Refine
Year of publication
- 2017 (6) (remove)
Document Type
- Doctoral Thesis (6) (remove)
Has Fulltext
- yes (6)
Is part of the Bibliography
- no (6)
Keywords
- Africa (1)
- African Agency (1)
- Atmosphäre (1)
- Cameroon (1)
- China (1)
- Eiskeime (1)
- Eiskeimzähler (1)
- Geological Resources (1)
- Local Interests (1)
- Meteorologie (1)
Institute
- Geowissenschaften (6) (remove)
Over the last several decades, spinel-structured minerals with the chemical formula AB2O4 (where A and B stand for divalent and trivalent cations, respectively) have attracted more and more attention, particularly with regards to their breakdown at high pressures and temperatures and the nature of the so-called "post-spinel" phases. Spinel-structured phases with different endmember compositions, like magnetite (Fe3O4), hercynite (FeAl2O4) or spinel (MgAl2O4), are known to breakdown differently at high pressure-temperature conditions (e.g., Akaogi et al. 1999; Schollenbruch et al. 2010; Woodland et al. 2012). Such phases are of particular interest when they incorporate ferric (Fe3+) and ferrous (Fe2+) cations as this makes their stability sensitive to redox conditions. Since magnetite and magnesioferrite (MgFe3+ 2O4) have been found as inclusions in diamond (e.g., Stachel et al. 1998; Harte et al. 1999; Wirth et al. 2014; Palot et al. 2016; Jacob et al. 2016), understanding their phase relations is important for setting constraints on the conditions of their formation.
This study aimed to experimentally investigate the phase relations of Fe-Mg spinel-structured phases at conditions of the deep upper mantle and transition zone. Exploring the stability of new post-spinel phases and their characterization were also major goals of this study. Approaching a pyrolitic mantle composition by adding amounts of SiO2 in the system allowed constraints on the relevance of Fe-Mg post-spinel phases coexisting with mantle silicates to be made. ...
Indian Ocean came into existence with the breakup of Gondwana in the Mesozoic era. The presence of complex aseismic ridges and plateaus in the Indian Ocean makes it the least-understood of all the oceans. Mascarene Plateau, apart from Central Indian Ridge (CIR) running north-south between 2◦N and 25◦S in the Indian Ocean, is one such complex feature in the Indian Ocean that consists of Seychelles microcontinent in the north and the volcanic islands of Mauritius, La Réunion and Rodrigues in the south.
Most of the previous seismological studies on the islands of Mauritius, Rodrigues and Seychelles are restricted as each of them has only one operational permanent station. In the current study, I present the results obtained from the investigations of the seismological data obtained from the deployment of temporary seismic network on Mauritius (November, 2012–August, 2014) and Seychelles (March, 2013–March, 2015) under Réunion Hotspot and Upper Mantle–Réunions Unterer Mantel (RHUM–RUM) project and later in Rodrigues (September, 2014–June, 2016) under a collaborative project between Goethe-Universität, Frankfurt, Germany and Mauritius Oceanography Institute (MOI), Mauritius. Additional data from the permanent stations were also used in this study. The investigations and results are presented under three themes, namely: (1) crustal structure beneath Mauritius, (2) upper mantle anisotropy below Mauritius, Rodrigues and Seychelles and (3) intraplate seismicity in the Rodrigues–CIR region.
Upper mantle anisotropy in south-west Indian Ocean region are very limited, especially from the islands of Mauritius and Rodrigues. With the new data from the seismic stations deployed in Mauritius and Seychelles, under RHUM–RUM, and permanent stations in Rodrigues, I constrain the upper mantle flow pattern beneath these islands. From the joint-splitting analysis, I obtain fast-polarisation direction (φ) dominant in N80◦E and delay time (δt) of ≈0.85 s for Mauritius and φ tending east–west in Rodrigues with δt of ≈1.1 s. Parabolic asthenospheric flow model explains the orientation of the fast-polarisation direction beneath Mauritius, whereas deep mantle circulation patterns best explain the horizontal alignment of the fast-polarisation direction in Rodrigues. From Seychelles data, the results show φ trending NE and δt ≈0.74 s, even for the island close to Amirante Ridge, suggesting an asthenospheric deformation induced by relative motion between the plate and the deep mantle flow.
