Refine
Year of publication
Document Type
- Doctoral Thesis (34) (remove)
Language
- English (34) (remove)
Has Fulltext
- yes (34)
Is part of the Bibliography
- no (34) (remove)
Keywords
- Adaptation (1)
- Biomineralization (1)
- COVID-19 lockdown (1)
- Carbonate (1)
- Carbonated apatite (1)
- Chemistry (1)
- Climate Change (1)
- Climate System, Climate Models, Information theory (1)
- Clumped isotopes (1)
- Dynamics (1)
Institute
- Geowissenschaften / Geographie (34) (remove)
Ob Klimawandel oder Luftverschmutzung: Die chemischen und physikalischen Prozesse in der Atmosphäre haben wichtige Auswirkungen auf die menschliche Gesundheit und Ökosysteme. Dabei ist die Atmosphäre mehr als ein Gemisch aus Stickstoff, Sauerstoff, Wasserdampf, Helium und Kohlenstoffdioxid. Es gibt zahlreiche Spurengase, deren Gesamtanteil am Volumen weniger als 1 % ausmacht. In dieser Arbeit werden Stickstoffoxide, Schwefeldioxid, Kohlenstoffmonoxid und Schwefelsäure näher betrachtet, die im Rahmen der flugzeugbasierten Messkampagne Chemistry of the Atmosphere: field experiment in Europe (CAFE-EU)/BLUESKY gemessen wurden.
Die Stickstoffoxide NO und NO2, als NOx zusammengefasst, besitzen hauptsächlich anthropogene Quellen, allen voran fossile Verbrennung und industrielle Prozesse. Zwischen NO und NO2 besteht ein photochemisches Gleichgewicht, sodass in der Atmosphäre vor allem NO2 in relevanten Konzentrationen vorkommt; dies wirkt aufgrund der Bildung von Salpetersäure, HNO3, in wässriger Lösung beim Einatmen ätzend und ist entsprechend gesundheitsschädlich. Troposphärisches Ozon, O3, wesentlicher Bestandteil von Sommersmog, wird hauptsächlich durch die Reaktion von NO mit Peroxiden (HO2 und RO2) gebildet. In der Stratosphäre entstehen NOx hauptsächlich durch die Photodissoziation von Lachgas, N2O, das aufgrund seiner langen Lebenszeit von der Tropo- in die Stratosphäre transportiert werden kann und dort die wichtigste Stickstoffquelle darstellt. In der Stratosphäre tragen NOx zum katalytischen Abbaumechanismus des Ozons bei (Bliefert, 2002; Seinfeld and Pandis, 2016).
Schwefeldioxid, SO2, ist ein toxisches Gas, dessen atmosphärische Quellen hauptsächlich anthropogen sind, nämlich fossile Verbrennung und industrielle Prozesse; Senken sind trockene und feuchte Deposition, wobei letztere zu saurem Regen führen kann. Seit den 1980ern sinken die globalen SO2-Emissionen. SO2 kann in der Atmosphäre zu Sulfat und Schwefelsäure oxidiert werden, was Hauptbestandteil des Wintersmogs ist. Der wichtigste Mechanismus ist die Oxidation mit dem Hydroxylradikal, OH˙, unter Beteiligung von Wasserdampf. In der Stratosphäre ist Carbonylsulfid, OCS, die wichtigste Schwefelquelle, da es analog zum N2O dank seiner langen Lebenszeit von der Tropo- in die Stratosphäre transportiert werden kann (Bliefert, 2002; Seinfeld und Pandis, 2016). Typische Konzentrationen von Schwefelsäure sind 105 cm–3 nachts und 107 cm–3 tagsüber in der Troposphäre sowie 105 cm–3 tagsüber in der Stratosphäre (Clarke et al., 1999; Weber et al., 1999; Fiedler et al., 2005; Arnold, 2008; Kürten et al., 2016; Berresheim et al., 2000).
Kohlenstoffmonoxid, CO, ist ein toxisches Gas, das zu gleichen Teilen durch direkte Emissionen (v.a. Biomasseverbrennung und fossile Verbrennung) und In-situ-Oxidation (v.a. von Methan, Isopren und industriellen Kohlenwasserstoffen) in die Atmosphäre gelangt. Die Hauptsenke ist die Reaktion mit OH˙ in der Troposphäre. Seit 2000 sinkt die globale CO-Konzentration (Bliefert, 2002).
