Refine
Year of publication
Document Type
- Doctoral Thesis (2069) (remove)
Language
- English (2069) (remove)
Has Fulltext
- yes (2069)
Is part of the Bibliography
- no (2069)
Keywords
- ALICE (9)
- Quark-Gluon-Plasma (8)
- Membranproteine (7)
- Geldpolitik (6)
- Proteine (6)
- Apoptosis (5)
- Biochemie (5)
- CERN (5)
- Heavy Ion Collisions (5)
- Immunologie (5)
Institute
- Biowissenschaften (427)
- Physik (381)
- Biochemie und Chemie (282)
- Biochemie, Chemie und Pharmazie (211)
- Medizin (128)
- Pharmazie (92)
- Geowissenschaften (87)
- Informatik und Mathematik (85)
- Informatik (55)
- Mathematik (46)
This Dissertation deals with the development of FAIR-relevant X-ray diagnostics based on the interaction of lasers and particle beams with matter. The associated experimental methods are supposed to be employed in the HIHEX-experiments in the HHT-cave of the GSI Helmholtz Center for Heavy-Ion Research GmbH (GSI) in Phase-0 and in the APPA-cave at the Facility for Antiproton and Ion Research in Darmstadt, Germany.
Diagnostic of high aerial density targets that will be used in FAIR experiments demands intense and highly penetrating X-ray sources. Laser generated well-directe relativistic electron beams that interact with high Z materials is an excellent tool for generation of short-pulse high luminous sources of MeV-gammas.
In pilot experiments carried out at the PHELIX laser system, GSI Darmstadt, relativistic electrons were produced in a long scale plasma of near critical electron density (NCD) by the mechanism of the direct laser acceleration (DLA). Low density polymer foam layers preionised by a well-defined nanosecond laser pulse were used as NCD targets. The analysis of the measured electron spectra showed up to 10- fold increase of the electron "temperature" from T_Hot = 1–2 MeV, measured for the case of the interaction of 1–2 ×10^19 Wcm^(−2) ps-laser pulse with a planar foil, up to 14 MeV for the case when the relativistic laser pulse propagates through the by a ns-pulse preionised foam layer. In this case, up to 80–90 MeV electron energy was registered. An increase of the electron energy was accompanied by a strong increase of the number of relativistic electrons and well-defined directionality of the relativistic electron beam measured to be (12 ±1)° (FWHM). This directionality increases the gamma flux on target by far compared to the soft X-ray sources.
Additionally to laser based active diagnostics, passive techniques involving inherent X-ray fluorescence radiation of projectile and target emitted during heavy-ion target interaction can be used to measure the ion beam distribution on shot. This information is of great importance, since the target size is chosen to be smaller than the beam focus in order to ensure homogeneous heating of the HIHEX-target by the ion beam. High amounts of parasitic radiation and activation of experimental equipment is expected for experiments at the APPA-cave. For this reason, all electronic devices must be placed at a safe distance to the target chamber. In order to transport the signal over a large distance, the X-ray image of the target irradiated by heavy-ions has to be converted into an optical one.
For these purposes, the X-ray Conversion to Optical radiation and Transport (XCOT)-system was developed in the frame of a BMBF-project and commissioned in two beamtimes at the UNILAC, GSI during this work.
In experiments, we observed intense radiation of target atoms (K-shell transitions in Cu at 8–8.3 keV and L-shell transition in Ta) ionised in collisions with heavy ions as well as Doppler-shifted L-shell transitions of Au-projectiles passing through targets. This radiation can be used for monochromatic (dispersive elements like bent crystals) or polychromatic (pinhole) 2D X-ray mapping of the ion beam intensity distribution in the interaction region during the beam-target interaction. We measured the efficiency of the X-ray photon production depending on the target thickness and the number of ions passing through the target. The spatial resolution of the XCOT-system based on the multi-pinhole camera was measured to be (91±17) μm for the image magnification factor M = 2. It was considerably improved by application of a toroidally bent quartz crystal and reached 30 μm at M = 6. This resolution is optimal to image the distribution of a 1mm in diameter ion beam. As next step, the XCOT-system will be tested during the SIS18 beam-time at the HHT-experimental area.
