biopharmaceutic approach to drug development is becoming standard practice on a number of fronts, including metabolic DDIs, renal and hepatic insufficiency, powering decision-making process and possibly even waiving certain types of clinical studies.
...
Since combinatorial chemistry and high throughput screening have become a common technique in the drug discovery phase the number of compounds being considered has increased frequently. These structures are often characterized by high molecular weight, high lipophilicity and low solubility in aqueous and physiological media. Due to the generally poor bioavailability, new in vitro techniques were needed for screening of pharmacokinetic properties. An important parameter for these screening methods is the implementation at an early state of drug discovery phase, to find potential lead structures, before investment costs become significant. The established in vitro methods for the prediction of membrane interaction are not reliable especially for poorly soluble compounds. A new method that is fast and easy to use, requires only small amounts of NCE and which can provide more reliable predictions is needed. In this study, a new screening technique based on surface activity profiling for the prediction of oral drug absorption was evaluated with special emphasis on the predictability of biological membrane interaction of poorly soluble drug compounds. It was demonstrated that drug absorption through a bilayer membrane can be modeled by the orientation of compounds at the air/water interface. Thus amphilicity of a drug is generally related to both oral absorption and blood brain barrier penetration. In turn, amphiphilicity is influenced by the lipophilicity, size and charge distribution of a drug. Surface activity profiling was determined by analysis of surface pressure profiles using the Gibbs adsorption isotherm. The surface activity measurements were carried out using a multichannel tensiometer Delta 8, which was developed by Kibron to be utilized in conjugation high throughput screening in early drug discovery processes. For this study two test sets were analyzed, one for the prediction of gastrointestinal wall interaction and the second for the prediction of the penetration behavior at the blood brain barrier. Both test sets consist of drug compounds with a wide range of absorption properties and consist mainly of compounds with poor water solubility. Since the drugs characteristics varied, they were classified according to water solubility and surface activity and a sample preparation method for each group was established. For the prediction of oral drug absorption, three different methods were established to model the interaction of compound and gastrointestinal wall. For drug compounds with solubility above 1mmol/L the traditional shake-flask method enabled the determination of the amphiphilic properties of drug compounds in pure aqueous media. Compounds with solubility below 1mmol/L tend to not to exhibit any increase in surface activity. Thus surface tension measurements of compounds, which exhibited a limited surface activity due to poor aqueous solubility, were conducted from stock solutions prepared with various organic solvents. Mainly polar organic solvents were used. A mixture of DMSO and DMF resulted in the best combination of properties: the intensive solubility enhancing effect of DMF and the lower intrinsic surface activity of DMSO. The polar solvent ruptured the water clusters, so that highly lipophilic structures had a higher affinity to the solvent and higher concentrations could be obtained. For these compounds higher maximum surface pressure were generated than was possible in pure aqueous media. The surface pressure data were correlated with the fraction absorbed values in vivo. However it was found that poor water solubility is not the only limiting step to exhibiting any surface activity. Some compounds were showed no surface activity in either solvent system. Therefore a micelle vehicle method was established using short chain phospholipids to mimic the gastrointestinal wall. It could be concluded from the results, that non surface active drugs can interact with the phospholipids micelle vehicle in a way analogous to their interaction with the membrane bilayer. The relative critical micelle concentration was correlated with the fraction absorbed of this test set. A sample preparation schema based on the three types of drugs was established. This schema enabled us to predict the absorbance of slightly soluble and poorly soluble drugs with acceptable reliability for early compound screening. For the prediction of blood brain barrier penetration using surface activity profiling as analyzing method, a test set with very poorly soluble characteristics was chosen. The sample preparation method was based on a strictly aqueous approach using the ‘shake flask’ method. The surface tension measurements enabled correlation of the amphiphilic properties of the very poorly soluble drug compounds with BBB uptake. From the aqueous surface pressure profiles and the determination of physicochemical parameters, it was found that blood brain barrier is more likely when a drug provides a small cross-sectional area, As, at the interface. The cross-sectional area is the only parameter which is independent from the maximal concentration in aqueous media and it is particularly suitable for lower solubility compounds. In summary, it was shown that amphilicity is related to biological membrane interaction in the human body and that surface activity profiling with appropriate sample preparation can be used as a reliable screening tool for the prediction of oral drug absorption of poorly soluble drugs. Furthermore an in vitro screening method of blood-brain-barrier penetration was established.
