Refine
Year of publication
- 2020 (137) (remove)
Document Type
- Article (137) (remove)
Language
- English (137) (remove)
Has Fulltext
- yes (137)
Is part of the Bibliography
- no (137)
Keywords
- Hadron-Hadron scattering (experiments) (6)
- Heavy Ion Experiments (4)
- Heavy-ion collision (3)
- Particle and resonance production (2)
- Shear viscosity (2)
- dark energy (2)
- inflation (2)
- 3D printing (1)
- ALICE (1)
- AM-PM noise conversion (1)
Institute
- Physik (137) (remove)
Feasibility, design and sensitivity studies on innovative nuclear reactors that could address the issue of nuclear waste transmutation using fuels enriched in minor actinides, require high accuracy cross section data for a variety of neutron-induced reactions from thermal energies to several tens of MeV. The isotope 241Am (T1/2= 433 years) is present in high-level nuclear waste (HLW), representing about 1.8 % of the actinide mass in spent PWR UOx fuel. Its importance increases with cooling time due to additional production from the β-decay of 241Pu with a half-life of 14.3 years. The production rate of 241 Am in conventional reactors, including its further accumulation through the decay of 241Pu and its destruction through transmutation/incineration are very important parameters for the design of any recycling solution. In the present work, the 241 Am(n,f) reaction cross-section was measured using Micromegas detectors at the Experimental Area 2 of the n_TOF facility at CERN. For the measurement, the 235U(n,f) and 238U(n,f) reference reactions were used for the determination of the neutron flux. In the present work an overview of the experimental setup and the adopted data analysis techniques is given along with preliminary results.
We study D and DS mesons at finite temperature using an effective field theory based on chiral and heavy-quark spin-flavor symmetries within the imaginary-time formalism. Interactions with the light degrees of freedom are unitarized via a Bethe-Salpeter approach, and the D and self-energies are calculated self-consistently. We generate dynamically the e D∗0(2300)and Ds(2317)state, and study their possible identification as the chiral We study Dand Dsmesons at finite temperature using an effective field theory based on chiral and heavy-quark spin-flavor symmetries within the imaginary-time formalism. Interactions with the light degrees of freedom are unitarized via a Bethe-Salpeter approach, and the Dand Dsself-energies are calculated self-consistently. We generate dynamically the D∗0(2300)and Ds(2317)states, and study their possible identification as the chiral partners of the Dand Dsground states, respectively. We show the evolution of their masses and decay widths as functions of temperature, and provide an analysis of the chiral-symmetry restoration in the heavy-flavor sector below the transition temperature. In particular, we analyse the very special case of the D-meson, for which the chiral partner is associated to the double-pole structure of the D∗0(2300).
Rethinking superdeterminism
(2020)
Quantum mechanics has irked physicists ever since its conception more than 100 years ago. While some of the misgivings, such as it being unintuitive, are merely aesthetic, quantum mechanics has one serious shortcoming: it lacks a physical description of the measurement process. This “measurement problem” indicates that quantum mechanics is at least an incomplete theory—good as far as it goes, but missing a piece—or, more radically, is in need of complete overhaul. Here we describe an approach which may provide this sought-for completion or replacement: Superdeterminism. A superdeterministic theory is one which violates the assumption of Statistical Independence (that distributions of hidden variables are independent of measurement settings). Intuition suggests that Statistical Independence is an essential ingredient of any theory of science (never mind physics), and for this reason Superdeterminism is typically discarded swiftly in any discussion of quantum foundations. The purpose of this paper is to explain why the existing objections to Superdeterminism are based on experience with classical physics and linear systems, but that this experience misleads us. Superdeterminism is a promising approach not only to solve the measurement problem, but also to understand the apparent non-locality of quantum physics. Most importantly, we will discuss how it may be possible to test this hypothesis in an (almost) model independent way.
