Refine
Year of publication
Document Type
- Article (545)
- Doctoral Thesis (87)
- Conference Proceeding (13)
- Working Paper (9)
- Preprint (6)
- Master's Thesis (3)
- Part of a Book (2)
- Bachelor Thesis (1)
- Report (1)
- Review (1)
Language
- English (668) (remove)
Has Fulltext
- yes (668) (remove)
Is part of the Bibliography
- no (668)
Keywords
- climate change (13)
- Climate change (5)
- Geochemistry (5)
- Atmospheric chemistry (4)
- Biogeochemistry (3)
- Boden (3)
- COSMO-CLM (3)
- High-pressure (3)
- Palaeoclimate (3)
- Salinity (3)
Institute
- Geowissenschaften (668) (remove)
WaterGAP (Water - Global Assessment and Prognosis) is a tool for modeling global water use and water availability. It participates among other models in the ISIMIP initiative (The Inter-Sectoral Impact Model Intercomparison Project). As part of this initiative, the water temperature should be calculated by participating hydrological models because it plays a vital role in many chemical, physical and biological processes. Therefore, the subject of this master thesis is to implement the physically based surface water temperature computation after VAN BEEK ET AL. (2012) and WANDERS ET AL. (2019) into WaterGAP and compare the results to the statistical regression approach by PUNZET ET AL. (2012). The computation is validated with observed water temperature data obtained from the GEMStat water quality database. The results are good for arctic and temperate latitudes. Surface water temperatures for tropical rivers are overestimated, most likely due to the overestimation of precipitation temperatures, incoming radiation and groundwater temperatures. The comparison with the regression model by PUNZET ET AL. (2012) shows matching results. The regression model even matches with WaterGAP results for most of the simulations of the future under climate change conditions, where the regression model should stop working due to changing environmental parameters. Several assumptions had to be made in order to implement the water temperature calculation in Water-GAP. These include, e.g., discharge temperatures for power plant cooling water, precipitation and surface runoff temperatures. For model improvements, perhaps three different values for the different regions of the world should be used to cool down the precipitation and surface runoff. The model could also be improved by refining the ice formation calculation, especially for the conditions when the ice melts, breaks up and is transported downstream. Furthermore, the feedback to the river channel roughness could be implemented if ice has formed. The WaterGAP model upgraded with the water temperature calculation will help the ISIMIP initiative in the future.
Floodplains play an important role in the terrestrial water cycle and are very important for biodiversity. Therefore, an improved representation of the dynamics of floodplain water flows and storage in global hydrological and land surface models is required. To support model validation, we combined monthly time series of satellite-derived inundation areas (Papa et al., 2010) with data on irrigated rice areas (Portmann et al., 2010). In this way, we obtained global-scale time series of naturally inundated areas (NIA), with monthly values of inundation extent during 1993–2004 and a spatial resolution of 0.5°. For most grid cells (0.5°×0.5°), the mean annual maximum of NIA agrees well with the static open water extent of the Global Lakes and Wetlands database (GLWD) (Lehner and Döll, 2004), but in 16% of the cells NIA is larger than GLWD. In some regions, like Northwestern Europe, NIA clearly overestimates inundated areas, probably because of confounding very wet soils with inundated areas. In other areas, such as South Asia, it is likely that NIA can help to enhance GLWD. NIA data will be very useful for developing and validating a floodplain modeling algorithm for the global hydrological model WGHM. For example, we found that monthly NIAs correlate with observed river discharges.
In Belize, which is well known for the Belize Barrier Reef and its offshore atolls, coastal lagoons are frequent morphological features along the coast. They represent transitional environments between siliciclastic and carbonate settings. In order to shed light into the Holocene evolution of coastal lagoon environments, five localities along the central coast of Belize were selected as coring sites. These include four coastal lagoons and one marsh area, namely Mantatee Lagoon, Mullins River Beach, Colson Point Lagoon, Commerce Bight Lagoon and Sapodilla Lagoon. A total of 26 sediment cores with core lengths ranging from 109 cm to 500 cm, were drilled using a Lanesky-vibracorer. Overall, 73 m of Holocene sediments and Pleistocene soil were recovered. Together with 58 radiocarbon dates the sediments reveal details on the sediment architecture and depositional features of the localities.
Marine inundation of the mainland and coastal lagoon formation started around 6 kyrs cal BP.
As a response to sea-level rise during the Holocene transgression, facies retrograded towards the coast, as seen in marginal marine overlying brackish mollusk faunas. Evidence for late Holocene progradation of facies due to sea-level stagnation is largely lacking. The occurrence of landward thinning sand beds, hiatuses and marine fauna in lagoonal successions are indications of event (overwash) sedimentation. Sediments recovered are largely of Holocene age (<7980 cal BP), overlying Pleistocene sections. Analyses of sediment composition and texture, radiocarbon dating and mollusk shell identification were used to describe and correlate sedimentary facies.
XRD analyses have identified quartz as the dominant mineral, with the Maya Mountains as main source of coastal lagoon sediments. The most common sedimentary facies include peat and peaty sediment, mud, sand, and poorly sorted sediments. Pleistocene soil forms the basement of Holocene sediments. Holocene mud represents lagoon background permanent sedimentation.
Peats and peat-rich sequences were deposited in mangrove swamp environments, whereas sandy facies mainly occur in the shoreface, beach, barriers, bars, barrier spits and overwash deposits. Facies successions could be identified for each locality, but it has proven difficult to correlate the stratigraphic sequences, especially among localities. These differences among the five locations studied suggest that apart from regional influence such as sea-level rise, local environmental factors such as small-scale variation in geomorphology and resulting facies heterogeneity, connectivity of the lagoon with the sea, antecedent topography and river discharge, were responsible for coastal sedimentation and lagoon development in the Holocene of Belize.
Faunal composition and distribution patterns of mollusk assemblages from 20 shell concentrations in cores collected in coastal lagoons, a mangrove-fringed tidal inlet and the marginal marine area (shallow subtidal) show considerable variation due to environmental heterogeneity and the interplay of several environmental factors in the course of the mid-late Holocene (ca. 6000 cal BP to modern). The investigated fauna ≥2 mm comprises 2246 bivalve, gastropod and 11 scaphopod specimens. Fifty-three mollusk species, belonging to 42 families, were identified. The bivalve Anomalocardia cuneimeris and cerithid gastropods are the dominant species and account for 78% of the total fauna. Diversity indices are low in concentrations from lagoons and relatively high in the marginal marine and tidal inlet areas.
Based on cluster analysis and nonmetric multidimensional scaling (NMDS), seven lagoonal assemblages and three marginal marine/tidal inlet assemblages were defined. A separation between lagoonal and marginal marine/tidal inlet assemblages seen in ordination indicates a lagoon-onshore gradient. The statistical separation among lagoonal assemblages demonstrates environmental changes during the Holocene evolution of the coastal lagoons, which is probably related to the formation of barriers and spits. The controlling factors of species distribution patterns are difficult to figure out, probably due to the heterogeneity of the barrier-lagoon systems and the interaction of paleoecological and paleoenvironmental factors. In addition to the taxonomic analysis, a taphonomic analysis of 1827 valves of A. cuneimeris from coastal lagoons was carried out. There is no relationship between depth and age of shells and their taphonomic condition. Size-frequency distributions and right-left valve ratios of A. cuneimeris suggest that valves were not transported over long distances but were deposited parautochthonously in their original habitat. Shells from tidal inlet and marginal marine environments were also predominantly deposited in their original habitats.
Since the Belize coast was repeatedly affected by hurricanes and the paleohurricane record for this region is poor, the sediment cores have been examined in order to identify storm deposits.
The paleohurricane record presented in this study spans the past 8000 years and exhibits three periods with increased evidences of hurricane strikes occurring at 6000-4900 cal yr BP, 4200-3600 cal yr BP and 2200-1500 cal yr BP. Two earlier events around 7100 and 7900 cal yr BP and more recent events around 180 cal yr BP and during modern times have been detected. Sand layers, redeposited corals and lagoon shell concentrations have been used as proxies for storm deposition. Additionally, hiatuses and reversed ages may indicate storm influence. While sand layers and corals represent overwash deposits, the lagoon shell concentrations, which mainly comprise the bivalve Anomalocardia cuneimeris and cerithid gastropods, have been deposited due to changes in lagoon salinity during and after storm landfalls. Comparison with other studies reveals similarities with one record from Belize, but hardly any matches with other published records. The potential for paleotempestology reconstructions of the barrier-lagoon complexes along the central Belize coast differs depending on geomorphology, and deposition of washovers in the lagoon basins is limited, probably due to the interplay of biological, geological and geomorphological processes.
Spatial interpolation of rain gauge data is important in forcing of hydrological simulations or evaluation of weather predictions, for example. The spatial density of available data sites is often changing with time. This paper investigates the application of statistical distance, like one minus common variance of time series, between data sites instead of geographical distance in interpolation. Here, as a typical representative of interpolation methods the inverse distance weighting interpolation is applied and the test data is daily precipitation observed in Austria. Choosing statistical distance instead of geographical distance in interpolation of an actually available coarse observation network yields more robust interpolation results at sites of a denser network with actually lacking observations. The performance enhancement is in or close to mountainous terrain. This has the potential to parsimoniously densify the currently available observation network. Additionally, the success further motivates search for conceptual rain-orography interaction models as components of spatial rain interpolation algorithms in mountainous terrain.
Spatial interpolation of rain gauge data is important in forcing of hydrological simulations or evaluation of weather predictions, for example. This paper investigates the application of statistical distance, like one minus common variance of observation time series, between data sites instead of geographical distance in interpolation. Here, as a typical representative of interpolation methods the inverse distance weighting interpolation is applied and the test data is daily precipitation observed in Austria. Choosing statistical distance instead of geographical distance in interpolation of available coarse network observations to sites of a denser network, which is not reporting for the interpolation date, yields more robust interpolation results. The most distinct performance enhancement is in or close to mountainous terrain. Therefore, application of statistical distance in the inverse distance weighting interpolation or in similar methods can parsimoniously densify the currently available observation network. Additionally, the success further motivates search for conceptual rain-orography interaction models as components of spatial rain interpolation algorithms in mountainous terrain.
Spatial interpolation of precipitation data is uncertain. How important is this uncertainty and how can it be considered in evaluation of high-resolution probabilistic precipitation forecasts? These questions are discussed by experimental evaluation of the COSMO consortium's limited-area ensemble prediction system COSMO-LEPS. The applied performance measure is the often used Brier skill score (BSS). The observational references in the evaluation are (a) analyzed rain gauge data by ordinary Kriging and (b) ensembles of interpolated rain gauge data by stochastic simulation. This permits the consideration of either a deterministic reference (the event is observed or not with 100% certainty) or a probabilistic reference that makes allowance for uncertainties in spatial averaging. The evaluation experiments show that the evaluation uncertainties are substantial even for the large area (41 300 km2) of Switzerland with a mean rain gauge distance as good as 7 km: the one- to three-day precipitation forecasts have skill decreasing with forecast lead time but the one- and two-day forecast performances differ not significantly.
