Refine
Year of publication
- 2021 (27) (remove)
Document Type
- Doctoral Thesis (27) (remove)
Has Fulltext
- yes (27)
Is part of the Bibliography
- no (27)
Keywords
- 2D materials (1)
- ALICE upgrade (1)
- Astrophysics (1)
- Bohmian mechanics (1)
- CBM Experiment (1)
- Color superconductivity (1)
- Control System (1)
- EPICS (1)
- FEBID (1)
- Gravitational Waves (1)
Institute
- Physik (27) (remove)
The main focus of research in the field of high-energy heavy-ion physics is the study of the quark-gluon plasma (QGP). Topic of the present work is the measurement of electron-positron pairs (dielectrons), which grant direct access to some of the key properties of this state of matter, since after their formation they leave the hot and dense medium without significant interaction. In particular, the measurement of the initial QGP temperature is considered a "holy grail" of heavy-ion physics. Therefore, in addition to the analysis of existing data, a feasibility study has been conducted to determine to which extent this goal would be achievable by upgrading the ALICE experiment at CERN.
Dielectrons are produced during all stages of a heavy-ion collision, with their invariant mass reflecting the amount of energy available at the time of their formation. Dielectrons of highest mass are thus produced in the initial scatterings of the colliding nuclei by quark-antiquark annihilation. Correlated electron-positron pairs can also emerge from the decay chains of early-produced pairs of heavy-flavour (HF) particles. During the QGP stage and at the beginning of the hadronic phase, the system emits thermal radiation in the form of photons and dielectrons, which carry information about the medium temperature to the observer. In the final stage of the collision, decays of light-flavour (LF) hadrons produce additional contributions to the dielectron spectrum.
The present work is based on early data from the ALICE experiment recorded from lead-lead collisions at a center-of-mass energy of 2.76 TeV. Due to the limited amount of data, a focus is placed on achieving high efficiencies throughout the analysis. To this end, a special electron identification strategy is developed and a custom track selection applied, together resulting in a tenfold increase in pair efficiency. The dielectron spectrum is evaluated on a statistical basis, using a pair prefilter, which is optimized based on two signal quality criteria, to reduce the fraction of electrons and positrons from unwanted sources at minimum signal loss. In addition, an artifact of the track reconstruction is exploited to suppress pairs from photon conversions and to correct the dielectron yield for a contribution from different-conversion pairs. The main signal uncertainty is extracted from the deviation between results of 20 analysis settings and amounts to 20% in most of the studied kinematic range.
For comparison with the analysis results, a hadronic cocktail consisting of the LF and HF contributions is simulated, which can reasonably well describe the measured dielectron production, with a hint of an enhancement at low invariant mass. Two approaches to model the in-medium modification of the heavy-flavour are followed, resulting in up to 50% suppression, which creates some additional space for a thermal contribution at intermediate mass.
For a complete comparison between experimental data and theoretical expectation, two model calculations are consulted. The Thermal Fireball Model provides predictions for thermal dielectron radiation from the QGP and hadron gas. The data tends to be better described with these additional thermal contributions. For a comparison with a prediction by the UrQMD model, the HF component of the cocktail is subtracted from the data. This results in better agreement if the HF suppression by in-medium effects is taken into account.
The feasibility study in this work has served as a physical motivation for the ALICE upgrade for LHC Run 3. The precision with which the early temperature of the QGP can be determined via dielectrons is chosen as key observable. A multitude of individual contributions are merged into a fully modeled dielectron analysis. The resulting signal-to-background ratio represents some of the expected systematic uncertainties, while from the significance combined with the planned number of lead-lead collisions a realistic "measurement" with statistical fluctuations around the expected dielectron signal is generated using a Poisson sampling technique. Since the HF yield exceeds the QGP thermal radiation by about an order of magnitude, an additional analysis step exploiting the enhanced track reconstruction is introduced to reduce its contribution by up to a factor of five. The resulting reduction in pair efficiency is overcompensated by an up to hundred times higher collision rate. The entire cocktail is then subtracted from the sampled data to isolate the thermal excess yield. The final analysis of this spectrum shows that the inverse slope of the model prediction, which depends directly on the QGP temperature, can be reproduced within statistical and systematic uncertainties of about 10%.