In this paper we present first-order reversal curve (FORC) diagrams of ensembles of three-dimensional Co3Fe nanostructures as 2 × 2 arrays of nano-cubes and nano-trees. The structures are fabricated and investigated by an advanced platform of focused electron beam induced deposition combined with high-resolution detection of magnetic stray fields using a home-built micro-Hall magnetometer based on an AlGaAs/GaAs heterostructure. The experimental FORC diagrams are compared to macrospin simulations for both geometries at different angles of the externally applied magnetic field. The measured FORC diagrams are in good agreement with the simulated ones and reflect non-uniform magnetization reversal dominated by multi-vortex states within, and strong magnetic coupling between, the building blocks of our nanostructures. Thus, a FORC analysis of small arrays of 3D magnetic nanostructures provides more detailed insights into the mechanisms of magnetization reversal beyond standard major hysteresis loop measurements.
Focused electron beam induced deposition (FEBID) is a direct-write nanofabrication technique able to pattern three-dimensional magnetic nanostructures at resolutions comparable to the characteristic magnetic length scales. FEBID is thus a powerful tool for 3D nanomagnetism which enables unique fundamental studies involving complex 3D geometries, as well as nano-prototyping and specialized applications compatible with low throughputs. In this focused review, we discuss recent developments of this technique for applications in 3D nanomagnetism, namely the substantial progress on FEBID computational methods, and new routes followed to tune the magnetic properties of ferromagnetic FEBID materials. We also review a selection of recent works involving FEBID 3D nanostructures in areas such as scanning probe microscopy sensing, magnetic frustration phenomena, curvilinear magnetism, magnonics and fluxonics, offering a wide perspective of the important role FEBID is likely to have in the coming years in the study of new phenomena involving 3D magnetic nanostructures.
Neutron total cross sections are an important source of experimental data in the evaluation of neutron-induced cross sections. The sum of all neutron-induced reaction cross sections can be determined with a precision of a few per cent in a relative measurement. The neutron spectrum of the photoneutron source nELBE extends in the fast region from about 100 keV to 10 MeV and has favourable conditions for transmission measurements due to the low instantaneous flux of neutrons and low gamma-flash background. Several materials of interest (in part included in the CIELO evaluation or on the HPRL of OECD/NEA) have been investigated: 197Au [1, 2], natFe [2], natW [2], 238U, natPt, 4He, natO, natNe, natXe. For gaseous targets high pressure gas cells with flat end-caps have been built that hold up to 200 bar pressure. The experimental setup will be presented including results from several transmission experiments and the data analysis leading to the total cross sections will be discussed.
This work presents, to our knowledge, the first completely passive imaging with human-body-emitted radiation in the lower THz frequency range using a broadband uncooled detector. The sensor consists of a Si CMOS field-effect transistor with an integrated log-spiral THz antenna. This THz sensor was measured to exhibit a rather flat responsivity over the 0.1–1.5-THz frequency range, with values of the optical responsivity and noise-equivalent power of around 40 mA/W and 42 pW/√Hz, respectively. These values are in good agreement with simulations which suggest an even broader flat responsivity range exceeding 2.0 THz. The successful imaging demonstratestheimpressivethermalsensitivitywhichcanbeachievedwithsuchasensor. Recording of a 2.3×7.5-cm2-sized image of the fingers of a hand with a pixel size of 1 mm2 at a scanning speed of 1 mm/s leads to a signal-to-noise ratio of 2 and a noise-equivalent temperature difference of 4.4 K. This approach shows a new sensing approach with field-effect transistors as THz detectors which are usually used for active THz detection.
Envy, the inclination to compare rewards, can be expected to unfold when inequalities in terms of pay-off differences are generated in competitive societies. It is shown that increasing levels of envy lead inevitably to a self-induced separation into a lower and an upper class. Class stratification is Nash stable and strict, with members of the same class receiving identical rewards. Upper-class agents play exclusively pure strategies, all lower-class agents the same mixed strategy. The fraction of upper-class agents decreases progressively with larger levels of envy, until a single upper-class agent is left. Numerical simulations and a complete analytic treatment of a basic reference model, the shopping trouble model, are presented. The properties of the class-stratified society are universal and only indirectly controllable through the underlying utility function, which implies that class-stratified societies are intrinsically resistant to political control. Implications for human societies are discussed. It is pointed out that the repercussions of envy are amplified when societies become increasingly competitive.
