Refine
Year of publication
- 2007 (23) (remove)
Document Type
- Doctoral Thesis (23) (remove)
Language
- English (23) (remove)
Has Fulltext
- yes (23)
Is part of the Bibliography
- no (23)
Keywords
- Carrier-Proteine (2)
- Membranproteine (2)
- NMR-Spektroskopie (2)
- Proteinfaltung (2)
- ABC-Transporter (1)
- Aminosäurensequenz (1)
- Biophysik (1)
- Biosensorik (1)
- Blutgefäß (1)
- Blutgefäßsystem (1)
Institute
- Biochemie und Chemie (23) (remove)
The formation and maintenance of a defined three-dimensional structure is a prerequisite for most proteins in order to fulfill their function in the native context. However, there are proteins, which are intrinsically unstructured and thus natively unfolded. In addition, the misfolding and aggregation of many proteins can lead to severe diseases. The investigation of non-native states of proteins significantly contributes to the understanding of protein folding and misfolding. Nuclear magnetic resonance (NMR) spectroscopy is the only known technique that can provide information on structure and dynamics of non-native states of proteins at atomic resolution. Unfolded and non-native states of proteins have to be treated as ensembles of rapidly interconverting conformers and their observed properties are ensemble and time averaged. In this thesis, hen egg white lysozyme (HEWL) and mutants thereof have been investigated by NMR spectroscopy. The reduction of its four disulfide bridges and the successive methylation of the cysteine residues renders HEWL permanently non-native (‘HEWL-SMe’). Alternatively, the exchange of the eight cysteines for alanines results in very similar states (‘all-Ala-HEWL’). Under these conditions, HEWL-SMe and all-Ala-HEWL do not resemble random coil conformations, but exhibit residual secondary and tertiary structure. The presence of hydrophobic clusters and long-range interactions around the proteins six tryptophan residues and the modulation of these properties by single-point mutants has been observed. For the NMR spectroscopic investigation, HEWL has been isotopically labelled in E. coli by expression into inclusion bodies. After purification, the 1HN, 15NH, 13Calpha, 13Cbeta, 13C’, 1Halpha and 1Hbeta resonances of HEWL-SMe and all-Ala-HEWL have been assigned almost completely using three-dimensional NMR experiments. The analysis of secondary chemical shifts revealed regions in the proteins sequence — particularly around the six tryptophan residues—with significantly populated alpha-helix like conformations. In order to further elucidate the influence of the tryptophan side chains, a set of two new pulse sequences has been developed that allowed for the successful assignment of the 13Cg, 15Ne and 1HNe resonances in these side chains. This knowledge was eventually exploited in the interpretation of two-dimensional 15N-1H photo-CIDNP spectra, which revealed a differential solvent accessibility of the tryptophan residues in all-Ala-HEWL but not in the single point mutant W62G-all-Ala-HEWL. In addition, heteronuclear R2 relaxation rates have been determined for the indole 15Ne nuclei of all-Ala-HEWL and W62G. While in the wild-type like all-Ala-HEWL, the rates are different among the six tryptophan residues, in W62G they are more uniform. Together with relaxation data from the amide backbone, these results indicate the significant destabilization of the hydrophobic clusters in the absence of W62. In contrast, in the W108G mutant the profile of the R2 relaxation rates was not found to be significantly altered. No evidence was found by R1rho relaxation rates and relaxation dispersion measurements for conformational exchange on slower (micro- to millisecond) timescales. Residual dipolar couplings have been determined for non-native HEWL in order to retrieve structural information of these states. The differences of the W62G and the wild-type like non-native HEWL is also picked up in NH-RDCs of these proteins aligned in polyacrylamide gels. Significant positive RDCs are observed in the regions of the hydrophobic clusters in all-Ala-HEWL, but to a much lesser degree in W62G. So far, all attempts to simulate RDCs from generated non-native ensembles failed even when including long-range contacts or specific phi/psi backbone angle propensities. However, the measured RDCs can be used to cross-validate structural ensembles of non-native HEWL generated by molecular dynamics simulations that are based on restraints from the other experimental data, such as the differential solvent accessibilities from the photo-CIDNP experiments and the data on the hydrophobic clustering gained from the combined mutational and relaxation studies. Finally, non-native HEWL has been investigated for the first time using two-dimensional NMR in organic solvents, which are able to induce secondary structures and ultimately lead to amyloid formation. Under these conditions severe line broadening was observed, which was attributed to exchange between different — mostly a-helical— conformations. In summary, in this thesis methods have been developed, optimized and successfully applied for the structural and dynamical characterization of non-native states of proteins and the effect of single-point mutants on the properties of such ensembles has been investigated. Data has been gained that can considerably contribute to the further elucidation of the nature of non-native states of HEWL by molecular dynamics simulations.