The promising results of this study have contributed on the one hand to the realization of the ALICE upgrade and to a design decision for the new Inner Tracking System, and at the same time represent exciting predictions for upcoming measurements.
Das Feld der Hochenergie-Schwerionenforschung hat sich der Untersuchung des Quark-Gluon-Plasmas (QGP) gewidmet. Ein QGP ist ein sehr heißer und dichter Materiezustand, der kurz nach dem Urknall für einige Mikrosekunden das Universum füllte. Unter diesen extremen Bedingungen sind die fundamentalen Bausteine der Materie, die Quarks und Gluonen, quasi frei, also nicht in Hadronen eingeschlossen, wie es unter normalen Bedingungen der Fall ist. Hadronen sind Teilchen, die aus Quarks und Gluonen bestehen. Die bekanntesten Hadronen sind Protonen und Neutronen, die Bestandteile von Atomkernen, aus denen, zusammen mit Elektronen, die gesamte bekannte Materie aufgebaut ist.
Um ein QGP im Labor zu erzeugen, lässt man ultrarelativistische schwere Ionen, wie zum Beispiel Pb-208-Kerne, aufeinander prallen. Dies geschieht am CERN, dem größten Kernforschungszentrum der Welt. Der Teilchenbeschleuniger, welcher Protonen und Pb-Kerne beschleunigt und zur Kollision bringt, heißt Large Hadron Collider (LHC) und ist mit 27 km Umfang der größte der Welt. Bei einer einzigen Pb-Pb Kollision am LHC werden mehrere Tausend Teilchen und Antiteilchen erzeugt. Das dedizierte Experiment zur Untersuchung von Schwerionenkollisionen am LHC ist ALICE. ALICE ist mit mehreren Teilchendetektoren ausgerüstet, die es ermöglichen, tausende Teilchen gleichzeitig zu messen und zu identifizieren.
Unter den produzierten Teilchen befinden sich auch leichte Atomkerne, wenngleich diese nur sehr selten erzeugt werden. Die Anzahl der produzierten Teilchen pro Teilchensorte hängt nämlich von deren Masse ab. In Pb-Pb Kollisionen am LHC sinkt die Anzahl der produzierten (Anti)kerne exponentiell um einen Faktor 1/330 bei Hinzufügen jedes weiteren Nukleons. Die Menge an produzierten Teilchen pro Spezies stellt Informationen über den Produktionsmechanismus beim Übergang vom QGP zum Hadrongas zur Verfügung. Hierbei sind leichte (Anti)kerne von besonderem Interesse, da sie vergleichsweise groß sind und ihre Bindungsenergie bis zu zwei Größenordnungen kleiner ist als die Temperaturen, die bei der Erzeugung der Hadronen vorherrschen. Es ist bis heute noch nicht verstanden, wie leichte (Anti)kerne bei diesen Bedingungen erzeugt werden und überleben können.
Für diese Arbeit wurden ca. 270 Millionen Pb-Pb Kollisionen bei einer Schwerpunktsenergie von 5,02 TeV, die von ALICE im November 2018 aufgezeichnet wurden, analysiert. Es wurde die Produktion von (Anti)triton und (Anti)alpha untersucht. Wegen ihrer großen Masse werden beide Kerne sehr selten produziert, bei weitem nicht bei jeder Kollision. Antialpha ist der schwerste Antikern, der jemals gemessen wurde. Aufgrund dieser Seltenheit ist die Größe des zur Verfügung stehenden Datensatzes entscheidend. Es war möglich, das erste jemals gemessene Antialpha-Transversalimpulsspektrum zu extrahieren. Auch für (Anti)triton und Alpha wurden Transversalimpulsspektren bestimmt.
Die Ergebnisse wurden mit theoretischen Modellen und anderen ALICE Messungen verglichen.