Doch neben Gasen sind auch Aerosolpartikel fester Bestandteil des Gemisches Luft, welche luftgetragene feste oder flüssige Teilchen sind. Primäre Aerosolpartikel werden direkt als solche in die Atmosphäre emittiert, während sekundäre Aerosolpartikel in der Atmosphäre gebildet werden, indem gasförmige Vorläufersubstanzen mit geringer Flüchtigkeit auf primären Partikeln kondensieren oder durch Zusammenclustern und Anwachsen komplett neue Partikel bilden. Aerosolpartikel ermöglichen als Wolkenkondensationskeime erst die Bildung von Wolken und wirken somit – neben ihrem direkten reflektierenden Effekt – durch Änderung der Wolkenbedeckung und -eigenschaften insgesamt kühlend aufs Klima und beeinflussen die lokalen und globalen Wasserkreisläufe. Doch sie haben auch negative Auswirkungen auf die menschliche Gesundheit und sind für eine Verkürzung der durchschnittlichen Lebensdauer in Regionen mit hohen Feinstaubbelastungen verantwortlich (Seinfeld und Pandis, 2016; Bellouin et al., 2020; World Health Organization, 2016).
Neben den bisher betrachteten neutralen, also ungeladenen Gasen und Partikeln sind Ionen in der Gasphase sowie geladene Partikel ebenfalls Bestandteil der Atmosphäre. Sie spielen bei vielen atmosphärischen Prozessen eine wichtige Rolle, wie etwa bei Gewittern, Radiowellenübertragung und ionen-induzierter Nukleation von Aerosolpartikeln. Die Hauptquellen für Ionisation in der Tropo- und Stratosphäre ist die galaktische kosmische Strahlung, die entgegen ihrem Namen hauptsächlich aus Protonen und α-Partikeln (primäre Partikel genannt) besteht und in der Erdatmosphäre durch Kollision mit Luftmolekülen Teilchenschauer von sekundären Partikeln (u.a. Myonen, Pionen und Neutrinos) hervorruft. Die primären und sekundären Partikel können die Luftmoleküle ionisieren unter Entstehung von N+, N2+, O+, O2+ und Elektronen. Sauerstoff reagiert rasch mit letzteren zu O– und O2–. Diese Kationen und Anionen reagieren weiter, bis Ionenclustern der Summenformeln (HNO3)n(H2O)mNO3– und H+(H2O)n(B)m gebildet werden, wobei B Basen wie Methanol, Aceton, Ammoniak oder Pyridin sind. Weitere Ionisationsquellen sind der Zerfall des Radioisotops 222Rn in Bodennähe und ionisierende Solarstrahlung oberhalb der Stratosphäre. Atmosphärische Ionen haben zwei wichtige Senken: die Wiedervereinigung, auch Rekombination genannt, bei der sich ein Kation und ein Anion gegenseitig neutralisieren sowie das Anhaften an Aerosolpartikeln. Letztere Senke ist vor allem in der Troposphäre aufgrund der relativ hohen Konzentration an Aerosolpartikeln relevant (Arnold, 2008; Viggiano und Arnold, 1995; Bazilevskaya et al., 2008; Hirsikko et al., 2011).
In this dissertation, different aspects of turbulent transport and thermally driven flows over complex terrain are investigated. Two publications concentrate on the vertical heat and moisture exchange in the convective boundary layer over mountainous terrain. To study this, Large-Eddy Simulation (LES) is used. Both turbulent and advective transport mechanisms are evaluated over the simple orography of a quasi-two-dimensional, periodic valley with prescribed surface fluxes. Here, terrain elevation varies along only one of the horizontal coordinate axes. Even a relatively shallow orography, possibly unresolved in existing numerical weather prediction models, modifies the domain-averaged moisture and temperature profiles. For the analysis, the flow is decomposed into a local turbulent part, a local mean circulation, and a large-scale part. An analysis of the turbulent kinetic energy and turbulent heat and moisture flux budgets shows that the thermal circulation significantly contributes to the vertical transport. It is found that thermal upslope winds are important for the moisture transport from the valley to the mountain tops. In total, moisture export out of the valley is mostly accomplished by the mean circulation. On the temperature distribution, which is horizontally relatively homogeneous, the thermal circulation has a weaker impact. If an upper-level wind is present, it interacts with the thermal circulation. This weakens the vertical transport of moisture and thus reduces its export out of the valley. The heat transport is less affected by the upper-level wind because of its weaker dependence on the thermal circulation. These findings were corroborated in a more realistic experiment simulating the full diurnal cycle using radiation forcing and an interactive land surface model.
