Refine
Year of publication
- 2001 (37) (remove)
Document Type
- Preprint (18)
- Article (13)
- Doctoral Thesis (3)
- Conference Proceeding (1)
- Report (1)
- Working Paper (1)
Language
- English (37) (remove)
Has Fulltext
- yes (37) (remove)
Is part of the Bibliography
- no (37)
Keywords
Institute
- Physik (37) (remove)
Elliptic flow from nuclear collisions is a hadronic observable sensitive to the early stages of system evolution. We report first results on elliptic flow of charged particles at midrapidity in Au+Au collisions at sqrt[sNN] = 130 GeV using the STAR Time Projection Chamber at the Relativistic Heavy Ion Collider. The elliptic flow signal, v2, averaged over transverse momentum, reaches values of about 6% for relatively peripheral collisions and decreases for the more central collisions. This can be interpreted as the observation of a higher degree of thermalization than at lower collision energies. Pseudorapidity and transverse momentum dependence of elliptic flow are also presented.
Two-pion correlation functions in Au+Au collisions at sqrt[sNN] = 130 GeV have been measured by the STAR (solenoidal tracker at RHIC) detector. The source size extracted by fitting the correlations grows with event multiplicity and decreases with transverse momentum. Anomalously large sizes or emission durations, which have been suggested as signals of quark-gluon plasma formation and rehadronization, are not observed. The Hanbury Brown-Twiss parameters display a weak energy dependence over a broad range in sqrt[sNN].
The minimum-bias multiplicity distribution and the transverse momentum and pseudorapidity distributions for central collisions have been measured for negative hadrons ( h-) in Au+Au interactions at sqrt[sNN] = 130 GeV. The multiplicity density at midrapidity for the 5% most central interactions is dNh-/d eta | eta = 0 = 280±1(stat)±20(syst), an increase per participant of 38% relative to pp-bar collisions at the same energy. The mean transverse momentum is 0.508±0.012 GeV/c and is larger than in central Pb+Pb collisions at lower energies. The scaling of the h- yield per participant is a strong function of pperp. The pseudorapidity distribution is almost constant within | eta |<1.
We report the first measurement of inclusive antiproton production at midrapidity in Au+Au collisions at sqrt[sNN] = 130 GeV by the STAR experiment at RHIC. The antiproton transverse mass distributions in the measured transverse momentum range of 0.25<pperp<0.95 GeV/c are found to fall less steeply for more central collisions. The extrapolated antiproton rapidity density is found to scale approximately with the negative hadron multiplicity density.
The first measurements of light antinucleus production in Au+Au collisions at the Relativistic Heavy-Ion Collider are reported. The observed production rates for d-bar and 3He-bar are much larger than in lower energy nucleus-nucleus collisions. A coalescence model analysis of the yields indicates that there is little or no increase in the antinucleon freeze-out volume compared to collisions at CERN SPS energy. These analyses also indicate that the 3He-bar freeze-out volume is smaller than the d-bar freeze-out volume.
We report results on the ratio of midrapidity antiproton-to-proton yields in Au+Au collisions at sqrt[sNN] = 130 GeV per nucleon pair as measured by the STAR experiment at RHIC. Within the rapidity and transverse momentum range of | y|<0.5 and 0.4<pt<1.0 GeV/c, the ratio is essentially independent of either transverse momentum or rapidity, with an average of 0.65±0.01(stat)±0.07(syst) for minimum bias collisions. Within errors, no strong centrality dependence is observed. The results indicate that at this RHIC energy, although the p-p-bar pair production becomes important at midrapidity, a significant excess of baryons over antibaryons is still present.
