Refine
Year of publication
- 2009 (158) (remove)
Document Type
- Article (81)
- Doctoral Thesis (69)
- Book (5)
- Report (3)
Has Fulltext
- yes (158)
Is part of the Bibliography
- no (158) (remove)
Keywords
- Gentherapie (3)
- ADC (2)
- Biochemie (2)
- Crystallography (2)
- HIV (2)
- Kraftmikroskopie (2)
- Licht-Sammel-Komplex (2)
- Ligand <Biochemie> (2)
- Membranproteine (2)
- Quantenchemie (2)
Institute
- Biochemie und Chemie (158) (remove)
The title compound, C20H22O2, crystallizes with two independent molecules in the asymmetric unit. In each molecule, all the non-H atoms lie in a common plane (r.m.s. deviations of 0.098 and 0.079 Å). There is a [pi]-[pi] stacking interaction in the crystal structure. The central aromatic rings of the two molecules, which are stacked head-to-tail one above the other, are separated by centroid-to-centroid distances of 3.872 (13) and 3.999 (10) Å. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 A° ; R factor = 0.044; wR factor = 0.101; data-to-parameter ratio = 14.6.
The title compound, C14H20O3, is a synthetic analogue with a long aliphatic side chain of the important food additive and flavoring agent, vanillin. There are two independent molecules in the asymmetric unit, each having an essentially planar conformation (r.m.s. deviations of 0.023 and 0.051Å for all non-H atoms of the two molecules in the asymmetric unit). Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A°; R factor = 0.049; wR factor = 0.144; data-to-parameter ratio = 15.9.
Specific functions of biological systems often require conformational transitions of macromolecules. Thus, being able to describe and predict conformational changes of biological macromolecules is not only important for understanding their impact on biological function, but will also have implications for the modelling of (macro)molecular complex formation and in structure-based drug design approaches. The “conformational selection model” provides the foundation for computational investigations of conformational fluctuations of the unbound protein state. These fluctuations may reveal conformational states adopted by the bound proteins. The aim of this work is to incorporate directional information in a geometry-based approach, in order to sample biologically relevant conformational space extensively. Interestingly, coarse-grained normal mode (CGNM) approaches, e.g., the elastic network model (ENM) and rigid cluster normal mode analysis (RCNMA), have emerged recently and provide directions of intrinsic motions in terms of harmonic modes (also called normal modes). In my previous work and in other studies it has been shown that conformational changes upon ligand binding occur along a few low-energy modes of unbound proteins and can be efficiently calculated by CGNM approaches. In order to explore the validity and the applicability of CGNM approaches, a large-scale comparison of essential dynamics (ED) modes from molecular dynamics (MD) simulations and normal modes from CGNM was performed over a dataset of 335 proteins. Despite high coarse-graining, low frequency normal modes from CGNM correlate very well with ED modes in terms of directions of motions (average maximal overlap is 0.65) and relative amplitudes of motions (average maximal overlap is 0.73). In order to exploit the potential of CGNM approaches, I have developed a three-step approach for efficient exploration of intrinsic motions of proteins. The first two steps are based on recent developments in rigidity and elastic network theory. Initially, static properties of the protein are determined by decomposing the protein into rigid clusters using the graph-theoretical approach FIRST at an all-atom representation of the protein. In a second step, dynamic properties of the molecule are revealed by the rotations-translations of blocks approach (RTB) using an elastic network model representation of the coarse-grained protein. In the final step, the recently introduced idea of constrained geometric simulations of diffusive motions in proteins is extended for efficient sampling of conformational space. Here, the low-energy (frequency) normal modes provided by the RCNMA approach are used to guide the backbone motions. The NMSim approach was validated on hen egg white lysozyme by comparing it to previously mentioned simulation methods in terms of residue fluctuations, conformational space explorations, essential dynamics, sampling of side-chain rotamers, and structural quality. Residue fluctuations in NMSim generated ensemble is found to be in good agreement with MD fluctuations with a correlation coefficient of around 0.79. A comparison of different geometry-based simulation approaches shows that FRODA is restricted in sampling the backbone conformational space. CONCOORD is restricted in sampling the side-chain conformational space. NMSim sufficiently samples both the backbone and the side-chain conformations taking experimental structures and conformations from the state of the art MD simulation as reference. The NMSim approach is also applied to a dataset of proteins where conformational changes have been observed experimentally, either in domain or functionally important loop regions. The NMSim simulations starting from the unbound structures are able to reach conformations similar to ligand bound conformations (RMSD < 2.4 Å) in 4 out of 5 cases of domain moving proteins. In these four cases, good correlation coefficients (R > 0.7) between the RMS fluctuations derived from NMSim generated structures and two experimental structures are observed. Furthermore, intrinsic fluctuations in NMSim simulation correlate with the region of loop conformational changes observed upon ligand binding in 2 out of 3 cases. The NMSim generated pathway of conformational change from the unbound structure to the ligand bound structure of adenylate kinase is validated by a comparison to experimental structures reflecting different states of the pathway as proposed by previous studies. Interestingly, the generated pathway confirms that the LID domain closure precedes the closing of the NMPbind domain, even if no target conformation is provided in NMSim. Hence, the results in this study show that, incorporating directional information in the geometry-based approach NMSim improves the sampling of biologically relevant conformational space and provides a computationally efficient alternative to state of the art MD simulations.
Modelling protein flexibility and plasticity is computationally challenging but important for understanding the function of biological systems. Furthermore, it has great implications for the prediction of (macro) molecular complex formation. Recently, coarse-grained normal mode approaches have emerged as efficient alternatives for investigating large-scale conformational changes for which more accurate methods like MD simulation are limited due to their computational burden. We have developed a Normal Mode based Simulation (NMSim) approach for efficient conformation generation of macromolecules. Combinations of low energy normal modes are used to guide a simulation pathway, whereas an efficient constraints correction approach is applied to generate stereochemically allowed conformations. Non-covalent bonds like hydrogen bonds and hydrophobic tethers and phi-psi favourable regions are also modelled as constraints. Conformations from our approach were compared with a 10 ns MD trajectory of lysozyme. A 2-D RMSD plot shows a good overlap of conformational space, and rms fluctuations of residues show a correlation coefficient of 0.78 between the two sets of conformations. Furthermore, a comparison of NMSim simulations starting from apo structures of different proteins show that ligand-bound conformations can be sampled for those cases where conformational changes are mainly correlated, e.g., domain-like motion in adenylate kinase. Efforts are currently being made to also model localized but functionally important motions for protein binding pockets and protein-protein interfaces using relevant normal mode selection criteria and implicit rotamer basin creation.
4-(4-Nitrophenoxy)biphenyl
(2009)
The two phenyl rings of the biphenyl unit of the title compound, C18H13NO3, are almost coplanar [dihedral angle 6.70 (9)°]. The nitrophenyl ring, on the other hand, is significantly twisted out of the plane of the these two rings, making dihedral angles of 68.83 (4)° with the middle ring and 62.86 (4)° with the end ring. The nitro group is twisted by 12.1 (2)° out of the plane of the phenyl ring to which it is attached. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A° ; R factor = 0.040; wR factor = 0.118; data-to-parameter ratio = 12.8.
CITIES (Chemistry and Industry for Teachers in European Schools) ist ein COMENIUS- Projekt, in dessen Rahmen Materialien für den Chemieunterricht erstellt und erprobt werden. Diese Materialien sollen Lehrkräften helfen, ihren Unterricht attraktiver zu gestalten, indem der Bezug sowohl zum Alltag und der Lebenswelt als auch zur chemischen Industrie aufgezeigt wird. Die Diskussion um eine gute Ernährung sowie empfehlenswerte und weniger empfehlenswerte Lebensmittel ist für Schülerinnen und Schüler ein weiteres interessantes Thema, das deshalb oft im Chemieunterricht im Zusammenhang mit den Themen Kohlenhydrate, Fette und Eiweiße behandelt wird. In dem für CITIES ausgewählten Beispiel wird eine ungewöhnliche Sichtweise eingenomen: Ausgangspunkt ist eine Dose mit Ravioli. Es wird nun der Frage nachgegangen, welche Funktion die Konservendose für die Konservierung der Lebensmittel hat und es werden Inhaltsstoffe der Ravioli und der Soße nachgewiesen. Insgesamt eignen sich die Thematik und die Herangehensweise für die Erarbeitung einer großen Spanne von Themenbereichen, die von der Korrosion als bis zu unterschiedlichen Nachweisen für Zucker bzw. Kohlenhydraten reichen. Aber die Chemie rund um die Raviolidose kann auch zur Wiederholung und Vertiefung von vorab erarbeiteten Inhalten etwa am Ende eines Schuljahres eingesetzt werden. Für diesen Themenbereich wurden unterschiedliche Materialien entwickelt: 1. Eine kurze Einführung gibt eine Übersicht über die gesamte Thematik. Hier werden auch historische Aspekte der Lebensmittelkonservierung angesprochen. 2. Experimente zum Thema finden sich in einer separaten Versuchssammlung. Überwiegend handelt es sich dabei um Schülerversuche, die einfach durchgeführt werden können. Die Theorie zu den einzelnen Experimenten wird jeweils kurz aufgeführt. 3. Die Möglichkeit der Umsetzung im Unterricht wird in einem drittel Teil exemplarisch dargestellt. s.a. URN: urn:nbn:de:hebis:30-86517 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/8651/
Forensische Chemie - mit Chemie auf Verbrecherjagd : eine Einführung für den Chemieunterricht
(2009)
CITIES (Chemistry and Industry for Teachers in European Schools) ist ein COMENIUS-Projekt, in dessen Rahmen Materialien für den Chemieunterricht erstellt und erprobt werden. Diese Materialien sollen Lehrkräften helfen, ihren Unterricht attraktiver zu gestalten, indem der Bezug sowohl zum Alltag und der Lebenswelt als auch zur chemischen Industrie aufgezeigt wird. Forensische Chemie Aber was kann Schülerinnen und Schüler faszinieren? Nicht nur Erwachsene, auch Heranwachsende lösen gerne Rätsel, besonders wenn es sich um die Aufklärung von Kriminalfällen handelt. Nicht umsonst spielen Kriminalromane sowie Filme und Fernsehsendungen, die sich mit solchen Themen beschäftigen, eine große Rolle in der Unterhaltungsindustrie. Das angesprochene Interesse kann genutzt werden: Bei der Sicherung und dem Nachweis von Spuren werden häufig chemische Verfahren eingesetzt, von denen eine ganze Reihe einfach auch im Schulexperiment nachvollzogen werden kann. Es war deshalb naheliegend, die Forensische Chemie als einen Themenschwerpunkt des Moduls zu wählen. Folgende Materialien wurden zusammengestellt: 1. Eine Einführung in die Forensische Chemie dient zur Vorbereitung des Unterrichts und führt in eine Auswahl von Methoden der Spurensicherung und des Spurennachweises ein. 2. Eine Sammlung von einfachen Versuchen zur Forensischen Chemie vermittelt einen praktischen Zugang zu diesem Thema mit einfachen Mitteln. 3. Die Darstellung eines Kriminalfalles, zu dessen Lösung chemisches Wissen eine große Rolle spielt, eröffnet die Möglichkeit, auf spannende Weise Inhalte zu wiederholen und zu vertiefen. s.a. URN: urn:nbn:de:hebis:30-86529 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/8652/ 4. In einem weiteren Beispiele wird die Methode des Gruppenpuzzles eingesetzt. Auch hier müssen die Schülerinnen und Schüler einen Kriminalfall lösen, wobei unterschiedliche Methoden, Fingerabdrücke sichtbar zu machen, sowie Gipsabdrücke, ein Blutnachweis und - theoretisch - die Elektrophorese zum Einsatz kommen. s.a. URN: urn:nbn:de:hebis:30-86539 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/8653/ 5. Eine kurze Einführung in die Forensische Chemie wird zusätzlich in Form eines Lernprogramms angeboten. Das Lernprogramm „Forensische Chemie - Mit Chemie auf Verbrecherjagd" fasst die wichtigsten Inhalte des Unterrichtmaterials zu 1. - 4. kurz und seitenorientiert zusammen. Das Programm bietet Ihnen neben einer individuellen und nutzerzentrierten Navigation über das angezeigte Pfeilkreuz die Möglichkeit, zwischendurch immer wieder Ihr Wissen zu überprüfen. Die Inhalte werden in jedem gängigen WebBrowser angezeigt. http://cities.eu.org/lernbar/index.htm Die unter den Punkten 1 und 2 aufgeführten Materialien können die Grundlage für einen längeren Kurs sein, oder es können einzelne Aspekte im Zusammenhang mit anderen Themen des Chemieunterrichts erarbeitet werden. Ein Beispiel ist die Verwendung von Cyanacrylat zum Nachweis von Fingerabdrücken. Dieser Inhalt lässt sich sowohl im größeren Zusammenhang der Forensischen Chemie behandeln als auch im Rahmen der Chemie der Kunststoffe.
Acute myeloid leukemia (AML) is a hematopoietic cell disorder characterized by a block in differentiation and increased proliferation and survival of malignant blasts. Expansion of the malignant cell clone effects the normal production of blood cells and – if left untreated – leads to death. Receptor tyrosine kinases (RTKs) play an important role in the pathogenesis of AML, as they are either often mutated or overexpressed. In normal hematopoiesis, RTK signal termination is tightly controlled, and involves ubiquitination, internalization, endocytosis and degradation. Cbl proteins are E3 ligases and have been shown to ubiquitinate several activated RTKs, including Flt3 and Kit, targeting them for degradation. Recently, several Cbl mutations have been identified: Cbl-R420Q was identified in an AML patient and Cbl-70Z was identified in a mouse lymphoma model. In this thesis work, the role of these Cbl mutants in Kit signaling and in a mouse transplantation model was studied. Cbl mutants (Cbl-R420Q, Cbl-70Z) have the ability to transform the myeloid 32D cell line in cooperation with Kit WT. Cbl mutants along with Kit promoted interleukin-3 (IL3)-independent proliferation and enhanced the cell survival of 32D cells. In contrast, expression of the Cbl mutants alone did not confer IL3-independent growth. Stem cell factor (SCF, the Kit ligand) dependent growth was enhanced in the presence of Cbl mutants and Cbl mutants promoted colonogenic growth in the presence of Kit. Furthermore, Cbl mutants inhibited the ubiquitination of the activated Kit receptor. In addition, Cbl mutants inhibited the endocytosis of the activated Kit receptor. Retroviral expression of Cbl mutants in transplanted bone marrow induced a generalized mastocytosis, a myeloproliferative disease and, in rare care cases, myeloid leukemia. Splenomegaly was observed in the presence of Cbl mutants. Furthermore, mast cells with variable range of infiltration were noticed in all the vital organs (spleen, liver, bone marrow, lung, kidney, heart) of Cbl (mutant) transplanted mice. Almost all recipients of bone marrow cells transduced with Cbl mutants developed a lethal hematologic disorder with a mean latency of 341 days in the Cbl-R420Q group and 395 days in the Cbl-70Z group. This is the first published report on a hematological disease with Cbl mutants in a mouse model. Co-immunoprecipitation studies indicated that Cbl-70Z binds to Kit, even in the absence of Kit ligand. Cbl-R420Q also bound to Kit in the absence of SCF, albeit to a lesser extent. Association of Cbl mutants to Kit was enhanced in the presence of SCF. Signaling studies demonstrated the constitutive activation of Akt and Erk in the presence of Cbl mutants and Kit. In addition, Cbl mutants enhanced the SCF-dependent Kit, Akt and Erk activation. Cbl-70Z, in association with kinase-dead Kit (Kit-KD) or kinase-dead Flt3 (Flt3-KD), conferred IL3-independent growth and survival to the myeloid 32D cell line. Cbl-R420Q provided only a slight growth advantage in the presence of Kit-KD. As demonstrated by pharmacological inhibition studies, Akt activation was necessary for the transformation mediated by Cbl-70Z and Kit-KD / Flt3-KD. Cbl mutants enhanced the Src family kinases (SFKs) activity. The pharmacological inhibition of SFK activity inhibited the proliferation and colonogenic growth. Interaction was found between Cbl-70Z, SFKs and Kit-KD. The SFK member Fyn was identified to bind to Cbl. In addition, kinase activity of SFKs was necessary for binding to Cbl, since SFKs inhibition by PP-2 abolished the binding between the complex-binding partners. Dasatinib and PP-2, both SFK inhibitors, inhibited the Cbl and Akt phosphorylation indicating that Fyn acts upstream of Akt. Inhibition of Kit with imatinib reduced the proliferation of cells overexpressing Kit WT and Cbl-70Z much stronger compared with cells expressing Kit-KD and Cbl-70Z, but much less than the dual KIT/SFK inhibitor dasatinib. This indicated that Kit kinase activity was required but not essential. The data presented in this thesis work implies that both RTK and SFK inhibition may have to be targeted, in order to effectively prevent transformation. In summary, the present thesis work indicates an important role of Cbl, Kit and SFKs in myeloid transformation and deregulated signal transduction.
The light-harvesting complex of photosystem II (LHC-II) is the major antenna complex in plant photosynthesis. It accounts for roughly 30% of the total protein in plant chloroplasts, which makes it arguably the most abundant membrane protein on Earth, and binds about half of plant chlorophyll (Chl). The complex assembles as a trimer in the thylakoid membrane and binds a total of 54 pigment molecules, including 24 Chl a, 18 Chl b, 6 lutein (Lut), 3 neoxanthin (Neo) and 3 violaxanthin (Vio). LHC-II has five key roles in plant photosynthesis. It: (1) harvests sunlight and transmits excitation energy to the reaction centres of photosystems II and I, (2) regulates the amount of excitation energy reaching each of the two photosystems, (3) has a structural role in the architecture of the photosynthetic supercomplexes, (4) contributes to the tight appression of thylakoid membranes in chloroplast grana, and (5) protects the photosynthetic apparatus from photo damage by non photochemical quenching (NPQ). A major fraction of NPQ is accounted for its energy-dependent component qE. Despite being critical for plant survival and having been studied for decades, the exact details of how excess absorbed light energy is dissipated under qE conditions remain enigmatic. Today it is accepted that qE is regulated by the magnitude of the pH gradient (ΔpH) across the thylakoid membrane. It is also well documented that the drop in pH in the thylakoid lumen during high-light conditions activates the enzyme violaxanthin de-epoxidase (VDE), which converts the carotenoid Vio into zeaxanthin (Zea) as part of the xanthophyll cycle. Additionally, studies with Arabidopsis mutants revealed that the photosystem II subunit PsbS is necessary for qE. How these physiological responses switch LHC-II from the active, energy transmitting to the quenched, energy-dissipating state, in which the solar energy is not transmitted to the photosystems but instead dissipated as heat, remains unclear and is the subject of this thesis. From the results obtained during this doctoral work, five main conclusions can be drawn concerning the mechanism of qE: 1. Substitution of Vio by Zea in LHC-II is not sufficient for efficient dissipation of excess excitation energy. 2. Aggregation quenching of LHC-II does not require Vio, Neo nor a specific Chl pair. 3. With one exception, the pigment structure in LHC-II is rigid. 4. The two X-ray structures of LHC-II show the same energy transmitting state of the complex. 5. Crystalline LHC-II resembles the complex in the thylakoid membrane. Models of the aggregation quenching mechanism in vitro and the qE mechanism in vivo are presented as a corollary of this doctoral work. LHC-II aggregation quenching in vitro is attributed to the formation of energy sinks on the periphery of LHC-II through random interaction with other trimers, free pigments or impurities. A similar but unrelated process is proposed to occur in the thylakoid membrane, by which excess excitation energy is dissipated upon specific interaction between LHC-II and a PsbS monomer carrying Zea. At the end of this thesis, an innovative experimental model for the analysis of all key aspects of qE is proposed in order to finally solve the qE enigma, one of the last unresolved problems in photosynthesis research.
The six-membered ring of the title compound, C11H16NO, has a distorted envelope conformation. The piperidine N atom deviates by 0.128 (1) Å from the plane through its three neighbouring atoms. In the crystal structure, molecules are connected by intermolecular Cethynyl-H...O contacts to form chains extending in the [10\overline{1}] direction. Key indicators: single-crystal X-ray study; T = 167 K; mean σ(C–C) = 0.001 Å ; R factor = 0.040; wR factor = 0.112; data-to-parameter ratio = 27.3.
A generic drug product (World Health Organization (WHO) terminology: multisource product) is usually marketed and manufactured after the expiry date of the innovator’s patent. Generic drugs are less expensive than the innovator products because generic manufacturers do not have to amortize the investment costs of research, development, marketing, and promotion. Multisource products must contain the same active pharmaceutical ingredients (APIs) as the original formulation and have to be shown to be interchangeable with the original formulation. Multisource products have to be shown bioequivalent to the innovator counterpart with respect to pharmacokinetic and pharmacodynamic properties. Multisource products are therefore identical in dose, strength, route of administration, safety, efficacy, and intended use. Bioequivalence can be demonstrated by in vitro dissolution, pharmacokinetic, pharmacodynamic or clinical studies. Since 2000, the U.S. Food and Drug Administration (FDA) allows the approval of certain multisource products solely on the basis of in vitro studies, i.e. by waiving in vivo studies in humans (“Biowaiver”), based on the Biopharmaceutics Classification Scheme (BCS). The BCS characterizes APIs by their solubility and permeability in the gastrointestinal tract (GIT). The different BCS Classes I-IV (Class I: high solubility, high permeability; Class II: low solubility, high permeability; Class III: high solubility, low permeability and Class IV: low solubility, low permeability) result from all possible combinations of high and low solubility with high and low permeability. Since the adoption of the BCS by the FDA in 1995, the BCS criteria have been under continuous development. In 2006, the WHO has released the most recent bioequivalence guidance including relaxed criteria for bioequivalence studies based on modified BCS criteria. According to this guidance, APIs belonging to the BCS classes I – and under defined conditions - II and III – are eligible for a biowaiver-based approval. The principal objective of this work was to characterize the first-line anti tuberculosis APIs, isoniazid, pyrazinamide, ethambutol dihydrochloride and rifampicin, according to their physicochemical, biopharmaceutical, pharmacokinetic and pharmacological properties and to classify them according to the BCS. Ethambutol dihydrochloride and isoniazid were classified as borderline BCS class I/III APIs. Pyrazinamide was classified as a BCS class III and rifampicin as a BCS class II API. Based on the BCS classification and the additional criteria defined in the WHO bioequivalence guidance, the possibility of biowaiver-based approval for immediate release (immediate release) solid oral dosage forms containing the first-line antituberculosis drugs was evaluated. A biowaiver-based approval with defined constraints was recommended for immediate release solid oral dosage forms containing isoniazid (interaction with reducing sugars), pyrazinamide and ethambutol dihydrochloride (relative narrow therapeutic index). Rifampicin was classified as a BCS class II API, and it was concluded that rifampicin containing solid oral immediate release drug products as well as Scale-Up and Post-Approval Changes (SUPAC) changes should not be approved by a biowaiver on the following basis: (i) its solubility and dissolution are highly variable due to polymorphism and instability, (ii) concomitant intake of food and antacids reduces its absorption and bioavailability, (iii) no in vitro predictive dissolution test has been found which correlates to in vivo absorption and (iv) several publications reporting cases of non-bioequivalent and bioinequivalent rifampicin products have been located in the literature. Thus, it is recommended that bioequivalence of rifampicin containing solid oral immediate release drug products should be established by in vivo pharmacokinetic studies in humans. This risk-benefit benefit assessment of a biowaiver-based approval was presented as a poster at the American Association of Pharmaceutical Scientists (AAPS) 2005 and subsequently published as “Biowaiver Monographs” in the Journal of Pharmaceutical Sciences. Based on the assessment of the dissolution properties of the antituberculosis drugs for a biowaiver approval, quality control dissolution methodologies for the International Pharmacopoeia (Pharm. Int.) were developed, presented at the WHO expert meeting and adopted in the Pharm. Int. (http://www.who.int/medicines/publications/pharmprep/OMS_TRS_948.pdf). Additionally, preliminary biowaiver recommendations were also developed for four firstline antimalarial drugs listed on the WHO Essential Medicines List (EML): Quinine, as both the hydrochloride and sulphate, and proguanil hydrochloride were classified as borderline BCS class I/III APIs. Since quinine is a narrow therapeutic index drug and many cases of non-bioequivalence have been reported in the literature, a biowaiverbased approval was not recommended. For solid oral immediate release dosage forms containing proguanil a biowaiver-based approval was recommended under the condition that they dissolve very rapidly. Primaquine phosphate was classified as a BCS class I API. Therefore, a biowaiver-based approval was recommended for immediate release solid oral dosage forms containing primaquine phosphate. Mefloquine hydrochloride was classified as a basic, BCS class IV/II API, making it ineligible for the biowaiver. Additionally, reports of non-bioequivalence and a narrow therapeutic index were found in the scientific literature. Consequently, bioequivalence of solid oral immediate release dosage forms containing mefloquine hydrochloride should be established by in vivo pharmacokinetic studies. The results for quinine hydrochloride and sulphate, proguanil hydrochloride, primaquine diphosphate and mefloquine hydrochloride were presented as a poster at the Pharmaceutical Sciences World Congress (PSWC) 2007 and published as a WHO Collaborating Center Report in June 2006. The aim of this project was to collect, evaluate, generate and publish relevant information for a biowaiver-based approval of essential medicines in order to provide a summary to local regulatory authorities. This information complements the selected list of essential medicines by providing information about the biopharmaceutical properties and pharmaceutical quality of solid oral immediate release dosage forms containing these APIs. The aim of the biowaiver project, inspired by the WHO and brought in life by the International Pharmaceutical Federation (FIP), is to enable access to essential medicines in standardized quality at an affordable price. In this work, a significant contribution to this aim in the form of four biowaiver monographs for the antituberculosis drugs and several reports on the antimalarials has been achieved.
P2X receptors represent the third superfamily of ligand gated ion channels with ATP as their natural ligand. Most of the mammalian P2X receptors are non-selective cation channels, which upon activation, mediate membrane depolarization and have physiological roles ranging from fast excitatory synaptic transmission, modulation of pain-sensation, LTP to apoptosis etc. In spite of them being an attractive drug target, their potential as a drug target is limited by the lack of basic understanding of the structure-function relationship of these receptors. In my thesis, I have investigated the behavior of homomeric P2X receptor subunits with the help of photolabeling and fluorescence techniques coupled to electrophysiological measurements using Xenopus laevis oocytes heterologous expression system. Concurrent photolabeling by BzATP and current recordings from the same set of receptors in real time has revealed that the gating process in homomeric P2X receptors is contributed individually by each subunit in an additive manner. Our study for the first time describes the agonist potency of Alexa-ATP (a fluorescent ATP analog) on P2X1 receptors. The use of Alexa-ATP in our experiments elucidated that receptor subunits are not independent but interacting with each other in a cooperative manner. The type of cooperativity, however, depended on the type and concentrations of allosteric/competing ligands. Based on our results, in my thesis we propose an allosteric model for ligand-receptor interactions in P2X receptors. When simulated, the model could replicate our experimental findings thus, further validating our model. Further, correlation between occupancy of P2X1 receptors (determined using binding curve for Alexa-ATP) with the steady-state desensitization suggests that binding of three agonist molecules per receptor are required to desensitize P2X1 receptors. We further extended the approach of fluorescence with electrophysiological measurement to assign the role for different domains in P2X1 receptors with the help of environmental sensitive, cysteine reactive fluorophore (TMRM). Cysteine rich domain-1 of P2X1 receptors (C117-C165) was found to be involved in structural rearrangements after agonist and antagonist binding. In contrast to the present understanding, that the binding of an antagonist cannot induce desensitization in P2X1 receptors and the receptors need to open first before undergoing desensitization, we propose based on our results that a competitive antagonist can also induce desensitization in P2X1 receptors by bypassing the open state. We have attempted to answer few intriguing questions in the field of P2X receptor research and we think that our answers provide many avenues to the basic understanding of functioning of P2X receptors.
The title compound, C14H11NO4, crystallizes with two molecules in the asymmetric unit. The major conformational difference between these two molecules is the dihedral angle between the aromatic rings, namely 36.99 (5) and 55.04 (5)°. The nitro groups are coplanar with the phenyl rings to which they are attached, the O—N—C—C torsion angles being -1.9 (3) and 1.0 (3)° in the two molecules.
By adopting a variety of shapes, proteins can perform a wide number of functions in the cell, from being structural elements or enabling communication with the environment to performing complex enzymatic reactions needed to sustain metabolism. The number of proteins in the cell is limited by the number of genes encoding them. However, several mechanisms exist to increase the overall number of protein functions. One of them are post-translational modifications, i.e. covalent attachment of various molecules onto proteins. Ubiquitin was the first protein to be found to modify other proteins, and, faithful to its evocative name, it is involved in nearly all the activities of a cell. Ubiquitylation of proteins was believed for a long time only to be responsible for proteasomal degradation of modified proteins. However, with the discovery of various types of ubiquitylation, such as mono-, multiple- or poly-ubiquitylation, new functions of this post-translational modification emerged. Mono-ubiquitylation has been implicated in endocytosis, chromatin remodelling and DNA repair, while poly-ubiquitylation influences the half-life of proteins or modulates signal transduction pathways. DNA damage repair and tolerance are example of pathways extensively regulated by ubiquitylation. PCNA, a protein involved in nearly all types of DNA transaction, can undergo both mono- and poly-ubiquitylation. These modifications are believed to change the spectrum of proteins that interact with PCNA. Monoubiquitylation of PCNA is induced by stalling of replication forks when replicative polymerases (pols) encounter an obstacle, such as DNA damage or tight DNA-protein complexes. It is believed that monoubiquitylation of PCNA stimulates the exchange between replicative pols to one of polymerases that can synthesize DNA across various lesions, a mechanism of damage tolerance known as translesion synthesis (TLS). Our work has helped to understand why monoubiqutylation of PCNA favours this polymerase switch. We have identified two novel domains with the ability to bind Ub non-covalently. These domains are present in all the members of Y polymerases performing TLS, and were named Ub-binding zinc finger (UBZ) (in polη and polκ) and Ub-binding motif (UBM) (in polι and Rev1). We have shown that these domains enable Y polymerases to preferentially gain access to PCNA upon stalling of replication, when the action of translesion polymerases is required. While the region of direct interaction between Y pols and PCNA had been known (BRCT domain in Rev1 and PIP box motif (PIP) in three others members), we propose that Ub-binding domains (UBDs) in translesion Y pols enhance the PIP- or BRCT-domain-mediated interaction between these polymerases and PCNA by binding to the Ub moiety attached onto PCNA. Following these initial studies, we have also discovered that Y polymerases themselves undergo monoubiquitylation and that their UBDs mediate this modification. This auto-ubiquitylation is believed to lead to an intramolecular interaction between UBD and Ub attached in cis onto the UBD-containing protein. We have mapped monoubiquitylation sites in polη in the C-terminal portion of the protein containing the nuclear localization signal (NLS) and the PIP box. Beside PIP, the NLS motif is also involved in direct interaction of polη with PCNA. Based on these findings, we propose that monoubiquitylation of either NLS or PIP masks them from potential interaction with PCNA. Lastly, using several functional assays, we have demonstrated the importance of all these three motifs in the C-terminus of polη (UBZ, NLS and PIP) for efficient TLS. We have also constructed a mimic of monoubiquitylated polη by genetically fusing polη with Ub. Interestingly, this chimera is deficient in TLS as compared to the wild-type protein. Altogether, these studies demonstrate that the C-terminus of polη constitutes a regulatory module involved in multiple-site interaction with monoubiquitylated PCNA, and that monoubiquitylation of this region inhibits the interaction between polη and PCNA. Our work has also revealed that the UBDs of Y pols as well as of other proteins implicated in DNA damage repair and tolerance, such as the Werner helicase-interacting protein 1 (Wrnip1), are required for their proper sub-nuclear localization. All these proteins localize to discrete focal structures inside the nucleus and mutation of their UBDs results in inability to accumulate in these foci. Interestingly, by exchanging UBDs between different proteins we have learned that each UBD seems to have a distinct functional role, surprisingly not limited to Ubbinding ability. In fact, swapping the UBZ of Wrnip1 with the UBM of polι abolished the localization of Wrnip1 to foci despite preserving the Ub-binding ability of the chimeric protein. In summary, this work provides an overview of how post-translation modification of proteins by Ub can regulate several DNA transactions. Firstly, key regulators (e.g. PCNA) can be differentially modified by Ub. Secondly, specialized UBDs (e.g. UBM, UBZ) embedded only in a subset of proteins act as modules able to recognize these modifications. Thirdly, by means of mediating auto-ubiquitylation, UBDs can modulate the behaviour of host proteins by allowing for either in cis or in trans Ub-UBD interactions.
The title compound, C25H22O5, was obtained by a dehydrogenative carbonylation reaction. It crystallizes with one half-molecule in the asymmetric unit. The molecules have crystallographic C2 symmetry and the two atoms of the carbonyl group are located on the rotation axis. The methoxy groups are coplanar with the benzene ring to which they are attached [C-C-O-C = 1.0 (6)°]. The two furan rings are inclined at 17.3 (3)° with respect to each other and the dihedral angle between the furan ring and the benzene ring is 75.83 (12)°. The crystal structure is stabilized by C-H...O hydrogen bonds. Key indicators: single-crystal X-ray study; T = 183 K; mean ( σ(C–C) = 0.006 Å; R factor = 0.081; wR factor = 0.195; data-to-parameter ratio = 13.4.