So-called medicanes (Mediterranean hurricanes) are meso-scale, marine, and warm-core Mediterranean cyclones that exhibit some similarities to tropical cyclones. The strong cyclonic winds associated with medicanes threaten the highly populated coastal areas around the Mediterranean basin. To reduce the risk of casualties and overall negative impacts, it is important to improve the understanding of medicanes with the use of numerical models. In this study, we employ an atmospheric limited-area model (COSMO-CLM) coupled with a one-dimensional ocean model (1-D NEMO-MED12) to simulate medicanes. The aim of this study is to assess the robustness of the coupled model in simulating these extreme events. For this purpose, 11 historical medicane events are simulated using the atmosphere-only model, COSMO-CLM, and coupled model, with different setups (horizontal atmospheric grid-spacings of 0.44°, 0.22°, and 0.08°; with/without spectral nudging, and an ocean grid-spacing of 1/12°). The results show that at high-resolution, the coupled model is able to not only simulate most of medicane events but also improve the track length, core temperature, and wind speed of simulated medicanes compared to the atmosphere-only simulations. The results suggest that the coupled model is more proficient for systemic and detailed studies of historical medicane events, and that this model can be an effective tool for future projections.
Nucleation of aerosol particles from trace atmospheric vapours is thought to provide up to half of global cloud condensation nuclei. Aerosols can cause a net cooling of climate by scattering sunlight and by leading to smaller but more numerous cloud droplets, which makes clouds brighter and extends their lifetimes. Atmospheric aerosols derived from human activities are thought to have compensated for a large fraction of the warming caused by greenhouse gases. However, despite its importance for climate, atmospheric nucleation is poorly understood. Recently, it has been shown that sulphuric acid and ammonia cannot explain particle formation rates observed in the lower atmosphere. It is thought that amines may enhance nucleation, but until now there has been no direct evidence for amine ternary nucleation under atmospheric conditions. Here we use the CLOUD (Cosmics Leaving Outdoor Droplets) chamber at CERN and find that dimethylamine above three parts per trillion by volume can enhance particle formation rates more than 1,000-fold compared with ammonia, sufficient to account for the particle formation rates observed in the atmosphere. Molecular analysis of the clusters reveals that the faster nucleation is explained by a base-stabilization mechanism involving acid–amine pairs, which strongly decrease evaporation. The ion-induced contribution is generally small, reflecting the high stability of sulphuric acid–dimethylamine clusters and indicating that galactic cosmic rays exert only a small influence on their formation, except at low overall formation rates. Our experimental measurements are well reproduced by a dynamical model based on quantum chemical calculations of binding energies of molecular clusters, without any fitted parameters. These results show that, in regions of the atmosphere near amine sources, both amines and sulphur dioxide should be considered when assessing the impact of anthropogenic activities on particle formation.
The Late Cretaceous is known to be mostly affected by warm periods interrupted temporarily by a number of cooling events. The reconstruction of the paleoclimatic conditions during a period of high concentration of CO2 in the atmosphere is of great importance for the creation of future climate models. We applied the recently developed method reconstructing the SST from the TEX86 (TetraEther indeX of tetraethers consisting of 86 carbon atoms).
The sample material used for the present study was obtained from the tropical Late Cretaceous southern Tethys upwelling system (Negev/Israel), lasting from the Late Santonian to the Early Maastrichtian (~ 85 to 68 Ma). On the core samples from the Shefela basin, representing the outer belt of the upwelling system and the outcrop profile from the open mine Mishor Rotem (Efe Syncline), representing the inner belt, various bulk geochemical and biomarker studies were performed in this thesis.
Derived from TEX86 data, a significant long-term SST cooling trend from 36.0 to 29.3 °C is recognized during the Late Santonian and the Early Campanian in the southern Tethys margin. This is consistent with the opening and deepening of the Equatorial Atlantic Gateway (EAG) and the intrusion of cooler deep water from the southern Atlantic Ocean influencing the global SSTs and also the Tethys Ocean. Furthermore, the cooler near shore SST usually found in modern upwelling systems could be verified in case of the ancient upwelling system investigated in the present study. The calculated mean SST in the inner belt (27.7 °C) represented in the Efe Syncline was 1.5 °C cooler in comparison to the more seaward located outer belt (Shefela basin).
Moreover, geochemical and biomarker analyses were used to identify both the accumulation of high amounts of phosphate in the PM and good preservation of organic matter (OM) in the lower part of the OSM section. Total organic carbon (TOC) contents are highly variable over the whole profile reaching from 0.6 % in the MM, to 24.5 % in the OSM. Total iron (TFe) varies from 0.1 % in the PM to 3.3 % in the OSM and total sulfur (TS) varies between 0.1 % in the MM and 3.4 % in the OSM. Different correlations of TS, TOC and TFe were used to identify the conditions during the deposition of the different facies types. Natural sulfurization was found to play a key role in the preservation of the OM particularly in the lower part of the OSM. Samples from the OSM and the PM were deposited under dysoxic to anoxic conditions and iron limitation lasted during the deposition of the OSM and the PM, which effected the incorporation of sulfur into OM.
Phosphorus is highly accumulated in the sediments of the PM with a mean proportion of 11.5 % total phosphorus (TP), which is drastically reduced to a mean value of 0.9 % in the OSM and the MM. From the correlation of the bulk geochemical parameters TOC/TOCOR ratio and TP a major contribution of sulfate reducing bacteria to the phosphate deposition is concluded. This interrelation has previously been investigated in recent coastal upwelling systems off Peru, Chile, California and Namibia. This was further supported by the analysis of branched and monounsaturated fatty acids indicating the occurrence of sulfate reducing and sulfide oxidizing bacteria during the deposition.
According to the results from the analysis of n-alkanes and C27- to C29-steranes up to 95 % of the OM was of marine origin.
Organic sulfur compounds (OSC) were a major compound class in the aromatic hydrocarbon fraction and n-Alkyl and isoprenoid thiophenes were the most abundant, with highest amounts found for 2-methyl-5-tridecyl-thiophene (28 µg/g TOC). The relatively high abundance of ββ-C35 hopanoid thiophenes and epithiosteranes is equivalent to an incorporation of sulfur during the early stages of diagenesis.
Moreover, the geochemical parameters δ13Corg, δ15Norg, C/N and the pristane/phytane (Pr/Ph) ratio, were studied for reconstruction of seafloor and water column depositional environments. The high C/N ratio along with relatively low values of δ15Norg (4 ‰ to 6 ‰) and δ13Corg (-29 ‰ to -28 ‰) are consistent with a significant preferential loss of nitrogen-rich organic compounds during diagenesis. Oxygen-depleted conditions lasted during the deposition of the PM and the bottom of the OSM, reflected by the low Pr/Ph ratio of 0.11–0.7. In the upper part of the OSM and the MM the conditions changed from anoxic to dysoxic or oxic conditions. This environmental trend is consistent with co-occurring foraminiferal assemblages in the studied succession and implies that the benthic species in the Negev sequence were adapted to persistent minimum oxygen conditions by performing complete denitrification as recently found in many modern benthic foraminifera.
Furthermore, the anammox process could have influenced the nitrogen composition of the sediments. In this anaerobically process nitrite and ammonia are converted to molecular nitrogen.
This thesis aims to analyse in a first step the physical and chemical properties of soil profiles along pedomorphological transects in different land used conditions (protected, partly protected as well as cultivated and pastured areas) in North West Benin and in South East Burkina Faso. The information about soils, which are carried out in consideration of the pedogenesis processes like weathering types, saprolitisation, formation of laterite crusts and denudation within the planation surfaces are therefore correlated in a second step with the structure and dynamic of woody plant around individual soil profiles. The relationship soil properties and woody plant is investigated in order to assess the reciprocal influence between the diversity of woody plants and soil characteristics within a small scale study and under different land use conditions.
A common vertical and lateral differentiation of physical and chemical properties regardless of the partly protected, protected and cultivated status of the sites can be noticed. Thus, in the cultivated site of Kikideni and in the partly protected zone of Natiabouani (South East Burkina Faso) sandy loam and sandy clay loam soil surfaces are widespread because of the occurrence of similar erosion processes like sheet wash, rill and gully erosion while in the central part of the Pendjari National Park loamy soil textures are prevailing. In fact, the steepness of the relief and the length of the slopes in the Pendjari Park seem to limit the development of some erosion forms as gully. Furthermore, the classification of soils reflects the variation of pedological processes along the transects and thus the occurrence of different soil types. The status of the sites may play an insignificant role in the differentiation of soil properties within the scale of small pedomorphological transects. A direct comparison of the vegetation type in the land use respectively partly protected and in the total protected sites (National Park of Pendjari) reveals a transition from the shrub savanna to the tree savanna. In conclusion it is important to insist on the fact that the variations of soil parameters within small slopes and the different sites are more conditioned by varying erosion processes and drainage conditions than the status protected or land use sites while the composition and diversity of plants is influenced by the status of the sites, the prevailing management tools, the pedogenetic conditions as well as the presence of wild animals like elephants. The ordination diagram shows that the organic matter is better correlated to the subgroup representing principally the sites of the hunting zone of the Pendjari Park and might be an explaining factor to the distribution of these sample sites groups. CEC ratios in the partly protected site of Natiabouani represent the highest measured in all sites. Nevertheless, statistical analysis of the CCA (canonical correspondence analysis) indicates generally a low correlation. This tendency is consolidated by the Monte Carlo test (p=0.14) which is a good indicator of species and environmental conditions. The detailed analysis of soil properties and the vegetation dynamic as well as their relationship within small pedomorphological transects represent an important pedological and botanical data collection involving different compartments. This thesis contributes to the better understanding of the savanna landscapes of West Africa and may provide essential scientific background for each development project directed towards interdisciplinary and integrative researches.
Teleconnections of the Quasi-Biennial Oscillation in a multi-model ensemble of QBO-resolving models
(2021)
The Quasi-biennial Oscillation (QBO) dominates the interannual variability of the tropical stratosphere and influences other regions of the atmosphere. The high predictability of the QBO implies that its teleconnections could lead to increased skill of seasonal and decadal forecasts provided the relevant mechanisms are accurately represented in models. Here modelling and sampling uncertainties of QBO teleconnections are examined using a multi-model ensemble of QBO-resolving atmospheric general circulation models that have carried out a set of coordinated experiments as part of the Stratosphere-troposphere Processes And their Role in Climate (SPARC) QBO initiative (QBOi). During Northern Hemisphere winter, the stratospheric polar vortex in most of these models strengthens when the QBO near 50 hPa is westerly and weakens when it is easterly, consistent with, but weaker than, the observed response. These weak responses are likely due to model errors, such as systematically weak QBO amplitudes near 50 hPa, affecting the teleconnection. The teleconnection to the North Atlantic Oscillation is less well captured overall, but of similar strength to the observed signal in the few models that do show it. The models do not show clear evidence of a QBO teleconnection to the Northern Hemisphere Pacific-sector subtropical jet.
Towards the goal to understand the role of land-surface processes over the Indian sub-continent, a series of soil-moisture sensitivity simulations have been performed using a non-hydrostatic regional climate model COSMO-CLM. The experiments were driven by the lateral boundary conditions provided by the ERA-Interim (ECMWF) reanalysis. The simulation results show that the pre-monsoonal soil moisture has a significant influence on the monsoonal precipitation. Both, positive and negative soil-moisture precipitation (S-P) feedback processes are of importance. The negative S-P feedback process is especially influential in the western and the northern parts of India.
