Refine
Year of publication
- 2007 (6) (remove)
Document Type
- Doctoral Thesis (6)
Language
- English (6) (remove)
Has Fulltext
- yes (6)
Is part of the Bibliography
- no (6)
Keywords
- ABC-Transporter (1)
- Carrier-Proteine (1)
- Hydrolasen (1)
- Membrane-Proteine (1)
- Sulfolobus solfataricus (1)
Institute
Membrane proteins play vital role in a variety of cellular processes, such as signal transduction, transport and recognition. In turn they are involved in numerous human diseases and currently represent one of the most prevalent drug targets. A comprehensive understanding of the mechanisms mediated by membrane proteins requires information about their structures at near-atomic resolution, although structural studies of membrane proteins remain behind those of soluble proteins. A bottleneck in the study of membrane proteins resides in the difficulties that are encountered during their high-level production in cell based systems. However, many toxic effects attributed to the over production of membrane proteins are eliminated by cell-free expression, as viable host cells are no longer required. Therefore, the objective of this study was to obtain adequate amounts of selected membrane transport proteins for their structural studies using a cell-free expression system. For the establishment of the cell-free system for membrane proteins, the transporters YbgR and YiiP from Salmonella typhimurium LT2, PF0558 and PF1373 from Pyrococcus furiosus, from the cation diffusion family (CDF), BetP from Corynebacterium glutamicum from the betaine/carnitine/choline transporter (BCCT) family and Aq-2030 from Aquifex aeolicus VF5 from the monovalent cation/proton antiporter-2 (CPA2) family were selected. An Escherichia coli S-30 extract based cellfree system was established by generating the best expression constructs of the target proteins, preparing T7 RNA polymerase and an S-30 extract with high translation efficiency. The functionality of the S-30 extract was shown by the cell-free expression of correctly folded Green Fluorescent Protein (GFP). Essential factors of the cell-free system such as the Mg2+ concentration, the bacterial S-30 extract proportion in the reaction mixture and the time-course of cell-free reactions have been optimized. For the cell-free production of membrane proteins in soluble form, the possibility to supplement cell-free reactions with detergents was explored. A wide range of non-ionic or zwitterionic detergents, were found to be compatible with cell-free synthesis, while ionic detergents and non-ionic detergents at high concentrations had an inhibitory effect. Moreover, high concentrations of polyoxyethylene-alkyl-ethers (Brij) detergents were found to have enhancing effect on the production levels as well as on the solubility of cell-free produced proteins. As membrane proteins tend to misfold and aggregate in a membrane-free translation system, the possibility to supplement the cell-free reactions with inner membrane vesicles (IMVs) to obtain correctly folded target transport proteins was explored. All the target proteins were successfully produced in the batch cell-free reactions and were found to be incorporated in the IMVs. A continuous exchange cell-free (CECF) system was established, where consumable substrates (amino acids, nucleotides and energy regenerating compounds) were supplied to the cell-free reaction mixture through a dialysis membrane, which in consequence resulted in high-level production of target proteins compared to the batch system. The osmosensing and osmoregulated sodium-coupled symporter BetP from C. glutamicum was chosen for the large scale production in CECF set-up. The protein is easily produced in E. coli and is functional as assayed by its transport activity, after purification and reconstitution in liposomes. It is therefore possible to compare in-vivo and cell-free production. High-level cell-free production of BetP was achieved in CECF mode in different forms: (i) as precipitate, (ii) as soluble form in detergent, and (iii) incorporated in IMVs. Cell-free production of BetP resulted in the yield of about 0.5 mg of purified BetP from 1 ml of CECF reaction. The yield of purified BetP was increased to 1.6 fold by addition of 1% polyoxyethylene-(20)-cetyl-ether (Brij58) detergent in the reaction mixture. Moreover, the high level cell-free production of BetP (0.5 mg purified BetP/ml reaction mixture) incorporated in IMVs was shown for the first time in this work.However, it was observed that oligomerization of BetP was not efficient in the cell-free system. Factors that can promote the folding of membrane proteins such as lipids and chaperones were investigated. Addition of lipids and molecular chaperone GroE facilitated correct folding of BetP resulting in increased yield and stability of cell-free produced BetP. The results obtained indicate that most of the cell-free produced BetP exists in functional oligomeric form. The possibility of obtaining milligram amounts of BetP, a 12 trans-membrane protein from the cell-free reactions holds promise for structural and functional studies of other membrane proteins. In any case, the strategies adapted in this study should prove extremely valuable for the production of membrane proteins in the E. coli cell-free expression system.