First milestone of this Ph.D. thesis was the successful extension of conventional NTA/His-tag technique to self-assembling, multivalent chelator thiols for high-affinity recognition as well as stable and uniform immobilization of His-tagged proteins on chip surfaces. Bis-NTA was linked via an oligoethylene glycol to alkyl thiols by an efficient modular synthesis strategy yielding a novel, multivalent compound for formation of mixed SAMs with anti-adsorptive matrix thiols on gold. Multivalent chelator chips allow a specific, high-affinity, reversible, long-term immobilization of His-tagged proteins. In AFM studies reversibility of the specific protein immobilization process was visualized at single molecule level. The entire control over the orientation of the immobilized protein promotes this chip surface to an optimal platform for studies focusing on research targets at single molecule level and nanobiotechnology. Based on the constructed protein chip platform above and a novel AFM mode (contact oscillation mode, COM) – developed during the current Ph.D. work – protein nanolithography under physiological conditions enabling fabrication of active biomolecular patterns in countless variety has been established. Reversible COM-mediated nanostructuring is exceptionally suitable for multiplexed patterning of protein assemblies in situ. The first selfassembled protein layer acts as a biocompatible and ductile patterning material. Immobilized proteins can be replaced by the AFM tip applying COM, and the generated structures can be erased and refilled with different proteins, which are immobilized in a uniform and functional manner. Multi-protein arrays can be systematically fabricated by iterative erase-and-write processes, and employed for protein-protein interaction analysis. Fabrication of two-dimensionally arranged nanocatalytic centres with biological activity will establish a versatile tool for nanobiotechnology. As an alternative chip fabrication approach, the combined application of methodologies from surface chemistry, semiconductor technology, and chemical biology demonstrated successfully how pre-patterned templates for micro- and nanoarrays for protein chips are fabricated. The surface physical, as well the biophysical experiments, proved the functionality of this technology. The promises of such process technology are fast and economic fabrication of ready-to-use nanostructured biochips at industrial scale. Membrane proteins are complicated in handling and hence require sophisticated solutions for chip technological application. A silicon-on-insulator (SOI) chip substrate with microcavities and nanopores was employed for first technological investigation to construct a protein chip suitable for membrane proteins. The formation of an artificial lipid bilayer using vesicle fusion on oxidized SOI cavity substrates was verified by CLSM. Future AFM experiments will give further insights into the chip architecture and topography. This will provide last evidence of the sealing of the cavity by the lipid bilayer. Transmembrane proteins will be employed for reconstitution experiments on this membrane protein chip platform. Highly integrated microdevices will find application in basic biomedical and pharmaceutical research, whereas robust and portable point-of-care devices will be used in clinical settings.
Die vorliegende Arbeit behandelt die Entwicklung und Überprüfung von Modellen zur Berechnung von Schwingungspektren von Peptiden und Proteinen. Solche Modelle verbinden die Konformationsstruktur eines Moleküls mit seinen Schwingungseigenschaften und sind demzufolge wichtig für die Interpretation der Schwingungspektren. Die im Rahmen dieser Arbeit durchgeführte theoretische Erforschung dieses Gebietes beschränkt sich auf die Betrachtung der Amide-I-Moden, welche aufgrund ihrer physikalischen Eigenschaften sich zur Untersuchung der Peptidkonformationen eignen. Die Arbeit kann prinzipiell in zwei Teile separiert werden. In dem ersten Teil werden Fragen betrachtet, die mit der Entwicklung des Schwingungshamiltonian verbunden sind. Im zweiten Teil wurden die erhaltenen Hamiltonian für die Berechnung der Schwingungspektren verwendet. Bei der Berechnung der Schwingungspektren wurden verschiedene spektroskopische Näherungen verwendet und erforscht. Die Entwicklung des Schwingungshamiltonian beinhaltet zwei Aufgaben. Die ab initio Parametrisierung des Schwingungshamiltonian von Dipeptiden, sowie die Analyse der Entwicklungsmethoden für Schwingungshamiltonian von Polypeptiden. Die Entwicklungsmethoden stützen sich auf ab initio berecheten Schwingungseigenschaften von Dipeptiden und/oder elektrostatische Modelle. Die ab initio Parametrisierung basiert auf einer Geometrieoptimierung und anschließender Berechnung von Normalmoden. Hierbei wurde die Abhängigkeit der Ergebnisse vom theoretischen Niveau und dem verwendeten Basissatz