Abstract
The mineralogy, chemical composition, and physical properties of cratonic mantle eclogites with oceanic crustal protoliths can be modified by secondary processes involving interaction with fluids and melts, generated in various slab lithologies upon subduction (auto‐metasomatism) or mantle metasomatism after emplacement into the cratonic lithosphere. Here we combine new and published data to isolate these signatures and evaluate their effects on the chemical and physical properties of eclogite. Mantle metasomatism involving kimberlite‐like, ultramafic carbonated melts (UM carbonated melts) is ubiquitous though not pervasive, and affected between ~20% and 40% of the eclogite population at the various localities investigated here, predominantly at ~60–150 km depth, overlapping cratonic midlithospheric seismic discontinuities. Its hallmarks include lower jadeite component in clinopyroxene and grossular component in garnet, an increase in bulk‐rock MgO ± SiO2, and decrease in FeO and Al2O3 contents, and LREE‐enrichment accompanied by higher Sr, Pb, Th, U, and in part Zr and Nb, as well as lower Li, Cu ± Zn. This is mediated by addition of a high‐temperature pyroxene from a UM carbonated melt, followed by redistribution of this component into garnet and clinopyroxene. As clinopyroxene‐garnet trace‐element distribution coefficients increase with decreasing garnet grossular component, clinopyroxene is the main carrier of the metasomatic signatures. UM carbonated melt‐metasomatism at >130–150 km has destroyed the diamond inventory at some localities. These mineralogical and chemical changes contribute to low densities, with implications for eclogite gravitational stability, but negligible changes in shear‐wave velocities, and, if accompanied by H2O‐enrichment, will enhance electrical conductivities compared to unenriched eclogites.
Plain Language Summary
Oceanic crust formed at spreading ridges is recycled in subduction zones and undergoes metamorphism to eclogite. Some of this material is captured in the overlying lithospheric mantle, where it is exhumed by passing magmas. Having formed in spreading ridges, these eclogites have proven invaluable archives for the onset of plate tectonics, for the construction of cratons during subduction/collision, as probes of the convecting mantle from which their precursors formed, and as generators of heterogeneity upon recycling into Earth's convecting mantle. During subduction and until exhumation, interaction with fluids and melts (called metasomatism) can change the mineralogy, chemical composition, and physical properties of mantle eclogites, complicating their interpretation, but a comprehensive study of these effects is lacking so far. We investigated mantle eclogites from ancient continents (cratons) around the globe in order to define hallmarks of metasomatism by subduction‐related fluids and small‐volume ultramafic carbonated mantle melts. We find that the latter is pervasive and occurs predominantly at midlithospheric depths where seismic discontinuities are detected, typically causing diamond destruction and a reduction in density. This has consequences for their gravitational stability and for the interpretation of shearwave velocities in cratons.
Chemical reduction-oxidation mechanisms within mantle rocks link to the terrestrial carbon cycle by influencing the depth at which magmas can form, their composition, and ultimately the chemistry of gases released into the atmosphere. The oxidation state of the uppermost mantle has been widely accepted to be unchanged over the past 3800 m.y., based on the abundance of redox-sensitive elements in greenstone belt–associated samples of different ages. However, the redox signal in those rocks may have been obscured by their complex origins and emplacement on continental margins. In contrast, the source and processes occurring during decompression melting at spreading ridges are relatively well constrained. We retrieve primary redox conditions from metamorphosed mid-oceanic ridge basalts (MORBs) and picrites of various ages (ca. 3000–550 Ma), using V/Sc as a broad redox proxy. Average V/Sc values for Proterozoic suites (7.0 ± 1.4, 2σ, n = 6) are similar to those of modern MORB (6.8 ± 1.6), whereas Archean suites have lower V/Sc (5.2 ± 0.4, n = 5). The lower Archean V/Sc is interpreted to reflect both deeper melt extraction from the uppermost mantle, which becomes more reduced with depth, and an intrinsically lower redox state. The pressure-corrected oxygen fugacity (expressed relative to the fayalite-magnetite-quartz buffer, ΔFMQ, at 1 GPa) of Archean sample suites (ΔFMQ –1.19 ± 0.33, 2σ) is significantly lower than that of post-Archean sample suites, including MORB (ΔFMQ –0.26 ± 0.44). Our results imply that the reducing Archean atmosphere was in equilibrium with Earth’s mantle, and further suggest that magmatic gases crossed the threshold that allowed a build-up in atmospheric O2 levels ca. 3000 Ma, accompanied by the first “whiffs” of oxygen in sediments of that age.
The Alborz Mountains are forming a ~100 km wide, E-W trending mountain chain where individual summits are up to 5000 m in elevation. The Alborz Mountains range are part of the Alpine orogen and are straddling a 2000 km wide area S of the Caspian Sea. The rocks of the Alborz Mountains consist of Neogen sediments, which are affected by folding and faulting. In the western part of the Alborz Mountains the folds and faults are trending NW-SE, whereas in the eastern part they are trending NE-SW. GPS data confirm N-S shortening including dextral strike-slip along ESE-WNW trending faults, and sinistral strike-slip along ENE-WSW trending faults. The present thesis is focusing on the active Garmsar salt nappe, the fragmented roof of which is pierced by rock salt which extruded near the front of the Alborz Mountains Range. During the past 5 m.y. the front of the Alborz chain migrated towards SSW on top of the salt of the Garmsar basin. The salt was squeezed towards SSW and took place at the Great Kavir. The extruded salt is forming the Eyvanekey plateau between the cities of Eyvanekey and Garmsar. Both the Garmsar salt nappe and the Eyvanekey plateau are dextrally displaced for ca. 9 km along the Zirab-Garmsar fault. Structural analyses of the Garmsar salt nappe indicate three different groups of joints which are trending perpendicular and parallel to the local mechanical anisotropy. The folds of the study area are congruent (type 2 and 3 after Ramsay) resulting from viscose inhomogeneous flow. InSAR-Investigations suggest the Alborz Mountains to be lifted up by ca. 1 cm/a, while horizontal shortening is active at a rate of 8 ±2 mm/a. These values are consistent with GPS data. Based on nine „Advanced Synthetic Aperture Radar“ (ASAR) scenarios, produced by the ENVISAT satellite of the European space agency between 2003 and 2006, we used interferograms to map the displacement via 22 increments during 2 – 18 months. The results suggest that the topographic height of the surface of the salt is changing at a rate which is controlled by the season. The displacement ranges from subsidence at -40 to -50 mm/a to uplift of 20 mm/a. In order to investigate the time-dependent deformation with high spatial resolution, we used algorithms which are based on data of small base lines (SBAS). The resulting interferometric SAR time series analyses also suggest that the study area is largely subsiding at a rate that is controlled by the seasons. The map with the averaged LOS deformation velocities, on the other hand, suggests the subsidence to increase from the upper part of the salt nappe towards deeper topographic 5 levels of the agricultural lowlands. The major part of subsidence is probably caused by the annual rainfall which results in subrosion of salt. The spatial changes in the subsidence rate are probably controlled by the distribution of fountains, mining activity at the margin of the salt glacier, and faults and fractures inside the salt. Striking seasonal imprints are obvious along the agricultural areas which are surrounding the Garmsar salt nappe. These areas are rapidly subsiding in summer and spring when groundwater is used for irrigations. The maximum rate of subsidence (40-50 mm/a) is located E and W of the Eyvanekey plateau, where large areas are irrigated. The maximum displacement is 20 mm/a in the farmland and 5 mm/a in the center of the salt nappe. Depth estimates using Euler deconvolution method for gravimetric and magnetic data suggest the salt to extrude from a depth less than ca. 2000 m. The gravity field of the study area is characterized by strong anomalies in the SW and weak anomalies in the NE. A considerable negative anomaly in the N indicates that the northern part subsided, whereas the southern part was lifted up. The seismic data show three major horizons inside the Miocene sediments: the Lower Red Formation, the Qom Formation, and the Upper Red Formation. The western part of the study area seems to be free from salt domes. The layers of the upper part of the Qom Formation show thinning along the NE and NW trending faults. In some areas the seismic reflectors indicate steep faults close the saddle of the folds. NE-SW-, NW-SE and E-Wtrending faults prevail. Analogue experiments have been carried out to extend our knowledge about the evolution of the Garmsar salt dome. We used a scaled model (34 cm * 25 cm * 2.5 cm) that was shortened perpendicular to its long side. The wedge shape of the Alborz Mountains was simulated by a wedge consisting of Styrofoam. Rock salt was simulated using Polydimethylsiloxan (PDMS), a linear viscous material with a viscosity of 2.3*104 Pa s and a density of 0.96 g/cm3 at room temperature. Other sediments were modeled using dry quartz sand. The experimental results can be used to simulate the structural evolution of the study area: The Alborz deformation front was emplaced on top of the salt rocks in the Garmsar area while migrating towards SSW. A salt basin and a salt extrusion have also been produced in the model. Cross sections through the wedge shaped analogue model indicate N- and S-dipping reverse faults, which are in line with the wedge shape of the Alborz chain. Moreover, ENE-WSW trending sinistral and ESE-WNW trending dextral strike-slip faults led to N-S shortening during the Miocene. Structural marker horizons, 6 which have been turned into Z-folds on the western fold limbs and to S-folds on the eastern fold limbs, are comparable with the folds of the study area. Solving the problem of waste is one of the central tasks of environmental protection. It is becoming increasingly difficult to find suitable sites that are acceptable to the public. Salt and salt formations have relevant properties to be utilizing as a repository for each kind of waste. The favorable properties make rock salt highly suitable as a host rock, in particular for nonradioactive and radioactive wastes. The Qom and Garmsar basins are the nearest salt diapirs to the Tehran province, and there are suitable repositories for waste disposal. Based on surface and subsurface data, the Garmsar salt diapir has been investigated as a case example for its suitability as a host and repository for various types of waste. The data used are based on field studies, interferometry, and geophysical investigations. The results of this study suggest the deep bedded salt of the Garmsar Salt Basin to be an appropriate host for the deposition of industrial waste. Rock salt of surficial layers or domes, on the other hand, is not regarded as an appropriate candidate for waste disposal.
Brachiopod shells are the most widely used geological archive for the reconstruction of the temperature and the oxygen isotope composition of Phanerozoic seawater. However, it is not conclusive whether brachiopods precipitate their shells in thermodynamic equilibrium. In this study, we investigated the potential impact of kinetic controls on the isotope composition of modern brachiopods by measuring the oxygen and clumped isotope compositions of their shells. Our results show that clumped and oxygen isotope compositions depart from thermodynamic equilibrium due to growth rate-induced kinetic effects. These departures are in line with incomplete hydration and hydroxylation of dissolved CO2. These findings imply that the determination of taxon-specific growth rates alongside clumped and bulk oxygen isotope analyses is essential to ensure accurate estimates of past ocean temperatures and seawater oxygen isotope compositions from brachiopods.