Am Ende wird in einem Ausblick auf das kürzlich durchgeführte Upgrade der ALICE Spurendriftkammer (TPC) eingegangen. In der nächsten, bald startenden Datennahmeperiode wird der LHC seine Kollisionsrate erheblich erhöhen, was es ermöglichen wird, mehr als 100 mal so viele Daten wie bisher aufzuzeichnen. Hiervon werden die in dieser Arbeit beschriebenen (Anti)triton- und (Anti)alpha-Analysen beachtlich profitieren. Um mit den erheblich höheren Kollisionsraten zurecht zu kommen, mussten einige Detektoren, unter anderem die TPC, maßgeblich erneuert werden. In den ersten beiden Datennahmeperioden wurde die TPC mit Vieldrahtproportionalkammern betrieben. Diese sind allerdings viel zu langsam für die geplanten Kollisionsraten. Deshalb wurden sie im Jahr 2019, während einer langen Betriebspause des LHC, durch Quadrupel-GEM (Gas Electron Multiplier) Folien basierte Auslesekammern ersetzt, welche eine kontinuierliche Auslese der TPC ermöglichen. Da es sich um die erste jemals gebaute GEM TPC im Großformat handelt, war ein umfangreiches Forschungs- und Entwicklungs- (F&E) Programm notwendig, um die GEM Auslesekammern zu charakterisieren und zu testen. Im Rahmen dieses F&E Programms wurden am Anfang dieser Promotion systematische Messungen an einer kleinen Test TPC mit Quadrupel-GEM Auslese, die extra zu diesem Zweck gebaut worden war, durchgeführt. Hierbei wurde der Rückfluss der bei der Gasverstärkung erzeugten Ionen in das Driftvolumen der TPC und die Energieauflösung mit verschiedenen GEM Folien Typen und unterschiedlicher Anordnung gemessen. Das Ziel war, möglichst kleine Ionenrückflüsse bei möglichst guter Energieauflösung zu erreichen. Hierbei musste ein Kompromiss gefunden werden, da die beiden Größen sich gegenläufig verhalten. Es war jedoch möglich, mit mehreren GEM Konfigurationen Spannungseinstellungen zu identifizieren, bei denen beide Größen den gewünschten Anforderungen entsprachen.
Die vorliegende Arbeit präsentiert Forschungsarbeiten basierend auf nanoskopischen Oberflächenmessungen an plasmonischen Metaoberflächen und zweidimensionalen Materialien, insbesondere dem halbleitenden Übergangsmetal-Dichalcogenid (TMDC) WS_2. Die Thesis ist in sieben Kapitel untergegliedert. Die Einleitung vermittelt einen Überblick über die treibenden Kräfte hinter der Forschung im Bereich der Nanophotonik an zweidimensionalen Materialsystemen. Die Untersuchung der Licht-Materie-Wechselwirkung an dünnen Materialgrenzflächen zieht sich als roter Faden durch die gesamte Arbeit.
Das zweite Kapitel beschreibt den experimentellen Aufbau, der für die Durchführung der nanoskopischen Messungen in dieser Arbeit implementiert wurde. Es werden theoretische Grundlagen, das Messprinzip und die Implementierung des optischen Rasternahfeldmikroskops (s-SNOM) skizziert. Außerdem wird ein Strom-Spannungs-Rasterkraftmikroskop (c-AFM) im Kontaktmodus genutzt, um elektrische Ströme auf mikroskopischen zweidimensionalen TMDC-Terrassen zu messen. In den darauffolgenden vier Kapiteln werden die Beiträge dieser Arbeit zur Untersuchung der Licht-Materie-Wechselwirkung auf der Nanoskala aus verschiedenen Perspektiven vorgestellt. Jedes Kapitel enthält eine kurze Einleitung, einen Theorieteil, Messdaten oder Simulationsergebnisse sowie eine Analyse; vervollständigt durch einen Schlussteil.
Die zentrale Arbeit an einer metallischen Metaoberfläche aus elliptischen Goldscheiben wird in Kapitel 3 vorgestellt. Der zugehörige Theorieteil führt in das Konzept von Oberflächen-Plasmon-Polaritonen (SPP) ein, das für den Forschungsbereich der Plasmonik im Allgemeinen wesentlich ist. Verschiedene Methoden zur Berechnung der Dispersionsrelation dieser Oberflächenmoden an ein- und mehrschichtigen Grenzflächen werden auf die untersuchte Metaoberflächenprobe angewendet. Das Modell sagt drei verschiedene Moden voraus, die sich an der Grenzfläche ausbreiten. Eine teil-gebundene ins Substrat abstrahlende Oberflächenmode sowie zwei vergrabene stark gebundene anisotrope Moden. Eine auf der Probe platzierte Nanokugel aus Silizium wird als radiale Anregungsquelle verwendet.
