Refine
Year of publication
- 2014 (25) (remove)
Document Type
- Doctoral Thesis (25) (remove)
Language
- English (25) (remove)
Has Fulltext
- yes (25)
Is part of the Bibliography
- no (25)
Keywords
- Beschleuniger (2)
- Radio Frequenz Quadrupol (2)
- Ageing (1)
- Chopper (1)
- Coulombdissoziation (1)
- Coulombspaltung (1)
- FAIR (1)
- Functional Renormalization Group (1)
- Gammaspectroscopy (1)
- Gammaspektroskopie (1)
Institute
- Physik (25) (remove)
Ultrafast protein dynamics are of great interest for understanding the molecular basis of biochemical function. One method to study structural changes with highest time-resolution starting in the femtosecond regime is 2D-IR spectroscopy. However its application to investigate protein dynamics both with high temporal and spatial resolution is currently limited to few biological systems with intrinsic chromophores. Spectral congestion, the contribution of many similar oscillators to the same signals, makes it difficult to draw conclusions about local structural dynamics in most other proteins.
The aim of this thesis is to extend the application of 2D-IR spectroscopy to a wider range of proteins by introducing unnatural amino acids (UAAs) with azide or nitrile groups as site-specific vibrational probes, which absorb in the free spectral window between 1800 to 3000 cm-1 by using methods from chemical biology.
In a comparative experimental study using FTIR and 2D-IR spectroscopy of single amino acids azidohomoalanine (Aha), a methionine analogue, was identified as preferred label. To demonstrate the application potential of UAAs as site-specific probes, Aha was then incorporated into different positions in a small globular protein. By using both FTIR and ultrafast 2D-IR it was shown, that indeed the local microenvironment as well as conformational fluctuations on picosecond timescale could be monitored with high spatial information. The azide moiety shows a shift of its absorption frequency depending on the polarity of its surrounding. Using this approach, different subensembles for the protein conformations with more polar and less polar environment around the vibrational probe can be distinguished.
A second major application of site-specific labels is the study of vibrational energy transfer processes (VET), predicted to be relevant for allosteric communication in protein domains such as the PDZ domain. VET can be tracked with high spatial resolution using time-resolved IR spectroscopy by exciting a localized vibrational mode and probing separate modes in a two-colour 2D-IR experiment. To extend this kind of experiment to proteins, a specific donor-acceptor pair of two UAAs was introduced. It uses an azulene moiety as donor that can be excited in the visible range but deposits the excess energy by internal conversion into the vibrational modes of the ground state. In small peptides this VET pair was applied successfully, showing a distance-dependent energy transfer induced signal for VET through covalent bonds. These findings bare great promise for the direct observation of vibrational energy flow in proteins in real-time.
Overall this thesis is the basis for extending the usability of 2D-IR spectroscopy to study structural dynamics in a wide range of proteins systems both with high temporal and spatial resolution.
Tuning and optimization of the field distribution for 4-rod radio frequency quadrupole linacs
(2014)
In this thesis, the tuning process of the 4-rod Radio Frequency Quadrupole has been analyzed and a theory for the prediction of the tuning plate's influence on the longitudinal voltage distribution was developed together with RF design options for the optimization of the fringe fields.
The basic principles of the RFQ's particle dynamics and resonant behavior are introduced in the theory part of this thesis. All studies that are presented are based on the work on four RFQs of recent linac projects. These RFQs are described in one chapter. Here, the projects are introduced together with details about the RFQ parameters and performance. In the meantime two of these RFQs are in full operation at NSCL at MSU and FNAL. One is operating in the test phase of the MedAustron Cancer Therapy Center and the fourth one for LANL is about to be built. The longitudinal voltage distribution has been studied in detail with a focus on the influence of the RF design with tuning elements and parameters like the electrodes overlap or the distance between stems. The theory for simulation methods for the field flatness that were developed as part of this thesis, as well as its simulation with CST MWS have been analyzed and compared to measurements. The lumped circuit model has proven to predict results with an accuracy that can be used in the tuning process of 4-rod RFQs. Together with results from the tuning studies, the studies on the fringe fields of the 4-rod structure lead to a proposal for a 4-rod RFQ model with an improved field distribution in the transverse and longitudinal electric field.