Tetra-auricupride, ideally AuCu, represents the only species showing the coexistence of Au with an elevated level of Pt, as in the case of a detrital grain studied structurally for the first time, from an ophiolite-associated placer at Bolshoy Khailyk, western Sayans, Russia. We infer that tetra-auricupride can incorporate as much as ~30 mol. % of a “PtCu” component, apparently without significant modification of the unit cell. The unit-cell parameters of platiniferous tetra-auricupride are: a 2.790(1) Å, c 3.641(4) Å, with c/a = 1.305, which are close to those reported for ordered AuCu(I) in the system Au–Cu, and close also to the cell parameters of tetraferroplatinum (PtFe), which both appear to crystallize in the same space group, P4/mmm. These intermetallic compounds and natural alloys are thus isostructural. The closeness of their structures presumably allows Pt to replace Au atoms so readily. The high extent of Cu + Au enrichment is considered to be a reflection of geochemical evolution and buildup in levels of the incompatible Cu and Au with subordinate Pt in a remaining volume of melt at low levels of fO2 and fS2 in the system.
The oceans at the time of the Cenomanian–Turonian transition were abruptly perturbed by a period of bottom-water anoxia. This led to the brief but widespread deposition of black organic-rich shales, such as the Livello Bonarelli in the Umbria–Marche Basin (Italy). Despite intensive studies, the origin and exact timing of this event are still debated. In this study, we assess leading hypotheses about the inception of oceanic anoxia in the Late Cretaceous greenhouse world by providing a 6 Myr long astronomically tuned timescale across the Cenomanian–Turonian boundary. We procure insights into the relationship between orbital forcing and the Late Cretaceous carbon cycle by deciphering the imprint of astronomical cycles on lithologic, physical properties, and stable isotope records, obtained from the Bottaccione, Contessa and Furlo sections in the Umbria–Marche Basin. The deposition of black shales and cherts, as well as the onset of oceanic anoxia, is related to maxima in the 405 kyr cycle of eccentricity-modulated precession. Correlation to radioisotopic ages from the Western Interior (USA) provides unprecedented age control for the studied Italian successions. The most likely tuned age for the base of the Livello Bonarelli is 94.17 ± 0.15 Ma (tuning 1); however, a 405 kyr older age cannot be excluded (tuning 2) due to uncertainties in stratigraphic correlation, radioisotopic dating, and orbital configuration. Our cyclostratigraphic framework suggests that the exact timing of major carbon cycle perturbations during the Cretaceous may be linked to increased variability in seasonality (i.e. a 405 kyr eccentricity maximum) after the prolonged avoidance of seasonal extremes (i.e. a 2.4 Myr eccentricity minimum). Volcanism is probably the ultimate driver of oceanic anoxia, but orbital periodicities determine the exact timing of carbon cycle perturbations in the Late Cretaceous. This unites two leading hypotheses about the inception of oceanic anoxia in the Late Cretaceous greenhouse world.
The organic rich Livello Bonarelli formed as a result of oxygen deficiency and carbonate dissolution in the oceans during the Cenomanian/Turonian (C/T) transition. During this Ocean Anoxic Event 2 (OAE2), a combination of factors caused increased productivity, incomplete decomposition of organic matter and widespread deposition of black shales. Although these sediments are extensively studied, the exact extent, cause, timing and duration of oceanic anoxia are debated (Sinton and Duncan, 1997; Mitchell et al., 2008). Contrasting causal mechanisms have been suggested, including stratification of the water column (Lanci et al., 2010) versus intensification of the hydrological cycle driving a dynamic ocean circulation (Trabucho-Alexandre et al., 2010). Studies on trace-elemental and (radiogenic) isotope compositions of Cenomanian marine successions have suggested a volcanic origin of OAE2, by delivering nutrients to the semi-enclosed proto-North Atlantic (Zheng et al., 2013, and references therein; Du Vivier et al., 2014). Deciphering the importance of volcanic and oceanographic processes requires tight constraints on their relative timing. Regularly occurring black cherts and shales below the Livello Bonarelli demonstrate that oceanic conditions in the Umbria-Marche Basin were punctuated by episodes of regional anoxia from the mid-Cenomanian onwards. Their hierarchical stacking pattern suggests an orbital control on the deposition of organic rich horizons (Mitchell et al., 2008; Lanci et al., 2010). Stable carbon isotope data reveal that long-term 15 variations in eccentricity paced the carbon cycle (Sprovieri et al., 2013) and sea level changes (Voigt et al., 2006) of the Late Cretaceous. Here we investigate the role of orbital forcing on climate and the carbon cycle, and, specifically, on organic-rich sedimentation prior, during, and after OAE2.
We also explore the potential for establishing an anchored astrochronology for the C/T interval in Europe. Recent improvements in the astronomical solution (La2011; Laskar et al., 2011b) and in the intercalibration of radiometric and astronomical dating techniques (Kuiper et al., 2008; Renne et al., 2013) allow the extension of the astronomical time scale into the Cretaceous. The C/T boundary in the Western Interior (USA) has been dated at 93.90 ± 0.15 Ma by intercalibration of radio-isotopic and astrochronologic time scales (Meyers et al., 2012b). Also, reinterpretation of proxy records spanning the C/T interval seems to resolve discrepancies in reported durations of the OAE2 (Sageman et al., 2006; Meyers et al., 2012a). The well-documented Italian rhythmic successions, reference sections for climatic processes in the Tethyan realm, need to be tied in with the absolute time scale. Biostratigraphic correlation to radioisotopically-dated ash beds in the Western Interior is complicated by the provinciality of faunas and floras. However, δ13C stratigraphy provides a reliable correlation tool (Gale et al., 2005) and we present a new 40Ar/39Ar age for the Thatcher bentonite from the Western Interior occurring within the mid-Cenomanian δ13C event (MCE). This study integrates the well-developed cyclostratigraphy from the Umbria-Marche Basin with radioisotopic ages from the Western Interior and derives a numerical timescale for this critical interval in Earth’s history.
During the Late Cretaceous and early Cenozoic the Earth experienced prolonged climatic cooling most likely caused by decreasing volcanic activity and atmospheric CO2 levels. However, the causes and mechanisms of subsequent major global warming culminating in the late Paleocene to Eocene greenhouse climate remain enigmatic. We present deep and intermediate water Nd-isotope records from the North and South Atlantic to decipher the control of the opening Atlantic Ocean on ocean circulation and its linkages to the evolution of global climate. The marked convergence of Nd-isotope signatures 59 million years ago indicates a major intensification of deep-water exchange between the North and South Atlantic, which coincided with the turning point of deep-water temperatures towards early Paleogene warming. We propose that this intensification of Atlantic overturning circulation in concert with increased atmospheric CO2 from continental rifting marked a climatic tipping point contributing to a more efficient distribution of heat over the planet.
During the 1980s and early 1990s, the importance of small firm growth and industrial districts in Italy became the focus of a large number of regional development studies. According to this literature, successful industrial districts are characterized by intensive cooperation and market producer-user interaction between small and medium-sized, flexibly specialized firms (Piore and Sabel, 1984; Scott, 1988). In addition, specialized local labor markets develop which are complemented by a variety of supportive institutions and a tradition of collaboration based on trust relations (Amin and Robins, 1990; Amin and Thrift, 1995). It has also been emphasized that industrial districts are deeply embedded into the socio-institutional structures within their particular regions (Grabher, 1993). Many case studies have attempted to find evidence that the regional patterns identified in Italy are a reflection of a general trend in industrial development rather than just being historical exceptions. Silicon Valley, which is focused on high technology production, has been identified as being one such production complex similar to those in Italy (see, for instance, Hayter, 1997). However, some remarkable differences do exist in the institutional context of this region, as well as its particular social division of labor (Markusen, 1996). Even though critics, such as Amin and Robins (1990), emphasized quite early that the Italian experience could not easily be applied to other socio-cultural settings, many studies have classified other high technology regions in the U.S. as being industrial districts, such as Boston s Route 128 area. Too much attention has been paid to the performance of small and medium-sized firms and the regional level of industrial production in the ill-fated debate regarding industrial districts (Martinelli and Schoenberger, 1991). Harrison (1997) has provided substantial evidence that large firms continue to dominate the global economy. This does not, however, imply that a de-territorialization of economic growth is necessarily taking place as globalization tendencies continue (Storper, 1997; Maskell and Malmberg, 1998). In the case of Boston, it has been misleading to define its regional economy as being an industrial district. Neither have small and medium-sized firms been decisive in the development of the Route 128 area nor has the region developed a tradition of close communication between vertically-disintegrated firms (Dorfman, 1983; Bathelt, 1991a). Saxenian (1994) found that Boston s economy contrasted sharply with that of an industrial district. Specifically, the region has been dominated by large, vertically-integrated high technology firms which are reliant on proprietary technologies and autarkic firm structures. Several studies have tried to compare the development of the Route 128 region to Silicon Valley. These studies have shown that both regions developed into major 2 agglomerations of high technology industries in the post-World War II period. Due to their different traditions, structures and practices, Silicon Valley and Route 128 have followed divergent development paths which have resulted in a different regional specialization (Dorfman, 1983; Saxenian, 1985; Kenney and von Burg, 1999). In the mid 1970s, both regions were almost equally important in terms of the size of their high technology sectors. Since then, however, Silicon Valley has become more important and has now the largest agglomeration of leading-edge technologies in the U.S. (Saxenian, 1994). Saxenian (1994) argues that the superior performance of high technology industries in Silicon Valley over those in Boston is based on different organizational patterns and manufacturing cultures which are embedded in those socio-institutional traditions which are particular to each region. Despite the fact that Saxenian (1994) has been criticized for basing her conclusions on weak empirical research (i.e. Harrison, 1997; Markusen, 1998), she offers a convincing explanation as to why the development paths of both regions have differed.1 Saxenian s (1994) study does not, however, identify which structures and processes have enabled both regions to overcome economic crises. In the case of the Boston economy, high technology industries have proven that they are capable of readjusting and rejuvenating their product and process structures in such a way that further innovation and growth is stimulated. This is also exemplified by the region s recent economic development. In the late 1980s, Boston experienced an economic decline when the minicomputer industry lost its competitive basis and defense expenditures were drastically reduced. The number of high technology manufacturing jobs decreased by more than 45,000 between 1987 and 1995. By the mid 1990s, however, the regional economy began to recover. The rapidly growing software sector compensated for some of the losses experienced in manufacturing. In this paper, I aim to identify the forces behind this economic recovery. I will investigate whether high technology firms have uncovered new ways to overcome the crisis and the extent to which they have given up their focus on self-reliance and autarkic structures. The empirical findings will also be discussed in the context of the recent debate about the importance of regional competence and collective learning (Storper, 1997; Maskell and Malmberg, 1998). There is a growing body of literature which suggests that some regional economies During the 1980s and early 1990s, the importance of small firm growth and industrial districts in Italy became the focus of a large number of regional development studies. According to this literature, successful industrial districts are characterized by intensive cooperation and market producer-user interaction between small and medium-sized, flexibly specialized firms (Piore and Sabel, 1984; Scott, 1988). In addition, specialized local labor markets develop which are complemented by a variety of supportive institutions and a tradition of collaboration based on trust relations (Amin and Robins, 1990; Amin and Thrift, 1995). It has also been emphasized that industrial districts are deeply embedded into the socio-institutional structures within their particular regions (Grabher, 1993). Many case studies have attempted to find evidence that the regional patterns identified in Italy are a reflection of a general trend in industrial development rather than just being historical exceptions. Silicon