Refine
Year of publication
- 2016 (11) (remove)
Document Type
- Doctoral Thesis (11) (remove)
Language
- English (11) (remove)
Has Fulltext
- yes (11)
Is part of the Bibliography
- no (11)
Keywords
- Gas Chromatography (1)
- Halocarbons (1)
- Halogenated Trace Gases (1)
- Material Flow Analysis (1)
- Moesia Superior (1)
- Namibia (1)
- Pb-Ag (1)
- Rainwater Harvesting (1)
- Roman (1)
- Sustainability Evaluation (1)
Institute
- Geowissenschaften (11) (remove)
In Belize, which is well known for the Belize Barrier Reef and its offshore atolls, coastal lagoons are frequent morphological features along the coast. They represent transitional environments between siliciclastic and carbonate settings. In order to shed light into the Holocene evolution of coastal lagoon environments, five localities along the central coast of Belize were selected as coring sites. These include four coastal lagoons and one marsh area, namely Mantatee Lagoon, Mullins River Beach, Colson Point Lagoon, Commerce Bight Lagoon and Sapodilla Lagoon. A total of 26 sediment cores with core lengths ranging from 109 cm to 500 cm, were drilled using a Lanesky-vibracorer. Overall, 73 m of Holocene sediments and Pleistocene soil were recovered. Together with 58 radiocarbon dates the sediments reveal details on the sediment architecture and depositional features of the localities.
Marine inundation of the mainland and coastal lagoon formation started around 6 kyrs cal BP.
As a response to sea-level rise during the Holocene transgression, facies retrograded towards the coast, as seen in marginal marine overlying brackish mollusk faunas. Evidence for late Holocene progradation of facies due to sea-level stagnation is largely lacking. The occurrence of landward thinning sand beds, hiatuses and marine fauna in lagoonal successions are indications of event (overwash) sedimentation. Sediments recovered are largely of Holocene age (<7980 cal BP), overlying Pleistocene sections. Analyses of sediment composition and texture, radiocarbon dating and mollusk shell identification were used to describe and correlate sedimentary facies.
XRD analyses have identified quartz as the dominant mineral, with the Maya Mountains as main source of coastal lagoon sediments. The most common sedimentary facies include peat and peaty sediment, mud, sand, and poorly sorted sediments. Pleistocene soil forms the basement of Holocene sediments. Holocene mud represents lagoon background permanent sedimentation.
Peats and peat-rich sequences were deposited in mangrove swamp environments, whereas sandy facies mainly occur in the shoreface, beach, barriers, bars, barrier spits and overwash deposits. Facies successions could be identified for each locality, but it has proven difficult to correlate the stratigraphic sequences, especially among localities. These differences among the five locations studied suggest that apart from regional influence such as sea-level rise, local environmental factors such as small-scale variation in geomorphology and resulting facies heterogeneity, connectivity of the lagoon with the sea, antecedent topography and river discharge, were responsible for coastal sedimentation and lagoon development in the Holocene of Belize.
Faunal composition and distribution patterns of mollusk assemblages from 20 shell concentrations in cores collected in coastal lagoons, a mangrove-fringed tidal inlet and the marginal marine area (shallow subtidal) show considerable variation due to environmental heterogeneity and the interplay of several environmental factors in the course of the mid-late Holocene (ca. 6000 cal BP to modern). The investigated fauna ≥2 mm comprises 2246 bivalve, gastropod and 11 scaphopod specimens. Fifty-three mollusk species, belonging to 42 families, were identified. The bivalve Anomalocardia cuneimeris and cerithid gastropods are the dominant species and account for 78% of the total fauna. Diversity indices are low in concentrations from lagoons and relatively high in the marginal marine and tidal inlet areas.