G-protein coupled receptors (GPCRs) comprise the largest superfamily of cell surface receptors and possess a signature motif of seven transmembrane helices. The endothelin B (ETB) receptor is a member of rhodopsin like GPCR family. It plays an important role in vasodilation and is found in the membranes of the endothelial cells enveloping blood vessels. Knowledge of the three-dimensional structure of G-protein coupled receptors in general would significantly add to our understanding of their molecular mechanisms and would be useful in the search for new specific drugs. However, three-dimensional structural analysis will require milligram quantities of pure and homogeneous protein. This dissertation is a study of the production, biochemical characterization and preliminary structural studies of the human ETB G-protein coupled receptor. The present work aimed at elucidating the structure and mechanistic details of function of the receptor by using a combination of X-ray crystallographic and NMR methods for collecting structural data. To obtain homogenous and monodisperse receptor protein preparation for structural and functional studies, we implemented the baculovirus expression system for the production of ETB receptor for the present work. The two step affinity purification ensured capture of full-length receptor. Silver stained SDS-PAGE of the purified receptor-ligand complex indicated greater than 90% protein purity. Based on previous reports, we used the high affinity ligand (endothelin -1) binding to the receptor for co-crystallization of receptor-ligand complex by locking the receptor in the activated conformation. As a prerequisite for 3D crystallization trials, the stability of the detergent solubilized receptor-ligand complex was assessed with respect to pH, temperature and time. Receptor-ligand complex did not show any degradation and aggregation over 6 days at 4°C and 18°C. Interestingly, change of pH suggested that receptor-ligand complex is unstable at lower pH due to possible charge induced conformational changes. In our work, we introduced the idea of using fluorophore labeled ligand for simple visual recognition of the receptor-ligand complex during purification and crystallization. On the other hand, we alternatively used biotinylated endothelin-1 to produce an adequate amount of ligand bound receptor complex, thus ensuring homogeneity of the purified complex for use in structural studies. Thus far, preliminary crystals have been obtained for both the unlabelled ET-1 and fluorophore labeled ET-1 complexed with ETB receptor. Moreover, we performed the systematic investigation of the protein/peptide binding partner for the receptor-ligand complex with the chief aims of stabilizing structure and increasing the possibilities of 3D-crystal contacts. Thus subsequent to formation of receptor-ligand complex, the additional in vitro formation of a ternary arrestin-receptor-ligand complex was also attempted for use in structural studies. We successfully demonstrated that arrestin mutant (R169E) forms a tight complex with ETB receptor regardless of its phosphorylation state. A second approach to get insight into the ETB receptor ligand binding site relied on the use of spin isotope labeled ET-1 ligand peptide by employing solid state MAS NMR method. Preliminary data provided compelling evidence that the C-terminal region of the peptide is immobilized in an ordered environment and presumably bound to the receptor. This indicates that the approach is feasible, although there are difficulties in sample preparation for further spectral measurements and data collection which are currently being discussed in ongoing investigations. At this point of our research work, we initiated a collaborative effort to obtain high yields of pure, active receptor without post translational modifications, from an E. coli cell lysate based in vitro expression system. We successfully optimized the production of homogenous and monodisperse endothelin B receptor in mg amounts. Thus this could potentially provide an alternative source of high quality receptor production in large quantities for immediate crystallization trials. Thus we hope that the results from these investigations can be applied in a more general sense to the production and crystallization of other G protein-coupled receptors.