The present work deals with the integration of variable renewable energy sources, wind and solar energy into the European and US power grid. In contrast to other networks, such as the gas supply mains, the electricity network is practically not able to store energy. Generation and consumption therefore always have tobe balanced. Currently, the load curve is viewed as a rigid boundary condition, which must be followed by the generation system. The basic idea of the approach followed here is that weather-dependent generation causes a shift of focus of the electricity supply. At high shares of wind and solar generation, the role of the rigid boundary condition falls to the residual load, that is, the remaining load after subtraction of renewable generation. The goal is to include the weather dependence as well as the load curve in the design of the future electricity supply.
After a brief introduction, the present work first turns to the underlying weather-, generation and load data, which form the starting point of the analysis. In addition, some basic concepts of energy economics are discussed, which are needed in the following.
In the main part of the thesis, several algorithms are developed to determine the load flow in a network with a high share of wind and solar energy and to determine the backup supply needed at the same time. Minimization of the energy needed from controllable power plants, the capacity variable power plants, and the capacity of storing serve as guiding principles. In addition, the optimization problem of grid extensions is considered. It is shown that it can be formulated as a convex optimization problem. It turns out that with an optimized, international transmission network which is about four times the currently available transmission capacity, much of the potential savings in backup energy (about 40%) in Europe can be reached. In contrast, a twelvefold increase the transmission capacity would be necessary for a complete implementation of all possible savings in dispatchable power plants.
The reduction of the dispatchable generation capacity and storage capacity, however, presents a greater challenge. Due to correlations in the generation of time series of individual countries, it may be reduced only with difficulty, and by only about 30%.
In the following, the influence of the relative share of wind and solar energy is illuminated and examined the interplay with the line capacitance. A stronger transmission network tends to lead to a higher proportion of wind energy being better integrated. With increasing line capacity, the optimal mix in Europe therefore shifts from about 70% to 80% wind. Similar analyses are carried out for the US with comparable results.
In addition, the cost of the overall system can be reduced. It is interesting at this point that the advantages for the network integration may outweigh higher production costs of individual technologies, so that it is more favourable from the viewpoint of the entire system to use the more expensive technologies.
Finally, attention is given to the flexibility of the dispatchable power plants. Starting from a Fourier-like decomposition of the load curve as it was a few years ago, when hardly renewable generation capacity was present, capacities of different flexibility classes of dispatchable power plant are calculated. For this purpose, it is assumed that the power plant park is able to follow the load curve without significant surplusses or deficits. From this examination, it is derived what capacity must at least be available without having to resort to a detailed database of existing power plants.
Assuming a strong European cooperation, with a stronger international transmission network, the dispatchable power capacity can be significantly reduced while maintaining security of supply and generating relatively small surplusses in dispatchable power plants.
This thesis serves two main purposes:
1. The introduction of a novel experimental method to investigate phase change dynamics of supercooled liquids
2. First-time measurements for the crystallization behaviour for hydrogen isotopes under various conditions
1) The new method is established by the synergy of a liquid microjet of ~ 5 µm diameter and a scattering technique with high spatial resolution, here linear Raman spectroscopy. Due to the high directional stability and the known velocity of the liquid filament, its traveling axis corresponds to a time axis static in space. Utilizing evaporative cooling in a vacuum environment, the propagating liquid cools down rapidly and eventually experiences a phase transition to the crystalline state. This temporal evolution is probed along the filament axis, ultimately resulting in a time resolution of 10 ns. The feasibility of this approach is proven successfully within the following experiments.
2) A main object of study are para-hydrogen liquid filaments. Raman spectra reveal a temperature gradient of the liquid across the filament. This behaviour can quantitatively be reconstructed by numerical simulations using a layered model and is rooted in the effectiveness of evaporative cooling on the surface and a finite thermal conductivity. The deepest supercoolings achieved are ~ 30% below the melting point, at which the filament starts to solidify from the surface towards the core. With a crystal growth velocity extracted from the data the appropriate growth mechanism is identified. The crystal structure that initially forms is metastable and probably the result of Ostwald’s rule of stages. Indications for a transition within the solid towards the stable equilibrium phase support this interpretation.
The analog isotope ortho-deuterium is evidenced to behave qualitatively similar with quantitative differences being mass related.
