Refine
Year of publication
- 2006 (17) (remove)
Document Type
- Doctoral Thesis (17) (remove)
Has Fulltext
- yes (17)
Is part of the Bibliography
- no (17)
Keywords
- Photon (2)
- Schwerionenphysik (2)
- Zeitprojektionskammer (2)
- Absolute Phase (1)
- Binary encounter approximation (1)
- Carrier Envelope Phase (1)
- Chirale Symmetrie (1)
- Dotierter Halbleiter (1)
- Effective Lagrangians (1)
- Effektive Lagrangeans (1)
Institute
- Physik (17) (remove)
Nuclear matter, that takes the form of protons and neutrons under normal conditions, is subject to a phase transition at high temperatures and densities, liberating the quarks and gluons that are usually confined in nucleons and creating a medium of free partons: the Quark-Gluon-Plasma. It is generally believed that this state of matter can be created in relativistic collisions of heavy nuclei. The study of the medium created in these collisions is the subject of heavy-ion physics. One topic within this field are particles with high transverse momentum, that are created in initial hard collisions between partons of the incoming nuclei. The energetic partons lose energy due to interactions with the medium before they fragment into a jet of hadrons. Due to momentum conservation, these jets are usually created as back-to-back pairs, or less commonly as three-jet or photon-jet events, where a single jet is balanced by a hard photon. The energy loss can be measured using correlations between particles with high transverse momenta. A trigger particle is selected with very high transversemomentum and the distribution of the azimuthal angle of associated particles in the same event is studied, relative to the azimuth of the trigger particle.These azimuthal correlations show a peak for opening angles around 0 from particles selected from the same jet, and a second peak at opening angles around 180 degrees from back-to-back di-jets. Random combinations with the underlying event generate a flat background, extending over the full range of opening angles. The STAR experiment observed a modification of these correlations in central Au+Au collisions, where trigger particles with 4GeV < pT(trigger) < 6GeV and associated particles with 2GeV < pT(trigger) < 4GeV were selected. A strong suppression has been observed for away-side correlations in central Au+Au collisions, relative to p+p, d+Au and peripheral Au+Au data. This can be explained by assuming two partons going in opposite directions, where at least one has to travel a large distance through the medium, causing energy loss and effectively removing the event from the analysis. For near-side correlations, no significant modification has been observed, which can be explained by surface emission, assuming that the observed jets have travelled only a short distance in themedium, not leaving enough time for interactions with the medium. Both trigger- and associated particles in a correlation analysis with charged hadrons are subject to modifications due to the medium. This can be avoided by using photon-jet events instead of di-jets, because the photon does not interact with the medium and therefore provides the best available measure of the properties of the opposite jet in the presence of the underlying event. This thesis studies azimuthal correlations between regions of high energy deposition in the electro-magnetic calorimeter as trigger- and charged tracks as associated particles. The data sample had been enriched by online event selection, allowing for the selection of trigger particles with a transverse energy of more than 10GeV and associated particles with more than 2,3 or 4 GeV. The away-side yield per trigger particle is strongly suppressed like in correlations between charged particles. The near-side yield is also reduced by about a factor two, clearly different from charged correlations. The trigger particles are a mixture of photon pairs from the decays of neutral pions and single photons, mainly from photon-jet events, with small contributions from other hadron decays and fragmentation photons. Pythia simulations predict a ratio of neutral pions to prompt photons of 3.5:1 in p+p collisions with the same cuts as in the presented analysis. Single particle suppression further reduces this ratio in central Au_Au collisions, down to about 0.8:1, indicating that the majority of trigger particles in central Au+Au collisions are prompt photons. The increasing fraction of prompt photon triggers without an accompanying jet and therefore zero associated yield reduces the average yield per trigger particle. The magnitude of the observed effect agrees well with the expectation from Pythia simulations and the assumption of a single particle suppression by a factor 4-5. An analysis of away-side correlations is more difficult, because both photon-jet and di-jet events contribute. The aim is the separation of these two contributions. As a clear separation is not possible with the available dataset, a comparison with two different scenarios is given, where a surprisingly small suppression by only a factor of about 5 is favoured for both dijet- and photon-jet-correlations. A separate measurement of both contributions will be possible by a shower-shape analysis with the EM calorimeter or a comparison with charged correlations in the same kinematic region.