untersucht. Die Transformation der errechneten Normalmoden lieferte die Schwingungseigenschaften der lokale Amide-I-Mode. Die Lokalisierung der Normalmode folgt diversen Kriterien. Sie ist von der Wahl der Lokalmoden und somit implizit auch von der Art der Geometrieoptimierung abhängig. Mit dieser Arbeit konnte die Abhängigkeit der Ergebnisse von der Parameterwahl weitgehend aufgeklärt und eine für das Amide-I-System geeignet Parametrisierung gefunden werden. Im nächsten Arbeitsschritt wurde die Abhängigkeit der Amide-I-Schwingungseigenschaften von den Peptidseitenketten und terminalen Gruppen untersucht. Desweiteren wurden Methoden zur Formulierung der Hamiltonian für Polypeptide konzeptionell entwickelt. Diese Untersuchung ist außerordentlich wichtig, da direkte quantenmechanische Berechnungen von Polypeptiden zu zeitaufwendig sind. Solche Methoden beruhen auf dem sogenannten “Building-Block”-Ansatz und verschiedenen elektrostatischen Modellen. In dieser Arbeit wurden sowohl die einzelnen Methoden als auch ihre Kombination für die Entwicklung des Hamiltonians verwendet. Zur Abschätzung der Genauigkeit der verwendeten Methoden wurden Vergleichsrechnungen durchgeführt. Im zweiten Teil dieser Arbeit wurden die erhaltenen Schwingungshamiltonian zur Berechnung von Schwingungsspektren diverser gelöster Peptide angewandt. In diesem Zusammenhang konnte die Genauigkeit unterschiedlicher spektroskopischer Approximationen überprüft werden. Auf Grundlage der erhaltenen Ergebnisse können wir sagen, dass eine angemessene Beschreibung der konformationellen Verteilung und eine korrekte Berechnung des dynamischen Absorptionsspektrum gewährleistet ist. Was noch fehlt, ist ein hinreichend genaues quantenchemisches Modell für die Schwingungsfrequenzen eines gelösten Peptids. Diese Aufgabe stellt zur Zeit ein aktives Forschungsgebiet dar. Zuletzt wurde das Schwingungsspektrum eines sogenanten “Photoschaltbaren”-Peptids simuliert. Mit Hilfe des dafür aufgestellten Hamiltonians ist man in der Lage spektroskopische Beobachtungen auf Konformationsänderungen direkt zu übertragen.
A detailed understanding of how potassium channels function is crucial e. g. for the development of drugs, which could lead to novel therapeutic concepts for diseases ranging from diabetes to cardiac abnormalities. An improved understanding of channel structure may allow researchers to design medication that can restore proper function of these channels. This is particularly important for KCNQ channels, since four out of five family members are involved in human inherited disease. In addition to structure and function relationships the determinants which govern assembly of KCNQ subunits are decisive to understand the physiological role of the KCNQ channel family members. Many details of KCNQ channel assembly remain incompletely understood. Previous work has shown that the subunit-specific heteromerisation between KCNQ subunits is determined by a ~115 amino acid-long subunit interaction domain (si) within the C-terminus (Schwake et al., 2003). Recently, Jenke et al. (2003) proposed that the C-terminal domains in eag and erg K+ channels act as sites which drive tetramerization. From their ability to form coiled coils, these domains were referred to as tetramerizing coiled-coil (TCC) sequences. Jenke et al. also pointed out that KCNQ channels contain bipartite TCC motifs within their C-termini, exactly within the si domain, which is responsible for the subunit-specific interaction pattern. The first part of this thesis was dedicated to determine the individual role of these TCC domains on homomeric and heteromeric channel formation in order to further characterize the molecular determinants of KCNQ channel assembly. In the second part of this thesis cystein-scanning mutagenesis was employed, followed by thiol-specific modification using MTS reagents to screen more than 20 residues in the S3-S4 linker region and in the S4 transmembrane domain of the KCNQ1 channel to gain information about residue accessibility, the functional effects of thiol-modifying reagents (MTSES), and effects of crosslinking selected pairs of Cys residues by Cd+ ions, which could be used for testing model predictions based upon known Kv channel structures from the literature. According to homology modelling based on the Kv1.2 structure it was attempted to determine the proximity of individual residues from different transmembrane segments using the metal bridge approach (crosslinking by Cd+ ions). This led us to derive structural constraints for interactions between the S4 voltage sensor and adjacent transmembrane segments of KCNQ1. Similar studies have previously been performed on the Shaker K+ channel, which has served as a paradigm for structure-function research of voltage-gated K+ channels for a long time, but little is known for KCNQ channels concerning their similarity to published K+ channel structures.