Die vorliegende Arbeit befasste sich in erster Linie mit der Regulation des P2X2 Rezeptors (P2X2R) durch Phosphoinositide (PI). P2X Rezeptoren sind durch extrazelluläres ATP aktivierte Kationenkanäle, die ubiquitär unter Vertebraten, v. a. im zentralen wie peripheren Nervensystem exprimiert werden. Bis heute sind 7 verschiedene Untereinheiten dieser Rezeptorfamilie bekannt, die nach homo- oder heterotrimerer Assemblierung unterschiedliche funktionelle Phänotypen ausbilden. Die P2X Rezeptoren sind an einer Vielzahl von physiologischen und pathophysiologischen Prozessen beteiligt. Für ihre Beteiligung am zellulären Signalgeschehen wurde in der Vergangenheit der Begriff der purinergen Signaltransduktion geprägt. PI4,5P2 ist ein zelluläres, an der Innenseite der Plasmamembran verankertes Phospholipid, dem zahlreiche, essentielle Funktionen zukommen. Dass es auch Signalfunktion besitzen kann, wurde erst spät (1980) bekannt; dass es darüber hinaus zudem membranäre Transportsysteme reguliert, konnte erst in den letzten Jahren gezeigt werden. Die ersten Kanäle, für die eine Phosphoniositid (PI)-Beeinflussung nachgewiesen wurde, waren die einwärts gleichrichtenden K+-Kanäle. 2006 wurden die ersten vorläufigen Hinweise publiziert, dass auch die Kanalfunktion der P2X Rezeptoren durch Phosphoinositide beeinflusst werden kann. Darauf aufbauend wurde in der vorliegenden Arbeit der P2X2R nach Expression in Xenopus Oozyten elektrophysiologisch auf eine mögliche Regulation durch PIPns untersucht. Um die in der Oozyte vorliegenden PI-Level gezielt während der Messung ändern zu können, wurde die spannungsgesteuerte Phosphoinositid-Phosphatase Ci-VSP coexprimiert. Ci-VSP, die der PTEN-Phosphatase strukturell sehr ähnlich ist, wurde 2005 aus der Schlauchascidie Ciona intestinalis kloniert. In der veröffentlichten Klonierungsarbeit wurde bereits gezeigt, dass Ci-VSP in der Lage ist, bekannte PI4,5P2-sensitive Membrankanäle, wie z. B. bestimmte K+-Kanäle, spannungsabhängig zu inhibieren. Es konnte in TEVC-Experimenten gezeigt werden, dass die durch Depolarisation induzierte Aktivierung dieser Phosphatase den P2X2 Rezeptorstrom in seiner Desensibilisierung sowohl beschleunigt als auch verstärkt. Dieser Effekt war spannungsabhängig und nahm mit höherer Depolarisation zu. Die ermittelte Spannungsabhängigkeit stimmte dabei mit dem sensitiven Potentialbereich der spannungsgesteuerten Ci-VSP-Domäne, gemessen an ihren gating-Strömen, überein. Der „Ci-VSP-Effekt“ auf den P2X Rezeptor konnte nur in Anwesenheit von ATP, d.h. bei aktiviertem Rezeptor, beobachtet werden. Wurden die Oozyten mit Wortmannin, einem PI4-Kinase(PI4K)-Inhibitor, behandelt, zeigte sich eine vergleichbare Veränderung des Rezeptorstroms. Eine PI4K-Inhibition zielt demnach offensichtlich auf die gleichen Regulationsmechanismen wie die Ci-VSP-Aktivierung. In weiterführenden zellfreien Patch Clamp-Messungen an Oozytenmembranen wurden sowohl Einzelkanal- als auch makroskopische Ströme des P2X2R unter Einfluss verschiedener, intrazellulär verabreichter PIs und PI-beeinflussender Enzyme untersucht. Einzig die Zugabe von PI4,5P2 hatte einen deutlich aktivierenden Einfluss auf den makroskopischen Rezeptorstrom, andere getestete PIs (wie auch PI3-Kinase und PTEN-Phosphatase) zeigten keinerlei Wirkung. Vergleichbare Ergebnisse konnten in vorläufigen Einzelkanal-Messungen an diesem Rezeptor Subtyp beobachtet werden. Da die PI4-Kinase offensichtlich an der beobachteten Beeinflussung der P2X2R Desensibilisierung beteiligt ist, wurde die P2X2-Rezeptorsequenz auf potentielle - über sogenannte SH3-Epitope vermittelte - PI4K-Interaktionsbereiche hin untersucht. Diese SH3-Epitope kommen in vielen zellulären Proteinen vor, um Protein-Protein-Interaktionen zu vermitteln. Nach Sequenzanalyse des maßgeblich am Desensibilisierungsgeschehen beteiligten C-Terminus des P2X2R konnte im distalen Teil ein SH3-Bindungsmotiv lokalisiert werden, das daraufhin durch gerichtete Mutagenese (P2X2-P451A/P454A) unwirksam gemacht wurde. Dieser mutierte Rezeptor verhielt sich in seiner Desensibilisierung wie der Wildtyp nach Wortmannin-Behandlung, zeigte also eine intrinsisch verstärkte Desensibilisierung. Eine Wortmannin-Behandlung der Oozyten, die den mutierten Rezeptor exprimierten, führte hingegen zu keiner weiteren Beeinflussung des Rezeptorstroms. Somit konnte letztlich der Schluss gezogen werden, dass die PI4K, und das mit ihr in direkter Verbindung stehende PI4,5P2, einen maßgeblichen Einfluss auf das Desensibilisierungsverhalten des P2X2R hat. Auf Basis der erarbeiteten Befunde wurde ein kinetisches Reaktionsmodell des P2X2R erstellt, das bisher aufgestellte Modelle mit den Ergebnissen dieser Arbeit vereint, aber auch in teilweisem Gegensatz zu dem von FUJIWARA & KUBO [2006] steht. Des Weiteren wurde im Verlauf dieser Arbeit die reversible Inhibition des P2X2R durch eine Reihe von Aminoglykosid-Antibiotika untersucht. Durch Analyse der Dosis-Wirkungs-Beziehungen, der Spannungs- sowie wie ATP-Konzentrations-Abhängigkeit der Inhibition konnte gezeigt werden, dass es sich dabei um einen nicht-kompetitiven open pore block handelte. Durch weiterführende Untersuchungen an einer nicht-desensibilisierenden P2X2/1 Rezeptorchimäre wurde gezeigt, dass eine Aminoglykosid-Inhibition die ATP-Dissoziation von der Rezeptorbindungsstelle signifikant verlangsamte. Dieser Befund deutet auf eine im Vergleich zum geschlossenen Zustand erhöhte Affinität des offenen Zustands für ATP hin. Neben den hier untersuchten Aminglykosiden sind bislang keine weiteren Substanzklassen bekannt, die den P2X2R durch einen derartigen Mechanismus hemmen.
The use of chemically synthesized short interfering RNAs (siRNAs) is currently the method of choice to manipulate gene expression in mammalian cell culture, yet improvements of siRNA design is expectably required for successful application in vivo. Several studies have aimed at improving siRNA performance through the introduction of chemical modifications but a direct comparison of these results is difficult. We have directly compared the effect of 21 types of chemical modifications on siRNA activity and toxicity in a total of 2160 siRNA duplexes. We demonstrate that siRNA activity is primarily enhanced by favouring the incorporation of the intended antisense strand during RNA-induced silencing complex (RISC) loading by modulation of siRNA thermodynamic asymmetry and engineering of siRNA 3-overhangs. Collectively, our results provide unique insights into the tolerance for chemical modifications and provide a simple guide to successful chemical modification of siRNAs with improved activity, stability and low toxicity.
Um die Bedeutung bestimmter Neurone oder Klassen von Neuronen innerhalb von Nervensystemen zu untersuchen, sind Methoden, die eine Manipulation der Aktivität der Neurone in vivo erlauben, besonders nützlich. Die bisher zur Verfügung stehenden Methoden haben jedoch Einschränkungen in beispielsweise der Zelltypspezifität, der zeitlichen Präzision, der Reversibilität oder der Anwendbarkeit in frei beweglichen Tieren. Im Rahmen dieser Arbeit wurden optogenetische, d.h. auf der Expression lichtempfindlicher Proteine basierende Methoden entwickelt, um eine präzise Manipulation des Membranpotentials definierter Neurone durch Licht zu ermöglichen. Die Techniken wurden daraufhin zur Untersuchung z.B. der Neurotransmission sowie der Funktion kleiner Netzwerke im Nervensystem des Nematoden Caenorhabditis elegans verwendet. Die zelltypspezifische heterologe Expression des lichtgesteuerten Kationenkanals Channelrhodopsin-2 (ChR2) aus der Grünalge Chlamydomonas reinhardtii ermöglichte es, Muskel- oder Nervenzellen der Nematoden durch blaue Beleuchtung innerhalb weniger Millisekunden zu depolarisieren. Dadurch ließen sich spezifische Verhaltensweisen in frei beweglichen Tieren auslösen. Dieser Ansatz wird in Zukunft die Untersuchung der Bedeutung einzelner Neurone innerhalb ihrer Schaltkreise deutlich erleichtern. So konnte hier gezeigt werden, dass die Photostimulation des propriorezeptiven Neurons DVA eine signifikante Erhöhung der mittleren Körperbiegungswinkel während der sinusförmigen Fortbewegung der Tiere zur Folge hatte. Außerdem wurde versucht, die Anwendbarkeit von ChR2 durch die gezielte Manipulation der subzellulären Lokalisation mittels Fusion mit speziellen Peptiden oder Proteinen zu erhöhen. Des Weiteren wurde eine zur Verwendung von ChR2 analoge Methode zur Hemmung von Neuronen durch Licht entwickelt. Hierfür wurde die lichtgetriebene Cl--Pumpe Halorhodopsin aus Natronomonas pharaonis (NpHR) zelltypspezifisch in C. elegans exprimiert. Durch Photoaktivierung von NpHR mit gelbem Licht war es möglich, Muskelzellen und cholinerge Neurone zu hyperpolarisieren und somit in ihrer Aktivität zu hemmen. Dies führte in frei beweglichen Tieren zu einer augenblicklichen Paralyse verbunden mit einer drastischen Reduktion der Schwimmfrequenz und einer Erhöhung der Körperlänge. Die Aktionsspektren von ChR2 und NpHR sind unterschiedlich genug, um eine unabhängige Photoaktivierung der beiden Proteine mit blauem und gelbem Licht zu ermöglichen. Dadurch konnte die Aktivität von Muskelzellen und cholinergen Neuronen nach Koexpression der beiden Proteine bidirektional kontrolliert werden. Es wurden somit Methoden entwickelt, die in vivo eine zeitlich äußerst präzise Manipulation des Membranpotentials definierter Neurone mit Licht verschiedener Wellenlängen ermöglichen. Die Beobachtung der dadurch induzierten Verhaltensänderungen erlaubt es, zuverlässige Aussagen über die Bedeutung einer Nervenzelle für die Ausprägung eines Verhaltens zu treffen und wird die Erforschung der Nervensysteme von C. elegans und anderen Modellorganismen deutlich vereinfachen. Schließlich wurden in dieser Arbeit optogenetische Methoden zur Untersuchung der synaptischen Übertragung an neuromuskulären Synapsen (neuromuscular junctions, NMJs) von C. elegans entwickelt. Hierfür wurde ChR2 in GABAergen oder cholinergen Neuronen exprimiert, um eine lichtgesteuerte Freisetzung des inhibitorischen Neurotransmitters GABA bzw. des exzitatorischen Neurotransmitters Acetylcholin (ACh) an NMJs zu erreichen. Die Methode wurde OptIoN getauft, ein Akronym für „Optogenetic Investigation of Neurotransmission“, also „optogenetische Untersuchung der Neurotransmission“. Die GABA-Freisetzung hatte ähnlich wie die NpHR-vermittelte Photoinhibition von Muskelzellen eine Reduktion der Schwimmfrequenz und Erhöhung der Körperlänge zur Folge. Die Ausschüttung von ACh verursachte hingegen starke Muskelkontraktionen verbunden mit einer Reduktion der Körperlänge. Die Änderungen der Körperlänge waren bei Mutanten mit verschiedenen Neurotransmissionsdefekten signifikant unterschiedlich im Vergleich zum Wildtyp. Außerdem kam es während längerer Beleuchtungsphasen in Mutanten mit defektem Recycling der synaptischen Vesikel (SV) zu einer verstärkten Abnahme der lichtinduzierten Effekte. OptIoN ermöglicht es dadurch erstmals, die Mechanismen des SV-Recyclings in C. elegans Verhaltensexperimenten zu untersuchen. In elektrophysiologischen Messungen ließen sich durch kurze Lichtpulse wiederholt und mit hoher Frequenz Neurotransmitter-spezifische postsynaptische Ströme evozieren. Diese Ströme waren in Mutanten mit gestörter SVExozytose reduziert und gingen bei wiederholter Stimulation in Mutanten mit defektem SVRecycling schneller zurück. Die Verwendung von OptIoN erleichtert die elektrophysiologische Untersuchung neuronaler Defekte und stellt erstmals eine Möglichkeit dar, Vorgänge der neuronalen Plastizität in dem genetischen Modellsystem C. elegans zu untersuchen. Das Potential von OptIoN zeigte sich unter anderem auch in der Identifizierung eines neuen, über metabotrope GABA-Rezeptoruntereinheiten vermittelten Mechanismus zur heterosynaptischen Hemmung cholinerger Neurone.
Ein bekanntes Beispiel für regulatorische RNA-Protein-Wechselwirkung stellt der Komplex der TAR-RNA von HIV-1 und dem viralen Protein Tat dar. Dieser Komplex ist wichtig für die effiziente Transkription des viralen Genoms. Essentiell für die Erkennung der Stem-Loop Struktur ist die Wechselwirkung des Tat-Proteins mit dem aus drei Nukleotiden bestehenden Bulge der TAR-RNA. Das Wissen über die Prinzipien der Erkennung von Tat zu TAR-RNA sollte es möglich machen, spezifische Liganden zu designen, die als antivirale Tat Antagonisten angreifen können. Das Ziel dieser Arbeit war die Synthese von RNA Liganden für die Festphasenpeptidsynthese (FPPS) basierend auf heteroaromatischen Bausteinen. Als Strategie wurde gewählt, die heteroaromatischen Reste über Amid-Bindungen an ein Fmoc geschütztes (2-Aminoethyl)glycin-Rückgrat einzufügen. Die peptidomimetischen Bausteine X konnten in der FPPS zur Synthese von Tripeptiden mit der allgemeinen Struktur Arg-X-Arg und Modifikationen mit Lysin eingesetzt werden. Die Bindungsaffinitäten der Tripeptide und kleinen Moleküle zur TAR-RNA von HIV-1 wurden über einen fluoreszenzbasierten Assay bestimmt. Der Assay verwendet ein doppelt endmarkiertes Tat-Peptid mit Fluorescein und Rhodamin als Farbstoff. Durch Verdrängung des Tat-Peptides durch einen konkurrierenden Liganden kommt es zur Konformationsänderung des Peptides, die zur Löschung der Lichtemmission führt. Dabei zeigen die Tripeptide H2N-(D)Arg-Lactam-(D)Arg-CONH2 (154) und H2N-(D)Arg-Amidin-(D)Arg-CONH2 (158) IC50-Werte von 2-3 mikroM, die auch durch Fluoreszenz Korrelations Spektroskopie (FCS) bestätigt wurden. In massenspektrometrischen Untersuchungen von 158 bzw. Tat-Protein mit TAR-RNA konnten bei beiden Peptiden 1:1 und 1:2-Komplexe beobachtet werden. 158 zeigt antivirale Eigenschaften (IC50 = 10-50 mikroM) in HeLa P4-Zellassays. Durch NMR-Untersuchungen und molekulardynamische Berechnungen war es möglich, eine Konformationsänderung der TAR-RNA durch eine Wechselwirkung mit Guanidinium-Gruppen festzustellen. Ein weiteres Ziel der Arbeit war daher ausgehend von den gewonnenen Daten die Untersuchung des Bindungskonzeptes von Diaminopyrazolen und Indazolen. Diaminopyrazole mit kleinen Resten und Triaminopyrazol übertreffen im protonierten Zustand den dikationischen Liganden Argininamid. In Übereinstimmung mit dem Bindungsmodell verhalten sich protonierte Aminopyrazole wie „Super-Guanidine“ hinsichtlich der TAR-RNA. Das Einfügen des Triaminopyrazols in ein Phenazin-Grundgerüst führt zu Verbindungen, die im protonierten und reduzierten Zustand zusätzliche Wasserstoffbrückenbindungen eingehen können und nicht planar, aber lipophil sind. Der Austausch von Stickstoff zu Sauerstoff im Phenazinring sollte den reduzierten Zustand stabilisieren. Die resultierende Struktur ist jedoch zersetzlich, so dass auf weitere Untersuchungen verzichtet wurde.
There are two independent molecules in the asymmetric unit of the title compound, C19H24S2. In both molecules, the aliphatic segment of the ligand is in an all-trans conformation: the –S–(CH2)5–S–bridging chain is almost planar (r.m.s. deviation for all non-H atoms = 0.0393 and 0.0796 Å in the two molecules) and maximally extended. Their mean planes form dihedral angles of 4.08 (6)/20.47 (6) and 2.22 (6)/58.19 (6)° with the aromatic rings in the two molecules. The crystal packing is purely governed by weak intermolecular forces.
The title compound, C20H22O4S2, was synthesized by the reaction of 1,4-dibromobutene with methyl thiosalicylate. The aliphatic segment of this ligand is in an all-trans conformation. The bridging chain, –S-(CH2)4-S–, is almost planar (r.m.s. deviation for all non-H atoms: 0.056 Å) and its mean plane forms dihedral angles of 16.60 (7) and 5.80 (2)° with the aromatic rings. In the crystal, the molecules are linked by weak C—H ... O interactions into chains with graph-set notation C(14) along [0 0 1]. The crystal studied was a racemic twin, the ratio of the twin components being 0.27 (9):0.73 (9).
Single crystals of the title compound, C10H11NO4, an intermediate in the industrial synthesis of yellow azo pigments, were obtained from the industrial production. The molecules crystallize as centrosymmetic dimers connected by two symmetry-related N—H⋯O=C hydrogen bonds. Each molecule also contains an intramolecular N—H⋯O=C hydrogen bond. The dimers form stacks along the a-axis direction. Neighbouring stacks are arranged into a herringbone structure.
Aptamers that can be regulated with light allow precise control of protein activity in space and time and hence of biological function in general. In a previous study, we showed that the activity of the thrombin-binding aptamer HD1 can be turned off by irradiation using a light activatable "caged" intramolecular antisense-domain. However, the activity of the presented aptamer in its ON state was only mediocre. Here we studied the nature of this loss in activity in detail and found that switching from 5'- to 3'-extensions affords aptamers that are even more potent than the unmodified HD1. In particular we arrived at derivatives that are now more active than the aptamer NU172 that is currently in phase 2 clinical trials as an anticoagulant. As a result, we present light-regulatable aptamers with a superior activity in their ON state and an almost digital ON/OFF behavior upon irradiation.
Die mitochondriale Atmungskette und insbesondere die Cytochrom c Oxidase als deren terminales Enzym sind essentiell für den Energiestoffwechsel eukaryotischer Zellen. Die Assemblierung der mitochondrialen Cytochrom c Oxidase mit ihren bis zu 13 Untereinheiten ist noch nicht bis ins Detail aufgeklärt, aber es handelt sich um einen geordneten, stark regulierten Prozess, und Defekte der Assemblierung sind häufig Ursache für neurodegenerative und myopathische Erkrankungen. In Eukaryoten sind bisher mehr als 30 Proteine identifiziert worden, die an der Biogenese der Cytochrom c Oxidase beteiligt sind, darunter Surf1. Beim Menschen führt der Verlust von Surf1 zu einer letalen neurodegenerativen, als Leigh-Syndrom bezeichneten Krankheit, wobei die genaue Rolle von Surf1 bei der Assemblierung der Cytochrom c Oxidase unklar ist. Das Bodenbakteriums Paracoccus denitrificans kann als Modellorganismus für die mitochondriale Atmungskette dienen, da seine aeroben Atmungskettenkomplexe eine deutliche Homologie zu denen der Mitochondrien auf weisen. P. dentrificans besitzt zwei homologe Gene für Surf1, die in Operons mit terminalen Oxidasen assoziiert sind: surf1c ist im cta-Operon lokalisiert, das für Untereinheiten der aa3-Cytochrom c Oxidase kodiert, und surf1q im qox-Operon, das die Gene für die ba3-Ubichinoloxidase enthält. Vorrangiges Ziel dieser Arbeit war es, diese beiden Gene und ihre Translationsprodukte zu charakterisieren und auf ihre Funktion hin zu untersuchen. Chromosomale Einzel- und Doppeldeletionen beider surf1-Gene führten zu einem spezifischen Aktivitätsverlust der jeweiligen Oxidase in Membranen, wobei surf1c und surf1q unabhängig von einander für ihre korrespondierenden Oxidasen zuständig sind und keine überlappenden Funktionen besitzen. Dies war der erste experimentelle Hinweis, dass ein Surf1-Protein auch bei der Assemblierung einer Chinoloxidase eine Rolle spielt. Untersuchungen an aufgereinigter aa3-Cytochrom c Oxidase ergaben, dass der Hämgehalt im Fall der surf1c-Deletion stark vermindert ist. Diese Ergebnisse bestätigten frühere Vermutungen, dass Surf1 eine Rolle beim Häm-Einbau in UEI spielt. Diese Arbeit untersuchte zum ersten Mal aufgereinigtes Surf1-Protein und lieferte mit der Charakterisierung weitere Hinweise auf seine Rolle beim Häm a-Einbau in terminale Oxidasen. So konnte gezeigt werden, dass sowohl Surf1c und als auch Surf1q Häm a in vivo binden. Mit Hilfe spektroskopischer Methoden und der isothermen Titrationskalorimetrie konnte die Bindung von Häm a an apo-Surf1c und Apo-Surf1q quantifiziert werden. Beide Proteine binden Häm a mit submikromolaren Affinitäten in einer 1:1 Stöchiometrie. Ligandenbindungspektren wiesen weiterhin darauf hin, dass das Eisenatom des Häm a in Surf1 nur über fünf Liganden koordiniert ist. Über gerichtete Mutagenese konnte der konservierte Histidinrest His193 für Surf1c und His202 für Surf1q als möglicher fünfter Ligand des Eisenatoms identifiziert werden. Untersuchungen zur Wechselwirkung mit anderen Proteinen zeigten eine direkte Interaktion zwischen der Häm a Synthase und den beiden Surf1-Proteinen in vivo und in vitro, die zuvor noch für kein anderes Surf1-Homolog beschrieben war. Zusätzlich konnte ein Transfer von Häm von der Häm a Synthase auf Surf1c bzw. Surf1q in vitro erreicht werden. Für Surf1c ließ sich außerdem eine Interaktion mit Untereinheit I der Cytochrom c Oxidase nachweisen. Obwohl die Funktion von Surf1 im Rahmen der Biogenese der Cytochrom c Oxidase noch nicht abschließend geklärt werden konnte, liefern die Ergebnisse dieser Arbeit nichtsdestotrotz klare Hinweise auf eine direkte Beteiligung von Surf1 beim Einbau der Häm a-Kofaktoren, und ein neues Modell für die Funktion von Surf1 konnte erstellt werden.
CITIES (Chemistry and Industry for Teachers in European Schools) ist ein COMENIUS-Projekt, in dessen Rahmen Materialien für den Chemieunterricht erstellt und erprobt werden. Diese Materialien sollen Lehrkräften helfen, ihren Unterricht attraktiver zu gestalten, indem der Bezug sowohl zum Alltag und der Lebenswelt als auch zur chemischen Industrie aufgezeigt wird. Chemie des Alltags Nicht immer besteht die Zeit, im Unterricht ein zusammenhängendes größeres Projekt zu bearbeiten. Experimente, die chemische Hintergründe der Funktion von Produkten oder von Vorgängen aus der Alltags- und Lebenswelt der Schülerinnen und Schüler aufzeigen, können aber vielfach in den Unterricht integriert werden. Im dritten Bereich des Moduls wurde eine Auswahl solcher Experimente zusammengestellt. Im einzelnen finden sich Versuche zu folgenden Themen: 1. Bestimmung der Dicke der Aluminiumschicht einer Verpackungsfolie 2. Herstellen von Formaldhyd-Harnstoff-Leim und Nachweis dieses Leims in Spanplatten und Linoleum 3. Polyurethan auf der Basis von Ricinusöl 4. Nylon durch Grenzflächen-Polykondensation 5. Ascorbinsäure als Reduktionsmittel und Nachweis von Ascorbinsäure in Gemüse 6. Nachweis reduzierender Zucker 7. Nachweis von Proteinen 8. Herstellung von Biodiesel 9. Fluoreszenz von Pflanzenfarbstoffen
We previously proposed that the dimeric cytochrome bc(1) complex exhibits half-of-the-sites reactivity for ubiquinol oxidation and rapid electron transfer between bc(1) monomers (Covian, R., Kleinschroth, T., Ludwig, B., and Trumpower, B. L. (2007) J. Biol. Chem. 282, 22289-22297). Here, we demonstrate the previously proposed half-of-the-sites reactivity and intermonomeric electron transfer by characterizing the kinetics of ubiquinol oxidation in the dimeric bc(1) complex from Paracoccus denitrificans that contains an inactivating Y147S mutation in one or both cytochrome b subunits. The enzyme with a Y147S mutation in one cytochrome b subunit was catalytically fully active, whereas the activity of the enzyme with a Y147S mutation in both cytochrome b subunits was only 10-16% of that of the enzyme with fully wild-type or heterodimeric cytochrome b subunits. Enzyme with one inactive cytochrome b subunit was also indistinguishable from the dimer with two wild-type cytochrome b subunits in rate and extent of reduction of cytochromes b and c(1) by ubiquinol under pre-steady-state conditions in the presence of antimycin. However, the enzyme with only one mutated cytochrome b subunit did not show the stimulation in the steady-state rate that was observed in the wild-type dimeric enzyme at low concentrations of antimycin, confirming that the half-of-the-sites reactivity for ubiquinol oxidation can be regulated in the wild-type dimer by binding of inhibitor to one ubiquinone reduction site.
In dieser Arbeit sollte die Bindung von Tetrahydromethanopterinderivaten an zwei Enzyme des methanogenen, CO2-reduzierenden Energiestoffwechselweges strukturell charakterisiert werden. In jenem Stoffwechselweg verläuft die schrittweise Reduktion von CO2 über die Bindung an den C1-Carrier Tetrahydromethanopterin (H4MPT), ein Tetrahydrofolat-Analogon, welches unter anderem in methanogenen Archaeen zu finden ist. Die thermophilen bzw. hyperthermophilen Ursprungsorganismen der untersuchten Enzyme, Methanothermobacter marburgensis, Methanocaldococcus jannaschii und Methanopyrus kandleri, sind aufgrund ihrer Anpassung an extreme Habitate durch spezielle genomische, strukturelle und enzymatische Eigenschaften von strukturbiologischem Interesse. Beim ersten in dieser Arbeit untersuchten Enzym handelte es sich um den aus acht Untereinheiten bestehenden membrangebundenen N5-Methyl-H4MPT:Coenzym M-Methyltransferasekomplex (MtrA-H). Dieser katalysiert in einem zweistufigen Mechanismus den Methyltransfer von H4MPT zum Co(I) der prosthetischen Gruppe 5’-Hydroxybenzimidazolylcobamid (Vitamin B12a), um die Methylgruppe dann auf Coenzym M zu übertragen. Gleichzeitig findet ein der Energiekonservierung dienender vektorieller Natriumtransport über die Membran statt. Für den Mtr-Komplex aus M. marburgensis (670 kDa) lag bereits ein Protokoll zur Reinigung unter anaeroben Bedingungen vor. Dieses wurde im Rahmen dieser Arbeit verbessert, für die Isolierung und Reinigung unter aeroben Bedingungen vereinfacht und für die Erfordernisse der zur Strukturbestimmung verwendeten elektronenmikroskopischen Einzelpartikelmessung optimiert. Neben der Präparation des kompletten Komplexes MtrA-H wurde als Alternative die Präparation des Enzymkomplexes MtrA-G unter möglichst vollständiger Abtrennung der hydrophilsten Untereinheit MtrH gewählt. Mit der zu diesem Zweck entwickelten Methode konnte das Abdissoziieren von MtrH besser als im etablierten Protokoll kontrolliert und somit die Homogenität der Probe deutlich verbessert werden. Dies schafft zum einen die Vorraussetzungen für eine Kristallisation zur Röntgenstrukturanalyse, zum anderen war auch in bei der elektronenmikroskopischen Einzelpartikelmessung erkennbar, dass mit dem Mtr-Komplex ohne MtrH bessere Ergebnisse zu erzielen sind. Parallel zu den Untersuchungen am Gesamtkomplex sollten die den Cobamid-Cofaktor bindende Untereinheit MtrA sowie die H4MPT-bindende Untereinheit MtrH in für die Kristallisation und röntgenkristallographische Untersuchung ausreichender Menge und Qualität gereinigt werden. Hierfür wurden MtrA und MtrH aus oben genannten Organismen für die heterologe Expression in E. coli kloniert, die Expressionsbedingungen optimiert und Reinigungsprotokolle etabliert. Anschließend wurden die Untereinheiten umfangreichen Kristallisationsversuchen unterzogen. Die Untereinheit MtrA aus M. jannaschii konnte ohne die C-terminale Transmembranhelix als lösliches Protein in E. coli produziert und als Holoprotein bis zur Homogenität gereinigt werden. Bei M. kandleri MtrA gelang die Herstellung von geringen Mengen teilweise löslichen StrepII-Fusionsproteins ohne C-terminale Transmembranhelix in E. coli. Eine Produktion der Untereinheit MtrH in E. coli als lösliches Protein war bei keiner der in dieser Arbeit getesteten Varianten möglich. Mit dem in Einschlusskörperchen exprimierten Protein aus M. marburgensis wurde eine Reinigung und Rückfaltung versucht. Auch eine Co-Expression der Untereinheiten MtrA und MtrH, durch welche eine bessere Faltung und Löslichkeit erreicht werden sollte, war nur in Einschlusskörperchen möglich. Das zweite in dieser Arbeit untersuchte Enzym, die F420 abhängige N5,N10 Methylen-H4MPT-Dehydrogenase (Mtd), katalysiert den reversiblen, stereospezifischen Hydrid-Transfer zwischen reduziertem F420 (F420H2) und Methenyl-H4MPT+, welches hierbei zu Methylen-H4MPT reduziert wird. Die Reaktion verläuft über einen ternären Komplex bestehend aus Protein, Substrat (Methylen-H4MPT) und Cosubstrat (F420), welcher strukturell charakterisiert werden sollte. Das gereinigte, rekombinante Enzym aus M. kandleri wurde mit verschiedenen H4MPT- und F420-Derivaten co-kristallisiert, die Struktur des ternären Komplexes röntgenkristallographisch bestimmt und die Bindung von H4MPT und F420 analysiert. Methenyl-H4MPT+ und F420H2 sind in der in dieser Arbeit gelösten Kristallstruktur in katalytisch aktiver Konformation gebunden, jedoch kann bei einer Auflösung von 1,8 Å nicht beurteilt werden, ob Methylen-H4MPT und F420 oder Methenyl-H4MPT+ und F420H2 vorlagen. Ein Vergleich mit der Struktur von M. kandleri-Mtd (KMtd) ohne Substrat und Cosubstrat ergab nur äußerst geringe Abweichungen in der Proteinkonformation, sodass sich KMtd überraschenderweise als Beispiel für ein Enzym mit ungewöhnlich starrer, vorgegebener Bindetasche erwies.
