Refine
Year of publication
- 2007 (23) (remove)
Document Type
- Doctoral Thesis (23) (remove)
Language
- English (23) (remove)
Has Fulltext
- yes (23)
Is part of the Bibliography
- no (23)
Keywords
- Carrier-Proteine (2)
- Membranproteine (2)
- NMR-Spektroskopie (2)
- Proteinfaltung (2)
- ABC-Transporter (1)
- Aminosäurensequenz (1)
- Biophysik (1)
- Biosensorik (1)
- Blutgefäß (1)
- Blutgefäßsystem (1)
Institute
- Biochemie und Chemie (23) (remove)
The chemiosmotic theory suggested by Peter Mitchell (Mitchell, 1961, Nature 191:144-148; see Mitchell, 1979, Science 206:1148-1159 for review) postulated that the energy released upon the oxidation of electron donor substrates is transiently stored as electrochemical proton potential, delta-p across energy-transducing membranes, which acts then as the driving force for the ATP synthesis. Membrane protein complexes can both generate and utilise a transmembrane electrochemical proton potential, either by transmembrane proton transfer or by transmembrane electron transfer coupled to protolytic reactions on opposite sides of the membrane. The dihaem-containing membrane protein complex quinol:fumarate reductase (QFR) from the anaerobic epsilon-proteobacterium Wolinella succinogenes apparently combines both of these mechanisms (Haas et al, 2005, Biochemistry 44:13949-13961; Lancaster et al, 2005, PNAS 102:18860–18865; Mileni et al, 2005, Biochemistry 44:16718-16728; Madej et al, 2006, EMBO J 25:4963-4970). QFR is the terminal enzyme of anaerobic fumarate respiration that allows bacteria to use fumarate as the terminal electron acceptor (Kröger, 1978, Biochim Biophys Acta 505:129-45; Lancaster, 2004, In: Respiration in Archaea and Bacteria Volume 1:57-85). QFR couples the two-electron reduction of fumarate to succinate to the two-electron oxidation of quinol to quinone. QFR contains two haem b groups bound by the transmembrane subunit C, which are termed the ‘proximal haem’, bP, and the ‘distal haem’, bD, according to the relative proximity to the hydrophilic subunits A and B (Lancaster et al, 1999, Nature 402:377-85). The two-electron transfer via the two haem groups has been proposed (Lancaster, 2002, Biochimica et Biophysica Acta 1565:215-231) and demonstrated (Madej et al, 2006, EMBO J 25:4963-4970) to be coupled to a compensatory, parallel transfer of two protons via a transmembrane proton transfer pathway. The two most prominent constituents of the proposed pathway were suggested to be the haem bD ring C propionate and the side chain of amino-acid residue Glu C180, after which the proton transfer pathway was named the ‘E-pathway’ (Lancaster, 2002, Biochimica et Biophysica Acta 565:215-231). The essential role of Glu C180 was supported by site-directed mutagenesis and structural and functional characterization of the enzyme E180Q, where the Glu C180 was replaced with a Gln residue (Lancaster et al, 2005, PNAS 102:18860–18865). Moreover, multiconformer continuum electrostatics (MCCE) calculations (Haas and Lancaster 2004, Biophys J 87:4298-4315) and Fouriertransformed infrared (FTIR) spectroscopy experiments (Haas et al, 2005, Biochemistry 44:13949-13961) indicated the Glu C180 side chain to undergo a combination of a conformational change and protonation upon haem reduction. The contribution of haem bD propionate is less clear, however, a combination of 13C labelling of the haem propionates with redox-induced FTIR experiments (Mileni et al, 2005, Biochemistry 44:16718-16728) and MCCE calculations (Haas and Lancaster, 2004, Biophys J 87:4298-4315) support a change in protonation, possibly accompanied by a change in environment upon haem reduction. These experiments and their results strongly support the existence of the ‘E-pathway’ which is transiently open during the reduction of the haem groups and blocked in the oxidized state of the enzyme (Lancaster, 2002b, Biochim Biophys Acta 1565:215-231). All available crystal structures of the QFR, however, are those of the oxidized enzyme. Therefore, it is advantageous to perform simulations of various redox states of the enzyme to determine for instance, how the side-chain of Glu C180 and haem bD ring C propionate behave upon changes of the redox states of the haem groups and why is the ‘E-pathway’ blocked in the oxidized state of the enzyme. Although the distal haem ring C propionate and Glu C180 were identified as the most prominent components of the proton transfer pathway, it was not clear, on the basis of the structure, how proton transfer could occur between them. In addition, two constituents are not enough to span the membrane region and the additional participants in the proton transfer pathway must be identified. Since an atomistic investigation of proton transfer in this system is not yet possible experimentally, I used available theoretical methods such as classical molecular dynamics (MD) simulation (Alder and Wainwright, 1959, J Phys Chem 31:459-466; McCammon et al, 1977, Nature 267:585-590) and Q-HOP molecular dynamics (Q-HOP MD) simulation (Lill and Helms, 2001, J Chem Phys 115:7993-8005) to investigate the postulated mechanism of electron coupled proton transfer in QFR. MD simulations allowed us to move away from static difference pictures obtained from FTIR experiments and MCCE calculations. The advantage of the MD simulations over the experiments and the simulations performed so far is that the time-dependent properties could now be analyzed. The behaviour of various residues and their side-chains and any environmental changes may be directly observed during MD simulations. Although classical MD simulations cannot be used to study proton transfer reactions, they can provide information on formation of configurations that would allow either direct proton transfer between donor and acceptor residues or indirect proton transfer mediated by water molecules. To avoid the static protonation of residues which is inherent in classical MD simulations, Q-HOP MD simulations were performed which explicitly describe proton transfer reactions by allowing the change of the protonation state of residues ‘on the fly’. The structures obtained after classical molecular dynamics simulations ....
Seit gezeigt wurde, dass die genetischen Informationen in Form von DNA gespeichert wird, ist das Geheimnis der DNA-Struktur gelöst, der Mechanismus der Gen-Expression und die Rolle der RNA verstanden worden. Das Interesse für die Chemie und die Biologie der Nukleinsäuren ist somit kontinuierlich gewachsen. Besonders interessant ist die RNA, die eine Rolle als ein Vermittler der genetischen Informationen (mRNA) spielt, aber auch als Bote von Aminosäuren (tRNA). Sie ist im Ribosom (rRNA) anwesend, arbeitet als Templat in Telomerasen für DNA-Synthese und hat außerdem wichtige Funktionen in der RNA-Spaltung, z.B. bei Ribozymen wie RNAse P inne. Betreffend bestimmter Spaltstellen in RNA hat auch das Phänomen der siRNA beträchtliche Aufmerksamkeit in diesem Prozess erregt. Der sogenannte RISC-Komplex wird programmiert, einzelsträngige RNA mit hoher Sequenz-Spezifität zu schneiden. Die für die RNA-Interferenz verantwortliche zelluläre Maschinerie ist auch an der Bilbung von MikroRNAs beteiligt. RNA-Interferenz ist heute eines der nützlichsten Werkzeuge in functional genomics geworden. Die große Hoffnung ist, dass es auch vielleicht in der Therapie angewandt werden könnte. Das Thema meiner Doktorarbeit trägt den Titel „Synthesis of Site-Specific Artificial Ribonucleases“. Es beschäftigt sich mit der Entwicklung künstlicher bindungsspezifischer Ribonucleasen. Diese künstlichen Katalysatoren sind im Wesentlichen aus drei Gründen bedeutsam: Zum einen liegt eine mögliche Anwendung in der Affinity-Cleavage (Affinitätsspaltung), eine Technik, die Bindungsstellen von RNA-Liganden durch das kovalente Anbringen eines Reagenzes lokalisiert, das zwischen den Nukleinsäuren schneidet. Zum anderen entsteht die Möglichkeit, neue Werkzeuge für eine gezielte Manipulation großer RNA-Moleküle zu schaffen. Die Vorteile des Ansatzes sind, dass man damit beliebige Zielsequenzen anwählen kann. Das Problem dieser Strategie ist die Notwendigkeit, hohe Genauigkeit im Spaltungssschritt zu erreichen, wie zum Beispiel mit natürlichen Ribozymen. Wichtige Ergebnisse wurden auch während meiner Arbeit erhalten, mit einem Fall von genauer Spaltung zwischen zwei Basen. Der dritte Grund ist die potentielle Anwendung als katalytische antisense-Oligonucleotide in der Chemotherapie. Gegenwärtig existieren zwei Ansätze, unspezifische künstliche RNasen relativ kleiner Größe zu schaffen. Der erste basiert auf Metallkomplexen und führt im Allgemeinen zu höheren Raten. Die Idee ist, ein Metall als elektrophiles Zentrum zur Unterstützung der Transesterfikation zu nutzen. Unter diesen Katalysatoren enthalten die effizientesten Lanthanid-Ionen, Cu2+ und Zn2+. Der zweite Ansatz zielt darauf ab, metallfreie künstliche Ribonucleasen zu entwickeln. Die Vorteile dieser Strategie sind, den Katalysator von der Stabilität der Metallkomplexe, die in vivo problematisch sein könnten, unabhängig zu machen. In diesem Ansatz wird die natürliche Katalyse durch Enzyme simuliert. Zweckmäßige Gruppen mit beschränkter katalytischer Aktivität z.B. als Nucleophile, Säuren oder Basen, werden in einer Weise zusammengesetzt, um Kooperation zu ermöglichen. Potente Katalysatoren können so ohne die Notwendigkeit von Metallen als Cofaktoren erzeugt werden. ...