Das genetische Material der Zellen besteht aus Molekülketten der Desoxyribonukleinsäure (DNA), die ein Träger der Erbinformation ist. In normalen Körperzellen wird die Erbinformation der DNA in eine andere Molekülkette, die sogenannte Ribonukleinsäure (RNA), übersetzt. Die RNA reguliert die Bildung von neuem Protein in der Zelle. Dass die RNA nicht bloß ein „Stempel“ ist, der die Informationen der DNA weitervermittelt, darin sind sich die Experten heute einig. RNA-Moleküle können Informationen speichern, katalytische Aktivitäten entfalten, sich perfekt tarnen, und sie regulieren auch als Produkt ihre eigene Synthese. Manche Viren enthalten ebenfalls RNA (oder DNA) und können so den Produktionsapparat der Zelle täuschen. Erkenntnisse über die Wechselwirkung dieser RNA mit natürlichen und synthetischen Liganden können zur Suche nach potentiellen Wirkstoffen beitragen. Nukleinsäuren sind lineare Biopolymere von grundlegenden Untereinheiten, die Nukleotide genannt werden und aus Adenin (A), Cytosin (C), Guanin (G), Urazil (U), und Thymin (T) zusammengesetzt sind. Sie sind jedoch in der Lage sich zu falten und so eine Doppel-Helixstruktur auszubilden. Diese besteht größtenteils aus den bekannten "Watson-Crick-Basenpaaren" (G-C und A-U oder A-T), die zur Stabilität der Struktur beitragen, sowie aus den weniger stabilen G-U-Paaren. Durch die Wechselwirkung zwischen verschiedenen Sekundärstrukturelementen entstehen Tertiärstrukturelemente, deren Struktur und Dynamik oft nur schwer experimentell zu bestimmen sind. Fortschritte in der RNA-Strukturanalyse wurden durch Röntgenkristallographie und Kernresonanzspektroskopie (NMR) möglich. Durch die Röntgenkristallographie wurden viele RNA-Eigenschaften festgestellt. Allerdings besteht keine Kristallstruktur für alle mögliche Einzelnfaser-RNA-Haarnadeln, weil diese immer dazu neigen, in eine linearen doppelte Faserform zu kristallisieren, die geringe biologische Bedeutung hat. Außerdem wurde mit Hilfe der NMR-Spektroskopie das dynamische Verhalten von RNA, z.B. Entfaltungsprozesse bei ansteigender Temperatur, beobachtet. Jedoch erlauben diese experimentellen Daten oft keine direkte mikroskopische Beschreibung der molekularen Prozesse. Molekulardynamik (MD)-Simulationen von biologischen Systemen ermöglichen es hingegen, diese Prozesse in atomischem Detail zu untersuchen. Die MD-Simulation beschreibt ein molekulares System auf atomarer Ebene mit Hilfe der klassischen Mechanik. Kräfte werden von empirischen Potentialen abgeleitet. Sie liefern zeitabhängige Trajektorien, die sich aus den Newton'schen Bewegungsgleichungen ergeben. Durch verbesserte Computerleistung, bessere Kraftfelder, und neu entwickelte genauere Methoden stimmen heutzutage MD-Simulationen von RNA mit experimentellen Daten immer besser überein. In meiner Doktorarbeit wurden MD-Simulationen durchgeführt um die Dynamik, die Struktur und insbesondere die Stabilität von RNA-Hairpins theoretisch zu beschreiben, um so ein erweitertes Verständnis für die dynamischen Vorgänge zu erhalten. Auch der SFB 579 der Universität Frankfurt beschäftigt sich mit RNA-Systemen. Erforscht wird unter anderem der D-Loop des Coxsackievirus B3 (CVB3), der Virenmyocarditis verursacht. Die Interpretation dieser experimentellen Daten wird durch MD-Simulation möglich. In dieser Arbeit wurden das GROMACS Software-Paket und das AMBER Kraftfeld verwendet, um das strukturelle, dynamische und thermische Verhalten der RNA-Hairpins mit Hilfe von MD-Simulationen auf atomarer Ebene zu untersuchen. Betrachtet wurden die 14-mer RNA-Hairpins, uCACGg und cUUCGg. Die verfügbaren NMR-Strukturen zeigen, dass das uCACGg-Tetraloop auffallend ähnlich in der gesamten Geometrie und den Wasserstoffbindungen zu der experimentellen Struktur des cUUCGg-Tetraloop ist, obwohl die schließende Basenpaarsequenz der beiden Tetraloops unterschiedlich sind. Trotz beachtlicher struktureller Ähnlichkeit unterscheiden sich allerdings die uCACGg und cUUCGg Tetraloops in Funktionalität und Thermostabilität. Zunächst orientiert sich unser erstes Bemühen an der Frage nach einem guten Modell für RNA-Hairpins und Simulationsbedingungen, um die zu untersuchenden RNA-Hairpins in Wasser möglichst realitätsnah zu simulieren. Erstens werden