Refine
Year of publication
Document Type
- Doctoral Thesis (32)
Has Fulltext
- yes (32)
Is part of the Bibliography
- no (32) (remove)
Keywords
- RNA (2)
- Azide (1)
- Caenorhabditis elegans (1)
- Detergenz (1)
- Dynamik (1)
- Endothelin (1)
- Endothelin B Rezeptor (1)
- Endothelin Receptor B (1)
- G-Protein gekoppelte Rezeptoren (1)
- G-protein coupled receptor (1)
Institute
- Biochemie und Chemie (32) (remove)
In dieser Arbeit wurden die Strukturen von drei Membranproteinen mittels Einzelpartikel-Kryo‑Elektronenmikroskopie (Kryo‑EM) gelöst. Bei den Membranproteinen handelt es sich um den humanen TRP-Kanal Polycystin‑2, den sekundär-aktiven Transporter BetP aus Corynebacterium glutamicum und den Rotor-Ring der N‑Typ ATPase aus Burkholderia pseudomallei.
Kanäle sind Membranproteine, die Ionen durch eine Pore über die Membran diffundieren lassen. Durch einen präzisen, kanalabhängigen Regulationsmechanismus wird die Pore nur bei Bedarf geöffnet. TRP (transient receptor potential) Kanäle sind anhand von DNA-Sequenzvergleichen identifiziert worden und kommen ausschließlich in Eukaryonten vor. In dieser Arbeit lag der Fokus auf der Strukturbestimmung des humanen TRP Kanals Polycystin‑2 (PC‑2). PC‑2 wurde in einer Studie entdeckt, in der Patienten mit der autosomal dominanten Erbkrankheit „polyzystische Nierenerkrankung“ untersucht wurden. Patienten mit dieser Krankheit tragen eine Mutation in einem der beiden Gene PKD1 oder PKD2, welche für die Proteine Polycystin‑1 und ‑2 kodieren. In dieser Arbeit wurden verschiedene Deletionsmutanten von PC‑2 hergestellt und in das Genom menschlicher HEK293 GnTI‑ Zellen inseriert. Die Zellen, die PC‑2 bzw. die Deletionskonstrukte am stärksten synthetisierten, wurden isoliert und für die rekombinante Proteinherstellung verwendet. Die Expression von PC‑2 führte zu der Entstehung von kristalloidem endoplasmatischem Retikulum. Mutationsstudien in dieser Arbeit zeigen, dass diese morphologische Veränderung durch die Akkumulation von Membranproteinen, die mit sich selbst interagieren, begünstigt wird. Weiter ist es in dieser Arbeit gelungen, PC‑2 zu reinigen und die Struktur des Proteins mit Hilfe von Einzelpartikel Kryo-EM mit einer Auflösung von 4.6 Å zu bestimmen. Die Membrandomäne von PC‑2 ist sehr ähnlich zu den bekannten TRP Kanal Strukturen. Ein Vergleich der PC‑2 Struktur mit dem offenen und geschlossenen TRPV1 Kanal legt nahe, dass PC‑2 in seiner offenen Konformation gelöst wurde.
Der sekundär aktive Transporter BetP von C. glutamicum gehört zu der Familie der BCC- (betaine-carnitine-choline) Transporter und wird durch osmotischen Schock aktiviert. Nach seiner Aktivierung importiert BetP zwei Natriumionen und ein Glycinbetain Molekül. Durch die Akkumulierung von Glycinbetain in der Zelle steigt das osmotische Potential des Zytoplasmas, was den Wasserausstrom aus der Zelle stoppt. Viele Strukturen, die BetP in unterschiedlichen Stadien des Transportprozesses zeigen, konnten bereits mittels Röntgenkristallographie gelöst werden. Allerdings ist die N‑terminale Domäne für die Kristallisation entfernt worden und die C‑terminale Domäne, die komplett aufgelöst ist, ist an einem wichtigen Kristallkontakt beteiligt. Um strukturelle Informationen über die N‑ und C‑terminale Domäne ohne Kristallisationsartefakte zu erhalten, wurde in dieser Arbeit die Struktur von BetP mittels Einzelpartikel Kryo‑EM bestimmt. Die Struktur mit einer Auflösung von 6.8 Å zeigt BetP in einem zum Zytoplasma geöffneten Zustand. Der größte Unterschied zu allen Kristallstrukturen ist die Position der C‑terminalen α‑Helix, die um ~30° rotiert ist und dadurch deutlich enger am Protein zu liegen kommt. Da BetP in Abwesenheit von aktivierenden Stoffen analysiert wurde, wird vermutet, dass es sich bei der gelösten Struktur um den inaktiven Zustand von BetP handelt.