Valley, which is focused on high technology production, has been identified as being one such production complex similar to those in Italy (see, for instance, Hayter, 1997). However, some remarkable differences do exist in the institutional context of this region, as well as its particular social division of labor (Markusen, 1996). Even though critics, such as Amin and Robins (1990), emphasized quite early that the Italian experience could not easily be applied to other socio-cultural settings, many studies have classified other high technology regions in the U.S. as being industrial districts, such as Boston s Route 128 area. Too much attention has been paid to the performance of small and medium-sized firms and the regional level of industrial production in the ill-fated debate regarding industrial districts (Martinelli and Schoenberger, 1991). Harrison (1997) has provided substantial evidence that large firms continue to dominate the global economy. This does not, however, imply that a de-territorialization of economic growth is necessarily taking place as globalization tendencies continue (Storper, 1997; Maskell and Malmberg, 1998). In the case of Boston, it has been misleading to define its regional economy as being an industrial district. Neither have small and medium-sized firms been decisive in the development of the Route 128 area nor has the region developed a tradition of close communication between vertically-disintegrated firms (Dorfman, 1983; Bathelt, 1991a). Saxenian (1994) found that Boston s economy contrasted sharply with that of an industrial district. Specifically, the region has been dominated by large, vertically-integrated high technology firms which are reliant on proprietary technologies and autarkic firm structures. Several studies have tried to compare the development of the Route 128 region to Silicon Valley. These studies have shown that both regions developed into major 2 agglomerations of high technology industries in the post-World War II period. Due to their different traditions, structures and practices, Silicon Valley and Route 128 have followed divergent development paths which have resulted in a different regional specialization (Dorfman, 1983; Saxenian, 1985; Kenney and von Burg, 1999). In the mid 1970s, both regions were almost equally important in terms of the size of their high technology sectors. Since then, however, Silicon Valley has become more important and has now the largest agglomeration of leading-edge technologies in the U.S. (Saxenian, 1994). Saxenian (1994) argues that the superior performance of high technology industries in Silicon Valley over those in Boston is based on different organizational patterns and manufacturing cultures which are embedded in those socio-institutional traditions which are particular to each region. Despite the fact that Saxenian (1994) has been criticized for basing her conclusions on weak empirical research (i.e. Harrison, 1997; Markusen, 1998), she offers a convincing explanation as to why the development paths of both regions have differed.1 Saxenian s (1994) study does not, however, identify which structures and processes have enabled both regions to overcome economic crises. In the case of the Boston economy, high technology industries have proven that they are capable of readjusting and rejuvenating their product and process structures in such a way that further innovation and growth is stimulated. This is also exemplified by the region s recent economic development. In the late 1980s, Boston experienced an economic decline when the minicomputer industry lost its competitive basis and defense expenditures were drastically reduced. The number of high technology manufacturing jobs decreased by more than 45,000 between 1987 and 1995. By the mid 1990s, however, the regional economy began to recover. The rapidly growing software sector compensated for some of the losses experienced in manufacturing. In this paper, I aim to identify the forces behind this economic recovery. I will investigate whether high technology firms have uncovered new ways to overcome the crisis and the extent to which they have given up their focus on self-reliance and autarkic structures. The empirical findings will also be discussed in the context of the recent debate about the importance of regional competence and collective learning (Storper, 1997; Maskell and Malmberg, 1998). There is a growing body of literature which suggests that some regional economies an develop into learning economies which are based on intra-regional production linkages, interactive technological learning processes, flexibility and proximity (Storper, 1992; Lundvall and Johnson, 1994; Gregersen and Johnson, 1997). In the next section of this paper, I will discuss some of the theoretical issues regarding localized learning processes, learning economies and learning regions (see, also, Bathelt, 1999). I will then describe the methodology used. What follows is a brief overview of how Boston s economy has specialized in high technology production. The main part of the paper will then focus on recent trends in Boston s high technology industries. It will be shown that the high technology economy consists of different subsectors which are not tied to a single technological development path. The various subsectors are, at least partially, dependent on different forces and unrelated processes. There is, however, tentative evidence which suggests that cooperative behavior and collective learning in supplierproducer- user relations have become important factors in securing reproductivity in the regional structure. The importance of these trends will be discussed in the conclusions.
This research was conducted in the Rwenzori Region of the Western Branch, East African Rift System (EARS). The EARS is a tectonic structure extending over a length of more than 3000 km from the Afar Triple Junction, in Ethiopia, to Lake Malawi in the south. The Western Rift System is a roughly NE to ENE trending sector of the EARS, which runs along the western boundary of Uganda and the neighboring Democratic Republic of Congo (D.R.C). It stretches 2100 km from Nimule, NW on Uganda-Sudan border, extending to Lake Malawi in the SE of Africa. The unusual uplift of the Rwenzori Mountains within an extensional regime and the mechanisms associated with the high frequency of seismic activity in the region was hardly understood and therefore, had remained a subject of contention that needed to be critically addressed in detail. To my knowledge, this was probably the first study to be performed and documented in great depth within the domains of seismic noise variation, seismic anisotropy and b value analyses beneath the Rwenzori Region. After about six years of operation (2006-2012), the seismology group of the RIFTLINK Research Project (www.riftlink.org) acquired a vast amount of high-quality, digital data that were collected using a seismic network of well calibrated seismic equipment. The project was divided into two phases. Phase I, that operated between February 2006 - September 2007, consisted of thirty-two temporary seismic stations, which were selectively spread out in the Rwenzori Region on the Ugandan side, to detect and record extremely weak as well as strong naturally occurring earthquakes. The seismic equipment used included EDL and REFTEK digitizers, which were coupled with Güralp and MARK sensors respectively (REFTEKS: only short-period MARK sensors, EDLs: short-period MARK plus few broadband Güralp Sensors). Exactly 22375 earthquakes were recorded. The data were processed using the SEISAN software package. About 14413 earthquakes were carefully localized using the velocity model of Bram (1975) that implements a Vp=Vs ratio fixed at 1.74. Phase II, that extended between 2009-2012 consisted of thirty-two seismic stations, which were spread out around the Rwenzori Mountains, both on the Ugandan side and the neighboring D.R.C. Only Taurus digitizers that were coupled with Trillium sensors were used in the D.R.C. On the Ugandan side however, both EDL and Taurus digitizers, which were coupled with Trillium and Güralp sensors were used. ...
This article reviews the most recent results concerning second harmonic generation (SHG) experiments of non-phase matchable and phase matchable powder samples at high pressures and explains the pressure dependence of the intensity of the SHG signal by correlating it to the ratio between the average coherence length and the average particle size. The examples discussed here include pressure-induced structural changes in quartz, ZnO, ice VII and KIO3. It is shown that the second harmonic generation technique is a unique tool for the detection of pressure-induced structural phase transitions. It is laboratory based and allows fast measurements. It is complementary to X-ray diffraction and provides additional information about the presence of an inversion center for unknown or controversially discussed structures at high pressure.
The ICON single-column mode
(2021)
The single-column mode (SCM) of the ICON (ICOsahedral Nonhydrostatic) modeling framework is presented. The primary purpose of the ICON SCM is to use it as a tool for research, model evaluation and development. Thanks to the simplified geometry of the ICON SCM, various aspects of the ICON model, in particular the model physics, can be studied in a well-controlled environment. Additionally, the ICON SCM has a reduced computational cost and a low data storage demand. The ICON SCM can be utilized for idealized cases—several well-established cases are already included—or for semi-realistic cases based on analyses or model forecasts. As the case setup is defined by a single NetCDF file, new cases can be prepared easily by the modification of this file. We demonstrate the usage of the ICON SCM for different idealized cases such as shallow convection, stratocumulus clouds, and radiative transfer. Additionally, the ICON SCM is tested for a semi-realistic case together with an equivalent three-dimensional setup and the large eddy simulation mode of ICON. Such consistent comparisons across the hierarchy of ICON configurations are very helpful for model development. The ICON SCM will be implemented into the operational ICON model and will serve as an additional tool for advancing the development of the ICON model.
The most frequently used boundary-layer turbulence parameterization in numerical weather prediction (NWP) models are turbulence kinetic energy (TKE) based-based schemes. However, these parameterizations suffer from a potential weakness, namely the strong dependence on an ad-hoc quantity, the so-called turbulence length scale. The physical interpretation of the turbulence length scale is difficult and hence it cannot be directly related to measurements or large eddy simulation (LES) data. Consequently, formulations for the turbulence length scale in basically all TKE schemes are based on simplified assumptions and are model-dependent. A good reference for the independent evaluation of the turbulence length scale expression for NWP modeling is missing. Here we propose a new turbulence length scale diagnostic which can be used in the gray zone of turbulence without modifying the underlying TKE turbulence scheme. The new diagnostic is based on the TKE budget: The core idea is to encapsulate the sum of the molecular dissipation and the cross-scale TKE transfer into an effective dissipation, and associate it with the new turbulence length scale. This effective dissipation can then be calculated as a residuum in the TKE budget equation (for horizontal sub-domains of different sizes) using LES data. Estimation of the scale dependence of the diagnosed turbulence length scale using this novel method is presented for several idealized cases.
Fossil records of early solar irradiation and cosmolocation of the CAI factory: a reappraisal
(2021)
Calcium-aluminum–rich inclusions (CAIs) in meteorites carry crucial information about the environmental conditions of the nascent Solar System prior to planet formation. Based on models of 50V–10Be co-production by in-situ irradiation, CAIs are considered to have formed within ~0.1 AU from the proto-Sun. Here, we present vanadium (V) and strontium (Sr) isotopic co-variations in fine- and coarse-grained CAIs and demonstrate that kinetic isotope effects during partial condensation and evaporation best explain V isotope anomalies previously attributed to solar particle irradiation. We also report initial excesses of 10Be and argue that CV CAIs possess essentially a homogeneous level of 10Be, inherited during their formation. Based on numerical modeling of 50V–10Be co-production by irradiation, we show that CAI formation during protoplanetary disk build-up likely occurred at greater heliocentric distances than previously considered, up to planet-forming regions (~1AU), where solar particle fluxes were sufficiently low to avoid substantial in-situ irradiation of CAIs.
Subduction zone magmas are more oxidised on eruption than those at mid-ocean ridges. This is attributed either to oxidising components, derived from subducted lithosphere (slab) and added to the mantle wedge, or to oxidation processes occurring during magma ascent via differentiation. Here we provide direct evidence for contributions of oxidising slab agents to melts trapped in the sub-arc mantle. Measurements of sulfur (S) valence state in sub-arc mantle peridotites identify sulfate, both as crystalline anhydrite (CaSO4) and dissolved SO42− in spinel-hosted glass (formerly melt) inclusions. Copper-rich sulfide precipitates in the inclusions and increased Fe3+/∑Fe in spinel record a S6+–Fe2+ redox coupling during melt percolation through the sub-arc mantle. Sulfate-rich glass inclusions exhibit high U/Th, Pb/Ce, Sr/Nd and δ34S (+ 7 to + 11‰), indicating the involvement of dehydration products of serpentinised slab rocks in their parental melt sources. These observations provide a link between liberated slab components and oxidised arc magmas.