drei Versionen des biomolekularen AMBER-Kraftfelds geprüft, indem man die 60 ns Simulationen des 14-mer uCACGg-Hairpins durchführt. Die simulierten strukturellen Eigenschaften und Atomfluktuationen zeigen hohe Ähnlichkeiten in den drei Kraftfeldern. Darüber hinaus stimmen die von MD-Simulationen berechneten Atomkernabstände mit den experimentellen NMR-Daten gut überein. Die gute Übereinstimmung zwischen den Simulationen und den strukturellen NMR Daten belegt die Fähigkeit des AMBER-Kraftfelds zur Beschreibung der strukturellen Eigenschaft von kleinen RNA-Hairpins. Anschließend werden die Einflüsse der Methoden, welche die langreichweitigen, elektrostatischen Wechselwirkungen beschreiben, auf die strukturellen Eigenschaften untersucht. Insbesondere werden die Ergebnisse der Reaktionfeld-Methode mit denen der Particle Mesh Ewald (PME)-Methode verglichen. Es zeigt sich, dass die PME-Methode die elektrostatischen Wechselwirkungen am besten beschreibt, auch wenn die Simulationen der beiden Methoden Ähnlichkeit in der Struktur-Stabilität und der Atomfluktuation bei niedriger Natriumkonzentration aufweisen. Drittens wird der Kationseffekt auf die RNA-Stabilität untersucht. Betrachtet wurden zwei unterschiedliche Kationen (ein- und zweiwertig) und verschiedene Konzentrationen. Die Simulationen weisen darauf hin, dass sich die Metallionen in der Affinität zum RNA-Hairpin unterscheiden, wenn Na+ und/oder Mg2+ als Gegenionen verwendet werden. Weiterhin wird gezeigt, dass sich die bevorzugten Positionen der Na+-Ionen in der großen Furche (major groove) des RNA-Hairpins befinden. Insbesondere die Anlagerungsort der Na+-Ionen liegen in der Nähe des schließenden Basenpaar U5-G10. Im Vergleich zu Na+-Ionen lagern sich Mg2+-Ionen sowohl an die RNA-Basen U3, A4-U11, und die Phosphat-Gruppe, als auch an das schließenden Basenpaar U5-G10 an. Bestätigt werden die Modelle und Simulationsbedingungen durch den Vergleich von Parametern, die sowohl experimentell als auch durch Simulationen ermittelt werden können. Ferner erlauben MD-Simulationen Einblick in das System, indem sie detallierte Konformations- und andere Verteilungen liefern. In der vorliegenden Arbeit wurden die Einflüsse der Loopsequenz und des schließenden Basenpaares auf die Verteilung der Konformationen, der internen Bewegungen, und auf die Thermostabilität von zwei RNA-Hairpins mit Hilfe dieser Modelle untersucht. Zunächst wurden die strukturellen Eigenschaften bei Raumtemperatur ausgewertet. Die starken strukturellen Ähnlichkeiten und die gute Übereinstimmung mit NMR-Daten bestätigen die Hypothese, dass die zwei Tetraloops zur gleichen “erweiterten” RNA-Familie gehören. Diese zwei Hairpins haben ähnliche Lösemittelzugängliche Oberflächen (solvent accessible surface), wobei deren Lösemittel zugänglichen funktionellen Gruppen unterschiedlich sind. Weiterhin weist das uCACGg-Hairpin eine stärkere Tendenz auf Wasserstoffe abzugeben als das cUUCGg-Hairpin, was in den unterschiedlichen Bindungsaffinitäten zwischen diesen Hairpins und der viralen Protease begründet liegt. Darüber hinaus wurde der Faltungs- und Entfaltungsprozess mit Hilfe der Replica-Exchange-Molekulardynamik-Simulationen untersucht. Diese Untersuchung zielt auf das bessere Verständnis der unterschiedlichen Thermostabilität der Hairpins, indem sie die möglichen Zwischenprodukte im atomaren Detail liefern. Sowohl experimentell als auch von den MD-Simulationen ergibt sich eine Differenz in den Schmelztemperaturen der beiden Hairpins von ungefähr 20 K. Allerdings sind die von MD beobachteten Schmelztemperaturen 20 % höher als die von Experiment zu ansehende Wert. Die Ergebnisse machen deutlich, dass die Schmelztemperaturdifferenz nicht auf die Unterschiede in der Sequenz, in der Struktur, oder in der Dynamik der Loops zurückführen sind, sondern auf die Unterschiede der Basenpaaren in den Stämmen. Weiterhin wird gezeigt, dass sich das uCACGg-Hairpin einerseits kooperativ entfaltet, und die Entfaltung des cCACGg-Hairpins anderseits weniger kooperativ stattfindet. Um die schnelle interne Dynamik der uCACGg- und cUUCGg-Hairpins zu untersuchen, erlauben die Simulationen von 50 ns eine akurate Beschreibung der schnellen internen Bewegung der RNA-Hairpin, obwohl der