1. Halobacillus halophilus akkumuliert zum Ausgleich geringer, extrazellulärer Wasserpotentiale kompatible Solute. Bei Anzuchten in Gegenwart von 0,4 – 1,5 M NaCl wurden Glutamin und Glutamat als die dominierenden kompatiblen Solute identifiziert, während zwischen 2,0 und 3,0 M NaCl Prolin das dominierende Solut darstellt. Außerdem wurde Ectoin als zweites kompatibles Solut gefunden, das spezifisch bei hohen Salzgehalten akumuliert wird. Die Konzentrationen während der exponentiellen Wachstumsphase war jedoch um den Faktor 6 – 7 geringer im Vergleich zu Prolin. 2. Aus Wachstumsexperimenten in Gegenwart unterschiedlicher Anionen war bekannt, dass Glutamat, im Gegensatz zu Gluconat und Nitrat, in der Lage ist, das Wachstum von H. halophilus auch in Abwesenheit von Chlorid zu ermöglichen. Um der Frage nachzugehen, ob die wachstumsfördernde Wirkung von unphysiologisch hohen Glutamat-Konzentrationen im Medium auf die Verwendung von Glutamat als kompatiblem Solut in den Zellen zurückzuführen ist, wurden Gesamtsolutepools von Chlorid-, Nitrat-, Gluconat- und Glutamat-gezogenen Zellen gemessen. In NaCl-gezogenen Zellen zeigte sich Glutamat als dominantes Solut, während Prolin und Glutamin einen geringeren Teil am Gesamtpool ausmachten. In Nitrat-gezogenen Zellen betrug der Gesamtpool nur noch 83% und in Gluconat-gezogenen Zellen nur noch 27% im Vergleich zu Chlorid-gezogenen Zellen. Zellen, die mit Glutamat gezogen wurden, zeigten jedoch eine Gesamtkonzentration an Soluten, die ca. 100% über dem Vergleichswert aus Chlorid-gezogenen Zellen lag. Die Konzentration an Glutamin in den Zellen stieg dabei um 168%, die Konzentration an Glutamat sogar um 299%. Die Prolinkonzentration verringerte sich um 32%. Diese Daten belegen, dass der wachstumsstimulierende Effekt von Glutamat auf die Verwendung als kompatibles Solut zurückzuführen ist. 3. Zur Untersuchung der molekularen Grundlage der Salzadaptation sowie der Abhängigkeit von Chlorid in H. halophilus wurde in Zusammenarbeit mit der Gruppe von Prof. D. Oesterhelt (MPI für Biochemie, Martinsried) die Sequenzierung des Genoms begonnen. Das Projekt ist zur Zeit noch nicht abgeschlossen und befindet sich in der „Lückenschluß-Phase“. Die bisherigen Sequenzdaten konnten dennoch für die in dieser Arbeit beschriebenen Untersuchungen herangezogen werden. Das Genom besitzt eine Größe von ca. 4,1 Mbp mit einem ungefähren GC-Gehalt von 40%. Außerdem wurden 2 Plasmide identifiziert mit einer Größe von 16047 und 3329 bp. 4. Die Schlüsselgene bekannter Biosynthesewege für Glutamin und Glutamat konnten identifiziert werden. Darunter befinden sich zwei Isogene für eine Glutamatdehydrogenase (gdh1 und gdh2), ein Gen für die große Untereinheit einer Glutamatsynthase (gltA), zwei Gene für die kleine Untereinheit einer Glutamat-Synthase (gltB1 und gltB2) und zwei Isogene für eine Glutaminsynthetase (glnA1 und glnA2). glnA1 befindet sich in einem Cluster zusammen mit einem Gen, das für einen Regulator kodiert (glnR), wie er auch aus B. subtilis bekannt ist. Über reverse Transkription von mRNA und anschließender PCR-Analyse konnte gezeigt werden, dass sowohl gltA/gltB1 als auch glnA1/glnR in einem Operon organisiert sind. 5. Wurde die Transkriptmenge der in Punkt 4 erwähnten Biosynthesegene in Zellen quantifiziert, die in Gegenwart unterschiedlicher Salzkonzentrationen (0,4 – 3,0 M NaCl) gezogen wurden, so zeigte sich keine Abhängigkeit von der Salzkonzentration für die Gene gltA, glnA1 und gdh1. Über die Transkriptmengen von gdh2 ließ sich keine abschließende Aussage treffen, da die gefundenen Transkriptmengen sehr gering waren und daher zu sehr großen Varianzen bei der Quantifizierung führten. Eine klare Abhängigkeit der Transkriptmenge von der im Medium zugesetzten Salzkonzentration konnte für glnA2 gezeigt werden. Die glnA2 mRNA-Menge stieg dabei mit