Die vorliegende Dissertation stellt eine Methode zur Löslichkeitsbestimmung vor, die für die Anwendung im Rahmen von BCS-Biowaiver Monografien entwickelt wurde. Der Methode und dem dafür konzipierten Studienprotokoll liegt das Prinzip der „Minimallöslichkeit“ zugrunde. Damit lässt sich einfach, kosteneffizient und wissenschaftlich verlässlich feststellen, ob ein Arzneistoff „hochlöslich“ gemäß den BCS-Biowaiver Richtlinien der Gesundheitsbehörden FDA, EMA und WHO ist und sich dementsprechend generische Produkte des Arzneistoffs grundsätzlich für das BCS-Biowaiver Zulassungsverfahren eignen.
Dieses Verfahren für die Zulassung von Generika erlaubt die Beurteilung der Bioäquivalenz eines festen generischen Arzneimittels zur peroralen Anwendung auf Basis von in vitro-Freisetzungsuntersuchungen anstatt von in vivo-Studien wie z.B. pharmakokinetischen Studien am Menschen und erleichtert dadurch eine Marktzulassung sowohl durch Zeit- als auch Kosteneinsparung. Die Anwendung des Verfahrens ist von Vorteil, um die Verfügbarkeit von qualitativ hochwertigen, generischen (und damit kostengünstigen) Arzneimitteln zu erhöhen. Dies ist besonders wünschenswert für die Verfügbarkeit von gemäß der Weltgesundheitsorganisation essenziellen Arzneistoffen und unter denen gerade von solchen, die zur Bekämpfung von Krankheiten mit nur wenigen und/oder teuren therapeutischen Alternativen benötigt werden.
Entstanden ist die Löslichkeitsbestimmungsmethode im Rahmen von zwei Projekten, die beide zu diesem Ziel einer guten globalen Gesundheitsversorgung beitragen: die Erstellung der Biowaiver Monografien von Proguanilhydrochlorid (ein Malaria-Prophylaktikum) und Cefalexinmonohydrat (ein Antibiotikum aus der Gruppe der Cephalosporine) setzt die Publikationsreihe „Biowaiver Monograph Series“ der FIP Focus Group „Bioclassification/Biowaiver“ fort. Jede Monografie gibt eine umfassende wissenschaftliche Empfehlung zur Eignung eines Wirkstoffs der WHO „Model List of Essential Medicines“ und seiner generischen Produkte für das BCS-Biowaiver Verfahren hinsichtlich aller regulatorisch geforderten Aspekte ab. Proguanilhydrochlorid (BCS Klasse III – „hochlöslich“ und nicht „hoch permeabel“) und Cefalexinmonohydrat (BCS Klasse I – „hochlöslich“ und „hoch permeabel“) sind beide für dieses Zulassungsverfahren geeignet.
Im Zuge des anderen Projektes wurde die Löslichkeit und anschließend die BCS Klasse von Wirkstoffen bestimmt, die der 16. und 17. Version der WHO „Model List of Essential Medicines“ neu hinzugefügt wurden. Neun von 16 untersuchten Wirkstoffen, die in feste, perorale Arzneimittel formuliert werden können, sind im Hinblick auf ihre BCS Klasse für das eine Zulassung per BCS-Biowaiver geeignet. Eine umfangreichere Empfehlung könnte im Rahmen einer Biowaiver Monografie gegeben werden.
Die experimentelle Bestimmung der Löslichkeit über einen pH-Wert-Bereich von 1-6,8 war essenzieller Bestandteil beider Projekte, da Literaturdaten zur Löslichkeit der Wirkstoffe nicht oder nur unvollständig vorlagen. Die entwickelte Methode basiert auf einer im Kleinmaßstab angesetzten „Shake-Flask“-Methode zur Bestimmung der thermodynamischen Löslichkeit, wird jedoch in einem Zeitrahmen von 24 Stunden durchgeführt. Sie nutzt die höchste Dosis der Wirkstoffe als Substanzmenge, um zu bestimmen, ob dieser „hochlöslich“ gemäß den BCS-Biowaiver Richtlinien ist oder nicht. Die Methode bzw. das dazugehörige Studienprotokoll beinhalten Empfehlungen zu den einzelnen Schritten der Durchführung, der Auswahl der Medien und Herausforderungen wie Präzipitation (Fallbeispiel: Proguanilhydrochlorid) und Zersetzungsreaktionen (Fallbeispiel: Cefalexinmonohydrat). Löslichkeitsdaten, die mit dieser Methode erhoben werden, können für eine Zulassung per BCS-Biowaiver bei den Gesundheitsbehörden eingereicht werden, aber auch für ein Vorab-Screening genutzt werden, dass „hochlösliche“ Arzneistoffe aus einer Vielzahl von Substanzen herauszufiltern soll, um nähere Untersuchungen im Rahmen einer Biowaiver Monografie anzuschließen.