den Hairpins zugängliche Konformationsraum nicht vollständig abgedeckt wird. Die NMR-Relaxationsparameter, die mit Hilfe der MD-Simulationen zurückgerechnet wurden, bestätigen das Modell und die Simulationsbedingungen der MD-Simulationen. Im Hinblick auf die Übereinstimmung kann man den besten Ansatz zur Berechnung der NMR-Ordnungsparameter bestimmen. In dieser Arbeit wurden drei verschiedene Ansätze angewandt, nämlich das Fitting von 100 ps auf modellfreiem Ansatz nach Lipari-Szabo, equilibrium average, und das Gaussian Axial Fluctuation (GAF)-Modell. Die zwei letzteren können nur qualitativ mit den experimentellen Daten übereinstimmen. Die NMR-Ordnungsparameter können mit Hilfe des Modells von Lipari-Szabo richtig ermittelt werden, wenn sich die interne Bewegung in kleineren Zeitskalen als zur Gesamtbewegung vollzieht. Vorausetzung für die Berechnung dieses Modells ist aber, dass das Fitting der internen Korrelationsfunktionen nur auf den ersten Teil von 100 ps der Korrelationsfunktionen eingesetzt wird. Die berechneten Ordnungsparameter deuten auf ein unterschiedliches Verhalten der beiden Hairpins besonders im Loop-Bereich hin. Die konformationelle Umordnung, die beim UUCG-Loop beobachtet wurde, tritt beim CACG-Loop nicht ein. Zusammenfassend lässt sich sagen, dass es durch den Einsatz von MD Simulationen ermöglicht wird, die strukturellen und dynamischen Eigenschaften der RNA-Systeme auf atomarer Ebene zu untersuchen. Als Schlussfolgerung zeigt diese Doktorarbeit, dass sich die Studie der konformationell Dynamik der RNA-Systeme durch die Kombination aus MD-Simulation und NMR-Spektroskopie sowie der Leistungsfähigkeit der MD-Simulationen, die die interne Bewegungen deutlich beschreiben können, untersuchen lässt.
The ABC protein ABCE1, also called HP68 or RNase L inhibitor (RLI), is one of the most conserved proteins in evolution. It is universally expressed in eukaryotes and archaea, where ABCE1 is essential for life. ABCE1 plays a crucial role in translation initiation and ribosome biogenesis, however, the molecular mechanism of ABCE1 remains unclear. In addition to two ABC ATPase domains, ABCE1 contains a unique N-terminal region with eight conserved cysteines predicted to coordinate iron-sulfur (Fe-S) clusters. To analyze the function of ABCE1, the hyperthermophilic crenarchaeote Sulfolobus solfataricus was chosen as a model system. S. solfataricus ABCE1 was overexpressed homologously in S. solfataricus and heterologously in E. coli. Noteworthy, for tagged-protein production in S. solfataricus a novel expression system based on a virus shuttle vector was established. This is the first example for a successful overexpression and purification of isolated full-length ABCE1. For the first time it was shown that ABCE1 indeed bears biochemical properties of an ABC protein even though it has unique features. Remarkably, the nucleotide binding domains (NBDs) of ABCE1 bound ATP and AMP, but were functionally non-equivalent in ATP hydrolysis. Mutations of conserved residues in the second NBD led to a hyperactive ATPase, which implies an intramolecular mechanism of dimer formation. Truncation of the Fe-S cluster domains did not influence ATPase activity. The Fe-S clusters of ABCE1 were analyzed by biophysical and biochemical methods. As presented in this study, ABCE1 harbors two essential diamagnetic [4Fe-4S]2+ clusters, one ferredoxin-like cluster formed by cysteines at position 4/5/6/7 and one unique ABCE1 cluster formed by cysteines at position 1/2/3/8. ABCE1 was found to be associated with RNA after purification from S. solfataricus and bound ribosomal RNA in vitro. In addition, ABCE1 showed homo-oligomerization and appeared to form a hexameric complex of ~440 kDa, which was RNase sensitive. Archaeal ABCE1 associated with ribosomes, however, the unique Fe-S clusters of ABCE1 were not required for this interaction. Although archaeal ABCE1 assembled with ribosomes and ribosomal RNA, ABCE1 proved not to be essential for translation in S. solfataricus and did not interact with archaeal initiation factors. Nevertheless, the ABCE1 gene is one of the few genes conserved between archaea and eukaryotes and fulfills a universal task, which needs further characterization.