In further measurements, isotopic mixtures of para-hydrogen and ortho-deuterium are investigated. It is found that the crystallization process starts earlier and lasts significantly longer compared to the pure substances with the maximum values between 20-50% ortho-deuterium content. A solely temperature based explanation for this effect can be excluded. The difference in the quantum character and hence effective size of the isotopes suggests a strong influence of the progressing liquid-solid-interface. Small dilutions of each para-hydrogen and ortho-deuterium with neon show an even more extended crystallization process compared to above isotopic mixtures. Additionally, the crystal is strongly altered in favor of the equilibrium lattice structure of neon.
In this thesis, different physical and electrical aspects of silicon microstrip sensors and low-mass multi-line readout cables have been investigated. These silicon microstrip sensors and readout cables will be used in the Silicon Tracking System (STS) of the fixed-target heavy-ion Compressed Baryonic Matter (CBM) experiment which is under development at the upcoming Facility for Antiproton and ion Research (FAIR) in Darmstadt, Germany. The highly segmented low-mass tracking system is a central CBM detector system to resolve the high tracking densities of charged particles originating from beam-target interactions. Considering the low material budget requirement the double-sided silicon microstrip detectors have been used in several planar tracking stations. The readout electronics is planned to be installed at the periphery of the tracking stations along with the cooling system. Low-mass multi-line readout cables shall bridge the distance between the microstrip sensors and the readout electronics. The CBM running operational scenario suggests that some parts of the tracking stations are expected to be exposed to a total integrated particle fluence of the order of 1e14 neq/cm2. After 1e14 neq/cm2 the damaged modules in the tracking stations will be replaced. Thus radiation hard sensor is an important requirement for the sensors. Moreover, to cope with the high reaction rates, free-streaming (triggerless) readout electronics with online event reconstruction must be used which require high signal-to-noise (SNR) ratio (i.e., high signal efficiency, low noise contributions). Therefore, reduction in noise is a major goal of the sensor and cable development.
For better insight into the different aspects of the silicon microstrip sensors and multi-line readout cables, the simulation study has been performed using SYNOPSYS TCAD tools. 3D models of the silicon microstrip sensors and the readout cables were implemented which is motivated by the stereoscopic construction of the silicon microstrip sensors. For the evaluation of the performance of the silicon microstrip sensors in the harsh radiation environment during experimental operation, a radiation damage model has been included. It reproduces the behavior of the irradiated CBM prototype sensors. In addition to the static characteristics, the interstrip parameters relevant to understand strip isolation and cross-talk issues have been extracted. The transient simulations have been performed to estimate the charge collection performance of the irradiated sensors. The signal transmission in the readout cables has been evaluated with the finite element simulation tool RAPHAEL. Based on the performance of the front-end electronics used for early prototyping in the CBM experiment, capacitive and resistive noise contributions from the silicon microstrip sensors and multi-line readout cables have been extracted.
To validate the aforementioned simulations, numerous tests have been performed both on the multi-line readout cables and silicon microstrip sensors. Characterizations of multi-line readout cables and silicon microstrip sensors in laboratory conditions have been found to agree reasonably well with the simulations. Considering the expected radiation environment the behavior of silicon microstrip sensors have been studied especially in terms of noise and charge collection efficiency. Source-scan of the silicon microstrip sensors using 241Am is presented. In order to test a first system of detector stations including the data acquisition system, slow control and online monitoring software and for track reconstruction, in-beam tests have been performed at the COSY synchrotron of the Research Center Juelich, Germany. Further, different design parameters have been suggested to improve the sensor and readout cable design on the basis of the simulations and the measurements. Many of these parameters have been implemented in the new prototypes under production. These new prototypes will be tested in-beam by the end of 2013.
The nature of spontaneous brain activity during wakefulness and sleep: a complex systems approach
(2014)
In this thesis we study the organization of spontaneous brain activity during wakefulness and all stages of human non-rapid eye movement sleep using an approach based on developments and tools from the theory of complex systems. After a brief introduction to sleep physiology and different theoretical models of consciousness, we study how the organization of cortical and sub-cortical interactions is modified during the sleep cycle. Our results, obtained by modeling global brain activity as a complex functional interaction network, show that the capacity of the human brain to integrate different segregated functional modules is diminished during deep sleep, in line with an informationintegration account of consciousness. We then show that integration is impaired not only across space but also in the temporal domain, by assesing the emergence of long-range temporal correlations in brain activity and how they are modified during sleep. We propose an encompassing explanation for this observation, namely, that the brain operatsat different dynamical regimes during different states of consciousness. Finally, we gather massive amounts of data from different collaborative projects and apply machine learning techniques to reveal that the \resting state" cannot be considered as a pure brain state and is in fact a mixture containing different levels of conscious awareness. This last result has deep implications for future attempts to develop a discovery science of brain function both in health and disease.