Das Ziel dieser Arbeit ist die Synthese von nicht-kovalenten supramolekularen Komplexen, um nachfolgend aus den Kristallstrukturen dieser Verbindungen bessere Einsichten über die H-Brückenwechselwirkungen zwischen den organischen Molekülen zu erlangen. Um an dieses Ziel zu kommen, wurde ein Konzept zur gezielten Synthese von supramolekularen Komplexen entwickelt. Die Steuerung des Co-Kristallisationsprozesses ist keine einfache Aufgabe, deshalb darf der Verlauf einer solchen Synthese von nicht-kovalenten Verbindungen nicht einfach dem Zufall überlassen werden. Der Start erfolgt mit einer gründlichen Auswahl der Verbindungen durch Intuition mit Hilfsmitteln (Chemikalienkataloge und chemische Datenbanken). In einem Selektionsabschnitt werden chemische Datenbanken, analytische Methoden und rechnergestützte Programme zu Hilfe genommen. Aussichtsreiche Kandidaten werden mit dem Programm SUPRA getestet; so zeigt sich, ob das gewünschte H-Brückenmuster prinzipiell realisierbar ist. Auch die verschiedenen Vorproben zum Test auf H-Brücken gebundene Komplexe (siehe Kapitel 8 und 9) liefern wertvolle Informationen. Mit den so ausgewählten Kandidaten wurden schließlich Kristallisationsversuche angesetzt. Falls möglich können Strukturvorhersagen der jeweiligen Komplexe mit Hilfe von Strukturvorhersageprogrammen getroffen werden (siehe Kapitel 7). Die erhaltenen Co-Kristalle werden anschließend am Einkristalldiffraktometer gemessen und darauf folgend die Kristallstrukturen gelöst. Um die Reaktionsbedingungen zur Bildung von bestimmten supramolekularen Komplexen kontrollieren zu können, wurden die Gitterenergie des Komplexes berechnet und die Schmelzpunkte bestimmt. Mit Kenntnis der Gitterenergie des Komplexes, der Edukte bzw. der Pseudokomplexe kann die Reaktionsbedingung so eingestellt werden, dass nur eine bestimmte Verbindung bei einer vorgegebenen Reaktionsbedingung auskristallisiert. Der Einfluss bzw. die Auswahl von Lösungsmitteln darf bei Co-Kristallisationsprozessen nicht vernachlässigt werden. Der erste Abschnitt dieser Arbeit befasst sich mit der Synthese von supramolekularen Komplexen aus Komponenten, die ausschließlich zwei Protonen-Akzeptoren bzw. zwei Protonen-Donoren (AA-DD-Muster) beinhalten. Die fehlgeschlagenen Experimenten passen zur Trefferquote dieser Verbindungsklasse in der CSD. Der Grund für diesen Misserfolg ist grundsätzlich auf die geometrische Anordnung der freien Elektronenpaare der Akzeptoren zurückzuführen. Sind Sauerstoffatome an solchen H-Brückenmustern als H-Akzeptoren beteiligt, ist es oft nicht möglich, eine lineare Anordnung der H-Donorengruppe mit diesen Sauerstoffatomen als Akzeptoren zu bewerkstelligen. Nach erfolglosen Bemühungen wandten wir uns Verbindungen zu, die mindestens drei Akzeptoren bzw. Donoren im jeweiligen Molekül aufweisen. Für dieses Experiment wurden zunächst starre, kleine organische Moleküle ausgesucht. Das AAA-DDD-Muster konnte im gesamten Verlauf dieser Arbeit nicht hergestellt werden. Es ist nicht leicht, eine Verbindung zu synthetisieren, bei der alle H-Akzeptorgruppen auf einer Seite benachbart angeordnet sind. Eine Literaturaussage, dass Verbindungen mit dem AAA-DDD-Muster die stabilsten aller dreifach gebildeten Wasserstoffbrückenbindungen sind, konnte daher nicht experimentell verifiziert werden. Unsere Gruppe hat daraufhin versucht, die bekannten H-Brückenmuster aus den Watson-Crick-Basenpaarungen (AAD-DDA) sowie das ADA-DAD-Muster nachzuahmen. Nur mit dem Muster ADA-DAD konnten Erfolge erzielt werden. Die entsprechenden Komplexe konnten nicht nur erfolgreich synthetisiert, sondern auch durch die Einführung sterisch anspruchsvoller Substituenten die Bildung von unerwünschten Wasserstoffbrückenmustern gezielt verhindert werden. Nachdem die Synthese von zahlreichen Komplexen gelang, sind wir zu pharmazeutischen Wirkstoffen übergegangen. Mit diesem Schritt soll eine Brücke zur Pharmazie geschlagen werden. Vier pharmazeutische Wirkstoffe mit definiertem Wasserstoffbrückenmuster wurden ausgesucht und anschließend mit den passenden Gegenstücken zur Kristallisation angesetzt. Nur für Trimethoprim konnten Co-Kristalle erhalten werden. Mit diesem Wirkstoff konnte anschließend gezeigt werden, wie sich Moleküle in bestimmten chemischen Umgebungen im Festkörper anpassen und ihre geometrische Anordnung ändern, um die bestmöglichen Wechselwirkungen zu erreichen. Sämtliche Kristallstrukturen von Trimethoprim, die in der CSD in neutraler Form aufzufinden sind, demonstrieren, wie flexibel diese Verbindung in Abhängigkeit von der Umgebung ihre Konformation ändert. In dieser Arbeit konnte auch gezeigt werden, wie Kristallisationsbedingungen verändert werden sollten, um den gewünschten Komplex herstellen zu können. Die Schmelzpunktbestimmung sowie die Kombination mit der Gitterenergie dienten dazu, für die gegebenen Verbindungen die passenden Bedingungen für den Kristallisationsprozess zu ermitteln. Die Schmelztemperaturen von drei in der Struktur ähnlichen Komplexen liegen jeweils zwischen den Schmelztemperaturen ihrer Ausgangsverbindungen, was zu der Annahme verleitet, dass bei höheren Temperaturen die Verbindungen mit höheren Schmelztemperaturen und somit stabileren Kristallgittern bevorzugt gebildet werden. Wird die Temperatur gesenkt, so könnten alle Formen von Kristallen (die der Edukte, Pseudokomplexe und der supramolekularen Komplexe) in einer einzigen Probe anfallen. Um die Gültigkeit dieser Annahme zu überprüfen, bedarf es der Durchführung von Pulveraufnahmen der gesamten Proben. Diese konnten aufgrund der geringen Mengen an Kristallsubstanz nicht realisiert werden. In Zukunft wird das Augenmerk besonders auf die Erforschung von supramolekularen Komplexen mit anspruchsvolleren Freiheitsgraden gelegt. Diese Komplexe sollen mehrere Rotationsfreiheitsgrade besitzen bzw. aus mehr als vier H-Brücken komplementär zusammengesetzt sein. Darüber hinaus ist unsere Gruppe immer noch bemüht, Komplexe zu co-kristallisieren, die am Ende die Muster bzw. die Konstellationen aufweisen, die von vornherein konzeptionell ausgearbeitet wurden.
Crystals of the title compound, C12H8N2·C7H8O2, were obtained during cocrystallization experiments of a compound with two hydrogen-bond donors (2-hydroxybenzyl alcohol) with another compound containing two hydrogen-bond acceptors (phenanthroline). Unexpectedly, the two molecules do not form dimers with two O—H ... N hydrogen bonds connecting the two molecules. However, one of the hydroxy groups forms a bifurcated hydrogen bond to both phenanthroline N atoms, whereas the other hydroxy group forms an O—H ... O hydrogen bond to a symmetry-equivalent 2-hydroxybenzyl alcohol molecule. In addition, the crystal packing is stabilized by Pi – Pi interactions between the two phenanthroline ring systems, with a centroid–centroid distance of 3.570 Å.
The title compound, C6H5NO2·C6H6O2, crystallizes with one pyridinium-2-carboxylate zwitterion and one molecule of benzene-1,2-diol in the asymmetric unit. The crystal structure is characterized by alternating molecules forming zigzag chains running along the a axis: the molecules are connected by O—H ... O and N—H ... (O,O) hydrogen bonds.
CITIES (Chemistry and Industry for Teachers in European Schools) ist ein COMENIUS- Projekt, in dessen Rahmen Materialien für den Chemieunterricht erstellt und erprobt werden. Diese Materialien sollen Lehrkräften helfen, ihren Unterricht attraktiver zu gestalten, indem der Bezug sowohl zum Alltag und der Lebenswelt als auch zur chemischen Industrie aufgezeigt wird. Die Diskussion um eine gute Ernährung sowie empfehlenswerte und weniger empfehlenswerte Lebensmittel ist für Schülerinnen und Schüler ein weiteres interessantes Thema, das deshalb oft im Chemieunterricht im Zusammenhang mit den Themen Kohlenhydrate, Fette und Eiweiße behandelt wird. In dem für CITIES ausgewählten Beispiel wird eine ungewöhnliche Sichtweise eingenomen: Ausgangspunkt ist eine Dose mit Ravioli. Es wird nun der Frage nachgegangen, welche Funktion die Konservendose für die Konservierung der Lebensmittel hat und es werden Inhaltsstoffe der Ravioli und der Soße nachgewiesen. Insgesamt eignen sich die Thematik und die Herangehensweise für die Erarbeitung einer großen Spanne von Themenbereichen, die von der Korrosion als bis zu unterschiedlichen Nachweisen für Zucker bzw. Kohlenhydraten reichen. Aber die Chemie rund um die Raviolidose kann auch zur Wiederholung und Vertiefung von vorab erarbeiteten Inhalten etwa am Ende eines Schuljahres eingesetzt werden. Für diesen Themenbereich wurden unterschiedliche Materialien entwickelt: 1. Eine kurze Einführung gibt eine Übersicht über die gesamte Thematik. Hier werden auch historische Aspekte der Lebensmittelkonservierung angesprochen. s.a. URN: urn:nbn:de:hebis:30-85789 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/8578/ 2. Experimente zum Thema finden sich in einer separaten Versuchssammlung. Überwiegend handelt es sich dabei um Schülerversuche, die einfach durchgeführt werden können. Die Theorie zu den einzelnen Experimenten wird jeweils kurz aufgeführt. s.a. URN: urn:nbn:de:hebis:30-85789 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/8578/ 3. Die Möglichkeit der Umsetzung im Unterricht wird in einem drittel Teil exemplarisch dargestellt.
Epidermal growth factor (EGF) receptor belongs to the broad family of enzymatic receptors called receptor tyrosine kinases (RTKs). Generally, the binding of a ligand to these receptors leads to activation of their intracellular kinase activity that sets in motion a cascade of signaling events. In order to ensure appropriate responses to physiological stimuli, the cell is endowed with the ability to regulate signal transduction via numerous mechanisms such as dephosphorylation of the RTK and its substrates as well as downregulation of the RTK. Activation of EGFR is a potent mitogenic (proliferative) and motogenic (cell motility) signal that plays crucial roles during embryonic development and maintenance of adult tissue. EGFR signaling is primarily regulated by ligand-induced receptor internalization with subsequent degradation in lysosomes. While the complex of proteins that are recruited to EGFR after its activation is well understood, proteins that interact with the receptor in the absence of ligand binding are still not systematically studied. With the goal of identifying novel binding partners of non-activated EGFR, a membrane based yeast-two hybrid screen (MYTH) was conducted. MYTH is based on the principle of in vivo reconstitution of the N-terminus (Nub) and C-terminus (Cub) halves of ubiquitin once brought into close proximity. A chimeric protein consisting of EGFR fused to Cub and a transcription factor was used as a bait to screen Nub-tagged cDNA library. Analysis of resultant yeast transformants revealed a total of 87 proteins to interact with EGFR. Of these only 11 were previously shown to bind to EGFR. A majority of the other proteins were shown to interact with the receptor by yeast retransformation. Fifteen were confirmed to bind to EGFR by coimmunoprecipitation assays in mammalian cells. One of the novel EGFR interactors identified in the screen was histone deacetylase 6 (HDAC6). This deacetylase is localized in the cytoplasm and known to deacetylate alpha-tubulin, HSP90 and cortactin. The juxtamembrane region of EGFR binds to the Cterminus of HDAC6. Functionally, overexpression of wild type HDAC6 stabilized ligand-induced degradation of the receptor. On the other hand, deacetylase deficient or EGFR binding compromised mutants of HDAC6 were able to stabilize EGFR only partially. Downmodulation of HDAC6 expression by RNAi markedly accelerated degradation of the receptor. Taken together, HDAC6 is a negative regulator of EGFR downregulation that is dependent on its deacetylase activity and ability to bind to the receptor. Imaging studies revealed that HDAC6 does not affect internalization of EGFR from the plasma membrane but rather influences the post-endocytic trafficking of the receptor-ligand complex to lysosomes. Pulse-chase experiments using fluorophoretagged EGF showed that EGFR is transported faster towards the peri-nuclear region and delivered to late endosomes rapidly in HDAC6 depleted cells. HDAC6 is demonstrated to act, at least partly, by regulating the acetylation of alpha-tubulin. Upon EGFR activation, acetylation of alpha-tubulin on lysine 40 is progressively increased as shown by mass spectrometry and immunoblotting. Forced expression of a dominant negative mutant of alpha-tubulin, but not wild type alpha-tubulin, led to reduced speed and processive movement of early endosomes in GFP-Rab5 expressing cells. In a surprising twist, EGFR is able to phosphorylate HDAC6 on Tyr570. Phosphorylation of Tyr570 and Ser568 leads to inactivation of the deacetylase function of HDAC6 as shown by in vivo and in vitro assays. In summary, HDAC6 diminishes EGFR downregulation by slowing the transport of intracellular vesicles. The inhibitory effect is removed once HDAC6 is phosphorylated on key residues. In line with these findings, two recent reports have shown that hyper-acetylation of alpha-tubulin induced by inhibition of HDAC6 increases the transport of brain derived neurotrophic factor and JNK interacting protein-1 in different cell systems. Acetylated microtubules are more efficient in recruiting motor proteins like kinesin-1 and dynein. These findings indicate that HDAC6 plays an important regulatory role in intracellular trafficking pathways. However, several outstanding issues still remain unresolved. How does acetylation of microtubules influence vesicular trafficking? In this regard, the temporal and spatial dynamics of alpha-tubulin acetylation following EGFR activation should be studied. Furthermore, whether HDAC6 affects the trafficking of other endocytic cargos and additional organelles is an interesting question to address.
Regulation des matrizellulären Proteins SMOC-1 durch Zytokine und Stickoxid in Rattenmesangiumzellen
(2009)
Zytokine stimulieren in Mesangiumzellen die Produktion und die Freisetzung großer Mengen entzündlicher Mediatoren. In dieser Arbeit wurden mit Hilfe der RAP-PCR („RNA arbitrarily primed polymerase chain reaction“), einer auf mRNA basierenden „Differential display“-Methode, die Effekte von Interleukin-1β (IL-1β) auf das Genexpressionsmuster in glomerulären Rattenmesangiumzellen untersucht. Dabei wurde das matrizelluläre Glykoprotein „Secreted modular calcium-binding protein-1“ (SMOC-1) identifiziert, welches in Mesangiumzellen durch IL-1β herunterreguliert wird. SMOC-1 wird von verschiedenen Zelltypen exprimiert und sezerniert, doch seine biologische Funktion konnte bisher nicht aufgedeckt werden. Weitere Experimente bestätigten, dass die mRNA- und Proteinexpression von SMOC-1 durch proinflammatorische Zytokine, wie IL-1β und Tumornekrosefaktor-α (TNF-α) herunterreguliert wird. Dieser Effekt wird zu einem großen Teil durch die endogene Freisetzung von Stickoxid (NO) aufgrund der Aktivität der induzierbaren NO-Synthase (iNOS) und der nachfolgenden Aktivierung der löslichen Guanylatzyklase (sGC) vermittelt. Außerdem tragen auch reaktive Sauerstoffver-bindungen (ROS), deren Bildung durch die Zytokine verstärkt wird, zur Herunter-regulierung der SMOC-1-Expression bei. Durch In-situ-Hybridisierungsexperimente konnte ferner gezeigt werden, dass die Hemmung der NO-Synthese durch den spezifischen iNOS-Inhibitor L-NIL in einem Rattenmodell der anti-Thy1.1-Glomerulonephritis die SMOC-1-Expression deutlich erhöhte. Dies belegt somit auch in vivo die biologische Relevanz von NO in der Modulierung der SMOC-1-Expression. Die funktionelle Rolle von SMOC-1 in Mesangiumzellen wurde durch die Hemmung der SMOC-1-Expression mit Hilfe einer spezifischen siRNA untersucht. Dabei zeigte sich, dass die Hemmung von SMOC-1 eine deutliche Inhibierung der mRNA-Expression von „Transforming growth factor β1“ (TGF-β1) sowie dessen Gesamtproteinspiegel zur Folge hat. Auch die Aktivität von TGF-β1 wurde reduziert, wie anhand der verringerten Spiegel an aktivem TGF-β1-Protein und der verringerten mRNA-Expression bekannter TGF-β-regulierter Gene, wie „Connective tissue growth factor“ (CTGF), „Plasminogen activator inhibitor-1“ (PAI-1) und Biglykan gezeigt wurde. Diese Ergebnisse deuten auf eine Rolle von SMOC-1 bei der Modulierung des TGF-β1-Signalwegs hin. Zusammenfassend betrachtet scheint NO die SMOC-1-Expression in der akuten glomerulären Entzündung zu vermindern und dadurch die TGF-β-getriebenen profibrotischen Signalprozesse zu limitieren. Der zweite Aspekt dieser Arbeit befasst sich mit der Rolle von Peroxisomen-Proliferator-aktivierten Rezeptoren (PPAR) in der IL-1β-vermittelten Expression der induzierbaren NO-Synthase. PPARα-Aktivatoren steigern in Mesangiumzellen die IL-1β-induzierte Aktivität der iNOS, während die Hemmung von PPARα durch spezifische Inhibitoren oder siRNA die iNOS-Expression/-Aktivität deutlich reduziert. Die Ergebnisse von Promotor-studien zeigten die essentielle Rolle einer möglichen PPAR-Bindestelle im iNOS-Promotor. IL-1β scheint die Bildung eines endogenen PPAR-Liganden zu induzieren, wodurch die Bindung von PPAR-Proteinkomplexen an das regulatorische DNA-Element im iNOS-Promotor verstärkt und dessen Aktivität gesteigert wird. Daneben scheinen jedoch auch Nebeneffekte der PPAR-Aktivatoren, wie die Freisetzung von ROS, zur synergistischen Wirkung auf die IL-1β-induzierte iNOS-Expression beizutragen. Die Wirkung von dualen PPARα/γ-Aktivatoren auf entzündliche Prozesse wird seit längerem diskutiert, daher wurden die biologischen Effekte von neu synthetisierten möglichen dualen PPARα/γ-Aktivatoren auf Entzündungsparameter, wie z. B. die iNOS-Expression, in Mesangiumzellen untersucht. Alle untersuchten Aktivatoren steigerten in der Form von Esterverbindungen die IL-1β-induzierte Expression der iNOS sowie der sekretorischen Phospholipase A2 (sPLA2), während die entsprechenden freien Säuren wenig Effekte zeigten. Diese proinflammatorische Wirkung scheint jedoch weniger auf einer Aktivierung des PPAR-Rezeptors zu beruhen als auf der Freisetzung von ROS, die durch die Aktivatoren teilweise deutlich erhöht wurde. Weitere Experimente zur Charakterisierung der PPAR-spezifischen Wirkung der Aktivatoren sowie zur optimalen Wirkkonzentration sind nötig, bevor der Effekt dieser Aktivatoren auf die inflammatorische Genexpression genau bewertet werden kann.
Die Gentherapie bietet eine interessante alternative Behandlungsoption bei der Therapie der HIV-Infektion und könnte langfristig die Standardmedikation mit antiretroviralen Substanzen ergänzen oder ersetzen. Antivirale Genprodukte, die frühe Schritte im HIV-Replikationszyklus hemmen, bevor sich das Virus in das Genom der Zielzelle integriert hat, sind dabei besonders vielversprechend. Hierzu zählen insbesondere die von der C-terminalen heptad repeat Region des HIV-Hüllglykoproteins gp41 abgeleiteten C-Peptide, die hochwirksame Inhibitoren des Viruseintritts sind. Während des HIV-Eintrittsprozesses interagieren sie mit den viralen gp41 N-Helices und verhindern somit die Ausbildung des zur Fusion von viraler und zellulärer Membran erforderlichen Sechs-Helix-Bündels. Die Sekretion antiretroviraler C-Peptide durch genmodifizierte T-Lymphozyten in vivo birgt großes therapeutisches Potential: Nach Freisetzung in den extrazellulären Raum können die Peptide nicht nur genmodifizierte sondern auch unbehandelte Nachbarzellen vor HIV-Infektion schützen (Bystander-Effekt). Somit könnte selbst mit den heute zur Verfügung stehenden Methoden, mit denen lediglich ein Teil aller potentiellen HIV-Zielzellen modifiziert werden kann, die Virusreplikation effektiv unterdrückt werden. Im Rahmen der vorliegenden Arbeit wurden daher C-Peptid-basierte in vivo sezernierte antivirale Eintrittsinhibitoren (iSAVE) für die HIV-Gentherapie entwickelt. Kurze Peptide, wie die antiviralen C-Peptide, werden von eukaryotischen Zellen aufgrund von Größenbeschränkungen beim Eintritt in den Sekretionsweg jedoch nur schlecht sezerniert. Um die effiziente Sekretion von iSAVE-Peptiden durch genmodifizierte humane Zellen zu erreichen, wurde das C-Peptid daher verlängert. Hierbei wurde das therapeutische Peptid einerseits um nicht antiviral aktive Gerüstelemente ergänzt. Andererseits wurden Concatemer-Konstrukte generiert, in denen zwei C-Peptide jeweils über einen flexiblen oder proteolytisch spaltbaren Linker verbunden sind. Die unterschiedlichen iSAVE-Peptid-Varianten wurden in vitro in transfizierten und transduzierten Zelllinien und in primären humanen T-Lymphozyten charakterisiert. Hierbei wurden Sekretionseffizienz und Prozessierung sowie antivirale Aktivität und Bystander-Inhibition der sezernierten Peptide untersucht. Dabei zeigte sich, dass die Effizienz der C-Peptidsekretion stark mit der Peptidlänge korreliert, so dass durch Sequenzverlängerungen die Sekretion deutlich gesteigert werden konnte. Darüber hinaus waren N-Glykane für die effiziente Sekretion der C-Peptide unerlässlich. Die antiretrovirale Aktivität hingegen reduzierte sich mit zunehmender Peptidlänge dramatisch und wurde auch durch N-Glykane leicht beeinträchtigt, so dass weder die durch Gerüstelemente verlängerten C-Peptide, noch die ungespaltenen C-Peptid-Concatemere antiretrovirale Wirkung zeigten. Durch die Generierung proteolytisch spaltbarer C-Peptid-Concatemere konnten die strukturellen Erfordernisse für effiziente Sekretion mit hoher inhibitorischer Aktivität vereinbart werden. Die Prozessierung der Concatemere durch die Proprotein-Convertase Furin war allerdings nicht einfach zu erreichen. Nur das Einfügen eines flexiblen Linkers mit optimierter Furinerkennungssequenz zwischen den beiden C-Peptiden erlaubte die effiziente Spaltung in monomere Peptide mit hoher antiretroviraler Aktivität. Therapeutisch wirksame Peptidkonzentrationen dieser optimierten iSAVE-Peptide wurden sowohl von transfizierten und transduzierten Zelllinien als auch von primären humanen T-Zellen sezerniert. Nach Freisetzung in den extrazellulären Raum konnten die Peptide nicht nur genmodifizierte sondern auch unbehandelte Nachbarzellen in vitro vor HIV-1 Eintritt und Infektion schützen. Die generierten iSAVE-Peptide bilden damit eine hervorragende Grundlage für die weitere präklinische und klinische Entwicklung eines neuen Gentherapieansatzes zur Behandlung der HIV-Infektion.
The title compound, Cs2Mg(H2P2O7)2·2H2O, is isostructural with the related known isoformular phosphates. The crystal framework consists of corner-sharing MgO6 and H2P2O7 polyhedra, leading to tunnels parallel to the b-axis direction in which Cs+ ions are located. The H2P2O7 unit shows a bent eclipsed conformation. The Mg2+ ion lies on an inversion center. The water molecules form hydrogen bonds to O atoms of two different dihydrogenphosphate ions, which are further hydrogen bonded to symmetry-equivalent dihydrogenphosphate ions. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(P–O) = 0.006 Å; R factor = 0.048; wR factor = 0.125; data-to-parameter ratio = 12.3.
Channelrhodopsin-2, or ChR2, is a light-gated inward rectifying cation channel. Ever since its first characterisation (Nagel et al., 2003), it has been used extensively in the light-activated control of neural cells in culture as well as in living animals like mice, Caenorhabditis elegans and Drosophila melanagaster. Despite its broad application in the field of neuroscience, little is known about the properties of this ion channel. The aim of this thesis is to elucidate the single channel conductance under different conditions using stationary noise analysis on whole cell recordings of a HEK293 cell line that stably expresses the truncated ChR2 (amino acids 1-315), which behaves identically to the full length protein (Nagel et al., 2003). Stationary noise analysis is based on the fact that the ion channel noise due their opening and closing has a characteristic form of a plateau at low frequency points and a following decrease of power with 1/f² in difference power spectra, which are composed of the difference of fast Fourier transformed (FFT) stationary whole-cell recordings with and without illumination. From the parameters yielded by an approximation of the power spectra with a Lorentzian function the single channel conductance can be estimated. The single channel conductance of ChR2 was determined at -60 mV applied for different cations, yielding values of 91 ± 25 fS (Guanidine+), 42 ± 7 fS (Na+), 61 ± 18 fS (Li+) and 37 ± 14 fS (Methylammonium+). With 200 mM Guanidine+ outside of the cells and measurements between 0 mV and -60 mV applied, it could be shown that the inward rectification is still present on the scale of the single channel. Noise Analysis with concentrations between 40 and 200 mM Guanidine+ showed a saturation of the single channel conductance with high Guanidine+ concentrations with a maximal conduction of 129 ± 9 fS (Michaelis Menten approximation: Km = 82 ± 14 mM). Activation Energies of the rate constants k (2πfc, with fc = corner frequency of the Lorentzian function) and koff (1/τoff, with τoff = closing time of the channel at -60 mV) were determined to be 75 ± 23 kJ/mol and 64 ± 11 kJ/mol, respectively, which are similar to the value determined for the Channelrhodopsin-1 closing times (~60 kJ/mol; Nagel et al., 2002). The activation energy of the ChR2 single channel conductance was determined to be 21.2 ± 20.8 kJ/mol, which also is similar to the activation energy of the ChR1 current amplitude (20 kJ/mol; Nagel et al., 2002). The amount of active ChR2 channels in the membrane (160,000 or 226 ChR2/μm²) as well as the single channel current (-7.5 ± 0.6 fA) could be determined by variation of the light intensity (0.05 mW mm-2 to 5.3 mW mm-2). In the course of this thesis, the single channel parameters of the ChR2 mutant H134R were also determined. H134R had been previously published as a “gainof- function” mutant (Nagel et al., 2005a). The increased macroscopic current amplitude of H134R could be explained by an increased lifetime of the channel in comparison to the wildtype ChR2. Within the margin of error both single channel conductances in the presence of 200 mM Guanidine+ of the wildtype (91.1 ± 24.9 fS) and the H134R (89.4 ± 30.7 fS) are the same. In the presence of 200 mM Lithium+ values of 60.6 ± 17.8 fS for the wildtype ChR2 and 50.8 ± 9.6 fS for the H134R mutant were determined. This thesis marks the first in depth analysis of the single channel conductance of ChR2. Using stationary noise analysis the single channel conductance of Channelrhodopsin-1 as well as interesting Channelrhodopsin-2 mutants can also be analysed in the future.
This thesis describes the structural characterization of interactions between biological relevant ribonucleic acid biomacromolecules (RNAs) and selected ligands to optimize the methodologies for the design of pharmacological lead compounds. To achieve this aim, not only the structures of the RNA, the ligand and their complexes need to be known, but also information about the inherent dynamics, especially of the target RNA, are necessary. To determine the structure and dynamics of these molecules and their complexes, liquid state nuclear magnetic resonance spectroscopy (NMR) is a suitable and powerful method. The necessity for these investigations arises from the lack of knowledge in RNA-ligand interactions, e.g. for the development of new medicinal drugs targeting crucial RNA sequences. In the first chapters of this thesis (Chapters II to IV), an introduction into RNA research is given with a focus on RNA structural features (Chapter II), into the interacting molecules, the biology of the specific RNA targets and the further development of their ligands (Chapter III) and into the NMR theory and methodologies used within this thesis (Chapter IV). Chapter II begins with a description of RNA characteristics and functions, placing the focus on the increasing attention that these biomacromolecules have attracted in recent years due to their diverse biological functionalities. This is followed by a detailed description of general structural features of RNA molecules. The biological functions of the RNAs investigated in this thesis (Human immunodeficiency virus PSI- and TAR-RNA and Coxsackievirus B3 Stemloop D in the 5’-cloverleaf element), together with their known structural characteristics are introduced in Chapter III. Furthermore, a description of the investigated ligands is given, focusing on the methods how their affinity and specificity were determined. The introduction is completed in Chapter IV, where the relevant NMR theory and methodologies are explained. First, kinetics and thermodynamics of ligand binding are summarized from an NMR point of view. Subsequently, a detailed description of the resonance assignment procedures for RNAs and peptidic ligands is given. This procedure mainly concentrates on the assignment of the proton resonances, which are essential for the later structure calculation from NMR restraints. The procedure for NMR structure calculation of RNA and its complexes follows with a short introduction into the programs ARIA and HADDOCK. The final part of this chapter explains the relaxation theory and the methodology to extract dynamic information from autocorrelated relaxation rates via the model-free formalism. In the Chapters V to VII of this thesis, the original publications are included and grouped into three topics. Chapter V comprehends the publications on the investigations of HIV PSI-RNA and its hexapeptidic ligand. These three publications[1-3] focus on the characterization of the ligand and its binding properties, its structure and the optimization of its composition aiming to improve its usage for further spectroscopic investigations.
The five-membered ring of the title compound, C10H14NO, is almost planar [mean deviation from best plane = 0.006 (1) Å]. The N-O bond is in the plane of the five-membered ring. The molecule is positioned about a pseudo-mirror plane at y = 0.375. In the crystal, molecules are connected by intermolecular C-H...O contacts into layers parallel to (010). Key indicators: single-crystal X-ray study; T = 167 K; mean σ(C–C) = 0.002 Å; R factor = 0.062; wR factor = 0.157; data-to-parameter ratio = 27.3.
Lentiviral vectors mediate gene transfer into dividing and most non-dividing cells. Thereby, they stably integrate the transgene into the host cell genome. For this reason, lentiviral vectors are a promising tool for gene therapy. However, safety and efficiency of lentiviral mediated gene transfer still needs to be optimised. Ideally, cell entry should be restricted to the cell population relevant for a particular therapeutic application. Furthermore, lentiviral vectors able to transduce quiescent lymphocytes are desirable. Although many approaches were followed to engineer retroviral envelope proteins, an effective and universally applicable system for retargeting of lentiviral cell entry is still not available. Just before the experimental work of this thesis was started, retargeting of measles virus (MV) cell entry was achieved. This virus has two types of envelope glycoproteins, the hemagglutinin (H) protein responsible for receptor recognition and the fusion (F) protein mediating membrane fusion. For retargeting, the H protein was mutated in its interaction sites for the native MV receptors and a ligand or a single-chain antibody (scAb) was fused to its ectodomain. It was hypothesised that the retargeting system of MV can be transferred to lentiviral vectors by pseudotyping human immunodeficiency virus-1 (HIV-1) derived vector particles with the MV glycoproteins. As the unmodified MV glycoproteins did not pseudotype HIV vectors, two F and 15 H protein variants carrying stepwise truncations or amino acid (aa) exchanges in their cytoplasmic tails were screened for their ability to form MV-HIV pseudotypes. The combinations Hcd18/Fcd30, Hcd19/Fcd30 and Hcd24+4A/Fcd30 led to most efficient pseudotype formation with titers above 10exp6 transducing units /ml, using concentrated particles. The F cytoplasmic tail was truncated by 30 aa and the H cytoplasmic tail was truncated by 18, 19 or 24 residues with four added alanines after the start methionine in the latter case. Western blot analysis indicated that particle incorporation of the MV glycoproteins was enhanced upon truncation of their cytoplasmic tails. With the MV-HIV vectors high titers on different cell lines expressing one or both MV receptors were obtained, whereas MV receptor-negative cells remained untransduced. Titers were enhanced using an optimal H to F plasmid ratio (1:7) during vector particle production. Based on the described pseudotyping with the MV glycoprotein variants, HIV vectors retargeted to the epidermal growth factor receptor (EGFR) or the B cell surface marker CD20 were generated. For the production of the retargeted vectors MVaEGFR-HIV and MVaCD20-HIV, Fcd30 together with a native receptor blind Hcd18 protein, displaying at its ectodomain either the ligand EGF or a scAb directed against CD20 were used. With these vectors, gene transfer into target receptor-positive cells was several orders of magnitude more efficient than into control cells. The almost complete absence of background transduction of non-target cells was e.g. demonstrated in mixed cell populations, where the CD20-targeting vector selectively eliminated CD20-positive cells upon suicide gene transfer. Remarkably, transduction of activated primary human CD20-positive B cells was much more efficient with the MVaCD20-HIV vector than with the standard pseudotype vector VSV-G-HIV. Even more surprisingly, MVaCD20-HIV vectors were able to transduce quiescent primary human B cells, which until then had been resistant towards lentiviral gene transfer. The most critical step during the production of MV-HIV pseudotypes was the identification of H cytoplasmic tail mutants that allowed pseudotyping while retaining the fusion helper function. In contrast to previously inefficient targeting strategies, the reason for the success of this novel targeting system must be based on the separation of the receptor recognition and fusion functions onto two different proteins. Furthermore, with the CD20-targeting vector transduction of quiescent B cells was demonstrated for the first time. Own data and literature data suggest that CD20 binding and hyper-cross-linking by the vector particles results in calcium influx and thus activation of quiescent B cells. Alternatively this feature may be based on a residual binding activity of the MV glycoproteins to the native MV receptors that is insufficient for entry but induces cytoskeleton rearrangements dissolving the post-entry block of HIV vectors. Hence, in this thesis efficient retargeting of lentiviral vectors and transduction of quiescent cells was combined. This novel targeting strategy should be easily adaptable to many other target molecules by extending the modified MV H protein with appropriate specific domains or scAbs. It should now be possible to tailor lentiviral vectors for highly selective gene transfer into any desired target cell population with an unprecedented degree of efficiency.