steigender Salzkonzentration an und erreichte bei 1,5 – 2.0 M NaCl ein Maximum. Bei diesen Salzkonzentrationen war die Menge an mRNA ca. 4 mal höher als der Vergleichswert bei 0,4 M NaCl. Bei höhern Salzkonzentrationen sank die Menge an Transkript wieder leicht und war dann ca. nur noch 3 mal so hoch wie bei 0,4 M NaCl. 6. Die zelluläre Konzentration der glnA2-Transkripte in Abhängigkeit unterschiedlicher Anionen im Anzuchtmedium wurde untersucht. Die Quantifizierung der glnA2–mRNA ergab eine 2 mal höhere Transkriptmenge in Gegenwart von Chlorid verglichen mit Nitrat oder Gluconat. 7. Es wurde nach Enzymaktivitäten der bekannten Schlüsselenzyme im Glutamat und Glutamin-Biosyntheseweg gesucht. Eine Glutamatdehydrogenase und eine Glutamatsynthase – Aktivität konnte nicht oder nur in vernachlässigbarem Maße nachgewiesen werden. Im Gegensatz dazu konnt eine Glutaminsynthetase – Aktivität eindeutig belegt werden. Diese Aktivität erwies sich abhängig von der Art und der Konzentration des angebotenen Anions im Medium. Maximale Aktivitäten wurden mit NaCl in einer Konzentration von 2,5 – 3,0 M erreicht. Interessanterweise erwies sich die Glutaminsynthetase – Aktivität auch abhängig von der Art des im Testpuffers verwendeten Anions. Hier zeigte sich eine deutliche Stimulierung der Aktivität durch das Anion Chlorid. [Die für diesen Punkt zugrunde liegenden Daten wurden im Rahmen einer von mir mitbetreuten Diplomarbeit von Jasmin F. Sydow erhoben und sind aus Gründen der vollständigen Darstellung des Projektverlaufes mitaufgeführt!] 8. Wie im Punkt 1 dargelegt, wird Prolin vor allem bei hohen Salzkonzentrationen in H. halophilus - Zellen akkumuliert. Neben der Abhängigkeit von der Salzkonzentration wurde außerdem die Abhängigkeit von der Wachstumsphase untersucht. Die Analyse der Prolinkonzentrationen während verschiedener Wachstumsphasen in Kulturen, die bei 1,0 bzw. 2,5 M NaCl angezogen wurden, zeigte, (i) dass die Prolinkonzentration während der frühen exponentiellen Phase ca. 2,5-fach erhöht war im Vergleich zu Niedrigsalz-Zellen, (ii) dass die Prolinkonzentration beim Übergang von der frühen in die späte exponentielle Phase dramatisch abnahm (um 64% bei 2,5 M NaCl) und dass (iii) in der stationären Phase Prolin praktisch nicht mehr nachzuweisen war. 9. Die Biosynthesegene für die Herstellung von Prolin aus Glutamat konnten im Genom von H. halophilus identifiziert werden. Es handelt sich dabei um ein Cluster von 3 Genen, die für eine putative Pyrrolin-5-carboxylatreductase (proH), eine Glutamat-5-kinase (proJ), und eine Glutamat-5-semialdehyd-dehydrogenase (proA) kodieren. Mittels reverser Transkription von mRNA und anschließenden PCR-Analysen konnte gezeigt werden, dass die drei Gene ein Operon bilden. 10. Eine Quantifizierung der Transkriptmengen der Biosynthesegene proH, proJ und proA mittels quantitativer PCR in Zellen, die bei unterschiedlichen NaCl-Konzentrationen gezogen wurden, zeigte einen deutlichen Zusammenhang zwischen der Salinität des Mediums und der Menge an Transkript. Diese war umso höher, je höher die Salinität des Mediums war. Die maximale Transkriptmenge (6-fach) wurde bei einer Salzkonzentration von 2,5 M NaCl erreicht. Bei noch höherer Salzkonzentration sank die Transkriptmenge auf die ca. 5-fache Menge des Kontrollwertes ab. 11. Um die Regulation und Dynamik der Osmoregulation unabhängig vom Wachstum untersuchen zu können, wurde ein Zellsuspensions-System für H. halophilus etabliert, bei dem eine konzentrierte Zellsuspension direkt von geringen auf hohe Salzkonzentrationen überführt wurde und bei dem die Prozesse der Transkription, Translation und Solut-Biosynthese erhalten blieben. Beispielhaft wurde dieses System an der Produktion von Prolin nach einem Salzschock von 0,8 auf 2,0 M NaCl getestet. Es zeigte sich bei der Analyse, dass sich die Transkriptmengen