Transport of proteins into or across cellular membranes is mediated by the conserved and ubiquitous Sec-machinery. The Sec-homologue in the inner membrane of Escherichia coli is SecYEG. Sec-mediated insertion of numerous membrane proteins is aided by YidC, another protein integral to the inner membrane of Escherichia coli. YidC fulfils in addition the integration of a variety of membrane proteins Sec-independently. It belongs to a conserved but structurally uncharacterised family of proteins important for membrane protein biogenesis and comprises homologues in mitochondria and chloroplasts. By modification of a former crystallisation protocol two-dimensional crystals of SecYEG were grown in presence of the signal sequence peptide of LamB. Recording of structural data by electron cryo-microscopy and calculation of a difference structure comparing a former SecYEG projection structure with the one of SecYEG crystallised in presence of the substrate revealed several new and vacant densities. These hint to signal peptide binding close to the translocation pore and to significant rearrangements in proximity to the lateral exit site for transmembrane domains in SecYEG. The difference structure suggests that dimeric SecYEG is an asymmetric molecule consisting of one active and one inactive SecYEG monomer. Detergent removal from a mixture of purified YidC and lipids produced two-dimensional crystals that were highly dependent on the ionic strength and lipid composition for their growth. Electron cryo-microscopy on the frozen-hydrated crystals and image processing visualised structural details at about 10 Å resolution. Averaging two alternative projection structures in p2 and p121_a symmetry, respectively, yielded essentially the same features. Four YidC monomers form one unit cell (dimensions 82 x 71 Å, included angle 85 ° and 90 °, respectively) and seem to be arranged as two sets of dimers integrated in an anti-parallel fashion into the membrane. An area of low density in the centre of each YidC monomer resembles possibly a constriction of the membrane, which could have particular relevance for the integration of substrate proteins into the lipid bilayer.
In this thesis the three dimensional solution strucutre of the RbfA protein from Thermotoga maritima was solved using multidimensional heteronuclear NMR spectroscopy. The RbfA protein binds to the helix I region of the 16S rRNA. To gain insights into the binding mode of RbfA to its target, a second RbfA construct from Helicobacter pylori was used. Comparison of the RbfA proteins with the published structure of RbfA from Escherichia coli, led to studies concerning the differences between proteins from thermophile and mesophile systems. In the second part of this thesis the native binding motive of the RbfA protein was identified. The RbfA protein binds to an alternate helix fold within the pre-sequence of the immature 16S rRNA.
Metabotropic glutamate receptor subtype 7 (mGluR7) belongs to the family of G-protein coupled receptors. mGluR7 is widely distributed in the brain and primarily localized at presynaptic terminals, where it is thought to regulate neurotransmitter release and synaptic plasticity. Studies have shown that the intracellular C-terminal tail of mGluR7 binds a variety of proteins in addition to trimeric G-proteins. These newly identified protein interactions are believed to play a key role in the synaptic targeting and G-protein dependent signaling of mGluR7. Protein interacting with C kinase 1 (PICK1), a PDZ-domain protein, is a strong interaction partner of mGluR7a. In order to investigate the role of PICK1 in the synaptic trafficking and signaling of mGluR7a, a knock-in mouse line in which the interaction of mGluR7a and PICK1 is disrupted was generated. Analysis of the mutant mice by immunocytochemistry and immunoelectron microscopy showed that the synaptic targeting and clustering of mGluR7a was not altered, indicating that PICK1 is not required for mGluR7a receptor membrane trafficking and synaptic localization. However, when the spontaneous synaptic activity of cerebellar granule cell cultures prepared from both wild-type and knock-in mice was monitored, and L-AP4 (400μm) was found to decrease the frequency, but not the amplitude, of spontaneous excitatory currents in wild-type neurons, while no effect of L-AP4 on spontaneous synaptic activity was observed in knock-in neurons. This indicates that PICK1 binding to the C-terminal region of mGluR7a plays an essential role in mGluR7a mediated G-protein signaling. We examined the threshold sensitivity for the convulsant pentetrazole (PTZ) in knock-in mice. It was found that mGluR7a knock-in mice had a greater sensitivity to PTZ than wild-type mice. Moreover, the surface parietal cortex EEG recordings of the mutant mice revealed spontaneous synchronous oscillation, or "spike-and-wave discharges" (SWD), which displayed similar characteristics to absence-like seizures. It was also observed that the knock-in mice responded to pharmacology as human absence epilepsy. These data suggests that the knock-in mice displayed the phenotype of absencelike epilepsy. Furthermore, the behavioral analysis of the mGluR7a knock-in mice showed no deficits in motor coordination, pain sensation, anxiety as well as spatial learning and memory, thus the interaction of mGluR7a and PICK1 appears not to contribute to these physiological processes. Taken together, our data provides evidence for an important role of PICK1 in Gprotein dependent signaling of mGluR7a, whereas PICK1 is not required for synaptic targeting and clustering of mGluR7a. Our results also provide an animal model of absencelike epilepsy generated by disruption of a single mGluR7a-PDZ interaction, thus creating a novel therapeutic target against this neurological disease.
