Refine
Year of publication
Document Type
- Article (11)
- Conference Proceeding (5)
- Working Paper (2)
- Lecture (1)
- Report (1)
Language
- English (20) (remove)
Has Fulltext
- yes (20)
Is part of the Bibliography
- no (20)
Keywords
Institute
- Physik (18)
- Biowissenschaften (1)
- LOEWE-Schwerpunkt für Integrative Pilzforschung (1)
- Medizin (1)
To preserve the required beam quality in an e+/e- collider it is necessary to have a very precise beam position control at each accelerating cavity. An elegant method to avoid additional length and beam disturbance is the usage of signals from existing HOM-dampers. The magnitude of the displacement is derived from the amplitude of a dipole mode whereas the sign follows from the phase comparison of a dipole and a monopole HOM. To check the performance of the system, a measurement setup has been built with an antenna which can be moved with micrometer resolution to simulate the beam. Furthermore we have developed a signal processing to determine the absolute beam displacement. Measurements on the HOM-damper cell can be done in the frequency domain using a network analyser. Final measurements with the nonlinear time dependent signal processing circuit has to be done with very short electric pulses simulating electron bunches. Thus, we have designed a sub nanosecond pulse generator using a clipping line and the step recovery effect of a diode. The measurement can be done with a resolution of about 10 micrometers. Measurements and numerical calculations concerning the monitor design and the pulse generator are presented.
Damping cells for the higher order modes are necessary for the S-band linear collider to minimize BBU (Beam-Break-Up). The construction of the damper cells has to take into account the different field geometries of the higher order modes. So two different types of dampers have been designed: a wall slotted an an iris slotted cell. In order to optimize the two types of damping cells with respect to damping strength, impedance matching between coupling system and waveguide dampers and between damping cell and undamped cells and the tuning system, damping cells of both types have been built and examinated.
By replacing the irises in an electron linac by a slit one gets a structure capable of focussing/defocussing an electron beam (rf-quadrupoles). Therefore one can think of a combination of rf- and conventional magnetic quadrupoles for transversal focussing in linear-colliders. Furthermore they can meet the demands of BNS-damping without initial energy spread. Considering multibunch-operation of a collider, the long-range wake behaviour of this kind of structure has to be investigated. A three-cell structure has been built and investigated for dipole-type transversal long-range wakes. The experimental results are compared to numerical simulations done with MAFIA.
To reach high luminosities in future linear colliders short range wakes havea to be controlled in the range of X-band frequencies or higher. Rectangular irises can be used to introduce strong focusing quadrupole-like rf-fields. Even circular irises in iris-loaded accelarator structures have the capability of focusing if the particle velocity differs from phase velocity. Theoretical investigations concerning the focusing strength to be expected are presented. Their applicability for linear colliders is discussed.
Mode propagation in an iris type accelerator section loaded with single heavily HOM-damped cells
(1994)
The wakefield effects in accelerator sections for future linear colliders will be reduced either by damping by detuning or by a combination of both. For the DESY/THD linac [1] it is forseen to employ heavily HOM-damped cells to provide a strong coupling to the TE/TM11-dipole passband as well as to the TM/TE11-dipole passband. For our experiments we have used wall-slotted damping cells. This leads to several problems concerning the propagation of fundamental and HOM-modes. Experimental investigations have been done. Results are presented.
The effect of a single HOM-damper cell within a channel of undamped cells is described theoretically using an equivalent circuit model. From this a simple equation can be derived which relates the Q-value of the single damping-cell, the bandwidth of the passband under consideration, and the additional phase shift which is introduced by the damper cell to provide energy flow into the damper cell. This equation immediately shows the limitations of such single cell damping systems. Comparisons with experimental results are shown.
The operation of a Free Electron Laser (FEL) in the ultraviolet or in the X-ray regime requires the acceleration of electron bunches with an rms length of 25 to 50 mikrometer. The wakefields generated by these sub picosecond bunches extend into the frequency range well beyond the threshold for Cooper pair breakup (about 750 GHz) in superconducting niobium at 2 K. It is shown, that the superconducting cavities can indeed be operated with 25 mikrometer bunches without suffering a breakdown of superconductivity (quench), however at the price of a reduced quality factor and an increased heat transfer to the superfluid helium bath. This was first shown by wakefield calculations based on the diffraction model [1]. In the meantime a more conventional method of computing wake fields in the time domain by numerical methods was developed and used for the wakefield calculations [2]. Both methods lead to comparable results: the operation of TESLA with 25 mikrometer bunches is possible but leads to an additional heat load due to the higher order modes (HOMs). Therefore HOM dampers for these high frequencies are under construction [3]. These dampers are located in the beam pipes between the 9-cell cavities. So it is of interest, if there are trapped modes in the cavity due to closed photon orbits. In this paper we investigate the existence of trapped modes and the distribution of heat load over the surface of the TESLA cavity by numerical photon tracking.
A new method of measuring quality factors in cavities is presented. This method is well suited to measure quality factors in undamped cavities as well as in heavily damped cavities, and in addition this method provides a possibility of separating modes and measuring quality factors especially in cases of overlapping modes. Measurements have been carried out on HOM-damped cavities for the DESY/THD linear collider project. Results are presented.
A new method for measuring quality factors in cavities is presented. This method is capable of measuring Q-factors in heavily damped as well as in undamped cavities. In addition, the possibility of separating overlapping modes and measuring their Q-factors is provided. Measurements on HOM (higher order mode) damped cavities for the DESY/THD linear collider project are presented