unmittelbar nach dem Salzschock deutlich erhöhten und bereits nach 1,5 Stunden ein Maximum erreicht wurde. Verglichen mit dem Wert zu Beginn des Versuches waren die Transkriptmengen ca. 13-fach erhöht, sanken im weiteren Verlauf jedoch wieder ab und blieben bei einer 4-fachen Transkriptmenge konstant. Mit der Erhöhung der Transkriptmenge ging auch eine Erhöhung der Prolinkonzentration einher, die ein Maximum von ca. 6 μmol/mg Protein nach 6 Stunden erreichte. Auch diese Konzentration verringerte sich im weiteren Verlauf wieder und erreichte nach 20 Stunden den Ausgangswert. 12. Um den Einfluß diverser Anionen bzw. Osmolyte im Medium auf die Produktion von Prolin zu untersuchen, wurden Zellsuspensionen von H. halophilus einer Erhöhung der Osmolarität von 0,8 M auf 2,0 M unterzogen. Es zeigte sich dabei, dass die maximale Akkumulation von Prolin in Anwesenheit von Chlorid am höchsten war. Nitrat und Glutamat führten zu ähnlichen, aber leicht geringeren maximalen Konzentrationen (92 bzw. 83% des Chloridwertes). Gluconat führte noch zu einer Akkumulation von ca. 51%, während die anderen Osmolyte zu keiner Akkumulation führten. Eine Analyse der Transkriptmengen zeigte jedoch ein völlig anderes Bild. Während Chlorid, Nitrat und Gluconat zu vergleichbaren Anstiegen der Transkripmengen führten, war die maximale Transkriptmenge der Glutamatinkubierten Zellen 3-9 mal höher als in Vergleichszellen mit Chlorid. In anschließenden Titrationsexperimenten mit verschiedenen Glutamatkonzentrationen konnte gezeigt werden, dass eine minimale Konzentration von 0,2 M Glutamat ausreichend ist, um eine 90-fache Steigerung der Transkriptmenge herbeizuführen. 13. Als Antwort auf Hochsalz-Bedingungen akkumuliert H. halophilus neben Prolin auch Ectoin. Die Ectoinkonzentration bei 2,5 M NaCl war ca. 2-3 mal höher als in Zellen, die bei 1,0 M gezogen wurden. Die Bestimmung der intrazellulären Ectoin-Konzentrationen während des Wachstums zeigte außerdem, dass die Produktion von Ectoin wachstumsphasenabhängig ist. Die Konzentration in der stationären Phase war ca. 5-fach höher als in der exponentiellen Phase. Die Entwicklung der Ectoin- Konzentration verhielt sich somit reziprok zur Entwicklung der Prolin-Konzentration während des Wachstums. 14. Es wurde ein Cluster von drei Genen im Genom von H. halophilus identifiziert, deren Genprodukte die Biosynthese von Ectoin aus Aspartatsemialdehyd katalysieren. ectA kodiert dabei für eine putative Diaminobutyrat-Acetyltransferase, ectB für eine putative Diaminobutyrat-2-oxoglutarat-Transaminase und ectC für eine putative Ectoin-Synthase. Mittels reverser Transkription von mRNA und anschließenden PCR-Analysen konnte gezeigt werden, dass die drei Gene ein Operon bilden. 15. Die Transkription der ect-Gene war abhängig von der Salinität des Mediums. Ab 2,0 M stieg die Menge an RNA um das 10-fache an und erreichte bei 3,0 M ein Maximum mit der 23,5-fachen Menge. 16. Nach einem osmotischen Schock stieg die Konzentration an ect-mRNA signifikant und erreichte ein Maximum nach 3 - 4 Stunden. Das Maximum wurde somit 1,5 – 2,5 Stunden später erreicht als bei anderen Genen der Solute-Biosynthese wie etwa gdh1, das für eine Glutamatdehydrogenase, glnA2, das für eine Glutamin-Synthetase oder proH, das für eine Pyrrolin-5-Carboxylase kodiert. Die maximal erreichten Wert lagen 13-fach (ectA), 6,5-fach (ectB) und 3-fach (ectC) über dem Wert vor dem Salzschock. Gegen EctC wurden polyklonale Antikörper generiert. Western-Blot Analysen mit diesem Antikörper zeigten, dass die EctC-Menge nach 4 Stunden um das 2,5-fache stieg, dann aber wieder abfiel auf das 1,6 – 1,7-fache des Ausgangswertes. Der Rückgang an EctC fand keine Entsprechung in der gemessenen Ectoin-Konzentration, welche über einen Zeitraum von 18 Stunden kontinuierlich anstieg. Die maximale Konzentration nach 18 Stunden betrug das ca. 6,3-fache des Ausgangswertes. 