Purification and characterization of heterologously produced cannabinoid receptor 1 and G proteins
(2007)
G protein coupled receptors form the largest group of transmembrane proteins, which are involved in signal transduction and are targeted directly or indirectly by 40-50% of the drugs in the market. Even though a lot of biochemical and pharmacological information was acquired for these receptors in the past decades, structural information is still insufficient. G protein coupled receptors are expressed in a very minute scale in the tissues. Purification of G protein coupled receptors, in amounts needed for structural studies, from native tissue is tedious and almost impossible. To overcome this first hurdle of insufficient protein, several heterologous protein expression systems are being used. Another difficulty in structural determination of a G protein coupled receptor is that it is a membrane protein. Membrane proteins are difficult targets for structural studies. One of the possible reasons is the little hydrophilic surface area on the membrane protein, reducing the chances of crystal contact between the molecules. The present work is an attempt to investigate possible ways to overcome these problems. Aim of the project was to use G proteins to increase the hydrophilic area of the G protein coupled receptor. G protein is a physiological partner to the G protein coupled receptor which makes the complex functionally relevant. In the present work five G alpha proteins were purified to homogeneity by a two step purification using metal affinity and ion-exchange chromatography. The G alpha subunits purified were tested for their detergent susceptibility. It was found that only some G proteins were active in the presence of detergent. Observation from contemporary reports also suggest that the G alpha proteins expressed in Escherichia coli, alone may not be sufficient to bind to the G protein coupled receptors in solution. So the project was extended towards expressing a G protein coupled receptor which was reported to exist in a complex with the G proteins, in the cells. Purifying such a functional complex could be more beneficial to use for crystallization. Cannabinoid receptors were chosen for heterologous expression and purification. Production of recombinant cannabinoid receptor 2 was investigated in Pichia pastoris. The protein obtained was highly heterogenous. There were several oligomeric forms as well as degradation products in the cell membranes. Most of the protein was lost in the purification steps leading to a poor yield. Several oligomeric forms and other impurities were still present in the protein sample after purification. Alternatively, a baculovirus mediated insect cell expression system was investigated, to produce the receptors. Cannabinoid receptor 1 was investigated in insect cell expression system because of its better biochemical understanding and pharmacological importance than cannabinoid receptor 2. Cannabinoid receptor 1 was produced in two forms, a full length and a distal carboxy terminal truncated version. All the several gene constructs made could be expressed in the Spodoptera frugiperda (Sf9) insect cells. Expression levels (Bmax) for the constructs with a decahistidine tag at the amino terminus and Strep-tagII at the carboxy terminus were 40 pmol/mg and 53 pmol/mg respectively, for full length and truncated versions. These expression levels are 2 fold higher than the levels reported till now in the literature. As was quite evident from previous experiences of other research groups, purification of this receptor was a challenge. Protein purified from immobilized metal affinity chromatography (Ni-nitrilo tri acetate)(Ni-NTA) was not even 50% pure. A second purification by immobilized monomeric avidin or Streptactin agarose, making use of Biotag and StreptagII respectively, drastically reduced the protein recovery. Later on, purification of receptor was investigated on different metal chelating resins. His-Select, a Ni-NTA based matrix from Sigma, with much lesser density than Ni-NTA from Qiagen, showed a better purification profile. Purification was optimized to get 80% homogeneity but with low yield (20%). Further efforts are needed to improve the yield and purity of the receptor, to use it for crystallization. Cannabinoid receptors are known to exist in a precoupled form to G proteins in the cells. The existence of such precoupled forms of the receptor was investigated using the fluorescence techniques. Guanosine-5-triphosphate binding assay on the cell membranes, in the absence of agonists confirmed the active precoupled form of the receptor. It was found that it is possible to co-immunoprecipitate the complex. These results show that the truncated cannabinoid receptor can be produced in functional form in insect cells in much higher yields than reported. This receptor exists as a complex with G proteins even in the absence of ligands. It was also shown that the receptor/G protein complex can be coimmunoprecipitated. Further work is required to investigate the possibility of purifying this complex to use it for co-crystallization.
G-protein coupled receptors (GPCRs) comprise the largest superfamily of cell surface receptors and possess a signature motif of seven transmembrane helices. The endothelin B (ETB) receptor is a member of rhodopsin like GPCR family. It plays an important role in vasodilation and is found in the membranes of the endothelial cells enveloping blood vessels. Knowledge of the three-dimensional structure of G-protein coupled receptors in general would significantly add to our understanding of their molecular mechanisms and would be useful in the search for new specific drugs. However, three-dimensional structural analysis will require milligram quantities of pure and homogeneous protein. This dissertation is a study of the production, biochemical characterization and preliminary structural studies of the human ETB G-protein coupled receptor. The present work aimed at elucidating the structure and mechanistic details of function of the receptor by using a combination of X-ray crystallographic and NMR methods for collecting structural data. To obtain homogenous and monodisperse receptor protein preparation for structural and functional studies, we implemented the baculovirus expression system for the production of ETB receptor for the present work. The two step affinity purification ensured capture of full-length receptor. Silver stained SDS-PAGE of the purified receptor-ligand complex indicated greater than 90% protein purity. Based on previous reports, we used the high affinity ligand (endothelin -1) binding to the receptor for co-crystallization of receptor-ligand complex by locking the receptor in the activated conformation. As a prerequisite for 3D crystallization trials, the stability of the detergent solubilized receptor-ligand complex was assessed with respect to pH, temperature and time. Receptor-ligand complex did not show any degradation and aggregation over 6 days at 4°C and 18°C. Interestingly, change of pH suggested that receptor-ligand complex is unstable at lower pH due to possible charge induced conformational changes. In our work, we introduced the idea of using fluorophore labeled ligand for simple visual recognition of the receptor-ligand complex during purification and crystallization. On the other hand, we alternatively used biotinylated endothelin-1 to produce an adequate amount of ligand bound receptor complex, thus ensuring homogeneity of the purified complex for use in structural studies. Thus far, preliminary crystals have been obtained for both the unlabelled ET-1 and fluorophore labeled ET-1 complexed with ETB receptor. Moreover, we performed the systematic investigation of the protein/peptide binding partner for the receptor-ligand complex with the chief aims of stabilizing structure and increasing the possibilities of 3D-crystal contacts. Thus subsequent to formation of receptor-ligand complex, the additional in vitro formation of a ternary arrestin-receptor-ligand complex was also attempted for use in structural studies. We successfully demonstrated that arrestin mutant (R169E) forms a tight complex with ETB receptor regardless of its phosphorylation state. A second approach to get insight into the ETB receptor ligand binding site relied on the use of spin isotope labeled ET-1 ligand peptide by employing solid state MAS NMR method. Preliminary data provided compelling evidence that the C-terminal region of the peptide is immobilized in an ordered environment and presumably bound to the receptor. This indicates that the approach is feasible, although there are difficulties in sample preparation for further spectral measurements and data collection which are currently being discussed in ongoing investigations. At this point of our research work, we initiated a collaborative effort to obtain high yields of pure, active receptor without post translational modifications, from an E. coli cell lysate based in vitro expression system. We successfully optimized the production of homogenous and monodisperse endothelin B receptor in mg amounts. Thus this could potentially provide an alternative source of high quality receptor production in large quantities for immediate crystallization trials. Thus we hope that the results from these investigations can be applied in a more general sense to the production and crystallization of other G protein-coupled receptors.
The retinoic acid related orphan receptor alpha (RORalpha) regulates the expression of various target genes by binding to specific response elements in their promoter region. RORalpha is an interesting pharmaceutical target since it positively affects several pathophysiological processes of clinical relevance. RORalpha enhances the expression of Apo-AI protein, the major constituent of HDL, which is responsible for the cholesterol transportation. RORalpha notably contributes to the bone mineralization and generation of the extracellular bone matrix, demonstrating its involvement in osteoporosis, and by up-regulating the gene for IKBalpha, RORalpha has anti-inflammatory effects. Moreover, RORalpha is necessary for cerebellar development and the maintenance of the mammalian day-night periodicity governed by the core-clock within the suprachiasmatic nuclei. RORalpha receptors have been reported to bind cholesterol, melatonin, or to function ligand-independent. By monomeric binding to the recognition motif AGGTCA preceded by an A/T-rich sequence (ROR response element, RORE), RORalpha constitutively activates gene transcription. However, RORalpha activity is passively suppressed by its opponents RevErbalpha and RevErbbeta, which both bind to the same target sequence. ...