It has recently been suggested that the volcanic island of Mauritius may be underlain by a remnant of continental origin termed “Mauritia.” To constrain the crustal thickness beneathMauritius, I analysed data from 11 land stations, 10 of which were deployed recently under the RHUM–RUM project. From the recordings, I obtained 382 P-receiver functions. On the obtained receiver functions, I applied the H–κ stacking technique and derived the crustal thickness of ≈10–15 km. I observe a considerable variation in the VP/VS ratio caused by a lack of clear multiples. Using forward modelling of receiver functions, I show that the lack of clear multiples can be explained by a transitional Moho, where the velocity increases gradually. The modelling further indicates that the thickness of this gradient zone is estimated to be ≈10 km. I argue that my findings suggest oceanic crust thickened by crustal underplating due to the mantle plume currently located beneath La Réunion.
Seismicity around Rodrigues Island is generally associated with events recorded by the global networks along the CIR. Using seismological array techniques on the data collected by the temporary deployment of seismic array on Rodrigues Island for a period of 22 months (September, 2014–June 2016), 62 new events were located, which were not reported by any global network. Determination of backazimuth and apparent velocity were performed by applying array methods in the time-domain instead of the more conventional frequency-domain analysis. Event distances were calculated using a 1-D velocity model and the measured travel-time differences between S- and P-wave arrivals. Local magnitudes of the events were obtained by removing the velocity response from the seismographs and then convolving with Wood–Anderson transfer function to obtain ground motion in nanometers. Most of the newly-detected events are located off the ridge axis and can be classified as intraplate events. Three different seismic clusters were observed around the island. Most of the events were localised in the north-east of Rodrigues at a distance of ≈138 km from the reference station. A distinguishable swarm of earthquakes was observed on the west of the spreading segment from March to April 2015. The local magnitudes (ML) of the events varied between 1.6 and 3.7.
The African continent is regularly portrayed as an indolent space with a well-known reputation as a chaotic continent. Viewed as lacking vision, means and capacities, Africa is perceived at best as a place that is marked by a permanent status quo, stagnation, or in worst case scenarios, as a declining continent. Various references to the continent are synonymous with famine, poverty, war, etc. Such portrayals are all the more intriguing given that the continent is known for its abundant natural resources, such as timber, oil, natural gas, minerals, etc., whose reserves are, moreover, not well known both by the African people and their leaders. As a result, there is still much progress to be made in tapping into the resources in order to improve the daily lives of African citizens.
In such a context dominated by infantile carelessness throughout the continent, the interventions of actors from outside the continent are the only hopes of bringing some vitality to this continent which is cloaked in "la grande nuit – the great darkness" (Mbembé 2013). Thus during the main sequences of recent history, representing different forms of Western penetration and activity on the African continent (slavery, imperialism, colonization), all the Western world’s contributions have obviously not sufficed to boost Africa and take it out of its never ending childhood. It has remained just as passive and apathetic today as it was yesterday.
The attraction of Asian actors to the continent is even more recent. And consistent with its abovementioned indolence, Africa is seen as an easy and defenceless prey for the Korean, Japanese, Indian, Malaysian, or Chinese conquerors. In the latter case, the insatiable appetite for natural resources whose reserves are being rapidly depleted is the cornerstone of their foreign aid policy. This led China to colonize the continent, showing a preference for Pariah Regimes which held no appeal for the West, by sending an army of workers to extract those resources (Lum et al. 2009), in defiance of all national and international regulations and based on completely opaque contracts.