The focus of this study were Celtic gold coins excavated from the Martberg, a Celtic oppidium and sanctuary, occupied in the first century B.C. by a Celtic tribe known as the Treveri. These coins and a number of associated coinages, were characterised in terms of their alloy compositions and their geochemical and isotopic signatures so as to answer archaeological and numismatic questions of coinage development and metal sources. This required the development of analytical methods involving; Electron Microprobe (EPMA), Laser Ablation-ICP-MS, solution Multicollector-ICPMS and LA-MC-ICP-MS. The alloy compositions (Au-Ag-Cu-Sn) were determined by EPMA on a small polished area on the edge of the coins. A large beam size, 50µm (diameter), was used to overcome the extreme heterogeneity of these alloys. These analyses were shown to be representative of the bulk composition of the coins. The metallurgical development of the coinages was defined and showed that the earlier coinages followed a debasement trend, which was superceded by a trend of increasing copper at the expense of sliver while gold compositions remained stable. This change occurred with the appearance of the inscribed "POTTINA" coinage, Scheers 30/V. Two typologically different coinages, Scheers 16 and 18 ("Armorican Types") were found to have markedly different compositions which do not fit into the trends described above. A Flan for a gold coin, which may indicate the presence of a mint at the Martberg, was found to have an identicle weight and composition as the Scheers 30/I coins, which preceeded the majority of the coins found at the Martberg in the coin development chronology. The trace element anaylses were made by Laser Ablation-ICPMS using an AridusTM desolvating nebuliser to introduce matrix matched solution standards to calibrate the measurements, which were then normalised to 100%. Quantitative results were obtained for the following elements: Sc, Ti, Cr, Mn, Co, Ni, Cu, Zn, Se, Ru, Rh, Pd, Ag, Sb, Te, W, Ir, Pt, Pb, Bi. The remaining elements remain problematic as they produced incorrect standardisations mainly due to chemical effects in solution such as adsorption onto the beaker walls or oxidation : V, Fe, Ga, Ge, As, Mo, Sn, Re, Os, Hg. Changes in the sources of Au, Ag and Cu were observed during the development of the coinages through the variation of trace elements, which correlate positively with the major components of the coin alloys. Changes in the Pt/Au ratios show that the Scheers 23 coins contain distinctly different gold from the later coinages and that the Scheers 18 gold source was also different. Te/Ag was used to show that the Sch.23 coins also contained different silver and some subgroups were observed in the Sch. 30/V coins. A major change in copper source is indicated by the sudden increase of Sb and Ni with the introduction of the Sch. 30/V coins (POTTINA), which can be linked to a similar change in copper observed in the contemporary silver coinage, Sch. 55 (with a ring). Lead isotopic analyses were made by solution- and Laser Ablation - MC-ICP-MS, The laser technique proved to be in good agreement with the solution analyses with precisions between 1 and 0.1%o (per mil). The development of the laser method opens the way for easy and virtually non-destructive Pb isotopic determinations of ancient gold coins. The results showed that Sch. 23 is very different from the following coinages, Sch. 16 and 18 are also different, forming their own group, and all the later "Eye" staters (Sch. 30/I-VI) lie on a mixing line controlled by the addition of copper from a Mediterranean source, probably Sardinia or Spain. An indication of gold and silver sources should be possible with further analyses of the Sch. 23 and Rainbow Cup gold coins and the Sch. 54 and 55 silver coinages. Copper Isotopic analyses were made by solution- and Laser Ablation - MC-ICP-MS. Both techniques require further development to produce more reproducible results. The results show that there appears to be a trend to more positive d Cu65 values for the later coinages and that the link between the copper used in the Sch. 30/V (POTTINA) coins and the silver Sch. 55 (with a ring) coins is also shown by similarly postive d Cu65 values. The full suite of analyses were also made on samples of gold from the region. They were mostly composed of "placer gold", alluvial gold found in rivers. It was found that when a study is restricted to a limited number of deposits or areas then it is possible to distinguish between deposits based on the concentration of those elements which are least affected by transport related alteration processes. These elements include; the PGE's, due to their refractory nature, and those elements which are usually present in high enough concentrations to remain relatively unaffected, eg: Cu, Pb and Sb. Due to the nature of the coin alloy it is not possible to link the gold used in the coins studied here with gold deposits, as the large amounts of Ag and Cu, added to the coin alloys, have masked the Au signature. However, further Pb isotopic analyses of gold deposits should prove useful in determining from which regions Celtic gold was derived.
A complete, well-preserved record of the Cenomanian/Turonian (C/T) Oceanic Anoxic Event 2 (OAE-2) was recovered from Demerara Rise in the southern North Atlantic Ocean (ODP site 1260). Across this interval, we determined changes in the stable carbon isotopic composition of sulfur-bound phytane (δ13Cphytane), a biomarker for photosynthetic algae. The δ13Cphytane record shows a positive excursion at the onset of the OAE-2 interval, with an unusually large amplitude (~7‰) compared to existing C/T proto-North Atlantic δ13Cphytane records (3–6‰). Overall, the amplitude of the excursion of δ13Cphytane decreases with latitude. Using reconstructed sea surface temperature (SST) gradients for the proto-North Atlantic, we investigated environmental factors influencing the latitudinal δ13Cphytane gradient. The observed gradient is best explained by high productivity at DSDP Site 367 and Tarfaya basin before OAE-2, which changed in overall high productivity throughout the proto-North Atlantic during OAE-2. During OAE-2, productivity at site 1260 and 603B was thus more comparable to the mid-latitude sites. Using these constraints as well as the SST and δ13Cphytane-records from Site 1260, we subsequently reconstructed pCO2 levels across the OAE-2 interval. Accordingly, pCO2 decreased from ca. 1750 to 900 ppm during OAE-2, consistent with enhanced organic matter burial resulting in lowering pCO2. Whereas the onset of OAE-2 coincided with increased pCO2, in line with a volcanic trigger for this event, the observed cooling within OAE-2 probably resulted from CO2 sequestration in black shales outcompeting CO2 input into the atmosphere. Together these results show that the ice-free Cretaceous world was sensitive to changes in pCO2 related to perturbations of the global carbon cycle.
A complete, well-preserved record of the Cenomanian/Turonian (C/T) Oceanic Anoxic Event 2 (OAE-2) was recovered from Demerara Rise in the southern North Atlantic Ocean (ODP site 1260). Across this interval, we determined changes in the stable carbon isotopic composition of sulfur-bound phytane (δ13Cphytane, a biomarker for photosynthetic algae. The δ13Cphytane record shows a positive excursion at the onset of the OAE-2 interval, with an unusually large amplitude (~7 ‰) compared to existing C/T proto-North Atlantic δ13Cphytane records (3–6 ‰). Overall, the amplitude of the excursion of δ13Cphytane decreases with latitude. Using reconstructed sea surface temperature (SST) gradients for the proto-North Atlantic, we investigated environmental factors influencing the latitudinal δ13Cphytane gradient. The observed gradient is best explained by high productivity at DSDP Site 367 and Tarfaya basin before OAE-2, which changed in overall high productivity throughout the proto-North Atlantic during OAE-2. During OAE-2, productivity at site 1260 and 603B was thus more comparable to the mid-latitude sites. Using these constraints as well as the SST and δ13Cphytane-records from Site 1260, we subsequently reconstructed pCO2 levels across the OAE-2 interval. Accordingly, pCO2 decreased from ca. 1750 to 900 ppm during OAE-2, consistent with enhanced organic matter burial resulting in lowering pCO2. Whereas the onset of OAE-2 coincided with increased pCO2, in line with a volcanic trigger for this event, the observed cooling within OAE-2 probably resulted from CO2 sequestration in black shales outcompeting CO2 input into the atmosphere. Together these results show that the ice-free Cretaceous world was sensitive to changes in pCO2 related to perturbations of the global carbon cycle.
The main objective of the study presented in this paper was to develop an evaluation scheme which is suitable for spatially explicit groundwater vulnerability assessment according to the Water Framework Directive (WFD). Study area was the Hase river catchment, an area of about 3 000 km2 in north-west Germany which is dominated by livestock farming, in particular pig and poultry production. For the Hase river catchment, the first inventory of the WFD led to the conclusion that 98% of the catchment area is "unclear/unlikely" to reach a good groundwater status due to diffuse nitrogen emissions from agriculture. The groundwater vulnerability assessment was embedded in the PartizipA project ("Participative modelling, Actor and Ecosystem Analysis in Regions with Intensive Agriculture", www.partizipa.net), within which a so-called actors´ platform was established in the study area. The objective of the participatory process was to investigate the effects of the WFD on agriculture as well as to discuss groundwater protection measures which are suitable for an integration in the programme of measures. The study was conducted according to the vulnerability assessment concept of the Intergovernmental Panel on Climate Change, considering sensitivity, exposure and adaptive capacity. Sensitivity was computed using the DRASTIC index of natural groundwater pollution potential. Exposure (for a reference scenario) was computed using the STOFFBILANZ nutrient model. Several regional studies were analysed to evaluate the adaptive capacity. From these studies it was concluded that the adaptive capacity in the Hase river catchment is very low due to the economic importance of the agricultural sector which will be significantly affected by groundwater protection measures. As a consequence, the adaptive capacity was not considered any more in the vulnerability assessment. A groundwater vulnerability evaluation scheme is presented which enjoys the advantage that both exposure and sensitivity can be operationalized in a spatially resolved manner (500×500 m grid) by the two models mentioned above. The evaluation scheme was applied in the Hase river catchment. 21% of the catchment was classified as highly vulnerable, another 73% as medium vulnerable. Only 6% of the Hase river catchment has low vulnerability. Grid cells of the high vulnerability class are considered as priority areas for groundwater protection measures in the programme of measures of the WFD. Measures will be particularly effective in the north-eastern part of the catchment where groundwater vulnerability is mainly due to high nitrogen emissions.
An evaluation scheme is presented in this paper which can be used to assess groundwater vulnerability according to the requirements of the European Water Framework Directive (WFD). The evaluation scheme results in a groundwater vulnerability map identifying areas of high, medium and low vulnerability, as necessary for the measurement planning of the WFD. The evaluation scheme is based on the definition of the vulnerability of the Intergovernmental Panel on Climate Change (IPCC). It considers exposure, sensitivity and the adaptive capacity of the region. The adaptive capacity is evaluated in an actors' platform, which was constituted for the region in the PartizipA ("Participative modelling, Actor and Ecosystem Analysis in Regions with Intensive Agriculture") project. As a result of the vulnerability assessment, 21% of the catchment area was classified as being highly vulnerable, whereas 73% has medium vulnerability and 6% has low vulnerability. Thus, a groundwater vulnerability assessment approach is presented, which can be used in practice on a catchment scale for the WFD measurement planning.
ucleation experiments starting from the reaction of OH radicals with SO2 have been performed in the IfT-LFT flow tube under atmospheric conditions at 293±0.5 K for a relative humidity of 13–61%. The presence of different additives (H2, CO, 1,3,5-trimethylbenzene) for adjusting the OH radical concentration and resulting OH levels in the range (4–300)·105 molecule cm−3 did not influence the nucleation process itself. The number of detected particles as well as the threshold H2SO4 concentration needed for nucleation was found to be strongly dependent on the counting efficiency of the used counting devices. High-sensitivity particle counters allowed the measurement of freshly nucleated particles with diameters down to about 1.5 nm. A parameterization of the experimental data was developed using power law equations for H2SO4 and H2O vapour. The exponent for H2SO4 from different measurement series was in the range of 1.7–2.1 being in good agreement with those arising from analysis of nucleation events in the atmosphere. For increasing relative humidity, an increase of the particle number was observed. The exponent for H2O vapour was found to be 3.1 representing a first estimate. Addition of 1.2·1011 molecule cm−3 or 1.2·1012 molecule cm−3 of NH3 (range of atmospheric NH3 peak concentrations) revealed that NH3 has a measureable, promoting effect on the nucleation rate under these conditions. The promoting effect was found to be more pronounced for relatively dry conditions. NH3 showed a contribution to particle growth. Adding the amine tert-butylamine instead of NH3, the enhancing impact for nucleation and particle growth appears to be stronger.