Der Vergleich mit s-SNOM-Nahfeldbildern zeigt, dass nur die schwach gebundene geführte Modenresonanz ausreichend angeregt wurde, um durch s-SNOM-Bildgebung nachgewiesen werden zu können. Die schwache Oberflächenbindung erklärt die scheinbar isotrope Ausbreitung auf der anisotropen Oberfläche. Die Beobachtung der verbleibenden stark eingegrenzten anisotropen vergrabenen Moden würde eine verbesserte tiefenempfindliche Auflösung des Systems erfordern, die im Prinzip für Schichtdicken von 20 nm möglich sein sollte. Darüber hinaus wirft die Beobachtung die Frage auf, ob die durch Impuls- und Modenvolumenanpassung der Nanokugel gegebene Anregungseffizienz einen ausreichenden Anregungsquerschnitt erzeugt, um nachweisbare vergrabene SPP-Moden zu erzeugen.
In Kapitel 4 wird die Idee der Visualisierung vergrabener elektrischer Felder mit s-SNOM fortgesetzt. Hier wird es auf die Untersuchung von WS_2 angewendet, einem zweidimensionalen TMDC-Material, welches Photolumineszenz zeigt. Durch die Strukturierung des Galliumphosphid-Substrats unter der hängenden Monolage, die von einer dünnen Schicht aus hBN getragen wird, wird die Photolumineszenzausbeute um den Faktor 10 erhöht. Dies wird durch den Entwurf einer lateralen DBR-Mikrokavität mit zusätzlich optimierter vertikaler Tiefe erreicht, die in das Substrat geätzt wurde.
Die hochauflösende Abbildung der elektrischen Feldverteilung im Resonator wird durch den Einsatz von s-SNOM ermöglicht, um die Verbesserung der Einkopplung durch diese beiden Ansätze zu bewerten. Es konnte festgestellt werden, dass die laterale Struktur überwiegend zur verstärkten Photolumineszenzausbeute beiträgt, während für die Einkopplung keine offensichtliche Verstärkung auf die vertikale Strukturoptimierung zurückgeführt werden konnte.
Das zweidimensionale Material WS_2 wird in Kapitel 5 erneut mit Hilfe von c-AFM untersucht. Unterschiedlich dicke Multilagen auf Graphen und Gold dienen als Tunnelbarrieren für vertikale Ströme zwischen Substrat und leitender c-AFM-Messpitze. Die Daten können mit einem Fowler-Nordheim-Modell mit Parametern für die Tunnelbreite und Schottky-Barrierenhöhen der beiden Grenzflächen erklärt werden. Die Messungen zeigen jedoch eine schwache Reproduzierbarkeit, was eine detailliertere Zusammenfassung der relevanten Fehlerquellen erfordert. In der Schlussfolgerung des Kapitels werden mehrere Schlüsselaspekte vorgeschlagen, die bei künftigen Messungen berücksichtigt werden sollten. Entscheidend ist, dass c-AFM sehr empfindlich auf die Adsorption von Wasserfilmen an der Probenoberfläche reagiert, worunter WS_2-Oberflächen unter Umgebungsbedingungen leiden...
High-energy astrophysics plays an increasingly important role in the understanding of our universe. On one hand, this is due to ground-breaking observations, like the gravitational-wave detections of the LIGO and Virgo network or the black-hole shadow observations of the EHT collaboration. On the other hand, the field of numerical relativity has reached a level of sophistication that allows for realistic simulations that include all four fundamental forces of nature. A prime example of how observations and theory complement each other can be seen in the studies following GW170817, the first detection of gravitational waves from a binary neutron-star merger. The same detection is also the chronological starting point of this Thesis. The plethora of information and constraints on nuclear physics derived from GW170817 in conjunction with theoretical computations will be presented in the first part of this Thesis. The second part goes beyond this detection and prepares for future observations when also the high-frequency postmerger signal will become detectable. Specifically, signatures of a quark-hadron phase transition are discussed and the specific case of a delayed phase transition is analyzed in detail. Finally, the third part of this Thesis focuses on the inclusion of radiative transport in numerical astrophysics. In the context of binary neutron-star mergers, radiation in the form of neutrinos is crucial for realistic long-term simulations. Two methods are introduced for treating radiation: the approximate state-of-the-art two-moment method (M1) and the recently developed radiative Lattice-Boltzmann method. The latter promises
to be more accurate than M1 at a comparable computational cost. Given that most methods for radiative transport or either inaccurate or unfeasible, the derivation of this new method represents a novel and possibly paradigm-changing contribution to an accurate inclusion of radiation in numerical astrophysics.