The following thesis is concerned with the elucidation of structural changes of RNA molecules during the time course of dynamic processes that are commonly denoted as folding reactions. In contrast to the field of protein folding, the concept of RNA folding comprises not only folding reactions itself but also refolding- or conformational switching- and assembly processes (see chapter III). The method in this thesis to monitor these diverse processes is high resolution liquid-state NMR spectroscopy. To understand the reactions is of considerable interest, because most biological active RNA molecules function by changing their conformation. This can be either an intrinsic property of their respective sequence or may happen in response to a cellular signal such as small molecular ligand binding (like in the aptamer and riboswitch case), protein or metal binding. The first part of the thesis (chapters II & III) provides a general overview over the field of RNA structure and RNA folding. The two chapters aim at introducing the reader into the current status of research in the field. Chapters II is structured such that primary structure is first described then secondary and tertiary structure elements of RNA structure. A special emphasis is given to bistable RNA systems that are functionally important and represent models to understand fundamental questions of RNA conformational switching. RNA folding in vitro as well as in vivo situations is discussed in Chapter III. The following chapters IV and V also belong to the introduction part and review critically the NMR methods that were used to understand the nature and the dynamics of the conformational/structural transitions in RNA. A general overview of NMR methods quantifying dynamics of biomolecules is provided in chapter IV. A detailed discussion of solvent exchange rates and time-resolved NMR, as the two major techniques used, follows. In the final chapter V of the first part the NMR parameters used in structure calculation and structure calculation itself are conferred. The second part of the thesis, which is the cumulative part, encompasses the conducted original work. Chapter VI reviews the general NMR techniques applied and explains their applicability in the field of RNA structural and biochemical studies in several model cases. Chapter VII describes the achievement of a complete resonance assignment of an RNA model molecule (14mer cUUCGg tetral-loop RNA) and introduces a new technique to assign quaternary carbon resonances of the nucleobases. Furthermore, it reports on a conformational analysis of the sugar backbone in this RNA hairpin molecule in conjunction with a parameterization of 1J scalar couplings. Achievements: • Establishment of two new NMR pulse-sequences facilitating the assignment of quaternary carbons in RNA nucleobases • First complete (99.5%) NMR resonance assignment of an RNA molecule (14mer) including 1H, 13C, 15N, 31P resonances • Description of RNA backbone conformation by a complete set of NMR parameters • Description of the backbone conformational dependence in RNA of new NMR parameters (1J scalar couplings) Chapters VII & VIII summarize the real-NMR studies that were conducted to elucidate the conformational switching events of several RNA systems. Chapter VIII gives an overview on the experiments that were accomplished on three different bistable RNAs. These molecules where chosen to be good model systems for RNA refolding reactions and so consequently served as reporters of conformational switching events of RNA secondary structure elements. Achievements: • First kinetic studies of RNA refolding reactions with atomic resolution by NMR • Application of [new] RT-NMR techniques either regarding the photolytic initiation of the reaction or regarding the readout of the reaction • Discovery of different RNA refolding mechanisms for different RNA molecules Deciphering of a general rule for RNA refolding methodology to conformational switching processes of RNA tertiary structure elements. The models for these processes were a) the guanine-dependent riboswitch RNA and b) the minimal hammerhead ribozyme. Achievements: • NMR spectroscopic assignment of imino-resonances of the hypoxanthine bound guanine-dependent riboswitch RNA • Application of RT-NMR techniques to monitor the ligand induced conformational switch of the aptamer domain of the guanine-dependent riboswitch RNA at atomic resolution • Translation of kinetic information into structural information • Deciphering a folding mechanism for the guanine riboswitch aptamer domain • Application of RT-NMR techniques to monitor the reaction of the catalytically active mHHR RNA at atomic resolution In the appendices the new NMR pulse-sequences and the experimental parameters are described, which are not explicitly treated in the respective manuscripts.
The formation and maintenance of a defined three-dimensional structure is a prerequisite for most proteins in order to fulfill their function in the native context. However, there are proteins, which are intrinsically unstructured and thus natively unfolded. In addition, the misfolding and aggregation of many proteins can lead to severe diseases. The investigation of non-native states of proteins significantly contributes to the understanding of protein folding and misfolding. Nuclear magnetic resonance (NMR) spectroscopy is the only known technique that can provide information on structure and dynamics of non-native states of proteins at atomic resolution. Unfolded and non-native states of proteins have to be treated as ensembles of rapidly interconverting conformers and their observed properties are ensemble and time averaged. In this thesis, hen egg white lysozyme (HEWL) and mutants thereof have been investigated by NMR spectroscopy. The reduction of its four disulfide bridges and the successive methylation of the cysteine residues renders HEWL permanently non-native (‘HEWL-SMe’). Alternatively, the exchange of the eight cysteines for alanines results in very similar states (‘all-Ala-HEWL’). Under these conditions, HEWL-SMe and all-Ala-HEWL do not resemble random coil conformations, but exhibit residual secondary and tertiary structure. The presence of hydrophobic clusters and long-range interactions around the proteins six tryptophan residues and the modulation of these properties by single-point mutants has been observed. For the NMR spectroscopic investigation, HEWL has been isotopically labelled in E. coli by expression into inclusion bodies. After purification, the 1HN, 15NH, 13Calpha, 13Cbeta, 13C’, 1Halpha and 1Hbeta resonances of HEWL-SMe and all-Ala-HEWL have been assigned almost completely using three-dimensional NMR experiments. The analysis of secondary chemical shifts revealed regions in the proteins sequence — particularly around the six tryptophan residues—with significantly populated alpha-helix like conformations. In order to further elucidate the influence of the tryptophan side chains, a set of two new pulse sequences has been developed that allowed for the successful assignment of the 13Cg, 15Ne and 1HNe resonances in these side chains. This knowledge was eventually exploited in the interpretation of two-dimensional 15N-1H photo-CIDNP spectra, which revealed a differential solvent accessibility of the tryptophan residues in all-Ala-HEWL but not in the single point mutant W62G-all-Ala-HEWL. In addition, heteronuclear R2 relaxation rates have been determined for the indole 15Ne nuclei of all-Ala-HEWL and W62G. While in the wild-type like all-Ala-HEWL, the rates are different among the six tryptophan residues, in W62G they are more uniform. Together with relaxation data from the amide backbone, these results indicate the significant destabilization of the hydrophobic clusters in the absence of W62. In contrast, in the W108G mutant the profile of the R2 relaxation rates was not found to be significantly altered. No evidence was found by R1rho relaxation rates and relaxation dispersion measurements for conformational exchange on slower (micro- to millisecond) timescales. Residual dipolar couplings have been determined for non-native HEWL in order to retrieve structural information of these states. The differences of the W62G and the wild-type like non-native HEWL is also picked up in NH-RDCs of these proteins aligned in polyacrylamide gels. Significant positive RDCs are observed in the regions of the hydrophobic clusters in all-Ala-HEWL, but to a much lesser degree in W62G. So far, all attempts to simulate RDCs from generated non-native ensembles failed even when including long-range contacts or specific phi/psi backbone angle propensities. However, the measured RDCs can be used to cross-validate structural ensembles of non-native HEWL generated by molecular dynamics simulations that are based on restraints from the other experimental data, such as the differential solvent accessibilities from the photo-CIDNP experiments and the data on the hydrophobic clustering gained from the combined mutational and relaxation studies. Finally, non-native HEWL has been investigated for the first time using two-dimensional NMR in organic solvents, which are able to induce secondary structures and ultimately lead to amyloid formation. Under these conditions severe line broadening was observed, which was attributed to exchange between different — mostly a-helical— conformations. In summary, in this thesis methods have been developed, optimized and successfully applied for the structural and dynamical characterization of non-native states of proteins and the effect of single-point mutants on the properties of such ensembles has been investigated. Data has been gained that can considerably contribute to the further elucidation of the nature of non-native states of HEWL by molecular dynamics simulations.
First milestone of this Ph.D. thesis was the successful extension of conventional NTA/His-tag technique to self-assembling, multivalent chelator thiols for high-affinity recognition as well as stable and uniform immobilization of His-tagged proteins on chip surfaces. Bis-NTA was linked via an oligoethylene glycol to alkyl thiols by an efficient modular synthesis strategy yielding a novel, multivalent compound for formation of mixed SAMs with anti-adsorptive matrix thiols on gold. Multivalent chelator chips allow a specific, high-affinity, reversible, long-term immobilization of His-tagged proteins. In AFM studies reversibility of the specific protein immobilization process was visualized at single molecule level. The entire control over the orientation of the immobilized protein promotes this chip surface to an optimal platform for studies focusing on research targets at single molecule level and nanobiotechnology. Based on the constructed protein chip platform above and a novel AFM mode (contact oscillation mode, COM) – developed during the current Ph.D. work – protein nanolithography under physiological conditions enabling fabrication of active biomolecular patterns in countless variety has been established. Reversible COM-mediated nanostructuring is exceptionally suitable for multiplexed patterning of protein assemblies in situ. The first selfassembled protein layer acts as a biocompatible and ductile patterning material. Immobilized proteins can be replaced by the AFM tip applying COM, and the generated structures can be erased and refilled with different proteins, which are immobilized in a uniform and functional manner. Multi-protein arrays can be systematically fabricated by iterative erase-and-write processes, and employed for protein-protein interaction analysis. Fabrication of two-dimensionally arranged nanocatalytic centres with biological activity will establish a versatile tool for nanobiotechnology. As an alternative chip fabrication approach, the combined application of methodologies from surface chemistry, semiconductor technology, and chemical biology demonstrated successfully how pre-patterned templates for micro- and nanoarrays for protein chips are fabricated. The surface physical, as well the biophysical experiments, proved the functionality of this technology. The promises of such process technology are fast and economic fabrication of ready-to-use nanostructured biochips at industrial scale. Membrane proteins are complicated in handling and hence require sophisticated solutions for chip technological application. A silicon-on-insulator (SOI) chip substrate with microcavities and nanopores was employed for first technological investigation to construct a protein chip suitable for membrane proteins. The formation of an artificial lipid bilayer using vesicle fusion on oxidized SOI cavity substrates was verified by CLSM. Future AFM experiments will give further insights into the chip architecture and topography. This will provide last evidence of the sealing of the cavity by the lipid bilayer. Transmembrane proteins will be employed for reconstitution experiments on this membrane protein chip platform. Highly integrated microdevices will find application in basic biomedical and pharmaceutical research, whereas robust and portable point-of-care devices will be used in clinical settings.
