Refine
Year of publication
- 2009 (3) (remove)
Document Type
- Doctoral Thesis (3) (remove)
Language
- English (3)
Has Fulltext
- yes (3)
Is part of the Bibliography
- no (3)
Keywords
Institute
- Biochemie und Chemie (2)
- Physik (1)
A solid-supported membrane (SSM) is an alkanethiol/lipid hybrid membrane with comparable lipid mobility, conductivity, and capacitance than a black lipid membrane (BLM). However, mechanical perturbations, which usually destroy a BLM, do not influence the life-time of a SSM, which is mechanically so stable that solutions may be rapidly exchanged at its surface. This key property has been utilized in this thesis to characterize electrophysiologically two bacterial secondary active transporters (MelB and LacY) as well as to investigate the specific interactions between ions and lipid membranes. These three different projects are summarized below: (1) The properties of lipid membranes, which represent the most important biological interface between intracellular and extracellular compartments, are essentially modulated by the ionic composition of the surrounding aqueous medium. To investigate specific interactions between ions and lipid membranes, solutions of different ionic composition were exchanged at the surface of a SSM through a flow system. This solution exchange resulted in charge translocations that were interpreted in terms of binding of the ions to the lipid headgroups at the SSM surface. We found that chaotropic anions and kosmotropic cations are attracted to the membrane independent of the membrane composition. In particular, the same behaviour was found for lipid headgroups bearing no charge like monoolein. This general trend is modulated by the electrostatic interaction of the ions with the lipid headgroup charge. Our experimental results are in agreement with recent molecular dynamic simulations of PC membranes. (2) Rapid solution exchange on a solid-supported membrane (SSM) is investigated using fluidic structures and a solid-supported membrane in a wall jet geometry. The flow was analyzed with a new technique based on specific ion interactions with the surface combined with an electrical measurement. The critical parameters affecting the time course of the solution exchange and the transfer function describing the time resolution of the SSM system were determined. The experimental data indicate that the solution transport follows a plug flow geometry while the rise of the surface concentration can be approximated by Hagen Poiseuille flow with ideal mixing at the surface of the SSM. Using an improved cuvette design a solution exchange as fast as 2 ms was achieved at the surface of a solid supported membrane. As an application of the technique the rate constant of a fast electrogenic reaction in the melibiose permease MelB, a bacterial (Escherichia coli) sugar transporter, is determined. For comparison, the kinetics of a conformational transition of the same transporter was measured using stopped-flow tryptophan fluorescence spectroscopy. The relaxation time constant obtained for the charge displacement agrees with that determined in the stopped-flow experiments. This supports the previous proposition that upon sugar binding MelB undergoes an electrogenic conformational transition with a rate constant of k ~ 250 s-1. (3) Electrogenic events due to activity of wild-type lactose permease from Escherichia coli (LacY) were investigated with proteoliposomes containing purified LacY adsorbed on a solid-supported membrane electrode. Downhill sugar/H+ symport into the proteoliposomes generates transient currents. Studies at different lipid to protein ratios and at different pH values, as well as inactivation by N-ethylmaleimide, show that the currents are due specifically to the activity of LacY. From analysis of the currents under different conditions and comparison with biochemical data, it is apparent that the predominant electrogenic event in downhill sugar/H+ symport is H+ release. In contrast, LacY mutants E325A and C154G, which bind ligand normally but are severely defective with respect to lactose/H+ symport, exhibit a minor electrogenic event upon addition of LacY-specific substrates, representing only 6% of the total charge displacement of the wild-type. This activity is due either to substrate binding per se or to a conformational transition following substrate binding. We propose that turnover of LacY involves at least two electrogenic reactions: (i) a minor reaction that occurs upon sugar binding and is due to a conformational transition in LacY; and (ii) a major reaction due to cytoplasmic release of H+ during downhill sugar/H+ symport, which is the limiting step for this mode of transport.
