Refine
Year of publication
- 2011 (26) (remove)
Document Type
- Doctoral Thesis (26) (remove)
Has Fulltext
- yes (26) (remove)
Is part of the Bibliography
- no (26) (remove)
Keywords
- Chaostheorie (1)
- Dipol-Dipol-Wechselwirkung (1)
- Dissertation (1)
- Dünnschichttransistor (1)
- Feldeffekt (1)
- Feldeffekttransistor (1)
- Field-effect (1)
- Heavy Ion Physics (1)
- Heisenberg modell (1)
- Heisenberg-Modell (1)
Institute
- Physik (26) (remove)
This thesis deals with the simulation, optimization and realization of quasi-optical scanning systems for active THz cameras. Active THz cameras are sensitive in the THz regime of the electromagnetic spectrum and are suitable for the detection of metal objects such as weapons behind clothing or fabrics (maybe for security applications) or material investigation. An advantage of active THz-systems is the possibility to measure the phase of the THz-radiation and thus to reconstruct the surface topography of the objects under test. Due to the coherent illumination and the required system parameters (like image field size, working distance and lateral resolution) the optical systems (in the THz region often called quasi-optical systems) must be optimized. Specifically, the active illumination systems require highly optimized quasioptical systems to achieve a good image quality. Since currently no suitable multi-pixel detectors are available, the object has to be scanned in one or two dimensions in order to cover a full field of view. This further reinforces the occurring aberrations. The dissertation covers, alongside the underlying theory, the simulation, optimisation and realisation of three different active THz systems. The subdivision of the chapters is as follows: Chapter 1 deals with a motivation. Chapter 2 develops the underlying theory and it is demonstrated that the geometrical optics is an adequate and powerful description of the image field optimization. It also addresses the developed analytic on-axis and the off-axis image field optimization routine. Chapter 3, 4 and 5 are about the basis of various active THz cameras, each presented a major system aspect. Chapter 3 shows how active THz-cameras with very high system dynamics range can be realised. Within this chapter it could although be demonstrated how very high depth resolution can be achieved due to the coherent and active illumination and how high refresh rate can be implemented. Chapter 4 shows how absolute distance data of the objects under test can be obtained. Therefore it is possible to reconstruct the entire object topography up to a fraction of the wavelength. Chapter 5 shows how off-axis quasi-optical systems must be optimized. It is also shown how the illumination geometry of the active THz systems must be changed to allow for real-time frame rates. The developed widened multi-directional lighting approach also fixes the still existing problem of phase ambiguity of the single phase measurement. Within this chapter, the world’s first active real-time camera with very high frame rates around 10 Hz is presented. This could be only realized with the highly optimised quasioptical system and the multi-directional lighting approach. The paper concludes with a summary and an outlook for future work. Within the outlook some results regarding the simulation of synthetic aperture radar systems and metamaterials are shown.
Nanotechnology is a rapidly developing branch of science, which is focused on the study of phenomena at the nanometer scale, in particular related to the possibilities of matter manipulation. One of the main goals of nanotechnology is the development of controlled, reproducible, and industrially transposable nanostructured materials.
The conventional technique of thin-film growth by deposition of atoms, small atomic clusters and molecules on surfaces is the general method, which is often used in nanotechnology for production of new materials. Recent experiments show, that patterns with different morphology can be formed in the course of nanoparticles deposition process on a surface. In this context, predicting of the final architecture of the growing materials is a fundamental problem worth studying.
Another factor, which plays an important role in industrial applications of new materials, is the question of post-growth stability of deposited structures. The understanding of the post-growth relaxation processes would give a possibility to estimate the lifetime of the deposited material depending on the conditions at which the material was fabricated. Controllable post-growth manipulations with the architecture of deposited structures opens new path for engineering of nanostructured materials.
The task of this thesis is to advance understanding mechanisms of formation and post-growth evolution of nanostructured materials fabricated by atomic clusters deposition on a surface. In order to achieve this goal the following main problems were addressed:
1. The properties of isolated clusters can significantly differ from those of analogous clusters occurring on a solid surface. The difference is caused by the interaction between the cluster and the solid. Therefore, the understanding of structural and dynamical properties of an atomic cluster on a surface is a topic of intense interest from the scientific and technological point of view. In the thesis, stability, energy, and geometry of an atomic cluster on a solid surface were studied using a liquid drop approach which takes into account the cluster-solid interaction. Geometries of the deposited clusters are compared with those of isolated clusters and the differences are discussed.