Based on cluster analysis and nonmetric multidimensional scaling (NMDS), seven lagoonal assemblages and three marginal marine/tidal inlet assemblages were defined. A separation between lagoonal and marginal marine/tidal inlet assemblages seen in ordination indicates a lagoon-onshore gradient. The statistical separation among lagoonal assemblages demonstrates environmental changes during the Holocene evolution of the coastal lagoons, which is probably related to the formation of barriers and spits. The controlling factors of species distribution patterns are difficult to figure out, probably due to the heterogeneity of the barrier-lagoon systems and the interaction of paleoecological and paleoenvironmental factors. In addition to the taxonomic analysis, a taphonomic analysis of 1827 valves of A. cuneimeris from coastal lagoons was carried out. There is no relationship between depth and age of shells and their taphonomic condition. Size-frequency distributions and right-left valve ratios of A. cuneimeris suggest that valves were not transported over long distances but were deposited parautochthonously in their original habitat. Shells from tidal inlet and marginal marine environments were also predominantly deposited in their original habitats.
Since the Belize coast was repeatedly affected by hurricanes and the paleohurricane record for this region is poor, the sediment cores have been examined in order to identify storm deposits.
The paleohurricane record presented in this study spans the past 8000 years and exhibits three periods with increased evidences of hurricane strikes occurring at 6000-4900 cal yr BP, 4200-3600 cal yr BP and 2200-1500 cal yr BP. Two earlier events around 7100 and 7900 cal yr BP and more recent events around 180 cal yr BP and during modern times have been detected. Sand layers, redeposited corals and lagoon shell concentrations have been used as proxies for storm deposition. Additionally, hiatuses and reversed ages may indicate storm influence. While sand layers and corals represent overwash deposits, the lagoon shell concentrations, which mainly comprise the bivalve Anomalocardia cuneimeris and cerithid gastropods, have been deposited due to changes in lagoon salinity during and after storm landfalls. Comparison with other studies reveals similarities with one record from Belize, but hardly any matches with other published records. The potential for paleotempestology reconstructions of the barrier-lagoon complexes along the central Belize coast differs depending on geomorphology, and deposition of washovers in the lagoon basins is limited, probably due to the interplay of biological, geological and geomorphological processes.
Many natural minerals exist in the form of a solid solution. The systematic changes in structural and physical properties of oxide solid solutions are of geological importance and allow for wide applications. In order to understand the composition-structureproperty relations, substitutional solid solutions of CuxZn2−xTiO4, ZnxMg1−xTi2O5 and CuxMg1−xTi2O5 have been synthesised by mechanochemical activation assisted solid state synthesis. Self-propagating high-temperature synthesis has been employed to achieve the interstitial solid solutions of Ti5Si3Zx (Z refers to the element boron or oxygen).
The changes in the crystal structure and physical properties due to the formation of solid solutions are investigated by employing X-ray diffraction, neutron diffraction, Raman spectroscopy, low-temperature heat capacity, thermal expansion, scanning electron microscopy, UV-vis spectroscopy, plane-wave ultrasound spectroscopy and density functional theory calculations.
Melt segregation inside the earth consists of two different processes: 1) Generation of partially molten rock and 2) separation of melt, produced from partially molten rock, from the solid residual matrix. This thesis focuses on the later process. The 2 phase flow dynamics combines the study of flow dynamics of melt and matrix. Several studies have given the background theoretical frameworks for the flow dynamics of melt inside the earth. [McKenzie, 1984] summarizes the studies of [Ahern and Turcotte, 1979; Frank, 1968; Sleep, 1975] and gives a complete set of governing equations for the 2-phase flow problem.
[Bercovici et al., 2001] gives a general formulation considering the univariate system of equations related to matrix and melt flow which includes the interfacial surface force. The assumption of melt having negligible viscosity compare to the matrix has been abandoned. Therefore, based on these formulations, we have constructed our numerical model and thereafter a fortran code PERCOL2D to get an insight of melt percolation process through porous media. Additionally, we have used the Helmhotz decomposition, which splits a smooth and rapidly decaying vector field into an irrotational vector field and an incompressible vector field [Srámek, 2007], for matrix and fluid viscosity in order to lower the number of linearly independent variables to minimize the computational complications. The melt residing at inter-granular areas of lithosphere, forms an interconnected network even at low porosity. Therefore, being less dense than the matrix, melt moves up through porous media due to its buoyancy. Compaction of matrix, which occurs to compensate the melt separation, is considered in this thesis, where the effective bulk and shear viscosity of matrix are function of melt fraction. We have effective bulk viscosity of matrix as inversely proportional to melt fraction. Porosity dependence of effective bulk and shear viscosity leads to stronger melt focusing in highly porous region like mid ocean ridges [Katz, 2008] since the ratio of bulk and shear viscosity is smaller (< 10) than the constant viscosity case for the porous waves having non dimensional amplitude 5% or higher. Moreover, it is observed in [Richard et al., 2012] that the solitary wave formed in porosity dependent viscous matrix settings are steeper than the one formed in the constant matrix viscosity setting.