Zusammenfassung Die Alzheimersche Krankheit (AD) ist mit 60% die am häufigsten auftretende Art der Demenz. Weltweit sind ca. 24 Mio. Menschen von der neurodegenerativen Krankheit betroffen, welche sich durch den Verlust der kognitiven Fähigkeiten auszeichnet. Es gibt zwei Ausprägungen der Demenz, zum einen die sporadische Verlaufsform, die bei Menschen in einem Alter ab 65 Jahren auftritt und zum anderen die familiäre Alzheimersche Krankheit (FAD), die schon weitaus jüngere Menschen betrifft und auf genetische Mutationen zurück zu führen ist. Beide Formen der Demenz zeigen den gleichen neuropathologische Phänotyp, der zur Ausbildung von extrazellulären Plaques und intrazellulären Neurofibrillen führt. Durch die Entstehung der Plaques und der Neurofibrillen werden die Verbindungen zwischen den einzelnen Neuronen verringert und die Neuronen sterben ab. Für das Auftreten der FAD sind Mutationen in den Genen des Amyloid Vorläufer Proteins (APP, Substrat) sowie der Aspartatprotease Einheit des γ-Sekretase Komplexes, Presenilin 1 (PS1) oder Presenilin 2 (PS2), verantwortlich. Die γ-Sekretase ist ein membranständiger Komplex bestehend aus den vier Untereinheiten PS1 oder PS2, Nicastrin (Nct), Aph-1 und Pen-2. Um ausreichende Informationen über den γ-Sekretase Komplex bezüglich seiner Interaktionsflächen, seines Katalysemechanismus und seiner Substraterkennung zu erhalten, wäre es hilfreich seine 3 Dimensionale Struktur aufzuklären, wozu große Mengen der sauberen und homogenen Proteine benötigt werden. Die Herstellung von ausreichenden Proteinmengen stellt derzeit aber einen Engpass für die strukturelle und funktionelle Charakterisierung des γ-Sekretase Komplexes in-vitro dar. Alzheimer’s disease (AD) is the most common cause of dementia, which affects 24 million people worldwide. It is a neurodegenerative disorder, which occurs either in its most common form in people over 65 years or in the rare early-onset familial AD (FAD). Responsible for the autosomal dominant FAD are mutations in the genes encoding for the β-amyloid precursor protein (APP) and the two homologues integral membrane proteins Presenilin 1 (PS1) and Presenilin 2 (PS2). The two PSs are major but alternative components of the intramembrane aspartyl protease γ-secretase. Further components are the membrane proteins Nicastrin (Nct), Aph-1 and Pen-2. Production of sufficient amounts of protein samples is still the major bottleneck for the detailed functional and structural in-vitro characterization of the γ-secretase complex. Due to toxicity, stability and targeting problems, the overproduction of MPs in conventional in-vivo systems often has only limited success. Therefore, efficient expression protocols using the cell-free (CF) system were established in this work. After optimization, I was able to produce up to milligram amounts of the single proteins PS1 and PS2, the cleavage products PS1-NTF and PS1-CTF, and Pen-2. The in-vitro produced γ-secretase subunits were further characterized, concerning their purity, secondary fold, thermal stability and homogeneity. Highest purities with over 90% after affinity chromatography could be achieved for PS1-CTF and Pen-2. Reconstitution of PS1, PS1-NTF, PS1-CTF and Pen-2 into E. coli liposomes results in a homogeneously distribution, which gives evidence for a structural folding. This was confirmed by CD spectroscopy of PS1-CTF and Pen-2. The thermal stability of Pen-2 shows a transition at 68°C, whereas PS1-CTF is stable up to 95°C. Both proteins show in addition homogeneous elution profiles investigated by analytical SEC and exhibit a monomeric (Pen-2) or dimeric (PS1-CTF) character analyzed by blue native PAGE. Different methods were performed to get evidence about the assembly of the complex, like pull-down experiments, immunoprecipitation, co-expression of radioactive labeled subunits and titration assays by liquid-state NMR. First hints for an interaction of the CF synthesized proteins could be observed by co-expression. Supplemental, Pen-2 and CTF could be purified in sufficient amounts and to apparent homogeneity that allow structural approaches by X-ray crystallography and liquid-state NMR spectroscopy. First conditions for protein crystals were achieved for Pen-2 and structural investigations of PS1-CTF by liquid-state NMR could be performed after optimization of the expression-, purification- and detergent conditions.