Cold target recoil ion momentum spectroscopy (COLTRIM) has been employed to image the momentum distributions of continuum electrons liberated in the impact of slow He2+ on He and H2. The distributions were measured for fully determined motion of the nuclei that is as a function of the impact parameter and in a well de ned scattering plane The single ionization (SI) of H2 leading to H2+ recoil ions in nondissociative states (He2+ + H+ -> He2+ + H+ + e-) and the transfer ionization (TI) of H2 leading to H2 dissociation into two free protons (He2+ H2 -> He+ + H+ + H+ + e-) were investigated. Similar measurements have been carried out for He target, the corresponding atomic two electron system, i.e. the single ionization (SI) (He2+ + He -> He+ + He2+ e- and the transfer ionization (TI) (He2+ + He -> He+ + He2+ + e-). These measurements have been exploited to understand the results obtained for H target. In comparing the continuum electron momentum distributions for H2 with that for He, a high degree of similarity is observed. In the case of transfer ionization of H2, the electron momentum distributions generated for parallel and perpendicular molecular orientations revealed no orientation dependence. The in scattering plane electron momentum distributions for the transfer ionization of H2 by He2+ and for the transfer ionization of He by He2e showed that the salient feature of these distributions for both collisions systems consists in the appearance of two groups of electrons with difeerent structures. In addition to the group of the saddle electrons forming two jets separated by a valley along the projectile axis we nd a new group of electrons moving with a velocity higher than the projectile velocity These new fast forward electrons result from a narrow range of impact parameters and appear as image saddle in the projectile frame. In contrast to the transfer ionization of He, the fast forward electrons group disappears in the in scattering plane electron momentum distribution generated for the single ionization of He. Instead of this group another new group of electrons appear These electrons exhibit an amount of backscattering These backward elec trons appear as image saddle in the target frame The structures that the saddle electrons show are owing to the quasi molecular nature of the collision process For the TI of H2, the TI of He and the SI of He, a pi-orbital shape of the electron momentum distribution is observed This indicates the importance of the rotational coupling 2-p-theta -> 2p-pi in the initial promotion of the ground state followed by further promotions to the continuum The backward electrons as well as the fast forward electrons are not discussed in the theoretical literature at all. However, a number of obvious indications of the existence of the backward and fast forward electrons could be seen in the experimental works of Abdallah et al. as well as in the theoretical calculations of Sidky et al One might speculate that electrons which are promoted on the saddle for some time during the collision could finally swing around the He+ ion in the way out of the collision, i.e. either around the projectile in the forward direction as in the TI case forming the fast forward electrons or around the recoil ion in the backward direction as in the SI case forming the backward electrons. This might be a result of the strong gradient, and hence the large acceleration of the screened He+ potential.
A model based on chiral SU(3)-symmetry in nonlinear realisation is used for the investigation of nuclei, superheavy nuclei, hypernuclei and multistrange nuclear objects (so called MEMOs). The model works very well in the case of nuclei and hypernuclei with one Lambda-particle and rules out MEMOs. Basic observables which are known for nuclei and hypernuclei are reproduced satisfactorily. The model predicts Z=120 and N=172, 184 and 198 as the next shell closures in the region of superheavy nuclei. The calculations have been performed in self-consistent relativistic mean field approximation assuming spherical symmetry. The parameters were adapted to known nuclei.
The relaxation of hot nuclear matter to an equilibrated state in the central zone of heavy-ion collisions at energies from AGS to RHIC is studied within the microscopic UrQMD model. It is found that the system reaches the (quasi)equilibrium stage for the period of 10-15 fm/c. Within this time the matter in the cell expands nearly isentropically with the entropy to baryon ratio S/A = 150 - 170. Thermodynamic characteristics of the system at AGS and at SPS energies at the endpoints of this stage are very close to the parameters of chemical and thermal freeze-out extracted from the thermal fit to experimental data. Predictions are made for the full RHIC energy square root s = 200$ AGeV. The formation of a resonance-rich state at RHIC energies is discussed.
Recent results on transverse mass spectra of J/psi and psi prime mesons in central Pb+Pb collisions at 158 AGeV are considered. It is shown that those results support a hypothesis of statistical production of charmonia at hadronization and suggest the early thermal freeze-out of J/psi and psi prime mesons. Based on this approach the collective transverse velocity of hadronizing quark gluon plasma is estimated to be <v^H_T> \approx 0.2. Predictions for transverse mass spectra of hidden and open charm mesons at SPS and RHIC are discussed.
A generic property of a first-order phase transition in equilibrium, and in the limit of large entropy per unit of conserved charge, is the smallness of the isentropic speed of sound in the mixed phase . A specific prediction is that this should lead to a non-isotropic momentum distribution of nucleons in the reaction plane (for energies < 40A GeV in our model calculation). On the other hand, we show that from present effective theories for low-energy QCD one does not expect the thermal transition rate between various states of the effective potential to be much larger than the expansion rate, questioning the applicability of the idealized Maxwell/Gibbs construction. Experimental data could soon provide essential information on the dynamics of the phase transition.
We calculate prompt photon production in high-energy nuclear collisions. We focus on the broadening of the intrinsic transverse momenta of the partons in the initial state from nuclear e ects, and their influence on the prompt photon pt distribution. Comparing to WA98 data from Pb+Pb collisions at s = 17.4A GeV we find evidence for the presence of nuclear broadening at high pt in this hard process. Below pt < 2.7 GeV the photon distribution is due to small momentum transfer processes. At RHIC energy, s = 200A GeV, the e ect of intrinsic transverse momentum on the spectrum of prompt photons is less prominent. The region pt = 3 4 GeV would be the most promising for studying the nuclear broadening effects at that energy. Below pt = 2 3 GeV the contribution from large momentum transfers flattens out, and we expect that region to be dominated by soft contributions.