17. Wurden H. halophilus Zellen mit anderen Osmolyten außer NaCl geschockt, so ergab sich folgendes Bild der Regulation der Ectoin-Biosynthese: (i) die Transkription der ect-Gene zeigte keine Chlorid-abhängige Regulation. Die maximale Transkriptmenge wurde in Gegenwart von Nitrat erreicht, wohingegen Gluconat zu vergleichbachen mRNA-Mengen führte wie Chlorid. Glutamat führte nur zu schwacher Stimulierung der Transkription. (ii) auf Ebene der Proteinmenge war zu sehen, dass die Menge an EctC nach osmotischem Schock vergleichbar war in Zellen, die mit Chlorid oder Nitrat inkubiert wurden. Gluconat führte nur zu einer 40%-igen Zunahme während andere Osmolyte nahezu wirkungslos auf die Menge an EctC blieben. (iii) die höchste Akkumulation an Ectoin nach einer plötzlichen Erhöhung der Osmolarität wurde erreicht mit Chlorid (6-fache Zunahme) gefolgt von Nitrat (5,6-fache Zunahme). Gluconat führte lediglich zu einer 3,3-fachen und Glutamat nur noch zu einer 2-fachen Steigerung der Ectoinkonzentration. Glutamat hat somit ähnliche Effekte wie Tartrat, Saccharose oder Sulfat. Succinat führte zu keiner Akkumulation und Glycin sogar zu einer deutlichen Abnahme. Die Produktion von Ectoin ist somit hauptsächlich abhängig vom Anion/Osmolyt und nur untergeordnet von der Osmolarität.
The ABC protein ABCE1, also called HP68 or RNase L inhibitor (RLI), is one of the most conserved proteins in evolution. It is universally expressed in eukaryotes and archaea, where ABCE1 is essential for life. ABCE1 plays a crucial role in translation initiation and ribosome biogenesis, however, the molecular mechanism of ABCE1 remains unclear. In addition to two ABC ATPase domains, ABCE1 contains a unique N-terminal region with eight conserved cysteines predicted to coordinate iron-sulfur (Fe-S) clusters. To analyze the function of ABCE1, the hyperthermophilic crenarchaeote Sulfolobus solfataricus was chosen as a model system. S. solfataricus ABCE1 was overexpressed homologously in S. solfataricus and heterologously in E. coli. Noteworthy, for tagged-protein production in S. solfataricus a novel expression system based on a virus shuttle vector was established. This is the first example for a successful overexpression and purification of isolated full-length ABCE1. For the first time it was shown that ABCE1 indeed bears biochemical properties of an ABC protein even though it has unique features. Remarkably, the nucleotide binding domains (NBDs) of ABCE1 bound ATP and AMP, but were functionally non-equivalent in ATP hydrolysis. Mutations of conserved residues in the second NBD led to a hyperactive ATPase, which implies an intramolecular mechanism of dimer formation. Truncation of the Fe-S cluster domains did not influence ATPase activity. The Fe-S clusters of ABCE1 were analyzed by biophysical and biochemical methods. As presented in this study, ABCE1 harbors two essential diamagnetic [4Fe-4S]2+ clusters, one ferredoxin-like cluster formed by cysteines at position 4/5/6/7 and one unique ABCE1 cluster formed by cysteines at position 1/2/3/8. ABCE1 was found to be associated with RNA after purification from S. solfataricus and bound ribosomal RNA in vitro. In addition, ABCE1 showed homo-oligomerization and appeared to form a hexameric complex of ~440 kDa, which was RNase sensitive. Archaeal ABCE1 associated with ribosomes, however, the unique Fe-S clusters of ABCE1 were not required for this interaction. Although archaeal ABCE1 assembled with ribosomes and ribosomal RNA, ABCE1 proved not to be essential for translation in S. solfataricus and did not interact with archaeal initiation factors. Nevertheless, the ABCE1 gene is one of the few genes conserved between archaea and eukaryotes and fulfills a universal task, which needs further characterization.