Although the concept of African Agency was rapidly developed in several African countries, the aim of this study was more specific to Cameroon’s mining sector in which different entrepreneurs from abroad got involved over time. The thesis investigates whether indigenous citizens took part in any way in the development of mining projects in the country. Thus, the work assesses and analyses actions and reactions initiated and undertaken by local people in the context of China’s presence within Cameroon’s mining sector to promote and advance their interests over those of foreign investors. In addition, the author has no knowledge of any other study investigating African Agency in the mining sector as a whole in Cameroon.
In conducting this study, a multi-method research framework was developed including a series of methods used to collect data and analyse concepts of African Agency associated Political Ecology as they developed within Cameroon’s mining sector. Specifically, those methods comprised quantitative research when it came to collecting data using a positivist and empirical approach constructed by deducing evidence from statistical data collected by means of the 167 questionnaire surveys administered to local inhabitants and workers randomly selected on mining sites and in riparian communities. The questionnaires helped to capture Cameroonians' perceptions of the recent phenomenon of the gradual but significant influx of international actors and precisely Chinese players in the mining sector on the one hand, and on the other hand, observational data was collected across the GVC as developed in the Betare-Oya region. As a complement to the former technique, qualitative methods helped to study and deepen understanding of human behaviour and the social world in a holistic perspective through individual interviews, focus groups, and direct observations on the ground. In addition, the spatial analysis method based on the land use classification technique served to detect changes to land use/land cover that have been brought on by mechanised mining activities undertaken in this region. The sequencing of data collected and their processing from a ground theory perspective led to the formulation and specification of Cameroon’s Ecological Agency theory.
One of the earliest steps of this work consisted in a literature review and in placing the African Agency concept in a broader context. It then led to the state of the art, specifications about research content of the work and the main theories undergirding this thesis. Before examining developments that emerged during the last decade, a historical perspective was provided to the topic in order to show how African societies started mining operations and how they dealt with foreign partners interested in their mining resources. The aim was to show that while Western imperialism presented a challenge for the sector, it did not erase local participation, even despite the constraints associated with such involvement.
...
The present PhD thesis comprises structural geology, petrographic and geochronological investiga-tions on crystalline rocks of the Uppermost Unit in the southern Aegean realm. Studies were carried out in three areas: (1) on the island of Anafi, (2) in the area west of Melambes in central Crete and (3) between the villages of Pefkos, Kalami and Sykologos in the municipality of Viannos in eastern Crete.
The Uppermost Unit forms together with the underlying, non-metamorphic Pindos Unit the upper nappe system of the Cretan nappe pile that, unlike the units of the lower nappe system, was not affected by Late Oligocene to Early Miocene subduction-related metamorphism. The upper nappe system must therefore have been at upper levels of the lithosphere in the Late Oligocene. This is of particular im-portance when reconstructing the tectonometamorphic evolution of the Uppermost Unit. The Upper-most Unit is very heterogeneous in composition and is subdivided into several subunits, which differ mainly in their lithological composition and the degree of metamorphic overprint. Usually, it is subdi-vided into several low-grade metamorphic subunits and one high-grade metamorphic subunit. Within the scope of this PhD thesis, three of these subunits were examined; (1) the anchimetamorphic Arvi Unit, (2) the newly described Greenschist Unit and (3) the Asterousia Crystalline Complex (ACC).
The analyses conducted during this PhD thesis include: (1) structural geology investigations in the field, (2) microstructural and petrographic analyses on thin sections, (3) radiometric dating of zircons using isotope dilution thermal ionisation mass spectrometry (ID-TIMS) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), (4) electron microprobe (EMP) analysis, (5) quartz texture analysis using electron-backscattered diffraction (EBSD), (6) semiquantitative analysis of min-eral phases using X-ray powder diffraction (XRD), (7) analysis of the modal composition of intrusive rocks applying point counting on thin sections and (8) X-ray microtomography (micro-CT) on chias-tolite hornfels.
...