A solid-supported membrane (SSM) is an alkanethiol/lipid hybrid membrane with comparable lipid mobility, conductivity, and capacitance than a black lipid membrane (BLM). However, mechanical perturbations, which usually destroy a BLM, do not influence the life-time of a SSM, which is mechanically so stable that solutions may be rapidly exchanged at its surface. This key property has been utilized in this thesis to characterize electrophysiologically two bacterial secondary active transporters (MelB and LacY) as well as to investigate the specific interactions between ions and lipid membranes. These three different projects are summarized below: (1) The properties of lipid membranes, which represent the most important biological interface between intracellular and extracellular compartments, are essentially modulated by the ionic composition of the surrounding aqueous medium. To investigate specific interactions between ions and lipid membranes, solutions of different ionic composition were exchanged at the surface of a SSM through a flow system. This solution exchange resulted in charge translocations that were interpreted in terms of binding of the ions to the lipid headgroups at the SSM surface. We found that chaotropic anions and kosmotropic cations are attracted to the membrane independent of the membrane composition. In particular, the same behaviour was found for lipid headgroups bearing no charge like monoolein. This general trend is modulated by the electrostatic interaction of the ions with the lipid headgroup charge. Our experimental results are in agreement with recent molecular dynamic simulations of PC membranes. (2) Rapid solution exchange on a solid-supported membrane (SSM) is investigated using fluidic structures and a solid-supported membrane in a wall jet geometry. The flow was analyzed with a new technique based on specific ion interactions with the surface combined with an electrical measurement. The critical parameters affecting the time course of the solution exchange and the transfer function describing the time resolution of the SSM system were determined. The experimental data indicate that the solution transport follows a plug flow geometry while the rise of the surface concentration can be approximated by Hagen Poiseuille flow with ideal mixing at the surface of the SSM. Using an improved cuvette design a solution exchange as fast as 2 ms was achieved at the surface of a solid supported membrane. As an application of the technique the rate constant of a fast electrogenic reaction in the melibiose permease MelB, a bacterial (Escherichia coli) sugar transporter, is determined. For comparison, the kinetics of a conformational transition of the same transporter was measured using stopped-flow tryptophan fluorescence spectroscopy. The relaxation time constant obtained for the charge displacement agrees with that determined in the stopped-flow experiments. This supports the previous proposition that upon sugar binding MelB undergoes an electrogenic conformational transition with a rate constant of k ~ 250 s-1. (3) Electrogenic events due to activity of wild-type lactose permease from Escherichia coli (LacY) were investigated with proteoliposomes containing purified LacY adsorbed on a solid-supported membrane electrode. Downhill sugar/H+ symport into the proteoliposomes generates transient currents. Studies at different lipid to protein ratios and at different pH values, as well as inactivation by N-ethylmaleimide, show that the currents are due specifically to the activity of LacY. From analysis of the currents under different conditions and comparison with biochemical data, it is apparent that the predominant electrogenic event in downhill sugar/H+ symport is H+ release. In contrast, LacY mutants E325A and C154G, which bind ligand normally but are severely defective with respect to lactose/H+ symport, exhibit a minor electrogenic event upon addition of LacY-specific substrates, representing only 6% of the total charge displacement of the wild-type. This activity is due either to substrate binding per se or to a conformational transition following substrate binding. We propose that turnover of LacY involves at least two electrogenic reactions: (i) a minor reaction that occurs upon sugar binding and is due to a conformational transition in LacY; and (ii) a major reaction due to cytoplasmic release of H+ during downhill sugar/H+ symport, which is the limiting step for this mode of transport.
Die genetische Information innerhalb einer Zelle kodiert nicht nur die spezifische Struktur und Funktion von Proteinen, sondern auch die Entstehung dieser Struktur durch den Prozess der Proteinfaltung. Aus zahlreichen experimentellen und theoretischen Studien wurde offensichtlich, dass Faltung und Entfaltung von Proteinen in vielen zellulären Prozessen eine entscheidende Rolle spielt. Diese Beobachtungen führten zu der zwangsläufigen Erkenntnis, dass das Unvermögen von Proteinen sich korrekt zu falten oder korrekt gefaltet zu bleiben der Auslöser für viele verschiedene Arten biologischen Fehlverhaltens ist und infolgedessen unterschiedliche Krankheitsformen mit sich bringt. Die strukturelle und dynamische Charakterisierung von nicht-nativen Proteinzuständen ist daher eine wichtige Grundlage einerseits zur Erforschung der krankheitsauslösenden Prozesse, andererseits aber auch zum generellen Verständnis der Proteinfaltung an sich. Allein hochauflösende NMR-Experimente können detaillierte Informationen über Struktur und Dynamiken solcher Zustände auf atomarer Ebene liefern. In der vorliegenden Arbeit wurde die C-terminale Domäne des humanen Prionenproteins [hPrP(121-230)] unter Bedingungen untersucht, bei denen dieses Protein permanent in einem nicht-nativen Zustand vorliegt. Dies wurde durch die Verwendung einer hochmolaren Harnstofflösung (8 M, pH 2,0) erreicht. Zur Untersuchung dieses nicht-nativen Zustands mittels NMR wurde das PrP(121-230) in E.coli-Zellen isotopenmarkiert exprimiert und in Mengen von einigen Milligramm aufgereinigt. Nach der sequentiellen Zuordnung der 13Ca-, 13Cb-, 13CO-, 1Ha- und 1HN-Resonanzen konnte aus den sekundären chemischen Verschiebungen auf Regionen innerhalb der Polypeptidkette geschlossen werden, die erhöhte b-faltblattartige Konformationsanteile enthalten. Heteronukleare Relaxa-tionsraten wurden zur Untersuchung der konformationellen Dynamik herangezogen. Auch hier konnten Regionen verminderter Mobilität (hydrophobe Cluster) nachgewiesen werden, die mit den zuvor entdeckten Bereichen aus der Analyse der chemischen Verschiebungen übereinstimmten. Die Messung von R1r-Relaxationsraten erbrachte zudem keine Hinweise auf konformationellen Austausch auf der μs-ms-Zeitskala. Weiterhin wurde der Einfluss der Disulfidbrücke auf Konformation und Dynamik des hPrP(121-230) untersucht. Dies wurde durch die Reduktion der Disulfidbrücke und die anschließende Methylierung der beiden Cysteine erreicht. Im Gegensatz zu der Analyse der chemischen Verschiebungen zeigte die Auswertung der konformationellen Dynamiken dramatische Unterschiede zwischen den oxidierten und reduzierten Zuständen des hPrP(121-230). Insbesondere im Bereich um die beiden Cysteine konnten große Unterschiede festgestellt werden; im reduzierten Zustand führte die zusätzliche Bewegungsfreiheit zu erhöhten Dynamiken und gab den Blick auf zusätzliche hydrophobe Bereiche frei, die im oxidierten Zustand durch hohe Relaxationsraten verdeckt geblieben waren. Ein weiterer wesentlicher Unterschied zwischen dem oxidierten und dem reduzierten Zustand des hPrP(121-230), der mit Hilfe des Fluoreszenzfarbstoffes Thioflavin T beschrieben werden konnte, bestand in der Fähigkeit Fibrillen auszubilden; während das oxidierte hPrP diese Eigenschaft besaß, führte der Verlust der intakten Disulfidbrücke zu einer Proteinkonformation, die nicht mehr zur Bildung von fibrillären Strukturen im Stande war. Im weiteren Verlauf der Arbeit wurden die strukturellen, dynamischen und kinetischen Charakteristika des hPrP(121-230) mit denen des murinen Prionenproteins mPrP(121-232) sowohl im oxidierten als auch im reduzierten Zustand verglichen. Auf der Basis der chemischen Verschiebungen und der heteronuklearen Relaxationsdaten konnte gezeigt werden, dass beide Proteine in den jeweiligen komplementären Zuständen (oxidiert bzw. reduziert) sehr ähnliche strukturelle und dynamische Eigenschaften besitzen. Aufgrund einiger Aminosäureaustausche in den beiden Proteinsequenzen kommt es jedoch zu kleineren Unterschieden, die jedoch nur in lokalen Bereichen der Polypeptidkette zum Tragen kommen. Somit konnte gezeigt werden, dass das mPrP(121-232) als ein geeignetes Modellsystem für das humane Prionenprotein dienen kann. Abschließend wurde der Einfluss von insgesamt zwölf verschiedenen Punktmutationen, die beim Menschen mit Prionenerkrankungen assoziiert sind, auf das Aggregationsverhalten des mPrP(121-232) untersucht. Dabei fiel zum einen auf, dass die Aggregation mit zunehmender Proteinkonzentration schneller verlief, zum anderen aber auch, dass es insbesondere bei geringen Proteinkonzentrationen zu signifikanten Unterschieden in der Aggregationsgeschwindigkeit der verschiedenen mutierten Proteinkonstrukte kommt. Zusammenfassend ist festzustellen, dass in dieser Arbeit strukturelle und dynamische Eigenschaften der nicht-nativen Zustände von hPrP(121-230) und mPrP(121-232) sowohl im oxidierten als auch im reduzierten Zustand durch die Verwendung von NMRspektroskopischen Experimenten charakterisiert werden konnten. Zudem konnte mit Hilfe von Fluoreszenzspektroskopie das Aggregationsverhalten der einzelnen Proteinzustände beschrieben und in einem ersten Schritt der Einfluss von verschiedenen Punktmutationen auf die Aggregationsgeschwindigkeit ermittelt werden.
Na+/H+ antiporters are ubiquitous membrane proteins involved in ion homeostasis and pH sensing. The amino acid sequence of one such antiporter, MjNhaP1, from Methanococcus jannaschii, shows a significant homology to eukaryotic sodium proton exchangers like NHE1 from Homo sapiens and SOS1 of Arabidopsis thaliana than to the well-characterized Escherichia coli NhaA or NhaB. MjNhaP1 shows activity at acidic pH unlike NhaA, which is active at basic pH. 13 transmembrane helices have been predicted to be present in NhaP1. A projection map, calculated by Cryo-EM of 2D crystals of MjNhaP1 grown at pH 4, showed it to be a dimer containing elongated densities in the centre of the dimer and a cluster of density peaks on either side of the dimer core (Vinothkumar et al., 2005). Incubation of 2D crystals at pH 8 on the EM grid resulted in well-defined conformational changes, clearly evident in a difference map as a major change in density distribution within the helix bundle (Vinothkumar et al., 2005). The aim of this dissertation is to understand the working mechanism of MjNhaP1 by determining its three-dimensional structure. The aim was initially approached by structure determination by X-ray crystallography. The limitation for this method was the low expression yield, which was 0.5–0.7mg/ml (Vinothkumar et al., 2005). After various optimization trials, the expression yield of the recombinant protein could be elevated to 2-2.5mg of pure protein per litre of culture by the method of autoinduction (Studier et al., 2005). To obtain well diffracting 3D crystals, purification conditions (Vinothkumar et al., 2005) were modified. 3D crystals were obtained under various conditions, which has so far not diffracted X-Ray beyond 8Å. Parallely, optimization of parameters (Vinothkumar et al., 2005) for 2D crystals formation was carried out. A combination of 1% DDM used for lipid solubilization, and 1% OG in the buffer of the purified protein produced 1-2 μm wide tubular 2D crystals of NhaP1. This batch of crystal proved to be the optimal for data collection at higher tilt angle with the electron microscope. A 3D map showed p22121 symmetry and revealed a tight dimer with an oval shape. The region in the central part of the dimer is composed of several tilted helices forming an interface between both monomers. On either side of the dimer interface, a group of six tightly packed helices form a bundle. This bundle contains three straight helices in the centre of the monomer and three helices in the periphery. Comparison of the structures of E.coli NhaA and M. jannaschii NhaP1 show substantial differences in length and slope of corresponding helices between both antiporters. A 3D model of NhaP1 based on the 3D map revealed 13 helices, which has been named as A-M to distinguish it from the NhaA helices. Overlaying the X-ray structure onto the 3D map revealed that the disrupted helices IV and XI of NhaA superimpose two central helices at similar position in the 3D map of NhaP1. The disrupted helices IV and XI in the X-ray structure of NhaA have been proposed as the putative ion-binding and translocation site (Hunte C et al, 2005; Arkin IT et al, 2007; Screpanti & Hunte (2007). This motif appears to be present also in NhaP1, as suggested by the close fit of NhaA helices IV and XI on the putative helices E and L of the NhaP1 model. These two putative helices E and L in NhaP1 contain the highly conserved TDP and GPRVVP motif, which are crucial for antiporter activity (Hellmer et al., 2002, Hellmer et al., 2003). In the overlay, helix V of NhaA containing the two essential, conserved aspartates D163 and D164 fits the density of the putative helix F of NhaP1, which contains the conserved motif FNDP. The homologous D161 in the FNDP motif of NhaP1 is essential for transport activity as show by mutagenesis (Hellmer at al., 2003). Significant differences are visible in the region of the dimer interface of the 3D map of NhaP1 occupied by helices VI, VII, and VIII in NhaA. This region shows an extra helical density (A) in the 3D map of NhaP1. By alignment of MjNhaP1 sequence with the amino acid sequences of several Na+/H+ exchangers, it was evident that the additional helix (A) is located in the N terminus of NhaP1. In our sequence alignment, a putative hydrophobic segment corresponding to this additional helix A is present in other archaeal and eukaryotic antiporters but not in any of the bacterial ones. The N-terminus of the human Na+/H+ exchanger NHE1 has been predicted to contain a highly hydrophobic signal peptide. This indicates the probability of the N-terminal helix A of NhaP1 to be an uncleaved signal peptide. Besides being a signal sequence targeting NhaP1 to the membrane, the map suggests that this helix might be involved in the formation of dimer contacts between both monomers. A gene duplication event is evident in the 3D map of NhaP1, as not only the helices D, E, F and K, L, M are related by an inverted repeat but also the helices B, C and I, J are related. We present here the three-dimensional architecture of a Na+/H+ antiporter from archaea. The presence of the 13th helix suggests the location of the N-terminus to be located in the cytosol and the C-terminus in the periplasm. This would orient NhaP1 in an inverted manner in the membrane in comparison to NhaA. Further structural information at higher resolution and biochemical and biophysical investigations are required to confirm the topology.
Im Rahmen dieser Arbeit wurde das Protein CtaG aus Paracoccus denitrificans eingehend charakterisiert. Es wurde überprüft, ob dieses 21 kDa große Membranprotein als Kupferchaperon und Assemblierungsfaktor für die Untereinheit I der Cytochrom c Oxidase, das heißt für die Biogenese des CuB-Zentrums, in Frage kommt. Eine bioinformatische Analyse zeigte zunächst, dass CtaG, ein Homolog des eukaryotischen Proteins Cox11, zu den am stärksten konservierten Assemblierungsfaktoren der Cytochrom c Oxidase gehört. Interessanterweise sind diese Proteine alle an der Biogenese der redoxaktiven Metallzentren beteiligt, und nur sie sind auch in Paracoccus denitrificans konserviert. Somit stellt Paracoccus ein ideales Modellsystem dar, um die essentiellen Schritte der Biogenese der Cytochrom c Oxidase zu untersuchen. Ein lösliches Fragment von CtaG (CtaGLF) wurde heterolog in E. coli exprimiert und mit Hilfe eines spaltbaren His6-tags aufgereinigt. Es wurde ein Protokoll entwickelt, mit dessen Hilfe die Aggregation des löslichen Fragments minimiert und das Protein in hochreiner, aggregatfreier Form isoliert werden kann. Rekonstitutionsversuche zeigten, dass CtaGLF ein spezifisch Cu(I)-bindendes Protein ist. Nach der heterologen Expression in E. coli ist CtaGLF kofaktorfrei. Ein Protokoll zur in vitro Rekonstitution mit Kupferionen wurde entwickelt, mit welchem ein stöchiometrisches Kupfer/Protein-Verhältnis erreicht wird. Gelfiltrations- und ICP-MS-Analysen zeigten, dass CtaGLF Kupferionen ausschließlich als Dimer bindet. Rekonstitutionen bei denen Cu(I), Cu(II), Co(II), Fe(II), Mn(II), Mg(II) und Ni(II) sowohl einzeln als auch simultan angeboten wurden, führten zwar zu wenig reproduzierbaren absoluten Stöchiometrien, bestätigten aber, dass CtaGLF bevorzugt Cu(I) bindet. Mutagenesestudien bewiesen einerseits, dass drei Cysteinreste maßgeblich für die Kupferbindung verantwortlich sind und deuteten andererseits darauf hin, dass zwei identische, punktsymmetrische Bindungsstellen des CtaGLF-Dimers die Kupferionen koordinieren. Mit Hilfe einer Multiseq-Analyse wurden zunächst hochkonservierte Oberflächenreste von CtaG identifiziert. Eine Auswahl dieser Aminosäuren wurde per gerichteter Mutagenese ersetzt und der Effekt dieser Mutationen auf Stöchiometrie, Affinität und Dimerisierung von CtaGLF wurde untersucht. Die Affinitäten wurden dabei mit Hilfe von Kompetitionsexperimenten mit dem Cu(I)-spezifischen Chelator BCA analysiert. Insgesamt vier mögliche Szenarien für die Kupferbindung von CtaG wurden postuliert und anhand der Datenlage diskutiert. Das Szenario III, welches die Datenlage am besten zu erklären vermag, sieht eine trigonale Koordination der Kupferionen vor, an welcher die Cysteine des hochkonservierten CFCF-Motivs einer Polypeptidkette ein gemeinsames Koordinationsfeld mit dem nahe der Transmembranhelix gelegenen Cystein 38 der jeweils anderen Polypeptidkette bilden. Mit Hilfe von UV/Vis-spektroskopischen Messungen wurde gezeigt, dass die Bindung von Kupferionen an CtaGLF zu einer Absorption bei 358 nm führt. Diese kann mit einem Extinktionskoeffizienten von E delta 358 nm = 936 M-1cm-1 zur Beobachtung des Kupfertransfers von CtaGLF auf einen Akzeptor verwendet werden. Um eine Beteiligung von CtaG bei der Insertion des CuB-Ions in die Untereinheit I der Cytochrom c Oxidase (UE I) zu beweisen, wurden zwei Arbeitshypothesen aufgestellt und empirisch untersucht: Die erste Hypothese geht von einer posttranslationalen Kupferinsertion aus. Die UE I wird laut dieser Hypothese zunächst vollständig exprimiert und in die Membran inseriert, bevor das Kupferion über einen Kanal in das 13 Å unterhalb der Membranoberfläche gelegene aktive Zentrum der Oxidase inseriert wird. Drei Ansätze wurden zur empirischen Überprüfung dieser Hypothese verfolgt: Erstens wurde ein in vitro Transferassay etabliert, bei dem heterolog exprimierte, kofaktorfreie UE I als Akzeptor für Kupferionen von CtaGLF diente. Zweitens wurden bioinformatische Analysen durchgeführt um potentielle Interaktionsflächen zwischen CtaG und UE I zu identifizieren. Und drittens wurde mit Hilfe koaffinitätschromatographischer Versuche eine Interaktion zwischen CtaG und kofaktorfreier UE I untersucht. Die Ergebnisse dieser Untersuchungen sprechen allesamt gegen eine posttranslationale CtaG-vermittelte Insertion von Kupferionen in die UE I der Cytochrom c Oxidase. Die zweite Hypothese geht davon aus, dass die prosthetischen Häm- und Kupfergruppen bereits vor der vollständigen Membraninsertion, das heißt kotranslational auf die UE I übertragen werden. Um diese Hypothese zu überprüfen, wurden ebenfalls mehrere Ansätze verfolgt: Erstens wurde die UE I in Gegenwart und Abwesenheit von CtaG heterolog in E. coli exprimiert und anschließend aufgereinigt. In Abwesenheit weiterer Assemblierungsfaktoren ist CtaG in diesem System nicht dazu in der Lage den Kupfergehalt der UE I zu erhöhen. Zweitens wurde mit Hilfe von Blau-Nativ Gelen und Crosslinking-Versuchen im nativen Wirt Paracoccus denitrificans nach einer Wechselwirkung zwischen CtaG und UE I gesucht. Insbesondere die Ergebnisse der Crosslinking-Versuche deuten auf einen Assemblierungskomplex hin, der sowohl CtaG als auch die UE I der Cytochrom c Oxidase enthält. In einem dritten Ansatz wurde ein zellfreies Expressionssystem etabliert, welches direkten Zugang zu naszierenden Ketten der UE I ermöglicht. Dieses System erscheint vielversprechend und dient derzeit als Basis für weitere Biogenesestudien. Die Ergebnisse der vorliegenden Arbeit zeigen, dass CtaG ein spezifisch Cu(I)-bindendes Protein ist, das im Zuge der Kupferbindung dimerisiert und in Paraoccus denitrificans in einem hochmolekularen Komplex gemeinsam mit UE I vorliegt. Die gegenwärtige Datenlage spricht dafür, dass CtaG als Kupferchaperon an der Biogenese der Cytochrom c Oxidase beteiligt ist und das CuB-Ion in einem kotranslationalen Mechanismus in die UE I der Cytochrom c Oxidase inseriert.
The membrane-bound heterotrimeric nitrate reductase A (NarGHI) catalyzes the oxidation of quinols in the cytoplasmic membrane of Escherichia coli and reduces nitrate to nitrite in the cytoplasm. The enzyme strongly stabilizes a menasemiquinone intermediate at a quinol oxidation site (Q(D)) located in the vicinity of the distal heme b(D). Here molecular details of the interaction between the semiquinone radical and the protein environment have been provided using advanced multifrequency pulsed EPR methods. (14)N and (15)N ESEEM and HYSCORE measurements carried out at X-band ( approximately 9.7 GHz) on the wild-type enzyme or the enzyme uniformly labeled with (15)N nuclei reveal an interaction between the semiquinone and a single nitrogen nucleus. The isotropic hyperfine coupling constant A(iso)((14)N) approximately 0.8 MHz shows that it occurs via an H-bond to one of the quinone carbonyl group. Using (14)N ESEEM and HYSCORE spectroscopies at a lower frequency (S-band, approximately 3.4 GHz), the (14)N nuclear quadrupolar parameters of the interacting nitrogen nucleus (kappa = 0.49, eta = 0.50) were determined and correspond to those of a histidine N(delta), assigned to the heme b(D) ligand His-66 residue. Moreover S-band (15)N ESEEM spectra enabled us to directly measure the anisotropic part of the nitrogen hyperfine interaction (T((15)N) = 0.16 MHz). A distance of approximately 2.2 Abetween the carbonyl oxygen and the nitrogen could then be calculated. Mechanistic implications of these results are discussed in the context of the peculiar properties of the menasemiquinone intermediate stabilized at the Q(D) site of NarGHI.
Flavins are employed to transform physical input into biological output signals. In this function, flavins catalyze a variety of light-induced reactions and redox processes. However, nature also provides flavoproteins with the ability to uncouple the mediation of signals. Such proteins are the riboflavin-binding proteins (RfBPs) with their function to store riboflavin for fast delivery of FMN and FAD. Here we present in vitro and in vivo data showing that the recently discovered archaeal dodecin is an RfBP, and we reveal that riboflavin storage is not restricted to eukaryotes. However, the function of the prokaryotic RfBP dodecin seems to be adapted to the requirement of a monocellular organism. While in eukaryotes RfBPs are involved in trafficking riboflavin, and dodecin is responsible for the flavin homeostasis of the cell. Although only 68 amino acids in length, dodecin is of high functional versatility in neutralizing riboflavin to protect the cellular environment from uncontrolled flavin reactivity. Besides the predominant ultrafast quenching of excited states, dodecin prevents light-induced riboflavin reactivity by the selective degradation of riboflavin to lumichrome. Coordinated with the high affinity for lumichrome, the directed degradation reaction is neutral to the cellular environment and provides an alternative pathway for suppressing uncontrolled riboflavin reactivity. Intriguingly, the different structural and functional properties of a homologous bacterial dodecin suggest that dodecin has different roles in different kingdoms of life.
In the production of integrated circuits (ICs), photolithography plays a key role in wafer structuring. The basic principle of photolithography is the selective processing of areas (etching, implantation, metallisation etc.) while the others are covered and therefore protected by the resist. After each process step the resist, now modified, has to be removed. In the history of semiconductor manufacturing this has been accomplished with a mixture of H2SO4 and H2O2, H2SO4 and O3 or a plasma etch. As the structure sizes decreased they reached a stage where they had to be exposed to light of shorter wavelengths for the photolithography, going from i-line (365 nm) to DUV (248 nm and 193 nm). This change in wavelength now requires new resists and therewith new stripping methods. Beside the changes in the resist the finer structures are also more sensitive to damages caused by the resist strip. Along with this the demand for cost reduction and environment-friendliness poses a big challenge for modern resist stripping. In this study ozone in deionised water (DI/O3) was the basic chemistry investigated as it is cost efficient in production and disposal as well as environment friendly. Furthermore it is a chemistry known to cause no damage to the wafers. DI/O3 has been successfully applied to strip i-line resists. The challenge now is to find ways and means to make DI/O3 strip even highly implanted DUV resists which currently can only be removed by a plasma etch. To achieve this a detailed understanding of the behaviour of ozone in DI water and the influence of factors both chemical and physical on the stripping efficiency at the different stages in the process is necessary. Along with this, methods which enable the elucidation of resist structures and the changes they undergo during the process of photolithography as well as during the ozone strip have to be developed. This will enable us to understand the mechanisms involved and hence, ideally, develop ozone-based stripping solutions customized for each resist and process step. For this purpose the ozone decomposition in DI water with and without additives was studied via UV-Vis spectroscopy. Radicals generated within the ozone decomposition were trapped and quantified, the resists were studied directly on the wafer with IR and Raman spectroscopy and stripped with DI/O3-mixtures and different setups to find optimum conditions for a complete and damage free resist strip. UV-Vis spectroscopy at 260 nm was used to study ozone decomposition and the factors, both chemical and physical, which influence it. These factors are pH, different additives at the same pH, temperature and mixing of the solution. For the radical determination trapping reactions with MeOH and DMSO both forming CH2O which is further converted to DDL as the detectable species were compared with a variation of the classical iodometric titration acting as an absolute method without the need of calibration. IR spectroscopy proved to be a suitable method for the structural characterisation of the resists and the tracking of the changes undergone during the various processing steps as well as the ozone based stripping. For the stripping with DI/O3 IR spectroscopy delivered well-defined spectra. These displayed significant peak changes which support the assumption of classical ozonolysis as the decomposition mechanism for the unimplanted resist. For the study of the resist crust originating from ion implantation IR was fundamentally unsuitable and was replaced by Raman spectroscopy and microscopy. Raman spectra showed the crust to be of a highly carbon containing structure. Regrettably, the peak assignable to the crust was too broad for the exact composition of the crust to be determined. The wavelength region of the peak corresponds to that of peaks of glassy carbon and highly ordered and conventional graphite. Such a broad peak suggests that the structure of the crust is not uniform but contains more than one carbon modification. As the purpose of all these studies is to enable or improve DI/O3 based resist stripping on unimplanted as well as high-dose implanted resists the removal efficiency of DI/O3 spiked with different additives that alter the pH was studied. For these unimplanted resists the maximum efficiency could be achieved at pH = 5 – 7. Lowering or increasing the pH beyond this range gave poor results. The stripping of highly implanted resists could be achieved only at harsh conditions with a high pH-level of 12 - 13 with a narrow process window showing no stripping at lower pHs and severe damages at higher levels. The principle application of DI/O3 stripping chemistry could be proved but the currently required process time unfortunatelly is too long for commercial application and needs further optimisation.