We calculate prompt photon production in high-energy nuclear collisions. We focus on the broadening of the intrinsic transverse momenta of the partons in the initial state from nuclear effects, and their influence on the prompt photon pt distribution. Comparing to WA98 data from Pb+Pb collisions at s = 17.4A GeV we find evidence for the presence of nuclear broadening at high pt in this hard process. Below pt < 2.7 GeV the photon distribution is due to small momentum transfer processes. At RHIC energy, s = 200A GeV, the e ect of intrinsic transverse momentum on the spectrum of prompt photons is less prominent. The region pt = 3 4 GeV would be the most promising for studying the nuclear broadening e ects at that energy. Below pt = 2 3 GeV the contribution from large momentum transfers flattens out, and we expect that region to be dominated by soft contributions.
In high energy p+p(bar) interactions the mean multiplicity and transverse mass spectra of neutral mesons from eta to Upsilon (m = 0.5 - 10 GeV/c^2) and the transverse mass spectra of pions (m_T > 1 GeV/c^2) reveal a remarkable behaviour: they follow, over more than 10 orders of magnitude, the power-law function:The parameters C and P are energy dependent, but similar for all mesons produced at the same collision energy. This scaling resembles that expected in the statistical description of hadron production: the parameter P plays the role of a temperature and the normalisation constant C is analogous to the system volume. The fundamental difference is, however, in the form of the distribution function. In order to reproduce the experimental results and preserve the basic structure of the statistical approach the Boltzmann factor e^(-E/T) appearing in standard statistical mechanics has to be substituted by a power-law factor (E/Lambda)^(-P).
A validity of a recent estimate of an upper limit of charm production in central Pb+Pb collisions at 158 AGeV is critically discussed. Within a simple model we study properties of the background subtraction procedure used for an extraction of the charm signal from the analysis of dilepton spectra. We demonstrate that a production asymmetry between positively and negatively charged background muons and a large multiplicity of signal pairs leads to biased results. Therefore the applicability of this procedure for the analysis of nucleus-nucleus data should be reconsidered before final conclusions on the upper limit estimate of charm production could be drawn.
In high energy p(p)+p interactions the mean multiplicity and transverse mass spectra of neutral mesons from η to ϒ (m≅0.5–10 GeV/c2) and the transverse mass spectra of pions (mT> 1 GeV/c2) reveal a remarkable behaviour: they follow, over more than 10 orders of magnitude, the power-law function: Cm(T)−P. The parameters C and P are energy dependent, but similar for all mesons produced at the same collision energy. This scaling resembles that expected in the statistical description of hadron production: the parameter P plays the role of a temperature and the normalisation constant C is analogous to the system volume. The fundamental difference is, however, in the form of the distribution function. In order to reproduce the experimental results and preserve the basic structure of the statistical approach the Boltzmann factor e−E∗/T appearing in standard statistical mechanics has to be substituted by a power-law factor (E∗/Λ)−P.
Charge fluctuations studied on event-by-event basis have been recently suggested to provide a signal of the equilibrium quark-gluon plasma produced in heavy-ion collisions at high energies. It is argued that the fluctuations generated at the early collision stage when the energy is released can fake the signal. PACS 25.75.-q, 12.38.Mh, 24.60.-k
We consider J/ψ production in heavy ion collisions at RHIC energies in the statistical coalescence model with exact (canonical ensemble) charm conservation. Charm quark–antiquark pairs are assumed to be created in primary hard parton collisions, but open and hidden charm particles are formed at the hadronization stage according to the laws of statistical mechanics. The dependence of the J/ψ production on both the number of nucleon participants and the collision energy is studied. The model predicts J/ψ suppression for low energies, whereas at the highest RHIC energy the model reveals J/ψ enhancement.
The statistical coalescence model for the production of open and hidden charm is considered within the canonical ensemble formulation. The data for the J/psi multiplicity in Pb+Pb collisions at 158 A·GeV are used for the model prediction of the open charm yield which has not yet been measured in these reactions.