Modern experiments in heavy ion collisions operate with huge data rates that can not be fully stored on the currently available storage devices. Therefore the data flow should be reduced by selecting those collisions that potentially carry the information of the physics interest. The future CBM experiment will have no simple criteria for selecting such collisions and requires the full online reconstruction of the collision topology including reconstruction of short-lived particles.
In this work the KF Particle Finder package for online reconstruction and selection of short-lived particles is proposed and developed. It reconstructs more than 70 decays, covering signals from all the physics cases of the CBM experiment: strange particles, strange resonances, hypernuclei, low mass vector mesons, charmonium, and open-charm particles.
The package is based on the Kalman filter method providing a full set of the particle parameters together with their errors including position, momentum, mass, energy, lifetime, etc. It shows a high quality of the reconstructed particles, high efficiencies, and high signal to background ratios.
The KF Particle Finder is extremely fast for achieving the reconstruction speed of 1.5 ms per minimum-bias AuAu collision at 25 AGeV beam energy on single CPU core. It is fully vectorized and parallelized and shows a strong linear scalability on the many-core architectures of up to 80 cores. It also scales within the First Level Event Selection package on the many-core clusters up to 3200 cores.
The developed KF Particle Finder package is a universal platform for short- lived particle reconstruction, physics analysis and online selection.
Conceptual design of an ALICE Tier-2 centre integrated into a multi-purpose computing facility
(2012)
This thesis discusses the issues and challenges associated with the design and operation of a data analysis facility for a high-energy physics experiment at a multi-purpose computing centre. At the spotlight is a Tier-2 centre of the distributed computing model of the ALICE experiment at the Large Hadron Collider at CERN in Geneva, Switzerland. The design steps, examined in the thesis, include analysis and optimization of the I/O access patterns of the user workload, integration of the storage resources, and development of the techniques for effective system administration and operation of the facility in a shared computing environment. A number of I/O access performance issues on multiple levels of the I/O subsystem, introduced by utilization of hard disks for data storage, have been addressed by the means of exhaustive benchmarking and thorough analysis of the I/O of the user applications in the ALICE software framework. Defining the set of requirements to the storage system, describing the potential performance bottlenecks and single points of failure and examining possible ways to avoid them allows one to develop guidelines for selecting the way how to integrate the storage resources. The solution, how to preserve a specific software stack for the experiment in a shared environment, is presented along with its effects on the user workload performance. The proposal for a flexible model to deploy and operate the ALICE Tier-2 infrastructure and applications in a virtual environment through adoption of the cloud computing technology and the 'Infrastructure as Code' concept completes the thesis. Scientific software applications can be efficiently computed in a virtual environment, and there is an urgent need to adapt the infrastructure for effective usage of cloud resources.
Im Rahmen des FAIR Projektes wurde ein neuartiger Prototyp eines nicht strahlzerstörenden Bunch Struktur Monitors (BSM) am GSI UNILAC entwickelt. Ziel ist es, ein zuverlässiges Diagnosegerät zu entwickeln, welches die longitudinale Struktur der Ionenbunche innerhalb des LINACs untersuchen kann. Notwendig ist hierbei eine effektive Zeitauflösung deutlich unter 100 ps, bei möglichst wenigen Makropuls Mittelungen. Nach der erfolgreichen Inbetriebnahme soll der BSM Prototyp dazu dienen, die Umsetzbarkeit eines weiteren nichtinvasiven Geräts für den geplanten Proton-LINAC bei FAIR mit einer notwendigen Zeitauflösung von 10 ps zu beurteilen.
