Refine
Year of publication
Document Type
- Article (28)
Language
- English (28) (remove)
Has Fulltext
- yes (28)
Is part of the Bibliography
- no (28) (remove)
Keywords
- environmental tobacco smoke (6)
- particulate matter (4)
- additives (2)
- bibliometrics (2)
- passive smoke (2)
- second-hand smoke (2)
- (novel) brominated flame retardants ((N)BFR) (1)
- Acer platanoides (1)
- Adenocarcinoma (1)
- Aedes aegypti (1)
Institute
- Medizin (24)
- Biochemie und Chemie (10)
- Biochemie, Chemie und Pharmazie (1)
- Geowissenschaften / Geographie (1)
- Physik (1)
- Sportwissenschaften (1)
Environmental tobacco smoke (ETS) is a major contributor to indoor air pollution. Since decades it is well documented that ETS can be harmful to human health and cause premature death and disease. In comparison to the huge research on toxicological substances of ETS, less attention was paid on the concentration of indoor ETS-dependent particulate matter (PM). Especially, investigation that focuses on different tobacco products and their concentration of deeply into the airways depositing PM-fractions (PM10, PM2.5 and PM1) must be stated. The tobacco smoke particles and indoor air quality study (ToPIQS) will approach this issue by device supported generation of indoor ETS and simultaneously measurements of PM concentration by laser aerosol spectrometry. Primarily, the ToPIQ study will conduct a field research with focus on PM concentration of different tobacco products and within various microenvironments. It is planned to extend the analysis to basic research on influencing factors of ETS-dependent PM concentration.
Background: SARS-CoV-2 is one of the most threatening pandemics in human history. As of the date of this analysis, it had claimed about 2 million lives worldwide, and the number is rising sharply. Governments, societies, and scientists are equally challenged under this burden. Objective: This study aimed to map global coronavirus research in 2020 according to various influencing factors to highlight incentives or necessities for further research. Methods: The application of established and advanced bibliometric methods combined with the visualization technique of density-equalizing mapping provided a global picture of incentives and efforts on coronavirus research in 2020. Countries’ funding patterns and their epidemiological and socioeconomic characteristics as well as their publication performance data were included. Results: Research output exploded in 2020 with momentum, including citation and networking parameters. China and the United States were the countries with the highest publication performance. Globally, however, publication output correlated significantly with COVID-19 cases. Research funding has also increased immensely. Conclusions: Nonetheless, the abrupt decline in publication efforts following previous coronavirus epidemics should demonstrate to global researchers that they should not lose interest even after containment, as the next epidemiological challenge is certain to come. Validated reporting worldwide and the inclusion of low-income countries are additionally important for a successful future research strategy.
Nitrogen oxides (NOx), especially nitrogen dioxide (NO2), are among the most hazardous forms of air pollution. Tobacco smoke is a main indoor source of NOx, but little information is available about their concentrations in second-hand smoke (SHS), particularly in small indoors. This study presents data of NOx and its main components nitric oxide (NO) and NO2 in SHS emitted by ten different cigarette brands measured in a closed test chamber with a volume of 2.88 m3, similar to the volume of vehicle cabins. The results show substantial increases in NOx concentrations when smoking only one cigarette. The NO2 mean concentrations ranged between 105 and 293 µg/m3, the NO2 peak concentrations between 126 and 357 µg/m3. That means the one-hour mean guideline of 200 µg/m3 for NO2 of the World Health Organization was exceeded up to 47%, respectively 79%. The measured NO2 values show positive correlations with the values for tar, nicotine, and carbon monoxide stated by the cigarette manufacturers. This study provides NO2 concentrations in SHS at health hazard levels. These data give rise to the necessity of health authorities’ measures to inform about and caution against NOx exposure by smoking in indoor rooms.
Highlights
• Currently, China has the most publications, ahead of the USA and European countries.
• Research focuses are strictly separated into ecological and material science topics.
• Russia and Ukraine are among the frontrunners with a clear focus on materials science.
• The focus in PFAS research is shifting toward ecological issues.
• A national imbalance can be observed that leaves the low economies behind.