2. The formation scenarios of patterns on a surface in the course of the process of cluster deposition depend strongly on the dynamics of deposited clusters. Therefore, an important step towards predicting pattern morphology is to study dynamics of a single cluster on a surface. The process of cluster diffusion on a surface was modeled with the use of classical molecular dynamics technique, and the diffusion coefficients for the silver nanoclusters were obtained from the analysis of trajectories of the clusters. The dependence of the diffusion coefficient on the system’s temperature and cluster-surface interaction was established. The results of the calculations are compared with the available experimental results for the diffusion coefficient of silver clusters on graphite surface.
3. The methods of classical molecular dynamics cannot be used for modeling the self-assembly processes of atomic clusters on a surface, because these processes occur on the minutes timescale, what would require an unachievable computer resource for the simulation. Based on the results of molecular dynamics simulations for a single cluster on a surface a Monte-Carlo based approach has been developed to describe the dynamics of the self-assembly of nanoparticles on a surface. This method accounts for the free particle diffusion on a surface, aggregation into islands and detachment from these islands. The developed method is allowed to study pattern formation of structures up to thousands nm, as well as the stability of these structures. Developed method was implemented in MBN Explorer computer package.
4. The process of the pattern formation on a surface was modeled for several different scenarios. Based on the analysis of results of simulations was suggested a criterion, which can be used to distinguish between different patterns formed on a surface, for example: between fractals or compact islands.This criteria can be used to predict the final morphology of a growing structure.
5. The post-growth evolution of patterns on a surface was also analyzed. In particular, attention in the thesis is payed to a systematical theoretical analysis of the post-growth processes occurring in nanofractals on a surface. The time evolution of fractal morphology in the course of the post-growth relaxation was analyzed, the results of these calculations were compared with experimental data available for the post-growth relaxation of silver cluster fractals on graphite substrate.
All the aforementioned problems are discussed in details in the thesis.
Within the present work, photodissociation reactions on 100Mo, 93Mo and 92Mo isotopes were studied by means of the Coulomb dissociation method at the LAND setup at GSI. Experimental data on these isotopes are important to explain the problem of the underproduction of the lighter p-nuclei - 92; 94Mo - within the models of the p-process nucleosynthesis. The reaction rates used in the nucleosynthesis calculations are usually obtained within the framework of the statistical model. In order to verify the model predictions and reduce the uncertainties, experimental measurements of the reaction cross sections are required. In particular, the data on (γ,n) reactions are of interest, since these reactions were shown to dominate the p-process flow in the molybdenum mass region.
As a result of the analysis of the present experiment, integrated Coulomb excitation cross sections of the 100Mo(γ,n), 100Mo(γ,2n), 93Mo(γ,n) and 92Mo(γ,n) reactions were determined. The measurement of the 93Mo isotope is particularly important, since this nucleus is unstable, and the corresponding cross section has not been measured before.
It should be emphasized that Coulomb dissociation is a unique tool to study photoninduced reactions on unstable nuclei, which is especially relevant in the context of nucleosynthesis network calculations. However, because of to the complexity of the data analysis procedure and a number of model assumptions that are required in order to extract the Coulomb excitation cross section from the data, one of the main aspects of this thesis was to verify the method by comparing the results with the previously published data obtained with real photon beams. Integrated cross sections of the 100Mo(γ,n) and 100Mo(γ,2n) reactions were directly compared to the data by Beil et al., obtained at Saclay with photons from positron annihilation, while an indirect comparison could be performed with a recent photoactivation measurement by Erhard and co-workers. A reasonable agreement was observed for the 1n channel: a scaling factor of 0.8 ± 0.1 between our result and Beil et al. data is consistent with the scaling factor of 0.89±0.09 reported by Erhard et al. between their data and Beil et al. data. Both results are in agreement with the scaling factor of 0.85 ± 0.03 recommended by Berman et al. for the data measured at Saclay on nuclei in the respective mass region. A somewhat lower factor of 0.61 ± 0.09 between the present data and Beil et al. data was obtained for the 2n channel. The discrepancy might be explained by both the substantial efficiency correction that has to be applied to the LAND data in the two-neutron case, as well as by an insufficiently accurate assumption that the Saclay neutron detector efficiency is energy- and multiplicity- independent.