Rotierende ATPasen sind membrangebunden Enzymkomplexe, die bei der zellulären Energieumwandlung eine entscheidende Rolle einnehmen. Sie bestehen aus einem löslichen und einem membrangebundenen Teil. Während in dem löslichen Teil der zelluläre Energieträger Adenosintriphosphat (ATP) entweder synthetisiert oder hydrolysiert wird, baut der membrangebundene Teil entweder einen Ionengradienten auf oder nutzt die Energie eines existierenden Gradienten für die ATP Synthese. Ein wesentlicher Bestandteil des membrangebundenen Teils einer rotierenden ATPase ist der Rotor-Ring. Dieser transportiert Ionen über die Membran und rotiert dabei um seine eigene Achse. In dieser Arbeit wurde eine Studie fortgesetzt, die den Rotor-Ring der N‑Typ ATPase von B. pseudomallei mittels Kryo‑EM untersuchte und zeigte, dass der Rotor-Ring aus 17 identischen Untereinheiten aufgebaut ist. Damit hat die N‑Typ ATPase das größte Ionen-zu-ATP-Verhältnis aller bisher charakterisierten ATPasen. In dieser Arbeit wurde die c17 Stöchiometrie des N‑Typ ATPase Rotor-Rings bestätigt und die Struktur mittels Kryo‑EM bestimmt. Im besonderen Fokus lag dabei der Einfluss von Detergenzien auf die Strukturbestimmung. Es konnte gezeigt werden, dass die beiden Parameter Dichte und Mizellengröße der verwendeten Detergenzien ausschlaggebend für den Erfolg der Strukturbestimmung dieses sehr kleinen Membranproteins sind.
The transporter associated with antigen processing (TAP) is a heterodimeric ATP-binding cassette (ABC) transport complex, which selects peptides for export into the endoplasmic reticulum (ER) and subsequent loading onto major histocompatibility complex class I (MHC I) molecules to trigger adaptive immune responses against virally or malignantly transformed cells. Due to its pivotal role in adaptive immunity, TAP is a target for infectious diseases and malignant disorders, such as bare lymphocyte syndrome type I and cancer. A detailed knowledge about the TAP structure and transport mechanism is fundamental for the development of therapies or drugs against such diseases, but numerous aspects are insufficiently determined to date. The aim of this PhD thesis was to elucidate several structural details of TAP using powerful biochemical and biophysical methods and thereby to contribute to the understanding of the translocation machinery functionality.
High protein yields, an efficient isolation from the lipid environment and subsequent purification of a stoichiometric, stable, and functional TAP complex are prerequisites to get detailed insights into TAP functionality. The natural product digitonin is typically used as detergent to isolate TAP, but suffered from fluctuating purity and high costs. The novel detergent GDN was selected from a number of potential detergents upon their ability to isolate and purify TAP overcoming the limitations of digitonin without compromising on functional integrity. State-of-the-art biophysical techniques, such as solid-state nuclear magnetic resonance (NMR), require highly concentrated protein samples. A new and mild procedure to concentrate TAP was established within this thesis. Freeze drying is superior to conventional concentration techniques, such as ultrafiltration, resulting in TAP inactivation and aggregation already at concentrations of 10 mg/mL. This new procedure enables stabilizing TAP in a condensed glycerol matrix and to concentrate the transport complex up to 30 mg/mL active transporter. The functional integrity of the freeze-dried TAP complex was verified by determining equilibrium dissociation constants, peptide dissociation and ATP-hydrolysis rates as well as long-term stabilities identical to untreated TAP. The combined application of the detergent GDN and the freeze drying procedure facilitates the cost-efficient isolation of functional and highly concentrated TAP and enables to study the structure and mechanism of the peptide transporter TAP using modern analyses methods.
Information on peptide-TAP interactions at atomic level have not been obtained so far. This lack of knowledge hampered the mechanistic understanding of the initial steps of substrate translocation catalyzed by TAP. Dynamic nuclear polarization (DNP) enhanced magic angle spinning (MAS) solid-state NMR on highly concentrated TAP samples prepared with the freeze-drying procedure was used within this thesis to study this challenging membrane protein-substrate complex. The affinity and specificity of peptide binding by TAP are mediated by multiple recognition sites in the N- and C-terminal regions. Side-chains of positions 1, 3, and 9 are most substantially affected upon binding to TAP, revealing recognition principles of the translocation machinery. The nonamer peptide binds to TAP in an extended conformation with an N-to-C terminus distance of ~2.5 nm. Molecular docking revealed that the peptide substrate is locked with its N and C termini between TAP1 and TAP2 and adopts a tilted pose with respect to the membrane plane. The identified contact sites of TAP are consistent with results from earlier crosslinking and mutational analyses on the TAP complex.
The inadequate structure determination and insufficient knowledge about the dynamics of substrate translocation impedes a detailed comprehension of the TAP transport mechanism. Advanced biophysical methods, such as pulsed electron paramagnetic resonance (EPR) or single-molecule Förster resonance energy transfer (FRET), enable to locate the peptide-binding pocket and to elucidate dwell-times, conformational states and dynamics within the translocation cycle of TAP. The specific introduction of spin or fluorescent labels via single cysteines for such studies requires a cysteine-less TAP complex. The endogenous cysteine 213 in TAP2 remained to create a pseudo Cys-less TAP complex within this thesis due to its altered substrate repertoire when mutated to serine as shown in previous studies. Latter complex was used to introduce single-Cys mutations in the cytosolic extensions of transmembrane helices of TAP1. Their functional integrity with respect to peptide binding and translocation was comparable to pseudo Cys-less TAP. All pseudo single cysteines were efficiently labeled, but unintentionally C213TAP2 was labeled as well and TAP concomitantly inactivated. These unsatisfactory initial experiments required the generation of a functional, entirely Cys-less TAP transporter within this thesis. Therefore, C213TAP2 was replaced by all 19 proteinogenic amino acids. All analyzed mutants were capable to bind a high-affinity peptide of TAP, but with varying affinities and binding capacities. The replacement of C213 by isoleucine enabled the generation of a cysteine-less TAP complex with functional characteristics similar to the wild-type transporter and will promote the elucidation of the translocation mechanism of the peptide transporter TAP in future studies using pulsed EPR and single-molecule FRET.
