Refine
Year of publication
- 2010 (87) (remove)
Document Type
- Doctoral Thesis (34)
- Article (25)
- Conference Proceeding (13)
- Bachelor Thesis (5)
- diplomthesis (5)
- Diploma Thesis (4)
- Part of Periodical (1)
Has Fulltext
- yes (87)
Is part of the Bibliography
- no (87)
Keywords
- LHC (4)
- Ionenstrahl (3)
- ALICE (2)
- Computersimulation (2)
- Emittanz (2)
- Hadron (2)
- Kernmaterie (2)
- Molekulardynamik (2)
- Monte-Carlo-Simulation (2)
- Quantenchromodynamik (2)
Institute
- Physik (87) (remove)
CMOS sensors are the most promising candidates for the Micro-Vertex-Detector (MVD) of the CBM experiment at GSI, as they provide an unprecedented compromise between spatial resolution, low material budget, adequate radiation tolerance and readout speed. To study the integration of these sensors into a detector module, a so-called MVD-demonstrator has been developed. The demonstrator and its in-beam performance will be presented and discussed in this work.
This dissertation is devoted to the study of thermodynamics for quantum gauge theories.The poor convergence of quantum field theory at finite temperature has been the main obstacle in the practical applications of thermal QCD for decades. In this dissertation I apply hard-thermal-loop perturbation theory, which is a gauge-invariant reorganization of the conventional perturbative expansion for quantum gauge theories to the thermodynamics of QED and Yang-Mills theory to three-loop order. For the Abelian case, I present a calculation of the free energy of a hot gas of electrons and photons by expanding in a power series in mD/T, mf /T and e2, where mD and mf are the photon and electron thermal masses, respectively, and e is the coupling constant.I demonstrate that the hard-thermal-loop perturbation reorganization improves the convergence of the successive approximations to the QED free energy at large coupling, e ~ 2. For the non-Abelian case, I present a calculation of the free energy of a hot gas of gluons by expanding in a power series in mD/T and g2, where mD is the gluon thermal mass and g is the coupling constant. I show that at three-loop order hard-thermal-loop perturbation theory is compatible with lattice results for the pressure, energy density, and entropy down to temperatures T ~ 2 - 3 Tc. The results suggest that HTLpt provides a systematic framework that can be used to calculate static and dynamic quantities for temperatures relevant at LHC.
In this Letter we study the radiation measured by an accelerated detector, coupled to a scalar field, in the presence of a fundamental minimal length. The latter is implemented by means of a modified momentum space Green's function. After calibrating the detector, we find that the net flux of field quanta is negligible, and that there is no Planckian spectrum. We discuss possible interpretations of this result, and we comment on experimental implications in heavy ion collisions and atomic systems.
The aim of this work is to develop an effective equation of state for QCD, having the correct asymptotic degrees of freedom, to be used as input for dynamical studies of heavy ion collisions. We present an approach for modeling an EoS that respects the symmetries underlying QCD, and includes the correct asymptotic degrees of freedom, i.e. quarks and gluons at high temperature and hadrons in the low-temperature limit. We achieve this by including quarks degrees of freedom and the thermal contribution of the Polyakov loop in a hadronic chiral sigma-omega model. The hadronic part of the model is a nonlinear realization of an sigma-omega model. As the fundamental symmetries of QCD should also be present in its hadronic states such an approach is widely used to describe hadron properties below and around Tc. The quarks are introduced as thermal quasi particles, coupling to the Polyakov loop, while the dynamics of the Polyakov loop are controlled by a potential term which is fitted to reproduce pure gauge lattice data. In this model the sigma field serves a the order parameter for chiral restoration and the Polyakov loop as order parameter for deconfinement. The hadrons are suppressed at high densities by excluded volume corrections. As a next step, we introduce our new HQ model equation of state in a microscopic+macroscopic hybrid approach to heavy ion collisions. This hybrid approach is based on the Ultra-relativistic Quantum Molecular Dynamics (UrQMD) transport approach with an intermediate hydrodynamical evolution for the hot and dense stage of the collision. The present implementation allows to compare pure microscopic transport calculations with hydrodynamic calculations using exactly the same initial conditions and freeze-out procedure. The effects of the change in the underlying dynamics - ideal fluid dynamics vs. non-equilibrium transport theory - are explored. The final pion and proton multiplicities are lower in the hybrid model calculation due to the isentropic hydrodynamic expansion while the yields for strange particles are enhanced due to the local equilibrium in the hydrodynamic evolution. The elliptic and directed flow are shown to be not sensitive to changes in the EoS while the smaller mean free path in the hydrodynamic evolution reflects directly in higher flow results which are consistent with the experimental data. This finding indicates qualitatively that physical mechanisms like viscosity and other non equilibrium effects play an essentially more important role than the EoS when bulk observables like flow are investigated. In the last chapter, results for the thermal production of MEMOs in nucleus-nucleus collisions from a combined micro+macro approach are presented. Multiplicities, rapidity and transverse momentum spectra are predicted for Pb+Pb interaction at different beam energies. The presented excitation functions for various MEMO multiplicities show a clear maximum at the upper FAIR energy regime making this facility the ideal place to study the production of these exotic forms of multistrange objects.