Two types of proteins transport ions across the membrane – ion channels and ion pumps. Ion pumps transport ions against their electrochemical gradient by co-transporting another ion or a substrate molecule through a concentration gradient or by coupling this process to an energy source like ATP. Those that couple ATP hydrolysis to ion transport are called ion motive ATPases and can be classified as ‘V’, ‘F’ and ‘P’ types. In this thesis, two sub-classes of P-type ATPases, PIIIA and PIB were studied. Attempts were made to over-express and crystallize the plant proton pump AHA2 (a PIIIA-ATPase). Also, the two putative copper transporting ATPases, CtrA3 (CopB-like) and CtrA2 (CopA-like) from Aquifex aeolicus (both PIB pumps) were over-expressed in E. coli and characterized. PIIIA-type pumps transport protons across the membrane and are found exclusively in plants and fungi, and probably some archaea. One of the most characterized proton pump biochemically is the A. thaliana proton pump AHA2. An 8Å projection map of this enzyme is already available (Jahn 2001). PIBATPases, also called CPX type pumps transport heavy metal ions such as Cu+, Cu2+, Zn2+, Pb2+, Cd2+, Co2+ across biological membranes and play an important role in homeostasis and biotolerance of these metals. CopA and CopB are two such proteins that transport copper across cell membrane found in many prokaryotes. CopB-like proteins are found almost exclusively in bacteria, with CPH sequence motif, while CopA-like proteins have CPC sequence motif, also found in eukaryotic copper transporters including human ATP7A and ATP7B. CopB extrudes Cu2+ across the membrane. CopA is activated by and transports Cu+ but the direction of transport is debated. Attempts were made to over-express the plant proton pump AHA2 in yeast Pichia pastoris. However, the yeast expressed only a truncated protein, which could not be used for further studies. It can be concluded that P. pastoris strain SMD1163 is not a good host for expression of AHA2. Focus was then shifted to AHA2 that has been over-expressed and purified from S. cerevisiae strain RS72. Growth and purification protocols had to be changed from published methods because of laboratory constraints and this probably had an effect on the protein produced. The protein purified from S. cerevisiae could not be crystallized reproducibly for structural studies by electron microscopy. CtrA3 was expressed in E. coli and purified using Ni2+-NTA matrix. Like CopB of A. fulgidus (Mana Capelli 2003), it was active only in the presence of Cu2+ and to some extent in Ag+. The protein was maximally active at 75°C, at pH 7 and in presence of cysteine. Lipids were essential for the activity of CtrA3. However, when the protein was purified in Cymal-6, CtrA3 could not hydrolyze ATP, even when lipids were added to the reaction mixture. For reconstitution of CtrA3 into liposomes for 2D crystallization, several lipids were tested. To screen the lipids compatible for protein incorporation, CtrA3 was dialyzed with different lipids at a high lipid-to-protein ratio of 10:1 and centrifuged by sucrose density gradient. Protein incorporated in lipids localized with liposome fraction in the gradient. Most of the CtrA3 was incorporated into DPPC with no aggregation. This lipid was used for reconstitution of CtrA3 at low LPRs, and at an LPR of 0.3-0.5, the protein formed 2D crystals. A NaCl concentration of 50mM was necessary for the formation of crystals. However, salt removal by dialysis prior to harvesting was essential for obtaining wellordered lattices of CtrA3. Addition of preservatives like trehalose and tannin or direct plunging in liquid ethane for cryo-microscopy destroyed the crystal lattice. Similar to CtrA3, the gene responsible for expression of CtrA2 was amplified from genomic DNA of A. aeolicus and expressed in E. coli and purified by Ni2+-NTA. Functional characterization of CtrA2 was done by analyzing ATP hydrolysis activity of the enzyme. Similar to CopA of A. fulgidus (Mandal 2002), CtrA2 was activated in the presence of Ag+ and to some extent, Cu+. It is possible that both the copper ATPases of A. aeolicus have different ion selectivity- CtrA3, specific for Cu2+ and CtrA2, specific for Cu+. Maximal activity of CtrA2 was also at 75°C. Cysteine was essential for activity of CtrA2, but the protein was not dependent on addition of lipids for activation. Reconstitution of CtrA2 was done similar to CtrA3 for screening of lipids for 2D crystallization. Of the lipids tested, DOPC reconstituted the protein best. However, screening at low LPRs did not yield any crystals. Even though both CtrA3 and CtrA2 are similar heavy metal transporting Ptype ATPases from the same organism and have 36% identity, they behaved completely different in their expression levels in E. coli, purification profiles, activity and reconstitution in lipids.