Die vorliegende Arbeit behandelt die Entwicklung und Überprüfung von Modellen zur Berechnung von Schwingungspektren von Peptiden und Proteinen. Solche Modelle verbinden die Konformationsstruktur eines Moleküls mit seinen Schwingungseigenschaften und sind demzufolge wichtig für die Interpretation der Schwingungspektren. Die im Rahmen dieser Arbeit durchgeführte theoretische Erforschung dieses Gebietes beschränkt sich auf die Betrachtung der Amide-I-Moden, welche aufgrund ihrer physikalischen Eigenschaften sich zur Untersuchung der Peptidkonformationen eignen. Die Arbeit kann prinzipiell in zwei Teile separiert werden. In dem ersten Teil werden Fragen betrachtet, die mit der Entwicklung des Schwingungshamiltonian verbunden sind. Im zweiten Teil wurden die erhaltenen Hamiltonian für die Berechnung der Schwingungspektren verwendet. Bei der Berechnung der Schwingungspektren wurden verschiedene spektroskopische Näherungen verwendet und erforscht. Die Entwicklung des Schwingungshamiltonian beinhaltet zwei Aufgaben. Die ab initio Parametrisierung des Schwingungshamiltonian von Dipeptiden, sowie die Analyse der Entwicklungsmethoden für Schwingungshamiltonian von Polypeptiden. Die Entwicklungsmethoden stützen sich auf ab initio berecheten Schwingungseigenschaften von Dipeptiden und/oder elektrostatische Modelle. Die ab initio Parametrisierung basiert auf einer Geometrieoptimierung und anschließender Berechnung von Normalmoden. Hierbei wurde die Abhängigkeit der Ergebnisse vom theoretischen Niveau und dem verwendeten Basissatz untersucht. Die Transformation der errechneten Normalmoden lieferte die Schwingungseigenschaften der lokale Amide-I-Mode. Die Lokalisierung der Normalmode folgt diversen Kriterien. Sie ist von der Wahl der Lokalmoden und somit implizit auch von der Art der Geometrieoptimierung abhängig. Mit dieser Arbeit konnte die Abhängigkeit der Ergebnisse von der Parameterwahl weitgehend aufgeklärt und eine für das Amide-I-System geeignet Parametrisierung gefunden werden. Im nächsten Arbeitsschritt wurde die Abhängigkeit der Amide-I-Schwingungseigenschaften von den Peptidseitenketten und terminalen Gruppen untersucht. Desweiteren wurden Methoden zur Formulierung der Hamiltonian für Polypeptide konzeptionell entwickelt. Diese Untersuchung ist außerordentlich wichtig, da direkte quantenmechanische Berechnungen von Polypeptiden zu zeitaufwendig sind. Solche Methoden beruhen auf dem sogenannten “Building-Block”-Ansatz und verschiedenen elektrostatischen Modellen. In dieser Arbeit wurden sowohl die einzelnen Methoden als auch ihre Kombination für die Entwicklung des Hamiltonians verwendet. Zur Abschätzung der Genauigkeit der verwendeten Methoden wurden Vergleichsrechnungen durchgeführt. Im zweiten Teil dieser Arbeit wurden die erhaltenen Schwingungshamiltonian zur Berechnung von Schwingungsspektren diverser gelöster Peptide angewandt. In diesem Zusammenhang konnte die Genauigkeit unterschiedlicher spektroskopischer Approximationen überprüft werden. Auf Grundlage der erhaltenen Ergebnisse können wir sagen, dass eine angemessene Beschreibung der konformationellen Verteilung und eine korrekte Berechnung des dynamischen Absorptionsspektrum gewährleistet ist. Was noch fehlt, ist ein hinreichend genaues quantenchemisches Modell für die Schwingungsfrequenzen eines gelösten Peptids. Diese Aufgabe stellt zur Zeit ein aktives Forschungsgebiet dar. Zuletzt wurde das Schwingungsspektrum eines sogenanten “Photoschaltbaren”-Peptids simuliert. Mit Hilfe des dafür aufgestellten Hamiltonians ist man in der Lage spektroskopische Beobachtungen auf Konformationsänderungen direkt zu übertragen.
A detailed understanding of how potassium channels function is crucial e. g. for the development of drugs, which could lead to novel therapeutic concepts for diseases ranging from diabetes to cardiac abnormalities. An improved understanding of channel structure may allow researchers to design medication that can restore proper function of these channels. This is particularly important for KCNQ channels, since four out of five family members are involved in human inherited disease. In addition to structure and function relationships the determinants which govern assembly of KCNQ subunits are decisive to understand the physiological role of the KCNQ channel family members. Many details of KCNQ channel assembly remain incompletely understood. Previous work has shown that the subunit-specific heteromerisation between KCNQ subunits is determined by a ~115 amino acid-long subunit interaction domain (si) within the C-terminus (Schwake et al., 2003). Recently, Jenke et al. (2003) proposed that the C-terminal domains in eag and erg K+ channels act as sites which drive tetramerization. From their ability to form coiled coils, these domains were referred to as tetramerizing coiled-coil (TCC) sequences. Jenke et al. also pointed out that KCNQ channels contain bipartite TCC motifs within their C-termini, exactly within the si domain, which is responsible for the subunit-specific interaction pattern. The first part of this thesis was dedicated to determine the individual role of these TCC domains on homomeric and heteromeric channel formation in order to further characterize the molecular determinants of KCNQ channel assembly. In the second part of this thesis cystein-scanning mutagenesis was employed, followed by thiol-specific modification using MTS reagents to screen more than 20 residues in the S3-S4 linker region and in the S4 transmembrane domain of the KCNQ1 channel to gain information about residue accessibility, the functional effects of thiol-modifying reagents (MTSES), and effects of crosslinking selected pairs of Cys residues by Cd+ ions, which could be used for testing model predictions based upon known Kv channel structures from the literature. According to homology modelling based on the Kv1.2 structure it was attempted to determine the proximity of individual residues from different transmembrane segments using the metal bridge approach (crosslinking by Cd+ ions). This led us to derive structural constraints for interactions between the S4 voltage sensor and adjacent transmembrane segments of KCNQ1. Similar studies have previously been performed on the Shaker K+ channel, which has served as a paradigm for structure-function research of voltage-gated K+ channels for a long time, but little is known for KCNQ channels concerning their similarity to published K+ channel structures.