Two types of proteins transport ions across the membrane – ion channels and ion pumps. Ion pumps transport ions against their electrochemical gradient by co-transporting another ion or a substrate molecule through a concentration gradient or by coupling this process to an energy source like ATP. Those that couple ATP hydrolysis to ion transport are called ion motive ATPases and can be classified as ‘V’, ‘F’ and ‘P’ types. In this thesis, two sub-classes of P-type ATPases, PIIIA and PIB were studied. Attempts were made to over-express and crystallize the plant proton pump AHA2 (a PIIIA-ATPase). Also, the two putative copper transporting ATPases, CtrA3 (CopB-like) and CtrA2 (CopA-like) from Aquifex aeolicus (both PIB pumps) were over-expressed in E. coli and characterized. PIIIA-type pumps transport protons across the membrane and are found exclusively in plants and fungi, and probably some archaea. One of the most characterized proton pump biochemically is the A. thaliana proton pump AHA2. An 8Å projection map of this enzyme is already available (Jahn 2001). PIBATPases, also called CPX type pumps transport heavy metal ions such as Cu+, Cu2+, Zn2+, Pb2+, Cd2+, Co2+ across biological membranes and play an important role in homeostasis and biotolerance of these metals. CopA and CopB are two such proteins that transport copper across cell membrane found in many prokaryotes. CopB-like proteins are found almost exclusively in bacteria, with CPH sequence motif, while CopA-like proteins have CPC sequence motif, also found in eukaryotic copper transporters including human ATP7A and ATP7B. CopB extrudes Cu2+ across the membrane. CopA is activated by and transports Cu+ but the direction of transport is debated. Attempts were made to over-express the plant proton pump AHA2 in yeast Pichia pastoris. However, the yeast expressed only a truncated protein, which could not be used for further studies. It can be concluded that P. pastoris strain SMD1163 is not a good host for expression of AHA2. Focus was then shifted to AHA2 that has been over-expressed and purified from S. cerevisiae strain RS72. Growth and purification protocols had to be changed from published methods because of laboratory constraints and this probably had an effect on the protein produced. The protein purified from S. cerevisiae could not be crystallized reproducibly for structural studies by electron microscopy. CtrA3 was expressed in E. coli and purified using Ni2+-NTA matrix. Like CopB of A. fulgidus (Mana Capelli 2003), it was active only in the presence of Cu2+ and to some extent in Ag+. The protein was maximally active at 75°C, at pH 7 and in presence of cysteine. Lipids were essential for the activity of CtrA3. However, when the protein was purified in Cymal-6, CtrA3 could not hydrolyze ATP, even when lipids were added to the reaction mixture. For reconstitution of CtrA3 into liposomes for 2D crystallization, several lipids were tested. To screen the lipids compatible for protein incorporation, CtrA3 was dialyzed with different lipids at a high lipid-to-protein ratio of 10:1 and centrifuged by sucrose density gradient. Protein incorporated in lipids localized with liposome fraction in the gradient. Most of the CtrA3 was incorporated into DPPC with no aggregation. This lipid was used for reconstitution of CtrA3 at low LPRs, and at an LPR of 0.3-0.5, the protein formed 2D crystals. A NaCl concentration of 50mM was necessary for the formation of crystals. However, salt removal by dialysis prior to harvesting was essential for obtaining wellordered lattices of CtrA3. Addition of preservatives like trehalose and tannin or direct plunging in liquid ethane for cryo-microscopy destroyed the crystal lattice. Similar to CtrA3, the gene responsible for expression of CtrA2 was amplified from genomic DNA of A. aeolicus and expressed in E. coli and purified by Ni2+-NTA. Functional characterization of CtrA2 was done by analyzing ATP hydrolysis activity of the enzyme. Similar to CopA of A. fulgidus (Mandal 2002), CtrA2 was activated in the presence of Ag+ and to some extent, Cu+. It is possible that both the copper ATPases of A. aeolicus have different ion selectivity- CtrA3, specific for Cu2+ and CtrA2, specific for Cu+. Maximal activity of CtrA2 was also at 75°C. Cysteine was essential for activity of CtrA2, but the protein was not dependent on addition of lipids for activation. Reconstitution of CtrA2 was done similar to CtrA3 for screening of lipids for 2D crystallization. Of the lipids tested, DOPC reconstituted the protein best. However, screening at low LPRs did not yield any crystals. Even though both CtrA3 and CtrA2 are similar heavy metal transporting Ptype ATPases from the same organism and have 36% identity, they behaved completely different in their expression levels in E. coli, purification profiles, activity and reconstitution in lipids.