Our primary objective is to construct a plausible, unified model of inflation, dark energy and dark matter from a fundamental Lagrangian action first principle, wherein all fundamental ingredients are systematically dynamically generated starting from a very simple model of modified gravity interacting with a single scalar field employing the formalism of non-Riemannian spacetime volume-elements. The non-Riemannian volume element in the initial scalar field action leads to a hidden, nonlinear Noether symmetry which produces an energy-momentum tensor identified as the sum of a dynamically generated cosmological constant and dust-like dark matter. The non-Riemannian volume-element in the initial Einstein–Hilbert action upon passage to the physical Einstein-frame creates, dynamically, a second scalar field with a non-trivial inflationary potential and with an additional interaction with the dynamically generated dark matter. The resulting Einstein-frame action describes a fully dynamically generated inflationary model coupled to dark matter. Numerical results for observables such as the scalar power spectral index and the tensor-to-scalar ratio conform to the latest 2018 PLANCK data.
First, we propose a scale-invariant modified gravity interacting with a neutral scalar inflaton and a Higgs-like SU(2)×U(1) iso-doublet scalar field based on the formalism of non-Riemannian (metric-independent) spacetime volume-elements. This model describes, in the physical Einstein frame, a quintessential inflationary scenario driven by the “inflaton” together with the gravity-“inflaton” assisted dynamical spontaneous SU(2)×U(1) symmetry breaking in the post-inflationary universe, whereas the SU(2)×U(1) symmetry remains intact in the inflationary epoch. Next, we find the explicit representation of the latter quintessential inflationary model with a dynamical Higgs effect as an Eddington-type purely affine gravity.
Direct nanoscopic observation of plasma waves in the channel of a graphene field-effect transistor
(2020)
Plasma waves play an important role in many solid-state phenomena and devices. They also become significant in electronic device structures as the operation frequencies of these devices increase. A prominent example is field-effect transistors (FETs), that witness increased attention for application as rectifying detectors and mixers of electromagnetic waves at gigahertz and terahertz frequencies, where they exhibit very good sensitivity even high above the cut-off frequency defined by the carrier transit time. Transport theory predicts that the coupling of radiation at THz frequencies into the channel of an antenna-coupled FET leads to the development of a gated plasma wave, collectively involving the charge carriers of both the two-dimensional electron gas and the gate electrode. In this paper, we present the first direct visualization of these waves. Employing graphene FETs containing a buried gate electrode, we utilize near-field THz nanoscopy at room temperature to directly probe the envelope function of the electric field amplitude on the exposed graphene sheet and the neighboring antenna regions. Mapping of the field distribution documents that wave injection is unidirectional from the source side since the oscillating electrical potentials on the gate and drain are equalized by capacitive shunting. The plasma waves, excited at 2 THz, are overdamped, and their decay time lies in the range of 25-70 fs. Despite this short decay time, the decay length is rather long, i.e., 0.3-0.5 μm, because of the rather large propagation speed of the plasma waves, which is found to lie in the range of 3.5-7 × 106 m/s, in good agreement with theory. The propagation speed depends only weakly on the gate voltage swing and is consistent with the theoretically predicted 1/4 power law.
A model for the description of proton collisions from molecules composed of atoms such as hydrogen, carbon, nitrogen, oxygen and phosphorus (H, C, N, O, P) was recently extended to treat collisions with multiply charged ions with a focus on net ionization. Here we complement the work by focusing on net capture. The ion–atom collisions are computed using the two-center basis generator method. The atomic net capture cross sections are then used to assemble two models for ion–molecule collisions: An independent atom model (IAM) based on the Bragg additivity rule (labeled IAM-AR), and also the so-called pixel-counting method (IAM-PCM) which introduces dependence on the orientation of the molecule during impact. The IAM-PCM leads to significantly reduced capture cross sections relative to IAM-AR at low energies, since it takes into account the overlap of effective atomic cross sectional areas. We compare our results with available experimental and other theoretical data focusing on water vapor (H2O), methane (CH4) and uracil (C4H4N2O2). For the water molecule target we also provide results from a classical-trajectory Monte Carlo approach that includes dynamical screening effects on projectile and target. For small molecules dominated by a many-electron atom, such as carbon in methane or oxygen in water, we find a saturation phenomenon for higher projectile charges (q=3) and low energies, where the net capture cross section for the molecule is dominated by the net cross section for the many-electron atom, and the net capture cross section is not proportional to the total number of valence electrons.