Das genetische Material der Zellen besteht aus Molekülketten der Desoxyribonukleinsäure (DNA), die ein Träger der Erbinformation ist. In normalen Körperzellen wird die Erbinformation der DNA in eine andere Molekülkette, die sogenannte Ribonukleinsäure (RNA), übersetzt. Die RNA reguliert die Bildung von neuem Protein in der Zelle. Dass die RNA nicht bloß ein „Stempel“ ist, der die Informationen der DNA weitervermittelt, darin sind sich die Experten heute einig. RNA-Moleküle können Informationen speichern, katalytische Aktivitäten entfalten, sich perfekt tarnen, und sie regulieren auch als Produkt ihre eigene Synthese. Manche Viren enthalten ebenfalls RNA (oder DNA) und können so den Produktionsapparat der Zelle täuschen. Erkenntnisse über die Wechselwirkung dieser RNA mit natürlichen und synthetischen Liganden können zur Suche nach potentiellen Wirkstoffen beitragen. Nukleinsäuren sind lineare Biopolymere von grundlegenden Untereinheiten, die Nukleotide genannt werden und aus Adenin (A), Cytosin (C), Guanin (G), Urazil (U), und Thymin (T) zusammengesetzt sind. Sie sind jedoch in der Lage sich zu falten und so eine Doppel-Helixstruktur auszubilden. Diese besteht größtenteils aus den bekannten "Watson-Crick-Basenpaaren" (G-C und A-U oder A-T), die zur Stabilität der Struktur beitragen, sowie aus den weniger stabilen G-U-Paaren. Durch die Wechselwirkung zwischen verschiedenen Sekundärstrukturelementen entstehen Tertiärstrukturelemente, deren Struktur und Dynamik oft nur schwer experimentell zu bestimmen sind. Fortschritte in der RNA-Strukturanalyse wurden durch Röntgenkristallographie und Kernresonanzspektroskopie (NMR) möglich. Durch die Röntgenkristallographie wurden viele RNA-Eigenschaften festgestellt. Allerdings besteht keine Kristallstruktur für alle mögliche Einzelnfaser-RNA-Haarnadeln, weil diese immer dazu neigen, in eine linearen doppelte Faserform zu kristallisieren, die geringe biologische Bedeutung hat. Außerdem wurde mit Hilfe der NMR-Spektroskopie das dynamische Verhalten von RNA, z.B. Entfaltungsprozesse bei ansteigender Temperatur, beobachtet. Jedoch erlauben diese experimentellen Daten oft keine direkte mikroskopische Beschreibung der molekularen Prozesse. Molekulardynamik (MD)-Simulationen von biologischen Systemen ermöglichen es hingegen, diese Prozesse in atomischem Detail zu untersuchen. Die MD-Simulation beschreibt ein molekulares System auf atomarer Ebene mit Hilfe der klassischen Mechanik. Kräfte werden von empirischen Potentialen abgeleitet. Sie liefern zeitabhängige Trajektorien, die sich aus den Newton'schen Bewegungsgleichungen ergeben. Durch verbesserte Computerleistung, bessere Kraftfelder, und neu entwickelte genauere Methoden stimmen heutzutage MD-Simulationen von RNA mit experimentellen Daten immer besser überein. In meiner Doktorarbeit wurden MD-Simulationen durchgeführt um die Dynamik, die Struktur und insbesondere die Stabilität von RNA-Hairpins theoretisch zu beschreiben, um so ein erweitertes Verständnis für die dynamischen Vorgänge zu erhalten. Auch der SFB 579 der Universität Frankfurt beschäftigt sich mit RNA-Systemen. Erforscht wird unter anderem der D-Loop des Coxsackievirus B3 (CVB3), der Virenmyocarditis verursacht. Die Interpretation dieser experimentellen Daten wird durch MD-Simulation möglich. In dieser Arbeit wurden das GROMACS Software-Paket und das AMBER Kraftfeld verwendet, um das strukturelle, dynamische und thermische Verhalten der RNA-Hairpins mit Hilfe von MD-Simulationen auf atomarer Ebene zu untersuchen. Betrachtet wurden die 14-mer RNA-Hairpins, uCACGg und cUUCGg. Die verfügbaren NMR-Strukturen zeigen, dass das uCACGg-Tetraloop auffallend ähnlich in der gesamten Geometrie und den Wasserstoffbindungen zu der experimentellen Struktur des cUUCGg-Tetraloop ist, obwohl die schließende Basenpaarsequenz der beiden Tetraloops unterschiedlich sind. Trotz beachtlicher struktureller Ähnlichkeit unterscheiden sich allerdings die uCACGg und cUUCGg Tetraloops in Funktionalität und Thermostabilität. Zunächst orientiert sich unser erstes Bemühen an der Frage nach einem guten Modell für RNA-Hairpins und Simulationsbedingungen, um die zu untersuchenden RNA-Hairpins in Wasser möglichst realitätsnah zu simulieren. Erstens werden drei Versionen des biomolekularen AMBER-Kraftfelds geprüft, indem man die 60 ns Simulationen des 14-mer uCACGg-Hairpins durchführt. Die simulierten strukturellen Eigenschaften und Atomfluktuationen zeigen hohe Ähnlichkeiten in den drei Kraftfeldern. Darüber hinaus stimmen die von MD-Simulationen berechneten Atomkernabstände mit den experimentellen NMR-Daten gut überein. Die gute Übereinstimmung zwischen den Simulationen und den strukturellen NMR Daten belegt die Fähigkeit des AMBER-Kraftfelds zur Beschreibung der strukturellen Eigenschaft von kleinen RNA-Hairpins. Anschließend werden die Einflüsse der Methoden, welche die langreichweitigen, elektrostatischen Wechselwirkungen beschreiben, auf die strukturellen Eigenschaften untersucht. Insbesondere werden die Ergebnisse der Reaktionfeld-Methode mit denen der Particle Mesh Ewald (PME)-Methode verglichen. Es zeigt sich, dass die PME-Methode die elektrostatischen Wechselwirkungen am besten beschreibt, auch wenn die Simulationen der beiden Methoden Ähnlichkeit in der Struktur-Stabilität und der Atomfluktuation bei niedriger Natriumkonzentration aufweisen. Drittens wird der Kationseffekt auf die RNA-Stabilität untersucht. Betrachtet wurden zwei unterschiedliche Kationen (ein- und zweiwertig) und verschiedene Konzentrationen. Die Simulationen weisen darauf hin, dass sich die Metallionen in der Affinität zum RNA-Hairpin unterscheiden, wenn Na+ und/oder Mg2+ als Gegenionen verwendet werden. Weiterhin wird gezeigt, dass sich die bevorzugten Positionen der Na+-Ionen in der großen Furche (major groove) des RNA-Hairpins befinden. Insbesondere die Anlagerungsort der Na+-Ionen liegen in der Nähe des schließenden Basenpaar U5-G10. Im Vergleich zu Na+-Ionen lagern sich Mg2+-Ionen sowohl an die RNA-Basen U3, A4-U11, und die Phosphat-Gruppe, als auch an das schließenden Basenpaar U5-G10 an. Bestätigt werden die Modelle und Simulationsbedingungen durch den Vergleich von Parametern, die sowohl experimentell als auch durch Simulationen ermittelt werden können. Ferner erlauben MD-Simulationen Einblick in das System, indem sie detallierte Konformations- und andere Verteilungen liefern. In der vorliegenden Arbeit wurden die Einflüsse der Loopsequenz und des schließenden Basenpaares auf die Verteilung der Konformationen, der internen Bewegungen, und auf die Thermostabilität von zwei RNA-Hairpins mit Hilfe dieser Modelle untersucht. Zunächst wurden die strukturellen Eigenschaften bei Raumtemperatur ausgewertet. Die starken strukturellen Ähnlichkeiten und die gute Übereinstimmung mit NMR-Daten bestätigen die Hypothese, dass die zwei Tetraloops zur gleichen “erweiterten” RNA-Familie gehören. Diese zwei Hairpins haben ähnliche Lösemittelzugängliche Oberflächen (solvent accessible surface), wobei deren Lösemittel zugänglichen funktionellen Gruppen unterschiedlich sind. Weiterhin weist das uCACGg-Hairpin eine stärkere Tendenz auf Wasserstoffe abzugeben als das cUUCGg-Hairpin, was in den unterschiedlichen Bindungsaffinitäten zwischen diesen Hairpins und der viralen Protease begründet liegt. Darüber hinaus wurde der Faltungs- und Entfaltungsprozess mit Hilfe der Replica-Exchange-Molekulardynamik-Simulationen untersucht. Diese Untersuchung zielt auf das bessere Verständnis der unterschiedlichen Thermostabilität der Hairpins, indem sie die möglichen Zwischenprodukte im atomaren Detail liefern. Sowohl experimentell als auch von den MD-Simulationen ergibt sich eine Differenz in den Schmelztemperaturen der beiden Hairpins von ungefähr 20 K. Allerdings sind die von MD beobachteten Schmelztemperaturen 20 % höher als die von Experiment zu ansehende Wert. Die Ergebnisse machen deutlich, dass die Schmelztemperaturdifferenz nicht auf die Unterschiede in der Sequenz, in der Struktur, oder in der Dynamik der Loops zurückführen sind, sondern auf die Unterschiede der Basenpaaren in den Stämmen. Weiterhin wird gezeigt, dass sich das uCACGg-Hairpin einerseits kooperativ entfaltet, und die Entfaltung des cCACGg-Hairpins anderseits weniger kooperativ stattfindet. Um die schnelle interne Dynamik der uCACGg- und cUUCGg-Hairpins zu untersuchen, erlauben die Simulationen von 50 ns eine akurate Beschreibung der schnellen internen Bewegung der RNA-Hairpin, obwohl der den Hairpins zugängliche Konformationsraum nicht vollständig abgedeckt wird. Die NMR-Relaxationsparameter, die mit Hilfe der MD-Simulationen zurückgerechnet wurden, bestätigen das Modell und die Simulationsbedingungen der MD-Simulationen. Im Hinblick auf die Übereinstimmung kann man den besten Ansatz zur Berechnung der