Biological membranes separate the cell interior from the outside and have diverse functions from signal transduction, apoptosis to transportations of ions and small molecules in and out of the cell. Most of these functions are fulfilled by proteins incorporated in the membrane. However, lipids as the main component of membrane not only serve as structural element for bilayer formation but they are also directly involved e.g. signalling processes and bilayer properties are important to mediate protein interactions. To fully understand the role of lipids, it is necessary to develop a molecular understanding of how certain membrane components modify bulk bilayer structure and dynamics. Membranes are known to have many different motions in different conditions and time scales. Temperature, pH, water content and many other conditions change membrane dynamics in a high degree. In addition to this, time scales of motions in membranes vary from ns to ms range corresponding to fast motion and slow motion, respectively. Therefore, membranes are needed to be studied systematically by varying the conditions and using methods to investigate motions in various time scales separately. The aim of this study was therefore perform a combined solid-state NMR / molecular dynamics study on model membranes. Different substrates, such as potential drugs, polarizing agents and signaling lipids were incorporated into bilayers and their location within the membrane and their effect onto the membrane was probed. NSAIDs (non-steroidal anti-inflammatory drugs), pirinixic acid derivatives, ceramides and polarizing agents were the substrates for membranes in this study. There were several experimental methods that were applied in order to investigate effects of these substrates on membrane dynamics. Different kind of phospholipids including POPC, DMPC and DPPC were used. In addition to experimental work, with the information gathered from solid state NMR experiments molecular dynamics simulations were performed to obtain more information about the membranes at the molecular level. As a result, combination of solid-state NMR with molecular dynamics simulations provides very systematic way of investigating membrane dynamics in a large range of time scales.
Pirinixic acid derivatives were special interest of this study because of their activity on peroxisome proliferator-activated receptor (PPAR) as an agonist as well as on enzymes of microsomal prostaglandin E2 synthase-1 (PGE2s) -1 and 5-lipoxygenase (5-LO) as dual inhibitor. Two potent pirinixic acid derivatives, 2-(4-chloro-6-(quinolin-6-ylamino)pyrimidin-2-ylthio)octanoic acid (compound 2) and 2-(4-chloro-6-(quinolin-6-ylamino)pyrimidin-2-ylthio)octanoate (compound 3), have been worked and their insertion depts were investigated by combining of solid state NMR and molecular dynamics simulations. Both experimental and theoretical results pointed out that compound 3 was inserted the phospholipid bilayer more deeply than 2. NSAIDs – lipid mixtures have been also studied here. It is known that consumption of NSAIDs as in mixture with lipids results much fewer side effects than consumption of the drugs alone. Thus, it is crucial to understand interactions of NSAIDs with lipids and investigate the possible complex formation of drugs with lipids. In this study, interactions of three widely used NSAIDs, ibuprofen, diclofenac and piroxicam, with DPPC were investigated by solid-state NMR. 1H and 31P NMR results depicted that ibuprofen and diclofenac had interactions with lipids, which is an indication of drug-lipid complex formation whereas piroxicam didn’t show any interactions with lipids suggesting that no complex formation occurred in the case of piroxicam. Ceramides are known to play key roles in many cell processes and many studies showed that the functions of ceramides are related with the ceramide effects on biological membranes. Therefore, in this study, influences of ceramides on biophysics of lipid bilayers were investigated by using various solid state NMR techniques and molecular dynamics simulations. Results from molecular dynamics simulations clearly showed that ceramide and lipids have strong interactions. More evidences about ceramide-lipid interactions were provided from 1H and 14N NMR results. In addition, it was indicated by both simulation and experimental methods that ceramide increased the rigidity of DMPC by increasing chain order parameters. BTbk is a biradical, which is used as polarizing agent for dynamic nuclear polarization (DNP) experiments and found to be more efficient than other widely used polarizing agents such as TOTAPOL. Since it is a hydrophobic compound, which prefers to stay inside lipid bilayer it is important to investigate the location and orientation of bTbk along the bilayer in order to understand its enhancement profile in DNP measurements. In this study, both NMR relaxation time measurements and molecular dynamics simulations revealed that bTbk tends to stay more close to hydrophobic chain of lipids than the interfacial part of lipids at bilayer surface.
In the first part of this work, a brief introduction on lipid membranes as well as a theoretical summary on both methods of solid-state NMR and molecular dynamics simulations is given. Then, in the second part methodology is introduced for both solid-state NMR spectrometer and theoretical calculations. Afterwards, results of different membrane systems are discussed in the following parts for both solid state NMR and MD. Finally, in the last part, a summary and the conclusion of the overall results together with some future plans are explained.