Safety requirements and the need of low‐migration UV inks have received increasing attention in the packaging industry. Crucial for the development and design of low‐migration UV inkjet inks for migration‐sensitive applications is the polymerization degree. In this study, curing‐behavior of a black, high purity packaging ink (HPP‐ink) was monitored using ATR‐FTIR spectroscopy. UV irradiation of HPP‐ink led to changes in specific absorption bands of the FTIR spectra due to crosslinking reaction of double bonds. Changes in absorptions bands at 1,408 and 1,321 cm−1 permitted the determination of CC conversion of acrylic and vinyl double bond, independently of one another. In addition, a method was developed which allows the investigation of surface‐cure and deep‐cure behavior, separately.
High-quality single crystals of the unconventional superconductor NdFeAsO1 − xFx were grown. We developed a new optimized flux technique to overcome the difficulties in single-crystal growth and the sample quality limitations of NdFeAsO1 − xFx. The normal state of the F-doped samples exhibits simple metallic behavior upon cooling down from room temperature, followed by a sharp superconducting transition. The values of residual resistivity ratio (RRR) is 3.2, 6.4, and 10.3 for x = 0.1, 0.15, and 0.2, respectively. Both the large RRR and the narrow superconducting transition signpost the high quality of the crystals. We have examined the in- and out-of-plane lower critical fields, and the field at which vortices penetrate the sample of NdFeAsO1 − xFx (x = 0.1). The anisotropy ratio [γHc1 (0)] increased slightly with increasing temperature from 0.8 Tc to Tc. The temperature dependence of the first vortex penetration field was obtained under the static magnetic field, H, parallel to the c- and ab- axis, and pronounced changes in the Hc1(T) curvature were observed, which are attributed to the multi-band superconductivity.
We use a set of hadronic equations of state derived from covariant density functional theory to study the impact of their high-density behavior on the properties of rapidly rotating Δ-resonance-admixed hyperonic compact stars. In particular, we explore systematically the effects of variations of the bulk energy isoscalar skewness, Qsat, and the symmetry energy slope, Lsym, on the masses of rapidly rotating compact stars. With models for equation of state satisfying all the modern astrophysical constraints, excessively large gravitational masses of around 2.5M⊙ are only obtained under three conditions: (a) strongly attractive Δ-resonance potential in nuclear matter, (b) maximally fast (Keplerian) rotation, and (c) parameter ranges Qsat≳500 MeV and Lsym≲50 MeV. These values of Qsat and Lsym have a rather small overlap with a large sample (total of about 260) parametrizations of covariant nucleonic density functionals. The extreme nature of requirements (a)-(c) reinforces the theoretical expectation that the secondary object involved in the GW190814 event is likely to be a low-mass black hole rather than a supramassive neutron star.
Neutron capture on 241Am plays an important role in the nuclear energy production and also provides valuable information for the improvement of nuclear models and the statistical interpretation of the nuclear properties. A new experiment to measure the 241Am(n, γ) cross section in the thermal region and the first few resonances below 10 eV has been carried out at EAR2 of the n_TOF facility at CERN. Three neutron-insensitive C6D6 detectors have been used to measure the neutron-capture gamma cascade as a function of the neutron time of flight, and then deduce the neutron capture yield. Preliminary results will be presented and compared with previously obtained results at the same facility in EAR1. In EAR1 the gamma-ray background at thermal energies was about 90% of the signal while in EAR2 is up to a 25 factor much more favorable signal to noise ratio. We also extended the low energy limit down to subthermal energies. This measurement will allow a comparison with neutron capture measurements conducted at reactors and using a different experimental technique.