Studies and measurements of linear coupling and nonlinearities in hadron circular accelerators
(2006)
In this thesis a beam-based method has been developed to measure the strength and the polarity of corrector magnets (skew quadrupoles and sextupoles) in circular accelerators. The algorithm is based on the harmonic analysis (via FFT) of beam position monitor (BPM) data taken turn by turn from an accelerator in operation. It has been shown that, from the differences of the spectral line amplitudes between two consecutive BPMs, both the strength and the polarity of non-linear elements placed in between can be measured. The method has been successfully tested using existing BPM data from the SPS of CERN, since presently the SIS-18 is not equipped with the necessary hardware. The magnet strength of seven SPS extraction sextupoles was measured with a precision of about 10%. The polarities have been unambiguously measured. This method can be used to detect polarity errors and wrong power supply connections during machine commissioning, as well as for a continuous monitoring of the "nonlinearity budget" in superconducting machines. A second beam-based method has been studied for a fast measurement and correction of betatron coupling driven by skew quadrupole field errors and tilted focusing quadrupoles. Traditional methods usually require a time-consuming scan of the corrector magnets in order to minimize the coupling stop band |C|. In this thesis it has been shown how the same correction can be performed in a single machine cycle from the harmonic analysis of multi-BPM data. The method has been successfully applied to RHIC. It has been shown that the stop band |C| (also known in the American literature as Delta-Qmin) measured in a single machine cycle with the new algorithm is compatible with the value obtained by traditional methods. The measurement of the resonance phase Theta defines automatically the best corrector setting, which was found in agreement with the one obtained with a traditional scan. A third theoretical achievement is a new description of the betatron motion close to the difference resonance in presence of linear coupling. Compared to the matrix formalism the motion is parametrized as a function of the resonance driving term f1001 only (which is proven to be an observable), whereas making use of the matrix approach four parameters need to be measured. Formulae describing the exchange of RMS emittances when approaching the resonances have been already derived in the 70s in the smooth approximation. New formulae have been derived here making use of Lie algebra providing a better description of the emittance behavior. The emittance exchange curves are predicted by new formulae with excellent agreement with multi-particle simulations and the counter-intuitive emittance variation along the ring of the emittance is proven to be related to the variation of f1001. A new way to decouple the equations of motion and explicit expressions for the individual single particle invariants have been found. For the first time emittance exchange studies have been carried out in the SIS-18 of GSI. Transverse RMS emittances have been measured during 2005 from rest gas monitor (RGM) data. Crossing the linear coupling resonance, the transverse emittances exchange completely. It has been observed that this effect is reversible. Applications of this manipulation are: emittance equilibration under consideration for future operations of the SIS-18 as booster for the SIS-100; emittance transfer during multi-turn injection to improve the eficiency and to protect the injection septum in high intensity operations, by shifting part of the horizontal emittance into the vertical plane. The emittance exchange curves obtained experimentally have been compared with analytic formulae providing a fast measurement (in few machine cycles only) of the linear coupling stop band |C|. Technical problems prevented the use of the eight skew quadrupoles installed in the SIS-18 to compensate the linear coupling resonance. It has been observed that the emittance exchange curve is highly sensitive to the beam intensity. Multi-particle simulations with 2D PIC space-charge solver have been run to infer heuristic scaling laws able to quantify the observable stop band, to be used for the resonance compensation. The analysis of BPM and RGM data has been performed making use of new software applications developed for this purpose. The bpm2rdt code for the harmonic analysis of BPM data has been written and tested with real data. The software reads the BPM turn-by-turn data and the Twiss parameters. Then it performs the FFT of these data, finds the peaks of the Fourier spectra and infers the RDT fjklm, the strengths ^hjklm and the local terms lambda-jklm. All these observables are printed out together with the corresponding values of the model, computed from the nominal values of strengths and the Twiss parameters. From the FFT of dual-plane BPM data the linear optics (beta functions and phase advances Delta phi) at the corresponding location is also inferred. From the measurement of f1000, the linear coupling coeffcient C (amplitude and phase) is also computed. The code has been tested by using existing SPS data and new RHIC data. For the on-line analysis of RGM data the rgm2emitt code has been written. The application reads in input the raw data files from the RGM and the beam loss monitor (BLM) respectively, the latter created by the RGM on-line software itself. From the RGM data the transverse beam sizes and emittances are inferred and used together with the BLM data to compute the tune shift during the machine cycle.