A second important topic of the present thesis is the investigation of the efficiency of the CsI gamma detector. The calorimetric information that it delivers is essential to reconstruct the energy-differential cross section from the present measurement. The data taken with the gamma calibration sources shortly after the experiment were used for the investigation. In addition, a test experiment in refined conditions was conducted within the framework of this thesis. Numerous GEANT3 simulations of the detector were performed in order to understand various aspects of its performance. As a result, the efficiency of the detector was determined to be approximately a factor of 2 lower than the efficiency expected from the simulation. This result is consistent with several independent investigations, which were performed using different methods. At the same time, a remarkable agreement between the simulated and experimental data was achieved under assumption that the inefficiency of the detector is explained by the loss of data from a number of crystals, which are randomly chosen in each event according to their averaged performance ratio (the ”on-off” effect). The reasons for the observed malfunction are yet not fully clear. Regardless of the exact reason, in the present conditions a deconvolution of the measured data from the CsI response is not possible. Consequently, within the framework of this thesis, the results are presented in terms of integrated cross sections. A search for alternative methods of data interpretation, allowing to extract energy-differential information out of the available data, in currently ongoing.
In the more recent experiments at the LAND setup, where the Crystal Ball gamma detector was used as a calorimeter, the reconstruction of the energy-differential cross section with a reasonable resolution was already shown to be feasible. It means that, even considering the uncertainties of the present experiment of the order of 10%, the uncertainties of the statistical model predictions, which are on average estimated to be within a factor of 1.5-2, can already be constrained.
The analysis of the present experiment is still in progress. As a next step, Coulomb excitation cross section for 94Mo will be obtained. The 94Mo(γ,n) reaction cannot be studied by photoactivation, since the life time of the daughter nucleus is too long (4000 y). At the same time, this reaction plays a key role in the p-process nucleosynthesis.
The future of the LAND setup - the R3B setup1 at FAIR2 - will take advantage of a three orders of magnitude higher intensity of the radioactive beams [85], as well as of a completely new detector system. High-resolution measurements of the energy-differential cross sections will be possible for exotic nuclei, which were never accessible in the laboratory before. Such measurements will open great opportunities for nuclear astrophysics, allowing to obtain high-quality experimental data even for regions of the nuclear chart where the statistical model calculations are not applicable.
In the work presented herein the microscopic transport model BAMPS (Boltzmann Approach to Multi-Parton Scatterings) is applied to simulate the time evolution of the hot partonic medium that is created in Au+Au collisions at the Relativistic Heavy Ion Collider (RHIC) and in Pb+Pb collisions at the recently started Large Hadron Collider (LHC). The study is especially focused on the investigation of the nuclear modification factor R_{AA}, that quantifies the suppression of particle yields at large transverse momentum with respect to a scaled proton+proton reference, and the simultaneous description of the collective properties of the medium in terms of the elliptic flow v_{2} within a common framework.