The hot and dense QCD matter produced in nuclear collisions at ultrarelativistic energy is characterized by very intense electromagnetic fields which attain their maximal strength in the early pre-equilibrium stage and interplay with the strong vorticity induced in the plasma by the large angular momentum of the colliding system. A promising observable keeping trace of these phenomena is the directed flow of light hadrons and heavy mesons produced in symmetric and asymmetric heavy-ion collisions as well as in proton-induced reactions. In particular, the splitting of the directed flow between particles with the same mass but opposite electric charge as a function of rapidity and transverse momentum gives access to the electromagnetic response of medium in all collision stages and in the different colliding systems. The highest influence of the electromagnetic fields is envisaged in the pre-equilibrium stage of the collision and therefore a significant imprint is left on the early-produced heavy quarks. The aim of this review is to discuss the current developments towards the understanding of the generation and relaxation time of the electromagnetic fields embedded in both large and small systems and their impact on the charge-odd directed flow of light and heavy particles, highlighting the experimental results and the different theoretical approaches. Since it is possible to perform realistic simulations of high-energy collisions that incorporate also the generated electromagnetic fields and vorticity, the study of the directed flow can provide unique insight into the early nonequilibrium phase and the ensuing QGP formation and transport properties.
In situ investigation of membrane proteins is a challenging task. Previously we demonstrated that nitroxide labels combined with pulsed ESR spectroscopy is a promising tool for this purpose. However, the nitroxide labels suffer from poor stability, high background labeling, and low sensitivity. Here we show that Finland (FTAM) and OX063 based labels enable labeling of the cobalamin transporter BtuB and BamA, the central component of the β-barrel assembly machinery (BAM) complex, in E coli. Compared to the methanethiosulfonate spin label (MTSL), trityl labels eliminated the background signals and enabled specific in situ labeling of the proteins with high efficiency. The OX063 labels show a long phase memory time (TM) of ≈5 μs. All the trityls enabled distance measurements between BtuB and an orthogonally labeled substrate with high selectivity and sensitivity down to a few μm concentration. Our data corroborate the BtuB and BamA conformations in the cellular environment of E. coli.
Activations with neutrons in the keV energy range were routinely performed at the Karlsruhe Institute of Technology (KIT) in Germany in order to simulate stellar conditions for neutron-capture cross sections. A quasi-Maxwell-Boltzmann neutron spectrum of kT = 25 keV, being of interest for the astrophysical s-process, was produced by the 7Li(p,n) reaction utilizing a 1912 keV proton beam at the Karlsruhe Van de Graaff accelerator. Activated samples resulting in long-lived nuclear reaction products with half-lives in the order of yr 100 Myr were analyzed by Accelerator Mass Spectrometry (AMS). Comparison of the obtained reaction cross sections to literature data from previous Time-of-Flight (ToF) measurements showed that the selected AMS data are systematically lower than the ToF data. To investigate this discrepancy, 54Fe(n,γ)55Fe and 35Cl(n,γ)36Cl reaction cross sections were newly measured at the Frankfurt Neutron Source (FRANZ) in Germany. To complement the existing data, an additional neutron activation of 54Fe and 35Cl at a proton energy of 2 MeV was performed. The results will give implications for the stellar environment at kT = 90 keV, reaching the not yet experimentally explored high-energy s-process range. AMS measurements of the activated samples are scheduled.
A new method of event characterization based on Deep Learning is presented. The PointNet models can be used for fast, online event-by-event impact parameter determination at the CBM experiment. For this study, UrQMD and the CBM detector simulation are used to generate Au+Au collision events at 10 AGeV which are then used to train and evaluate PointNet based architectures. The models can be trained on features like the hit position of particles in the CBM detector planes, tracks reconstructed from the hits or combinations thereof. The Deep Learning models reconstruct impact parameters from 2-14 fm with a mean error varying from -0.33 to 0.22 fm. For impact parameters in the range of 5-14 fm, a model which uses the combination of hit and track information of particles has a relative precision of 4-9% and a mean error of -0.33 to 0.13 fm. In the same range of impact parameters, a model with only track information has a relative precision of 4-10% and a mean error of -0.18 to 0.22 fm. This new method of event-classification is shown to be more accurate and less model dependent than conventional methods and can utilize the performance boost of modern GPU processor units.