In der vorliegenden Arbeit wird die Kopplung von Bloch- und Zyklotron-Oszillationen in Halbleiterübergittern unter dem Einfluss eines elektrischen und magnetischen Feldes zeitaufgelöst-elektro-optisch untersucht. Hierbei hängen sowohl die Stärke der Bloch-Zyklotron-Kopplung als auch die Charakteristika der kohärenten Ladungsträgerbewegung sensitiv von der relativen Anordnung der äußeren Felder ab. Bei gekreuzter Feldanordnung wird der Kohärente Hall-Effekt beobachtet. Semiklassisch lässt sich die Ladungsträgerdynamik in diesem Fall mit der Bewegungsgleichung eines nicht getriebenen, ungedämpften Pendels beschreiben. Abhängig vom Verhältnis E/B der äußeren Feldstärken lassen sich zwei Bewegungsregime mit gegensätzlicher Feldabhängigkeit der Frequenz der Ladungsträgeroszillationen unterscheiden. Bei schiefer Feldanordnung kommt es durch die nichtlineare Kopplung der Bloch-Oszillation mit der Zyklotron-Oszillation in der Übergitterebene zu einer phasenempfindlichen Gleichrichtung der transienten Oszillationen entlang der Wachstumsrichtung, wobei man in Resonanz eine Überhöhung dieses selbstinduzierten Gleichstroms beobachtet. In Anlehnung an ein analoges Phänomen, das an Josephson-Kontakten beobachtet wird, sprechen wir hierbei vom Fiske-Effekt. Für die räumliche Auslenkung X("unendlich") entlang der Wachstumsrichtung nach Abklingen der Kohärenz kann im Rahmen einer analytischen semiklassischen Näherung ein geschlossener Ausdruck angegeben werden. Die zeitaufgelösten Experimente zur Bloch-Zyklotron-Kopplung werden an zwei GaAs/Al0,3Ga0,7As-Übergitterstrukturen mit unterschiedlicher Quantentopfbreite durchgeführt. Im Spezialfall der gekreuzten Feldanordnung wird der Kohärente Hall-Effekt anhand der Existenz zweier Bewegungsregime mit ihrem charakteristischen Frequenz- und Dephasierungsverhalten in Abhängigkeit der äußeren Felder nachgewiesen und die lineare Abhängigkeit des Magnetfeldes am Übergang zwischen den Bewegungsregimen vom elektrischen Feld gezeigt. Die gleichermaßen prognostizierte Zunahme der Intensität höherer harmonischer Moden der Ladungsträgeroszillationen in der Nähe des Übergangs wird jedoch in der elektro-optischen Respons nicht beobachtet, wenngleich die verwendeten elektro-optischen Messtechniken im Vergleich zur Terahertz-Emissionsspektroskopie zur Untersuchung des Übergangsbereichs und höher frequenter Oszillationen prinzipiell besser geeignet sein sollten. Hierbei bestehende Einschränkungen werden diskutiert. Der für den Fall der schiefen Feldanordnung vorhergesagte selbstinduzierte Gleichstrom manifestiert sich experimentell in einem resonanzartigen Verlauf des elektro-optischen Signals nach Abklingen der Oszillationen in Abhängigkeit des Magnetfeldes. Durch Vergleich mit dem analytisch hergeleiteten Ausdruck für die räumliche Auslenkung lassen sich hieraus die relevanten Dämpfungskonstanten abschätzen und durch iterative Anpassung bestimmen. Die bei schiefer Feldanordnung mittels elektro-optischer Spektroskopie gemessenen Signale weisen nach Abklingen der kohärenten Ladungsträgeroszillationen nur einen sehr schwachen Driftanteil auf. Eine schlüssige Erklärung für diese Beobachtung ergibt sich, wenn bei der Behandlung der Ladungsträgerdynamik die Impuls- und Energierelaxation des Bloch-Oszillators unterschieden werden und eine sehr kleine Energiedämpfung angenommen wird.