Tumoren epithelialen Ursprungs weisen häufig eine vermehrte Expression und/oder Mutationen des epidermalen Wachstumsfaktor-Rezeptors (EGFR) auf. Durch die übermäßig starke bzw. permanente Vermittlung von Überlebens- und Proliferationssignalen an die betroffene Zelle trägt dies direkt zum Voranschreiten der Tumorerkrankung bei. Für eine Reihe von Tumorentitäten ist bekannt, dass eine abnorme Expression von EGFR mit einer schlechteren Prognose für den Krankheitsverlauf und die mittlere Überlebenszeit betroffener Krebspatienten korreliert. Begleitend zur systemischen Chemotherapie solcher Tumoren wird eine gerichtete Therapie zur Eindämmung der EGFR-vermittelten Signaltransduktion durch den Einsatz von Tyrosinkinase-Inhibitoren (TKI) oder EGFR-spezifischer monoklonaler Antikörper (mAb) erzielt. Bei der therapeutischen Anwendung monoklonaler anti-EGFR Antikörper wurden in einigen Fällen lediglich milde Nebenwirkungen wie z.B. Hautausschläge beobachtet, wobei das Auftreten dieser Effekte mit dem Therapieerfolg korrelierte. Eine Reihe von monoklonalen Antikörpern, die gegen ErbB Rezeptor-Tyrosinkinasen gerichtet sind, sind mittlerweile zur Tumortherapie zugelassen, darunter der chimäre anti-EGFR Antikörper Cetuximab (Erbitux®, ImClone/BMS/Merck) zur Behandlung von metastasierenden Kolonkarzinomen sowie Karzinomen des Kopf- und Halsbereichs, der humane anti-EGFR Antikörper Panitumumab (Vectibix®, Amgen) bei metastasierenden Kolonkarzinomen, und der humanisierte anti-ErbB2 Antikörper Trastuzumab (Herceptin®, Genentech/Roche) bei Brustkrebs. Weitere Antikörper befinden sich derzeit in fortgeschrittenen Phasen der klinischen Entwicklung, darunter der humanisierte anti-EGFR Antikörper Matuzumab (Merck/Takeda). Klinische Daten zeigen, dass Patienten mit EGFR positiven Tumoren, die gegenüber etablierter Chemotherapie resistent sind, von der Behandlung mit anti-EGFR Antikörpern profitieren. Durch aktivierte EGF-Rezeptoren induzierte mitogene Signale werden vermindert bzw. blockiert, indem die Antikörper mit hoher Affinität an ErbB Rezeptoren auf der Zelloberfläche binden und die Ligandenbindung bzw. die Dimerisierung verhindern, die zur Bildung aktivierter Rezeptor Dimere nötig ist. Auf diese Weise wird die mitogene Signalübertragung aktivierter ErbB-Rezeptor Dimere verhindert und die Proliferation der Tumorzelle wird verlangsamt oder kommt zum Stillstand. Es gibt Hinweise, dass darüber hinaus sekundäre Effektormechanismen des Immunsystems wie die antikörperabhängige zellvermittelte Zytotoxizität (ADCC) oder die komplementabhängige Zytotoxizität (CDC) gegen Antikörper-markierte Tumorzellen die anti-tumorale Wirksamkeit dieser Antikörper noch verstärken. Die lebensverlängernde Wirkung der Behandlung mit diesen Antikörpern ist ein Beispiel für die erfolgreiche Anwendung einer zielgerichteten Krebstherapie durch passive Immuntherapie. Zu Beginn dieser Arbeit waren die genauen Bindungsstellen der therapeutischen anti-EGFR Antikörper Cetuximab und Matuzumab noch unbekannt. Die Kenntnis der Lage der Epitope auf dem EGFR Molekül könnte wichtige Hinweise zur Aufklärung der Wirkungsmechanismen dieser Antikörper liefern und Ansätze zur weiteren Optimierung dieser Therapeutika aufzeigen. Aus vorangegangenen Experimenten war bekannt, dass Cetuximab und Matuzumab Epitope auf dem EGFR erkennen, die eine intakte Raumstruktur des Rezeptors voraussetzen. Diese Beobachtungen konnten in dieser Arbeit bestätigt werden, ferner konnte die Lage der Epitope auf die EGFR Ektodomäne III/L2 eingegrenzt werden. Da sowohl Cetuximab als auch Matuzumab nicht-lineare, konformationelle Epitope erkennen, wurde eine Variante der Phage Display Methode zur Identifizierung von Peptiden gewählt, die mit den hypervariablen Regionen (CDR) dieser Antikörper interagieren, welche die Bindungsspezifität der Antikörper vermitteln. Ziel dieser Experimente war die Identifizierung von Peptiden, welche die konformationellen Epitope von Cetuximab bzw. Matuzumab in linearer bzw. zyklisch restringierter Form nachbilden. Die Aminosäuresequenzen solcher sogenannter Mimotope könnten zur Identifizierung entsprechender Oberflächenstrukturen am EGFR Molekül herangezogen werden. In der vorliegenden Arbeit wurden aus kommerziell erhältlichen Bibliotheken genetisch modifizierter M13 Bakteriophagen, die randomisierte lineare bzw. zyklische Peptide als N-terminale Fusion am Oberflächenprotein pIII exponieren (M13KE), unter Anwendung der „Delayed Infectivity Panning“ (DIP) Methode Peptide angereichert, die von Cetuximab bzw. Maztuzumab erkannt werden. Zur Anreicherung von M13KE Bakteriophagen mit CDR-spezifischen Fusionspeptiden mittels DIP wurde zunächst ein „single-chain“ Antikörperfragment aus der cDNA von Matuzumab konstruiert und in den bakteriellen Expressionsvektor pIB-Tx kloniert. Mit dem resultierenden Konstrukt pIB-Tx-scFv(E72K) bzw. dem bereits vorhandenen analogen Konstrukt pIB-Tx-scFv(225), welches das „single-chain“ Antikörperfragment von Cetuximab enthält, wurden E. coli HB101 Bakterien transformiert, um die bakterielle Oberflächenexpression dieser Antikörperfragmente zum Einsatz in DIP Experimenten zu erreichen. In alternierenden positiven und negativen Selektionsrunden wurden unter Einsatz dieser scFv-exprimierenden E. coli HB101 Bakterien in Biopanning Experimenten Phagen mit solchen Fusionspeptiden angereichert, die selektiv an die „single-chain“ Antikörperfragmente von Cetuximab bzw. Matuzumab binden. Phagen ELISA Experimente mit M13KE Einzelklonen zeigten, dass aus allen eingesetzten Bibliotheken Phagen mit Fusionspeptiden isoliert werden konnten, die an den jeweiligen parentalen Antikörper des zur Selektion eingesetzten „single-chain“ Antikörperfragmentes binden. Ein Teil der Phagenklone wies eine zumindest partielle Kreuzreaktivität zu dem entsprechenden anderen anti-EGFR Antikörper auf, obwohl sie auf Bindung an diesen nicht selektioniert worden waren. Die Sequenzanalyse der Fusionspeptide lieferte keine gemeinsame Consensus Sequenz, es konnten jedoch kurze, gemeinsame Sequenzmotive identifiziert werden. In MTT-Zytotoxizitätsassays wurden diese Klone als mögliche Kompetitoren der Bindung des gegen EGFR gerichteten Immuntoxins scFv(225)-ETA in MTT-Zytotoxizitätsassays eingesetzt. Ein Teil der selektionierten Fusionspeptide war in der Lage, die Bindung der aus dem „single-chain“ Antikörperfragment von Cetuximab scFv(225) bestehenden Zellbindungsdomäne des Immuntoxins scFv(225)-ETA an EGFR exprimierende Zellen zu kompetieren. Auch für einige Fusionspeptide, die zunächst nur auf Bindung an Matuzumab selektioniert worden waren, wurde dies beobachtet. Peptide, welche die Bindung des Immuntoxins an EGFR kompetieren, weisen in ihren pIII-Fusionspeptiden laut Sequenzanalyse die gemeinsamen Sequenzmotive KTL bzw. YPLG auf. Nach einem Abgleich der Sequenzen der kompetierenden, kreuzreaktiven Peptide mit KTL bzw. YPLG Motiven wurden zwei Peptide ausgewählt und zur Immunisierung von Kaninchen eingesetzt. In MTT-Zytotoxizitätsassays wurde zunächst bestätigt, dass die synthetischen Peptide in der Lage sind, durch Kompetition spezifisch die Bindung des gegen EGFR gerichteten Immuntoxins scFv(225)-ETA und dessen zytotoxische Wirkung auf EGFR exprimierende Zellen zu verhindern. Kaninchenseren und aus diesen affinitätsgereinigte anti-Peptid Antikörper zeigten in ELISA Experimenten konzentrationsabhängige Bindung an die immobilisierten synthetischen Peptide. Die Bindung der anti-EGFR Antikörper Cetuximab und Matuzumab an die synthetischen Peptide konnte ebenfalls bestätigt werden. In einer Reihe von Experimenten wurde untersucht, ob die Immunisierung mit potentiellen Mimotopen der anti-EGFR Antikörper eine endogene humorale Immunantwort gegen den humanen EGFR bewirkt hatte. Die Bindung der affinitätsgereinigten anti-Peptid Antikörper an den Rezeptor auf der Oberfläche EGFR-exprimierender Tumorzellen wurde zunächst in Durchflusszytometrie (FACS) Experimenten analysiert. Für die gereinigten anti-Peptid Antikörper wurde spezifische Bindung an murine Renca-lacZ/EGFR Zellen sowie an humane A431 Vulvakarzinomzellen detektiert, die den humanen EGFR auf der Oberfläche exprimieren. Die Bindung an A431 konnte durch Vorinkubation der Antikörper mit einem Überschuss der entsprechenden synthetischen Peptide vollständig verhindert werden. In einer weiteren Serie von FACS Experimenten konnte gezeigt werden, dass die Bindung der Antikörper Cetuximab und Matuzumab an EGFR durch eine Vorinkubation von Renca-lacZ/EGFR Zellen mit den gereinigten anti-Peptid Antikörpern deutlich reduziert werden konnte. Dies ist ein Beweis für die Fähigkeit der in Immunisierungsexperimenten generierten anti-Peptid Antikörper, die Bindungsstellen von Cetuximab und Matuzumab am EGFR zumindest teilweise zu besetzen. Diese Beobachtungen zeigen, dass durch Immunisierung mit den hier ausgewählten synthetischen Peptiden in Versuchstieren die Bildung von Antikörpern mit ähnlichen Eigenschaften wie Cetuximab bzw. Matuzumab und somit eine endogene Immunantwort gegen den humanen EGFR ausgelöst werden konnte. In Immunfluoreszenz Experimenten wurde die Bindung der anti-Peptid Antikörper an Renca-lacZ/EGFR Zellen erneut überprüft und mittels konfokaler Laser Scanning Mikroskopie (CLSM) visualisiert. In diesen Experimenten wurde für gereinigte anti-Peptid Antikörper (KTL Motiv bzw. YPLG Motiv) Bindung an die Zelloberfläche bzw. membrannahe intrazelluläre Strukturen beobachtet, die der Lokalisierung der Bindungssignale der parallel getesteten anti-EGFR Antikörper Cetuximab, Matuzumab und dem murinen anti-EGFR Antikörper R-1 entsprach. Die Bindung der anti-Peptid Antikörper konnte durch Zugabe eines Überschusses der jeweiligen synthetischen Peptide verhindet werden. In einer weiteren Serie von Immunfluoreszenz Experimenten wurde der humane EGFR auf Renca-lacZ/EGFR Zellen gleichzeitig mit anti-KTL bzw. anti-YPLG Peptid Antikörpern aus Kaninchen sowie dem murinen anti-EGFR Antikörper R-1 detektiert. Durch eine Überlagerung der Signale konnte eindeutig eine Kolokalisation nachgewiesen werden. Dies ist ein Beweis dafür, dass es sich bei der Bindung der anti-Peptid Antikörper an die Oberfläche von Renca-lacZ/EGFR um Bindung an den humanen EGFR handelt. In Lysaten von EGFR exprimierenden Zelllinien konnte mit gereinigten anti-Peptid Antikörpern ein Protein detektiert werden, dessen Größe dem humanen EGFR entspricht. Die durch Stimulation des humanen EGFR mit dem natürlichen Peptidliganden EGF hervorgerufene Autophosphorylierung des Rezeptors in A431 Zellen konnte durch Zugabe von anti-Peptid Antikörpern teilweise inhibiert werden, allerdings nicht in dem gleichen Ausmaß, wie dies für die als Positivkontrollen eingesetzten anti-EGFR Antikörper Cetuximab und Matuzumab beobachtet wurde. In MTT-Zytotoxizitätsassays konnte darüber hinaus eine teilweise Kompetition der Bindung des rekombinanten Toxins TGF!-ETA an EGFR-exprimierende A431 Zellen, und somit eine teilweise Kompetition des natürlichen Peptidliganden TGF! an EGFR durch Vorinkubation mit anti-Peptid Antikörpern nachgewiesen werden. Zur näherungsweisen Quantifizierung der Affinitäten der anti-Peptid Antikörper und der anti-EGFR Antikörper Cetuximab und Matuzumab für die synthetischen Peptide (KTL Motiv und YPLG Motiv) bzw. für die gereinigte extrazelluläre Domäne des humanen EGFR (sEGFR) wurden ELISA Bindungstests durchgeführt. Die aus den Bindungskurven berechneten Affinitätswerte zeigen, dass die anti-Peptid Antikörper an sEGFR im nanomolaren Bereich binden und damit ca. 200-fach niedrigere Affinitäten für den Rezeptor besitzen als die affinitätsoptimierten anti-EGFR Antikörper Cetuximab bzw. Matuzumab. Die Affinitäten der anti- Peptid Antikörper für die synthetischen Peptide liegen ebenfalls im nanomolaren Bereich, während Cetuximab und Matuzumab lediglich mikromolare Affinitäten für die Peptide besitzen. Durch „Epitope Mapping“ in silico vorhergesagte mögliche Oberflächenstrukturen auf EGFR, welche die Peptidmimotope mit KTL bzw. YPLG Motiven nachbilden, sind direkt benachbart zu den mittlerweile publizierten Bindungsstellen von Matuzumab und Cetuximab bzw. EGF in der Ektodomäne III/L2 von EGFR (Li et al., 2005; Schmiedel et al., 2008) und zeigten im Falle des Peptides mit KTL Motiv Übereinstimungen mit Teilen beider Epitope. Möglicherweise ist dieses Peptid in der Lage, alternative Strukturen mit KTL bzw. KTI Motiven an der Oberfläche von EGFR nachzubilden, die Gemeinsamkeiten mit beiden Epitopen von Cetuximab bzw. Matuzumab besitzen und daher von beiden Antikörpern erkannt werden können. Eine endgültige Klärung der Bindung der hier identifizierten Peptide an Cetuximab bzw. Matuzumab bzw. der Bindung der anti-Peptid Antikörper an EGFR könnte in nachfolgenden Untersuchungen mittels Röntgenkristallographie bzw. NMR strukturell aufgeklärt werden – die hierzu nötigen Peptide bzw. Proteine liegen bereits in gereinigter Form vor. Eine Optimierung der hier identifizierten Mimotope zur Steigerung der Affinitäten der induzierten anti-Peptid Antikörper für EGFR könnte zur Entwickung von Vakzinen führen, die eine Alternative zur wiederholten, kostenintensiven passiven Immunisierung von Patienten mit EGFR-exprimierenden Tumoren mit monoklonalen Antikörpern darstellen könnte.
In the title compound, C11H14O4, an intermediate for the synthesis of a new kind of estrogen receptor modulator, all non-H atoms lie on a common plane (r.m.s. deviation = 0.0472 Å). All C-C bonds in the side chain are in a trans conformation, and the hydroxyl group is also trans to the methylene chain. In the crystal structure, molecules form centrosymmetric dimers showing a head-to-head arrangement which is stabilized by O-H...O hydrogen bonds. A weak C-H...O contact is also present.
PERIOD proteins are central components of the Drosophila and mammalian circadian clocks. The crystal structure of a Drosophila PERIOD (dPER) fragment comprising two PER-ARNT-SIM (PAS) domains (PAS-A and PAS-B) and two additional C-terminal alpha-helices (alphaE and alphaF) has revealed a homodimer mediated by intermolecular interactions of PAS-A with tryptophane 482 in PAS-B and helix alphaF. Here we present the crystal structure of a monomeric PAS domain fragment of dPER lacking the alphaF helix. Moreover, we have solved the crystal structure of a PAS domain fragment of the mouse PERIOD homologue mPER2. The mPER2 structure shows a different dimer interface than dPER, which is stabilized by interactions of the PAS-B beta-sheet surface including tryptophane 419 (equivalent to Trp482dPER). We have validated and quantitatively analysed the homodimer interactions of dPER and mPER2 by site-directed mutagenesis using analytical gel filtration, analytical ultracentrifugation, and co-immunoprecipitation experiments. Furthermore we show, by yeast-two-hybrid experiments, that the PAS-B beta-sheet surface of dPER mediates interactions with TIMELESS (dTIM). Our study reveals quantitative and qualitative differences between the homodimeric PAS domain interactions of dPER and its mammalian homologue mPER2. In addition, we identify the PAS-B beta-sheet surface as a versatile interaction site mediating mPER2 homodimerization in the mammalian system and dPER-dTIM heterodimer formation in the Drosophila system.
The transporter associated with antigen processing (TAP) is an essential machine of the adaptive immune system that translocates antigenic peptides from the cytosol into the endoplasmic reticulum lumen for loading of major histocompatibility class I molecules. To examine this ABC transport complex in mechanistic detail, we have established, after extensive screening and optimization, the solubilization, purification, and reconstitution for TAP to preserve its function in each step. This allowed us to determine the substrate-binding stoichiometry of the TAP complex by fluorescence cross-correlation spectroscopy. In addition, the TAP complex shows strict coupling between peptide binding and ATP hydrolysis, revealing no basal ATPase activity in the absence of peptides. These results represent an optimal starting point for detailed mechanistic studies of the transport cycle of TAP by single molecule experiments to analyze single steps of peptide translocation and the stoichiometry between peptide transport and ATP hydrolysis.
Molecules of the title compound, C40H42BrNO6, are located on a crystallographic twofold rotation axis. As a result, the nitro group and bromine residue are mutually disordered with equal occupancies. The propoxy-substituted aromatic rings are close to parallel to each other [dihedral angle = 21.24 (1)°], whereas the propenoxy-substituted rings enclose a dihedral angle of 70.44 (1)°. The dihedral angles between the methylene C atoms and the aromatic rings shows that the propenoxy substituted rings are bent away from the calixarene cavity [dihedral angle between the planes = 35.22 (8)°], whereas the propoxy-substituted rings are almost perpendicular [79.38 (10)°] to the plane of the methylene C atoms. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.006 A° ; disorder in main residue; R factor = 0.065; wR factor = 0.130; data-to-parameter ratio = 11.8.
We developed the Pharmacophore Alignment Search Tool (PhAST), a text-based technique for rapid hit and lead structure searching in large compound databases. For each molecule, a two-dimensional graph of potential pharmacophoric points (PPPs) is created, which has an identical topology as the original molecule with implicit hydrogen atoms. Each vertex is coloured by a symbol representing the corresponding PPP. The vertices of the graph are canonically labelled. The symbols associated with the vertices are combined to a so-called PhAST-Sequence beginning with the vertex with the lowest canonical label. Due to the canonical labelling the created PhAST-Sequence is characteristic for each molecule. For similarity assessment, PhAST-Sequences are compared using the sequence identity in their global pairwise alignment. The alignment score lies between 0 (no similarity) and 1 (identical PhAST-Sequences). In order to use global pairwise sequence alignment, a score matrix for pharmacophoric symbols was developed and gap penalties were optimized. PhAST performed comparably and sometimes superior to other similarity search tools (CATS2D, MOE pharmacophore quadruples) in retrospective virtual screenings using the COBRA collection of drugs and lead structures. Most importantly, the PhAST alignment technique allows for the computation of significance estimates that help prioritize a virtual hit list.
Die 5-Lipoxygenase (5-LO) ist das Schlüsselenzym in der Biosynthese proinflammatorischer Leukotriene, die maßgeblich an der Entstehung allergischer und entzündlicher Erkrankungen wie Arthritis, Asthma und kardiovaskulären Erkrankungen beteiligt sind (23). Humane 5-LO besteht aus 673 Aminosäuren und besitzt ein Molekulargewicht von 77,8 kDa (25). Das Protein besteht aus einer größeren katalytischen Domäne, die ein zentrales Eisen(II)-Atom enthält, dass für die zweistufige LTA4-Bildung aus Arachidonsäure benötigt wird, und einer kleineren C2-ähnlichen Domäne, die Bereiche für die Membran- sowie Ca2+-Bindung enthält. Durch Stimulation von intakten Zellen kommt es zu einer Translokation der 5-LO an die Kernmembran. Die Wechselwirkung mit dem membranständigen FLAP fördert die 5-LO-Leukotrienbildung. Die vorliegende Arbeit beschäftigte sich mit niedermolekularen Modifikationen der 5-LO durch U-73122 und Glutathion sowie mit der Charakterisierung von 5-LO-Inhibitoren. U-73122 ist ein Inhibitor, der in vitro und in vivo mit einem IC50-Wert von 30 nM bzw. 2,4 µM die 5-LO-Aktivität hemmt (2). U-73122 verfügt über eine thiol-reaktive Maleinimid-Gruppe, wodurch die Substanz kovalent an einige 5-LO-Cysteine (Cys-99, -159 und weitere) binden kann. Entsprechende U-73122-5-LO-Peptide konnten nach Trypsin-Verdau der 5-LO mit MALDI-MS-Messungen nachgewiesen werden. Für diesen Zweck musste eine effiziente Aufreinigung für native 5-LO (Reinheit > 95%) entwickelt werden. Um die Veränderung der 5-LO-Aktivität nach U-73122-Zugabe zu untersuchen, wurden Cystein/Serin-5-LO-Mutanten hergestellt. Es konnte festgestellt werden, dass die Mutante C416S-5-LO nicht mehr effektiv durch U-73122 gehemmt werden konnte. Daher ist anzunehmen, dass U-73122 an Cystein-416 der 5-LO bindet und die 5-LO-Produktbildung hemmt. Auf der 5-LO-Oberfläche kann ein Bereich lokalisiert werden, der einen Zugang für das Substrat zum aktiven Zentrum der 5-LO bilden könnte (238,239). Dieser Bereich liegt in unmittelbarer Nähe zu Cystein-416. Daher besteht die Möglichkeit, dass U-73122, nachdem es an Cystein-416 gebunden hat, diesen Bereich hemmend beeinflussen kann. Es konnte nachgewiesen werden, dass Glutathion an mehrere Cysteine der 5-LO (Cystein-99, -264 und -449) kovalent binden kann. Um Veränderungen der 5-LO-Aktivität durch in vivo Glutathionylierungen zu zeigen, wurden HeLa-Zellen mit 5-LO, Cystein-/Serin-5-LO-Mutanten sowie FLAP transfiziert und mit Diamid inkubiert. Es konnte festgestellt werden, dass die native sowie FLAP-gesteigerte 5-LO-Produktbildung durch Diamid gehemmt wird. Dies konnte ebenfalls für die Mutante 3W-5-LO beobachtet werden. Zusätzlich wurden verschiedene Cystein-/Serin-5-LO-Punktmutanten sowie eine 4fach Mutante (C159S/C300S/C416S/C418S-5-LO = 2D-5-LO) untersucht. Das Verhalten dieser Mutanten konnte in drei Gruppen eingeteilt werden. Gruppe A (C159S-, C300S- und C418S-5-LO) wurde durch Diamid nicht beeinflusst. Gruppe B (C416S- und 2D-5-LO) zeigte eine sehr starke Stimulation der 5-LO±FLAP-Leukotrienbildung nach Zugabe von Diamid. Bei Gruppe C (C99S-, C264S- und C449S-5-LO) konnte eine FLAP-gesteigerte 5-HETE-Bildung beobachtet werden. Durch Diamid kommt es zu Glutathionylierungen von zellulären Proteinen, da reduziertes Glutathion (GSH) zu reaktiveren oxidierten Glutathion (GSSG) umgesetzt wird. An der 5-LO-Oberfläche können in Folge an verschiedenen Cysteinen Glutathione binden. Durch die Glutathion-Bindung wird eine stark polare Struktur auf der 5-LO-Oberfläche eingebracht. Dadurch kommt es zu einer verminderten Membranbindung und Produktbildung der nativen 5-LO. Die 5-LO-Oberfläche der 2D-5-LO-Mutante kann an verschiedenen Positionen keine Glutathione mehr binden, es kommt es zu einer stärkeren Wechselwirkung mit Membranbestandteilen und zu einer erhöhten 5-LO-Leukotrienbildung. Für Celecoxib konnte gezeigt werden, dass neben der COX2-Hemmung auch die 5-LO-Aktivität mit einem IC50-Wert von 3-10 µM gehemmt werden kann (268). Im Rahmen dieser Arbeit wurden HeLa-Zellen mit 5-LO±FLAP transfiziert, um den Einfluss von Celecoxib auf FLAP zu untersuchen. Celecoxib führt zu einer direkten Hemmung der 5-LO. ML3000 (Licofelon) wurde als dualer COX/5-LO-Inhibitor entwickelt und hemmt die 5-LO-Aktivität in intakten Zellen, aber nicht im Homogenat. Daher wurden Versuche mit 5-LO±FLAP-tranfizierten HeLa-Zellen durchgeführt, um den Einfluss von ML3000 auf die FLAP-gesteigerte 5-LO-Leukotrienbildung zu zeigen. Aus diesen und weiteren Ergebnissen unserer Arbeitsgruppe konnte gefolgert werden, dass ML3000 ein FLAP-Inhibitor ist (277). Garsubellin A ist strukturverwandt zu Hyperforin, einem dualen COX/5-LO-Inhibitor (204). Garsubellin A hemmt die 5-LO-Aktivität im Homogenat von PMNL und am gereinigten Enzym mit einer IC50 von 10-30 µM. Verbindungen, die den Bicyclo[3.3.1]nonan-Grundkörper des Garsubellin A und Hyperforin enthalten, wurden auf ihr inhibitorisches Potential getestet. Es konnte gezeigt werden, dass der Bicyclo[3.3.1]nonan-Grundkörper alleine nicht für eine 5-LO-Hemmung ausreicht, sondern eine freie Carbonsäure sowie eine bis zwei Prenylierungen vorliegen müssen, um eine 5-LO-Hemmung zu erzielen. Sind diese Voraussetzungen vorhanden, wird die 5-LO-Aktivität in intakten PMNL mit einer IC50 von 10 µM und an gereinigter 5-LO mit 0,3-1 µM gehemmt.
Enantioselective carbon-carbon bond-forming reactions, particularly, using organocatalysts represent one of the most important areas in modern synthetic chemistry. New concepts and methods in organocatalysis are emerging continuously, allowing more selective, economically more appealing and environmentally friendlier transformations. Chiral Brønsted-acid catalysts have recently emerged as a new class of organocatalysts for a number of enantioselective carbon-carbon bond-forming reactions. The first part of this thesis focused on the new development of new Brønsted acid-catalyzed enantioselective Nazarov cyclizations. The Nazarov reaction belongs to the group of electrocyclic reactions and is one of the most versatile methods for the synthesis of five-membered rings, which are the key structural elements of numerous natural products. In general, the Nazarov cyclization can be catalyzed by Brønsted or Lewis acids. However, only a few asymmetric variations have been described, of which most require the use of large amounts of chiral metal complexes. The reactivities of Nazarov cyclizations are also depending on the substituents of the divinyl ketone substrates as described in the first chapter. The substrates to study Brønsted acid-catalyzed enantioselective Nazarov cyclization were prepared following the known procedures. The dihydropyran was treated with tBuLi in THF at –78 oC and then the α,β-unsaturated aldehydes 1 were added to the reaction mixture to afford the corresponding alcohols 2 in moderate to good yields. The alcohols 2 were oxidized to divinyl ketones 3 employing Dess-Martin periodinane/pyridine (DMP/py) in CH2Cl2 at room temperature to obtain the divinyl ketones 3 in moderate to good yields (Scheme 1). Scheme 1. Preparation of substrates in order to study Brønsted acid-catalyzed enantioselective Nazarov cyclization and subsequent transformations. At the starting point, an evaluation of suitable Brønsted acid catalysts for the enantioselective Nazarov cyclization of divinyl ketone 3a was performed. The initial reactions conducted with various BINOL-phosphoric acids 4a-4e in toluene at 60 oC provided the mixture of cis and trans cyclopentenones 5a with enantioselectivities of up to 82% ee (Table 1, entries 1-5). Eventually, improved reactivity could be achieved by using the corresponding N-triflylphosphoramides 4f and 4g, which even at 0 oC gave complete conversion after ten minutes. Additionally, it was shown that the use of these catalysts significantly enhanced both the diastereoselectivity (cis/trans ratio up to 7:1) and the enantioselectivity (up to 96% ee; Table 1, entries 6 and 7). Table 1. Evaluation of Brønsted acids 4a-4g in the enantioselective Nazarov cyclization. The scope of the Brønsted acid-catalyzed enantioselective Nazarov cyclization of various divinyl ketones 3 was explored under an optimized reaction condition (Scheme 2). Treatment of divinyl ketones 3 in CHCl3 in the presence of 2 mol% chiral BINOL-Ntriflylphosphoramide 4g at 0 oC for 1-6 h provided the corresponding cyclopentenone 5 in good yields (45-92%) with excellent enantioselectivities (up to 93% ee) (Scheme 2). Furthermore, the isomerization of cis-cyclopentenone under basic condition led to the corresponding trans-cyclopentenone without loss of enantiomeric purity. This efficient method introduced here was not only the first example of an organocatalytic electrocyclic reaction but also represented the first enantioselective activation of a carbonyl group catalyzed by a chiral BINOL phosphoric acid. Compared to the metal-catalyzed reaction, special features of this new Brønsted acid-catalyzed electrocyclization are the lower catalyst loadings (2 mol%), higher enantioselectivities, accessibility to all possible stereoisomers, as well as the mild conditions. ....
Background: Microarray analysis still remains a powerful tool to identify new components of the transcriptosome and it has helped to increase the knowledge of targets triggered by stress conditions such as hypoxia and nitric oxide. However, analysis of transcriptional regulatory events remain elusive due to the contribution of altered mRNA stability to gene expression patterns, as well as changes in the half-life of mRNAs, which influence mRNA expression levels and their turn over rates. To circumvent these problems, we have focused on the analysis of newly transcribed (nascent) mRNAs by nuclear run on (NRO), followed by microarray analysis. Result: We identified 188 genes that were significantly regulated by hypoxia, 81 genes were affected by nitric oxide, and 292 genes were induced by the co-treatment of macrophages with both NO and hypoxia. Fourteen genes (Bnip3, Ddit4, Vegfa, Trib3, Atf3, Cdkn1a, Scd1, D4Ertd765e, Sesn2, Son, Nnt, Lst1, Hps6 and Fxyd5) were common to hypoxia and/or nitric oxide treatments, but with different levels of expression. We observed that 166 transcripts were regulated only when cells were co-treated with hypoxia and NO but not with either treatment alone, pointing to the importance of a crosstalk between hypoxia and NO. In addition, both array and proteomics data supported a consistent repression of hypoxia regulated targets by NO. Conclusion: By eliminating the interference of steady state mRNA in gene expression profiling, we increased the sensitivity of mRNA analysis and identified previously unknown hypoxia-induced targets. Gene analysis profiling corroborated the interplay between NO- and hypoxia-induced signalling.
The title compound, C21H16N2O2, was derived from 1-(2-hydroxyphenyl)-3-(-methoxyphenyl)propane-1,3-dione. The molecular structure of the title compound is stabilized by an intramolecular O-H...N hydrogen bond. The dihedral angle between the hydroxyphenyl ring involved in this intramolecular hydrogen bond and the pyrazole ring is significantly smaller [10.07 (6)°] than the dihedral angle between the pyrazole and the other hydroxyphenyl ring [36.64 (5)°]. The benzene ring makes a dihedral angle of 54.95 (3)° with the pyrazole ring. The crystal packing is stabilized by O-H...O and O-H...N hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.039; wR factor = 0.101; data-to-parameter ratio = 16.2.
Both the genomes of the epsilonproteobacteria Wolinella succinogenes and Campylobacter jejuni contain operons (sdhABE) that encode for so far uncharacterized enzyme complexes annotated as ‘non-classical’ succinate:quinone reductases (SQRs). However, the role of such an enzyme ostensibly involved in aerobic respiration in an anaerobic organism such as W. succinogenes has hitherto been unknown. We have established the first genetic system for the manipulation and production of a member of the non-classical succinate:quinone oxidoreductase family. Biochemical characterization of the W. succinogenes enzyme reveals that the putative SQR is in fact a novel methylmenaquinol:fumarate reductase (MFR) with no detectable succinate oxidation activity, clearly indicative of its involvement in anaerobic metabolism. We demonstrate that the hydrophilic subunits of the MFR complex are, in contrast to all other previously characterized members of the superfamily, exported into the periplasm via the twin-arginine translocation (tat)-pathway. Furthermore we show that a single amino acid exchange (Ala86→His) in the flavoprotein of that enzyme complex is the only additional requirement for the covalent binding of the otherwise non-covalently bound FAD. Our results provide an explanation for the previously published puzzling observation that the C. jejuni sdhABE operon is upregulated in an oxygen-limited environment as compared with microaerophilic laboratory conditions.
Solid state NMR is a emerging method for the study of membrane proteins, which has received much interest in recent years. Limiting the study of many pharmacologically relevant targets, are the often long measuring times, required to obtain especially higher dimensional solid state NMR spectra of good quality. To address this problem, multiple methods where developed in this work, which can be categorized into two groups. The first set of methods aims at the quality of certain spectra, by implementing a spectral filter, which increases the fidelity of the measured data. The second set of methods, addresses the problem of long measuring times directly, by increasing the sensitivity per unit time, as could be shown, for example, on homo- and heteronuclear singlequantum-singlequantum correlation experiments. The gains in measuring time for the latter group of methods are typically in the order of 2-3, but some experiments allow multiple methods to be employed simultaneously, which can lead to a decrease in measuring time of a factor of up to 8. It is important to mention, that none of the methods introduced in this work require any equipment in addition to the conventional setup present in most sold state NMR laboratories and no changes or addition to the samples under study are required. Therefore the gains reported in this work come at no extra cost and require only minimal implementation effort on the side of the user.
In jüngster Zeit werden vom humanen Immundefizienzvirus-1-abgeleitete lentivirale Vektoren auch in der Gentherapie eingesetzt. Obwohl diese Vektoren nicht-mitotische Zellen transduzieren können, sind sie für einen Gentransfer in primäre ruhende Zellen oft nicht geeignet. In der Abteilung „Medizinische Biotechnologie“ des Paul-Ehrlich-Insituts wurde ein vom simianen Immundefizienzvirus SIVsmmPBj-abgeleiteter lentiviraler Vektor entwickelt, welcher im Gegensatz zu HIV-1-abgeleiteten Vektoren effizient in der G0-Phase des Zellzyklus arretierte humane Fibroblasten und humane primäre Monozyten transduzieren kann (Mühlebach et al., 2005). Im dieser Arbeit wurde das Potenzial dieses neuen Vektors für mögliche Anwendungen in der Gentherapie untersucht, indem seine Transduktionsfähigkeit für weitere primäre Zellen bestimmt wurde. Dabei waren humane hämatopoetische Stammzellen von besonderem Interesse, da sie die Vorläuferzellen aller Zellen des Blutes sind und die Eigenschaft zur Selbsterneuerung besitzen. Die Effizienz des Gentransfers in unstimulierten Stammzellen mit dem SIVsmmPBj-Vektor war jedoch nicht höher als mit anderen lentiviralen Vektoren. Interessanterweise konnte aber ein Einfluss der lentiviralen Vektoren auf das in vitro-Differenzierungspotenzial der transduzierten Stammzellen in die verschiedenen Vorläuferzellen beobachtet werden: Nach Transduktion mit dem SIVsmmPBj- und einem HIV-2-abgeleiteten Vektor differenzierten die Stammzellen bevorzugt in granulozytäre Vorläuferzellen, während die Transduktion mit einem HIV-1-abgeleiteten Vektor die Anzahl aller Vorläuferzellen deutlich reduzierte und insbesonders die Differenzierung in Makrophagenvorläuferzellen verminderte. Zur Untersuchung ihres Differenzierungs-potenzials in vivo wurden transduzierte hämatopoetische Stammzellen zur Repopulierung des Knochenmarks von NOD/SCID-Mäusen eingesetzt. Hierbei wurde jedoch kein Einfluss der verschiedenen lentiviralen Vektoren auf die Differenzierung der Stammzellen beobachtet. Allerdings konnte nur in einem sehr geringen Anteil der transplantierten Zellen eine Expression des übertragenen Gens nachgewiesen werden, so dass nicht ausgeschlossen werden kann, dass die transduzierten Zellen die Fähigkeit zur Repopulierung verloren hatten. Insgesamt ist jedoch zu sagen, dass entgegen der Erwartungen der neue Vektor keinen Vorteil gegenüber HIV-1-Vektoren zur Transduktion von hämatopoetischen Stammzellen aufweist. Weiter wurde die Transduktionsfähigkeit des SIVsmmPBj-Vekors für humanen B-Lymphozyten, Makrophagen und dendritische Zellen untersucht. Auf ruhenden B-Lymphozyten besaß der SIVsmmPBj-Vektor keinen Transduktionsvorteil gegenüber einem HIV-1-abgeleiteten Vektor, während Makrophagen und dendritische Zellen mit signifikant höherer Effizienz transduziert werden konnten. Die hohe Transduktionseffizienz des SIVsmmPBj-Vektors für Monozyten und dendritische Zellen eröffnet die Möglichkeit einer Anwendung in der Immuntherapie, da dendritische Zellen die professionellsten und effektivsten Antigen-präsentierenden Zellen sind. Daher wurde die generelle Eignung des SIVsmmPBj-Vektors für immuntherapeutische Anwendungen untersucht. Ein Tumor-assoziiertes Antigen (Mart-1) wurde in Monozyten übertragen und die transduzierten Zellen zu reifen dendritischen Zellen maturiert. Diese Zellen besaßen die Fähigkeit, Antigen-spezifische zytotoxische T-Zellen zu generieren, deren Funktion durch Sekretion von Zytokinen, in Einzelfällen auch durch spezifische Lyse von Mart-exprimierenden Tumorzellen nachgewiesen wurde. Weiterhin wurde gezeigt, dass nach Transduktion von Monozyten und deren Differenzierung zu Makrophagen auch diese prinzipiell in der Lage sind, Antigen-spezifische zytotoxische T-Zellen zu generieren. Obwohl hier keine vergleichenden Untersuchungen zur Effizienz des T-Zell-Primings durchgeführt werden konnten, ist die prinzipielle Eignung des SIVsmmPBj-abgeleiteten Vektors für eine Immuntherapie damit nachgewiesen. Schließlich wurde untersucht, ob die Maus oder nicht-menschliche Primaten als Tiermodelle für eine mögliche Weiterentwicklung des Vektors in Frage kommen. Murine Monozyten konnten jedoch nicht effizient transduziert werden. Hingegen erwies sich der SIVsmmPBj-Vektor als gut geeignet zur Transduktion von simianen Monozyten, so dass ein Affenmodell für Anwendungen des SIVsmmPBj-Vektors, wie beispielsweise zur Tumor-Immuntherapie oder für Vakzinierungsstudien, in Frage kommt.