Infections with multidrug resistant bacterial strains like Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa or Acinetobacter baumanii that can accumulate resistance mechanisms against different groups of drugs cause increasing problems for the health care system. Multidrug efflux pumps are able to transport different classes of substances, providing a basic resistance to different antibiotics. Especially when they are overexpressed they can keep bacterial cells alive under antibiotic pressure unless other high level resistance mechanisms like expression of β-lactamases are established. One example for a clinically relevant multidrug efflux pump is the AcrAB/TolC tripartite system of E. coli, that transports a variety of different substrates, including besides antibiotics dyes, detergents, bile salts and organic compounds from the periplasm or the inner membrane out of the cell. AcrB is the inner membrane component of the protein complex that determines not only the substrate specificity of the tripartite system but energises the transport through the whole system process via proton transduction as well. TolC is the outer membrane spanning protein that forms a pore in the outer membrane enabling the system to transport drugs over the latter out of the cell. The periplasmic membrane fusion protein AcrA connects AcrB and TolC in the periplasm completing the channel from the periplasm, respective the inner membrane to the extracellular space. AcrB assembles as trimers, in asymmetric crystal structures each of the protomers adapts a different conformation designated L(oose), T(ight) and O(pen). In the protomers tunnels open up and collaps in different conformations. In the L protomer a periplasmic cleft opens up that can initially bind substrates to the periplasmic part of AcrB. In the T conformation the deep binding pocket opens that is assumed to bind substrates tightly that were bound to the access pocket before. As well in the T conformation a second pathway leading to the deep binding pocket opens that can guide substrates from a groove between transmembrane helices TM7, TM8 and TM9, the TM8 groove, that is connected with socalled tunnel 1 that ends in the deep binding pocket. In the O conformation a new tunnel opens that connects the collapsing deep binding pocket with the periplasmic space, respective the channel through the periplasmic space formed from AcrA and TolC. Substrates were cocrystallised in access and deep binding pocket verifying their role in substrate transport. In the TM8 groove in high resolution crystal structures DDM molecules were cocrystallised in L and T conformation, indicating that the AcrB substrate DDM may utilise this entrance to the deep binding pocket. The asymmetry observed in the AcrB trimers trongly suggests a peristaltic pump mechanism. The functional rotation cycle demands communication between the subunits and tight control of substrate load of protomers during the transport to optimise the ration between protons that are transduced and substrates transported. Indeed it was shown that AcrB transport mechanism is positively cooperative for some β-lactam substrates. For the communication between the subunits it was assumed that ionic interaction between ion pairs established between charged amino acids at the interfaces of protomers in different conformations are of special importance. Thus the amino acids engaged in ionic interactions, respective ion pairs D73-K131, E130-K110, D174-K110, R168, R259-E734 were substituted with non-charged amino acids pairwise and phenotypes were determined in plate dilution assays and MIC experiments. No evidence for a general, substrate independent, reduction of AcrB activity, that would be expected when the ionic residues are of special importance for AcrB function, could be found with the methods applied. Substitutions were not only combined pairwise according to the putative ion pairs but as well in combinations of R168A with D174N, E130Q and K131M. AcrB activity is reduced for the variant R168A_D174N significantly, activity decreases further for quadruple variant E130Q_K131M_ R168A_D174N. Because the reduced activity is only observed in this combination of substitutions the phenotype must result from accumulation of small effects of the single substitutions. R168A may destabilise the protomer interfaces, as its side chain is oriented in direction to the neighbouring protomer at all interfaces, enhancing substratespecific effects of substitutions E130Q, K131M, D174N that are not in all conformations oriented towards the neighbouring protomer but as well along the substrate transport pathway. Further investigations to figure out the details of the effects observed were not conducted because fluctuating expression of the variants hindered experimental procedures.
In another approach TM8 was in focus of the interest. As mentioned above it is a possible substrate entrance in the inner membrane. The linker between TM8 and the periplasmic PC2 subdomain undergoes a coil-to-helix transition when AcrB cycles through L, T and O conformations. Linking the transmembrane part of AcrB that provides the energy for the transport process via proton transduction with the periplasmic part harbouring the major part of the substrate pathway assignes TM8 and the periplasmic linker (859-876) an important role in the function of AcrB. Thus it was investigated with an alanine-scan of residues 859 to 884 and G/P respective P/G exchange followed by phenotype characterisation in growth curve and plate dilution assays of selected variants. In the phenotype determinations none of the variants, except G861P that seems to cause massive sterical restriction in an α-helical region, displayed a general, substrate independent decrease of AcrB activity. Thus it is concluded that the individual properties of amino acids in TM8 and the periplasmic linker are not of general importance for the mechanism of AcrB. The substitution of individual amino acids had impact on uptake of different substrates in plate dilution assays in a substrate dependent manner. The uptake of some substrates, like erythromycin or chloramphenicol is more affected than that of others with rhodamine 6G resistance being only reduced for the G861P variant. A relation between the PSA of substrates and reduced activity of AcrB was observed. in Substrates with higher PSA values are more affected by substitutions in TM8 or periplasmic linker, resulting in the conclusion that substrates with higher PSA are more likely to be taken up via the TM8 groove/tunnel 1 pathway than those with lower PSA values.