The East African Rift System (EARS) was initiated in the Eocene epoch between 50 and 21 Ma probably due to the influence of mantle plumes that caused volcanism, flood basalts and rifting extensions in Ethiopa and the Afar region. As a result of magmatic intrusions and adiabatic decompression melting within the lithosphere caused by the impact of the Kenya plume, there was a southward propagation of the EARS of about 30 – 15 Ma from Ethiopia to Kenya, which coincide with the occurrence of volcanism. The EARS developed towards the south along the margins of the Tanzania Craton between 15 and 8 Ma. Previous findings of low-velocity anomalies within the upper mantle and the mantle transition zone indicate an upwelling of hot mantle material in the vicinity of the Afar region and the East African Rift. This study includes the analysis of P- and S-receiver functions in order to determine further impacts on the lithosphere from below. The aim was to determine the topographic undulations of further boundary layers and to identify their variability owing to the rifting processes and the formation of the EARS. The study area included the Tanzania Craton and the surrounding rift branches of the East African Rift System.
The region of the Rwenzori Mountains can be analysed in detail because of the large dataset of the RiftLink project. The use of the P-receiver function technique and the H-K stacking method enabled to determine different vP /vS ratios depending on the tectonic setting in the Rwenzori region: Rift shoulders (vP /vS =1.74), Albert Rift segment (vP /vS =1.80), Edward Rift segment (vP /vS =1.87) and Rwenzori Mountains (vP /vS =1.86). To determine the topography of the Moho, it is necessary to take into account the thickness of the sedimentary layer, the surface topography, the azimuthal variations in crustal thickness and the impact of local anomalies. After correcting these effects on the Moho depths, significant variations in Moho topography could be determined. The Moho depths range from 29 to 39 km beneath the rift shoulders of the Albertine Rift. Within the rift valley, the crustal thickness varies between 25 – 31 km in the Edward Rift segment and 22 – 30 km in the Albert Rift segment. An averaged crustal thickness of about 26 km within the rift valley indicates the lack of the crustal root beneath the Rwenzoris. Similar variations in crustal thickness were determined by using an automatic procedure for analysing S-receiver functions that was developed in this study.
The S-receiver functions are created by applying a rotation criterion in order to rotate the Z, N and E components into the L, Q and T components. It is necessary to perform trial rotations using different incident and azimuth angles to determine the correct rotation angles. The latter are identified by the use of the rotation criterion, including the amplitude ratio of the converted Moho signal to the direct S/SKS-wave signal. The L component is rotated correctly in the direction of the incident shear wave in the case of the maximum amplitude ratio. After analysing the frequency content of the receiver functions in order to sort out harmonic and long-periodic traces, the individual Moho signals are checked for consistency in order to remove atypic signals. To increase the signal-to-noise ratios on the traces, the S-receiver functions are stacked. For this purpose, the signals of the direct shear waves must originate from similar epicenters. On the basis of similar ray paths, the receiver functions show comparable waveforms and converted signals. To perform the stacking procedure, it is necessary to merge the datasets of the adjacent stations in order to obtain a sufficient number of receiver functions. This analysis is based on the assumption that the incident seismic waves arriving at the adjacent stations penetrate to some extent the same underground structures in the case of similar wave propagation paths. This approach accounts for the fact that the converted signals do not result exclusively from the piercing points at the boundary layers. Further signals originate from the conversions at the boundary layer within the Fresnel Zone. The piercing points are derived from the significant signals in the receiver functions. Depending on the order of arrival of the converted phases on the traces, the signals are attributed to the theoretical discontinuities DIS1, DIS2, DIS3 and DIS4. However, partly due to the low signal-to-noise ratios on the traces, it is difficult to identify the real conversions on the traces and to ensure that the converted signals are attributed to the correct boundary layers. For this reason, it is necessary to check the consistency of the conversion depths among each other. In the case of inconsistent conversion depths, the corresponding signals are either adjusted to another seismic boundary layer or removed from the dataset. To verify the functionality of the automatic procedure and to determine the resolvability with respect to two boundary layers, several models are tested including horizontal and dipping discontinuities. To resolve distinct discontinuities, their depths must differ by at least 60 km, otherwise, due to similar depth ranges of the different boundary layers, the converted signals cannot be separated from each other. As a consequence, the converted signals that originate from different discontinuities are attributed to a single one. Further tests including break-off edges of seismic discontinuities are performed to check the attributions of the converted signals to the discontinuities. Owing to the varying number of boundary layers, the converted signals cannot be attributed to the discontinuities according to the order of their arrivals on the traces. It is necessary to correct their attributions to the seismic discontinuities in order to resolve the boundary layers.