Die numerische Simulation von Materialien, welche dem Hochstrom-Ionenstrahl ausgesetzt sind, zeigten einen sehr hohen thermischen Stress. Daher wurde der Ansatz eines nicht strahlzerstörenden Diagnosegerätes verfolgt. Das Design beruht auf der Erzeugung von Sekundärelektronen durch Strahl-Restgas Kollisionen im Strahlrohr. Durch das Anlegen eines homogenen Hochspannungspotentials von bis zu -31 kV, wird ein Elektronenstrahl erzeugt, welcher die zeitliche Struktur des Ionenbunches trägt. Die zeitliche Information des Elektronenstrahles wird beim Durchfliegen eines HF-Ablenkers, welcher resonant an die 36 MHz des Beschleunigers gekoppelt ist, in eine räumliche Intensitätsverteilung umgewandelt. Anschließend wird die Elektronenverteilung auf einem bildgebenden MCP-Phosphor-Detektor durch eine CCD-Kamera detektiert und in die Bunch Struktur überführt.
Intensive Untersuchungen der BSM Eigenschaften ergaben eine höchste Auflösung von 37 ±6.3 ps bei gleichzeitig akzeptabler Intensität auf dem MCP-Detektor. Unter anderem wurden auch stabile Einzelschussmessungen durchgeführt, welche für die Profilmessung nur einen einzelnen Makropuls benötigten, statt über typischerweise 8-32 Pulse zu mitteln.
Durch die systematische Manipulation der Bunchlänge durch einen Rebuncher sind nicht gaußförmige Profile von 280 ps bis 650 ps detektiert worden, welche als Studie für eine Emittanzbestimmung genutzt worden sind. In Abhängigkeit des Analyseverfahrens sind Werte von εGauss = 1.42 ±0.14 keV/u ns bis εSD = 3.03 ±0.33 keV/u ns für die Emittanz bestimmt worden.
Des Weiteren ist ein Finite-Elemente Modell erstellt worden, um die Zeitstruktur der Sekundärelektronen innerhalb des elektronenoptischen Systems zu bestimmen. Für das Setup mit der höchsten Auflösung von 37 ps ergab sich eine zusätzliche Zeitverbreiterung von 5.6 ps, welche nur geringfügig die experimentell bestimmte Auflösung verschlechtert.
Der nicht strahlzerstörende BSM liefert eine ausreichend hohe zeitliche Auflösung für detailreiche Untersuchung der longitudinalen Bunchstruktur, ohne negative Einflüsse auf den Ionenstrahl auszuüben. Fortgeschrittene Messungen, wie longitudinale Emittanzbestimmung und Makropulsanalysen, sind möglich und werden dazu beitragen, die LINAC Strukturen besser zu verstehen und weiter zu optimieren.
Obwohl bei der Umsetzung des Arbeitsprinzips für den geplanten Proton-LINAC die veränderten Strahlparameter berücksichtigt werden müssen, zeigen die Ergebnisse, wie die Zeitstrukturuntersuchung und die erreichte Phasenauflösung von 0.5° bei 36 MHz, dass zeitliche Auflösungen bei Aufrechterhaltung der Phasenauflösung von bis zu 10 ps für einen neuen BSM Prototypen möglich sind.