Based on these results, coherent turbulent structures in the convective boundary layer over non-flat terrain are studied in further detail. A conditional sampling method based on the concentration of a decaying passive tracer is implemented in order to identify the boundary-layer plumes objectively. Conditional sampling allows to quantify the contribution of plume structures to the vertical transport of heat and moisture. In case of the idealized valley, vertical transport by coherent structures is the dominant contribution to the turbulent components of both heat and moisture flux. It is comparable in magnitude to the advective transport by the mean slope-wind circulation, although it is more important for heat than for moisture transport. A set of less idealized simulations considers the flow over three-dimensional terrain. In this case, conditional sampling is carried out by using a simple domain-decomposition approach. We demonstrate that thermal updrafts are generally more frequent on hill tops than over the surroundings, but they are less persistent on the windward sides when large-scale winds are present in the free atmosphere.
The tools for flow decomposition and budget analysis are also applied in another idealized case with a quasi-two-dimensional valley featuring the stable boundary layer. Here, the formation of a low stratus cloud is investigated. The main driver for the cloud formation is radiative cooling due to outgoing longwave radiation. Despite a purely horizontal flow, the advection terms in the prognostic equations for heat and moisture produce vertical mixing across the upper cloud edge leading to a loss of cloud water content. However, this behavior is not due to any kind of thermally-driven circulation. Instead, this spurious mixing is caused by the diffusive error of the advection scheme in regions where the sloping surfaces of the terrain-following vertical coordinate intersect the cloud top. It is shown that the intensity of the (spurious) numerical diffusion strongly depends on the horizontal resolution, the order of advection, and the choice of the scalar advection scheme. A LES with 4 m horizontal resolution serves as a reference. For horizontal resolutions of a few hundred meters, carried out with a model setup as it is used in Numerical Weather Prediction, a strong reduction of the simulated liquid-water path is observed. In order to keep the (spurious) numerical diffusion at coarser resolutions small, at least a fifth-order advection scheme should be used. In the present case, a WENO scalar advection scheme turns out to increase the numerical diffusion along a sharp cloud edge compared to an upwind scheme. Furthermore, the choice of the vertical coordinate has a strong impact on the simulated liquid-water path over orography. With a modified definition of the terrain-following sigma coordinate, it is possible to produce cloud water where the classical sigma coordinate does not allow any cloud formation.
During the last decades mammalian intracranial structures like the ethmoidal region have rarely been a focus of morphological studies, as they required invasive techniques. Contrary, the ontogeny of the fetal nasal capsule could easily be investigated based on histological material. Since the early 21st century modern imaging techniques like high-resolution computed tomography (μCT) reveal non-destructive insights into the mammalian skull. Furthermore, visualization software enables the virtual reconstruction of the tissues and additionally their morphometric analyses. However, the use of morphometric approaches on the nasal cavity is still scarce. Moreover, the turbinal skeleton is generally regarded as a unit, or the rostral respiratory part is compared to the caudal olfactory part; but the distinct olfactory turbinals have been considered only in a few studies.
The present study focuses on the highly diverse facial shape of the dog (Canis lupus familiaris) that evolved during domestication. Due to human-controlled breeding and care the natural selective pressure in prehistoric dogs has been replaced continually by artificial selection. As a consequence, harmful mutations on gene loci which e.g., control facial length growth got fixed within an extremely short time. According to veterinarian studies the turbinals of short snouted breeds continue their growth after the elongation of the facial bones has stopped prematurely. However, such investigations are based on low-resolution CT or MRT data and the morphological descriptions are vague. Referring to the elongation of the face in dolichocephalic breeds no former study has dealt with the detailed morphology of their turbinal skeleton so far.
The current study is based on comparative anatomical, morphometric, morphofunctional, and ontogenetic patterns of the dog’s turbinal skeleton. The 32 macerated skulls and four histological serial sections represent eleven breeds which cover different snout lengths (brachycephalic, mesaticephalic, dolichocephalic; according to two length indices), functional groups (scent hound, sighthound, companion/toy), and breeding histories (ancient pure-breeding associated with an unchanged appearance, modern time fashion breeding). The nasal cavity of the selected skulls was μCT-scanned and virtual 3D models of the turbinal skeleton were reconstructed. The breeds have been compared with each other in their number of olfactory turbinals, in the morphology of all turbinals and the lamina semicircularis as well as in their morphometrics and ontogeny. Based on morphological and ontogenetic patterns a new terminology of the interturbinals was established. The morphometric data covers the measurement of the relative turbinal surface area (IAT) and the calculation of the surface density (SDEN) and the turbinal complexity (TC). For the latter parameter a new morphometric approach was developed. For the ontogenetic comparison histological serial sections of perinatal dog stages have been consulted. As the dog’s ancestor macerated skulls of three adult Eurasian wolves (Canis lupus lupus) function for outgroup comparison and represent the grundplan with which the breeds are compared.