The crust-mantle boundary and further discontinuities within the lithospheric mantle are investigated by applying this automatic procedure. Depending on the tectonic setting, the conversion depths of the Moho range from about 30 – 45 km beneath the western rift shoulder to 20 – 35 km within the rift valley up to 30 – 40 km beneath the eastern rift shoulder. The long wavelengths of the shear waves hamper the correct identification of the converted phases in the S-receiver functions. With respect to the relative differences in conversion depth, the topographic undulations of the crust-mantle boundary are consistent with the Moho depths derived from P-receiver functions. In contrast to the Rwenzori region, it is difficult to resolve completely the trend of the Moho in the remaining area of the East African Rift due to the small dataset provided by IRIS. The results exibit an increase in crustal thickness to up to 45 km in the region of the Cenozoic volcanics such as Virunga, Kivu, Rungwe and Kenya. The greatest Moho depths of more than 50 km are located near Mount Kilimanjaro. In addition to the Moho, the analysis of the S-receiver functions revealed two further boundary layers at depths of 60 – 140 km and 110 – 260 km, which are associated with a mid-lithospheric discontinuity and the lithosphere-asthenosphere boundary, respectively. The shallowest conversion depths of the LAB are focussed to small-scale regions within the rift branches, namely the northern Albertine Rift, the Chyulu Hills and the Mozambique Belt, which are located around the Tanzania Craton. The larger thickness of the lithosphere beneath the cratonic terrain indicates that the Tanzania Craton is not significantly eroded. However, there are indications that the lithosphere beneath the craton and the rift branches is penetrated by ascending asthenospheric melts to depths of up to 140 and 60 km, respectively. The top of the ascending melts is associated with the occurrence of the mid-lithospheric discontinuity. The shallowest conversion depths of this boundary layer (60 – 90 km) are related to the rifted areas of the EARS and the Cenozoic volcanic provinces, which are located along the Albertine Rift, the Kenya Rift and the Rukwa-Malawi rift zones. The deepest conversion depths of up to 140 km are related to the Rwenzori Belt, the Ugandan Basement Complex and the interior of the Tanzania Craton.
Eisnukleierende Partikel (INP) sind ein wichtiger Bestandteil des atmosphärischen Aerosols. Trotz ihrer geringen Konzentrationen in der Atmosphäre haben sie Einfluss auf die Bildung von Eiskristallen und auf den Niederschlag. Durch Änderungen in Anzahlkonzentration oder anderer Eigenschaften der INP können sich Wolkenparameter wie Lebensdauer und Tröpfchendichte ändern, was weiter eine Ursache für Änderungen im globalen Strahlungshaushalt sein kann.