Fuer die schlechte Prognose von Glioblastompatienten mit einer ueberlebenszeit von 9-15 Monaten (Norden and Wen, 2006) ist vor allem die hohe Invasivitaet dieser Tumore verantwortlich. Nach operativer Entfernung des Haupttumors entstehen aus den verbleibenden invadierten Zellen sekundaere Tumore, die sich mitunter ueber weite Bereiche des Hirns verteilen. Des Weitern sind die hochinvasiven Tumorzellen oft resistent gegen Chemo- und Strahlentherapie (Drappatz et al., 2009; Lefranc et al., 2005). In Maustumormodellen und Pateinten konnte zudem gezeigt werden, dass die neuartige antiangiogenetische Therapie zwar das Tumorwachstum verringert, jedoch die Invasivitaet stark erhoeht. (Norden et al., 2008; Ebos et al., 2009; Paez-Ribes et al., 2009). Ueber die Mechanismen die diese hohen Invasivitaet induzieren, ist bislang nur sehr wenig bekannt. Die durch Reduktion von Blutgefaessen steigende Hypoxie des Tumors foerdert die Expression von Matrix-Metalloproteinasen (MMPs). Dies fuehrt zum Abbau der extrazelluaeren Matrix des umgebenden gesunden Gewebes und beguenstigt dadurch die Tumorzellinvasion (Indelicato et al., 2010; Miyazaki et al., 2008; Shyu et al., 2007). Die Umformung des Aktinzytoskeletts und damit die Mobilitaet von Zellen wird vorwiegend durch ein akkurates Zusammenspeil der Rho GTPasen Rac, Rho und Cdc42, kontrolliert (Ridley et al., 2003). Fuer die Organisation von Axonen im Nervensystem und fuer die Blut- und Lymphgefaessbildung wurde gezeigt, dass die Interaktion der Eph-Rezeptortyrosinkinasen und Ihrer Ephrin-Liganden Signalwege induziert, die in die Regulation dieses Zusammenspiels involviert sind (Egea and Klein, 2007; Makinen et al., 2005; Palmer et al., 2002; Sawamiphak et al., 2010). Des Weiteren zeigt die Analyse der Genloci von Eph-Rezeptoren und Ephrinen in verschieden Hirntumoren eine gehaeufte Deletionen des Ephrin-B2-Gens. Die Quantifizierung von Ephrin-B2 mRNA in diesen Tumoren hat ausserdem ergeben, dass mit zunehmender Malignitaet die Expression von Ephrin-B2 sinkt. Aus diesen Gruenden wurden die Untersuchungen in dieser Arbeit auf die Rolle von Ephrin-B2 anhaengigen Signalwegen in der Glioblastomzellinvasion konzentriert. In einem modifiziertem Boyden-Chamber-Assay konnte gezeigt werden, dass das Ephrin-B2 induzierte EphB4 forward signaling und EphB4 induzierte Ephrin-B2 reverse signaling die Invasivitaet der human Glioblastomzelllinien LN-229, G55 und SNB-19 reduziert. In einem Maustumormodel konnte weiterhin gezeigt werden, dass Ephrin-B2 Knock-Out (KO) Astrozytomzellen, im Vergleich zu Wild-Typ (WT) Zellen, Tumore mit einem groesseren Volumen und einer erhoehten Invasivitaet bilden. Da die Expressionslevel fuer die Ephrin-B2 bindenden Rezeptoren EphA4, EphB1 EphB3 und EphB6 auch im adulten Hirn hoch sind (Hafner et al., 2004), weisen diese in vitro und in vivo Ergebnisse auf eine Tumorsupressorfunktion von Ephrin-B2 hin, die durch repulsive Effekte des Ephrin-B2 reverse signaling vermittelte werden koennten. Dies geht mit Erkenntnissen ueber kolorektale Tumore einher (Batlle et al., 2005). Die in einem Sphaeroid-Invasionsassay mit einer EphB-Rezeptoren freien Umgebung beobachtete verminderte Invasion von Ephrin-B2 WT deutet auf eine zusaetzliche invasionsblockierende Rolle der Ephrin-B2-Eph-Rezeptor Interaktion zwischen benachbarten Tumorzellen hin, wie sie auch in Brusttumoren gefunden wurde (Noren et al., 2006). Es scheint als sei Tumorprogression und Invasion erst moeglich, nachdem die Expression von Ephrin-B2 vermindert wurde. Es konnte weiterhin gezeigt werden, dass in hypoxischen Glioblastomzellen die Ephrin-B2 Expression durch die direkte Bindung des den Transkriptionsfaktors ZEB2 an den Ephrin-B2 Promoter reprimiert wird. In einem Weiteren Maustumormodel konnte gezeigt werden, dass die Blockierung der ZEB2 Expression mittels shRNA und die damit einhergehenden Inhibition der hypoxie induzierten Ephrin-B2 Repression das Wachstum und die Invasivitaet von Glioblastomen verringert. Zusaetzlich wurde gezeigt, dass der