Within the nucleosynthetic processes of the slow neutron-capture reaction network (called the s process) the so called branching points, unstable isotopes where different nuclear reactions are competing, are important to understand . For modeling and calculating the nucleosynthesis and compare the resulting abundances to the observed ones, it is indispensable to know the branching ratios as well as the corresponding cross sections.
A great challenge in measuring those rates in experiments may be the radioactivity of the isotopes involved, which can make it nearly impossible to manufacture the needed targets. In addition, in stellar environments the excited states of isotopes can be in equilibrium with the ground state, affecting the half-lives and the branching ratios significantly. The isotope 152Eu is such a branching point, with neutron captures and β-decays competing. Those challenges were approached in the s405 experiment performed at the GSI Helmholtzzentrum für Schwerionenforschung GmbH: the challenge the challenge of the radioactivity can be approached by experiments carried out in inverse kinematics with radioactive beams, solving the problem of unstable targets. Also a reversed reaction was used to access the excited states of the studied isotope. The performed 152Sm(p,n)152Eu is a pioneering attempt to use those methods on heavy ions. The (p,n) reaction was used as a substitute for electron capture, the focus lies on reactions with low-momentum transfers, resulting in the emission of low-energy neutrons. The new developed low-energy detector array LENA was put to test for the fist time in the s405 experiment.
Das Schwerionenkollisionen Programm der Beschleuniger RHIC und LHC gibt Hinweise auf einen neuen Zustand hadronischer Materie --- das Quark-Gluon Plasma. Dieses zeichnet sich durch eine zumindest partielle Aufhebung des confinements aus, welches besagt, dass keine freien Quarks beochtbar sind.
Aus einer Beschreibung der experimentellen Daten mit relativistischer Hydrodynamik folgen weitere Eigenschaften. So geht das in einer Schwerionenkollision erzeugte Quark-Gluon Plasma nach sehr kurzer Zeit, etwa 1 fm/c, in ein zumindest lokales thermisches Gleichgewicht über. Durch die Lorentzkontraktion der beiden Schwerionen erwartet man, dass der Zustand direkt nach der Kollision durch eine Impulsanisotropie in der transversal-longitudinalen Ebene bestimmt wird. Somit setzt das Erreichen eines thermischen Gleichgewichts zunächst eine Isotropisierung voraus. Bisherige Studien haben gezeigt, dass gluonische Moden bei dieser Isotropisierung durch Verursachung einer chromo-Weibel Instabilität eine entscheidende Rolle spielen.
Weiterhin verhält sich das Quark-Gluon Plasma wie eine fast perfekte Flüssigkeit. Eine Berücksichtigung dissipativer Terme in der hydrodynamischen Beschreibung erfordert das Hinzufügen weiterer Terme zu den entsprechenden Bewegungsgleichungen. Diese sind proportional zu Transportkoeffizienten, welche durch die zugrunde liegende mikroskopische Theorie festgelegt sind.
Diese Theorie ist Quantenchromodynamik. Sie beschreibt die starke Wechselwirkung der Quarks und Gluonen und ist ein fundamentaler Baustein des Standardmodells der Teilchenphysik. Da im Regelfall Prozesse der starken Wechselwirkung nichtperturbativ sind, beschreiben wir QCD unter Verwendung einer Gitterregularisierung. Diese beruht auf einer Diskretisierung der vierdimensionalen Euklidischen Raumzeit durch einen Hyperkubus mit periodischen Randbedingungen und ermöglicht ein Lösen der QCD mit numerischen Methoden. Allerdings ist die Anwendung der Gittereichtheorie auf Systeme im thermischen Gleichgewicht beschränkt und kann somit keine Prozesse beschreiben, die auf Echtzeit basieren.
Transportkoeffizienten entsprechen Proportionalitätskoeffizienten, die die Relaxation einer Flüssigkeit oder eben eines Quark-Gluon Plasmas von einer kleinen Störung beschreiben. Damit sind sie unmittelbar mit der Zeit verknüpft. Über Kubo-Formeln lassen sie sich jedoch mit Gleichgewichtserwartungswerten retardierter Korrelatoren verknüpfen und werden so in Gitter QCD zugänglich.