We investigate the properties of charge neutral equilibrium cold quark matter within the Nambu Jona-Lasinio model. The calculations are carried out for di erent ratios of coupling constants characterizing the vector and scalar 4 fermion interaction, xi = GV /GS. It is shown that for xi < 0.4 matter is self bound and for xi < 0.65 it has a first order phase transition of the liquid gas type. The Gibbs conditions in the mixed phase are applied for the case of two chemical potentials associated with the baryon number and electric charge. The characteristics of the quark stars are calculated for xi = 0, 0.5 and 1. It is found that the phase transition leads to a strong density variation at the surface of these stars. For xi = 1 the properties of quark stars show behaviors typical for neutron stars. At >< 0.4 the stars near to the maximum mass have a large admixture of strange quarks in their interiors. PACS number: 14.65.-q, 26.60.+c, 97.10.-q
Statistical coalescence model analysis of J / psi production in Pb + Pb collisions at 158 A GeV
(2001)
Production of J/psi mesons in heavy ion collisions is considered within the statistical coalescence model. The model is in agreement with the experi- mental data of the NA50 Collaboration for Pb+Pb collisions at 158 A·GeV in a wide centrality range, including the so called anomalous suppression domain. The model description of the J/ psi data requires, however, strong enhancement of the open charm production in central Pb+Pb collisions. This model prediction may be checked in the future SPS runs.
Alignment, characterization and application of polyfluorene in polarized light-emitting devices
(2001)
Ziel im Rahmen der vorliegenden Dissertation war die Realisierung der polarisierten Elektrolumineszenz blau emittierender flüssigkristalliner Polyfluorene. Polymere Leuchtdioden, die aufgrund hoher Orientierung der Moleküle in der aktiven Schicht polarisiert emittieren, sind für eine Anwendung beispielsweise als Hintergrundbeleuchtung in Flüssigkristallanzeigen (LCDs) von Interesse. Es wurde gezeigt, dass sich mit der Ausrichtung von Polyfluoren auf Ori entierungsschichten auf der Basis von geriebenem Polyimid hohe Ordnungsgrade erzielen lassen. Die Dotierung mit lochleitenden Materialien erlaubte erstmals den Einbau solcher Orientierungsschichten in Leuchtdioden und ermöglichte die Realisierung polarisierter Elektrolumineszenz. Die Morphologie und Struktur sowohl der hoch orientierten Polyfluoren filme als auch lochleitender Orientierungsschichten wurden eingehend untersucht. Die ElektrolumineszenzEigenschaften von isotropen sowie polarisierten Leuchtdioden wurden ausführlich analysiert und anschließend durch chemische Modifizierung des Polyfluorens entscheidend verbessert. Zusätzlich wurde Polyfluoren mit fluoreszierenden Farbstoffen dotiert, um ausgehend von blauem Licht grüne und rote Emission zu erhalten. Hierbei wurde unter sucht, in welchem Maß FörsterEnergietransfer sowie Ladungsträgereinfang für die Emission der eingemischten Farbstoffe verantwortlich sind. Eine Einführung in die Grundlagen der Elektrolumineszenz konjugierter Polymere findet sich in Kapitel 2 dieser Arbeit. Da polarisierte Elektrolumineszenz ein hohes Maß an Anistotropie der emittierenden Schicht erfordert, werden anschließend verschiedene Methoden zur Ausrichtung von Polymeren besprochen, wobei besondere Betonung auf der Orientierung flüssigkristalliner Polymere liegt. Kapitel 3 behandelt die signifikanten Eigenschaften der Polymere sowie die experimentel len Methoden, die im Rahmen dieser Arbeit verwendet wurden. Neben Polyfluoren wird ein weiteres blau emittierendes Polymer, Polyphenylenethynylen (PPE), eingeführt. Bei der Cha rakterisierung der Polyfluorene wird im Anschluss an die Beschreibung der reinen Polymere insbesondere der positive Einfluss des Anbringens von lochleitende Endgruppen an die Hauptkettenenden auf wesentliche Eigenschaften bezüglich der Elektrolumineszenz aufgezeigt. Außerdem werden die wesentlichen Merkmale von Polyimid, welches die Matrix der Orientierungsschicht bildet, sowie von verschiedenen Polymeren, die der Lochleitung und der Lochinjektion dienen, besprochen. Die Beschreibung der Methoden zur Präparation isotroper und polarisierter Leuchtdioden sowie zur Untersuchung der