Firstly some 1D numerical experiments with PERCOL2D have been carried out using fixed and periodic boundary conditions for zero source term (i.e. no melting or no freezing) and negligible surface tension.
3 series of model setups with different initial conditions have been carried out varying the width, non-dimensional amplitude and the background porosity value of the initial input of porous wave.
A mathematical derivation for 1D solitary wave solution for the two phase flow through porosity dependent compacting media, is obtained in this thesis which is different than the study of [Barcilon and Lovera, 1989; Barcilon and Richter, 1986; Scott and Stevenson, 1984; Spiegelman, 1993a,b] as the effective viscosity of matrix is constant there.
Although [Simpson and Spiegelman, 2011] gives the solitary wave solutions in 1D, 2D and 3D considering the porosity dependent effective viscosity of the matrix, but using the small background porosity approximation, they neglect the background porosity (i.e φ0) and therefore the effect of variation of compaction lengths, which causes variation in the shape and dynamics of the solitary wave. Therefore, the study [This thesis, Richard et al., 2012] can be used for more general purpose. Solitary waves in varying viscous medium, are steeper (cf fig.5.1) compared to the one in constant viscous medium and their speed decreases as an inverse function of the background porosity. Additionally, this analytical solution is used in our code PERCOL2D and also in FDCON for numerical benchmarking (1D) of PERCOL2D.
The role of melt grain contiguity is considered in the revised viscosity formulation [Schmeling et al., 2012] based on elastic moduli theory of a fluid filled poro-elastic medium. This formulation is used in this thesis to produce a comparative dispersion relationship between speed of the wave and the non dimensional amplitude of porous wave, based on both the viscosity formulations (fig. 6.20) where one can see that the model based on [Bercovici et al., 2001] formulation, converges to the same dispersion relationship obtained from [Simpson and Spiegelman, 2011]. Whereas, the dispersion relationship using [Schmeling et al., 2012] formulations, shows time-dependent decrease of phase velocity with increasing amplitude and it is not yet clear that whether these solutions converge to steady state porosity waves before the porosity becomes 1.
Development of the flash-heating method for measuring melting temperatures in the diamond anvil cell
(2016)
A new ‘laser flash-heating’ method has been developed for measuring melting temperatures above 2000 K in a diamond anvil cell at gigapascals of pressure. It overcomes the general difficulties in detecting an onset of melting in a diamond anvil cell. It also circumvents the notorious experimental difficulties associated with the long heating durations of the CW laser-heating and the short timescales in the pulsed laser-heating and shock-compression experiments.
In this method, the duration of heating a sample is tuned to avoid chemical reactions of the sample with the diamond anvils and the surrounding pressure medium, while maintaining the accuracy of the temperature measurements. The absence of chemical reactions is confirmed by the EDS technique. Melt detection is now unambiguous from the analysis of textures on the surface and in depth of the recovered samples using the SEM and FIBM techniques, respectively. Using this method, the following has been achieved.
1. The melting curve of hcp-Re has been measured to 48 GPa, 4200 K for the first time. It has a significantly steeper slope than those observed for other transition metals like W and Mo with bcc structures. Above 20 GPa, Re becomes the most refractory metal surpassing W.
2. The melting curve of bcc-Mo has been measured to 45 GPa, 3100 K. It agrees with previous melt-slopes approaching zero value with pressure as reported in the LHDAC experiments using ADXRD and visual observation techniques for inferring the onset of melting. Flash-heating experiments at pressures higher than 50 GPa are required to further corroborate the flat melt-slope and resolve the long standing controversy about melting of Mo.