NMR-Ordnungsparameter bestimmen. In dieser Arbeit wurden drei verschiedene Ansätze angewandt, nämlich das Fitting von 100 ps auf modellfreiem Ansatz nach Lipari-Szabo, equilibrium average, und das Gaussian Axial Fluctuation (GAF)-Modell. Die zwei letzteren können nur qualitativ mit den experimentellen Daten übereinstimmen. Die NMR-Ordnungsparameter können mit Hilfe des Modells von Lipari-Szabo richtig ermittelt werden, wenn sich die interne Bewegung in kleineren Zeitskalen als zur Gesamtbewegung vollzieht. Vorausetzung für die Berechnung dieses Modells ist aber, dass das Fitting der internen Korrelationsfunktionen nur auf den ersten Teil von 100 ps der Korrelationsfunktionen eingesetzt wird. Die berechneten Ordnungsparameter deuten auf ein unterschiedliches Verhalten der beiden Hairpins besonders im Loop-Bereich hin. Die konformationelle Umordnung, die beim UUCG-Loop beobachtet wurde, tritt beim CACG-Loop nicht ein. Zusammenfassend lässt sich sagen, dass es durch den Einsatz von MD Simulationen ermöglicht wird, die strukturellen und dynamischen Eigenschaften der RNA-Systeme auf atomarer Ebene zu untersuchen. Als Schlussfolgerung zeigt diese Doktorarbeit, dass sich die Studie der konformationell Dynamik der RNA-Systeme durch die Kombination aus MD-Simulation und NMR-Spektroskopie sowie der Leistungsfähigkeit der MD-Simulationen, die die interne Bewegungen deutlich beschreiben können, untersuchen lässt.
The ABC protein ABCE1, also called HP68 or RNase L inhibitor (RLI), is one of the most conserved proteins in evolution. It is universally expressed in eukaryotes and archaea, where ABCE1 is essential for life. ABCE1 plays a crucial role in translation initiation and ribosome biogenesis, however, the molecular mechanism of ABCE1 remains unclear. In addition to two ABC ATPase domains, ABCE1 contains a unique N-terminal region with eight conserved cysteines predicted to coordinate iron-sulfur (Fe-S) clusters. To analyze the function of ABCE1, the hyperthermophilic crenarchaeote Sulfolobus solfataricus was chosen as a model system. S. solfataricus ABCE1 was overexpressed homologously in S. solfataricus and heterologously in E. coli. Noteworthy, for tagged-protein production in S. solfataricus a novel expression system based on a virus shuttle vector was established. This is the first example for a successful overexpression and purification of isolated full-length ABCE1. For the first time it was shown that ABCE1 indeed bears biochemical properties of an ABC protein even though it has unique features. Remarkably, the nucleotide binding domains (NBDs) of ABCE1 bound ATP and AMP, but were functionally non-equivalent in ATP hydrolysis. Mutations of conserved residues in the second NBD led to a hyperactive ATPase, which implies an intramolecular mechanism of dimer formation. Truncation of the Fe-S cluster domains did not influence ATPase activity. The Fe-S clusters of ABCE1 were analyzed by biophysical and biochemical methods. As presented in this study, ABCE1 harbors two essential diamagnetic [4Fe-4S]2+ clusters, one ferredoxin-like cluster formed by cysteines at position 4/5/6/7 and one unique ABCE1 cluster formed by cysteines at position 1/2/3/8. ABCE1 was found to be associated with RNA after purification from S. solfataricus and bound ribosomal RNA in vitro. In addition, ABCE1 showed homo-oligomerization and appeared to form a hexameric complex of ~440 kDa, which was RNase sensitive. Archaeal ABCE1 associated with ribosomes, however, the unique Fe-S clusters of ABCE1 were not required for this interaction. Although archaeal ABCE1 assembled with ribosomes and ribosomal RNA, ABCE1 proved not to be essential for translation in S. solfataricus and did not interact with archaeal initiation factors. Nevertheless, the ABCE1 gene is one of the few genes conserved between archaea and eukaryotes and fulfills a universal task, which needs further characterization.
Two types of proteins transport ions across the membrane – ion channels and ion pumps. Ion pumps transport ions against their electrochemical gradient by co-transporting another ion or a substrate molecule through a concentration gradient or by coupling this process to an energy source like ATP. Those that couple ATP hydrolysis to ion transport are called ion motive ATPases and can be classified as ‘V’, ‘F’ and ‘P’ types. In this thesis, two sub-classes of P-type ATPases, PIIIA and PIB were studied. Attempts were made to over-express and crystallize the plant proton pump AHA2 (a PIIIA-ATPase). Also, the two putative copper transporting ATPases, CtrA3 (CopB-like) and CtrA2 (CopA-like) from Aquifex aeolicus (both PIB pumps) were over-expressed in E. coli and characterized. PIIIA-type pumps transport protons across the membrane and are found exclusively in plants and fungi, and probably some archaea. One of the most characterized proton pump biochemically is the A. thaliana proton pump AHA2. An 8Å projection map of this enzyme is already available (Jahn 2001). PIBATPases, also called CPX type pumps transport heavy metal ions such as Cu+, Cu2+, Zn2+, Pb2+, Cd2+, Co2+ across biological membranes and play an important role in homeostasis and biotolerance of these metals. CopA and CopB are two such proteins that transport copper across cell membrane found in many prokaryotes. CopB-like proteins are found almost exclusively in bacteria, with CPH sequence motif, while CopA-like proteins have CPC sequence motif, also found in eukaryotic copper transporters including human ATP7A and ATP7B. CopB extrudes Cu2+ across the membrane. CopA is activated by and transports Cu+ but the direction of transport is debated. Attempts were made to over-express the plant proton pump AHA2 in yeast Pichia pastoris. However, the yeast expressed only a truncated protein, which could not be used for further studies. It can be concluded that P. pastoris strain SMD1163 is not a good host for expression of AHA2. Focus was then shifted to AHA2 that has been over-expressed and purified from S. cerevisiae strain RS72. Growth and purification protocols had to be changed from published methods because of laboratory constraints and this probably had an effect on the protein produced. The protein purified from S. cerevisiae could not be crystallized reproducibly for structural studies by electron microscopy. CtrA3 was expressed in E. coli and purified using Ni2+-NTA matrix. Like CopB of A. fulgidus (Mana Capelli 2003), it was active only in the presence of Cu2+ and to some extent in Ag+. The protein was maximally active at 75°C, at pH 7 and in presence of cysteine. Lipids were essential for the activity of CtrA3. However, when the protein was purified in Cymal-6, CtrA3 could not hydrolyze ATP, even when lipids were added to the reaction mixture. For reconstitution of CtrA3 into liposomes for 2D crystallization, several lipids were tested. To screen the lipids compatible for protein incorporation, CtrA3 was dialyzed with different lipids at a high lipid-to-protein ratio of 10:1 and centrifuged by sucrose density gradient. Protein incorporated in lipids localized with liposome fraction in the gradient. Most of the CtrA3 was incorporated into DPPC with no aggregation. This lipid was used for reconstitution of CtrA3 at low LPRs, and at an LPR of 0.3-0.5, the protein formed 2D crystals. A NaCl concentration of 50mM was necessary for the formation of crystals. However, salt removal by dialysis prior to harvesting was essential for obtaining wellordered lattices of CtrA3. Addition of preservatives like trehalose and tannin or direct plunging in liquid ethane for cryo-microscopy destroyed the crystal lattice. Similar to CtrA3, the gene responsible for expression of CtrA2 was amplified from genomic DNA of A. aeolicus and expressed in E. coli and purified by Ni2+-NTA. Functional characterization of CtrA2 was done by analyzing ATP hydrolysis activity of the enzyme. Similar to CopA of A. fulgidus (Mandal 2002), CtrA2 was activated in the presence of Ag+ and to some extent, Cu+. It is possible that both the copper ATPases of A. aeolicus have different ion selectivity- CtrA3, specific for Cu2+ and CtrA2, specific for Cu+. Maximal activity of CtrA2 was also at 75°C. Cysteine was essential for activity of CtrA2, but the protein was not dependent on addition of lipids for activation. Reconstitution of CtrA2 was done similar to CtrA3 for screening of lipids for 2D crystallization. Of the lipids tested, DOPC reconstituted the protein best. However, screening at low LPRs did not yield any crystals. Even though both CtrA3 and CtrA2 are similar heavy metal transporting Ptype ATPases from the same organism and have 36% identity, they behaved completely different in their expression levels in E. coli, purification profiles, activity and reconstitution in lipids.