Classical light microscopy is one of the main tools for science to study small things. Microscopes and their technology and optics have been developed and improved over centuries, however their resolution is ultimately restricted physically by the diffraction of light based on its wave nature described by Maxwell’s equations. Hence, the nanoworld – often characterized by sub-100-nm structural sizes – is not accessible with classical far-field optics (apart from special x-ray laser concepts) since its lateral resolution scales with the wavelength.
It was not until the 20th century that various technologies emerged to circumvent the diffraction limit, including so-called near-field microscopy. Although conceptually based on Maxwell’s long known equations, it took a long time for the scientific community to recognize its powerful opportunities and the first embodiments of near-field microscopes were developed. One representative of them is the scattering-type Scanning Near-field Optical Microscope (s-SNOM). It is a Scanning Probe Microscope (SPM) that enables imaging and spectroscopy at visible light frequencies down to even radio waves with a sub-100-nm resolution regardless of the wavelength used. This work also reflects this wide spectral range as it contains applications from near-infrared light down to deep THz/GHz radiation.
This thesis is subdivided into two parts. First, new experimental capabilities for the s-SNOM are demonstrated and evaluated in a more technical manner. Second, among other things, these capabilities are used to study various transport phenomena in solids, as already indicated in the title.
On the technical side, preliminary studies on the suitability of the qPlus sensor – a novel scanning probe technology – for near-field microscopy are presented.
The scanning head incorporating the qPlus sensor–named TRIBUS – is originally intended and built for ultra-high vacuum, low temperature, and high resolution applications. These are desirable environments and properties for sensitive nearfield measurements as well. However, since its design was not planned for near-field measurements, several special technical and optical aspects have to be taken into account, among others the scanning tip design and a spring suspended measurement head.
In addition, in this thesis field-effect transistors are used as THz detectors in an s-SNOM for the first time. Although THz s-SNOM is already an emerging technology, it still suffers from the requirements of sophisticated and specialized infrastructure on both the detector and laser side. Field-effect transistors offer an alternative that is flexible, cost-efficient, room-temperature operating, and easy to handle. Here, their suitability for s-SNOM measurements, which in general require very sensitive and fast detectors, is evaluated.
In the scientific part of this thesis, electromagnetic surface waves on silver nanowires and the conductivity/charge carrier density in silicon are investigated. Both are completely different concepts of transport phenomena, but this already shows the general versatility of the s-SNOM as it can enter both fields. Silver nanowires are analysed by means of near-infrared radiation. Their plasmonic behaviour in this spectral region is studied complementing other simulations and studies in literature performed on them using for example far-field optics.
Furthermore, the surface wave imaging ability of the s-SNOM in the near-infrared regime is thoroughly investigated in this thesis. Mapping surface waves in the mid-infrared regime is widespread in the community, however for much smaller wavelengths there are several important aspects to be considered additionally, such as the smaller focal spot size.
After that, doped and photo-excited silicon substrates are investigated. As the characteristic frequencies of charge carriers in semiconductors – described by the plasma frequency and the Drude model – are within the THz range, the THz s-SNOM is very well suited to probe their behaviour and to reveal contrasts, which has already been shown qualitatively by numerous literature reports. Here, the photo-excitation enables to set and tune the charge carrier density continuously.
Furthermore, the analysis of all silicon samples focuses on a quantitative extraction of the charge carrier densities and doping levels ...