optischen, elektrischen und mor phologischen Eigenschaften der Polymerfilme bilden den Abschluss dieses Abschnitts. Im vierten Kapitel dieser Arbeit werden unterschiedliche Verfahren zur Ausrichtung der Polymermoleküle auf Polyfluoren sowie auf PPE angewandt und hinsichtlich der erreichbaren Ordnungsgrade verglichen und beurteilt. Im Falle von Polyfluoren wurde gezeigt, dass eine Orientierung im flüssigkristallinen Zustand mit Hilfe zusätzlicher Orientierungsschichten, welche auf geriebenem Polyimid basieren, die einzige geeignete Methode zur Orientierung dieses Po lymers ist. Durch den Zusatz von niedrigmolekularen lochleitenden Materialien in geeigneter Konzentration in die PolyimidMatrix konnte das nichtleitende Polyimid so modifiziert wer den, dass es sich in Leuchtdioden einbinden ließ, ohne dass die Orientierungseigenschaften der Schichten verloren gingen. Vergleiche unterschiedlicher Polyfluorene ergaben, dass die Länge und Struktur der AlkylSeitenketten das Orientierungsverhalten entscheiden beeinflussen. Hierbei wurde gezeigt, dass sich für verzweigte Seitenketten deutlich höhere Orientierungsgrade erreichen lassen als für solche mit linearen Seitenketten. Dies wurde mit dem vergrößerten Verhältnis aus Persistenzlänge und Polymerdurchmesser erklärt, was gemäß der Theorie der flüssigkristallinen Polymere zu einer Zunahme des erreichbaren Ordnungsparameter führt. Außerdem wiesen die Absorptionsspektren der Polyfluorene mit langen Seitenketten auf eine planare Konformation der Polymerrückgrate hin, welche aufgrund der starken Wechselwirkung zwischen den einzelnen Ketten eine Orientierung im flüssigkristallinen Zustand verhindert. Von allen untersuchten Polyfluorenen ließ sich Poly(diethylhexylfluoren) (PF2/6) am besten orientieren. Im Gegensatz zu Polyfluoren scheiterte der Versuch, PPE im flüssigkristallinen Zustand auf Orientierungsschichten auszurichten. Kalorimetrische DSCUntersuchungen machten deutlich, dass sich die Struktur von PPE in flüssigkristalliner und kristalliner Phase nur unwesentlich voneinander unterscheiden. In beiden Phasen deuteten Absorptionsuntersuchungen auf eine planare Konformation der PPERückgrate. Die Viskosität des als sehr steif bekannten Polymers PPE ist daher auch in flüssigkristallinem Zustand zu hoch, um eine Umordnung der Moleküle zu verursachen, welche allein durch Wechselwirkung mit einer Orientierungsschicht hervorgerufen wird. PPE konnte jedoch im kristallinen Zustand orientiert werden, indem anstatt einer zusätzlichen Orientierungsschicht der Polymerfilm selbst gerieben wurde. Die hohe Steifigkeit von PPE erlaubte die Übertragung der Kräfte, die durch das Reiben verursacht werden, auf das starre Polymerrückgrat und ermöglichte eine homogene Ausrichtung der Moleküle. Mit Hilfe dieser Methode konnten Leuchtdioden mit PPE in der aktiven Schicht verwirklicht werden, die polarisiert emittierten. Die bestmöglichen Methoden zur Ausrichtung der Moleküle unterschie den sich demnach für die beiden flüssigkristallinen Polymere Polyfluoren und PPE, und für beide Polymere wurden Verfahren gefunden, die die Herstellung von polarisierten Leuchtdioden ermöglichten. In Kapitel 5 dieser Arbeit werden die Morphologie, die Struktur sowie weitere wesentliche Eigenschaften sowohl orientierter Polyfluorenfilme als auch der zur Ausrichtung benötigten lochleitenden Orientierungsschichten aus dotiertem Polyimid besprochen. Hierfür wurden die Filme mit Hilfe von Licht und Elektronenmikroskopie sowie von Elektronen und Röntgen beugungsexperimenten untersucht. Im ersten Teil wird die beobachtete Abnahme der Orien tierbarkeit von Polyfluoren mit zunehmendem Molekulargewicht durch Elektronenbeugungs untersuchungen näher beschrieben. Ergebnisse aus TransmissionsElektronenmikroskopie Untersuchungen zeigten, dass sich die Morphologie orientierter PF2/6Filme durch hochgeordnete Lamellen auszeichnet, welche in regelmäßigen Abständen von ungeordneten Regionen unterbrochen werden. Innerhalb der orientierten Lamellen sortieren sich die Moleküle nach ähnlicher Kettenlänge, wohingegen in den ungeordneten Gebieten vornehmlich die Endgruppen der Ketten vorzufinden sind. Strukturuntersuchungen ergaben, dass die einzelnen Polymerketten von PF2/6 zylindrisch sind und eine hexagonale Packung aufweisen, wobei die Polymerrück