Die Familie der ubiquitären ATP binding cassette (ABC)-Membranproteine katalysiert unter Hydrolyse von ATP die Translokation von Substraten über biologische Membranen. In der hier vorliegenden Arbeit wurde die Struktur und Funktion des osmoprotectant uptake (Opu) Systems A aus B. subtilis untersucht, das aus drei Untereinheiten, der ATPase OpuAA, dem integralen Membranprotein OpuAB und dem Substrat-Bindeprotein OpuAC, besteht und unter hyperosmolaren Bedingungen die kompatiblen Solute Glycin-Betain (GB) und Prolin-Betain (PB) in die Zelle importiert, um eine Plasmolyse zu verhindern. Sämtliche Untereinheiten wurden getrennt oder als OpuAA/AB Komplex in E. coli überproduziert und bis zur Homogenität isoliert. OpuAA zeigte ein dynamisches Monomer-Dimer Gleichgewicht (KD= 6 µM), das durch Nukleotide beeinflusst wurde. Unter Bedingungen hoher Ionenstärke konnten Monomer und Dimer getrennt isoliert und analysiert werden. Die Affinitäten und Stöchiometrien der OpuAA/Nukleotid Komplexe wurden unter Verwendung des fluoreszierenden TNP-ATP bzw. einer Nukleotid-sensitiven Trp-Mutante des OpuAA untersucht. Das Monomer hatte ein Molekül TNP-ATP gebunden, während zwei Moleküle TNP-ATP in dimerem OpuAA detektiert wurden. Die Affinität von Nukleotiden zu OpuAA nahm in folgender Reihe zu: ATP<ATP/Mg2+<ADP/Mg2+. Eine Erhöhung der Ionenstärke bewirkte nicht nur eine Erniedrigung der KD-Werte von OpuAA/Nukleotid Komplexen, sondern auch eine Steigerung der ATPase Aktivität. In 1 M NaCl zeigte das Monomer basale ATPase Aktivität, während das Dimer nur sehr geringe Aktivität hatte, jedoch durch Zugabe von OpuAB und OpuAC aktiviert wurde. K+ wurde als ein Modulator der ATPase Aktivität von OpuAA identifiziert. Die Zugabe von TNP-ADP/Mg2+ induzierte in dimeren OpuAA einen konformellen Wechsel, der zu einem Zerfall des Dimers führte. Monomer und Dimer hatten gegenüber Nukleotiden unterschiedliche Affinitäten, was eine unterschiedliche Architektur der Nukleotid-Bindetasche implizierte. Die Architektur des OpuAA Dimers wurde mittels FRET untersucht. Dazu wurde OpuAA ortspezifisch mit Fluorophoren markiert und ein Verfahren etabliert, in dem die intermolekularen Distanzen des Dimers bestimmt werden konnten. Ein Vergleich der Distanzen mit anderen NBD Dimeren zeigte, dass OpuAA eine zu BtuD oder MalKE. coli vergleichbare Dimer Architektur mit einer head-to-tail Orientierung hat. Die Struktur des OpuAC/GB und OpuAC/PB Komplexes wurde durch Röntgenstrukturanalyse mit einer Auflösung von 2,7 Å bzw. 2,8 Å aufgeklärt und zeigte zwei globuläre Domänen, die über zwei Peptidsegmente miteinander verbunden waren. Die delokalisierte positive Ladung des Liganden war von einem cluster aus drei Trp-Resten, dem sog. "Tryptophan-Prisma", über kationische-p-Interaktion komplexiert. Nach Ligandenbindung wurden beide Domänen durch eine Wasserstoffbrücke zwischen den konservierten Asp22 und Trp178 überbrückt. Dieser molekulare Schalter wurde von OpuAC genutzt, um Affinitäten von GB und PB zu regulieren.
Die Tumorprotein-Familie des Proteins p53 besteht aus drei Familienmitgliedern p53, p63 und p73 mit diversen Funktionen als Transkriptionsfaktoren. p53 war das erste Mitglied dieser Familie, das im Jahre 1979 entdeckt wurde und wurde zunächst als krebsverursachendes Protein eingeordnet, weil es in vielen Tumorgeweben in erhöhter Menge vorgefunden wurde. Es wurde allerdings festgestellt, dass der Großteil dieser gefundenen p53-Proteine funktionsunfähig durch Mutationen in ihrer Aminosäuresequenz waren. Unmutiertes p53 hingegen führt zu einem Stopp von Zellteilung oder sogar Zelltod, sofern die Zellen genetischem Stress durch Strahlung oder mutagene Chemikalien ausgesetzt sind. Heute wird p53 als eines der wichtigsten Tumor-Unterdrückungsproteine betrachtet. Die beiden anderen Familienmitglieder p63 und p73 existieren in einer Vielzahl von Isoformen. Neben carboxyterminaler alternativer mRNA-Prozessierung (α, β, γ, usw. Isoformen) führen zwei unabhängige Promotoren auch zu zwei unterschiedlichen Aminotermini. Hier wird zwischen ΔN- und TA-Isoformen unterschieden. Im Falle von p63 treten zwei dominante Isoformen auf, ΔNp63α und TAp63α. Während ΔNp63α eine Rolle in der Differenzierung von Haut spielt, wurde TAp63α bisher ausschließlich in Eizellen gefunden. Dort hat es die Funktion eines Sensors, der die genetische Integrität der weiblichen Keimbahn sicherstellt. Es liegt in Eizellen in hoher Konzentration vor, allerdings in einer komplett inaktiven Form. Werden Schäden im der Erbgut der Eizelle festgestellt, so wird das Protein aktiviert und kann so den Prozess des Zelltods der Eizelle einleiten. Mutationen oder das Fehlen des p63-Genes führen zu Missbildungen während der Entwicklung und zu unvollständig ausgebildeter Haut. Im Falle von p73 gibt es ebenfalls mehrere Isoformen, wobei die Funktionen und Relevanzen der einzelnen Isoformen bisher nicht komplett geklärt werden konnten. Eine p73-negative Maus hat einen diffusen Phänotyp, der sich durch niedrige Intelligenz, fast sterile Männchen und chronische bronchiale Infektion auszeichnet. Generell sind alle Mitglieder der p53-Familie tetramere Proteine und sind nur in diesem Zustand auch aktiv. Die einzige Ausnahme stellt, wie oben beschrieben, TAp63α dar, das in einem inaktiven dimeren Zustand vorliegt und nur durch Modifikation durch zwei unabhängige Kinasen aktiviert werden kann. Dabei geht es in den tetrameren Zustand über und ist daraufhin aktiv.