Ziel dieser Dissertation ist es, die Gleichgewichts- und Nichtgleichgewichts-Eigenschaften des stark wechselwirkenden QGP-Mediums nahe dem Phasenübergang unter extremen Bedingungen von hohen T und hohen Baryonendichten mit Hilfe der kinetischen Theorie im Rahmen von effektiven Modellen zu untersuchen. Wir werden zunächst die thermodynamischen und Transporteigenschaften des QGPs in der Nähe des Gleichgewichts auf der Basis des DQPM im Bereich moderater chemischer Baryonenpotentiale μB ≥ 0.5 GeV untersuchen. Insbesondere werden die EoS und die Schallgeschwindigkeit sowie die Transportkoeffizienten des QGP auf der Grundlage des DQPM bei endlichen T und μB berechnet. Transportkoeffizienten sind besonders interessant, da sie Informationen über die Wechselwirkungen im Medium erlauben, das im Gleichgewicht durch eine Temperatur T und ein chemisches Potential μB charakterisiert werden kann. Unter Berücksichtigung der Transportkoeffizienten und der EoS der QGP-Phase vergleichen wir unsere Ergebnisse mit verschiedenen Resultaten aus der Literatur, in denen Transportkoeffizienten des QGPs auf Basis von effektiven Modellen vorwiegend bei Null oder kleinem chemischen Potentialen untersucht wurden.
Darüber hinaus werden in Kapitel 3 die Gleichgewichtseigenschaften des QGPs und insbesondere die Auswirkungen der μB-Abhängigkeit der thermodynamischen und Transporteigenschaften des QGPs im Rahmen des erweiterten PHSD-Transportansatzes untersucht, der die vollständige Entwicklung des Systems einschließlich der partonischen Phase umfasst. Die Entwicklung des PHSD-Transportansatzes wird in der partonischen Phase erweitert, indem explizit die gesamt- und differentiellen partonischen Streuquerschnitte auf der Grundlage des DQPM berechnet und bei der tatsächlichen Temperatur T und dem baryonischen chemischen Potential μB in jeder einzelnen Raum-Zeit-Zelle, in der die partonische Streuung stattfindet, ausgewertet werden.
Um die Spuren der μB-Abhängigkeit des QGPs in den Observablen zu untersuchen, werden die Ergebnisse von PHSD5.0 (mit μB-Abhängigkeiten) mit den Ergebnissen von PHSD5.0 für μB = 0 sowie mit PHSD4.0, in dem die Massen/Breiten der Quarks und Gluonen sowie deren Wechselwirkungsquerschnitte nur von T abhängen, verglichen. Wir diskutieren die PHSD-Ergebnisse für verschiedene Observablen: (i) Rapiditäts- und pT -Verteilungen von identifizierten Hadronen für symmetrische Au+Au- und Pb+Pb- Kollisionen bei Energien von 30 AGeV (zukünftige NICA-Energie) sowie für die RHIC-Spitzenenergie von √sNN = 200 GeV; (ii) gerichteter Fluss v1 von identifizierten Hadronen für Au + Au bei invarianter Energie √sNN = 27 GeV und 200 GeV; (iii) elliptischer Fluss v2 der identifizierten Hadronen für Au+Au bei invarianten Energien √sNN = 27 und 200 GeV. Der Vergleich der "Bulk"-Observablen für Au+Au-Kollisionen innerhalb der drei PHSD-Einstellungen hat gezeigt, dass sie eine recht geringe Empfindlichkeit gegenüber den μB -Abhängigkeiten der Partoneigenschaften (Massen und Breiten) und ihrer Wechselwirkungsquerschnitte aufweisen, sodass die Ergebnisse von PHSD5.0 mit und ohne μB sehr nahe beieinander liegen. Nur im Fall von Kaonen, Antiprotonen ̄p und Antihyperonen ̄Λ + ̄Σ0 konnte ein kleiner Unterschied zwischen PHSD4.0 und PHSD5.0 bei den höchsten SPS- und RHIC-Energien festgestellt werden.
Wir finden nur geringe Unterschiede zwischen den Ergebnissen von PHSD4.0 und PHSD5.0 für die hier betrachteten hadronischen Observablen sowohl bei hohen als auch bei mittleren Energien. Dies hängt damit zusammen, dass bei hohen Energien, wo die Materie vom QGP dominiert wird, ein sehr kleines chemisches Baryonenpotential μB in zentralen Kollisionen bei mittlerer Rapidität gemessen wird, während mit abnehmender Energie und größerem μB der Anteil des QGPs rapide abnimmt, sodass die endgültigen Beobachtungswerte insgesamt von den Hadronen dominiert werden, die an der hadronischen Rückstreuung teilgenommen haben, und somit die Information über ihren QGP-Ursprung verwaschen oder verloren geht.