Abstract
The European Commission's current efforts to launch the largest proposal to restrict per- and polyfluoroalkyl substances (PFAS) in history reflect the dire global plight of PFAS accumulation in the environment and their health impacts. While there are existing studies on PFAS research, there is a lack of comprehensive analysis that both covers the entire research period and provides deep insights into global research patterns, incentives, and barriers based on various parameters. We have been able to demonstrate the increasing interest in PFAS research, although citation numbers are declining prematurely. Policy regulations based on proving and establishing the toxicity of PFASs have stimulated research in developed countries and vice versa, with increasing emphasis on ecological aspects. China, in particular, is investing increasingly in PFAS research, but without defining or implementing regulations - with devastating effects. The separation of industrial and environmental research interests is clear, with little involvement of developing countries, even though their exposure to PFAS is devastating. It, therefore, requires increased globally networked and multidisciplinary approaches to address PFAS contamination challenges.
Container-breeding Aedes spp. (Diptera: Culicidae) mosquitoes can be surveilled at low cost using ovitraps. Hence, this method is a preferred monitoring approach of dengue vectors in low-resource settings. The ovitraps consist of a cup filled with water and an oviposition substrate for female mosquitoes. The attractiveness of the substrates for female mosquitoes can greatly differ due to differences in texture, color, and smell of the materials used. We compare four oviposition substrates, which are all low priced, easy to transport, and easy to purchase, to maximize the success of Aedes egg sampling. Sampled egg material is often reared to adulthood for further taxonomic identification and transported to (international) laboratories for specialized vector research. Here we introduce a transport technique for sampled eggs. In addition, we explored the impact of international transport by means of a bilateral hatching experiment in Nepal, the country of origin, and in Germany, in a laboratory specialized in ecophysiological research. The best low-cost oviposition substrate for the dengue vectors Aedes albopictus (Skuse) and Aedes aegypti (L.) was found to be a white cotton sheet. The introduced transport technique of sampled eggs is easy to build from laboratory and household materials and ensures good transport conditions (i.e., temperature and relative humidity). Even under good temperature (17.4–31.0 °C) and humidity conditions (58.9–94.2%), hatching success of eggs was found to be reduced after international transport to Germany when compared to the hatching success of eggs in Nepal. We postulate that air pressure during international transport may have reduced the hatching success and strongly recommend pressure-regulated transport boxes for egg transport via airplane. As the proposed operation procedure is useful in assisting the monitoring of Ae. albopictus and Ae. aegypti in low-resource settings, Aedes researchers are encouraged to follow it for the sampling and transport of Aedes eggs.
Abstract In the middle of the twentieth century, the from North America sooty bark disease (SBD) of maples was first discovered in England and has spread in the last decades in Central Europe, in particular. The trigger of SBD is the mould fungus Cryptostroma (C.) corticale. The most common infested maple is the sycamore, Acer pseudoplatanus, a common tree in woods and parks. The disease is characterised by peeling of the outer layer of the bark and brownish-black spores under the peeled off bark. These spores can cause maple bark disease (MBD) in humans, a hypersensitivity pneumonitis (HP) with similar symptoms like COPD, allergic asthma, influenza or flu-like infections and interstitial pneumonia. Persons who have intensive respectively occupational contact with infested trees or wood, e.g., woodman, foresters, sawyers or paper mill workers, are at risk in particular. Since C. corticale favours hot summers and host trees weakened by drought, SBD will increasingly spread in the future due to ongoing climate change. Consequently, the risk of developing MBD will increase, too. As with all HPs, e.g., farmer’s lung and pigeon breeder’s disease, the diagnosis of MBD is intricate because it has no clear distinguishing characteristics compared to other interstitial lung diseases. Therefore, the establishment of consistent diagnosis guidelines is required. For correct diagnosis and successful therapy, multidisciplinary expertise including pulmonologists, radiologists, pathologists and occupational physicians is recommended. If MBD is diagnosed in time, the removal of the triggering fungus or the infested maple wood leads to complete recovery in most cases. Chronic HP can lead to lung fibrosis and a total loss of lung function culminating in death. HP and, thus, MBD, is a disease with a very high occupational amount. To avoid contact with spores of C. corticale, persons working on infested wood or trees have to wear personal protective equipment. To protect the public, areas with infested maples have to be cordoned off, and the trees should be removed. This is also for impeding further spreading of the spores.
We examine the photoinduced excited state dynamics of pyrene modified adenosine, a versatile probe for folding and hybridization of ribonucleic acids. Measurements in different solvents revealed complex ultrafast dynamics, but high robustness since the overall fluorescence quantum yield (Φf) is hardly affected. The result is a strong fluorescent RNA-probe whose spectral properties change in a defined way upon environmental changes.