Alle drei Proteine haben (anhand ihrer längsten Isoform beschrieben) eine konservierte Domänenstruktur. Am Aminoterminus befindet sich zunächst die transaktivierende-Domäne (TAD), die für Interaktionen mit transkriptionellen Koaktivatioren relevant ist. Danach folgt die stark konservierte Desoxyribonukleinsäure (DNA) bindende Domäne (DBD). Sie stellt sicher, dass der Transkriptionsfaktor sequenzspezifisch an der richtigen Stelle auf die DNA bindet. Weitergehend folgt die Tetramerisierungsdomäne (TD), welche den oligomeren Zustand des Proteins herstellt. Im Falle von p53 endet das Protein an dieser Stelle, bei p63 und p73 folgen noch das Sterile-Alpha-Motiv (SAM) und die Transkription-inhibierende Domäne (TID). Die SAM Domäne wird generell als Interaktionsdomäne beschrieben, es konnte allerdings bis dato kein Interaktionspartner gefunden werden. Die TID hat einen negativen Einfluss auf die transkriptionelle Aktivität der Proteine. Im Falle von TAp63α interagiert sie zusätzlich mit der TAD um den Dimeren Zustand zu stabilisieren.
Histon Acetylasen
Die Acetylierung von Histonen ist neben deren Methylierung die wichtigste Modifikation. Sie ist essenziell für die Transkription innerhalb aller eukaryontischen Lebewesen, da sie durch die Modifikation von Histonen die DNA für die DNA-Polymerase II zugänglich macht. Es gibt insgesamt fünf verschiedene, nicht näher miteinander verwandte Familien von Histonacetylasen. Diese Studie beschäftigt sich ausschließlich mit der KAT3 Familie, bestehend aus den Proteinen p300 und CBP. Beide sind hochgradig konserviert, in gefalteten Bereichen der Proteine erreicht die Sequenzidentität fast 100%. Beide Proteine scheinen sehr ähnliche Aufgaben zu erfüllen, die jedoch nicht komplett identisch sind. Die Fehlfunktion von einem Allel von CBP führt zum Krankheitsbild des Rubinstein-Taybi-Syndrom (RTS), während ein Mangel an p300 sich in Mäusen auf das Gedächtnis auswirkt. Der komplette Verlust beider Allele eines der Proteine ist immer tödlich, genauso wie auch Verlust jeweils eines Allels bei beiden Proteinen. Insgesamt vier unabhängige Domänen in p300/CBP sind in der Lange die transaktivierende Domänen der p53-Familie zu binden. Bei zwei der Domänen handelt es sich um Zinkfinger-Proteine (Taz1 und Taz2), die anderen beiden sind kleine, ausschließlich α-helikale Domänen (Kix und IBiD).
Diese Studie beschäftigt sich mit der Lösung von Strukturen von der transaktivierenden Domäne von p63 und p73 mit der p300-Domäne Taz2. Außerdem wurden die Auswirkungen von direkten Acetylierungen von TAp63α charakterisiert und der Effekt von einem potenten p300/CBP Inhibitor auf Oozyten unter genotoxischem Stress analysiert. Zusätzlich wurde die Phosphorylierungskinetiken von Tap63α wärend der Aktivierung durch Kinasen untersucht.
...
The transporter associated with antigen processing-like (TAPL) acts as a lysosomal ATP-dependent polypeptide transporter with broad length selectivity. To characterize in detail its substrate specificity, a procedure for solubilization, purification and functional reconstitution of human TAPL was developed. TAPL was expressed in Sf9 insect cells with the baculovirus expression system and solubilized from crude membranes. By intensive screening of detergents, the mild non-ionic detergents digitonin and dodecylmaltoside were found to be ideal for solubilization with respect to efficiency, long term stability, and functionality of TAPL. TAPL was isolated in a two-step procedure with a yield of 500 micro g/L cell culture and, subsequently, reconstituted into proteoliposomes. The KM(pep) for the peptide RRYCfKSTEL (f refers to fluorescence label) and KM(ATP) were determined to be 10.5 ± 2.3 micro M and 97.6 ± 27.5 micro M, respectively, which are in the same range as the Michaelis-Menten constants determined in the membranes. The peptide transport activity of the reconstituted TAPL strongly depends on the lipid composition. Interestingly, the E. coli lipids are prefered over other tested natural lipids extracts. Moreover, phosphatidylcholine, the most abundant phospholipid in eukaryotic cells influenced TAPL activity in a dose dependent manner. In addition, some negatively charged lipids like DOPA and DOPS increased peptide transport activity with preference for DOPS. However, DOPE or egg PG which are also negatively charged had no effect. It seems not only the charge but also the specific head group of phospholipids that has impact on the function of TAPL. With the help of combinatorial peptide libraries containing D-amino acid residues at defined positions as well as bulky fluorescein labeled peptides, the key positions of the peptides were localized to the N- and C-terminal residues with respect to peptide transport. The C-terminal position has the strongest selectivity since modification at this position shows strongest impact on peptide transport. Additionally, positions 2 and 3 of the peptide also have weak influence on peptide selectivity. Subsequently, the residue preferences at the key positions were systematically investigated by combinatorial peptide libraries with defined residues at certain positions. At both ends, TAPL favors positively charged, aromatic, or hydrophobic residues and disfavors negatively charged residues as well as asparagine and methionine. The residue preferences at the key positions are valid for peptide substrates with different length, indicating a general rule for TAPL selectivity. Besides specific interactions of both terminal residues, electrostatic interactions are important, since peptides with positive net charge are more efficiently transported than negatively charged ones. By size exclusion chromatography (SEC) and blue native PAGE, TAPL purified in the presence of digitonin or dodecylmaltoside had an apparent molecular weight of 200 kDa which is close to the theoretical