In Kapitel 4 betrachten wir die Transportkoeffizienten von QGP-Materie im erweiterten Polyakov-NJL-Modell entlang der Übergangslinie für moderate Werte des chemischen Baryonenpotenzials 0 ≤ μB ≤ 0.9 GeV sowie in der Nähe des kritischen Endpunkts(CEP) und bei großem chemischen Baryonenpotenzial μB = 1.2 GeV, wo ein Phasenübergang erster Ordnung stattfindet. Wir untersuchen, wie die Natur der Freiheitsgrade die Transporteigenschaften des QGPs beeinflusst. Darüber hinaus demonstrieren wir die Auswirkungen des Phasenübergangs erster Ordnung und des CEP auf die Transportkoeffizienten im dekonfinierten QCD-Medium.
Darüber hinaus wird in Kapitel 5 eine phänomenologische Erweiterung des DQPM auf große baryonchemische Potentiale μB einschließlich der Region mit einem möglichen CEP und späterem Phasenübergang erster Ordnung betrachtet. Eines der wichtigsten Merkmale des Modells ist das Auftreten einer ’kritischen‘ Skalierung in der Nähe des CEP. Das Hauptziel des vorgestellten Modells besteht darin, die mikroskopischen und makroskopischen Eigenschaften der partonischen Freiheitsgrade für den Bereich des Phasendiagramms bereitzustellen, der durch moderates T und moderates oder hohes μB gekennzeichnet ist.
...
The putative effects of dark matter are most easily explained by a collisionless fluid on cosmological scales and by Modified Newtonian Dynamics (MOND) on galactic scales. Hybrid MOND dark matter models combine the successes of dark matter on cosmological scales and those of MOND on galactic scales. An example of such a model is superfluid dark matter (SFDM) which postulates that this differing behavior with scale is caused by a single underlying substance with two phases. In this thesis, I highlight successful observational tests of SFDM regarding strong lensing and the Milky Way rotation curve. I also discuss three problems due to the double role of the aforementioned single underlying substance and show how these may be avoided. Finally, I introduce a novel Cherenkov radiation constraint for hybrid MOND dark matter models. This constraint is different from standard modified gravity Cherenkov radiation constraints because such hybrid models allow even non-relativistic objects like stars to emit Cherenkov radiation.
An investigation of photoelectron angular distributions and circular dichroism of chiral molecules
(2021)
The present work demonstrates the capability of several type of molecular frame photoelectron angular distributions (MFPADs) and their linked chiroptical phenomenon the photoelectron circular dichroism (PECD) to map in great detail the molecular geometry of polyatomic chiral molecules as a function of photoelectron energy. To investigate the influence of the molecular potential on the MFPADs, two chiral molecules were selected, namely 2-(methyl)oxirane (C3H6O, MOx, m = 58,08 uma) and 2-(trifluoromethyl)oxirane (C3H3F3O, TFMOx, m = 112,03 uma). The two molecules differs in one substitutional group and share an oxirane group where the O(1s) electron was directly photoionized with the use of synchrotron radiation in the soft X-ray regime. The direct photoionization of the K-shell electron is well localized in the molecule and it induces the ejection of two or more electrons; the excited system separates into several charged (and eventually neutral) fragments which undergo Coulomb explosion due to their charges. The electrons and the fragments were detected using the COLd Target Recoil Ion Momentum Spectroscopy (COLTRIMS) and the momentum vectors calculated for each fragment belonging from a single ionization. The former method gives the possibility to post-orient molecules in space, giving access to the molecular frame, thus the MFPAD and its related PECD for multiple light propagation direction.