Der Anteil zum globalen Strahlungshaushalt durch „Wolken-Anpassungen aufgrund von Aerosolen“, stellt weiterhin die größte Unsicherheit des Strahlungsantriebes dar. Aus diesem Grund sind Messungen und Studien über atmosphärische Aerosole und INP notwendig. Im Rahmen dieser Arbeit wurde der Eiskeimzähler FINCH („fast ice nucleus chamber“) grundlegend überholt und für Messungen von INP optimiert. FINCH ist ein in-situ Eiskeimzähler der durch Mischung unterschiedlicher Luftströme eine Übersättigung der Probeluft mit Wasserdampf erzeugt, um auf diese Weise die zu untersuchenden Aerosolpartikel zu Eiskristallen wachsen zu lassen. Am Ende einer Wachstumskammer werden die Partikel durch eine Optik, dem FINCH-OPS, anhand von Streueigenschaften klassifiziert und ausgewertet. Um FINCH im erwarteten Umfang benutzen zu können, wurden am F-OPS der Laser und die zur Detektion des Streulichts benutzen Photomultiplier ersetzt. Weiter wurde die Software zur Detektion der Partikel neu entwickelt. Durch diese Änderungen ist es möglich Partikelanzahl, Partikelgröße sowie eine Information über die Form der Partikel abzuleiten. Über einen weiteren Photomultiplier im F-OPS ist es zudem möglich eine Information über Fluoreszenz des Partikels zu gewinnen, um so auf einen biologischen Ursprung des Partikels zu schließen. Vorangegangene Probleme durch elektromagnetische Einstrahlung und dadurch entstandene Inkonsistenzen während Messungen konnten im Rahmen dieser Arbeit identifiziert und ausgeschlossen werden. Ebenfalls konnten die zur Flusskühlung benutzen Wärmetaucher als Ursache für Verunreinigungen und Kontamination ausgemacht werden. Auch dieser, für Messungen ungeeignete Zustand, wurde im Rahmen dieser Arbeit behoben.
Ausführliche Charakterisierungsmessungen konnte die Funktionsfähigkeit des F-OPS, als einzelnes Messgerät ohne FINCH-Kammer, belegen. Durch Messungen mit einer steuerbaren Lichtquelle in der Optik konnte zudem die elektrische Verarbeitung sowie die Zählqualität der Optik verifiziert werden. Weiter kann durch diese Experimente gezeigt werden, dass mit dem F-OPS größenaufgelöst gemessen werden kann.
Auch in den ersten Streulichtexperimenten mit Testaerosol kann die Funktionsfähigkeit der Optik gezeigt werden. Für Partikelgröße von Dp > 400 nm wird eine Zähleffizienz von 25% eines TSI 3025 CPCs erreicht. Die über den F-OPS abgeleitete Partikelgröße kann durch Messungen mit monodispersen Aerosolpartikeln und einer parallelen Messung mit einem TSI 3330 OPS parametrisiert werden. Weiter kann die Fluoreszenz von ausgewählten Referenzstoffen gezeigt werden.
Im Betrieb von F-OPS hinter der FINCH-Kammer, also FINCH als Komplettsystem, wurden weitere Charakterisierungsmessungen durchgeführt. Es wurde festgestellt, dass die Anzahlkonzentration der Partikel nach Schließen eines Ventils exponentiell abfällt. Die Partikel folgen demnach nicht nur einem laminaren Fluss durch die Kammer. 50% der Partikel haben nach ca. 13 s die Kammer verlassen. Auch wurde ermittelt, dass ca. 40% der Partikel in der Kammer verloren gehen.
Erste Aktivierungsexperimente zeigen, dass Eispartikel in der Kammer auf eine Größe von Dp > 6 µm anwachsen. Durch Nullfiltermessungen in Aktivierungsphasen, sowie Ändern des zur Aktivierung notwendigen feuchten Flusses, wird zudem gezeigt, dass die Aktivierung der INP durch Mischung erfolgt und außerdem keine Fremdpartikel aktiviert werden. Die neue Steuerung der Kammer lässt es zu Temperaturen in etwa einer Stunde gezielt anzusteuern. Es wird gezeigt, dass Schwankungen in der Sättigung hauptsächlich durch Temperaturphänomene beeinflusst werden.
Abschließend wurden beispielhaft Laborexperimente mit Snomax© durchgeführt, welche sehr gut mit Werten aus der Literatur verglichen werden konnten. Auch eine erste Außenluftmessung am Jungfraujoch (Schweiz) wird in dieser Arbeit präsentiert. Die gemessenen INP-Konzentrationen im gezeigten Zeitraum liegen zwischen 1,4 ± 4,1 L-1 und 53 ± 30 L-1 und entsprechen somit wiederum bekannten Literaturwerten.