In der vorliegenden Arbeit wird die Anwendung einer optischen Detektionsmethode zur Messung der magnetischen Eigenschaften eines verdünnten Systems angewandt und zur Untersuchung von High-Spin–Low-Spin-Komplexen etabliert. Die von uns angewandte MCD-Spektroskopie vereint eine optische Messtechnik, die auf die Messung ultraschneller Effekte erweiterbar ist, mit einer direkten Messmethode für die magnetischen Eigenschaften einer verdünnten Probe des LD-LISC-Komplexes Fe(stpy)4(NCSe)2 (stpy = 4-styrylpyridin). Der LD-LISC-Effekt ist ein licht-induzierter Spinübergang, der auftreten kann, wenn von einem Paar metallorganischer Komplexe eines einen thermischen Spinübergang aufweist und optisch zwischen den beiden Komplexes geschaltet werden kann, beispielsweise durch eine Photoisomerisation. Im Falle von Fe(stpy)4(NCSe)2 ist der cis-Komplex für alle Temperaturen im high-Spin-Zustand, während der trans-Komplex einen thermischen Spinübergang aufzeigt. Mit MCD-Spektroskopie wurde die Magnetisierung des Grundzustands des Fe(II)(stpy)4 (NCS)2-Komplexes in der trans- und der cis-Konfiguration in verdünnten dotierten Polymerfilmen untersucht. Diese magnetooptische Spektroskopie-Technik ermöglicht die Identifizierung von MLCT-Bändern des Eisen-Komplexes, die in optischen Spektren durch stärkere Ligandenabsorptionsbäder überlagert sind und sich nur schlecht auflösen lassen. Das untersuchte System dient als Beispiel für eine Reihe von Verbindungen, die photoschaltbare magnetische Eigenschaften besitzen. Für den Komplex in der cis-Form können bei tiefen Temperaturen durch die Messung von MCD-Daten bei variablem Feld und variabler Temperatur der Spinzustand, der g-Tensor und die Übergangspolarisierung M, sowie achsiale und rhombische Verzerrungen der oktaedrischen Geometrie des Moleküls bestimmt werden. Für den Komplex in der trans-Form konnte erstmals der Unterschied im Spinübergangsverhalten zwischen einer verdünnten Probe und einer konzentrierten Pulverprobe mit einem High-Spin–Low-Spin-Übergangskomplex gezeigt werden. Mit MCD-Spektroskopie konnten die Spinübergangsparameter bestimmt werden, die mit SQUID-Magnetometrie nur unzureichend untersucht werden können. Erste Messungen der MCD-Spektren während gleichzeitiger optischer Anregung zur Beobachtung des LD-LISC-Effekts auf langsamen Zeitskalen zeigen keine Änderung der MCD-Spektren trotz ausreichender Anregungsleistung, die zu einer deutlich messbaren Photoisomerisation geführt hat. Bei einer Temperatur von 120K der Messung ist der trans-Komplex bereits zu einem großen Teil im High-Spin-Zustand, so daß der Unterschied zwischen den Spinzuständen des cis- und des trans-Zustandes unterhalb der Auflösung des verwendeten Aufbaus liegt. Die in dieser Arbeit erzielten Resultate demonstrieren, daß die MCD-Spektroskopie eine geeignete Technik zur Messung des magnetischen Zustands von LD-LISC-Komplexen (oder anderen Komplexen) in verdünnten, zufällig orientierten Proben ist.