In the title compound, C15H17ClN2O4S, the atoms in the hydantoin ring are coplanar (r.m.s. deviation = 0.006 Å). The crystal structure is stabilized by intermolecular N-H...O hydrogen bonds which link the molecules into centrosymmetric dimers. The dihedral angle subtended by the 4-chlorophenyl group with the plane passing through the hydantoin unit is 82.98 (4)°. The cyclohexyl ring adopts an ideal chair conformation. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.030; wR factor = 0.081; data-to-parameter ratio = 15.0.
The crystal structure of the title compound, C15H17BrN2O4S, is stabilized by intermolecular N-H...O hydrogen bonds which link the molecules into centrosymmetric dimers. The dihedral angle subtended by the 4-bromophenyl group with the mean plane passing through the hydantoin unit is 83.29 (5)°. The cyclohexyl group adopts an ideal chair conformation with the methyl group in an equatorial position. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.030; wR factor = 0.070; data-to-parameter ratio = 16.8.
5-lipoxygenase (5-LO) is the key enzyme in the formation of inflammatory leukotrienes, which are mediators of inflammation and allergy. The 5-LO catalyses the oxidation of arachidonic acid to 5-HPETE and subsequently to LTA4. The leukotrienes are involved in the development and maintenance of inflammatory diseases, like asthma and allergic rhinitis. Additionally, 5-LO is overexpressed in some cancer types, although its relevance is still not fully understood. 5-LO expressing cells are B- lymphocytes and cells of myeloid origin like monocytes, macrophages and granulocytes. The 5-LO promoter lacks a TATA or CCAT box and covers two CpG islands. These are characteristics of a housekeeping gene, but as the 5-LO is not expressed ubiquitiously, the expression of the 5-LO is tightly regulated. Epigenetic mechanisms were known to be involved in the control of the 5-LO expression. The HDAC inhibitor TsA significantly induced the transcriptional activity of the 5-LO promoter in reporter gene assays as well as on 5-LO mRNA transcript level in MM6 cells. The GC-boxes GC4 and GC5 in the proximal 5-LO promoter were identified to be essential for the TsA effect, as deletion of these element led to an attenuated TsA effect in reporter gene assay. Recruitment of the transcription factors Sp1 and Sp3 and the RNA polymerase II to the 5-LO promoter was detectable after TsA treatment in MM6 cells by chromatin immunoprecipitation assays (ChIP), while the acetylation status of histone H4 remained unchanged. Likewise it is known that DNA methylation leads to silencing of 5-LO expression in-vitro and in-vivo. The 5-LO promoter is densely methylated in the cell line U937, but unmethylated in HL-60 cells and - elucidated in this study - also in MM6 cells. Reporter gene assays with in-vitro methylated 5-LO promoter containing plasmids revealed that the frequency of methylated CpGs is directly proportional to reduction of 5-LO promoter activity. Incubation of U937 cells with 5-AdC, an inhibitor of DNA methyltransferases, was able to reactivate 5-LO transcription and to demethylate CpG dinucleotides. In the first part of this study the mechanism of TsA induced promoter activation was further investigated. I elucidated the mechanism of Sp1 and Sp3 recruitment to the 5-LO promoter after TsA treatment. Immnoprecipitation assay was used to detect a transcription factor complex containing Sp1 or Sp3 interacting with HDAC proteins, which might change its composition after TsA treatment. Besides the posttranslational modifications of the transcription factors Sp1 and Sp3 after TsA treatment were investigated, potentially causing an increased interaction of the proteins with the 5-LO promoter. Both aspects and their response in HDAC inhibition have been described. TsA did not affect the composition of the Sp1/HDAC1/HDAC2 complex. Sp3 was not located in a complex with the HDAC enzymes. Acetylation of Sp1 and Sp3 was detectable, but no change occurred after TsA treatment. Since neither release of the transcription factors off a complex, nor alterations in posttranslational modifications of Sp1 and Sp3 are the reason for the increased Sp1 and Sp3 binding to the 5-LO promoter, I elucidated alterations in the chromatin structure. The acetylation status of the histone proteins H3 and H4, as well as the chromatin marks H3K4me3, representing active chromatin, and H3K9me, representative for repressive state, were investigated. Additionally, the time course of the TsA effect was determined on 5-LO mRNA level using real-time PCR. The acetylation status of the histone proteins on the 5-LO core promoter correlated with the basal 5-LO mRNA transcript expression in MM6, HL-60 and U937 cells. The highest 5-LO mRNA level was detectable in MM6 cells, followed by HL-60 cells. The lowest 5-LO mRNA level was detected in 5-LO promoter methylated U937 cells. The order of the basal 5-LO mRNA expression of the three cell lines correlates with the basal acetylation status of histone proteins H3 and H4. In MM6 cells the highest basal levels in acH3 and acH4 were detected, followed by HL-60 and U937 cells. Moreover, the data obtained in U937 cells revealed that the correlation between DNA methylation and histone hypoacetylation is alike on the 5-LO promoter. TsA treatment induced the 5-LO mRNA level in the three cell lines with different intensity: 5-LO mRNA level in MM6 cells was induced 11-fold, in HL-60 cells 6- fold and in U937 cells 4- fold. The histone acetylation and methylation levels on the 5-LO promoter after TsA incubation were investigated. No increase in acH3 and acH4, but in H3K4me3 was detectable in MM6 cells by ChIP assay. HL-60 cells showed an increase in acH3 and acH4 as well as in H3K4me3. H3K9me was only detectable in untreated U937 cells, but disappeared after TsA treatment, while acH3, acH4 and H3K4me3 increased constantly after TsA treatme nt. A strong correlation between the histone modifications and the time course of the mRNA expression was detectable in all three cell lines. The combination of the posttranslational modifications acH3, acH4 and H3K4me3 led to a fast effect in transcriptional activation and the maxima of acH3 and acH4 were usually associated with the maximum in 5-LO mRNA transcript level. An increase in H3K4me3 alone, as detected in MM6 cells, led to continuous increase in the 5-LO mRNA expression with a late maximum. Additionally, we detected a slight overall decrease in 5-LO promoter methylation in U937 cells after TsA treatment. This fact taken together with the observed histone modifications could explain the 4- fold response in 5-LO mRNA level to TsA treatment of the methylated cell line U937. Another aim of the present study was to identify the specific HDAC enzymes involved in the 5-LO promoter regulation. Reporter gene assays and real-time PCR with selective HDAC inhibitors revealed that HDACs of class I are involved in 5-LO promoter regulation, namely HDAC 1, 2 and 3. The influence of each of the enzymes seemed to depend on the cell type, as inhibition of HDACs 2, 3 strongly induced 5-LO promoter activity in reporter gene assay in HeLa cells, whereas in MM6 cells HDACs 1 and 2, 3 seemed to be responsible for the 5-LO promoter regulation, measured as 5-LO mRNA level. The HDACs of class IIa and class III are not involved in the regulation of 5-LO mRNA expression. The second part of this study investigated the influence of MBD proteins on the methylated 5-LO promoter and the 5-LO mRNA expression. ChIP assays revealed MBD1, 2 and MeCP2 protein binding to the proximal 5-LO promoter in U937 cells. MBD1 was detectable on the 5-LO promoter in unmethylated HL-60 cells, while no MBD protein was located on the 5-LO promoter in MM6 cells. To elucidate the functional role of the MBD proteins, stable knocked down of MBD proteins was established in U937 cells. 5-LO mRNA transcript level was determined in the knock down clones by real-time PCR. The 5-LO transcript level was increased in all knock down samples. MBD2 knock down clones showed the highest effect in activating 5-LO with a 3- and 4.4-fold increase in the 5-LO mRNA level, followed by MBD1 (3.5- fold) and MeCP2 (2.5-fold) knock down clones. A combined participation of these three enzymes in the corepression of the methylated 5-LO promoter is indicated. Taken together, the data reveal that epigenetic mechanisms are strongly involved in the regulation of 5-LO transcription and might function as a crucial control mechanism of 5-LO expression.
The title compound, C22H18N2O2, was derived from 1-(2-hydroxyphenyl)-3-(4-methoxyphenyl)propane-1,3-dione. The central pyrazole ring forms dihedral angles of 16.83 (5), 48.97 (4) and 51.68 (4)°, respectively, with the methoxyphenyl, phenyl and hydroxyphenyl rings. The crystal packing is stabilized by O-H...N hydrogen bonding. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.037; wR factor = 0.096; data-to-parameter ratio = 17.0.
Based on the commonly used and well-established state-of-the-art DNA sequencing method, i. e. Sanger sequencing, the major target of future research is to develop a fast, cost-effective and gelelectrophoresis-free sequencing method. The aim of the new sequencing technologies is to detect DNA mutations faster and more accurate in order to develop individual therapies for patients (personalized medicine). For this purpose, a lot of novel sequencing techniques like pyrosequencing, mass-spectrometry-assisted sequencing, sequencing by hybridization etc. have been put into practice and already led to commercialized sequencers. The sequencing technology we were mostly interested in is the so-called sequencing-by-synthesis method (SBS). This PhD thesis covers the synthesis of modified nucleosides – the so-called reversible terminators – and their evaluation as reversible terminators. These 3′-modified and dye-labeled nucleotides are incorporated by the polymerase into the DNA-template, then the DNA-synthesis is stopped. After detection of the fluorescent signal, the reversible terminator has to be cleavable in a way (i. e. the polymerase-blocking modification) that the DNA-synthesis can continue. As a result of the polymerase-acceptance tests that have been carried out with the two triphosphates cyanoethoxymethyl(CEM)-dTTP and cyanoethyl(CE)-dTTP as substrates it became clear that the latter one was better incorporated than the first one. Based on this knowledge all four key compounds for the whole reversible terminators possessing the cyanoethyl (CE) group where synthesized within this PhD thesis. Additionally to the synthesis of the modified key compounds, the cleavability of the cyanoethyl function had to be evaluated which is an essential requirement of a reversible terminator for SBS. For addressing this issue, three different CE- and CEM modified monophosphates were created. For each of these three monophosphates an individual synthetic strategy has been developed within this PhD work, each of these strategies and subsequent phosphorylation led to the desired modification. These previously unknown model compounds mimicking the solubility of short oligonucleotides were employed the for qualitative cleavage experiments after their purification and spectroscopical characterization. With these three monophosphates suitable cleavage conditions for a quantitative removal of the CE and the CEM group were examined. In case of the CE function we selectively improved the cleavage conditions while varying the solvent, the reaction temperature as well as the amount of cleaving agent used, in order to make the conditions applicable for an SBS experiment. Due to the fact that the CE function was the most important modification for our SBS experiment, we could even optimize the cleavage efficiency by employing co-solvents like DMSO or DMF. An additional cleavage experiment was carried out by using a short CE-modified oligomer which led to further results that were comparable to the ones obtained from the cleavage experiments of the monomers. One big difference is the required amount of TBAF as cleaving agent for the quantitative removal of the CE-modification from the oligomer. In this case, 7500 equivalents of TBAF are needed for complete CE cleavage at 45 °C compared to the amount of 40 to 80 equivalents TBAF for the monomer (monophosphate). As a conclusion of this result we assume that the amount of cleaving agent and the solubility of the oligomer plays an important role in the CE cleavage efficiency. This assumption was already supported by Saneyoshi et al. who demonstrated for CE-modified RNA oligonucleotides that the CE-cleavage rate is strongly lowered with the increasing of the oligomer length. Thus we could demonstrate that the CE function is quantitatively removable from an oligomer without destroying it. With these results in hands we could prove that the CEM and the CE group are quantitatively cleavable and therefore applicable as blocking groups for reversible terminators. The conditions for the CE cleavage are used for the ArraySBS-“proof-of-principle” which is currently under investigation.
Protein kinases are targets for drug development. Dysregulation of kinase activity leads to various diseases, e.g. cancer, inflammation, diabetes. Human polo-like kinase 1 (Plk1), a serine/threonine kinase, is a cancer-relevant gene and a potential drug target which attracts increasing attention in the field of cancer therapy. Plk1 is a key player in mitosis and modulates entry into mitosis and the spindle checkpoint at the meta-/anaphase transition. Plk1 overexpression is observed in various human tumors, and it is a negative prognostic factor for cancer patients. The same catalytical mechanism and the same co-substrate (ATP) lead to the problem of inhibitor selectivity. A strategy to solve this problem is represented by targeting the inactive conformation of kinases. Kinases undergo conformational changes between active and inactive conformation and thus an additional hydrophobic pocket is created in the inactive conformation where the surrounding amino acids are less conserved. A "homology model" of the inactive conformation of Plk1 was constructed, as the crystal structure in its inactive conformation is unknown. A crystal structure of Aurora A kinase served as template structure. With this homology model a receptor-based pharmacophore search was performed using SYBYL7.3 software. The raw hits were filtered using physico-chemical properties. The resulting hits were docked using Gold3.2 software, and 13 candidates for biological testing were manually selected. Three compounds of the 13 tested exhibit anti-proliferative effects in HeLa cancer cells. The most potent inhibitor, SBE13, was further tested in various other cancer cell lines of different origins and displayed EC50 values between 12 microM and 39 microM. Cancer cells incubated with SBE13 showed induction of apoptosis, detected by PARP (Poly-Adenosyl-Ribose-Polymerase) cleavage, caspase 9 activation and DAPI staining of apoptotic nuclei.
The title compound, C17H18N2O6, crystallizes with two molecules in the asymmetric unit. In both molecules, one of the C-C bonds of the pentamethylene chain connecting the two aromatic rings is in a trans conformation and another displays a gauche conformation. The aromatic rings within each molecule are nearly coplanar [dihedral angles = 3.36 (9) and 4.50 (9)°] and the nitro groups are twisted slightly out of the planes of their attached rings [dihedral angles = 8.16 (3)/6.6 (2) and 4.9 (4)/3.8 (3)°]. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.040; wR factor = 0.101; data-to-parameter ratio = 13.5.
6-(4-Nitrophenoxy)hexanol
(2009)
The title compound, C12H17NO4, features an almost planar molecule (r.m.s. deviation for all non-H atoms = 0.070 Å). All methylene C-C bonds adopt an antiperiplanar conformation. In the crystal structure the molecules lie in planes parallel to (1\overline{1}2) and the packing is stabilized by O-H...O hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.066; wR factor = 0.185; data-to-parameter ratio = 13.2.
The complete molecule of the title compound, C18H24N2O2, is generated by a crystallographic inversion centre. The torsion angles in the hexamethylene chain are consistent with an antiperiplanar conformation, whereas the conformation of the O—CH2—CH2—CH2 unit is gauche. The three-dimensional crystal packing is stabilized by N—H⋯O and N—H⋯N hydrogen bonding.
SIVsmmPBj-derived lentiviral vectors are capable of efficient primary human monocyte transduction, a capacity which is linked to the viral accessory protein Vpx. To enable novel gene therapy approaches targeting monocytes, in this thesis it was aimed to generate enhanced lentiviral vectors that meet the required standards for clinical applications with respect to gene transfer efficiency and safety. The vectors were tested for their suitability in a relevant therapeutic gene transfer approach. At first, it was investigated whether vectors derived from another Vpx-carrying lentivirus reveal the same capacity for monocyte transduction as SIVsmmPBj-derived vectors. A transduction experiment using HIV-2-derived vectors in comparison to PBj-derived vectors revealed a comparable transduction capacity, thus disproving the assumed uniqueness of the PBj vectors. The further generation and analysis of expression constructs for the vpx genes of HIV-2 and SIVmac demonstrated a similar functionality in monocyte transduction as the Vpx of PBj. As VpxPBj, both Vpx proteins facilitated monocyte transduction of a vpx-deficient PBj-derived vector system. For the generation of enhanced SIVsmmPBj and HIV-2 vector systems, only the transfer vectors were optimized, since the packaging vectors available already meet current standards. At first, several modifications were introduced into an available preliminary PBj-derived transfer vector by conventional cloning. The modifications included insertions of cPPT/CTS and WPRE as well as the deletions of the remaining pol sequence, the second exons of tat end rev, and the U3-region within the 3’LTR to generate a SIN vector. Thus, beside safety enhancement, the vector titers were also increased from 9.1x105 TU/ml achieved after concentration with the initial transfer vector up to 1.1x107 TU/ml with the final transfer vector. The PBj vector retained its capability of monocyte transduction when supplemented with Vpx. This conventional method of vector enhancement is time-consuming and may result in only sub-optimal vectors, since it depends on the presence of restriction sites which may not allow deletion of all needless sequences. Moreover, mutations may accumulate during the high number of cloning and amplification steps. Therefore, a new and easier method for lentiviral transfer vector generation was conceived. Three essential segments of the viral genome (5‘ LTR, RRE, ΔU3-3’ LTR) are amplified on the template of the lentiviral wild-type genome and fused by Fusion-PCR. Further necessary elements namely the cPPT/CTS-element, MCS, and PPT are included into the resulting vector by extension of the nucleotide primers used for the PCRs. The amplified and fused vector-scaffold can easily be integrated into a plasmid backbone, followed by insertion of the expression cassette of choice. By applying this approach, two novel lentiviral transfer vectors, based on the non-human SIVsmmPBj and the human HIV-2, were derived. Vector titers achieved for PBj and HIV-2 vectors supplemented with Vpx reached up to 4.0x108 TU/ml and 5.4x108 TU/ml, respectively. The capacity for monocyte transduction was maintained. Thus, safe and efficient, state of the art HIV-2- and PBj-derived vector systems are now available for future gene therapy strategies. Finally, the new vectors were used to set up an approach for gene correction of gp91phox-deficient monocytes for the treatment of X-linked chronic granulomatous disease (xCGD). The administration of autologous, gene-corrected monocytes to counteract systemic and acute infections could lead to a decreased infection load, dissolve granulomas and therefore improve the survival rate of hematopoietic stem cell transplantation (HSCT) which is the current treatment of choice for this disease. First, methods for analysis of gp91phox function were established. Next, they were employed to demonstrate the capacity of monocytes, obtained from healthy humans or mice, for phagocytosis, oxidative burst, and Staphylococcus aureus killing. The in vivo half-life of murine monocytes in the bloodstream and their distribution to specific tissues was determined. Lastly, HIV-1 vectors were used to transfer the gp91phox gene into monocytes from gp91phox-deficient mice. This resulted in the successful restoration of the oxidative burst ability in the cells. In summary, the general suitability of the new vectors for treatment of CGD by monocyte transduction was demonstrated. The results of the mouse experiments provide the foundation for future challenge experiments to evaluate the capability of gene-corrected monocytes to kill off microbes in vivo.
Bacterial porin disrupts mitochondrial membrane potential and sensitizes host cells to apoptosis
(2009)
The bacterial PorB porin, an ATP-binding beta-barrel protein of pathogenic Neisseria gonorrhoeae, triggers host cell apoptosis by an unknown mechanism. PorB is targeted to and imported by host cell mitochondria, causing the breakdown of the mitochondrial membrane potential (delta psi m). Here, we show that PorB induces the condensation of the mitochondrial matrix and the loss of cristae structures, sensitizing cells to the induction of apoptosis via signaling pathways activated by BH3-only proteins. PorB is imported into mitochondria through the general translocase TOM but, unexpectedly, is not recognized by the SAM sorting machinery, usually required for the assembly of beta-barrel proteins in the mitochondrial outer membrane. PorB integrates into the mitochondrial inner membrane, leading to the breakdown of delta psi m. The PorB channel is regulated by nucleotides and an isogenic PorB mutant defective in ATP-binding failed to induce delta psi m loss and apoptosis, demonstrating that dissipation of delta psi m is a requirement for cell death caused by neisserial infection.
This thesis presents a 5.9 Å map of yeast FAS obtained by cryo-electron microscopy using single particle analysis (SPA). The EM-map has been analyzed both by quantitative and qualitative analysis to aid in understanding of the structure and dynamics of yeast FAS. This study approaches the factors limiting the resolution in EM (>20 Å) and further discusses the possibilities of achieving higher-resolutions (<10 Å) in cryo-EM by single particle analysis. Here, SPA is highlighted as a powerful tool for understanding the structure and dynamics of macro-molecular complexes at near native conditions. Though SPA has been used over the last four decades, the low-resolution range (20-30 Å) of the method has limited its use in structural biology. Over the last decade, sub nanometer resolution (<10 Å) structures solved by SPA have been reported --both in studies involving symmetric particles, such as GroEL (D7) and asymmetric particles, such as ribosomes (C1). Recently, near-atomic resolution in the range of 3.8-4.2 Å has been achieved in cases of highly symmetric icosahedral viral capsid structures as well. The yeast FAS structure (D3) presented here is one of two low symmetry structures submitted to the EM-database in a resolution range of 5-6 Å; the other being GroEL (D7). Fatty acid synthase (FAS) is the key enzyme for the biosynthesis of fatty acids in living organisms. There are two types of FAS, namely the type II FAS system in prokaryotes, consisting of a set of individual enzymes, and type I FAS found in eukaryotes as a multienzyme complex. Yeast fatty acid synthase (FAS) is a 2.6 MDa barrel-shaped multienzyme complex, which carries out cyclic synthesis of fatty acids. By electron cryomicroscopy of single particles we obtained a 3D map of yeast FAS at 5.9 Å resolution. Compared to the crystal structures of fungal FAS, the EM map reveals major differences and new features that indicate a considerably different arrangement of the complex in solution, as well as a high degree of variance inside the barrel. Distinct density regions in the reaction chambers next to each of the catalytic domains fit well with the substratebinding acyl carrier protein (ACP) domain. In each case, this resulted in the expected distance of ~18 Å from the ACP substrate binding site to the active site of the catalytic domains. The multiple, partially occupied positions of the ACP within the reaction chamber provide direct insight into the proposed substrate-shuttling mechanism of fatty acid synthesis in this large cellular machine.
Large amplitude intramolecular motions in non-rigid molecules are a fundamental issue in chemistry and biology. The conventional approaches for study these motions by far-infrared and microwave spectroscopy are not applicable when the molecule is non-polar. Therefore, in the current thesis an alternative approach for the investigation of large amplitude intramolecular motions was developed and tested. This new method is based on femtosecond rotational degenerate four-wave mixing spectroscopy (fs DFWM), which is a particular implementation of rotational coherence spectroscopy. The method was successfully applied for the investigation of pseudorotation in pyrrolidine and the ring-puckering vibration in cyclopentene. Another important subject is the photophysics of molecules and molecular clusters which have an ultrashort lifetime of their electronically excited state (photoreactivity). These ultrashort lifetimes often represent a protective mechanism causing photostability. The photoreactivity is usually the manifestation either of an “elementary” reaction, such as proton or electron transfer, which occurs in the excited state or of a fast non-radiative deactivation processes, such as internal conversion via conical intersection of the electronically excited and ground state. Due to a short-lived excited state, the conventional vibrational spectroscopic methods, such as IR depletion detected by resonance two-photon ionization spectroscopy (IR/R2PI), are not applicable for the structural investigation of these systems. Therefore, new approach, termed IR depletion detected by multiphoton ionization with femtosecond laser pulses (IR/fsMPI), was developed for studying the structure of photoreactive microsolvated molecules. The IR/fsMPI technique was applied for investigating the clusters of 1H-pyrrolo[3,2-h]quinoline with water/methanol as well as adenine- and 9-methyl-adenine-hydrates. In addition, the excited state dynamics of bifunctional azaaromatic molecule 7-(2'-pyridyl)indole (7PyIn) was studied by femtosecond pump-probe resonance excitation multiphoton ionization technique (fs REMPI). Under electronic excitation of this molecule a fast proton transfer (phototautomerization) takes place, which is followed by radiationless excited state deactivation process. The fs REMPI spectra lead to the conclusion that the phototautomerization in 7PyIn is coupled with a twisting of the molecule, and that the twisting provides an efficient channel for ultrafast radiationless excited state deactivation. This pattern of excited-state tautomerization/deactivation might be quite general.
The asymmetric unit of the title compound, [K(C3H3N2)(C12H24O6)], is composed of a potassium cation bonded to the six O atoms of a crown ether molecule and the two N atoms of a pyrazolate anion. The K...O distances range from 2.8416 (8) to 3.0025 (8) Å, and the two K...N distances are 2.7441 (11) and 2.7654 (11) Å. The K cation is displaced by 0.8437 (4) Å from the best plane through the six O atoms. The latter plane is almost perpendicular to the plane of the pyrazolate ring [dihedral angle 83.93 (3)°]. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A°; R factor = 0.026; wR factor = 0.066; data-to-parameter ratio = 16.5.
Strukturelle Analyse des CusCBA-Systems von Escherichia coli Kupfer ist als Kofaktor in vielen Enzymen ein essentielles Spurenelement. Die Aufrechterhaltung der Kupferhomöostase ist für die Zelle enorm wichtig, da es sich um ein redox-aktives Übergangsmetall handelt, das selbst in geringsten Konzentrationen toxisch wirkt. Gewöhnlich ist in der Zelle kein einziges freies Kupferion nachweisbar, da die Zelle redundante Mechanismen für die Detoxifikation von Kupfer besitzt. Ein Mechanismus zur Detoxifikation von Kupfer und Silber in E. coli ist das Cus-System. Es handelt sich um einen vierteiligen Effluxkomplex, der sich aus dem inneren Membranprotein CusA, dem periplasmatischen Membranfusionsprotein CusB und dem TolC ähnlichen äußeren Membranprotein CusC zusammensetzt. Das vierte Protein dieses Systems, CusF, dient im Periplasma als Kupferchaperon. Dieser Komplex ermöglicht das Ausschleusen von Cu(I)- und Ag(I)-Ionen aus dem Cytoplasma über das Periplasma und die äußere Membran in einem einzigen Schritt. In dieser Arbeit sollte die Röntgenstruktur des periplasmatischen Proteins CusB geklärt werden, um anhand struktureller Daten analysieren zu können wie CusA und CusC über CusB miteinander verbunden sind und welche Konformationsänderungen dabei vonstatten gehen. CusB wurde dafür über Ni2+-Chelat-Affinitätschromatographie und Größenausschluss-Chromatographie bis zur Homogenität gereinigt. Das Protein lag in Lösung als Monomer vor. Kristalle von CusB wurden nach der Dampfdiffusionsmethode des hängenden Tropfens hergestellt, wobei Kristalle in nur einem von 500 verschiedenen Ansätzen entstanden sind. Röntgenstreuung wurde bis zu einer Auflösung von 8 Å am ESRF (European Synchrotron Radiation Facility) in Grenoble gemessen. Die Streuung der Kristalle ließ starke Anisotropie und hohe Mosaizität erkennen. Um die Qualität der Kristalle von CusB zu verbessern, wurden Kristalle des Proteins ohne Hexahistidinanhängsel hergestellt. Diese Kristalle zeigten in Röntgenstreuungsexperimenten keine Verbesserung der Auflösung und Qualität. Die Röntgenstrukturen und Analysen durch Protease-Verdau von den zu CusB verwandten Proteinen AcrA und MexA zeigten, dass in diesen die N-Termini und C-Termini unstrukturiert sind. Deswegen wurden zunächst Konstrukte von CusB hergestellt in denen verschieden lange Bereiche des N-Terminus deletiert wurden. Ein Konstrukt von CusB, in dem die ersten 20 Aminosäuren deletiert waren, konnte in 10 von 500 Ansätzen kristallisiert werden. Nach Feinabstimmung der initialen Ansätze wurde für Kristalle dieses Konstrukts eine Auflösung von 5,3 Å am ESRF in Grenoble gemessen. Allerdings wies die Röntgenstreuung ebenfalls ein starke Anisotropie und Mosaizität auf, so dass die Struktur dieses Proteins nicht gelöst werden konnte. Strukturelle Analyse des RNAi-Suppressors B2 des Nodamura Virus: RNAi (RNA-Interferenz) bezeichnet einen sequenzspezifischen RNA-Degradationsprozess, um die Synthese eines Proteins zu verhindern. Zwei RNA-Typen wirken als Auslöser der RNAi: Doppelsträngige RNA dient als Vorläufer von siRNAs (small interfering RNAs), während einzelsträngige RNA mit Stamm-Schleifen-Strukturen als Vorläufer der miRNA (microRNA) dient. SiRNA und miRNA werden durch die Typ III Endonuklease Dicer im Cytoplasma produziert, sind 21-30 Nukleotide lang mit charakteristischen 2-NukleotidÜberhängen am 3’-Ende. Über den Komplex aus Dicer und dem doppelsträngige RNA-bindenden Protein R2D2 werden diese kleinen RNAs an das Protein Argonaute (AGO) abgeben. Dieses baut einen Strang der doppelsträngigen, kleinen RNAs über seine RNAse-Aktivität ab und hält den anderen (Führungs-) Strang gebunden. Daraufhin wird entweder komplementäre mRNA abgebaut oder die Translation komplementärer mRNA verhindert. RNAi dient im Organismus unter anderem der Verteidigung gegen Viren, wobei die Expression viraler Proteine durch RNAi verhindert wird. Durch Koevolution haben Viren allerdings Mechanismen zur Unterdrückung der RNAi in den Wirtszellen entwickelt. Ein RNAi Suppressor ist das Protein B2 des Nodamura Virus (NMV B2). Um Mechanismen und Gemeinsamkeiten der RNAi Suppression durch Viren analysieren zu können, wurde in dieser Arbeit die Röntgenstruktur der RNA bindenden Domäne von NMV B2 gelöst. Hierfür wurde ein Konstrukt (Aminosäuren 1-79) bis zur Homogenität aufgereinigt. Kristalle wurden mit einer Proteinkonzentration von 15 mg/ml mittels der Dampfdiffusions-Methode des hängenden Tropfens hergestellt. Diese wuchsen innerhalb von zwei Tagen als lange Nadeln mit Ausmaßen von 200 x 10 x 10 μm. Bei Messungen am ESRF in Grenoble wurde eine Auflösung bis 2,5 Å erreicht. Das Protein kristallisierte mit einem Dimer pro asymmetrischer Einheit. Die Kristalle wuchsen in der Raumgruppe P212121 mit den Einheitszelldimensionen a = 32.2, b = 56.6, c = 98.6. Die Phase wurde über molekularen Ersatz mit der Struktur des homologen Proteins B2 des Flock House Virus (FHV B2) bestimmt. Die Struktur stellte sich als ein gestrecktes Dimer mit einer Größe von ca. 55 x 10 x 15 Å, bestehend aus drei Alpha-Helices pro Monomer dar. Trotz geringer Sequenzidentität von NMV B2 und FHV B2 zeigten beide Strukturen ein Vier-Helix-Bündel, das von einer sehr kurzen Helix am C-Terminus bedeckt ist. Bei einem Vergleich der RNA-bindenden Aminosäurereste der beiden Strukturen fällt ein hoher Grad an Konservierung auf. Von zehn RNA-interagierenden Resten sind fünf identisch. Die RNA bindenden Reste werden von beiden Monomeren des Dimers beigetragen. So ist wohl mindestens ein Dimer für die RNA-Bindung durch B2 Proteine notwendig.