Im Rahmen des Programms zur Intensitätserhöhung am Universal Linear Accelerator UNILAC für das Element Uran hat sich die Forderung nach einer Ionenquelle ergeben, die einen intensiven, hochbrillianten Ionenstrahl aus vierfach geladenen Uranionen bereitstellen kann. Ziel war es, im Zusammenspiel von Ionenquelle, Nachbeschleunigungssystem und Niederenergiestrahlführung einen Strahlstrom von mindestens 15 emA U4+ am Eingang des RFQ-Beschleunigers bereitzustellen. Die vorliegende Arbeit befaßt sich mit den Optimierungen und den experimentellen Untersuchungen an der Vakuumbogenionenquelle VARIS für den Uranbetrieb, welche schließlich ihre Leistungsfähigkeit an der Beschleunigeranlage der GSI erfolgreich unter Beweis gestellt hat. Der erste Teil dieser Arbeit widmet sich der Theorie der Vakuumbogenentladung unter besonderer Berücksichtigung der Erzeugung von U4+. Die Generierung von U4+ erfolgt dabei zu einem Teil im dichten Kathodenspotplasma, wo das Ionisationspotential von 31 auf 21 eV herabgesetzt ist, U4+ also bei vergleichsweise niedrigen Elektronenenergien erzeugt werden kann. Der U4+-Anteil beträgt jedoch nur 30 %. Die Erzeugung eines höheren Anteils an U4+ ist geknüpft an zusätzlich Ionisationsvorgänge im expandierenden Zwischenelektrodenplasma, für welches eine neuartige Theorie (MHD Ansatz) angegeben werden konnte. Für die Vakuumbogenentladung im axialen Magnetfeld konnte eine Erhöhung der Elektronentemperatur vorhersagt werden, die für eine höhere Ionisationsrate für U4+ verantwortlich ist. Für die Elektronentemperatur wurde bei einer magnetischen Flußdichte von 40 mT ein Wert von 10 eV vorhergesagt, welcher experimentell bestätigt werden konnte. Zieht man zudem die berechneten Wirkungsquerschnitte für die Ein- und Mehrfachionisation heran, so konnte aus den Wirkungsquerschnitten vorausgesagt werden, daß für die Produktion eines hohen Anteils an U4+ eine Elektronenenergie von zirka 50 eV für die Generierung von U4+ aus U3+ erforderlich ist. Im weiteren wurde ausgeführt, wie ein Extraktionssystem ausgelegt sein muß, welches den Forderungen nach einem Gesamtstrom von 140 mA entspricht oder diesen übertrifft. Das Erreichen dieses Stroms ist im Einlochextraktionssystem mit Schwierigkeiten verbunden (große Emissionsfläche, langes Extraktionssystem, Extraktionsspannung zirka 180 kV). Aus diesen Gründen ist die Entscheidung zugunsten eines Extraktionssystem mit 13 Öffnungen mit einem Durchmesser von jeweils 3 mm gefallen. Die Gesamtemissionsfläche aller Aperturen liegt bei 0,92 cm2. Zur Bestimmung der Strahlformierung einer Öffnung im Extraktionssystem ist das Strahlsimulationsprogramm KOBRA3INP unter Berücksichtigung einer experimentell gut zugänglichen Feldstärke von 11 kV/mm bei einem Aspektverhältnis von 0,5 genutzt worden. Es ergab sich ein minimaler Divergenzwinkel von etwa 55 mrad, die unnormierte effektive Emittanz geht mit steigender Stromdichte asymptotisch einem Wert von 65p mm mrad entgegen. Für das Extraktionssystem (13 Öffnungen) kann die unnormierte effektive Emittanz zu 610p mm mrad abgeschätzt werden. Die Stromdichte, welche der Plasmagenerator bereitstellen muß, beträgt etwa 1600 A/m2. Die Extraktionsspannung liegt bei 32 kV, welche, ebenso wie die Stromdichte, experimentell erreicht wurde. Bei den experimentellen Untersuchungen wurde zunächst untersucht, inwieweit die Impedanz des Vakuumbogenplasmas gesteigert werden kann. Ziel war es, eine möglichst hohe Plasmaimpedanz und damit eine hohe Bogenspannung zu erhalten, wodurch die erreichbare Elektronenenergie vergrößert wird (Regelung der Bogenspannung durch die Plasmaimpedanz). Es ist gezeigt worden, daß die Impedanz vor allem durch eine geeignete Magnetfeldkonfiguration erhöht werden kann (axiales Feld). Ebenso sind die Geometrie der Ionenquelle (Abstand Kathode-Anode 15 mm, Anodenöffnung 15 mm) und die verwendeten Materialien (Anode aus Edelstahl, kleiner Sputterkoeffizient und Sekundärelektronenaus97 löse) entscheidend, wobei zugunsten eines zuverlässigen Zündverhaltens der Ionenquelle die Entscheidung für eine Anodenöffnung von 15 mm statt 25 mm gefallen ist. So erreicht man für eine magnetische Flußdichte von 120 mT bei einem Bogenstrom von 700 A eine Bogenspannung von 54 V, wodurch die Erzeugung bis zu sechsfach geladenen Uranionen möglich wird. Um grundlegende Eigenschaften des Vakuumbogenplasmas zu bestimmen und das theoretische Modell zur Erzeugung von U4+ zu überprüfen, wurden die Ionen- und Elektronenenergieverteilung im Plasma gemessen ...
In dieser Arbeit wurden Verfahren zur Identifikation hirnelektrischer Aktivität mit Zellularen Nichtlinearen Netzwerken (CNN), im Besonderen Reaktions-Diffusions-Netzwerken, entwickelt und untersucht. Mit Hilfe der eingeführten Methoden wurden Langzeitaufzeichnungen hirnelektrischer Aktivität bei Epilepsie analysiert und mittels eines automatisierten Verfahrens ermittelt, inwieweit sich mögliche Voranfallszustände vom anfallsfreien Zustand im statistischen Sinne trennen lassen.