grate eine 5/2Helixstruktur bilden. Das wurmähnliche Rückgrat ist dabei zylinderförmig von einer Hülle aus ungeordneten Seitenketten umgeben, die ähnlich wie ein Lösungsmittel zwi schen den einzelnen Ketten wirken. Die hieraus folgende geringe Viskosität des Polymers dient als Erklärung für die beobachtete bessere Orientierbarkeit von PF2/6 im Vergleich zu Polyfluoren mit linearen OktylSeitenketten oder zu PPE. Im zweiten Teil des fünften Kapitels werden Ergebnisse von Untersuchungen der lochlei tenden Orientierungsschichten vorgestellt. Der Einfluss der Zugabe von lochleitenden Materialien zu Polyimid auf mechanische sowie auf elektrische Eigenschaften wurde untersucht. Bei moderater LochleiterKonzentration war die mechanische Stabilität der Filme ausreichend, um nach dem Reiben keine merklichen Unterschiede zu undotierten geriebene Filmen aufzuweisen. Vergleiche entsprechender Filme hinsichtlich Ladungsinjektion und transport zeigten, dass erst durch die Dotierung eine Verwendung von PolyimidOrientierungsschichten in Leuchtdioden ermöglicht wird. Sowohl polymere als auch niedrigmolekulare lochleitende Materialien wur den hinsichtlich der erreichbaren Orientierungsgrade sowie der resultierenden ElektrolumineszenzEigenschaften verglichen, wobei nur letztere in beiden Belangen zugleich zu vorteilhaften Ergebnissen führten. Es wurde gezeigt, dass sich die besten Resultate mit polarisierten Leuchtdioden erzielen ließen, bei denen die emittierende Schicht auf eine DoppelschichtStruktur aufgebracht war, die der Lochinjektion und der Orientierung dienten. Hierbei befand sich oberhalb einer LochinjektionsSchicht aus reinem Lochleitermaterial eine weitere lochleitende Orientie rungsSchicht aus dotiertem Polyimid. Variation der Lochleiterkonzentrationen in Polyimid er gaben, dass die Helligkeit mit zunehmender Konzentration zunahm, wohingegen die erreichten Polarisationsverhältnisse gleichzeitig abnahmen. SEM und AFMUntersuchungen über den Einfluss der Lochleiterkonzentration auf die Schichtmorphologie ergaben, dass diese Beobachtungen durch Phasenseparation und mechanische Beschädigung der Filme zu erklären ist, welche bei Konzentrationen oberhalb 20 Gewichtsprozent eintreten. Im Kapitel 6 wird schließlich die Elektrolumineszenz von Leuchtdioden mit Polyfluoren als emittierende Schicht diskutiert. Zuerst wurde in isotropen Leuchtdioden die günstigste Diodenarchitektur ermittelt sowie die Optimierung der verwendeten Schichten vorgenommen. Die Ergebnisse wurden mit den Kenntnissen kombiniert, die im Rahmen der oben beschriebenen Untersuchungen erworben wurden, um die Herstellung von Leuchtdioden mit hochpolarisierter Emission zu verwirklichen. Blaue Elektrolumineszenz mit einem Emissionsmaximum von 450 nm und einem Polarisationsverhältnis von 21 wurden erzielt, wobei die Leuchtdichte bei einer angelegten Spannung von 18 V etwa 100 cd/m 2 betrug, was der typischen Helligkeit eines Computermonitors entspricht. Alle ElektrolumineszenzEigenschaften ließen sich durch End funktionalisierung des Polyfluorens weiter deutlich verbessern, indem lochleitende TriarylaminDerivate an die Enden der Hauptketten angebracht wurden ('Endcapping'). Der unerwünschte Beitrag zur Emission bei höheren Wellenlängen, welcher im Falle des reinen Polyfluoren beo bachtet wurde und gemeinhin aggregierten Polymermolekülen zugeschrieben wird, wurde durch das Konzept der Endfunktionalisierung wirksam unterdrückt. Außerdem war die Farbstabilität wesentlich verbessert und die Effizienz der Leuchtdioden um mehr als eine Größenordnung höher als bei der Verwendung des reinen Polyfluorens. Diese Beobachtungen wurden mit den elektrochemischen Eigenschaften der Endgruppen erklärt. Letztere wirken als anziehende Fallen für Ladungsträger, was dazu führt, dass die Erzeugung von Exzitonen und die anschließende Rekombination vorwiegend in der Nähe der Kettenenden stattfindet, anstatt wie im Falle des reinen Polyfluorens an weniger effizienten Aggregaten oder Exzimererzeugenden Stellen. Es wurde gezeigt, dass die Endfunktionalisierung weder das Verhalten des Polymers im flüssig-kristallinen Zustand, noch dessen Orientierbarkeit beeinträchtigte. Die Verwendung des modifizierten Polyfluorens erlaubte die Herstellung von polarisierten Leuchtdioden mit einem Polarisationsverhältnis