Nucleation experiments starting from the reaction of OH radicals with SO2 have been performed in the IfT-LFT flow tube under atmospheric conditions at 293±0.5 K for a relative humidity of 13–61%. The presence of different additives (H2, CO, 1,3,5-trimethylbenzene) for adjusting the OH radical concentration and resulting OH levels in the range (4–300) ×105 molecule cm -3 did not influence the nucleation process itself. The number of detected particles as well as the threshold H2SO4 concentration needed for nucleation was found to be strongly dependent on the counting efficiency of the used counting devices. High-sensitivity particle counters allowed the measurement of freshly nucleated particles with diameters down to about 1.5 nm. A parameterization of the experimental data was developed using power law equations for H2SO4 and H2O vapour. The exponent for H2SO4 from different measurement series was in the range of 1.7–2.1 being in good agreement with those arising from analysis of nucleation events in the atmosphere. For increasing relative humidity, an increase of the particle number was observed. The exponent for H2O vapour was found to be 3.1 representing an upper limit. Addition of 1.2×1011 molecule cm -3 or 1.2×1012 molecule cm -3 of NH3 (range of atmospheric NH3 peak concentrations) revealed that NH3 has a measureable, promoting effect on the nucleation rate under these conditions. The promoting effect was found to be more pronounced for relatively dry conditions, i.e. a rise of the particle number by 1–2 orders of magnitude at RH = 13% and only by a factor of 2–5 at RH = 47% (NH3 addition: 1.2×1012 molecule cm -3). Using the amine tert-butylamine instead of NH3, the enhancing impact of the base for nucleation and particle growth appears to be stronger. Tert-butylamine addition of about 1010 molecule cm -3 at RH = 13% enhances particle formation by about two orders of magnitude, while for NH3 only a small or negligible effect on nucleation in this range of concentration appeared. This suggests that amines can strongly influence atmospheric H2SO4-H2O nucleation and are probably promising candidates for explaining existing discrepancies between theory and observations.
The current study tested the assumption that floristic and functional diversity patterns are negatively related to soil nitrogen content. We analyzed 20 plots with soil N-contents ranging from 0.63% to 1.06% in a deciduous forest near Munich (Germany). To describe species adaptation strategies to different nitrogen availabilities, we used a plant functional type (PFT) approach. Each identified PFT represents one realized adaptation strategy to the current environment. These were correlated, next to plant species richness and evenness, to soil nitrogen contents. We found that N-efficient species were typical for low soil nitrogen contents, while N-requiring species occur at high N-contents. In contrast to our initial hypotheses, floristic and functional diversity measures (number of PFTs) were positively related to nitrogen content in the soil. Every functional group has its own adaptation to the prevailing environmental conditions; in consequence, these functional groups can co-exist but do not out-compete one another. The increased number of functional groups at high N-contents leads to increased species richness. Hence, for explaining diversity patterns we need to consider species groups representing different adaptations to the current environmental conditions. Such co-existing ecological strategies may even overcome the importance of competition in their effect on biodiversity.
Aim: Predicting future changes in species richness in response to climate change is one of the key challenges in biogeography and conservation ecology. Stacked species distribution models (S‐SDMs) are a commonly used tool to predict current and future species richness. Macroecological models (MEMs), regression models with species richness as response variable, are a less computationally intensive alternative to S‐SDMs. Here, we aim to compare the results of two model types (S‐SDMS and MEMs), for the first time for more than 14,000 species across multiple taxa globally, and to trace the uncertainty in future predictions back to the input data and modelling approach used.
Location: Global land, excluding Antarctica.
Taxon: Amphibians, birds and mammals.
Methods: We fitted S‐SDMs and MEMs using a consistent set of bioclimatic variables and model algorithms and conducted species richness predictions under current and future conditions. For the latter, we used four general circulation models (GCMs) under two representative concentration pathways (RCP2.6 and RCP6.0). Predicted species richness was compared between S‐SDMs and MEMs and for current conditions also to extent‐of‐occurrence (EOO) species richness patterns. For future predictions, we quantified the variance in predicted species richness patterns explained by the choice of model type, model algorithm and GCM using hierarchical cluster analysis and variance partitioning.
Results: Under current conditions, species richness predictions from MEMs and S‐SDMs were strongly correlated with EOO‐based species richness. However, both model types over‐predicted areas with low and under‐predicted areas with high species richness. Outputs from MEMs and S‐SDMs were also highly correlated among each other under current and future conditions. The variance between future predictions was mostly explained by model type.
Main conclusions: Both model types were able to reproduce EOO‐based patterns in global terrestrial vertebrate richness, but produce less collinear predictions of future species richness. Model type by far contributes to most of the variation in the different future species richness predictions, indicating that the two model types should not be used interchangeably. Nevertheless, both model types have their justification, as MEMs can also include species with a restricted range, whereas S‐SDMs are useful for looking at potential species‐specific responses.
Explosive volcanism affects weather and climate. Primary volcanic ash particles which act as ice nuclei (IN) can modify the phase and properties of cold tropospheric clouds. During the Eyjafjallajökull volcanic eruption we have measured the highest ice nucleus number concentrations (>600 L) in our record of 2 years of daily IN measurements in central Germany. Even in Israel, located about 5000 km away from Iceland, IN were as high as otherwise only during desert dust storms. These measurements are the only ones available on the properties of IN in the Eyjafjallajökull plume. The measured high concentrations and high activation temperature (−8 °C) point to an important impact of volcanic ash on microphysical and radiative properties of clouds through enhanced glaciation.
We have sampled atmospheric ice nuclei (IN) and aerosol in Germany and in Israel during spring 2010. IN were analyzed by the static vapor diffusion chamber FRIDGE, as well as by electron microscopy. During the Eyjafjallajökull volcanic eruption of April 2010 we have measured the highest ice nucleus number concentrations (>600 l−1) in our record of 2 yr of daily IN measurements in central Germany. Even in Israel, located about 5000 km away from Iceland, IN were as high as otherwise only during desert dust storms. The fraction of aerosol activated as ice nuclei at −18 °C and 119% rhice and the corresponding area density of ice-active sites per aerosol surface were considerably higher than what we observed during an intense outbreak of Saharan dust over Europe in May 2008.
Pure volcanic ash accounts for at least 53–68% of the 239 individual ice nucleating particles that we collected in aerosol samples from the event and analyzed by electron microscopy. Volcanic ash samples that had been collected close to the eruption site were aerosolized in the laboratory and measured by FRIDGE. Our analysis confirms the relatively poor ice nucleating efficiency (at −18 °C and 119% ice-saturation) of such "fresh" volcanic ash, as it had recently been found by other workers. We find that both the fraction of the aerosol that is active as ice nuclei as well as the density of ice-active sites on the aerosol surface are three orders of magnitude larger in the samples collected from ambient air during the volcanic peaks than in the aerosolized samples from the ash collected close to the eruption site. From this we conclude that the ice-nucleating properties of volcanic ash may be altered substantially by aging and processing during long-range transport in the atmosphere, and that global volcanism deserves further attention as a potential source of atmospheric ice nuclei.
Residual circulation trajectories and transit times into the extratropical lowermost stratosphere
(2010)
Transport into the extratropical lowermost stratosphere (LMS) can be divided into a slow part (time-scale of several months to years) associated with the global-scale stratospheric residual circulation and a fast part (time-scale of days to a few months) associated with (mostly quasi-horizontal) mixing (i.e. two-way irreversible transport, including stratosphere-troposphere exchange). The stratospheric residual circulation can be considered to consist of two branches: a deep branch more strongly associated with planetary waves breaking in the middle to upper stratosphere, and a shallow branch more strongly associated with synoptic-scale waves breaking in the subtropical lower stratosphere. In this study the contribution due to the stratospheric residual circulation alone to transport into the LMS is quantified using residual circulation trajectories, i.e. trajectories driven by the (time-dependent) residual mean meridional and vertical velocities. This contribution represents the advective part of the overall transport into the LMS and can be viewed as providing a background onto which the effect of mixing has to be added. Residual mean velocities are obtained from a comprehensive chemistry-climate model as well as from reanalysis data. Transit times of air traveling from the tropical tropopause to the LMS along the residual circulation streamfunction are evaluated and compared to recent mean age of air estimates. A clear time-scale separation with much smaller transit times into the mid-latitudinal LMS than into polar LMS is found that is indicative of a clear separation of the shallow from the deep branch of the residual circulation. This separation between the shallow and the deep circulation branch is further manifested in a clear distinction in the aspect ratio of the vertical to meridional extent of the trajectories as well as the integrated mass flux along the residual circulation trajectories. The residual transit time distribution reproduces qualitatively the observed seasonal cycle of youngest air in the extratropical LMS in fall and oldest air in spring.
Residual circulation trajectories and transit times into the extratropical lowermost stratosphere
(2011)
Transport into the extratropical lowermost stratosphere (LMS) can be divided into a slow part (time-scale of several months to years) associated with the global-scale stratospheric residual circulation and a fast part (time-scale of days to a few months) associated with (mostly quasi-horizontal) mixing (i.e. two-way irreversible transport, including extratropical stratosphere-troposphere exchange). The stratospheric residual circulation may be considered to consist of two branches: a deep branch more strongly associated with planetary waves breaking in the middle to upper stratosphere, and a shallow branch associated with synoptic and planetary scale waves breaking in the subtropical lower stratosphere. In this study the contribution due to the stratospheric residual circulation alone to transport into the LMS is quantified using residual circulation trajectories, i.e. trajectories driven by the (time-dependent) residual mean meridional and vertical velocities. This contribution represents the advective part of the overall transport into the LMS and can be viewed as providing a background onto which the effect of mixing has to be added. Residual mean velocities are obtained from a comprehensive chemistry-climate model as well as from reanalysis data. Transit times of air traveling from the tropical tropopause to the LMS along the residual circulation streamfunction are evaluated and compared to recent mean age of air estimates. A time-scale separation with much smaller transit times into the mid-latitudinal LMS than into polar LMS is found that is indicative of a separation of the shallow from the deep branch of the residual circulation. This separation between the shallow and the deep circulation branch is further manifested in a distinction in the aspect ratio of the vertical to meridional extent of the trajectories, the integrated mass flux along the residual circulation trajectories, as well as the stratospheric entry latitude of the trajectories. The residual transit time distribution reproduces qualitatively the observed seasonal cycle of youngest air in the extratropical LMS in fall and oldest air in spring.