Membrane proteins play vital role in a variety of cellular processes, such as signal transduction, transport and recognition. In turn they are involved in numerous human diseases and currently represent one of the most prevalent drug targets. A comprehensive understanding of the mechanisms mediated by membrane proteins requires information about their structures at near-atomic resolution, although structural studies of membrane proteins remain behind those of soluble proteins. A bottleneck in the study of membrane proteins resides in the difficulties that are encountered during their high-level production in cell based systems. However, many toxic effects attributed to the over production of membrane proteins are eliminated by cell-free expression, as viable host cells are no longer required. Therefore, the objective of this study was to obtain adequate amounts of selected membrane transport proteins for their structural studies using a cell-free expression system. For the establishment of the cell-free system for membrane proteins, the transporters YbgR and YiiP from Salmonella typhimurium LT2, PF0558 and PF1373 from Pyrococcus furiosus, from the cation diffusion family (CDF), BetP from Corynebacterium glutamicum from the betaine/carnitine/choline transporter (BCCT) family and Aq-2030 from Aquifex aeolicus VF5 from the monovalent cation/proton antiporter-2 (CPA2) family were selected. An Escherichia coli S-30 extract based cellfree system was established by generating the best expression constructs of the target proteins, preparing T7 RNA polymerase and an S-30 extract with high translation efficiency. The functionality of the S-30 extract was shown by the cell-free expression of correctly folded Green Fluorescent Protein (GFP). Essential factors of the cell-free system such as the Mg2+ concentration, the bacterial S-30 extract proportion in the reaction mixture and the time-course of cell-free reactions have been optimized. For the cell-free production of membrane proteins in soluble form, the possibility to supplement cell-free reactions with detergents was explored. A wide range of non-ionic or zwitterionic detergents, were found to be compatible with cell-free synthesis, while ionic detergents and non-ionic detergents at high concentrations had an inhibitory effect. Moreover, high concentrations of polyoxyethylene-alkyl-ethers (Brij) detergents were found to have enhancing effect on the production levels as well as on the solubility of cell-free produced proteins. As membrane proteins tend to misfold and aggregate in a membrane-free translation system, the possibility to supplement the cell-free reactions with inner membrane vesicles (IMVs) to obtain correctly folded target transport proteins was explored. All the target proteins were successfully produced in the batch cell-free reactions and were found to be incorporated in the IMVs. A continuous exchange cell-free (CECF) system was established, where consumable substrates (amino acids, nucleotides and energy regenerating compounds) were supplied to the cell-free reaction mixture through a dialysis membrane, which in consequence resulted in high-level production of target proteins compared to the batch system. The osmosensing and osmoregulated sodium-coupled symporter BetP from C. glutamicum was chosen for the large scale production in CECF set-up. The protein is easily produced in E. coli and is functional as assayed by its transport activity, after purification and reconstitution in liposomes. It is therefore possible to compare in-vivo and cell-free production. High-level cell-free production of BetP was achieved in CECF mode in different forms: (i) as precipitate, (ii) as soluble form in detergent, and (iii) incorporated in IMVs. Cell-free production of BetP resulted in the yield of about 0.5 mg of purified BetP from 1 ml of CECF reaction. The yield of purified BetP was increased to 1.6 fold by addition of 1% polyoxyethylene-(20)-cetyl-ether (Brij58) detergent in the reaction mixture. Moreover, the high level cell-free production of BetP (0.5 mg purified BetP/ml reaction mixture) incorporated in IMVs was shown for the first time in this work.However, it was observed that oligomerization of BetP was not efficient in the cell-free system. Factors that can promote the folding of membrane proteins such as lipids and chaperones were investigated. Addition of lipids and molecular chaperone GroE facilitated correct folding of BetP resulting in increased yield and stability of cell-free produced BetP. The results obtained indicate that most of the cell-free produced BetP exists in functional oligomeric form. The possibility of obtaining milligram amounts of BetP, a 12 trans-membrane protein from the cell-free reactions holds promise for structural and functional studies of other membrane proteins. In any case, the strategies adapted in this study should prove extremely valuable for the production of membrane proteins in the E. coli cell-free expression system.
Colorectal cancer is one of the most cause of cancer and death in Western societies. Recently, histone deacetylase inhibitors (HDIs), which regulate transcription through modification of chromatin structure, received considerable interest on the ground of they ability to stop the growth and induce cell death in colon cancer tumours, representing a promising transcriptional cancer therapy. This kind of cancer initiates with an activating mutation in the Wnt cascade, allowing the nuclear import of ß-catenin binding to LEF/TCF. This induces the overexpression of growthpromoting oncogenes affecting the cell cycle arrest, lineage-specific cell differentiation and apoptosis processes. In addition, ß-catenin also participates in cell-cell adhesion via interactions with E-cadherin, which can be repressed by families of transcription factors Snail and ZEB. This, and gain of vimentin has been closely correlated with local invasion and metastasis since they avoid the induction of apoptosis through the loss of cell anchorage, a phenomenon called anoikis. In this process the inactivation of the kinases Src an FAK provoking disruption of focal adhesion complexes through is involved. LAQ824 is a HDAC inhibitor derivative of hydroxamic acid, which present antitumor effect in colon and other cancer cells. The aim of this study is to analyse the effect of LAQ824 in cell proliferation, apoptosis, motility and tumour invasion in a colon carcinoma model based on the adenoma-carcinoma sequence descrying trough which pathways LAQ824 is able to cause these effects. Here I demonstrate for the first time that a HDAC inhibitor, LAQ824, induces detachmentinduced cell death of colon cancer cell lines HCT116 and HT-29, a phenomenon called anoikis, in a caspase-dependent and p53-independent manner. In this process the component of the Wnt signalling pathway ß-catenin is involved. Furthermore LAQ824 upregulates the adhesion molecule E-cadherin expression in these cell lines independently of its repressor Snail, but probably mediated by the repressor ZEB. In addition LAQ824-induced anoikis is caused by disruption of focal adhesion complexes through inhibition of the activity of the kinases FAK and Src inhibiting cell motility indicating a strong antimetastatic potential for LAQ824.