3. The melting curve of bcc-Ta has been measured to 85 GPa, 4300 K. Unlike in previous experiments using ADXRD and visual observation as probes, it has been tightly bracketed with an unambiguous detection of the onset of melting, without any chemical reaction. The present melting curve cannot be reconciled with shock measurements and theoretical predictions, and the precision of measurements calls for a reevaluation of theoretical, shock compression, and other DAC approaches to determine melting at high pressures. A further analysis with TEM technique for investigating the structure of the heated portion below and above melting temperatures of Ta may benefit in resolving various phase transitions predicted to explain the vast discrepancies in the reported melt-slopes.
When extrapolated to one atmosphere pressure, all the measured flashmelting curves agree with the known melting points.
This thesis addresses the reconstruction of the topographic evolution and the climate dynamics of the Early Cenozoic North American Cordillera through integrated geochronology, sedimentology, stable isotope, and clumped isotope thermometry studies. It encompasses the scientific disciplines of geochemistry, tectonics, and Earth surface processes.
Ziel der Arbeit war es, die Flugzeitmassenspektrometrie als neue Analysemethode für die instrumentelle Analytik halogenierter Spurengase in der Luft zu etablieren. Die grundle-gende Motivation dafür ist, dass anthropogene Emissionen vieler Vertreter dieser Sub-stanzklasse einen negativen Einfluss auf die Umwelt zeigen: in der Atmosphäre agieren die Substanzen bzw. ihre Abbauprodukte als Katalysatoren für den stratosphärischen Ozonab-bau und verstärken den Strahlungsantrieb der Erde durch Absorption elektromagnetischer Strahlung im sogenannten atmosphärischen Fenster. Um diese Effekte und deren Auswir-kung quantifizieren zu können, ist es notwendig, Konzentrationen und Trends der Substan-zen in der Atmosphäre zu überwachen. Nur so können Gegenmaßnahmen wie Produktions-reglementierungen geplant und bewertet werden. In Kombination mit inverser Modellie-rung können zudem Rückschlüsse über tatsächlich emittierten Mengen gezogen werden. Dies stellt den Anspruch an die Analytik, sehr geringe Mengen dieser Gase sehr präzise quantifizieren zu können, um auch schwache Trends zu erkennen. Zudem muss die Analy-semethode die Möglichkeit zu bieten, mit der wachsenden Anzahl bekannter und zu über-wachender Substanzen Schritt zu halten. Besonders für letzteren Aspekt bietet die Flug-zeitmassenspektrometrie einen entscheidenden Vorteil gegenüber der „konventionellen“ Methode, der Quadrupolmassenspektrometrie: sie zeichnet das gesamten Massenspektrum auf ohne dadurch an Empfindlichkeit einzubüßen. Um das atmosphärische Mischungsver-hältnis von Substanzen im Bereich von pmol mol−1 bis fmol mol−1 bestimmen zu können, muss das Quadrupolmassenspektrometer im Single Ion Monitoring Modus betrieben wer-den – so wird zwar eine hohe Sensitivität erreicht, es wird aber auch nur die Intensität eines bestimmten Masse zu Ladungsverhältnisses (kurz: Masse) zu einem Zeitpunkt aufgezeich-net. Ein Flugzeitmassenspektrometer hingegen extrahiert Ionen mit einer Frequenz im Ki-loherzbereich und zeichnet für jede Extraktion das vollständige Flugzeitspektrum und da-mit Massenspektrum auf.