Verlust von ZEB2 ausreicht, die durch antiangiogenetische Therapie induzierte stark erhoehte Invasivitaet zu vermeiden. Die in dieser Arbeit gewonnen Erkenntnisse fuehren zu folgendem Modelmechanismus. In kleinen normoxischen Tumoren koennen repulsive Effekte des Ephrin-B2 reverse signalings und EphB forward signalings zwischen Tumorzellen und Zellen des umgebenden Gewebes die Ausbreitung und Invasion des Tumors unterdruecken. Zusaetzlich koennte das Ephrin-B2 induzierte EphB forward signaling zwischen benachbarten Tumorzellen die Mobilitaet der Tumorzellen wie in Brusttumoren inhibieren. Beim Erreichen einer bestimmten Tumorgroesse tritt Hypoxie auf, wodurch HIF-1alpha stabilisiert wird. Dies fuehrt dann zur ZEB2 Expression und leitet die Repression von Ephrin-B2 ein, was wiederum zur erhoehten Tumorzellemobilitaet und im Zusammenspiel mit MMPs zu Invasion fuehren kann. Gleichzeitig werden durch den HIF-induzierten VEGF-Gradienten neue Blutgefaesse rekrutiert. Damit wird der hypoxie-induzierten Invasivitaet entgegengewirkt. Wird mittels antiangiogenetischer Behandlung versucht Tumorprogression entgegenzuwirken, resultiert daraus eine erneut gesteigerte Hypoxie, die dann durch die ZEB2 vermittelte Repression von Ephrin-B2 wieder eine erhoehte Invasivitaet induzieren kann. Das Blockieren der ZEB2 Expression kann dieser durch antiangiogenetischen Behandlung induzierten Invasivitaet entgegenwirken.
Gegenstand dieser Arbeit sind Eigenschaften angeregter hadronischer Materie sowie physikalische Systeme, in denen diese Materie auftritt bzw. produziert wird. Die Beschreibung der stark wechselwirkenden Materie erfolgt in einem hadronischen, chiral-symmetrischen SU(3)L x SU(3)R Modell, welches die Saturierungseigenschaften von Kernmaterie und die Eigenschaften von Atomkernen reproduziert. Die Untersuchung heißer und dichter unendlicher hadronischor Materie zeigt, dass das vom Modell vorhergesagte Phasendiagramm stark von den Kopplungen der Baryonenresonanzen abhängt. Für kalte hadronische Materie ergibt die Einbeziehung des Baryonendekupletts und die Freiheit in deren Vektorkopplungen eine sehr große Bandbreite an verschiedenen Zustandsgleichungen. Für heiße hadronische Materie mit verschwindendem baryochemischen Potential zeigt sich ebenfalls eine starke Abhängigkeit der Eigenschaften hadronischer Materie von der Ankopplung der baryonischen Resonanzen. Es werden drei verschiedene Parametrisierungen betrachtet. Das resultierende Phasenübergangsverhalten variiert von einem "Crossover" über einen schwachen, zu einem doppelten Phasenübergang erster Ordnung. Es zeigt sich jedoch, dass die beobachteten Eigenschaften von Neutronensternen die Unbestimmtheit bzgl. der Vektorkopplung dieser Freiheitsgrade und damit der Zustandsgleichung deutlich verringern. Das Raum-Zeit Verhalten relativistischer Schwerionenkollisionen bei SPS- und RHIC-Energien wird mittels einer hydrodynamischen Simulation unter Benutzung der chiralen Zustandsgleichungen untersucht. Dabei spiegelt sich das unterschiedliche Phasenübergangsverhalten deutlich im Ausfrierverhalten der hadronischen Materie wider. Die im chiralen Modell berechneten Teilchenzahlverhältnisse werden mit den aus Schwerionenkollisionen von AGS- bis RHIC-Energien erhaltenen experimentellen Daten verglichen. Dabei zeigt sich, dass die verschiedenen Parametersätze des chiralen Modells und die Rechnungen für ein nichtwechselwirkendes, ideales Hadronengas eine ähnlich gute Beschreibung der gemessenen Weite liefern. Die deduzierten Ausfrierwerte für die Temperatur sind sensitiv auf das Phasenübergangsverhalten und liegen unterhalb der jeweiligen kritischen Temperatur. Die vorhergesagten Ausfriermassen sind in allen Parametrisierungen sehr ähnlich mit Abweichungen bis zu 15% von den entsprechenden Vakuumwerten. Die Untersuchung der Eigenschaften von Vektormesonen in dichter Materie erfolgt in der Mittleren-Feld- und in der HartreeNäherung. Hierbei zeigt sich eine signifikante Reduzierung der Teilchenmassen durch Vakuumpolarisationseffekte.