Stereochemistry (from the Greek στερεο- stereo- meaning solid) refers to chemistry in three dimensions. Since most molecules show a three-dimensional structure (3D), stereochemistry pervades all fields of chemistry and biology, and it is an essential point of view for the understanding of chemical structure, molecular dynamics and molecular reactions. The understanding of the chemistry of life is tightly bounded with major discoveries in stereochemistry, which triggered tremendous technical advancements, making it a flourishing field of research since its revolutionary introduction in late 18th century. In chemistry, chirality is a brunch of stereochemistry which focuses on objects with the peculiar geometrical property of not being superimposable to their mirror-images. The word chirality is derived from the Greek χειρ for “hand”, and the first use of this term in chemistry is usually attributed to Lord Kelvin who called during a lecture at the Oxford University Junior Scientific Club in 1893 “any geometrical figure, or group of points, “chiral”, and say that it has chirality if its image in a plane mirror, ideally realized, cannot be brought to coincide with itself.”. Although the latter is usually considered as the birth of the word chirality, the concept underlying it was already present in several fields of science (above all mathematics), already proving the already multidisciplinary relevance of chirality across many field of science and beyond. Nature shows great examples of chiral symmetry on all scales. Empirically, it is possible to observe it at macroscopic scale (e.g. distribution of rotations of galaxies), down to the microscopic scale (e.g. structure of some plankton species), but it is at the molecular level where the number gets remarkable: most of the pharmaceutical drugs, food fragrances, pheromones, enzymes, amino acids and DNA molecules, in fact, are chiral. Moreover, the concept of chirality goes far beyond the mere spatial symmetry of objects being crucially entangled with the fundamental properties of physical forces in nature. The symmetry breaking, namely the different physical behaviour of a two chiral systems upon the same stimuli, is considered to be one of the best explanation for the long standing questions of homochirality in biological life, and ultimately to the chemical origin of life on Earth as we know it. Our organism shows high enantio-selectivity towards specific compounds ranging from drugs, to fragrances. Over 800 odour molecules commonly used in food and fragrance industries have been identified as chiral and their enantiomeric forms are perceived to have very different smells, as the well-know example of D- and L- limonene. Similarly, responses to pharmaceuticals drugs can be enantiomer specific, and in fact about 60 % the drugs currently on the market are chiral compounds, and nearly 90 % of them are sold as racemates. The same degree of enantio-selectivity is observed in the communications systems of plants and insects. Plants produce lipophilic liquids with high vapour pressure called plant volatiles (PVs) which are synthesized via different enzymes called tarpene synthases that are usually chiral. Chiral molecules and chiral effects have a strong impact on all the fields of science with exciting developments ranging from stereo-selective synthesis based on heterogeneous enantioselective catalysis, to optoelctronics, to photochemical asymmetric synthesis, and chiral surface science, just to cite a few.
Chiral molecules come in two forms called enantiomers. Their almost identical chemical and physical properties continue to pose technical challenges concerning the resolution of racemic mixtures, the determination of the enantiomeric excess, and the direct determination of the absolute configuration of an enantiomer. ...
This thesis deals with the phenomenology of QCD matter, its aspects in heavy ion collisions and in neutron stars. The first half of the work focuses on the hadronic phase of QCD matter. One focus is on how the hadronic phase shows itself in heavy ion collisions and how its dynamics can be simulated. The role of hadronic interactions is considered in the context of the lattice QCD data. The second part of this thesis presents a unified approach to QCD matter, the CMF model. The CMF model incorporates many aspects of QCD phenomenology which allows for a consistent description of the hadron-quark transition, making it applicable to the entire QCD phase diagram, i.e., to the cold nuclear matter and to the hot QCD matter. It is shown that a description of both the hot matter created in heavy ion collisions and the cold dense matter in neutron star interiors is possible within one single approach, the CMF model.
Die vorliegende Dissertation behandelt das Thema der Wechselstromleitfähigkeit nano-granularer Metalle, welche mit Hilfe der fokussierten elektronenstrahlinduzierten Direktabscheidung (FEBID) hergestellt wurden, sowie der dielektrischen Relaxation in metall-organischen Gerüstverbindungen (MOFs). Sie war eingebettet in das interdisziplinäre Projekt „Dielectric and Ferroelectric Surface-Mounted Metal-Organic Frameworks (SURMOFs) as Sensor Devices“ im Rahmen des DPG-Schwerpunktsprogramms „Coordination Networks: Building Blocks for Functional Systems“ (SPP 1928, COORNETs). Dabei verfolgt sie ein Sensorkonzept zur selektiven Detektion von Analytgasen. Der zentrale Erfolg der Arbeit besteht dabei in neuen Erkenntnissen über die Wechselstromleitfähigkeit nano-granularer Pt(C)-FEBID-Deponate. Die hierbei gewonnen Erkenntnisse können in Zukunft einen weiteren Baustein in der theoretischen Beschreibung dieses grundlegend interessanten und für sensorische Anwendungen wichtigen Teilgebiets der Festkörperphysik darstellen.