The results support former studies concerning a species-specific number of the fronto- and ethmoturbinals: in the Eurasian wolf and all postnatal dogs under study three ethmoturbinals and three frontoturbinals are observed. Additionally, two types of interturbinals are distinguished, namely four prominent interturbinals which are present in nearly all individuals and show a homologous pattern, and a variable number of additional interturbinals which differ in their shape among the dogs. Generally, longer snouted breeds have more additional interturbinals, so the total number of olfactory turbinals is increased to a maximum of 16 in the borzoi, whereas several short snouted breeds have only nine olfactory turbinals due to the loss of additional interturbinals and one prominent interturbinal. Regarding ontogeny the growth of the respiratory and the olfactory turbinals and the lamina semicircularis is highly associated with the growth of the facial bones after birth. As the viscerocranium of brachycephalic breeds is subjected to a postnatal growth inhibition the ethmoidal region stops growing prematurely, too. The turbinals of both functional parts develop less accessory lamellae that results in the reduction of the three morphometric parameters IAT, SDEN, and TC. The increase of all these three parameters with increasing snout length proves a correlation between both variables in the maxilloturbinal, all olfactory turbinals, and the lamina semicircularis in the dog. With the help of the perinatal dog stages plesiomorphic patterns which are present in all adult specimens (e.g., separation of ethmoturbinal I into two laminae, the presence of the uncinate process) were distinguished from less established morphological traits which get preferably reduced in association with brachycephaly (e.g., the anterior process of the posterior lamina of ethmoturbinal I, the caudal processes of frontoturbinal 1 and 2 within the frontal sinus due to the latter’s reduction). Obviously, the driving mechanism behind these and further variations are mutations on gene loci which control ontogenetic processes: the in other studies already described postnatal growth inhibition in the dermal bones of the midface of brachycephalic breeds seems to have a similar effect on the ethmoidal region. The results of the present study serve as basis for the evaluation how far the bony turbinals’ morphology, morphometrics, and ontogeny might be associated with physiological, genetic, neurological, and phylogenetic patterns. Additionally, the growth patterns of the hard tissues need to be compared to those of the soft tissues (i.e. the nasal epithelium).
As part of two drilling campaigns of the International Continental Scientific Drilling Program (ICDP), several geophysical borehole measurements were carried out by the Leibniz Institute for Applied Geophysics (LIAG) in two lakes. The acquired data was used to answer stratigraphic and paleoclimatic research questions, including the establishment of robust age-depth models and the construction of continuous lithological profiles.
Lake Towuti is located on Sulawesi (Indonesia), within the "Indo-Pacific Warm Pool" (IPWP), a globally important region for atmospheric heat and moisture budgets. The lake exists for approximately one million years, but its exact age is uncertain. We present the first agedepth model for the approximately 100 m continuous sediment sequence from the central part of the lake. The basis for this model is the magnetic susceptibility measured in the borehole and a tephra layer with an age of about 797 ka at 72 m depth. Our age-depth model is inferred from cyclostratigraphic analysis of borehole data and covers a period from 903 ± 11 to 131 ± 67 ka. We suggest that orbital eccentricity and/or changes between global cold and warm periods are responsible for hydroclimatic changes in the IPWP, that these changes affect sedimentation processes in Lake Towuti, and that we can measure and observe this effect in the sediment properties today. Additionally, we created a continuous artificial lithological profile from a series of different borehole data using cluster analysis. This provides information from parts of the borehole where no sediment is available due to core loss.
Lake Ohrid is 1.36 million years old and is located on the Balkan Peninsula on the border between Albania and North Macedonia. The primary hole 'DEEP' in the central part of the lake has been the subject of several investigations, but information about sediments of the marginal locations 'Pestani' and 'Cerava' have not been published yet. In our study, we use natural gamma radiation (GR) measured in the borehole to generate an age-depth model for DEEP. This is performed using the correlation of GR to the global LR04 reference record of Lisiecki and Raymo (2005).