Aim: The aim of this study was to measure cortico-cortical connectivity in multiple sclerosis (MS) patients by TMS-evoked potential (TEP) latencies in EEG evoked by transcranial magnetic stimulation (TMS) of the hand area of the primary motor cortex of one hemisphere. TEPs were recorded on the stimulated- and at the homologue site in the non-stimulated contralateral hemisphere. Both interhemispheric directions were tested. Interhemispheric latencies of the two main reproducible TEPs, the positive component at 60 ms and the negative component at 100 ms (P60 and N100, respectively), were expected to be significantly prolonged in MS-patients compared to healthy volunteers.
Material and methods: The study compared interhemispheric propagation of P60 and N100 in groups of 12 patients with early-stage relapsing-remitting MS (RRMS) and 16 age- and gender-matched healthy controls. The study was approved by the Ethics Committee of the Medical Faculty of the Goethe-University of Frankfurt/Main and conformed to the latest revision of the Declaration of Helsinki of 2008. TEPs were recorded by means of EEG and their latencies were statistically evaluated in 10 channels around the stimulation site and in 10 corresponding electrodes in the non-stimulated contralateral hemisphere. Interhemispheric conduction time was calculated by the difference of TEP latency in non-stimulated vs. stimulated hemisphere.
Results: An ANOVA on interhemispheric conduction time showed a significant prolongation for the N100 from left to right hemisphere in MS compared to controls, while no group differences were found for the P60 and the N100 from right to left hemisphere.
Conclusion: The results provide first evidence that the N100 may constitute an interesting marker to measure interhemispheric conduction delays in early-stage RRMS. The specificity of the present finding and its relation to fiber tract pathology should be examined in further correlative analyses with diffusion tensor imaging and other structural MRI data.
This dissertation is an investigation of pitch accent, or lexical tone, in standard Croatian. The first chapter presents an in-depth overview of the history of the Croatian language, its relationship to Serbo-Croatian, its dialect groups and pronunciation variants, and general phonology. The second chapter explains the difference between various types of prosodic prominence and describes systems of pitch accent in various languages from different parts of the world: Yucatec Maya, Lithuanian and Limburgian. Following is a detailed account of the history of tone in Serbo-Croatian and Croatian, the specifics of its tonal system, intonational phonology and finally, a review of the most prominent phonetic investigations of tone in that language.
The focal point of this dissertation is a production experiment, in which ten native speakers of Croatian from the region of Slavonia were recorded. The material recorded included a diverse selection of monosyllabic, bisyllabic, trisyllabic and quadrisyllabic words, containing all four accents of standard Croatian: short falling, long falling, short rising and long rising. Each target word was spoken in initial, medial and final positions of natural Croatian sentences. This research fills several gaps in the existing literature. Namely, the production of tone was investigated in words with a syllabic /r̩/, in pretonal syllables and in non-initial context. Acoustic parameters measured included duration, F0 in every 10% of the nucleus duration, overall pitch, pitch range and pitch peak alignment.
Results showed that differences between falling and rising accents in Croatian are produced mainly with tonal parameters and that the most salient features were pitch peak alignment and overall pitch. The difference between long and short accents was primarily durational and optionally tonal. Words produced in initial and medial sentence positions had a rising contour in their accented syllable, while in the final, segments were usually falling.