Aufgabe dieser Arbeit war es, ein Flugzeitmassenspektrometer mit vorgeschalteter Pro-benanreicherungseinheit sowie Gaschromatograph zur Trennung des Subtanzgemisches vor der Detektion aufzubauen und Werkzeuge zur Datenauswertung zu entwickeln. Um einen zukünftigen Feldeinsatz vorzubereiten, sollte der Aufbau möglichst kompakt, mobil und vollständig automatisiert sein. Anschließend sollte Empfindlichkeit, Präzision und dynami-scher Messbereich geprüft, optimiert und die Anwendbarkeit zur Analyse halogenierter Spurengase gezeigt werden. Die Ergebnisse aus der in der vorliegenden Arbeit präsentier-ten Geräteentwicklung finden sich in drei Publikationen wieder, welche in thematischer Reihenfolge die Probenanreicherung (Obersteiner et al., 2016b), den Vergleich von Quadrupol- und Flugzeitmassenspektrometrie (Hoker et al., 2015) sowie Eigenschaften und Anwendung des neuen Aufbaus (Obersteiner et al., 2016a) behandeln. Mit den genannten Aufsätzen ist die Arbeitsgruppe Engel weltweit die erste, welche hochpräzise Analytik ha-logenierter Spurengase routinemäßig mittels Flugzeitmassenspektrometrie durchführt. Der nächste Schritt ist der Übergang von der Laboranwendung zur Feldmessung, z.B. in Form von bodenbasierter in situ Analyse troposphärischer Luftmassen am Taunus Observatorium auf dem Kleinen Feldberg. Da es bisher keine Messstation für die hier beschriebene analy-tische Fragestellung in Deutschland gibt, könnte eine deutliche Verbesserung der Überwa-chung halogenierter Treibhausgase und ozonzerstörender Substanzen in Europa erzielt wer-den. Weiterhin wäre eine Flugzeugapplikation in Zukunft denkbar, welche neben der durch das Flugzeitmassenspektrometer abgedeckten Substanzbandbreite auch von dessen hoher möglicher Spektrenrate profitieren könnte. In Kombination mit Hochgeschwindigkeitsgas-chromatographie könnte eine bisher unerreichte Zeitauflösung der Beprobung der Atmo-sphäre mittels Gaschromatographie-Massenspektrometrie erzielt werden.
Clouds and precipitation are essential climate variables. Because of their high spatial and temporal variability, their observation and modeling is difficult. In this thesis multiple observational data sources, including satellite data and station data are globally analyzed to understand the distribution and variability of clouds and precipitation, while a special focus is on the diurnal cycle of both variables. Substantial diurnal cycles of clouds and precipitation are observed in the tropics, with different properties over land and ocean. But also in Europe cloud diurnal cycles are observed in the summer season. Overall the maximum cloud cover and also the maximum precipitation is observed in the afternoon over land, and in the morning over ocean. The analyzed climate model simulations and the model-based reanalysis fail to simulate the observed diurnal cycles. Owing to their limited resolution, models can not fully resolve the processes responsible for the existence of diurnal cycles of clouds and precipitation.
The Earth’s surface condition we find today is a result of long exposure to metabolism of life forms. Particularly, molecular oxygen in the atmosphere is a feature which developed over time. The first substantial and lasting rise of atmospheric oxygen level happened ≈ 2.5 Ga ago, but localities are reported where transiently elevated oxygen levels appeared before this time-point. To trace the timing and circumstances of the earliest availability of free oxygen in the atmosphere is important to understand the habitats of early microbial life forms on Earth.
This thesis focuses to obtain information of oxygen levels and the related atmospheric cycling of metals in sediments of the 3.5 to 3.2 Ga Barberton Greenstone Belt. First, as iron was a ubiquitous constituent of Archean seawater, I investigated its isotopic composition in minerals of chemical sediments. Hereby, I tried to resolve the changes within the water basin on small scale sedimentary sequence cycles. Second, I focused on the minor constituents of Archean seawater. The Re-Os geochronologic system and the abundance patterns of the platinum-group elements were chosen to integrate information of oxygen promoted weathering of a large source area. To integrate information of a large time interval, the isotopes of uranium were investigated over a large stratigraphic section.
The two key findings of this thesis are:
• Quantitative oxidation of ferrous iron in surface layers of Paleoarchean seawater occurred during the onset and termination of hydrothermal FeIIaq delivery into shallow waters.
• Paleoarchean sedimentary successions of the Barberton Greenstone Belt lack any evidence of transient basin-scale oxygenation.