The age information is then transferred via prominent seismic marker horizons to the other two sites, Pestani and Cerava, where it provides the first age-control points for the construction of age-depth models from correlation of GR to LR04. The generated age-depth models are tested using cyclostratigraphic methods, but the limits of this approach are revealed. At DEEP, sedimentation rates (SR) from the cyclostratigraphic method and the correlative approach differ by 2.8 %, at Pestani this difference is 16.7 %, and at Cerava the quality of the data does not allow a reliable evaluation of SR using the cyclostratigraphic approach. We used cluster analysis to construct artificial lithological profiles at all three sites and integrated them into the respective age-depth models. This enables us to determine which sediment types were deposited at what time, and we recognize the change between warm and cold periods in the sediment properties at all three locations. The analyses in this study were all performed on borehole and seismic data and thus do not involve sediment core data. Especially at Pestani and Cerava, new insights into the sedimentological history of Lake Ohrid could be obtained.
In the last part we discuss the occurrence of the half-precession (HP) signal in the European region during the last one million years. The focus is on Lake Ohrid, but a range of other proxies, from the eastern Mediterranean, across the European continent, up to Greenland are analyzed in regards to HP. Applying filters, we focus on the frequency range with a period of 13-8.5 ka and only HP remains in the records. We use correlative methods to determine the clarity of the HP signal in proxies distributed across the European realm. Additionally, we determined the development of HP over time. The HP signal is clearest in the southeast and decreases toward the north. It is further more pronounced in interglacial periods and in the younger part (<621 ka) of most proxies. We suggest that there are mechanisms that transmit the HP signal from its origin near the equator to higher latitudes via different processes. In this context, for instance, the African monsoon, the Nile River and the Mediterranean outflow via the Strait of Gibraltar can be important factors.
Upper mantle shear zones are complex systems where deformation is commonly closely interacting with metamorphic (solid-solid) and/or melt/fluid-rock reactions. Here, feedback processes between deformation, reactions, grain size reduction and phase mixing result in strain weakening and the localization of deformation. The expression of these interlinked processes is portrayed by the microfabrics of strained peridotites and pyroxenites. The present thesis is focusing on these processes and their impact on the deformation in three upper mantle shear zones situated in the peridotite massifs of Lanzo (Italian Alps), Erro-Tobbio (Italian Alps) and Ronda (Betic Cordillera, Spain). In all three shear zones, the presence of melt led to phase mixing either by interstitial crystallization of pyroxenes from a Si-saturated and partially also highly evolved melt or by melt-rock reactions of pyroxene porphyroclasts with a Si-undersaturated melt. The effect of melt on the localization of strain is twofold and variable. Enhanced deformation by melt-wetted boundaries is assumed for all shear zones. Additionally, phase mixing by crystallization of interstitial pyroxenes or melt-rock reactions reduce or maintain the grain size by the formation of fine grained neoblasts and secondary phase boundary pinning. In this regard, pre- to early syn-kinematic, map-scale percolation of OH-bearing, evolved melts in the NW Ronda peridotite massif and the associated crystallization of interstitial pyroxenes result in the activation of grain size sensitive deformation mechanisms in the entire melt-effected area. In the rocks collected at Erro-Tobbio, syn-kinematic melt-rock reactions of pyroxene porphyroclasts and Si-undersaturated melt led to the formation of ultramylonitic neoblast tails (grain size ~10 μm). Compared to the adjacent coarser-grained olivine-dominated matrix, the activation of diffusion creep led to an increase in the strain rate by an order of magnitude within interconnected ultramylonitic layers. Strain localization and softening in ultramylonitic layers are also documented in the Lanzo samples. Neoblast tails of pyroxene porphyroclasts were likewise identified as their precursor. The phase assemblage of the tails, including ortho- and clinopyroxene, olivine, plagioclase, and spinel (± amphibole), and their geochemical trends suggest, unlike in Erro-Tobbio, a formation by continuous net-transfer reactions enhanced by the spinel lherzolite to plagioclase lherzolite transition.
The new results obtained from the three studied shear zones underscore the importance of reactions for the interlinked processes of grain size reduction, phase mixing, strain localization and strain softening in upper mantle shear zones. Concerning strain localization, the nature of the reaction (solid-solid, melt/fluid-rock) seems to play a subordinate role compared to its timing. Pre- to early syn-kinematic melt-triggered reactions result in strain localization along map-scale shear zones. Late stage syn-kinematic melt-rock or metamorphic reactions under high stress conditions are capable of localizing the deformation along discrete, sub-centimeter thick ultramylonites.