Die Erforschung der neuartigen Materialien BST, PZT und SBT für den Einsatz in neuartigen Speichertechnologien wie dem FeRAM besteht aus vielen unterschiedlichen Teilbereichen. Im Rahmen dieser Dissertation wurden primär zwei Hauptbereiche analysiert. Als Erstes wurden sowohl die Mechanismen der Oberflächenausbildung (Wachstumsverfahren, Prozeßparameter, Substrat Einflüsse) von einzelnen Filmen, als auch die Wechselwirkungen der Schichten untereinander und deren Auswirkung auf das Schichtsystem, untersucht. Im zweiten Schritt wurde das elektrische Verhalten, und die auftretenden Phänomene sowohl qualitativ als auch quantitativ erfaßt und bewertet. Als Elektrodenmaterial für die di/ferroelektrische Speicher kann nicht wie gewohnt dotiertes Silizium/Polysilizium verwenden werden. Da Platin den chemischen und thermischen Belastungen bei der Herstellung dieser Filme besonders gut gewachsen ist, wird es bevorzugt als Elektrode eingesetzt. Bei dem Aufbau der Pt-Elektrode erfolgt die größte Veränderung des Systems durch die RTP-Oxidation des reaktiven Titans. Die Rauhigkeit des vorher sehr fein kristallinen Ti-Films steigt auf das Vierfache bei einer gleichzeitigen Verdreifachung der Korngröße. Da in vielen Bauelementen Si oder Poly-Si in Kombination mit einer Ti/TiN-Barriere als Basis für den Pt-Film fungieren, wurde bei den nächsten Experimenten der Einfluß des Substrates und der TiN-Sputtertemperatur auf die Topologie/Morphologie der Elektrode untersucht. Nur durch Anpassung der TiN Sputterleistung, eine niedrige Substrattemperatur und der Kombination aus N2-RTP Temperung (nach TiN) und O2-Temperung (nach Pt), gelingt es die Rauhigkeit und Kristallitgrößen des entstandenen Filmsystems zu minimieren. Bei der Charakterisierung der di/ferroelektrischen Materialien BST, PZT und SBT wurden zum einen das Wachstum und die beim Aufbau der Schichten auftretenden Phänomene anhand verschiedener Abscheidungstechniken untersucht/verglichen. Zum anderen sind mehrere Schichtdicken, Schichtabfolgen und eine Reihe unterschiedlich getemperter Proben analysiert worden. Die mittels Sputtern hergestellten BST Filme belegen, dieses Material hat typischerweise ein columnares Kristallwachstum und läßt sich sehr fein kristallin aufbringen. Bei der reaktiven Abscheidung aus der Gasphase (MOCVD) hat sich schnell gezeigt, das komplexe Material System BST reagiert bereits bei Variation eines Parameters extrem unterschiedlich. So findet bei einer hohen Substrattemperatur (690°C) ein fließender Übergang vom zwei dimensionalen (2D, Frank-van der Merwe), zum drei dimensionalen (3D, Stranski-Krastanov) Wachstum statt. Wird BST bei 600°C abgeschieden, liegt von Anfang an ein gemischter 2D/3D Schichtaufbau vor, der überwiegend in einen 3D inselartigen Aufbau (Vollmer-Weber) übergeht. Senkt man die Temperatur auf 450°C, bildet sich auf der Oberfläche Haze, der durch eine instabile Gasphasenreaktion an der Oberfläche entsteht und sich hauptsächlich aus Strontium- und Bariumoxid zusammensetzt. Gesputtertes PZT besitzt im Vergleich zu BST eine um den Faktor 6 höhere Wachstumsrate, und bildet zweimal so breite Kristallite aus. Es hat eine relativ feinkörnige Struktur und seine Kristalle wachsen wie beim BST columnar auf. Die MOD Technik erzeugt einen relativ homogenen SBT-Schichtaufbau mit Korngrößen bis zu 135 nm. Erst nach dem Ferroanneal entstehen bis zu dreimal größere Kristalle, die von markanten Korngrenzen getrennt werden und große Kristallflächen mit Unterstrukturen haben. Die mit der MOCVD Methode hergestellten SBT-Proben zeigen teilweise Wachstumsphänomene in Form von Hillocks, die im EDX allerdings keine Unterschiede in der Zusammensetzung aufweisen. Die systematische Untersuchung der Wechselwirkung von Temperatur (600-800°C) und Schichtdicke (ca. 80-175 nm) bei konstanter Temperzeit hat ergeben, daß die Filme bei einem 600°C Ferroanneal kleine Hillocks besitzen, die erst ab 700°C nicht mehr zu beobachten sind. Neben der topographischen Analyse von Di- und Ferroelektrika gibt es einen zweiten sehr wichtigen Aufgabenbereich, die elektrische Charakterisierung dieser Materialien. Da alle herkömmlichen Verfahren diese Daten nur Integral erfassen können, eröffnet die Rastersondenmikroskopie hier erstmalig die Chance, sowohl Topographie als auch elektrische Parameter simultan und mit hoher Ortsauflösung (10-50 nm) zu analysieren. Die ersten Versuchsreihen wurden mit dem EFM gemacht und haben sich mit dem Polarisationsverhalten von PZT und SBT beschäftigt. Zu diesem Zweck wurde ein Experiment entwickelt, bei dem das Ferroelektrikum durch gezielte Polarisationen in zwei definierte Zustände entgegengesetzter maximaler Polarisation versetzt wird. Die Ergebnisse konnten mit dem Oberflächenpotential Mikroskop reproduziert werden, allerdings reagiert das Oberflächenpotential Mikroskop deutlich stärker auf freie Ladungen als das EFM. Um zwischen Ladungsartefakt und realer Beobachtung unterscheiden zu können, wurde ein Verfahren zur Konditionierung und Ladungsentfernung der Probe entwickelt, ohne die Probe merklich zu manipulieren. Da bei den EFM-Untersuchungen viele verschiedene elektrostatische Phänomene aufgetreten sind, ist eine generelle Betrachtung zur Fragestellung, was bildet das erhaltene EFM-Signal eigentlich ab, gemacht worden. Dazu wurde ein deutlich vereinfachtes Ladungsmodell vorgestellt, das den Polarisationsvorgang mit seinen unterschiedlichen Einzelprozessen beschreibt. Zusammenfassend ist zu sagen, daß EFM ein elektrostatisches Gesamtfeld detektiert, das aus verschiedenen Komponenten besteht, die in der Regel qualitativ und nicht quantitativ miteinander verknüpft sind. Im Gegensatz zu makroskopischen Messungen haben zeitabhängige Untersuchungen an SBT gezeigt, die abgebildete Polarisation verringert sich bereits nach wenigen Tagen signifikant. Eine Erklärung für den Signalverlust ist die Annahme, daß sich über die Zeit primär nur die SBT-Oberfläche verändert, da ihr die elektrisch und chemisch stabilisierende Pt-Elektrode fehlt. Eine weitere Überlegung geht davon aus, durch die EFM-Spitze hat eine wesentlich höhere Feldstärke auf das Ferroelektrikum eingewirkt und das Material dadurch stärker gestreßt. Die Untersuchung der temperaturabhängigen Relaxation von ferroelektrischen Filmen liefert weitere interessante Erkenntnisse. Ohne obere Pt-Elektrode kann man bereits ab 130°C einen deutlichen Polarisationsverlust beobachten (Curie-Punkt SBT: 310°C). Die Temperversuche sprechen damit für die Hypothese, durch die fehlende obere Elektrode wurde bei der Polarisation erhöhter Streß in das SBT eingeprägt und das System hat darauf mit stark beschleunigter Relaxation reagiert. Es kann jedoch nicht abschließend geklärt werden, was auf das Materialverhalten einen größeren Einfluß ausübt, die Oberflächenladungen oder die fehlende obere Pt-Elektrode. In weiteren Experimenten wurde die Bildung der ferroelektrischen Phase und deren Störungen untersucht. Versuche mit unterschiedlicher Ferroannealtemperatur bei MOD SBT-Schichten haben gezeigt, die Kristallphasenbildung wird hauptsächlich von der Annealtemperatur gesteuert. Bei einer Temperatur von 600°C wird nur eine partielle Phasenumwandlung erzielt, dagegen liegt bei 800°C eine vollständige Umwandlung in den pseudotetragonalen Perowskit vor. Die Untersuchung eines mittels MOCVD-Verfahren abgeschiedenen SBT-Films ergab eine nicht vollständig polarisierte Oberfläche. Da sich bei einer Substrattemperatur von 640°C primär eine a/b-Kristallachsenorientierung ausbildet, die Probe jedoch nur partiell polarisierbar war, ist höchstwahrscheinlich die Substrattemperatur während der Abscheidung zu niedrig gewesen. Zum Abschluß der Versuche wurde der Polarisationsbereich zunächst auf wenige Mikrometer verkleinert und schließlich sogar auf einzelne Kristalle eingeschenkt. Obwohl es gelingt, einzelne Kristalle zu polarisieren, zeigen diese Experimente deutlich die Limitierungen des EFMs auf. Die ersten Messungen mit dem Piezoresponse-SPM haben ergeben, daß es möglich ist, subkristalline Polarisationsstrukturen ohne nennenswerte Topographieartefakte und „Übersprechen“ abzubilden. Mit dem C-AFM ist in sehr hoher Orts- und Stromauflösung das Leckstromverhalten von BST, PZT und SBT untersucht worden. Da diese di- und ferroelektrischen Materialien eine polykristalline Struktur haben, treten neben Fehlertypen wie Fremdatomdefekten und Leerstellen auch noch eine Vielzahl anderer Kristallbaufehler (Versetzungen, Korngrenzen, ...) auf, die zu erhöhten Leckströmen führen. Auch die Morphologie der Filme beeinflußt das elektrische Verhalten der Materialien. Bei den als Erstes vermessenen BST-Proben ist eine starke Schichtdicken- und Feldstärken-Abhängigkeit zu beobachten. So wird das Leckstromverhalten bei dünnen BST-Proben und niedrigem Potential von extrinsischen Fehlern in Form von Fremdatomdefekten, Leerstellen und verschiedenen Kristallbaufehlern dominiert. Erhöht man allerdings die Feldstärke, so bestimmen die intrinsischen Fehler die Leckstrompfade, da durch das hohe Potential die Bandstruktur solange degradiert bis ein elektrischer Durchbruch vorliegt. Bei höheren Schichtdicken (70 nm) werden durch den intrinsischen Streß des Films hervorgerufene Leckströme erkennbar. Sie treten erst ab einem kritischen Zug- oder Druckstreßniveau in Insel/Domänen-ähnlicher Form auf, der in der topographischen Aufnahme nicht sichtbar ist. Im Gegensatz zu amorphen Materialien wie dem SiO2 spielt bei BST, PZT und SBT die Filmdicke nur eine untergeordnete Rolle, da eine partielle Dünnung nicht automatisch einen erhöhten Leckstrom zur Folge hat. Da ferroelektrische Materialien eine Leckstromgenerierung besitzen die komplexer ist, und einem anderen Zeitablauf folgt, als bei einem Dielektrikum, wurde zuerst das ferroelektrische PZT mit dem C-AFM analysiert. Die ersten Untersuchungen an einer PZT-Probe haben allerdings sehr schnell gezeigt, zwischen BST und PZT gibt es keine nennenswerten Unterschiede im Leckstromverhalten. Für die Herstellung von SBT-Schichten werden hauptsächlich das MOD und das MOCVD Verfahren verwendet. Um festzustellen welche der beiden Abscheidetechniken das bessere Leckstromverhalten hat, wurden MOD und MOCVD SBT-Filme charakterisiert. Diese Untersuchungen haben gezeigt, bei MOCVD Filmen treten die Leckströme hauptsächlich in den Bereichen auf, die leicht vereinzelte oder nicht dicht verwachsene Korngrenzen und Kristallecken besitzen. Im Vergleich dazu weisen die MOD Schichten in ähnlichen Bereichen deutlich wenigere und niedrigere Leckströme auf. Den Einfluß von Topologie und Filmdicke hat die Analyse einer mit 90 nm MOD SBT beschichteten Stufe (120 nm) belegt, da dort nur im Kantenbereich extrem erhöhte Leckströme zu beobachten sind. Das Degradationsverhalten von SBT ist außerdem auch noch dickenabhängig. Dies beweisen I/V Spektren, die bei C-AFM Messungen an unterschiedlich dicken MOD SBT-Schichten (90/180 nm) aufgenommen wurden. Es zeigt sich, speziell bei höheren Feldstärken liegt bei der dünnen SBT-Probe (90 nm) eine um den Faktor vier steilere Degradation vor.
Ataxia represents a pathological coordination failure that often involves functional disturbances in cerebellar circuits. Purkinje cells (PCs) characterize the only output neurons of the cerebellar cortex and critically participate in regulating motor coordination. Although different genetic mutations are known that cause ataxia, little is known about the underlying cellular mechanisms. Here we show that a mutated axJ gene locus, encoding the ubiquitin-specific protease 14 (Usp14), negatively influences synaptic receptor turnover. AxJ mouse mutants, characterized by cerebellar ataxia, display both increased GABAA receptor (GABAAR) levels at PC surface membranes accompanied by enlarged IPSCs. Accordingly, we identify physical interaction of Usp14 and the GABAAR alpha 1 subunit. Although other currently unknown changes might be involved, our data show that ubiquitin-dependent GABAAR turnover at cerebellar synapses contributes to axJ-mediated behavioural impairment.
Innerhalb des adaptiven Immunsystems spielt der Major Histocompatibility Complex (MHC)-Klasse I-Weg der Antigenpräsentation eine essenzielle Rolle bei der Erkennung und Zerstörung Virus-infizierter Zellen. Ein grundlegender Schritt innerhalb dieses Prozesses ist die Translokation endogener Peptide durch den transporter associated with antigen processing (TAP) in das ER-Lumen. Der TAP-Transporter ist zusammen mit verschiedenen Chaperonen und weiteren Faktoren in einem Peptidbeladungskomplex (PLC) assoziiert. Insbesondere Herpesviren, die durch eine lebenslange Persistenz im Wirt und wiederkehrende Reaktivierung unter Stresssituationen gekennzeichnet sind, interferieren direkt mit dem PLC und dem TAP-Transporter. Das varicellovirale Typ-I-Membranprotein UL49.5 inhibiert den TAP-Komplex, wobei das Protein des Rinderherpesvirus (Bovines Herpesvirus 1, BHV-1) zusätzlich die proteasomale Degradation verschiedener Komponenten des PLCs einleitet. Dieser Mechanismus wird durch die C-terminale Domäne des UL49.5-Proteins vermittelt und ist von keinem anderen Virusprotein bekannt. Welche Aminosäuren des Virusproteins jedoch für diese Inhibition und Degradation essenziell sind, wurde bisher nicht aufgeklärt. Ziel der vorliegenden Doktorarbeit war es, die Funktionsweise des BHV-1 UL49.5-Proteins zu verstehen und insbesondere zu analysieren, welche Bereiche des Proteins für die proteasomale Degradation des TAP-Komplexes verantwortlich sind. Das UL49.5-Protein wurde im Rahmen der vorliegenden Arbeit erfolgreich in Insektenzellen und in HeLa-Zellen exprimiert. Mittels Coimmunpräzipitation (Co-IP) wurde daraufhin die Bindung verschiedener UL49.5-Varianten an den TAP-Komplex analysiert. Unterstützt wurden diese Daten durch einen in vivo Interaktionsscreen (BiFC) und in vitro translatiertes UL49.5. Hierbei stellte sich heraus, dass das UL49.5-Protein in Abwesenheit sämtlicher Komponenten des Immunsystems an beide Untereinheiten des TAP-Transporters bindet. Die Bindung erfolgt sowohl an vollständige TAP-Untereinheiten als auch an den sogenannten coreTAP-Komplex, der nur die inneren sechs Transmembranhelices besitzt. Weiterhin wurden systematisch verkürzte UL49.5-Varianten generiert, um wichtige Reste für TAP-Inhibition und proteasomale Degradation zu identifizieren. Interessanterweise sind weder die N-terminale noch die C-terminale Domäne von UL49.5 für die Bindung an den TAP-Komplex zwingend notwendig. Die Bindung an den TAP-Transporter wird demnach über die Transmembrandomäne von UL49.5 vermittelt. Mit Hilfe von Peptidtransport-Analysen wurde die inhibitorische Aktivität verschiedener UL49.5-Mutanten eingehend untersucht. Zusätzlich wurde eine Untersuchung der MHC I-Oberflächenexpression in transient transfizierten HeLa-Zellen etabliert. In diesen Zellen wurde nach Sortierung eine drastisch reduzierte TAP-Konzentration nachgewiesen, die auf proteasomale Degradation des TAP-Komplexes zurückzuführen war. Die Untersuchung von C-terminal verkürzten UL49.5-Mutanten zeigte, dass die letzten zwei C-terminalen Aminosäuren essenziell für die Induktion der TAP-Degradation sind. Die C-terminale Domäne von UL49.5 konnte jedoch, nach Übertragung auf andere Proteine, keine proteasomale Degradation des TAP-Komplexes einleiten. Demnach ist ein weiterer Bereich des Proteins für diesen Prozess zwingend notwendig. Erstaunlicherweise waren auch N-terminal verkürzte UL49.5-Proteine deutlich in ihrer inhibitorischen Funktion beeinträchtigt. Bereits nach der Deletion von 10 N-terminalen Aminosäuren war das Protein nicht mehr in der Lage, eine proteasomale Degradation des TAP-Komplexes einzuleiten. Demnach spielt auch die ER-luminale Domäne von UL49.5 eine wichtige Rolle bei der UL49.5-induzierten TAP-Degradation. Somit wurde ein bisher noch nicht beschriebener neuartiger Inhibitionsmechanismus für das BHV-1 UL49.5-Protein entdeckt. Nach Bindung von UL49.5 über die Transmembrandomäne an beide Untereinheiten des TAP-Transporters scheint die ER-luminale Domäne von UL49.5 ein Signal über die ER-Membran an die zytoplasmatische Domäne zu übertragen, die dann die proteasomale Degradation des TAP-Komplexes einleitet. Es konnte im Rahmen dieser Doktorarbeit erstmals gezeigt werden, dass additive Effekte eines sehr kleinen Virusproteins auf zwei unterschiedlichen Seiten der ER-Membran zu einer proteasomalen Degradation eines sehr großen Membran-Komplexes führen.
Es ist gelungen, self-assembled Monolayers auf Wasserstoff-terminierten Germaniumoberflächen zu präparieren. Für die Charakterisierung wurden unterschiedliche Methoden herangezogen. Neben der Oberflächentopographie, die mit dem AFM untersucht wurde, konnten die Proben durch röntgenspektroskopische Methoden qualitativ und quantitativ vor, während und nach der Präparation analysiert werden. Im Zusammenspiel dieser Methoden war eine umfassende Interpretation der Ergebnisse möglich, die viele neue Erkenntnisse im Bereich der Grundlagenforschung auf dem Halbleitersubstrat Germanium (Ge) ermöglichten. Motivation für diese Arbeit war das Interesse, Ge als Substrat im Bereich der Halbleitertechnologie zu verwenden. Ge hat eine bessere Ladungsträgerbeweglichkeit und andere Vorteile gegenüber Silicium (Si). Der Einsatz scheitert momentan, da das ca. 1-2 nm dicke native Oxid auf der Oberfläche des Ge anders als beim Si wasserlöslich ist. Daher ist eine Renaissance der Grundlagenforschung auf diesem Gebiet zu verzeichnen. Auf der Suche nach einer definierten und passivierten Oberfläche lag der Gedanke nah, dieses Ziel durch das Self-Assembly thiolischer Alkane zu erreichen. Diese Methode ist auf Goldoberflächen sehr gut erforscht und man erhält aus einer entsprechenden Lösung durch einfachste nasschemische Präparation eine bei Laborbedingungen stabile Monolage. Um das Konzept der self-assembled Monolayers auf Ge zu übertragen, war es zunächst notwenig, die Oxidschicht des Substrats so zu entfernen, so dass eine Wasserstoff-terminierte Oberfläche zurückbleibt, die eine möglichst geringe Rauheit aufweist. Dies gelang letztendlich mit einem Tauchbad in verdünnter oder konzentrierter Fluorwasserstoffsäure (Flusssäure, HF) für 5 min bzw. 40 s. Die Rauheit der Proben wurde durch AFM-Aufnahmen bestimmt und liegt bei RMS=0,34 nm. Die chemische Beschaffenheit wurde durch XPS und Totalreflexionsröntgenfluoreszenz am Synchrotron (Sr-TXRF) untersucht. Die referenzfreie Quantifizierung zeigte, dass sich auf der Oberfläche noch Sauerstoff befand, der durch XPS auch dem auf der Oberfläche verbliebenem Wasser zugeordnet werden konnte. Durch Untersuchungen an der Absorptionskante des Sauerstoffs mit NEXAFS konnte diese These untermauert werden. In einem nächsten Schritt gelang die Präparation der SAMs mit Molekülen mit unterschiedlichen Kopfgruppen. Diese definierten die neuen Eigenschaften der Substratoberfläche und sind auch für die Verwendung des Substrats von großer Bedeutung. Es wurden die Kopfgruppen so gewählt, dass eine Detektion durch röntgeninduzierte Fluoreszenz möglich war. Daher fiel die Wahl auf ein fluoriertes Acetat und eine Phosphorsäure als Kopfgruppe jeweils eines Mercaptoundecans. Als Lösemittel diente schließlich wasserfreies Dichlorethan. Für die Abbildung der zunächst in Inseln wachsenden Monolage durch das AFM war die Kopfgruppe zwar unerheblich. Mit dieser Methode ließ sich der Einfluss der Kopfgruppe auf die Anordnung dokumentieren. Es war bei ausgewählten Proben möglich, eine Bedeckung der Oberfläche mit den Thiolen per AFM zu vermessen. Diese lag bei ca. 50 %. Ein Nachweis der Moleküle erfolgte unter anderem durch XPS. Durch diese Methode konnte allerdings noch nicht nachgewiesen werden, ob die Moleküle nur ungeordnet auf der Oberfläche adsorbiert sind, oder tatsächlich chemisch gebunden und aufgerichtet sind. Dies erfolgte durch Messungen an der Synchrotronstrahlenquelle. Durch referenzfreie TXRF konnte die Belegung des Substrats mit Fluor analysiert werden. Da das Fluor jedoch auch ein Rückstand des HF-Tauchbades hätte sein können, wurde durch NEXAFS nachgewiesen, dass bei den Proben, die lange in thiolischer Lösung waren, die Fluorspezies, die bei den frisch HF-getauchten Proben vorhanden ist, praktisch nicht mehr existiert. Im Umkehrschluss wurde auch eine auf Gold präparierte Monolage des gleichen Moleküls mit NEXAFS vermessen. Die Fluorspektren ähnelten sich trotz des unterschiedlichen Substrats. Bei der Röntgenfluoreszenz am Glanzwinkel (GIXRF) können Intensitätsmaxima ein stehendes Wellenfelds oberhalb des Substrats abhängig vom Winkel des einfallenden Strahls verändert werden. Diese Methode kam zum Einsatz um nachzuweisen, dass sich die Moleküle der Kopfgruppe oberhalb des Schwefels und oberhalb des Ge befinden. Durch mathematische Berechnungen ist man in der Lage, die Höhe der Monolage und den Verkippungswinkel der Moleküle zu ermitteln. Dieser lag bei ca. 45° und einer 1,4 nm hohen Monolage. Diese Aussagen wiederum stimmen mit den am AFM erzielten Ergebnissen in erster Näherung überein. Durch das Zusammenspiel fünf unterschiedlicher Methoden war es möglich, diese vielfältigen Erkenntnisse in dem Forschungsfeld der Ge-Oberflächen zu generieren.
Die Fluoreszenz der organischen Verbindung ''Pigment Yellow 101'' wurde mittels zeitaufgelöster Anreg-Abtast-Spektroskopie im sichtbaren Spektralbereich untersucht. P.Y. 101 und ein Derivat mit zusätzlichen Methylgruppen an den Azin-Kohlenstoffatomen, wurden mit zwei Derivaten verglichen, die keine Hydroxygruppen tragen und nicht fluoreszieren. Es konnte gezeigt werden, dass die Fluoreszenz bei diesen Verbindungen eine intrinsische Eigenschaft ist, die von der Reihenfolge der angeregten Zustände bestimmt wird. Bei Derivaten mit Hydroxygruppe entspricht der niedrigste angeregte Zustand einem pp*-Übergang, welcher hauptsächlich durch Fluoreszenz zurück in den Grundzustand gelangt. Bei den Verbindungen ohne Hydroxygruppe fehlt die stabilisierende Wasserstoffbrücke, die zur Absenkung des entsprechenden Zustands führt, so dass bei diesen Derivaten der unterste angeregte Zustand einem np*-Übergang entspricht, der optisch verboten ist und somit nicht direkt populiert wird. Bei der Anregung wird ein höher angeregter Zustand bevölkert, der in den niedrigsten angeregten Zustand relaxiert, welcher über eine konische Durchschneidung schnell und strahlungsfrei erreicht werden kann. Der niedrigste angeregte Zustand schneidet seinerseits den Grundzustand, so dass auch die Repopulierung des Ausgangszustands schnell, effizient und strahlungslos abläuft. Eine ganz andere Art der Photochemie wird bei Azobenzol (AB) und AB-Derivaten beobachtet. Durch Isomerisierung um die N-N-Doppelbindung wird ein Photoprodukt gebildet, das cis-Isomer. Die Quantenausbeute der Isomerisierung ist dabei abhängig davon, welcher elektronische Übergang angeregt wurde. Substituenten am AB üben unterschiedlichen Einfluss auf die elektronischen Eigenschaften aus: Elektronegative Gruppen in meta-Position zur Diazobrücke verändern die Lage der Absorptionsbanden kaum, ebensowenig die Rate der thermischen Rückisomerisierung und auch die Dynamik nach Photoanregung zeigt keine signifikanten Unterschiede in Abhängigkeit vom Substituenten und kann in Analogie an unsubstituiertes AB interpretiert werden. Nach Anregung des np*-Übergangs zerfällt der angeregte Zustand biexponentiell. Die Anregung des pp*-Übergangs, dem optisch erlaubten Übergang, führt zur Population des zweiten angeregten Zustands. Entlang einer konischen Durchschneidung wird schnell und effizient der erste angeregte Zustand populiert. Dieser Prozess zeigt sich bei den zeitaufgelösten Messungen in einer schnellen Zerfallszeit, die nur wenige hundert Femtosekunden beträgt. Die nun folgenden Prozesse finden im ersten angeregten Zustand statt und sind vergleichbar mit den Prozessen nach np*-Anregung. Der Hauptunterschied zwischen den beiden Dynamiken im S1-Zustand ist die Ausgangsgeometrie, mit der die Moleküle diesen Zustand populieren (Franck-Condon-Bereich bei direkter Anregung, bzw. eine große Bandbreite an Geometrien nach dem S2-S1-Übergang), sowie die Schwingungsenergie die das System jeweils besitzt. Auch nach ursprünglicher S2-Anregung können zwei Zerfallszeiten dem ersten angeregten Zustand zugeordnet werden, die analog der direkten Population als Geometrieänderung in Richtung des Potentialminimums und Isomerisierung bzw. Rückkehr in den Grundzustand interpretiert werden und in der Größenordnung von einer bzw. fünf Pikosekunden liegen. Die Modifizierung von Peptiden mit Azobenzol stellt einen Weg dar, zeitlich synchronisiert, eine Störung in der Struktur zu induzieren. Dieses Konzept wurde bereits erfolgreich zur Untersuchung der Faltung zyklischer Peptide eingesetzt. Modifizierte Kollagenstränge sind eine Erweiterung dieses Prinzips, da sie eine Möglichkeit darstellen, die Tertiärstruktur eines Peptids zu adressieren. Für das vorliegende Azokollagen konnte gezeigt werden, dass die gewählte Aminosäuresequenz auch nach Anbringen der Azobenzolklammer zu gefaltetem Kollagen führt, welches thermodynamisch stabil ist. Der Schmelzpunkt der Tripelhelix liegt unter den gewählten Bedingungen bei 55°C. Die Isomerisierung des Azobenzols induziert eine Störung der Tertiärstruktur, die zur teilweisen Entfaltung der Tripelhelix führt, was ein reversibler Prozess ist. Eine vollständige Entfaltung findet erst bei Temperaturen oberhalb des Schmelzpunkts statt. Zeitaufgelöste Messungen im sichtbaren Spektralbereich zeigten, dass die Schalterdynamik durch Anbringung an das Peptid nicht signifikant im Vergleich zum reinen AB-Schalter verändert wird.
A new method to bridge the gap between ligand and receptor-based methods in virtual screening (VS) is presented. We introduce a structure-derived virtual ligand (VL) model as an extension to a previously published pseudo-ligand technique [1]: LIQUID [2] fuzzy pharmacophore virtual screening is combined with grid-based protein binding site predictions of PocketPicker [3]. This approach might help reduce bias introduced by manual selection of binding site residues and introduces pocket shape information to the VL. It allows for a combination of several protein structure models into a single "fuzzy" VL representation, which can be used to scan screening compound collections for ligand structures with a similar potential pharmacophore. PocketPicker employs an elaborate grid-based scanning procedure to determine buried cavities and depressions on the protein's surface. Potential binding sites are represented by clusters of grid probes characterizing the shape and accessibility of a cavity. A rule-based system is then applied to project reverse pharmacophore types onto the grid probes of a selected pocket. The pocket pharmacophore types are assigned depending on the properties and geometry of the protein residues surrounding the pocket with regard to their relative position towards the grid probes. LIQUID is used to cluster representative pocket probes by their pharmacophore types describing a fuzzy VL model. The VL is encoded in a correlation vector, which can then be compared to a database of pre-calculated ligand models. A retrospective screening using the fuzzy VL and several protein structures was evaluated by ten fold cross-validation with ROC-AUC and BEDROC metrics, obtaining a significant enrichment of actives. Future work will be devoted to prospective screening using a novel protein target of Helicobacter pylori and compounds from commercial providers.
CITIES (Chemistry and Industry for Teachers in European Schools) ist ein COMENIUS-Projekt, in dessen Rahmen Materialien für den Chemieunterricht erstellt und erprobt werden. Diese Materialien sollen Lehrkräften helfen, ihren Unterricht attraktiver zu gestalten, indem der Bezug sowohl zum Alltag und der Lebenswelt als auch zur chemischen Industrie aufgezeigt wird. Forensische Chemie Aber was kann Schülerinnen und Schüler faszinieren? Nicht nur Erwachsene, auch Heranwachsende lösen gerne Rätsel, besonders wenn es sich um die Aufklärung von Kriminalfällen handelt. Nicht umsonst spielen Kriminalromane sowie Filme und Fernsehsendungen, die sich mit solchen Themen beschäftigen, eine große Rolle in der Unterhaltungsindustrie. Das angesprochene Interesse kann genutzt werden: Bei der Sicherung und dem Nachweis von Spuren werden häufig chemische Verfahren eingesetzt, von denen eine ganze Reihe einfach auch im Schulexperiment nachvollzogen werden kann. Es war deshalb naheliegend, die Forensische Chemie als einen Themenschwerpunkt des Moduls zu wählen. Folgende Materialien wurden zusammengestellt: 1. Eine Einführung in die Forensische Chemie dient zur Vorbereitung des Unterrichts und führt in eine Auswahl von Methoden der Spurensicherung und des Spurennachweises ein. s.a URN: urn:nbn:de:hebis:30-61651 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/6165/ 2. Eine Sammlung von einfachen Versuchen zur Forensischen Chemie vermittelt einen praktischen Zugang zu diesem Thema mit einfachen Mitteln. s.a URN: urn:nbn:de:hebis:30-61651 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/6165/ 3. Die Darstellung eines Kriminalfalles, zu dessen Lösung chemisches Wissen eine große Rolle spielt, eröffnet die Möglichkeit, auf spannende Weise Inhalte zu wiederholen und zu vertiefen. 4. In einem weiteren Beispiele wird die Methode des Gruppenpuzzles eingesetzt. Auch hier müssen die Schülerinnen und Schüler einen Kriminalfall lösen, wobei unterschiedliche Methoden, Fingerabdrücke sichtbar zu machen, sowie Gipsabdrücke, ein Blutnachweis und - theoretisch - die Elektrophorese zum Einsatz kommen. s.a. URN: urn:nbn:de:hebis:30-86539 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/8653/ 5. Eine kurze Einführung in die Forensische Chemie wird zusätzlich in Form eines Lernprogramms angeboten. Das Lernprogramm „Forensische Chemie - Mit Chemie auf Verbrecherjagd" fasst die wichtigsten Inhalte des Unterrichtmaterials zu 1. - 4. kurz und seitenorientiert zusammen. Das Programm bietet Ihnen neben einer individuellen und nutzerzentrierten Navigation über das angezeigte Pfeilkreuz die Möglichkeit, zwischendurch immer wieder Ihr Wissen zu überprüfen. Die Inhalte werden in jedem gängigen WebBrowser angezeigt. http://cities.eu.org/lernbar/index.htm Die unter den Punkten 1 und 2 aufgeführten Materialien können die Grundlage für einen längeren Kurs sein, oder es können einzelne Aspekte im Zusammenhang mit anderen Themen des Chemieunterrichts erarbeitet werden. Ein Beispiel ist die Verwendung von Cyanacrylat zum Nachweis von Fingerabdrücken. Dieser Inhalt lässt sich sowohl im größeren Zusammenhang der Forensischen Chemie behandeln als auch im Rahmen der Chemie der Kunststoffe.