von 22 und einer Leuchtdichte von 200 cd/m 2 bei 19 V, wobei die Schwellspannung auf 7,5 V gesenkt wurde. Dioden mit einem Anisotropiefaktor von 15 er reichten Leuchtdichten von bis zu 800 cd/m 2 . Die Effizienz dieser Leuchtdioden war mit 0,25 cd/A bei ähnlichem Polarisationsverhältnis und Leuchtdichte um mehr als doppelt so hoch wie die bisher berichteten Werte. Die Veränderung der eigentlich blauen Emissionsfarbe durch die Zugabe von Materialien mit niedrigerer Bandlücke in eine Polyfluorenmatrix wird im Kapitel 7 beschrieben. Es wurde gezeigt, dass der Zusatz bereits geringer Konzentrationen eines grün emittierenden Thiophen Farbstoffes das Emissionsspektrum des Polyfluorens entscheidend veränderte und die Realisierung grüner Emission ermöglichte. Genau wie im Falle der nichtemittierenden Lochleiter, die für die Endfunktionalisierung des Polyfluoren verwendet wurden, wirken auch die ThiophenFarbstoffe als effektive Ladungsträgerfallen, was neben der Farbveränderung eine drastische Verbesserung der Leuchtdiodeneffizienzen zur Folge hatte. Darüber hinaus konnte mit Hilfe des dotierten Polyfluorens polarisierte grüne Elektrolumineszenz verwirklicht werden, wobei die Polarisationsverhältnisse Werte von bis zu 30 erreichten, bei einer Leuchtdichte von 600 cd/m 2 und einer Effizienz von 0,3 cd/A. Im Hinblick auf rote Elektrolumineszenz wurden Leuchtdioden mit dendronisierten Pery lenfarbstoffen in der emittierenden Schicht untersucht, zum einen in reiner Form und zum an deren in Mischungen mit Polyfluoren. Hierfür wurden zwei Generationen von Dendrimeren, bestehend aus zentralem PerylendiimidChromophor und PolyphenylenGerüst, mit einer nichtdendronisierten Modellverbindung verglichen. Leuchtdioden mit reinen Filmen der ersten und zweiten Dendrimergeneration emittierten rotes Licht mit CIEKoordinaten (0,627/0,372) und einer Leuchtdichte von bis zu 120 cd/m 2 bei 11 V, wobei die Effizienz allerdings nur 0,03 cd/A betrug. Um die unterschiedlichen Mechanismen zu klären, die zur Emission der Farbstoffmoleküle führen, wurden die Farbstoffe in Polyfluoren beigemischt, und der Einfluss der Dendronisierung auf die Emissionsfarbe und die Intensität der Elektrolumineszenz wurde untersucht. In Photolumineszenz wurde mit zunehmender Dendronisierung eine Abnahme des Förster Energieübertrags vom PolyfluorenWirt zu dem PerylenfarbstoffGast verzeichnet, was zu einen höheren blauen Anteil im Emissionsspektrum führte. Hingegen wurde gezeigt, dass in Elektrolumineszenz die Farbstoffe als Elektronenfallen wirken und die Rekombination der Ladungsträger zu Exzitonen somit vorwiegend auf den Farbstoff anstatt auf den Polyfluorenmolekülen statt findet. Aus diesem Grund war die Betonung der roten Emission in Elektrolumineszenz ungleich stärker als in Photolumineszenz, bei der die rote Emission ausschließlich durch Energieübertrag via Förstertransfer zu Stande kommt. Die Verstärkung einer Farbverschiebung von rot nach blau, die mit zunehmender Dendronisierung und ansteigender Betriebsspannung beo bachtet wurde, konnte qualitativ mit der kinetischen Beeinträchtigung des Elektronenübertrags vom PolyfluorenWirt auf den PerylendiimidChromophor erklärt werden. Der bestmögliche Kompromiss aus roter Farbtiefe und Helligkeit wurde für die Mischung aus Polyfluoren und dem Farbstoff der ersten Dendrimergeneration erzielt. Bei angelegter Spannung von 6,5 V lag die Leuchtdichte bei 100 cd/m 2 und bei 11 V bei 700 cd/m 2 , wobei das Emission bei 600 nm ihr Maximum hatte.
The experiment NA49 at the CERN SPS is a large acceptance detector for charmed hadrons. The identification of neutral strange hadrons Lambda and AntiLambda is based on the measurement of their charged decay particles and the reconstruciton of the decay vertex. The charged particles were measured with the 4 time projection chambers (TPC), two of them are situated inside 2 large dipole magnets, the two others are downstream of the magnet. Lambda and AntiLambda baryons have been measured in central Pb+Pb collisions at 40, 80 and 160 GeV/nucleon over a wide range in rapidity (1 - 5) and transverse momentum (0 - 3 GeV/c). Particle yields and spectra will be shown for the different energies. The results will be put into the existing systematics of Lambda-production as a function of beam energy.