Membrane proteins play vital role in a variety of cellular processes, such as signal transduction, transport and recognition. In turn they are involved in numerous human diseases and currently represent one of the most prevalent drug targets. A comprehensive understanding of the mechanisms mediated by membrane proteins requires information about their structures at near-atomic resolution, although structural studies of membrane proteins remain behind those of soluble proteins. A bottleneck in the study of membrane proteins resides in the difficulties that are encountered during their high-level production in cell based systems. However, many toxic effects attributed to the over production of membrane proteins are eliminated by cell-free expression, as viable host cells are no longer required. Therefore, the objective of this study was to obtain adequate amounts of selected membrane transport proteins for their structural studies using a cell-free expression system. For the establishment of the cell-free system for membrane proteins, the transporters YbgR and YiiP from Salmonella typhimurium LT2, PF0558 and PF1373 from Pyrococcus furiosus, from the cation diffusion family (CDF), BetP from Corynebacterium glutamicum from the betaine/carnitine/choline transporter (BCCT) family and Aq-2030 from Aquifex aeolicus VF5 from the monovalent cation/proton antiporter-2 (CPA2) family were selected. An Escherichia coli S-30 extract based cellfree system was established by generating the best expression constructs of the target proteins, preparing T7 RNA polymerase and an S-30 extract with high translation efficiency. The functionality of the S-30 extract was shown by the cell-free expression of correctly folded Green Fluorescent Protein (GFP). Essential factors of the cell-free system such as the Mg2+ concentration, the bacterial S-30 extract proportion in the reaction mixture and the time-course of cell-free reactions have been optimized. For the cell-free production of membrane proteins in soluble form, the possibility to supplement cell-free reactions with detergents was explored. A wide range of non-ionic or zwitterionic detergents, were found to be compatible with cell-free synthesis, while ionic detergents and non-ionic detergents at high concentrations had an inhibitory effect. Moreover, high concentrations of polyoxyethylene-alkyl-ethers (Brij) detergents were found to have enhancing effect on the production levels as well as on the solubility of cell-free produced proteins. As membrane proteins tend to misfold and aggregate in a membrane-free translation system, the possibility to supplement the cell-free reactions with inner membrane vesicles (IMVs) to obtain correctly folded target transport proteins was explored. All the target proteins were successfully produced in the batch cell-free reactions and were found to be incorporated in the IMVs. A continuous exchange cell-free (CECF) system was established, where consumable substrates (amino acids, nucleotides and energy regenerating compounds) were supplied to the cell-free reaction mixture through a dialysis membrane, which in consequence resulted in high-level production of target proteins compared to the batch system. The osmosensing and osmoregulated sodium-coupled symporter BetP from C. glutamicum was chosen for the large scale production in CECF set-up. The protein is easily produced in E. coli and is functional as assayed by its transport activity, after purification and reconstitution in liposomes. It is therefore possible to compare in-vivo and cell-free production. High-level cell-free production of BetP was achieved in CECF mode in different forms: (i) as precipitate, (ii) as soluble form in detergent, and (iii) incorporated in IMVs. Cell-free production of BetP resulted in the yield of about 0.5 mg of purified BetP from 1 ml of CECF reaction. The yield of purified BetP was increased to 1.6 fold by addition of 1% polyoxyethylene-(20)-cetyl-ether (Brij58) detergent in the reaction mixture. Moreover, the high level cell-free production of BetP (0.5 mg purified BetP/ml reaction mixture) incorporated in IMVs was shown for the first time in this work.However, it was observed that oligomerization of BetP was not efficient in the cell-free system. Factors that can promote the folding of membrane proteins such as lipids and chaperones were investigated. Addition of lipids and molecular chaperone GroE facilitated correct folding of BetP resulting in increased yield and stability of cell-free produced BetP. The results obtained indicate that most of the cell-free produced BetP exists in functional oligomeric form. The possibility of obtaining milligram amounts of BetP, a 12 trans-membrane protein from the cell-free reactions holds promise for structural and functional studies of other membrane proteins. In any case, the strategies adapted in this study should prove extremely valuable for the production of membrane proteins in the E. coli cell-free expression system.
Colorectal cancer is one of the most cause of cancer and death in Western societies. Recently, histone deacetylase inhibitors (HDIs), which regulate transcription through modification of chromatin structure, received considerable interest on the ground of they ability to stop the growth and induce cell death in colon cancer tumours, representing a promising transcriptional cancer therapy. This kind of cancer initiates with an activating mutation in the Wnt cascade, allowing the nuclear import of ß-catenin binding to LEF/TCF. This induces the overexpression of growthpromoting oncogenes affecting the cell cycle arrest, lineage-specific cell differentiation and apoptosis processes. In addition, ß-catenin also participates in cell-cell adhesion via interactions with E-cadherin, which can be repressed by families of transcription factors Snail and ZEB. This, and gain of vimentin has been closely correlated with local invasion and metastasis since they avoid the induction of apoptosis through the loss of cell anchorage, a phenomenon called anoikis. In this process the inactivation of the kinases Src an FAK provoking disruption of focal adhesion complexes through is involved. LAQ824 is a HDAC inhibitor derivative of hydroxamic acid, which present antitumor effect in colon and other cancer cells. The aim of this study is to analyse the effect of LAQ824 in cell proliferation, apoptosis, motility and tumour invasion in a colon carcinoma model based on the adenoma-carcinoma sequence descrying trough which pathways LAQ824 is able to cause these effects. Here I demonstrate for the first time that a HDAC inhibitor, LAQ824, induces detachmentinduced cell death of colon cancer cell lines HCT116 and HT-29, a phenomenon called anoikis, in a caspase-dependent and p53-independent manner. In this process the component of the Wnt signalling pathway ß-catenin is involved. Furthermore LAQ824 upregulates the adhesion molecule E-cadherin expression in these cell lines independently of its repressor Snail, but probably mediated by the repressor ZEB. In addition LAQ824-induced anoikis is caused by disruption of focal adhesion complexes through inhibition of the activity of the kinases FAK and Src inhibiting cell motility indicating a strong antimetastatic potential for LAQ824.