This work gives a detailed introduction into a fully new experimental method to investigate the quantum crystal behavior of solid Helium-4. It has been found that a fascinating new effect occurs in the expansion of solid Helium-4 into a vacuum through pinhole orifices with diameters between 1 and 5 µm. It is observed that the beam flux intensity shows a periodic behavior for source conditions corresponding to the solid phase of Helium-4. The period is in the range of seconds up to minutes. It shows a strong dependence on temperature and source pressure. The oscillating part of the beam flux intensity amounts several percent of the total flux. This new phenomenon has been studied for temperatures between 2.1 K and 1.3 K and pressures up to 30 bar above the melting pressure. The beam flux intensity has been recorded by the vacuum pressure in a pitot vacuum chamber. The jet velocity in the range of 200 m/sec indicates that surprisingly the beam is a liquid jet, whereas the conditions in the source correspond to the solid state. In this work mainly the behavior of the flux modulation has been studied as a function of pressure and temperature and the influence of the isotope Helium-3. Furthermore geometrical aspects such as the influence of the nozzle diameter d0 have been investigated. In order to explain this novel phenomenon a kinetic model based on the injection of excess vacancies into the solid is proposed. According to this model the vacancies are generated at a solid/liquid interface. Forced by drift and diffusion they accumulate at some distance from the orifice, leading to the collapse of the solid. With the subsequent re-injection of vacancies the effect repeats and turns out to be periodical. The reproducibility of the time dependent beam flux intensity is demonstrated for a wide range of temperatures and pressures and gives direct access to values such as the temperature and pressure dependence of the vacancy diffusion coefficient Dv in the range of 10 high -5 cm high 2/sec, the recombination time of vacancies with interstitials T r near 1-20 sec and the vacancy activation energy f near 20 K. The good agreement with former experimental results by Zuev et al. [131] confirms the applicability of the theoretical model. As a result from the kinetic model the vacancy concentration is increased above the equilibrium vacancy concentration, caused by the injection of excess vacancies. Therefore, the most important discovery is the possibility of generating a non-equilibrium quantum solid. The investigation of this non-equilibrium solid leads to the discovery of a fluid-like regime in the solid phase of Helium-4 at temperatures below T = 1.58 K. The result gives a strong indication for the supersolid state, especially because the fluid-like behavior of the solid can be eliminated with smallest concentrations of Helium-3.
In the present work we applied the Optically read out PArticle track Chamber, OPAC, for the measurement of radial dose distributions, d(r), around tracks of heavy ions passing through the gas-filled sensitive volume of the chamber. The measured data were compared with d(r) functions derived from data calculated with the Monte Carlo particle transport code, TRAX – which is used for the heavy ion therapy planning at GSI. To measure this quantity we have used here an optically read out time projection chamber (OPAC) with a parallel-drift field and one or several electron and light amplification stages. The two dimensional projection of the three dimensional ionization pattern caused by the ionizing particle passing through the chamber is captured by an image intensified CCD camera. The work is motivated by the role the radial dose distribution plays in the estimation of the relative biological effectiveness (RBE) of heavy ions, e.g. in radiation therapy and in radiation protection. The most successful model for high-dose irradiation with ions (applicable e.g. for heavy ion therapy) is found to be the local effect model (LEM). The present work intends to deliver measured data for one of the basic physical parameters which serve as input for the application of the local effect model: the radial dose distribution, d(r). The first goal of our measurement program was the measurement of d(r) distributions around carbon ions of different energies from 400 MeV/u down to the Bragg peak regions. We found an excellent agreement between the measured and simulated distributions at all carbon energies for the r–range in which the measurements deliver useful results. The lower limit of this range is about 100 nm and the upper limit is 6000 nm at a resolution of down to 33 nm - if scaled to water density. Despite the simplifications in the TRAX code (e.g. binary encounter theory for the emission ionization electrons), the discrepancies between the simulated