CITIES (Chemistry and Industry for Teachers in European Schools) ist ein COMENIUS-Projekt, in dessen Rahmen Materialien für den Chemieunterricht erstellt und erprobt werden. Diese Materialien sollen Lehrkräften helfen, ihren Unterricht attraktiver zu gestalten, indem der Bezug sowohl zum Alltag und der Lebenswelt als auch zur chemischen Industrie aufgezeigt wird. Forensische Chemie Aber was kann Schülerinnen und Schüler faszinieren? Nicht nur Erwachsene, auch Heranwachsende lösen gerne Rätsel, besonders wenn es sich um die Aufklärung von Kriminalfällen handelt. Nicht umsonst spielen Kriminalromane sowie Filme und Fernsehsendungen, die sich mit solchen Themen beschäftigen, eine große Rolle in der Unterhaltungsindustrie. Das angesprochene Interesse kann genutzt werden: Bei der Sicherung und dem Nachweis von Spuren werden häufig chemische Verfahren eingesetzt, von denen eine ganze Reihe einfach auch im Schulexperiment nachvollzogen werden kann. Es war deshalb naheliegend, die Forensische Chemie als einen Themenschwerpunkt des Moduls zu wählen. Folgende Materialien wurden zusammengestellt: 1. Eine Einführung in die Forensische Chemie dient zur Vorbereitung des Unterrichts und führt in eine Auswahl von Methoden der Spurensicherung und des Spurennachweises ein. s.a URN: urn:nbn:de:hebis:30-61651 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/6165/ 2. Eine Sammlung von einfachen Versuchen zur Forensischen Chemie vermittelt einen praktischen Zugang zu diesem Thema mit einfachen Mitteln. s.a URN: urn:nbn:de:hebis:30-61651 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/6165/ 3. Die Darstellung eines Kriminalfalles, zu dessen Lösung chemisches Wissen eine große Rolle spielt, eröffnet die Möglichkeit, auf spannende Weise Inhalte zu wiederholen und zu vertiefen. s.a. URN: urn:nbn:de:hebis:30-86529 ; URL: http://publikationen.ub.uni-frankfurt.de/volltexte/2010/8652/ 4. In einem weiteren Beispiele wird die Methode des Gruppenpuzzles eingesetzt. Auch hier müssen die Schülerinnen und Schüler einen Kriminalfall lösen, wobei unterschiedliche Methoden, Fingerabdrücke sichtbar zu machen, sowie Gipsabdrücke, ein Blutnachweis und - theoretisch - die Elektrophorese zum Einsatz kommen. 5. Eine kurze Einführung in die Forensische Chemie wird zusätzlich in Form eines Lernprogramms angeboten. Das Lernprogramm „Forensische Chemie - Mit Chemie auf Verbrecherjagd" fasst die wichtigsten Inhalte des Unterrichtmaterials zu 1. - 4. kurz und seitenorientiert zusammen. Das Programm bietet Ihnen neben einer individuellen und nutzerzentrierten Navigation über das angezeigte Pfeilkreuz die Möglichkeit, zwischendurch immer wieder Ihr Wissen zu überprüfen. Die Inhalte werden in jedem gängigen WebBrowser angezeigt. http://cities.eu.org/lernbar/index.htm Die unter den Punkten 1 und 2 aufgeführten Materialien können die Grundlage für einen längeren Kurs sein, oder es können einzelne Aspekte im Zusammenhang mit anderen Themen des Chemieunterrichts erarbeitet werden. Ein Beispiel ist die Verwendung von Cyanacrylat zum Nachweis von Fingerabdrücken. Dieser Inhalt lässt sich sowohl im größeren Zusammenhang der Forensischen Chemie behandeln als auch im Rahmen der Chemie der Kunststoffe.
Despite the well-known importance of ribonucleic acids (RNA) in cell biology, it is astounding to realize the pace at which new fundamental functions of RNAs have been discovered. One of the fundamental reasons for the multitude of functions of RNA is the property of RNA to adopt different conformations or folds. The primary sequence of RNA, a linear polymer built from four different repetition units, can fold into alternate secondary structure motifs which in turn form alternate long-range interactions in complex tertiary structures. Ligands such as metal ions or small molecular weight metabolites and also proteins or peptides can bind to RNA and induce the changes in tertiary conformation. For example, in the cell, RNA participates in gene regulation in the form of riboswitches. Riboswitches are found in untranslated regions of messenger RNA (mRNA) and adopt alternate conformations depending on the presence or absence of specific metabolites. If a metabolite is present above a specific concentration, it induces a conformational change in the respective riboswitch by binding and thereby alters gene expression. Another example is the RNA thermometer which participates in the cell translational mechanism by a similar strategy. Translation initiation requires the binding of RNA thermometers to the ribosome. The ribosome binding region is located in the 5’ untranslated region of mRNA. At low temperatures this region is prevented from binding to the ribosome by forming basepairs. At higher temperatures, these basepairs dissociate allowing ribosome binding and subsequent translation. Therefore, the characterization and delineation of the kinetics and pathway of RNA folding is important to understand the function of RNA and is an important contribution to fundamentally understand RNA’s role in the cell. RNA conformational transitions occur over a wide range of timescales. Depending on the timescale, various biophysical techniques are used to study RNA conformational transitions. In these biophysical studies, achieving good structural and temporal resolution constitute frequently encountered challenges or limitations. For example, single molecule FRET spectroscopy provides high temporal resolution in the milliseconds at high sensitivity but lacks atomic resolution. Recent advances in the field of Nuclear Magnetic Resonance (NMR) spectroscopy have enabled the elucidation of tertiary folding events to be characterized with atomic resolution. This thesis involves the use of NMR spectroscopy to characterize the folding of RNA molecules. Kinetics experiments require rapid initiation of the kinetics followed by monitoring of the reaction. In this thesis, two different folding initiation techniques have been applied and coupled to the subsequent detection of RNA folding using NMR spectroscopy, namely, photocaging and rapid mixing. The method of photocaging is well established (Kuhn and Schwalbe, 2000) and builds on the following principle: A photolabile moiety is attached to a molecule that prevents a specific interaction. Upon irradiation of the molecule with the photolabile group using laser light at a specific wave length, at which the molecule of interest is not absorbing, the protecting group is released. In our group, together with the group of S. Pitsch, ETH Lausanne, we could "cage" RNA at its equilibrium state by a photolabile molecule (similar work has been carried out in the group of A. Heckel). Rapid and traceless release of the photolabile precursor compound by a laser pulse releases the RNA to fold into its native state; the build-up of the native state of the RNA is monitored by NMR signals that are uniquely characteristic for the native state of the RNA. By optically coupling a laser source to an NMR magnet, the above procedure can take place in situ and the kinetics recorded by NMR. Several different molecules can be caged: The photocage can be attached to RNA. Then, a modified photolabile nucleotide can be placed at strategic positions of a target RNA whose folding properties is to be studied. The photocage can also be attached to a ligand: if folding is dependent on ligand binding then the ligand can be modified to carry a photosensitive unit whose degradation allows binding to RNA. In this thesis, an alternative method for photocaging is introduced. Here, metal ions essential for folding of the RNA are photocaged using the photolabile chelating agent Dimethyl-nitrophen (DMN). Photolysis of DMNr releases the metal ion, thereby RNA folding is initiated. In the rapid-mixing technique, one of (several) components required for proper folding of the RNA is rapidly injected into an NMR sample in situ by the use of a pneumatic injection device. ...
In the title compound, C30H34N2O6, the complete molecule is generated by a crystallographic 2/m symmetry operation. The 1-oxyl-3-pyrroline-3-carboxylate group lies on a mirror plane. The dihedral angle between the ring planes of the biphenyl fragment is constrained by symmetry to be zero, resulting in rather short intramolecular H...H contact distances of 2.02 Å. In the crystal, molecules are connected along the a-axis direction by very weak intermolecular methyl-phenyl C-H...[pi] interactions. The C-H bond is not directed to the center of the benzene ring, but mainly to one C atom [C-H...C(x - 1, y, z): H...C = 2.91 Å and C-H...C = 143°]. Key indicators: single-crystal X-ray study; T = 169 K; mean σC–C) = 0.002 Å ; R factor = 0.049; wR factor = 0.126; data-to-parameter ratio = 19.8.
This thesis demonstrates the advancement of PELDOR spectroscopy beyond its original design of distance measurements in order to disentangle a maximum amount of information additionally encoded in the PELDOR data. In particular, the successful synthesis of novel polynitroxide radicals is described as well as the extraction of the relative orientation of spin labels, conformational flexibility and the separation of dipolar and exchange coupling via orientation selective PELDOR measurements in combination with PESIM based simulations. Moreover, the method of PELDOR "Spin Counting" was experimentally validated.
Die vorliegende Arbeit ist aus drei Teilen aufgebaut. Im ersten, relativ kurz gehaltenen Kapitel wird die klassische Standard-Industrie-Solarzelle auf der Basis monokristallinen Siliziums vorgestellt. Der bisherige Herstellungsprozess der Standard-Industrie-Solarzelle, der in wesentlichen Teilen darauf abzielt, diese Verluste zu minimieren, dient als Referenz für die Entwicklung neuer Fertigungsverfahren, wie sie in den Kapiteln 2 und 3 dieser Arbeit vorgestellt werden. Den ersten thematischen Schwerpunkt dieser Arbeit bildet die Entwicklung eines alternativen Wafering-Konzeptes zum Multi-Drahtsägen, der klassischen Technologie zur Fertigung von Silizium-Wafern. Die Basis des neuen, hier vorgestellten Wafering-Prozesses bildet das Laser-Micro-Jet-Verfahren (LMJTM). Dieses System besitzt eine Reihe von Vorteilen gegenüber klassischen „trockenen“ Laserverfahren. Das ursprünglich auf reinem, deionisiertem Wasser als Strahlmedium aufbauende System wurde im Rahmen dieser Arbeit so modifiziert, dass der Flüssigkeitsstrahl nunmehr nicht nur als flüssiger Lichtleiter dient, sondern gleichzeitig auch als Transportmedium für Ätzmittel, welche den thermischen Abtrag des Siliziums durch den Laserstrahl unterstützen. Ausgehend vom aus der Literatur bekannten chemischen Verhalten des Siliziums wurden 3 Ätzsysteme für Silizium vorgestellt. Dabei wurden Vor- und Nachteile für deren technischen Einsatz diskutiert. Den praktischen Teil dieses Arbeitspaketes bildete der Test zweier Ätzmedien im Experiment. Dabei konnte gezeigt werden, dass wasserfreie Strahlmedien basierend auf perfluorierten Lösemitteln mit bereits sehr geringen Zusätzen gasförmigen Chlors als Ätzmittel für Silizium wässrigen alkalischen Ätzsystemen jeder Konzentration prinzipiell überlegen sind- Parallel zur Evaluation des Einflusses der chemischen Beschaffenheit des Flüssigkeitsstrahls auf den Abtragsprozess fand auch eine Untersuchung verschiedener Prozessparametereinflüsse statt, etwa der Laserleistung, der Laserlichtwellenlänge, etc. Den zweiten thematischen Schwerpunkt der Arbeit bildet die Modifizierung der nasschemischen Schritte zwischen dem Wafering und dem ersten Hochtemperatur-Fertigungsschritt in der Solarzellen-Produktion, der Emitterdiffusion. Diese nasschemischen Schritte umfassen bei der Standard-Industrie-Solarzelle in der Regel eine zum Teil aufwändige Reinigung der Wafer-Oberflächen von partikulären und metallischen Kontaminationen, die vor allem vom Wafering-Prozess herrühren, als auch eine Texturierung der Substrate. Kernanliegen des praktischen Teils dieses Arbeitspaketes ist zum einen die Suche nach alternativen Texturmitteln zum 2-Propanol, dem klassischen Badadditiv in basischen Ätzbädern, das in der Praxis über zahlreiche Nachteile verfügt, etwa einem relativ niedrigen Siedepunkt, der zu seinem permanenten Ausgasen aus der Lösung führt. Zum anderen sollte der auf die Textur folgende Reinigungsprozess rationalisiert werden, um Prozesskosten zu minimieren, entweder durch eine Straffung des Prozesses durch Verringerung des Chemikalienverbrauchs und einer Reduzierung der Prozesszeit oder durch eine Verringerung der Chemikalienkosten. Bei der Suche nach neuen Texturmitteln wurden 45 verschiedene organische Substanzen verschiedener Verbindungsklassen hinsichtlich ihrer Texturwirkung auf monokristallinen Silizium-substraten getestet. Mit 1-Pentanol und p-Toluolsulfonsäure wurden zwei Substanzen ermittelt, welche in der Zukunft als praktikable Alternativen zu 2-Propanol als Texturadditive dienen könnten. Im Kontext der Suche nach neuen Reinigungsverfahren wurden eine Reihe verschiedener neuer Reinigungssequenzen getestet, die sich entweder durch veränderte - in der Regel verringerte - Badkonzentrationen, durch neue Badsequenzen, welche auf bestimmte Teilschritte verzichten oder durch neue Badkompositionen, etwa durch Hinzuziehen von Komplexbildnern für metallische Verunreinigungen von den klassischen Reinigungsprozessen unterscheiden. Der Erfolg des Reinigungseffektes der nasschemischen Sequenzen wurde anhand der Ladungsträger-Lebensdauer in den Wafern abgeschätzt. Dabei konnte gezeigt werden, dass mit Hilfe von LMJ produzierte (gelaserte) Wafer-Oberflächen wesentlich straffere Reinigungsprozesse erfordern als drahtgesägte Substrate. Neben einer deutlichen Straffung des Reinigungsprozesses ist auch eine Verkürzung der Texturzeit bei den mit Lasern geschnittenen Oberflächen möglich, die wiederum ihren Grund im geringeren Schädigungsgrad dieser Oberflächen hat, der einen geringeren Materialabtrag durch die Ätzbäder erfordert, als bei drahtgesägten Wafern. Abschließend konnte noch gezeigt werden, dass drahtgesägte Substrate, die bei gleicher Prozesszeit mit den neuen Texturmitteln prozessiert wurden, über erheblich höhere mechanische Stabilitäten verfügen, als jene, bei denen das klassische Texturmittel 2-Propanol eingesetzt wurde.
Background: Nitric oxide (NO) is an essential vasodilator. In vascular diseases, oxidative stress attenuates NO signaling by both chemical scavenging of free NO and oxidation and down-regulation of its major intracellular receptor, the alpha/beta heterodimeric heme-containing soluble guanylate cyclase (sGC). Oxidation can also induce loss of sGC's heme and responsiveness to NO.
Results: sGC activators such as BAY 58-2667 bind to oxidized/heme-free sGC and reactivate the enzyme to exert disease-specific vasodilation. Here we show that oxidation-induced down-regulation of sGC protein extends to isolated blood vessels. Mechanistically, degradation was triggered through sGC ubiquitination and proteasomal degradation. The heme-binding site ligand, BAY 58-2667, prevented sGC ubiquitination and stabilized both alpha and beta subunits.
Conclusion: Collectively, our data establish oxidation-ubiquitination of sGC as a modulator of NO/cGMP signaling and point to a new mechanism of action for sGC activating vasodilators by stabilizing their receptor, oxidized/heme-free sGC.
9,9-Dimethyl-9-silafluorene
(2009)
The title compound, C14H14Si, crystallizes with two almost identical molecules (r.m.s. deviation = 0.080 Å for all non-H atoms) in the asymmetric unit. All atoms of the silafluorene moiety lie in a common plane (r.m.s. deviations = 0.049 and 0.035 Å for the two molecules in the asymmetric unit). The Si-Cmethyl bonds are significantly shorter [1.865 (4)-1.868 (4) Å] than the Si-Caromatic bonds [1.882 (3)-1.892 (3) Å]. Owing to strain in the five-membered ring, the endocyclic C-Si-C angles are reduced to 91.05 (14) and 91.21 (14)°. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.005 A°; R factor = 0.061; wR factor = 0.157; data-to-parameter ratio = 16.3.
The aim of the study was to investigate the role of the CX3C chemokine FKN in the role of platelet adhesion. The presence of the FKN receptor CX3CR1 in platelets is demonstrated and G-protein dependent activation of platelets with soluble FKN results in the increased adhesion of platelets to collagen and fibrinogen under flow 228 and adhesion of leucocytes to firmly attached platelets 231. Whether membrane-bound FKN is capable to promote the direct adhesion of platelets in flowing blood analogue to leucocytes was completely unknown. The adhesion mechanisms of FKN in mediating the adhesion of leucocytes under flow are well characterised and represent a novel unique mechanism of leucocyte capture and firm adhesion: FKN is responsible for immediate arrest of flowing CX3CR1 expressing leucocytes without the participation of additional adhesion receptors and ligands. This is in contrast to the classical leucocyte adhesion pathways, which are multistep processes involving leucocyte arrest, rolling and subsequent cell activation prior to firm arrest. In leucocytes, the FKN – CX3CR1 axis is sufficient to allow rapid arrest of leucocytes at low shear flow conditions 67, 101, 115, 122, 261. The set of data from this study demonstrates that immobilised FKN was capable to mediate the adhesion of platelets under low shear conditions, whereas there was no interaction in the absence of shear flow. In the presence of vWf in the adhesion matrix, FKN mediated the potent increased adhesion of platelets. This was in parts due to the activation of flowing platelets via CX3CR1 and the augmented translocation of platelets on FKN via the vWf receptor GPIbα. With respect to platelet activation, the function of endothelial FKN was comparable to leucocytes: in both cell types, the FKN dependent activation is mediated by its cognate receptor CX3CR1. This is in contrast to the adhesive capacity: in leucocytes, FKN dependent adhesion is mediated by CX3CR1, whereas in platelets, the adhesive capacity was mostly mediated by the vWf receptor GPIbα with only minor contribution from CX3CR1. In platelets, activation and adhesion by FKN were mediated by two distinct receptors, whereas in leucocytes, CX3CR1 is solely responsible for FKN dependent activation and adhesion. The presented results point out to a role of platelets in early stage of atherosclerosis. The in vivo expression of both, FKN and vWf is regulated by TNF-α, which is released in early stages of inflammation. The presence of vWf and FKN in the endothelial lining of blood vessels during these conditions is sufficient to initiate the capturing and translocation of platelets on the tunica interna. The rolling of platelets on the endothelium can induce endothelial damage and inflammation of the vessel, which might advance to the generation of clinically significant atherosclerotic plaques and fibrous atheroma.
In Philadelphia Chromosome (Ph) positive ALL and CML the fusion between BCR and ABL leads to the BCR/ABL fusion proteins, which induces the leukemic phenotype because of the constitutive activation of multiple signaling pathways down-stream to the aberrant BCR/ABL fusion tyrosine kinase. Targeted inhibition of BCR/ABL by ABL-kinase inhibitors induces apoptosis in BCR/ABL transformed cells and leads to complete remission in Ph positive leukemia patients. However, a large portion of patients with advanced Ph+ leukemia relapse and acquire resistance. Kinase domain (KD) mutations interfering with inhibitor binding represent the major mechanism of acquired resistance in patients with Ph+ leukemia. Tetramerization of BCR/ABL through the N-terminal coiled-coil region (CC) of BCR is essential for the ABL-kinase activation. Targeting the CC-domain forces BCR/ABL into a monomeric conformation, reduces its kinase activity and increases the sensitivity for Imatinib. Here we show that i.) targeting the tetramerization by a peptide representing the Helix-2 of the CC efficiently reduced the autophosphorylation of both WT BCR/ABL and its mutants; ii.) Helix-2 inhibited the transformation potential of BCR/ABL independently of the presence of mutations; iii.) Helix-2 efficiently cooperated with Imatinib as revealed by their effects on the transformation potential and the factor-independence related to BCR/ABL with the exception of mutant T315I. These findings suggest that BCR/ABL harboring the T315I mutation have a transformation potential which is at least partially independent from its kinase activity. Targeted inhibition of BCR/ABL by small molecule inhibitors reverses the transformation potential of BCR/ABL. We definitively proved that targeting the tetramerization of BCR/ABL mediated by the N-terminal coiled-coil domain (CC) using competitive peptides, representing the Helix-2 of the CC, represents a valid therapeutic approach for treating Ph+ leukemia. To further develop competitive peptides for targeting BCR/ABL, we created a membrane permeable Helix-2 peptide (MPH-2) by fusing the Helix-2 peptide with a peptide transduction tag. In this study, we report that the MPH-2: (i) interacted with BCR/ABL in vivo; (ii) efficiently inhibited the autophosphorylation of BCR/ABL; (iii) suppressed the growth and viability of Ph+ leukemic cells; and (iv) was efficiently transduced into mononuclear cells (MNC) in an in vivo mouse model. The T315I mutation confers resistance against all actually approved ABL-kinase inhibitors and competitive peptides. It seems not only to decrease affinity for kinase inhibitors but to confer additional features to the leukemogenic potential of BCR/ABL. To determine the role of T315I in resistance to the inhibition of oligomerization and in the leukemogenic potential of BCR/ABL, we investigated its influence on loss-of-function mutants with regard to the capacity to mediate factor-independence. Thus we studied the effects of T315I on BCR/ABL mutants lacking functional domains in the BCR portion indispensable for the oncogenic activity of BCR/ABL such as the N-terminal coiled coil (CC), the tyrosine phosphorylation site Y177 and the serine/threonine kinase domain (ST), as well as on the ABL portion of BCR/ABL (#ABL-T315I) with or without the inhibitory SH3 (delta SH3-ABL) domain. Here we report that i.) T315I restored the capacity to mediate factor independence of oligomerization_deficient p185BCR/ABL; ii.) resistance of p185-T315I against inhibition of the oligomerization depends on the phosphorylation at Y177; iii.) autophosphorylation at Y177 is not affected by the oligomerization inhibition, but phosphorylation at Y177 of endogenous BCR parallels the effects of T315I; iv.) the effects of T315I are associated with an intact ABL_kinase activity; v.) the presence of T315I is associated with an increased ABL_kinase activity also in mutants unable to induce Y177 phosphorylation of endogenous BCR; vi.) there is no direct relationship between the ABL-kinase activity and the capacity to mediate factor_independence induced by T315I as revealed by the #ABL-T315I mutant, which was unable to induce Y177 phosphorylation of BCR only in the presence of the SH3 domain. In contrast to its physiological counterpart c-ABL, the BCR/ABL kinase is constitutively activated, inducing the leukemic phenotype. The N-terminus of c-ABL (Cap region) contributes to the regulation of its kinase function. It is myristoylated, and the myristate residue binds to a hydrophobic pocket in the kinase domain known as the myristoyl binding pocket in a process called “capping”, which results in an auto-inhibited conformation. Because the cap region is replaced by the N-terminus of BCR, BCR/ABL “escapes” this auto-inhibition. Allosteric inhibition by myristate “mimics”, such as GNF-2, is able to inhibit unmutated BCR/ABL, but not the BCR/ABL that harbors the “gatekeeper” mutation T315I. Here we investigated the possibility of increasing the efficacy of allosteric inhibition by blocking BCR/ABL oligomerization. We demonstrate that inhibition of oligomerization was able not only to increase the efficacy of GNF-2 on unmutated BCR/ABL, but also to overcome the resistance of BCR/ABL-T315I to allosteric inhibition. These results strongly suggest that the response to allosteric inhibition by GNF-2 is inversely related to the degree of oligomerization of BCR/ABL. Taken together these data suggest that the inhibition of tetramerization inhibits BCR/ABL-mediated transformation and can contribute to overcome Imatinib-resistance. The study provides the first evidence that an efficient peptide transduction system facilitates the employ-ment of competitive peptides to target the oligomerization interface of BCR/ABL in vivo. Further the data show that T315I confers additional leukemogenic activity to BCR/ABL, which might explain the clinical behavior of patients with BCR/ABL -T315I-positive blasts. In summary, our observations establish a new approach for the molecular targeting of BCR/ABL and its resistant mutants represented by the combination of oligomerization and allosteric inhibitors.
Im ersten Teil dieser Arbeit wurden Lewis-Säure-katalysierte Friedel-Crafts-Alkylierungen unter Verwendung von Bismut(III)-Salzen als Katalysator untersucht. Bismut(III)-Salze haben gegenüber vielen anderen Metallsalzen den Vorteil, dass sie ungiftig, luftstabil und preiswert sind. In der Regel werden bei der Friedel-Crafts-Alkylierung überstöchiometrische Mengen einer Lewis-Säure wie AlCl3 benötigt und insbesondere Alkylchloride als Reaktionspartner eingesetzt, was eine hohe Menge unerwünschter Abfallprodukte zur Folge hat. Der Einsatz katalytischer Mengen Bi(OTf)3 und die Verwendung von Benzylalkoholen als elektrophile Reaktionspartner beheben diesen gravierenden Nachteil, da hier lediglich Wasser als Nebenprodukt gebildet wird. So konnte innerhalb der vorliegenden Arbeit zunächst eine effiziente Bi(OTf)3-katalysierte Alkylierungen von 1,3-Diketonen unter Verwendung von Benzyl- und Allylalkoholen als Elektrophile entwickelt werden. Mit lediglich 1 Mol-% Bi(OTf)3 konnten die gewünschten 3-alkylierten 1,3-Diketone in guten Ausbeuten isoliert werden. Weiterhin konnten neben Allyl- und Benzylalkoholen auch Styrene als Elektrophile genutzt werden. Unter Verwendung von 0.5 - 5 Mol-% Bi(OTf)3 konnten sowohl Arene, als auch 1,3-Dicarbonylverbindungen wie z. B. Acetylacetonat als nucleophile Reaktionspartner eingesetzt werden. Die entsprechenden 1,1-Diarylalkane und benzylierten 1,3-Dicarbonyle wurden dabei in hohen Ausbeuten erhalten. Um eine Anwendung für die zuvor entwickelten Methoden zu schaffen, wurde im weiteren Verlauf die Bismut(III)-katalysierte Benzylierung und Hydroalkylierung von 4-Hydroxycoumarinen untersucht. Die so erhaltenen Warfarinderivate sind von hohem medizinischem Nutzen, da diese Verbindungen als hoch potente Vitamin K Antagonisten eine breite Anwendung in der Thrombosevorbeugung oder als Rodentizide finden. Im zweiten Teil dieser Arbeit ging es um die Entwicklung neuer, chiraler Brønsted-Säure Katalysatoren. Die asymmetrische Brønsted-Säure Katalyse ist ein wachsendes Forschungsfeld und es konnten in den letzten Jahren viele enantioselektive Transformationen unter Verwendung chiraler BINOL-Phosphorsäurediester entwickelt werden. Bis vor kurzem waren BINOL-Phosphorsäurediester aufgrund ihres milden pH-Werts auf die Aktivierung von prochiralen Iminen beschränkt. Kürzlich wurden jedoch N-triflierte Phosphoramide als eine neue Klasse hoch potenter Brønsted-Säuren beschrieben. Während dieser Arbeit wurden zunächst verschiedene BINOL-basierte N-Triflylphosphoramide synthetisiert. Ausgehend von H8-BINOL konnte hier eine effiziente 3-Schritt Synthese dieser neuen Katalysatorklasse entwickelt werden. Dieser Syntheseweg verzichtet auf Schutzgruppen und ist daher in kürzerer Zeit und in besseren Ausbeuten durchführbar, als die zuvor beschrieben Synthesewege der ungesättigten BINOL-Phosphate oder N-Triflylphosphoramide. Strukturell wurden die auf diese Weise synthetisierten N-Triflylphosphoramide durch Röntgenstrukturanalyse, NMR und TXRF weiter untersucht und deren Aktivität gegenüber verschiedenen prochiralen Carbonylverbindungen überprüft. Hierbei wurde festgestellt, dass N-Triflylphosphoramide, im Vergleich zu BINOL-Phosphorsäurediestern, deutlich besser in der Lage sind, die asymmetrische Nazarov-Cyclisierung von Divinylketonen zu katalysieren. Die gewünschten Cyclopentenone konnten nach sehr kurzen Reaktionszeiten in hohen Ausbeuten und sehr guten Selektivitäten von bis zu 98% ee isoliert werden. Darauf aufbauend wurde die Brønsted-Säure-katalysierte Aktivierung von ungesättigten α-Ketoestern untersucht. Bei der Verwendung von N-Methylindol als Nucleophil konnten die 4-substituierten α-Ketoester unter Verwendung von 5 Mol-% eines 3,3’-silylierten-N-triflylphosphoramids in hohen Ausbeuten und sehr guten Enantioselektivitäten isoliert werden. Neben der erwarteten 1,4-Addition trat, abhängig von der gewählten Brønsted-Säure, eine Doppeladdition des Indols in 2-Position des α-Ketoesters auf. Das so erhaltene Bisindol zeigte hierbei völlig unerwartet atropisomeres Verhalten. Weiterhin konnte gezeigt werden, dass die Bildung dieses Bisindols vermutlich über eine carbokationische Spezies verläuft und es sich somit um eine enantioselektive Sn1-artige nucleophile Substitution handelt. Darauf aufbauend wurde eine N-Triflylphosphoramid-katalysierte Alkylierung von γ-Hydroxylactamen entwickelt. Hier kommt es Brønsted-Säure-katalysiert zu der Bildung eines N-Acyliminium-Ions, welches schließlich durch Indol als Nucleophil abgefangen wird. Auf diese Weise konnten verschieden substituierte γ-Hydroxylactame in die entsprechenden Indol-substituierten Analoga in hohen Enantioselektivitäten überführt werden. Dies ist das erste Beispiel einer hoch enantioselektiven, Brønsted-Säure-katalysierten Substitution von γ-Hydroxylactamen.
Macrophages ingesting apoptotic cells attenuate inflammatory responses, such as reactive oxygen species (ROS) generation. In atherosclerosis, ongoing inflammation and accumulation of apoptotic/necrotic material are observed, suggesting defects of phagocytes in recognizing or responding to dying cells. Modified lipoproteins such as oxidized LDL (oxLDL) are known to promote inflammation and to interfere with apoptotic cell clearance. Here, we studied the impact of cells exposed to oxLDL on their ability to interfere with the oxidative burst in phagocytes. In contrast to apoptotic cells, cells dying in response to or in the presence of oxLDL failed to suppress ROS generation despite efficiently being taken up by phagocytes. In addition, apoptotic cells, but not oxLDL-treated cells, inhibited phosphorylation of extracellular signal-regulated kinase, which is important for NADPH oxidase activation. oxLDL treatment did not interfere with activation of the antiinflammatory transcriptional regulator peroxisome proliferator-activated receptor gamma by apoptotic cells. Moreover, cells exposed to oxLDL failed to suppress lipopolysaccharide- induced proinflammatory cytokine expression, whereas apoptotic cells attenuated these phagocyte responses. Thus, the presence of oxLDL during cell death impaired the ability of apoptotic cells to act antiinflammatory with regard to oxidative burst inhibition and cytokine expression in phagocytes.
In the title compound, C27H20F6N2O2, the dihedral angles between the planes of the aromatic rings connected by the ether O atoms are 84.13 (8) and 75.06 (9)°. The crystal structure is stabilized by N-H...O and N-H...F hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.037; wR factor = 0.088; data-to-parameter ratio = 8.2.
Jeder Mensch kämpft täglich erfolgreich mit Krankheitserregern, ohne dass er sich der komplexen molekularen Vorgänge dabei bewusst wäre. Wie in einem Hollywood-Streifen geht es rasant zur Sache. Ist das Immunsystem angeschlagen oder trifft es auf starke Gegner, kann eine Infektion binnen weniger Tage außer Kontrolle geraten und lebensbedrohliche Reaktionen hervorrufen. Der menschliche Organismus benötigt eine effiziente Verteidigungsstrategie gegen die Eindringlinge und muss, ebenso wie der britische Geheimdienst im Bond-Film, in die Ausbildung geübter Agenten investieren, Agenten mit Doppel-Null-Status. Agenten wie James Bond.
In the title Grignard reagent, [MgBr(C12H9)(C5H10O)2], the Mg centre adopts a distorted tetrahedral MgCO2Br arrangement. The dihedral angle between the two aromatic rings of the biphenyl residue is 44.00 (14)°. Each molecule incorporates one R- and one S-configured 2-methyltetrahydrofuran molecule. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.007 Å; R factor = 0.045; wR factor = 0.108; data-to-parameter ratio = 17.4.
High-resolution NMR structure of an RNA model system : the 14-mer cUUCGg tetraloop hairpin RNA
(2009)
We present a high-resolution nuclear magnetic resonance (NMR) solution structure of a 14-mer RNA hairpin capped by cUUCGg tetraloop. This short and very stable RNA presents an important model system for the study of RNA structure and dynamics using NMR spectroscopy, molecular dynamics (MD) simulations and RNA force-field development. The extraordinary high precision of the structure (root mean square deviation of 0.3 Å) could be achieved by measuring and incorporating all currently accessible NMR parameters, including distances derived from nuclear Overhauser effect (NOE) intensities, torsion-angle dependent homonuclear and heteronuclear scalar coupling constants, projection-angle-dependent cross-correlated relaxation rates and residual dipolar couplings. The structure calculations were performed with the program CNS using the ARIA setup and protocols. The structure quality was further improved by a final refinement in explicit water using OPLS force field parameters for non-bonded interactions and charges. In addition, the 2'-hydroxyl groups have been assigned and their conformation has been analyzed based on NOE contacts. The structure currently defines a benchmark for the precision and accuracy amenable to RNA structure determination by NMR spectroscopy. Here, we discuss the impact of various NMR restraints on structure quality and discuss in detail the dynamics of this system as previously determined.