Zunächst wurde ein Überblick über CNN gegeben und deren Beschreibung durch Systeme gekoppelter Differentialgleichungen dargestellt. Weiterhin wurden die Möglichkeiten der Informationsverarbeitung mit CNN durch Ausnutzung von Gleichgewichtszuständen oder der vollständigen raum-zeitlichen Dynamik der Netzwerke diskutiert. Zusätzlich wurde die Klasse der Reaktions-Diffusions-Netzwerke (RD-CNN) eingeführt. Für die Repräsentation der hierbei benötigten weitgehend allgemeinen nichtlinearen Zellkopplungsvorschriften wurden polynomiale Gewichtsfunktionen vorgeschlagen. Mit einer Darstellung der Theorie der Lokalen Aktivität wurden notwendige Bedingungen für emergentes Verhalten in RD-CNN angegeben. Die statistische Bewertung von Vorhersagemodellen wurde aus theoretischer Sicht beleuchtet. Mit der Receiver Operating Characteristic (ROC) wurde eine Analysemethode zur Beurteilung der Vorhersagekraft des zeitlichen Verlaufs von Kenngrößen bezüglich bevorstehender epileptischer Anfälle vorgestellt.
Als nächstes wurden Überlegungen zur numerischen Simulation von CNN und deren flexible und erweiterbare programmtechnische Umsetzung entwickelt. Die daraus resultierende und im Rahmen dieser Arbeit entstandene objektorientierte Simulationsumgebung FORCE++ wurde konzeptionell und im Hinblick auf die Softwarearchitektur vorgestellt.
Die Verfahren zur numerischen Simulation wurden auf die Problemstellung der Systemidentifikation mit CNN angewandt. Dazu wurden Netzwerke derart bestimmt, dass deren Zellausgangswerte entsprechende Signalwerte des beobachteten, zu identifizierenden Systems approximieren.
Da die Parameter der zu bestimmenden CNN im vorliegenden Fall der Untersuchung hirnelektrischer Aktivität nicht bekannt sind und nicht direkt abgeleitet werden können, wurden überwachte Lernverfahren zur Bestimmung der Netzwerke eingesetzt. Hierbei wurden Lernverfahren verschiedener Klassen für die Identifikation mit CNN mit polynomialen Gewichtsfunktionen untersucht. Die Leistungsfähigkeit des vorgestellten Identifikationsverfahrens wurde anhand bekannter Systeme einer genauen Betrachtung unterzogen. Dabei wurde festgestellt, dass die betrachteten Systeme mit hoher Genauigkeit durch CNN repräsentiert werden konnten. Exemplarisch wurde das Parametergebiet lokaler Aktivität für ein RD-CNN berechnet und durch numerische Simulationen die Ausbildung von Mustern innerhalb des Netzwerkes nachgewiesen.
Nach einem einleitenden Überblick über die medizinischen Hintergründe von Epilepsie und der Erfassung hirnelektrischer Aktivität wurde eine vergleichende Übersicht über den Stand veröffentlichter Studien zur Vorhersage epileptischer Anfälle gegeben. Für die Anwendung des hier vorgestellten Identifikationsverfahrens zur Analyse hirnelektrischer Aktivität wurde zunächst die Genauigkeit der Approximation kurzer, als quasi-stationär betrachteter Abschnitte, von EEG-Signalen untersucht. Durch gezielte Erhöhung der Komplexität herangezogener Netzwerke konnte hier die Genauigkeit der Repräsentation von EEG-Signalverläufen deutlich verbessert werden. Dabei wurde zudem die Verallgemeinerungsfähigkeit der ermittelten Netzwerke untersucht, wobei festgestellt wurde, dass auch solche Signalwerte mit guter Genauigkeit approximiert werden, die nicht im Identifikationsverfahren durch die überwachte Parameteroptimierung berücksichtigt waren. Um speziell den Einfluss der Information aus der Korrelation benachbarter Elektrodensignale zu untersuchen, wurde ein Verfahren zur multivariaten Prädiktion mit Discrete Time CNN (DT-CNN) entwickelt.