and measured d(r) distributions are found to be lower than the measurement uncertainties at most measured carbon ion energies in almost the whole observed r-range. Hence, within the limitations of our measurements we can conclude that the precision of TRAX is sufficient to simulate the d(r) distributions around carbon ions to serve as input parameter for therapy planning. However, this conclusion is only valid for larger radial distances (r >100 nm). For smaller radial distances the measured data are dominated by the diffusion. Apart from carbon ion tracks, tracks of very heavy ions (40Ar, 84Kr and 238U) were also measured with OPAC. The simulated d(r) values were typically slightly or significantly higher than the measured data in the 100 nm < r < 5000 nm region. The experience has shown: the heavier or the faster the ion, the higher the discrepancies. On the one hand, we found a surprisingly good agreement between measurements and simulations if the ions had energies of around 50 MeV/u (i.e. relatively low energy). On the other hand, at higher energies, simulated data underestimate the measured ones by up to a factor of two in the region of 100 nm < r < 1000 nm for 84Kr (E = 650 MeV/u) or in the region of 100 nm < r < 6000 nm for 238U (E = 1 GeV/u). A possible reason for these discrepancies is that the BEA model, used in TRAX for the production ionization electrons, is not adequate for very heavy projectiles. The energy values of the very heavy ions were selected with the aim of comparing the track structures - and namely the d(r) distributions - of ions with largely different atomic mass but similar LET values. From the Z-dependency of the stopping power we know that for heavier ions a higher specific ion energy (expressed in MeV/u) is required to provide the same LET. For example the common LET of 315 keV/micro-m was achieved at largely different specific energy levels of 4,4 MeV/u for 12C, 65 MeV/u for 40Ar and 650 MeV/u for 84Kr ions. The difference in the track structures was expected mainly due to the different ion velocities and thus e.g. different ranges of d-electrons. This expectation could be confirmed by the measurements. The reason why - in line with the simulations - no strong differences could be observed in the d(r) distributions of the argon and krypton ions is the relatively small difference in the velocities of the both ion types in conjunction with the limited range in r, where the data can be compared. In contrary, the d(r) function of the carbon ion shows a qualitatively different behavior than the heavier ions inside the observable radius-range - in agreement with the simulations.
In dieser Arbeit wurden zum ersten Mal explizite Ausdrücke für Strahlungskorrekturen zur Grundzustandsenergie der relativistischen Dichtefunktionaltheorie hergeleitet und im Rahmen einer Langwellennäherung ausgewertet. Dazu wurde, ausgehend von einer angemessenen Zerlegung des Wechselwirkungs-Hamiltonians (2.23), ein DFT-Analogon zu Sucher's Level-Shift Formel abgeleitet, G1. (3.54). Mit Hilfe der Ausdrücke für die Gesamtenergie Etd (3.17), die Hartree-Energie EH (3.21) sowie die korrespondierenden Potentiale (3.29), (3.30) und der Grundzustandsenergie des nichtwechselwirkenden KS-Systems, (3.41), kann diese DFT Level-Shift Formel dann mit dem Austauschkorrelationsenergiefunktional in Verbindung gebracht werden. Der resultierende Ausdruck für den Level-Shift, G1. (3.55), liefert eine exakte Darstellung des Austauschkorrelationsenergiefunktionals der RDFT. Dieses Funktional ist ein implizites Dichtefunktional, da es von den KS-Orbitalen und Eigenwerten abhängt. Der Vergleich mit dem Ausdruck für Exc aus Kapitel 6.1, der das Ergebnis des in der DFT weit verbreiteten Kopplungskonstantenintegrations-Schemas ist, zeigt, dass beide Zugänge vollkommen äquivalent sind. Allerdings wurde die in dieser Dissertation erarbeitete DFT Level-Shift Formel analog zur Standard QED-Störungsreihe abgeleitet und stellt damit einen idealen Zugang für , die Untersuchung von QED-Effekten im Rahmen relativistischer DFT dar. Insbesondere beinhaltet unser Zugang das bekannte QED-Schema, wenn man im Störanteil des Hamiltonoperators (3.32) das KS-Potential ... (3.29) durch das Potential eines wasserstoffartigen Systems ersetzt. Eine selbstkonsistente Anwendung dieses Zugangs verlangt jedoch die Lösung der relativistischen OPM-Integralgleichung. Während in Kapitel 4 gezeigt wurde, dass dies für den transversalen Austausch relativ direkt möglich ist, ist bisher noch nicht explizit überprüft worden, wie Vakuumkorrekturen im Zusammenspiel mit der OPM-Integralgleichung zu berücksichtigen sind. Da eine solche Untersuchung den Rahmen der vorliegenden Arbeit gesprengt hätte, haben wir uns auf eine perturbative Auswertung der Ausdrücke für Vakuumpolarisation und Vertexkorrektur beschränkt. .....