The Manzimnyama Iron Formation (IF, Fig Tree Group, Barberton Greenstone Belt, South Africa) has been deciphered to exist of cyclic stacks of lithostratigraphic units with varying amounts of iron oxide and carbonate minerals. In-situ femtosecond-Laser-Ablation ICP-MS iron isotope measurements showed that the majority of siderite (γ56Fe ≈ −0.5 ‰) precipitated directly from seawater of γ56Fe ≈ 0 ‰. Ferric iron from the surface layers is preserved in ≤ 1μ m hematite and in magnetite that has been grown within the consolidated sediment. During FeIIaq events, fine-grained hematite (γ56Fe ≈ 2.2 ‰) and magnetite (γ56Fe 0.5 to 0.8 ‰) indicate oxygen levels in surface waters of lower than 0.0002 μM. Upon onset and termination of iron oxide abundance, magnetite with γ56Fe ≈ 0 ‰ indicates that low concentrations of FeIIaq in surface waters were oxidized quantitatively. These observations demonstrate the existence of iron oxidation in Paleoarchean surface waters independent of FeIIaq concentration. This is the first investigation of Paleoarchean IF showing that lithostratigraphic cyclicity can be traced in iron isotopic composition of oxide minerals.
ID-ICP-MS measurement of Re, Ir, Ru, Pt and Pd, trace element (SF-ICP-MS) and ID-MCICP- MS uranium isotope determination have been applied to carbonaceous shale of the Mapepe Fm. (Fig Tree Group) after inverse Aqua Regia leaching and bulk digestion. The sediments reveal a silicified fraction which exhibits a seawater REE signature and a mixture of detrital and meteoritic PGE. Neither enrichment of the redox-sensitive elements Re or Mo nor fractionated uranium isotopes have been found on a stratigraphic interval of several hundred meters. The non-silica fraction shows no depletion of Re which indicates that the detrital material had no contact to oxidizing fluids. ID-TIMS measurements of Re and Os after the CrO3-SO4 Carius Tube method of two sample intervals showed that the Re-Os isotopic systems of the non-silica fractions are identical to two komatiite occurrences. Weltevreden Fm. and Komati Fm. rocks were uplifted, eroded and transported to the deep part of the sedimentary basin without any change to the Re-Os system. Negative fractionated uranium isotopes (γ238U = −0.41 ± 0.01 ‰) associated with detrital Ba-Cr-U occurrences suggest the existence of distal redox-processes that involve uranium species. This study demonstrates that over the time of exposure and deposition of the Mapepe Fm. sedimentation, free oxygen was not available for weathering in the catchment area.
Despite mounting evidence of the anthropogenic influence on the Earth's climate, underlying mechanisms of climate change often remain elusive. The investigation of periods of rapid climate change from geological archives may provide crucial information about magnitude, duration, teleconnections of and regional responses to global and hemispheric scale climate perturbations. Thus, paleoclimate reconstructions may help in mitigating and adapting to the challenges of the coming decades. The '8.2 kyr B.P. climatic event' has previously been proposed as a possible analogue for the future climatic scenario of a reduced Atlantic Meridional Overturning Circulation (AMOC). The catastrophic drainage of the Laurentide meltwater lakes through the Hudson Bay and into the Labrador Sea, that occurred ca. 8.47 kyr B.P., caused the slowdown of the AMOC around 8.2 kyr B.P.. Subsequently, reduced heat transfer towards Europe triggered a substantial decline in (winter) temperature and pronounced changes in atmospheric circulation patterns in many regions of the northern hemisphere, especially the North Atlantic realm and Europe. Among the regions affected by the 8.2 kyr B.P. climatic event, the Eastern Mediterranean region is of particular interest for both past and future climate developments. Traditionally characterized as a region highly sensitive to variations in the climate systems of the high and low latitudes, abrupt climate changes have the potential to strongly alter atmospheric circulation patterns and thus precipitation distribution in the region that may have severe socioeconomical consequences. The analysis of stable hydrogen (δD) and oxygen isotopes (δ18O) in precipitation is an excellent tool to trace changes in atmospheric circulation. Here, we present a comparative study of δD and δ18O in precipitation from the Eastern Mediterranean region both in a present day scenario and during the 8.2 kyr B.P. climatic event. We analyze the influences of topography, air mass trajectory, climate and seasonality among others the stable isotopic compositions of meteoric waters from the Central Anatolian Plateau (CAP), Turkey, in order to create a first-order template which may serve as a reference against which paleoenvironmental proxy data may be more accurately interpreted and tested. Further, we employ a multiproxy approach on the early Holocene peat deposits of the classical site of Tenaghi Philippon (TP), NE Greece, to investigate paleoenvironmental responses to northern hemisphere cooling during the 8.2 kyr B.P. climatic event and aim to determine changes atmospheric circulation from δD of leaf wax n-alkanes (δDwax).