Abstract
Indoor air pollution with harmful particulate matter (PM) is mainly caused by cigarette smoke. Super-Slim-Size-Cigarettes (SSL) are considered a less harmful alternative to King-Size-Cigarettes (KSC) due to longer filters and relatively low contents. We ask if “Combined Mainstream and Sidestream Smoke” (CMSS)-associated PM levels of SSL are lower than of KSC and thus are potentially less harmful. PM concentrations in CMSS (PM10, PM2.5, and PM1) are measured from four cigarette types of the brand Vogue, using an “automatic-environmental-tobacco-smoke-emitter” (AETSE) and laser aerosol spectrometry: SSL-BLEUE, -MENTHE, -LILAS and KSC-La Cigarette and -3R4F reference. This analysis shows that SSL MENTHE emitted the highest amount of PM, and KSC-La Cigarette the lowest. 3R4F reference emitted PM in the middle range, exceeding SSL BLEUE and falling slightly below SSL LILAS. It emerged that PM1 constituted the biggest proportion of PM emission. The outcome shows significant type-specific differences for emitted PM concentrations. Our results indicate that SSL are potentially more harmful for passive smokers than the respective KSC. However, this study cannot give precise statements about the general influence of the size of a cigarette on PM. Alarming is that PM1 is responsible for the biggest proportion of PM pollution, since smaller particles cause more harmful effects.
Objective: Inhaled particulate matter (PM) in secondhand smoke (SHS) is deleterious for smokers and non-smokers. Different additives in cigarettes might effect the amount of PM. This study aimed to assess the influence of additives on the PM emissions from different cigarette types in SHS.
Design: An experimental study of PM measuring in SHS of cigarettes without exposition of any person.
Method: The concentrations of PM (PM10, PM2.5 and PM1) in SHS of four different types of cigarettes of the brand Lucky Strike, two types with additives (Original Red, Original Blue) and two types without additives (Straight Red, Straight Blue), in comparison to the reference cigarette 3R4F were analysed. An automatic environmental tobacco smoke emitter generated SHS in an enclosed space with a volume of 2.88 m3. PM was measured with a laser aerosol spectrometer (Grimm model 1.109). Afterwards, the measuring values of the four Lucky Strike brands and the reference cigarette were statistically evaluated and visualised.
Results: Lucky Strike Straight Blue, a cigarette type without additives and lower tar amount, showed 10% to 25% lower PM mean values compared with the other tested Lucky Strike products, but 21% (PM1) respectively 27% (PM2.5,PM10) higher mean values than the reference cigarette. The PM mean of all measured smoke-free baseline values (clean air) was 1.6 µg/m³. It increased up to about 1800 µg/m³ for the reference cigarette and up to about 3070 µg/m³ for the Lucky Strike Original Blue.
Conclusions: The findings of this study show the massive increase of PM amount by smoking cigarettes in enclosed spaces and suggest that additives in tobacco products increase the PM amount in SHS. For validation, further comparative studies are necessary focusing on the comparison of the PM concentration of cigarettes with and without additives.
Implications: Due to the exposure to SHS, 890 000 people die each year worldwide. PM in SHS endangers the health of both non-smokers and smokers. This study considers the effect of additives like aromatics and humectant agents in cigarettes on PM in SHS. Do additives in tobacco products increase the amount of PM?
The inhalation of particulate matter (PM) in second-hand smoke (SHS) is hazardous to health of smokers and non-smokers. Tobacco strength (amount of tar, nicotine, and carbon monoxide) and different additives might have an effect on the amount of PM. This study aimed to investigate the influence of tobacco strength or additives on PM. Four cigarette types of the brand Marlboro with different strengths and with or without additives were analyzed in comparison to the 3R4F reference cigarette. SHS was generated by an automatic environmental tobacco smoke emitter (AETSE) in an enclosed space with a volume of 2.88 m³. PM concentrations (PM10, PM2.5, PM1) were measured with a laser aerosol spectrometer followed by statistical analysis. The two strongest Marlboro brands (Red and Red without additives) showed the highest PM concentrations of all tested cigarettes. The measured mean concentrations Cmean of PM10 increased up to 1458 µg/m³ for the Marlboro Red without additives (PM2.5: 1452 µg/m³, PM1: 1263 µg/m³). The similarly strong Marlboro Red showed very similar PM values. The second strongest type Marlboro Gold showed 36% (PM10, PM2.5) and 32% (PM1) lower values, respectively. The “lightest” type Marlboro Silver Blue showed 54% (PM10, PM2.5) or 50% (PM1) lower PM values. The results indicate that the lower the tar, nicotine, and carbon monoxide amounts, as well as the longer the cigarette filter, the lower are the PM levels. An influence of additives could not be determined.