Plastics contain a complex mixture of chemicals including polymers, additives, starting substances and side-products of processing. These plastic chemicals are prone to leach into the packaged goods, in the case of food contact materials (FCMs), or into the natural environment, in the case of plastic debris. Thus, plastics represent an exposure source of chemicals for humans and wildlife alike. While it is widely known that individual plastic chemicals, such as bisphenol A and phthalates, are hazardous, little is known on the overall chemical composition and toxicity of plastics. When fragmented into smaller particles, referred to as microplastics (< 5 mm), the plastic itself can be ingested by many species. It is well established that microplastic ingestion can have negative consequences for a wide range of organisms including invertebrates, but the contribution of plastic chemicals to the toxicity of microplastics is unclear.
Given the above, the present thesis aimed at a comprehensive toxicological, ecotoxicological and chemical characterization of everyday plastics. For a comparative evaluation, 77 plastic products were selected covering 16 material types (e.g., polyethylene) made from petroleum or renewable feedstocks. These products included biodegradable products, FCMs and non-FCMs, as well as raw materials and final products, respectively. In the first two studies, the chemical mixtures contained in the 77 products were extracted with methanol and extracts were analyzed in a set of four in vitro bioassays and by non-target high-resolution gas or liquid chromatography mass spectrometry. Since an exposure only occurs if chemicals actually leach under realistic conditions, in a third study migration experiments with water were conducted for 24 out of the 77 products. The aqueous migrates were assessed in the same way as the methanolic extracts. In addition, the freshwater invertebrate Daphnia magna was exposed chronically to microplastics made of polyvinylchloride (PVC), polyurethane (PUR) and polylactic acid (PLA) to investigate the contribution of chemicals in microplastic toxicity, in a fourth study.
The experimental findings demonstrate that a wide variety of chemicals is present in plastics. A single plastic product can contain up to several thousand chemical features, most of which unique to that product and at the same time unknown. The results also indicate that the majority of these chemical mixtures are toxic in vitro. Accordingly, 65% of the plastic extracts induced baseline toxicity and 42% an oxidative stress response, while 25% had an antiandrogenic and 6% an estrogenic activity. This implies that chemicals causing unspecific toxicity are more prevalent in plastics than such with endocrine effects. These chemicals can also leach from plastics under realistic conditions. Between 17 and 8936 chemical features were detected in a single migrate sample and all 24 tested migrates induced in vitro toxicity. This means that humans and wildlife can actually be exposed to toxic plastic chemicals under realistic conditions. Generally, each product has its individual toxicological and chemical fingerprint. Thus, neither material type, feedstock, biodegradability nor the food contact suitability of a product can serve as a predictor for the toxicity, the chemical composition or complexity of a product. Likewise, this means that bio-based and biodegradable materials are not superior to their petroleum-based counterparts from a toxicological perspective despite being promoted as sustainable alternatives to conventional plastics.
Moreover, the present thesis demonstrates that plastic chemicals can be the main driver for microplastic toxicity. Irregular microplastics made of PVC, PUR and PLA adversely affected life-history traits of D. magna in a polymer type- and endpoint-dependent manner at concentrations between 100 and 500 mg L-1 and with a higher efficiency than natural kaolin particles. While the toxicity of PVC was triggered by the chemicals used in the material, the effects of PUR and PLA were induced by the physical properties of the particle.
In addition, in the fifth study, results and observations made during this thesis were integrated inter- and transdisciplinarily with the perspectives of a social scientist and a product manufacturer. This elucidated that knowledge on plastic ingredients is often concealed, is lacking or not applicable in practice. These intransparencies hinder the safety evaluation of plastic products as well as the choice and sale of the least toxic packaging material.
Overall, the present thesis highlights that the chemical safety of plastics and their bio-based and biodegradable alternatives is currently not ensured. Thus, chemicals require more consideration in the toxicity and risk assessment of plastics and microplastics. Product-specific and complex chemical compositions, including unknown compounds, pose a challenge here. Two essential steps towards non-toxic products are to increase transparency along the product life cycle and to reduce the chemical complexity of plastics by communication and regulation. The results of the present thesis indicate that products exist which do not contain toxic chemicals. These can serve to direct the design of safer plastics. Since toxicity and chemical complexity seem to increase with processing, the integration of toxicity testing during the production steps would further support the safe and sustainable production and use of plastic products.