The Miocene was a key time in the evolution of African ecosystems witnessing the origin of the African apes and the isolation of eastern coastal forests through an expanding arid corridor. Until recently, however, Miocene sites from the southeastern regions of the continent were unknown. Here, we report the first Miocene fossil teeth from the shoulders of the Urema Rift in Gorongosa National Park, Mozambique. We provide the first 1) radiometric ages of the Mazamba Formation, 2) reconstructions of paleovegetation in the region based on pedogenic carbonates and fossil wood, and 3) descriptions of fossil teeth. Gorongosa is unique in the East African Rift in combining marine invertebrates, marine vertebrates, reptiles, terrestrial mammals, and fossil woods in coastal paleoenvironments. The Gorongosa fossil sites offer the first evidence of woodlands and forests on the coastal margins of southeastern Africa during the Miocene, and an exceptional assemblage of fossils including new species.
The Miocene is a key time in the evolution of African mammals and their ecosystems witnessing the origin of the African apes and the isolation of eastern coastal forests through an expanding biogeographic arid corridor. Until recently, however, Miocene sites from the southeastern regions of the continent were unknown. Here we report discovery of the first Miocene fossil teeth from the shoulders of the Urema Rift in Gorongosa National Park, Mozambique, at the southern East African Rift System. We provide the first 1) radiometric age determinations of the fossiliferous Mazamba Formation, 2) reconstructions of past vegetation in the region based on pedogenic carbonates and fossil wood, and 3) description of fossil teeth from the southern rift. Gorongosa is unique in the East African Rift System in combining marine invertebrates, marine vertebrates, terrestrial mammals, and fossil woods in coastal paleoenvironments. The Gorongosa fossil sites offer the first evidence of persistent woodlands and forests on the coastal margins of southeastern Africa during the Miocene, and an exceptional assemblage of fossil vertebrates including new species. Further work will allow the testing of hypotheses positing the formation of a northeast-southwest arid corridor isolating species on the eastern coastal forests from those elsewhere in Africa.
Brief The Miocene is a key time in the evolution of African mammals and their ecosystems encompassing hominine origins and the establishment of an arid corridor that isolated eastern Africa’s coastal forests. Until now, however, Miocene sites from southeastern Africa have been unknown. We report the discovery of the first Miocene fossil sites from Gorongosa National Park, Mozambique, and show that these sites formed in coastal settings. We provide radiometric ages for the fossiliferous sediments, reconstructions of past vegetation based on stable isotopes and fossil wood, and a description of the first fossil teeth from the region. Gorongosa is the only paleontological site in the East African Rift that combines fossil woods, marine invertebrates, marine vertebrates, and terrestrial mammals. Gorongosa offers the first evidence of persistent woodlands and forests on the coastal margins of southeastern Africa during the Miocene.
The link between atmospheric radicals and newly formed particles at a spruce forest site in Germany
(2013)
It has been claimed for more than a century that atmospheric new particle formation is primarily influenced by the presence of sulphuric acid. However, the activation process of sulphuric acid related clusters into detectable particles is still an unresolved topic. In this study we focus on the PARADE campaign measurements conducted during August/September 2011 at Mt. Kleiner Feldberg in central Germany. During this campaign a set of radicals, organic and inorganic compounds and oxidants and aerosol properties were measured or calculated. We compared a range of organic and inorganic nucleation theories, evaluating their ability to simulate measured particle formation rates at 3 nm in diameter (J3) for a variety of different conditions. Nucleation mechanisms involving only sulphuric acid tentatively captured the observed noon-time daily maximum in J3, but displayed an increasing difference to J3 measurements during the rest of the diurnal cycle. Including large organic radicals, i.e. organic peroxy radicals (RO2) deriving from monoterpenes and their oxidation products in the nucleation mechanism improved the correlation between observed and simulated J3. This supports a recently proposed empirical relationship for new particle formation that has been used in global models. However, the best match between theory and measurements for the site of interest was found for an activation process based on large organic peroxy radicals and stabilized Criegee intermediates (sCI). This novel laboratory derived algorithm simulated the daily pattern and intensity of J3 observed in the ambient data. In this algorithm organic derived radicals are involved in activation and growth and link the formation rate of smallest aerosol particles with OH during daytime and NO3 during nighttime. Because of the RO2s lifetime is controlled by HO2 and NO we conclude that peroxy radicals and NO seem to play an important role for ambient radical chemistry not only with respect to oxidation capacity but also for the activation process of new particle formation. This is supposed to have significant impact of atmospheric radical species on aerosol chemistry and should to be taken into account when studying the impact of new particles in climate feedback cycles.
The link between atmospheric radicals and newly formed particles at a spruce forest site in Germany
(2014)
It has been claimed for more than a century that atmospheric new particle formation is primarily influenced by the presence of sulfuric acid. However, the activation process of sulfuric acid related clusters into detectable particles is still an unresolved topic. In this study we focus on the PARADE campaign measurements conducted during August/September 2011 at Mt Kleiner Feldberg in central Germany. During this campaign a set of radicals, organic and inorganic compounds and oxidants and aerosol properties were measured or calculated. We compared a range of organic and inorganic nucleation theories, evaluating their ability to simulate measured particle formation rates at 3 nm in diameter (J3) for a variety of different conditions. Nucleation mechanisms involving only sulfuric acid tentatively captured the observed noon-time daily maximum in J3, but displayed an increasing difference to J3 measurements during the rest of the diurnal cycle. Including large organic radicals, i.e. organic peroxy radicals (RO2) deriving from monoterpenes and their oxidation products, in the nucleation mechanism improved the correlation between observed and simulated J3. This supports a recently proposed empirical relationship for new particle formation that has been used in global models. However, the best match between theory and measurements for the site of interest was found for an activation process based on large organic peroxy radicals and stabilised Criegee intermediates (sCI). This novel laboratory-derived algorithm simulated the daily pattern and intensity of J3 observed in the ambient data. In this algorithm organic derived radicals are involved in activation and growth and link the formation rate of smallest aerosol particles with OH during daytime and NO3 during night-time. Because the RO2 lifetime is controlled by HO2 and NO we conclude that peroxy radicals and NO seem to play an important role for ambient radical chemistry not only with respect to oxidation capacity but also for the activation process of new particle formation. This is supposed to have significant impact of atmospheric radical species on aerosol chemistry and should be taken into account when studying the impact of new particles in climate feedback cycles.
Atmospheric new particle formation is a general phenomenon observed over coniferous forests. So far nucleation is described as a function of gaseous sulfuric acid concentration only, which is unable to explain the observed seasonality of nucleation events at different measurement sites. Here we introduce a new nucleation parameter including ozone and water vapor concentrations as well as UV-B radiation as a proxy for OH radical formation. Applying this new parameter to field studies conducted at Finnish and German measurement sites it is found capable to predict the occurrence of nucleation events and their seasonal and annual variation indicating a significant role of organics. Extrapolation to possible future conditions of ozone, water vapor and organic concentrations leads to a significant potential increase in nucleation event number.
Atmospheric new particle formation is a general phenomenon observed over coniferous forests. So far nucleation is either parameterised as a function of gaseous sulphuric acid concentration only, which is unable to explain the observed seasonality of nucleation events at different measurement sites, or as a function of sulphuric acid and organic molecules. Here we introduce different nucleation parameters based on the interaction of sulphuric acid and terpene oxidation products and elucidate the individual importance. They include basic trace gas and meteorological measurements such as ozone and water vapour concentrations, temperature (for terpene emission) and UV B radiation as a proxy for OH radical formation. We apply these new parameters to field studies conducted at conducted at Finnish and German measurement sites and compare these to nucleation observations on a daily and annual scale. General agreement was found, although the specific compounds responsible for the nucleation process remain speculative. This can be interpreted as follows: During cooler seasons the emission of biogenic terpenes and the OH availability limits the new particle formation while towards warmer seasons the ratio of ozone and water vapour concentration seems to dominate the general behaviour. Therefore, organics seem to support ambient nucleation besides sulphuric acid or an OH-related compound. Using these nucleation parameters to extrapolate the current conditions to prognosed future concentrations of ozone, water vapour and organic concentrations leads to a significant potential increase in the nucleation event number.
In this study we report the set-up of a novel twin chamber technique that uses the comparative method and establishes an appropriate connection of atmospheric and laboratory methods to broaden the tools for investigations. It is designed to study the impact of certain parameters and gases on ambient processes, such as particle formation online, and can be applied in a large variety of conditions. The characterisation of both chambers proved that both chambers operate identically, with a residence time xT (COMPASS1) = 26.5 ± 0.3 min and xT (COMPASS2) = 26.6 ± 0.4 min, at a typical flow rate of 15 L min−1 and a gas leak rate of (1.6 ± 0.8) × 10−5 s−1. Particle loss rates were found to be larger (due to the particles' stickiness to the chamber walls), with an extrapolated maximum of 1.8 × 10−3 s−1 at 1 nm, i.e. a hundredfold of the gas leak rate. This latter value is associated with sticky non-volatile gaseous compounds, too. Comparison measurement showed no significant differences. Therefore operation under atmospheric conditions is trustworthy. To indicate the applicability and the benefit of the system, a set of experiments was conducted under different conditions, i.e. urban and remote, enhanced ozone and terpenes as well as reduced sunlight. In order to do so, an ozone lamp was applied to enhance ozone in one of two chambers; the measurement chamber was protected from radiation by a first-aid cover and volatile organic compounds (VOCs) were added using a small additional flow and a temperature-controlled oven. During the elevated ozone period, ambient particle number and volume increased substantially at urban and remote conditions, but by a different intensity. Protection of solar radiation displayed a clear negative effect on particle number, while terpene addition did cause a distinct daily pattern. E.g. adding β pinene particle number concentration rose by 13% maximum at noontime, while no significant effect was observable during darkness. Therefore, the system is a useful tool for investigating local precursors and the details of ambient particle formation at surface locations as well as potential future feedback processes.
The anthropogenic influence on climate and environment has increased strongly since industrialization about 150 yr ago. The consequences for the atmosphere became more and more apparent and nowadays affect our life quality on Earth progressively. Because of that it is very important to understand the atmospheric processes, on which these effects are based on, in detail. In this study we report the set-up of a novel twin chamber technique that uses the comparative method and establishes an appropriate connection of atmospheric and laboratory methods to broaden the tools for investigations. It is designed to study the impact of certain parameters and gases on ambient processes such as particle formation online and can be applied in a large variety of conditions. The characterisation of both chambers proved that both chambers operate identically with a residence time (xT (COMPASS 1) = 26.5 ± 0.3 min and xT (COMPASS 2) = 26.6 ± 0.4 min) at a typical flow rate of 15 L min−1 and a deposition rate (1.6 ± 0.8) × 10−5 s−1. Comparison measurement showed no significant differences. Therefore operation under atmospheric conditions is trustworthy. To indicate the applicability and the benefit of the system a set of experiments was conducted at different conditions, i.e. urban and remote, enhancing ozone and terpenes as well as reducing sunlight. In the ozone enhanced ambient particle number and volume increased substantially at urban and remote conditions in a different strength. Solar radiation displayed a clear positive effect on particle number as well as terpene addition did at remote conditions. Therefore the system is a useful tool to investigate local precursors, the details of ambient particle formation at surface locations as well as future feedback processes.