This paper introduces a new methodology for the fabrication of strain-sensor elements for MEMS and NEMS applications based on the tunneling effect in nano-granular metals. The strain-sensor elements are prepared by the maskless lithography technique of focused electron-beam-induced deposition (FEBID) employing the precursor trimethylmethylcyclopentadienyl platinum [MeCpPt(Me)3]. We use a cantilever-based deflection technique to determine the sensitivity (gauge factor) of the sensor element. We find that its sensitivity depends on the electrical conductivity and can be continuously tuned, either by the thickness of the deposit or by electron-beam irradiation leading to a distinct maximum in the sensitivity. This maximum finds a theoretical rationale in recent advances in the understanding of electronic charge transport in nano-granular metals.
We have developed a versatile software package for the simulation of di-electron production in pp and dp collisions at moderate beam kinetic energies (1-2GeV). Particular attention has been paid to incorporate different descriptions of the Dalitz decay Δ rightarrow Ne + e - via a common interface. In addition, suitable parameterizations for the virtual bremsstrahlung process NN rightarrow NNe + e - based on one-boson exchange models have been implemented. Such simulation tools with high flexibility of the framework are important for the interpretation of the di-electron data taken with the HADES spectrometer and demonstrates the wide applicability within the field of nuclear and hadronic physics.
Im Rahmen der vorliegenden Diplomarbeit wurden die bei den Kalttests der supraleitenden 360 MHz CH-Prototypkavität gewonnenen Messergebnisse sowie das Prinzip der Hochfrequenzmessung an supraleitenden Resonatoren vorgestellt. Zudem wurde bei dem Aufbau eines eigens für diese Messungen optimierten horizontalen Kryostaten mitgearbeitet. Die wesentlichen Elemente des Kryostaten wurden dargestellt und das Kaltfahren des gesamten Kryosystems erläutert. Das am IAP erarbeitete Tuningkonzept, bei dem ein langsamer, kettenbetriebener Tuner für den Ausgleich statischer Frequenzänderungen und zusätzlich drei Piezotuner zur Kompensation schneller Frequenzschwankungen eingesetzt werden, konnte aufgrund der zu groÿen Schwankungen der Resonanzfrequenz, die durch die stetige Befüllung des Kryostaten mit Helium hervorgerufen wurde, nur bedingt getestet werden. Dennoch konnte gezeigt werden, dass der Piezotuner die Frequenz der Kavität für kurze Zeit konstant hält und der langsame, mechanische Tuner einen Frequenzhub von 400 kHz erreichen kann. Für weitere Kalttests der CH-Struktur im horizontalen Kryostaten werden zur Zeit sowohl das Regelsystem für die schnellen Piezotuner als auch die Motorsteuerung des mechanischen Tuners optimiert.
In einem weiteren Arbeitsschritt wurden mit Hilfe der Simulationssoftware ANSYS Rechnungen zur Geometrieoptimierung des neuen dynamischen Balguners für zukünftige supraleitende CH-Strukturen durchgeführt. Das Hauptaugenmerk der Optimierung lag hierbei auf der Reduktion der auftretenden Materialspannungen bei einem vorgesehenen Hub von ca. ± mm, der durch eine äuÿere Belastung hervorgerufen wird. Dabei wurden verschiedene geometrische Gröÿen variiert und die optimalen Parameter gefunden. Zudem wurde eine Modalanalyse durchgeführt, um zu verhindern, dass die mechanischen Eigenfrequenzen des Balgtuners in den Betriebsbereich des Piezotuners, der letztlich für den Antrieb der dynamischen Balgtuner vorgesehen ist, fallen. Die nach sämtlichen Simulationsschritten berechnete und final vorgesehene Tunergeometrie und deren Parameter, die bezüglich des auftretenden von-Mises-Stresses optimiert wurden, sind in Abbildung bzw. Tabelle 9.1 dargestellt.
Desweiteren wurden mit Hilfe des Simulationsprogramms CST MicroWave Studio Untersuchungen zu Multipacting durchgeführt. Aufgrund der problematischen Spannungswerte im oberen Gap des Tuners müssen in weiteren Arbeitsschritten zusätzliche Simulationsrechnungen durchgeführt werden, um die Gefahr von Multipacting zu verhindern. Um die strukturmechanischen Simulationsergebnisse und deren Genauigkeit zu validieren, wurde zu Testzwecken ein Balgtunerprototyp bestehend aus eineinhalb Zellen von der Firma RI in Bergisch Gladbach gefertigt. Messungen der maximalen Auslenkung zeigten zwischen simulierten und gemessenen Werten eine Diskrepanz von einem Faktor von ungefähr 3.
Für weitere Testzwecke soll ein weiterer Balgtunerprototyp bestehend aus 6 Zellen nach den simulierten Parametern angefertigt und später sowohl bei Raumtemperatur als auch unter kryogenen Bedingungen auf dessen Auslenkung getestet werden.