Hierbei werden durch ein CNN Signalwerte der betrachteten Elektrode aus vergangenen, korrelierten Signalwerten von Nachbarelektroden geschätzt. Für diese Aufgabenstellung konnte eine Methode zur Bestimmung der Netzwerkparameter im optimalen Sinn, alleine aus den statistischen Eigenschaften der Elektrodensignale angegeben werden. Dadurch gelang eine erhebliche Reduzierung der Rechenkomplexität, die eine umfangreiche Untersuchung intrakranieller Langzeitableitungen ermöglichte.
Zur Analyse von Langzeitaufzeichnungen mit dem RD-CNN Identifikationsverfahren, wurden die numerischen Berechnungen zur Simulation von CNN mit FORCE++ auf einem durchsatz-orientierten Hochleistungs-Rechnernetzwerk durchgeführt. Mit den so gewonnen Ergebnissen konnten vergleichende Analysen vorgenommen werden. Zudem wurden Untersuchungen zum Vorliegen lokaler Aktivität in den ermittelten RD-CNN durchgeführt.
Die bei den beschriebenen Verfahren extrahierten Kenngrößen hirnelektrischer Aktivität wurden durch ein automatisiertes Verfahren auf ihre Vorhersagekraft für epileptische Anfälle bewertet. Dabei wurde untersucht, inwieweit der anfallsfreie Zustand und ein angenommener Voranfallszustand durch die jeweils betrachtete Kenngröße im statistischen Sinn diskriminiert werden kann. Durch parallele Analysen mit Anfallszeitsurrogaten wurden hierzu ergänzende Signifikanztests durchgeführt.
Nach Auswertung von mehrtägigen Hirnstromsignalen verschiedener Patienten konnte festgestellt werden, dass mit den in dieser Arbeit entwickelten Verfahren Kenngrößen hirnelektrischer Aktivität bestimmt werden konnten, welche offenbar die Identifikation potentieller Voranfallszustände ermöglichen.
Auch wenn für eine breite medizinische Anwendung die Spezifität und Sensitivität noch weiter verbessert werden muss, so können doch die erzielten Ergebnisse einen wesentlichen Schritt hin zu einer implantierbaren, CNN-basierten Plattform zur Erkennung und Verhinderung epileptischer Anfälle darstellen. Die Berechnungen für das Identifikationsverfahren mit RD-CNN könnten dabei durch zukünftige, spezialisierte schaltungstechnische Realisierungen für mehrschichtige CNN mit polynomialen Gewichtsfunktionen eine erhebliche Beschleunigung erfahren.
Das Antiprotonen-Experiment PANDA an der zukünftigen Beschleunigeranlage FAIR wird unter anderem Charmonium-Zustände mit einer bis dato unerreichten Genauigkeit messen können. Um dieses Ziel zu erreichen, wird eine sehr gute Teilchenidentifikationsfähigkeit verlangt. Eine gute Trennung zwischen Pionen und Kaonen wird durch den Einsatz eines Cherenkovdetektors erreicht. Die Leistungsfähigkeit eines DIRC hängt von dessen Radiatorgüte ab. Um die Qualität der Radiatorstäbe spezifizieren zu können, wurde im Rahmen dieser Doktorarbeit eine optische Messapparatur entwickelt. Dieser Aufbau erlaubt es die Transmission sowie die Oberflächenrauheit der Stäbe zu messen. Es wurden mehrere Radiatorstäbe aus synthetischem Quarzglas und Acrylglas untersucht. Die Messgenauigkeit bei hochqualitativen Stäben liegt für die Transmissionsmessung bei etwa 1 Promille und für die Rauheit bei 1-2 Angström. Die Messergebnisse bei verschiedenen Wellenlängen zeigen eine gute Übereinstimmung mit der skalaren Streutheorie, die den Zusammenhang zwischen Reflexionskoeffizienten und Rauheit beschreibt. Bei einer Strahlzeit an der GSI mit einem 2 GeV Protonenstrahl wurde ein erster Prototyp für den Barrel-DIRC mit einem Stab aus synthetischem Quarzglas als Radiator getestet. Durch Variation des Einfallswinkels und der Position des Protonenstrahls auf dem Radiator konnten Cherenkovringe eindeutig nachgewiesen werden. Zudem wurde der Cherenkovwinkel und die Einzelphotonauflösung in guter Übereinstimmung mit dem Erwartetem und der Simulation bestimmt.