The weather of the atmospheric boundary layer significantly affects our life on Earth. Thus, a realistic modelling of the atmospheric boundary layer is crucial. Hereby, the processes of the atmospheric boundary layer depend on an accurate representation of the land-atmosphere coupling in the model. In this context the land surface temperature (LST) plays an important role. In this thesis, it is examined if the assimilation of LST can lead to improved estimates of the boundary layer and its processes.
To properly assimilate the LST retrievals, a suitable model equivalent in the weather prediction model is necessary. In the weather forecast model of the German Weather Service used here, the LST is modelled without a vegetation temperature. To compensate for this deficit, two different vegetation parameterizations were investigated and the better one, a conductivity scheme, was implemented. In order to make optimal use of the influence of the assimilation of the LST observation on the model system, it is useful to pass on the information of the observation to land and atmosphere already in the assimilation step. For that reason, a fully coupled land-atmosphere prediction model was used. Therefore, the existing control vector of the assimilation system, a local ensemble transform Kalman filter, was extended by the soil temperature and moisture. In two-day case studies in March and August 2017, different configurations of the augmented assimilation system were evaluated based on observing system simulation experiments (OSSE).
LST was assimilated hourly over two days in the weakly and strongly coupled assimilation system. In addition, every six hours a free 24-hour forecast was simulated. The experiments were validated with the simulated truth (a high-resolution model run) and compared against an experiment without assimilation. It was shown that the prediction of the boundary layer temperature, especially during the day, and the prediction of the soil temperature, during the whole day and night, could be improved.
The best impact of LST assimilation was achieved with the fully coupled system. The humidity variables of the model benefited only partially from the LST assimilation. For this reason, covariances in the model ensemble were investigated in more detail. To check their compatibility with the high-resolution model run the ensemble consistency score was introduced. It was found that the covariances between the LST and the temperatures of the high-resolution model run were better represented in the ensemble than those between the LST and the humidity variables.
Geochemical investigations on biogenic carbonates are commonly conducted to reconstruct the environmental conditions of the past. However, different carbonate producers incorporate elements to varying degrees, due to biological vital effects. Detecting and quantifying these effects is crucial to produce reliable reconstructions. These paleoreconstructions are of great importance to evaluate the consequences of our recent climate change and identify control mechanisms on the distribution of endangered species such as Desmophyllum pertusum. In chapter three we tested Mg/Ca, Sr/Ca and Na/Ca ratios on this species, among other coldwater scleractinians, to test if they provide reliable proxy information. The results reveal no apparent control of Mg/Ca or Sr/Ca ratios through seawater temperature, salinity or pH. Na/Ca ratios appear to be partly controlled by the seawater temperature, which is also true for other aragonitic organisms such as warm-water corals and the bivalve Mytilus edulis. However, a large variability complicates possible reconstructions by means of Na/Ca. In addition, we explore different models to explain the apparent temperature effect on Na/Ca ratios based on temperature sensitive Na and Ca pumping enzymes.
The bivalve Acesta excavata is commonly found in cold-water coral reefs among the North Atlantic, together with D. pertusum. Multiple linear regression analysis, presented in chapter four, indicates that up to 79% of the elemental variability in Mg/Ca, Sr/Ca and Na/Ca is explainable with temperature and salinity as independent predictor variables. Vital effects, for instance growth rate effects, are evident and make paleoreconstructions not feasible. Furthermore, organic material embedded in the shell, as well as possible stress effects can drastically change the elemental composition. Removal of these organic matrices from bulk samples for LA-ICP-MS (laser ablation inductively coupled mass spectrometer) measurements by means of oxidative cleaning is not possible, but Na/Ca ratios decrease after this cleaning. This is presumably an effect of leaching and not caused by the removal of organic matrices.