molecular mass of the TAPL homodimer (172 kDa). The purified and reconstituted TAPL showed specific ATP hydrolysis activity which can be inhibited by orthovanadate. TAPL in proteoliposomes showed 6-fold higher ATP hydrolysis than digitonin solubilized protein, indicating the phospholipids impact on TAPL function. However, no peptide substrate stimulated ATPase activity was observed. For site-specific labeling of TAPL, eight cysteines in each half transporter were replaced by alanine or valine. The TAPL cys-less mutant showed the same peptide transport activity as TAPL wt. Based on the functional TAPL cys-less mutant, seven single cysteine mutants were introduced into strategic positions. All single cysteine mutants in the TMD did not influence peptide transport, whereas the mutant L701C, which is close to the conserved H-loop motif, displayed impaired transport. TAPL orthologs Haf-4 and Haf-9 from Caenorhabditis elegans possess around 40% sequence identities with TAPL and 50% with each other. Both proteins are putative half transporters and reported to be involved in the intestinal granule formation (Bauer, 2006; Kawai et al., 2009). To further understand the physiological functions of these two proteins, they were expressed in Sf9 insect cells. Haf-4 and Haf-9 showed weak but specific ATP- and peptide-dependent peptide transport activity for the given peptide RRYCfKSTEL. Therefore, it was proposed that the physiological roles for Haf-4 and Haf-9 might be related to their peptide transport activity. Besides forming functional homodimeric complex as estimated by the peptide transport activities, both half transporter could also form heteromers which was confirmed by coimmunoprecipitation. However, the heteromers showed decreased transport activity.
In this thesis the integral membrane protein diacylglycerol kinase (DAGK) from E.coli is investigated with solid-state NMR. The aim is to gain an insight into the enzyme’s mechanism through integration of kinetic, structural and dynamic data. The biological function of DAGK is the transfer of the γ-phosphate group from Mg*ATP to diacylglycerol (DAG) building phosphatidic acid (PA)[6] as port of the membrane-derived oligosaccharide cycle[31,34]. Surprisingly, DAGK does not share structural or sequential similarities with other kinases[12]. Typical sequence motives found in other kinases, which catalyze phosphoryl transfer reactions, are not found[13]. In its physiological form DAGK is a homo-trimer with nine transmembrane helices, three catalytic centers and a size of 39.6 kDa.
First, the set-up of a real-time 31P MAS NMR experiment is shown. This experiment allows measuring in real-time the simultaneous ATP hydrolysis in the aqueous phase and lipid substrate phos-phorylation in the membrane phase with atomic resolution under magic angle spinning[56]. After fast transfer of the sample into the NMR spectrometer the enzymatic reaction is started with a temperature jump. This approach of real-time MAS NMR in a dual-phase system was demonstrated for the lipid substrate analogs dioleoyl- (DOG) and dibutyrylglycerol (DBG), with a C8 and C4 aliphatic chain, respectively. The combination of 31P direct and cross polarization functions as a dynamic filter. In the 31P direct polarized experiment nuclei in both phases are detected, while in the 31P cross polar-ized experiment, only nuclei in the membrane phase are detected. Rates for substrate turnover, i.e. degradation of γP-, βP, αP-ATP and build-up of βP-, αP-ADP, free phosphate as side reaction, and PA are obtained, which reveal a Michaelis-Menten behavior with regard to Mg*ATP and DBG. Here Mg*ATP and DBG follow a random-equilibrium model, where every substrate can bind indepen-dently from the other substrate. Analyses of the peak integrals from educts and products of the enzymatic reaction, revealed the stoichiometry of the reaction: 1.5 ATP molecules are used to phos-phorylate one DBG molecule. The excess of ATP is attributed to the basal ATPase activity. Further-more, experiments with ATPγS, usually regarded as a non-hydrolysable ATP-analog, where carried out. Surprisingly, DAGK hydrolyzes ATPγS and also transfers the thio-phosphate group to the lipid acceptor DBG, which points to a certain degree of plasticity in the active center. A phosphorylated enzyme intermediate was not detected. These results suggest the building of a ternary complex of Mg*ATP, DBG and DAGK performing a direct-phosphoryl transfer reaction, without passing through a phosphorylated enzyme intermediate. Experiments with the transition state analog ortho-vanadate (Vi) showed a decoupling of the ATP hydrolysis activity from lipid substrate phosphorylation. This indicates a specific transfer site for the γ-phosphate group from ATP to DAG, which can be blocked by Vi.
A general disadvantage of NMR spectroscopy compared to other spectroscopic methods is its inherent low sensitivity. One possible starting point for the improvement of signal-to-noise per unit time is the reduction of the spin-lattice relaxation time of protons[209]. Usually 95 % of the experi-mental time is required for the relaxation of the 1H to equilibrium. The addition of paramagnetic species can be used to reduce the 1H T1[233]. In a comprehensive study four different paramagnetic agents were tested: Cu2+-EDTA, Cu2+-EDTA-tag, Gd3+-TTAHA and Gd3+-DOTA. The titration of these paramagnetic complexes showed the principle feasibility of this approach, but differences between the tested species exist. The most promising complex is Gd3+-DOTA which, at a concentration of 2 mM, causes a 10-time improvement of signal-to-noise ratio per unit time. This allowed measuring 2D 13C-13C correlation spectra of proteoliposomes in one tenth of the usual required experimental time (i.e. 10 hours vs. 4 days) with good signal-to-noise.