Diese Arbeit beschäftigt sich mit der Synthese und der Einkristallzüchtung der beiden Spin-Leiter-Verbindungen SrCu203 und Sr2Cu3O5 unter hohem Druck. Zunächst wird in einer Reihe von Versuchen ein geeignetes Tiegelmaterial ermittelt. Dabei stellen sich eine Doppeltiegelkonstuktion mit einem einkristallinen Magnesiumoxid-Innentiegel und einem verschweißbaren äußeren Platintiegel als beste Materialkombination heraus. Die Standzeit eines Versuchs lässt sich hiermit von den in der Literatur üblichen 30 Minuten um das 50 bis 100-fache verlängern. Durch Verwendung dieser Tiegelkombination können erstmals Züchtungsexperimente von SrCu203 und Sr2Cu305 aus der Schmelze erfolgreich durchgeführt werden. Für beide Zusammensetzungen konnten Kristalle mit Kantenlängen bis zu 2 mm hergestellt werden. Die besten Wachstumsbedingungen für SrCu203 liegen zwischen 3 und 5 GPa und zwischen 1400°C und etwa 1200°C. Diese Bedingungen wurden für stöchiometrische und auf etwa 70% Cu0 erhöhte Einwaagenzusammensetzungen ermittelt. Für Sr2Cu305 gelten ähnliche Züchtungsparameter. Durch die Züchtungsexperimente wurden neue Phasen, wie eine unbekannte Modifikation von Sr2Cu305 und eine nicht näher identifizierte ,243'-Phase gefunden. Das Auftreten der Fremdphase Sr2Cu02(C03) war zunächst überraschend und klärte sich durch den Herstellungsprozess der MgO-Einkristalle auf. Der Einbau des aus dem Tiegel stammenden gelösten Magnesiums wird in der die Cu203-Schichten trennenden Strontiumschicht erwartet. Damit erlangt es keine Wirkung auf die Spin-Leiter-typischen Effekte. Durch zahlreiche Messungen mit wellenlängendispersiver Röntgenanalyse am Rasterelektronenmikroskop wurden die maßgeblichen Reaktionswege aufgeklärt und die besten Wachtumsbedingungen sowie die Fremdphasenreaktionen ermittelt. Die Ergebnisse der Raman- und IR-Spektroskopie bestätigen das Auftreten der Struktur- beziehungsweise verbindungstypischen 2-Magnonen- und 2-Magnonplus-Phonon-Quasiteilchen. Durch Polarisationsmikroskopie und optische Transmissionsuntersuchungen konnte nachgewiesen werden, dass es sich bei den Proben um Einkristalle handelt. Die thermische Ausdehnung zeigt eine deutliche Anisotropie. Die Achsen in a- und b-Richtung besitzen niedrige und von der C-Richtung deutliche verschiedene lineare Ausdehnungskoeffizienten.
A new technique for precision ion implantation has been developed. A scanning probe has been equipped with a small aperture and incorporated into an ion beamline, so that ions can be implanted through the aperture into a sample. By using a scanning probe the target can be imaged in a non-destructive way prior to implantation and the probe together with the aperture can be placed at the desired location with nanometer precision. In this work first results of a scanning probe integrated into an ion beamline are presented. A placement resolution of about 120 nm is reported. The final placement accuracy is determined by the size of the aperture hole and by the straggle of the implanted ion inside the target material. The limits of this technology are expected to be set by the latter, which is of the order of 10 nm for low energy ions. This research has been carried out in the context of a larger program concerned with the development of quantum computer test structures. For that the placement accuracy needs to be increased and a detector for single ion detection has to be integrated into the setup. Both issues are discussed in this thesis. To achieve single ion detection highly charged ions are used for the implantation, as in addition to their kinetic energy they also deposit their potential energy in the target material, therefore making detection easier. A special ion source for producing these highly charged ions was used and their creation and interactions with solids of are discussed in detail.