The phenomenon of magnetism is a pure quantum effect and has been studied since the beginning of civilization. The practical use of magnetic materials for technical purposes was well established in the 19th century; still nowadays there is no lack of new high-tech applications based on magnetism for example in information technology to store and process data. This thesis does not focus on the development of new applications of magnetism in technology, nor enhancement of known fields of application. Instead, the intention is to use a quantum theory of magnetism for obtaining new insights on physical effects that accompany the phenomenon of magnetism. Therefore three different model systems, each of which are believed to describe a class of real compounds, are considered. Starting from the idea that magnetism can be understood by use of the so-called Heisenberg model that microscopically characterizes the interaction between localized magnetic moments, we restrict ourselves to the case where a long-range magnetic order is present. In order to deduce consequences resulting from this microscopic picture we use the spin-wave theory that is introduced in the first chapter. Central objects of this theory are the magnons which are elementary quantum excitations in ordered magnets. An application of these mathematical techniques to a model that describes an antiferromagnet in an external magnetic field is presented in the second chapter. Quantities like the spin-wave velocity and the damping of magnons are calculated using a Hermitian operator approach in the framework of spin-wave theory. A strong renormalization of the magnetic excitations arises because the symmetry of the system is reduced due to the external magnetic field. In the second model system, that describes thin films of a ferromagnet, concepts of classical physics meet quantum physics: The magnetic dipole-dipole interaction that is also known in everyday life from the magnetic forces between magnets and was initially formulated in the theory of electromagnetism, is included in the microscopic model. Having a special compound in mind where the magnetic excitations are directly accessible in experiments, the energy dispersions of magnon modes in thin-film ferromagnets are deduced. Our approach is essentially a basis for further investigations beyond this thesis to describe strong correlations and condensation of magnons. A recent realization of data processing devices with spin waves puts the understanding of physical processes in these ferromagnetic films in the focus of upcoming research. The third model system brings in the so-called frustration where the interactions between the spins are such that the total energy cannot be minimized by an appropriate alignment of the magnetic moments in the classical picture. In the simplest case this appears because the antiferromagnetically coupled spins are located on a triangular lattice. This situation will lead to strong quantum fluctuations which make this model system interesting. Finally the overall symmetry is reduced by inclusion of spin anisotropies and an external magnetic field. Instead of focusing on the properties of the magnetic excitations, the effect of the magnetic field on the properties of the lattice vibrations is subject to the investigation. This is interesting because the characteristics of lattice vibrations can be measured experimentally using the supersonic technique.
In der vorliegenden Arbeit wird die Ionisation von Stickstoff- und Sauerstoff-Molekülen in starken, nicht-resonanten Laserlicht-Pulsen untersucht. Die dreidimensionalen Impulsvektoren der freigesetzten Elektronen und Ionen wurden mittels eines sogenannten COLTRIMS Spektrometers vermessen. Das Hauptaugenmerk galt dem Kanal der Einfachionisation, der ein stabiles Molekülion ($N_2^+$ / $O_2^+$) erzeugt. Da in diesem Fall keine Dissoziation des Ions stattfindet, kann nicht aus der Flugrichtung ionischer Fragmente auf die Ausrichtung der Molekülachse geschlossen werden. Die Abhängigkeit des Prozesses vom Winkel zwischen der Molekülachse und der Polarisationsrichtung des ionisierenden Lichtes ist nur dann zugänglich, wenn die Ausrichtung der Molekülachsen vordem Zeitpunkt der Ionisation aktiv kontrolliert werden kann. Hierzu wurde die Technik der nichtadiabatischen Molekülausrichtung'' (non-adiabatic molecular alignment'') [1] angewandt. Ein erster, mäßig intensiver Lichtpuls bewirkte die Ausrichtung der Molekülachsen im Laborsystem. Sodann wurden die ausgerichteten Moleküle von einem zweiten, hochintensiven Puls ionisiert. In einem ersten Experiment wurden Elektronen-Impulsverteilungen für zwei verschiedene Molekülausrichtungen bestimmt. Ein Vergleich der Verteilungen brachte zwei wichtige Ergebnisse: 1) Im Bereich niedriger Elektronen-Impulse senkrecht zur Polarisationsrichtung des ionisierenden Lichtpulses wird der Fingerabdruck'' des ionisierten Molekülorbitals sichtbar. 