Based on δD and δ18O data from more than 480 surface water samples from the CAP, we characterize moisture sources affecting the net isotopic budget of precipitation, manifesting in a systematic north-south difference in near-sea level moisture compositions. Rainout, induced by the major orographic barriers of the plateau, the Pontic Mountains to the north and the Taurus Mountains to the south, strongly shape the modern patterns of δD and δ18O. Stable isotope data from the semi-arid plateau interior provide clear evidence for an evaporitic regime that drastically affects surface water compositions. Strong evaporative enrichment contrasts rainfall patterns along the plateau margins, in part obfuscating the effects of topography and air mass trajectory.
Consequently, in order to address possible influences of evaporation on δD and δ18O in paleoprecipitation from TP, we analyze n-alkane abundances and distributions along with stable carbon isotope compositions of total organic carbon (δ13CTOC) and palynological data to estimate surface moisture conditions during the early Holocene (ca. 8.7 - 7.5 kyr B.P.) and especially during the 8.2 kyr B.P. climatic event. A period of relatively dry surface conditions from ca. 8.7 to 8.2 kyr B.P., indicated by low values of the 'aquatic index' (Paq ) and by elevated Average Chain Length (ACL) values, in concert with elevated δ13CTOC values, precedes the 8.2 kyr B.P. climatic event. The event itself is characterized by slightly wetter, more humid conditions, as suggested by an increase in Paq values as well as reduced ACL and δ13CTOC values between ca. 8.2 and 7.9 kyr B.P.. In the upper section of the core, a distinct change in paleohydrology becomes. A steep increase in Paq and a decrease in ACL values as well as variations in δ13CTOC from 7.9 kyr B.P. onwards imply considerably elevated surface moisture levels, likely caused by the increased activity of the karstic system of the surrounding mountains. Collectively, the biomarker proxies presented here, reveal a concise picture of changing moisture conditions at TP that is consistent with palynological data and provide detailed paleoenvironmental information for the analysis of δDwax as a paleoprecipitation proxy. The long-term decline in δDwax values characterizes the lower section of the core until ca. 8.2 kyr B.P.. The 8.2 kyr B.P. climatic event itself is connected to two distinct positive hydrogen isotope excursions: a minor shift in δDwax around 8.2 kyr B.P. and a major shift in δDwax between ca. 8.1 and 8.0 kyr B.P.. The upper part of the section shows a progressive trend towards higher δDwax values. With no indication of increased evaporitic conditions at TP during the 8.2 kyr B.P. climatic event, as evident in biomarker proxies and pollen data, we link shifts in δDwax to changes in Mediterranean air mass trajectories supplying precipitation to northeastern Greece, with variations in the relative contributions of northerly derived, D-depleted moisture and southerly-derived, D-enriched moisture. Possible control mechanisms include changes in the influence of the Siberian High and differences in the influence of the African and Asian monsoon circulations on anticyclonic conditions in the Mediterranean region as well as regional inflow of moist air from the Aegean Sea.
This PhD thesis has been carried out within an interdisciplinary cooperational project between the Deutsches Bergbau-Museum Bochum and the Goethe-Universität Frankfurt, which is dedicated to ancient Pb-Ag mining and metal production in the hinterland of the municipium Ulpiana in central Kosovo. Geochemical analysis (OM, XRD, EMP, MC-ICP-MS) of ores, metallurgical (by-) products and metal artefacts allowed to reconstruct the local chaîne opératoire and to decipher significant chronological differences between presumably Roman/late antique and medieval/early modern metallurgical processing. Pb isotope provenance studies documented the relevance of local metal production within the Roman Empire and confirmed the actual existence of a Metalla Dardanica district, which until now solely has been suspected on basis of epigraphy.