Interesting biogeochemical relations were found in the parasitic foraminifera H. sarcophaga. We report Mg/Ca, Sr/Ca, Na/Ca and Mn/Ca ratios measured in H. sarcophaga from two different host species (A. excavata and D. pertusum) in chapter five. Sr/Ca ratios are significantly higher in foraminifera that lived on D. pertusum. This could indicate that dissolved host material is utilized in shell calcification of H. sarcophaga, given the naturally higher strontium concentration in the aragonite of D. pertusum. Mn/Ca ratios are highest in foraminifera that lived on A. excavata but did not fully penetrate the host’s shell. Most likely, this represents a juvenile stadium of the foraminifera during which it feeds on the organic
periostracum of the bivalve, which is enriched in Mn and Fe. The isotopic compositions are similarly affected, both δ18O and δ13C values are significantly lower in foraminifera that lived 23on D. pertusum compared to specimen that lived on A. excavata. Again, this might represent the uptake of dissolved host material or different pH regimes in the calcifying fluid of the hosts (bivalve < 8, coral > 8) that control the extent of hydration/hydroxylation reactions. Temperature reconstructions are possible using stable oxygen isotopes on this foraminifera species; however, the results are only reliable if the foraminifera lived on A. excavata. Samples of H. sarcophaga from D. pertusum would lead to overestimations of the seawater temperature due to the lower δ18O values.
Apart from biological vital effects, storage and preservation methods can significantly change the geochemical composition of different marine biogenic carbonates. In chapter six this is presented on the example of ethanol preservation, a common technique to allow extended storage of biogenic samples. The investigation reveals a significant decrease of Mg/Ca and Na/Ca ratios even after only 45 days storage in ultrapure ethanol. Sr/Ca ratios on the other hand are not influenced.
Besides temperature, salinity and pH further environmental parameters are important such as nutrient availability, especially for the distribution of cold-water corals. In chapter seven we extend the investigations on A. excavata by including the elemental ratios Ba/Ca, Mn/Ca and P/Ca. We expected P/Ca to be helpful in the otherwise difficult process of dentifying growth increments. Based on our observations we had to refute this theory. P/Ca ratios are not systematically enriched in the vicinity of growth lines. Instead, we found a regular sequence of peaks of Ba/Ca, P/Ca and Mn/Ca. This sequence as well as the peaks in general are potentially caused by equential blooms of different algae, diatoms and other planktonic organisms ...
Extreme convective precipitation events are among the most severe hazards in central Europe and are expected to intensify under global warming. However, the degree of intensification and the underlying processes are still uncertain. In this thesis, recent advances in continuous, radar-based precipitation monitoring and convection-permitting climate modeling are used to investigate Lagrangian properties of convective rain cells such as precipitation intensity, cell area, and precipitation sum and their relationship to large-scale, environmental conditions.
Firstly, convective precipitation objects are tracked in a gauge-adjusted radar-data set and the properties of these cells are related to large-scale environmental variables to investigate the observed super-Clausius-Clapeyron (CC) scaling of convective extreme precipitation. The Lagrangian precipitation sum of convective cells increases with dew point temperature at rates well above the CC-rate with increasing rates for higher dew point temperatures. These varying, high rates are caused by a covarying increase of CAPE with dew point temperature as well as the effect of high vertical wind shear causing an increase in cell area and thus precipitation sum. At the same time, cells move faster at high vertical wind shear so that Eulerian scaling rates are lower than Lagrangian but still above the CC-rate. The results show that wind shear and static instability need to be taken into account when transferring precipitation scaling under current climate conditions to future conditions. Secondly, the representation of convective cell properties in the convection-permitting climate model COSMO-CLM is evaluated. The model can simulate the observed frequency distributions of cell properties such as lifetime, area, mean and maximum intensity, and precipitation sum. The increase of area and intensity with lifetime is also well captured despite an underestimation of the intensity of the most severe cells. Furthermore, the model can represent the temperature scaling of intensity, area, and precipitation sum but fails to simulate the observed increase of lifetime. Thus, the model is suitable to study climatologies of convective storms in Germany. Thirdly, two COSMO-CLM projections at the end of the century under emission scenario RCP8.5 were investigated. While the number of convective cells and their lifetime remain approximately constant compared to present conditions, intensity and area increase strongly. The relative increase of intensity and area is largest for the highest percentiles meaning that extreme events intensify the most. The characteristic afternoon maximum of convective precipitation is damped, and shifted to later times of day which leads to an increase of nighttime precipitation in the future. Scaling rates of cell properties with dew point temperature are nearly identical in present and future in the simulation driven by the EC-Earth model which means that the upper limit of cell properties like intensity, area, and precipitation sum could be predicted from near-surface dew point temperature. However, this result could not be reproduced by the simulation driven by MIROC5 and needs further investigation.