This study addresses the structure-function relationships of three essential membrane proteins: Porin from Paracoccus denitrificans, Porin OmpG from Eschericia coli and BetP from Corynobacterium glutamicum using Fourier transform infrared (FT-IR) spectroscopy and Attenuated Total Reflection (ATR) techniques. The structure of porin from P. denitrificans is known for more than a decade; however, the mechanism for loss of functionality together with the monomerization was not clear. In this study we have addressed the role of lipids for the functionality of porin using FT-IR. OmpF porin was found to interact with the lipid molecules via the aromatic girdles surrounding the protein for functionality. In this study, molecular bonds and groups of the lipids were established as reporter groups probing at different depths of the bilayer in order to understand the interaction partner of the aromatic girdles of porins. Monomerization of the trimeric assembly of OmpF porin reconstituted in lipids is induced by increasing the temperature. Porin (OmpF) was found to be extremely stable: The secondary structure of the protein was unaltered up to the temperature-induced main transition, around 80-90 °C, above which it is denatured. However, the interaction of the aromatic girdle with the lipid molecules exhibited distinct changes at much lower temperature values (40 - 50°) where, according to the previous functional studies, monomerization and the loss of function occurs. The results are compared with OmpG porin from E.coli, for which the functional unit is a monomer. The aromatic girdle-lipid interaction was monitored by the tyrosine aromatic ring C=C vibrational mode, a universal marker for the protein stability and interaction. We have also found that the aromatic girdles of porins are interacting with the interfacial region of the lipid bilayer instead of lipid headgroups. Lipid-protein interaction was found to be not only essential for the structural stability, but also for the functionality of OmpF porin. We have also studied the structural properties of OmpG from E.coli. The structure of OmpG at two pH values has been resolved using X-ray crystallography and the channel has been proposed to attain different states at different pH values as closed (pH < 5.5) and open (pH >7.5). This study, using IR spectroscopy, revealed that the pH-induced opening and closing of the channel is reflected by the frequency shifts of the ? sheet structure. OmpG has more rigid ? barrel properties upon opening of the channel. IR spectral analysis revealed multiple ? sheet signals with different hydrogen bond strengths. This enabled us to monitor the formation of hydrogen bridges between the extracellular loops upon opening of the channel. The conclusion that OmpG porin having two states at different pH values was also confirmed by the three mutants where the role of the histidine pair (H231 & H261) and loop 6 has been addressed. Temperature-profiling of the wild type (WT) protein and the mutants did not show pH dependent structural stability differences in detergent solution. However, the WT protein was found to be more stable in the open form in 2D crystals than the closed form. Reconstitution into lipids has increased the transition temperature value by ~20 °C in the closed state and ~25 °C in the open state. Therefore we conclude that the open and closed state of OmpG has structural stability differences that are only revealed in the lipid environment. A comparison of the transition temperature values of OmpG WT and the mutants suggested that the hydrogen bond network among S218-H231-H261-D267, together with the formation of 12 residue-long ?-sheet contributes to the structural stability of the open channel. In the process of closing and opening of the channel, the globular structure of the protein remains mainly unchanged, while there are changes in the side chain moieties. In addition to the role of the histidine pair and the loop L6, in situ opening/closing experiments showed that the negatively charged amino acids, i.e. Asp and Glu, and Arg residues also play an active role; possibly by interacting with each other inside the pore lumen. Therefore it could be concluded that the closure of the channel at acidic pH values is not only via closing the channel entrance by loop 6, but also via changing the electric potential inside the lumen due to the different states of charged amino acids in order to effectively block the gateway. BetP from C.glutamicum attains an active and inactive state in order to adjust its glycine betaine uptake rate to the osmotic conditions that the cell encounters. The structure of BetP is not yet available. The WT protein exhibited structural differences in the presence of excess K+, which is one of the activation conditions. In 2D crystals, increasing the ionic strength to 700 mM K+ was shown to induce changes in the ?-helical moiety with contributions from the ester groups and one Tyr residue using ATR-FTIR. An increase in ionic strength to 220 mM K+ was found to be the threshold value of potassium concentration ([K+]) where the protein exhibits structural alterations in detergent solution. The determined [K+] values are in good agreement with the previous functional studies. However, there are differences in the activation profile of BetP in 2D crystals and in detergent solution, which points out that the lipids are involved in the conformational transition from the inactive to the active state and their absence can lead to different structural properties. BetP WT was found to have ~65% alpha-helix, ~25% random coil and ~10% turn structure in detergent solution. In the presence of excess K+, the WT protein is found to adapt more unordered structure. Secondary structure analysis of the mutants revealed that both the N- and C-terminus are in ?-helical conformation. Reconstitution of WT protein in 2D crystals increased the main transition (denaturation) temperature value from ~62 °C to ~85 °C, a clear indication that the protein is more stable in lipid environment. Temperature-profiling of the two forms of the WT protein revealed that the structural breakdown is preceeded by monomerization of the trimeric assembly. Comparing the two forms of the WT protein and the mutant BetA, we conclude that the oligomeric status is stabilized via the interactions among hydrophilic regions involving the N terminus. H/D exchange and activation with excess K+ in D2O-buffer revealed that activation of the protein involves the interaction of Arg and Asp/Glu residues in the cytoplasmic region of the protein. BetP WT and the two mutants tested, i.e. BetA and BetP?C45, showed differences in protein packing upon activation. The WT protein and BetP?C45 mutant also show changes in the hydrogen bonding properties of turns. Since BetA does not show such a property in activation, we conclude that the N-terminus interacts with the loops in the inactive state via the interaction of charged amino acids for the WT protein and that this interaction is altered during the activation. It could be argued that the protein packing is affected via the changes in turns upon activation. We also have found experimental evidence that one Tyr residue has different orientations in the active and inactive state of BetP. Based on the previous functional studies, it could be one of the five Tyr residues in the cytoplasmic region of the protein (in loop 3, 6, 7 or C-terminus). The mutant BetP?C45, on the other hand, showed fewer differences between the active and inactive state conditions and based on the H/D exchange rates, the mutant shows the properties of an active WT protein, proving that the C-terminal truncation impairs the conformational transition between the active and inactive states.