The predominant abundance of the by-products matte (Cu, Pb, Fe and Zn sulphides) and speiss (ferrous speiss: Fe-As compounds; base metal speiss: ~(Cu,Ni,Fe,Ag )x(Sb,Sn,As )y ) at smelting sites with a preliminary Roman/late antique dating points to treatment of complex polymetallic ore. Pb isotope analysis demonstrated that the mining district of Shashkoc-Janjevo (partially) supplied six of the ten investigated metallurgical sites. In this mineralisation, parageneses with elevated Cu, As and Sb abundances comprise significant proportions of particularly tennantite-tetrahedrite minerals, chalcopyrite, arsenopyrite and were generated during the early and main stages of ore formation. Later precipitated ore in contrast is marked by a significantly less versatile mineralogy and consists almost exclusively of galena, sphalerite and pyrite/marcasite. Besides increased Cu, As and Sb contents, ore from the main formation stage also exhibits generally higher Ag abundances, which are mainly hosted by fahlore and locally abundant secondary Cu sulphides (chalcocite, digenite and covellite) and oxidised phases (e.g. malachite, azurite). The higher precious metal grades of this ore type, whose geochemical signature (i.e. higher proportions of Cu, As and Sb) is mirrored by the abundance of the metallurgical by-products matte and speiss (almost exclusively found at potentially Roman/late antique smelting sites; see above), presumably were a pivotal factor leading to its preferential exploitation in earlier times. Matte and base metal-rich speiss contain notable amounts of Ag, which are mainly present in Cu-(Fe) sulphides and particularly antimonides ((Cu,Ni)2Sb, Ag3Sb), respectively. While the speiss compounds due to their close association with Pb bullion presumably were cupelled automatically, the metallurgical treatment of matte could not have been proven unambiguously, but overall certainly is highly likely.
The beneficiated ore (i.e. crushed and sorted, potentially also treated by more lavish techniques such as grinding, sieving or wet-mechanical methods) possibly was partially roasted and subsequently together with fluxes and charcoal submitted to the furnaces. The working temperatures approximately ranged between 1100 and 1400 °C. Slags from all presumably Roman/late antique dated and few of their potentially medieval/early modern analogues were produced from smelting of (partially roasted) ore with charcoal and added siliceous material, thus resulting in fayalite-dominant phase assemblages or rarely observed glassy parageneses. Even though several subtypes of fayalite slags have been established on basis of the abundance of Fe-rich oxide phases (i.e. spinel ss and wüstite), late clinopyroxene and the general solidification sequence of the slags, the process conditions (i.e. temperature, fO2, added fluxing agents) must have been widely similar; chemical variations could be explained by varying degrees of interaction of the slag melt with charcoal ash and furnace material. The other investigated metallurgical remains indicate employment of a calcareous flux, which led to formation of Ca-rich olivine-, olivine+clinopyroxene-, clinopyroxene- or melilite-type slags. These types as well as glassy slags were generated at more oxidising conditions outside the fayalite stability field (FMQ buffer equilibrium, cf. Lindsley, 1976) than their olivine-dominant analogues. Conclusions on the furnace construction could be drawn on basis of the typology of the slags, which mostly were tapped into a basin located outside the furnace, but partially (at two presumably medieval/early modern sites) also accumulated in a reservoir within the smelter.
Lead artefacts excavated in Ulpiana could be isotopically related to ores from mineralisations in its vicinity and demonstrate that the resources were at least utilised for local metal production. However, also ship wreck cargo from Israel - including several lead ingots with the inscription 'MET DARD' (Raban, 1999) - and late antique lead-glazed pottery from Serbia and Romania (Walton & Tite, 2010) could be related to a possible Kosovarian/Serbian provenance of the raw material and thus indicate flourishing trade of metal from the Metalla Dardanica district within the Roman Empire.
References:
Lindsley, D. H. (1976). Experimental studies of oxide minerals. In D. Rumble, III (Hrsg.), Oxide minerals (61-88). Reviews in Mineralogy, Volume 3. Washington, DC: Mineralogical Society of America.
Raban, A. (1999). The lead ingots from the wreck site (area K8). Journal of Roman Archaeology, Supplementary Series, 35, 179-188.
Walton, M. S., & Tite, M. S. (2010). Production technology of Roman lead-glazed pottery and its continuance into late antiquity. Archaeometry, 52(5), 733-759.