The climate system is one of the classical examples of a complex dynamical system consisting of interacting sub-systems through mass, momentum, and energy exchange across various spatial and temporal scales. This thesis aims to detect and quantify sub-component interactions from an information exchange (IE) perspective. For this purpose, IE estimators derived from information theory are explored and applied to the available climate data obtained from observations, reanalysis, global and regional climate models. Specifically, this thesis investigates the usefulness of information theory methods for process-oriented climate model evaluation.
Firstly, methods derived from the concepts of information theory such as transfer entropy and information flow along with their linear and non-linear estimation techniques are initially tested and applied to idealized two-dimensional dynamical systems. The results revealed an expected direction and magnitude of IE providing insights into underlying dynamics. However, as expected the linear estimators are robust for linear systems but fail for non-linear systems. Though the non-linear estimators (kernel and kraskov) showed expected results for all the idealized systems, their free tuning parameters are to be tested for consistent results. Moreover, these methods are sensitive to the available time series length.
A real world example case study involving the dynamics between the Indian and Pacific oceans revealed a physically consistent bi-directional IE. However, unexpected IE was detected in the example of North Atlantic and European air temperatures indicating hidden drivers. Though IE provides insights into system dynamics, the availability of time series length and the system at hand must be carefully taken into account before inferring any possible interpretations of the results.
Quantifying the IE from El-Ni\~{n}o southern oscillation (ENSO) and Indian Ocean Dipole (IOD) to the Indian Summer Monsoon Rainfall (ISMR) with the observational and reanalysis data sets revealed that both ENSO and IOD are synergistic predictors for the inter-annual variability of the ISMR over central India i.e., the monsoon core region. Though the investigated three Global Climate Models (GCM) could not reveal the underlying IE dynamics of ENSO, IOD, and ISMR, a Regional Climate Model (RCM) simulation downscaling one of the GCMs with realistic large scale signals across the lateral boundaries showed good agreement with the observations.
Evaluating a coupled regional climate modeling system driven by two different global data sets with IE estimators revealed significant differences between the process chains linking the north-west Mediterranean sea surface temperatures, evaporation, wind speed, and the Vb-cyclone induced precipitation over Danube, Odra, and Elbe catchments in the historical period (1951-2005). Detailed investigation revealed that the north-west Mediterranean Sea in the coupled regional simulation driven by ERA-20C reanalysis corresponded to the Vb-cyclone precipitation over the three catchments while no such correspondence is noted in the EC-EARTH driven simulation. This discrepancy is attributed to the inheritance of the simulation biases from GCM into the RCM. In the future period (1965-2099), no significant changes in the processes are noted from the simulation.
Overall, this thesis used IE estimators in investigating the underlying dynamics of climate system and climate models. The estimators proved useful in providing insights into climate system dynamics assisting in a process based climate model evaluation.
State-of-the-art climate models contain, to a significant degree, empirical components. In particular, subgrid-scale (SGS) parameterizations are usually highly tuned against observations or high-resolution model data. While this enables the models to minimize the error during hindcasts, it is not guaranteed that it yields a benefit for climate projections because of climate change. In this thesis the Fluctuation-Dissipation theorem (FDT) is used to update the statistics of the system in the presence of an external forcing. If the empirical parameters are tuned objectively to the data (i.e., they depend on the statistics of the data), then they might be updated with the FDT. This ansatz is tested within a framework of a semi-empirical model (SEM) based on the leading variance patterns of a quasigeostrophic three-layer model (QG3LM) and supplemented by a purely data-driven parameterization. We show that the FDT is able to successfully update the tuning parameters of the data-driven SGS closure, resulting in a systematic improvement in model performance in comparison to an untreated SEM. Ideally, SGS parameterizations should contain little to no tuning parameters. Thus, complementary to the FDT approach we investigate a stochastic SGS closure constrained by first principles that is calculated using the stochastic mode reduction (SMR). The SMR allows for an analytic derivation of the SGS closure from the model equations while requiring only minimal tuning. We successfully apply the SMR to the QG3LM and construct the reduced stochastic model (RSM). Furthermore, we show that the RSM is more robust against an external forcing than the SEM. Additionally, we find that, under appropriate conditions, the FDT is able to update the empirical parts of the RSM. Yet, only for the response in mean streamfunction the RSM provides useful results, while the response in covariance of the streamfunction is incorrect for most cases. Nevertheless, we obtain a remarkably accurate response in both moments for the RSM in an idealized setting. In combination with the results of the FDT study this indicates that the considered RSM is too low dimensional and encourages us to investigate the response of larger RSMs in the future.