For statistical multifragmentation model the critical indices α′,β,γ′,δ are calculated as functions of the Fisher parameter τ. It is found that these indices have different values than in Fisher's droplet model. Some peculiarities of the scaling relations are discussed. The basic model predicts for the index τ a narrow range of values, 1.799<τ<1.846, which is consistent with two experiments on nuclear multifragmentation.
A medium modified gluon propagator is used to evaluate the scattering cross section for the process gg - gg in the QCD medium by performing an ex- plicit sum over the polarizations of the gluons. We incorporate a magnetic sreening mass from a non - perturbative study. It is shown that the medium modified cross section is finite, divergence free, and is independent of any ad-hoc momentum transfer cut-off parameters. The medium modified finite cross sections are necessary for a realistic investigation of the production and equilibration of the minijet plasma expected at RHIC and LHC PACS: 12.38.Mh; 14.70.Dj; 12.38.Bx; 11.10.Wx
The quark-molecular-dynamics model is used to study microscopically the dynamics of the coloured quark phase and the subsequent hadron formation in relativistic S+Au collisions at the CERN-SPS. Particle spectra and hadron ratios are compared to both data and the results of hadronic transport calculations. The non-equilibrium dynamics of hadronization and the loss of correlation among quarks are studied.
The lightest supersymmetric particle, most likely the neutralino, might account for a large fraction of dark matter in the Universe.We show that the primordial spectrum of density fluctuations in neutralino cold dark matter (CDM) has a sharp cut-off due to two damping mechanisms: collisional damping during the kinetic decoupling of the neutralinos at (10 MeV) and free streaming after last scattering of neutralinos. The cut-off in the primordial spectrum defines a minimal mass for CDM objects in hierarchical structure formation. For typical neutralino and sfermion masses the first gravitionally bound neutralino clouds have masses above 10 -6 M .
We calculate the Gaussian radius parameters of the pion-emitting source in high energy heavy ion collisions, assuming a first order phase transition from a thermalized Quark-Gluon-Plasma (QGP) to a gas of hadrons. Such a model leads to a very long-lived dissipative hadronic rescattering phase which dominates the properties of the two-pion correlation functions. The radii are found to depend only weakly on the thermalization time tau i, the critical temperature T c (and thus the latent heat), and the specific entropy of the QGP. The dissipative hadronic stage enforces large variations of the pion emission times around the mean. Therefore, the model calculations suggest a rapid increase of R out/R side as a function of K T if a thermalized QGP were formed.
We derive the kinetic equation for pure gluon QCD plasma in a general way, applying the background field method. We show that the quantum kinetic equation contains a term as in the classical case, that describes a color charge precession of partons moving in the gauge field. We emphasize that this new term is necessary for the gauge covariance of the resulting equation.
The properties of strange hadronic matter are studied in the context of the modified quark-meson coupling model using two substantially di erent sets of hyperon-hyperon (Y Y ) interactions. The first set is based on the Nijmegen hard core potential model D with slightly attractive Y Y interactions. The second potential set is based on the recent SU(3) extension of the Nijmegen soft-core potential NSC97 with strongly attractive Y Y interactions which may allow for deeply bound hypernuclear matter. The results show that, for the first potential set, the hyperon does not appear at all in the bulk at any baryon density and for all strangeness fractions. The binding energy curves of the resulting N system vary smoothly with density and the system is stable (or metastable if we include the weak force). However, the situation is drastically changed when using the second set where the hyperons appear in the system at large baryon densities above a critical strangeness fraction. We find strange hadronic matter undergoes a first order phase transition from a N system to a N for strangeness fractions fS > 1.2 and baryonic densities exceeding twice ordinary nuclear matter density. Furthermore, it is found that the system built of N is deeply bound. This phase transition a ects significantly the equation of state which becomes much softer and a substantial drop in energy density and pressure are detected as the phase transition takes place. PACS:21.65.+f, 24.85.+p, 12.39Ba
Compelling evidence for the creation of a new form of matter has been claimed to be found in Pb+Pb collisions at SPS. We discuss the uniqueness of often proposed experimental signatures for quark matter formation in relativistic heavy ion collisions. It is demonstrated that so far none of the proposed signals like J/psi meson production/suppression, strangeness enhancement, dileptons, and directed flow unambigiously show that a phase of deconfined matter has been formed in SPS Pb+Pb collisions. We emphasize the need for systematic future measurements to search for simultaneous irregularities in the excitation functions of several observables in order to come close to pinning the properties of hot, dense QCD matter from data.