This thesis presents the implementation of the online reconstruction, calibration and monitoring of the data of the Transition Radiation Detector of ALICE. This reconstruction is performed on the High Level Trigger, the third level of the ALICE trigger system, and enables online calibration and monitoring of the incoming data. Additionally, the HLT can steer the data storage, such that only physical interesting events are saved. The online reconstruction, as well as the calibration, makes use of the existing offline algorithms. Therefore, interfaces between the HLT and these offline algorithms were implemented. For being able to reach the speed of 2000 Hz in proton-proton collisions, and 200 Hz in leadlead collisions, the algorithms had to be accelerated. Bottlenecks were tracked down using dedicated tools, and respective code was either reimplemented or it is being skipped during the online reconstruction. The quality of the output data was monitored throughout the implementation, to assure that it is not being cut too much.
The TATA Box Binding Protein (TBP) is a 20 kD protein that is essential and universally conserved in eucarya and archaea. Especially among archaea, organisms can be found that live below 0°C as well as organisms that grow above 100°C. The archaeal TBPs show a high sequence identity and a similar structure consisting of α-helices and β-sheets that are arranged in a saddle-shape 2-symmetric fold. In previous studies, we have characterized the thermal stability of thermophilic and mesophilic archaeal TBPs by infrared spectroscopy and showed the correlation between the transition temperature (Tm) and the optimal growth temperature (OGT) of the respective donor organism. In this study, a “new” mutant TBP has been constructed, produced, purified and analyzed for a deeper understanding of the molecular mechanisms of thermoadaptation. The β-sheet part of the mutant consists of the TBP from Methanothermobacter thermoautotrophicus (OGT 65°C, MtTBP65) whose α-helices have been exchanged by those of Methanosarcina mazei (OGT 37°C, MmTBP37). The Hybrid-TBP irreversibly aggregates after thermal unfolding just like MmTBP37 and MtTBP65, but the Tm lies between that of MmTBP37 and MtTBP65 indicating that the interaction between the α-helical and β-sheet part of the TBP is crucial for the thermal stability. The temperature stability is probably encoded in the variable α-helices that interact with the highly conserved and DNA binding β-sheets.
Die vorliegende Arbeit beschäftigt sich mit der Entwicklung und dem Aufbau eines IHBeschleunigers zur Beschleunigung schwerer Ionen am Brookhaven National Laboratory.
Es wurde eine Einführung in die Arbeit und die Experimente des BNL gegeben, um zu verstehen, welche Aufgabe die IH in Zukunft haben wird und wie diese das BNL in den experimentellen Möglichkeiten erweitert.
Eingebettet in den historischen Kontext wurde zu Beginn die Familie der H-Moden Beschleuniger und ganz besonders die IH erläutert. Wichtige Begriffe und charakteristische Größen, die zum Verständnis der vorliegenden Arbeit nötig sind, wurden eingeführt und deren anschauliche Bedeutung bei der Entwicklung von Beschleunigern klar gemacht.
Eine Neuerung bei der Entwicklung von Driftröhrenbeschleunigern stellt der aufgebaute Messstand und die Computergestützte Datenanalyse dar. Es konnte gezeigt werden, dass die vorgestellte Methodik zur Verarbeitung der Messdaten enorme Verbesserungen mit sich bringt. Daten von unterschiedlichsten Beschleunigern könnern schneller als zuvor analysiert und direkt mit den Sollwerten der Strahldynamik verglichen werden. So kann bereits vor Ort eine mit nur geringen Fehlern behaftete Auswertung erstellt werden und direkt in die weitere Arbeit an einem Beschleuniger mit einfließen.
Die neue Technik wurde im weiteren Verlauf der Arbeit genutzt, um die im Detail eingeführte BNL IH Struktur aufzubauen und für den Einsatz in den USA fertig zu stellen. Neben den exakt auszuführenden Aufbau- und Justierarbeiten wurde viel Zeit in die Erstellung eines ausgereiften Tuningkonzepts investiert. Während dieser Arbeiten wurden die zwar theoretisch bekannten, am Institut aber noch nie nachgewiesenen, parasitären Tunerresonanzen beobachtet. Der zerstörerische Effekt einer solchen Resonanz konnte erstmals gemessen und analysiert werden.
Trotz der üblichen kleineren Schwierigkeiten, die komplexe Projekte mit sich bringen wurde die IH Struktur noch vor Beendigung dieser Arbeit in den USA am BNL aufgestellt und getestet. Es wurde noch nicht die volle Leistung erreicht, aber der Konditionierungsprozess ist in vollem Gange und die vorläufigen Ergebnisse zeigen keine Probleme auf, so dass davon auszugehen ist, dass die IH noch dieses Jahr voll eingesetzt werden kann.
Abschließend kann man sagen, dass das Projekt erfolgreich realisiert wurde und das die Neuerungen aus dieser Arbeit Einzug in weitere Projekte finden werden.