In der vorliegenden Dissertation berechnen wir den Transportkoeffizienten κ in Gittereichtheorie für das Yang-Mills Plasma. Dabei nutzen wir aus, dass dieser Transportkoeffizient eine triviale analytische Fortsetzung vom retardierten zum Euklidischen Korrelator besitzt, welcher direkt in Gittereichtheorie zugänglich ist. Es ist die erste nichtperturbative Berechnung eines Transportkoeffizienten in QCD ohne weitere Annahmen, wie die Maximum Entropie Methode oder Ansätze, zu treffen.
In this thesis hard probes are studied in the partonic transport model BAMPS (Boltzmann Approach to MultiParton Scatterings). Employing Monte Carlo techniques, this model describes the 3+1 dimensional evolution of the quark gluon plasma phase in ultra-relativistic heavy-ion collisions by propagating all particles in space and time and carrying out their collisions according to the Boltzmann equation. Since hard probes are produced in hard processes with a large momentum transfer, the value of the running coupling is small and their interactions should be describable within perturbative QCD (pQCD). This work focuses on open heavy flavor, but also addresses the suppression of light parton jets, in particular to highlight differences due to the mass. For light partons, radiative processes are the dominant contribution to their energy loss. For heavy quarks, we show that also binary interactions with a running coupling and an improved Debye screening matched to hard-thermal-loop calculations play an important role. Furthermore, the impact of the mass in radiative interactions, prominently named the dead cone effect, and the interplay with the Landau-Pomeranchuk-Migdal (LPM) effect are studied in great detail. Since the transport model BAMPS has access to all medium properties and the space time information of heavy quarks, it is the ideal tool to study the dissociation and regeneration of J/psi mesons, which is also investigated in this thesis.
This thesis presents experimental studies of proton capture and fragmentation reactions with heavy-ion storage rings. In one experiment, the 96Ru(p, γ)97Rh cross sections near the Gamow window have been measured at the ESR of GSI. In the other experiment, the measurement of the fragmentation yields has been carried out at the CSRe of IMP.
It is essential to determine the cross sections of (γ, p) or (p, γ) reactions for p-process network calculations. However, only very few of the required cross sections have been measured and thus most of them rely solely on Hauser-Feshbach model predictions. The predictions of the model have always very large uncertainties because of the not well-known input parameters. These parameters can be constrained by experiments. Compared to the traditional activation technique, a novel method using a storage ring has been developed to measure the cross sections of (p, γ) reactions in inverse kinematics.
This proton capture experiment has been performed at the ESR, where the circulating 96Ru44+ ions interacted with a hydrogen gas target at 9, 10 and 11 MeV/u. The nuclear reaction products of (p, p), (p, α), (p, n) and (p, γ) reactions were registered by position sensitive detectors. A Geant4 simulation code has been developed to distinguish the (p, γ) reaction products unambiguously from the background reactions. In this work, a relative normalization method has been utilized to accurately determine the cross sections of the (p, γ) reaction. The 96Ru(p, γ)97Rh cross section in the Gamow window of the p process is sensitive to two parameters, i.e., the γ-ray strength function and the optical model potential, while it is mainly sensitive to the γ-ray strength function in the energy region of our experiment. Therefore, our experimental (p, γ) cross sections near 10 MeV/u have been used to directly constrain the γ-ray strength function used in the model. Furthermore, the proton potential has also been constrained by combining our results with additional experimental data for this reaction in the lower energy region. The constrained model has been used to calculate the reaction rate over a wide temperature range, which is an extremely important input for astrophysical calculations.
The yields of fragments produced by 78Kr fragmentation reactions have been measured at the CSRe for the Tz = −1/2 and Tz = 1/2 nuclei along or close to the paths of αp- and rp-processes. The measured yields present a significant odd-even staggering effect for Tz = −1/2 nuclides but they are small for Tz = 1/2 nuclides.
The magnitude of this effect for four consecutive yields has been quantified using a third-order difference formula. It is found that the largest odd-even staggering is reached near the closed shells Z = 20 and Z = 28. Our experimental results could also compared with the data from other experiments with different projectile-target combinations. All these experimental data strongly support the closed shells Z = 20 and Z = 28 for the Tz = −1/2 nuclei.