2) Bei höheren Impulsen zeigten sich Strukturen, die als Doppelspalt-Interferenz interpretiert werden können. Ein ionisiertes Elektron propagiert im oszillierenden elektrischen Feld des Laser-Pulses. Von diesem kann es auf das Ion hin zurück beschleunigt werden und dort streuen [2]. Wir betrachten den Fall elastischer Rückstreuung''. In erster Näherung wirken die Bestandteile des diatomaren Molekülions wie ein Doppelspalt, an dem die streuende Elektronen-Welle gebeugt wird. In einem zweiten, dem ersten sehr ähnlichen Experiment wurde die Molekülausrichtungs-Richtung in kleinen Schritten variiert. Sowohl der Effekt der Elektronenbeugung am Ion, als auch - mit Einschränkungen - die Abbildung des ionisierten Orbitals wurde erneut beobachtet. Letztere ist durch eine Projektion des Orbitals in den Impulsraum senkrecht zur Laser-Polarisationsrichtung bestimmt [3,4]. Die Messung der Strukturen unter verschiedenen Molekül-Ausrichtungen im zweiten Experiment entspricht daher der Aufnahme verschiedener Projektionen des Orbitals. Der so gewonnene Datensatz sollte prinzipiell eine Rekonstruktion der dreidimensionalen Elektronen-Dichteverteilung des ionisierten Molekülorbitals mittels eines Tomographie-Algorithmus ermöglichen. Entsprechende Entwicklungen sind bei Kooperationspartnern im Gange. Die beobachtete Beugung des rückgestreuten Elektrons ermöglicht den Rückschluss auf die Positionen der Kerne im Molekülion. Es besteht die Hoffnung, dass sich in Zukunft detailliertere Informationen über das streuende Potential jenseits des einfachen Doppelspalt-Modells gewinnen lassen. Rückstreuung höherenergetischer Elektronen sollte hingegen eine verbesserte Ortsauflösung ermöglichen. Beide Informationen - Ionisiertes Orbital und Beugungsbild des Ions - werden simultan in ein- und derselben Messung gewonnen. Die zeitliche Auflösung wird durch rein optische Parameter (Licht-Wellenlänge, Pulslänge) determiniert. Sie kann mittels ultrakurzer, phasenstabiler Laserlicht-Pulse in den Bereich einer Femtosekunde oder darunter verbessert werden. [1] Stapelfeldt et al., Rev. Mod. Phys. 75, 543-557 (2003). doi:10.1103/RevModPhys.75.543 [2] Corkum, Phys. Rev. Lett. 71, 1994-1997 (1993). doi:10.1103/PhysRevLett.71.1994 [3] Spanner et al., J. Phys. B 37, L243-L250 (2004). doi:10.1088/0953-4075/37/12/L02 [4] Ivanov et al., J. Mod. Opt. 52, 165 (2005). doi:10.1080/0950034042000275360
Nonequilibrium phase transitions in chiral fluid dynamics including dissipation and fluctuation
(2011)
Chiral fluid dynamics combines the fluid dynamic expansion of a hot and dense plasma created in a heavy-ion collision with the explicit propagation of fluctuations at the chiral phase transition of quantum chromodynamics. From systems in equilibrium long-range fluctuations are expected at a conjectured critical point. Heavy-ion collisions are, however, finite in size and time and very dynamic. It is thus likely that nonequilibrium effects diminish the signal of a critical point. They can, however, stimulate phenomena at a first order phase transitions, like nucleation and spinodal decomposition. Both of phase transition scenarios are investigated in this work. Based on the linear sigma model with constituent quarks a consistent quantum field theoretical approach using the two-particle irreducible effective action is developed to derive both, the local equilibrium properties of the expanding quark fluid and the damping and noise terms in the Langevin equation of the order parameter of the phase transition, the sigma field. Within this formalism it is possible to obtain a conserved energy-momentum tensor of the coupled system. It describes the energy dissipation from the sigma field to the heat bath during relaxation. Within this model we investigate nonequilibrium phenomena in a scenario with a critical point and a first order phase transition. We observe long relaxation times at the phase transition, phase coexistence at the first order phase transition and critical slowing down at the critical point. We find a substantial supercooling in a first order phase transition in our model and due to the energy-momentum exchange also reheating is present. While at the critical point the correlation length increases slightly we find an enhanced intensity of nonequilibrium fluctuations at the first order phase transition, which leads to an increased production of sigma mesons.