For the investigation of structural or dynamic changes in the protein upon substrate interaction with MAS NMR, the spectral properties CP efficiency and resolution of the DAGK in liposomes needed to be improved. The most critical step during sample preparation is the reconstitution of the membrane protein from detergent micelles into a membrane of synthetic lipids under detergent removal. For this procedure the important criteria are enzymatic activity, measured in a coupled ATPase assay[55], and homogeneity of the proteoliposomes, which was tested e.g. on a discontinuous sucrose step gradient. Therefore an extensive study was carried out, in which different detergents, lipids and lipid mixtures, techniques for detergent removal and different protein-to-lipid ratios were tested. A direct correlation between high ATPase activity and good resolution was not found. Moreover, active DAGK in a mixture of DMPC and cholesterol, which emulates the membrane features of a membrane containing DAG, showed the best CP efficiency and resolution.
The assignment of the protein backbone and amino acid side chains the first mandatory step towards the investigation of structural and dynamical features influencing and defining the enzymatic mechanism by MAS NMR. As the assignment procedure is very time consuming for a total protein, a special labeling scheme for DAGK was developed, which allows assigning most of the protein areas presumably involved in enzyme catalysis. The assignment of DAGK with solution NMR[132] was not transferable to the MAS NMR spectra. Most important for the assignment process were the unique pairs[335], two consecutive amino acids which only appear once in the amino acid sequence. These unique pairs served as anchor points. Five different multinuclear MAS NMR experiments (DARR, NCO, NCA, NCACX, NCOCX) were required for the sequential assignment. It was possible to assign 35 % of the total amino acid sequence with one sample and 8 experiments acquired at 850 MHz. The secondary structure analysis showed subtle differences to the DAGK assignment with solution NMR[132], which can be attributed to the different environment in lipid bilayers and detergent micelles.
Data about structural and dynamical changes under substrate interaction can reveal details about the enzymatic mechanism. Therefore changes in chemical shift in 2D heteronuclear correlation experiments in the apo-state and under substrate saturated conditions with the substrates Mg*AMP-PNP, a non-hydrolysable ATP-analog, DOG, a mixture of Mg*AMP-PNP and DOG as well as inhibited by Vi were recorded. The most significant peak changes were observed at the interface membrane-cytoplasm as well as the the N-terminal amphipathic helix. The residues revealing chemical shift perturbations correlate with conserved residues or such residues, for which importance for catalysis and/or folding could be shown in mutation studies[8]. Especially noticeable were the changes at the amino acids Asn 72, Lys 64, His 87, Tyr 86 and Asp 95.
Beside changes of the chemical shift, changes of line width or signal doubling were observable. These changes can point to a correlation with dynamic reorientations in the μs-ms time regime, which are most relevant for enzymatic processes. The protein backbone dynamics in the apo-state as well as saturated with the substrates or inhibited with Vi were investigated with a 15N-CODEX experiment, which is based on the reorientation of the CSA tensor upon dynamical changes[350]. Specific effects of the different substrates or analogs on the protein backbone dynamic were revealed complementing the structural data and the chemical shift perturbation experiments.
Die Untersuchung von RNA mittels NMR-Spektroskopie hat in den letzten Jahren an Bedeutung gewonnen, weil die Zahl der neu entdeckten RNA-Funktionen, wie z.B. RNA-Schalter in Bakterien, stark gestiegen ist. Ziel dieser Arbeit war es, mithilfe der NMR-Spektroskopie einen Beitrag zum besseren Verständnis der biochemischen Prozesse, in die RNA-Moleküle involviert sein können, zu leisten.
Im ersten Teil dieser Arbeit (Kapitel 2, 3 und 4) werden zum einen die Entwicklung neuer Methoden für die RNA-Strukturbestimmung vorgestellt und zum anderen die Leistungsfähigkeit der modernen NMR-spektroskopischen Strukturaufklärung demonstriert.
Im zweiten Teil dieser Arbeit (Kapitel 5) wird die NMR-Spektroskopie zur Untersuchung der RNA-Schalter-Funktion eingesetzt. Die biologische Funktion von RNA oder Proteinen setzt oftmals eine dynamische Struktur voraus und involviert Konformationsänderungen infolge biochemischer Signalweiterleitung. Für die Charakterisierung solcher Prozesse eignet sich die NMR-Spektroskopie insbesondere gut, weil sie in Lösung unter verschiedenen Reaktionsbedingungen angewandt wer-den kann. Durch den direkten NMR-spektroskopischen Nachweis von Basenpaarungen können wichtige strukturelle Eigenschaften (Faltung, Strukturhomogenität und Dynamik) entschlüsselt und in einen Zusammenhang mit der Funktion gebracht werden.
Im Folgenden werden die einzelnen Kapitel vorgestellt.
Nachdem das erste Kapitel eine allgemeine Einleitung in die NMR-Spektroskopie, RNA-Struktur und Funktion der RNA-Schalter darstellt, folgt im Kapitel 2 die Einführung einer neuen Methode, die eine quantitative Bestimmung der Torsionswinkel alpha und zeta in RNA/DNA mittels NMR-Spektroskopie ermöglicht (Abb. 1). Sie basiert auf der Wechselwirkung zwischen dem CH-Dipol und der 31P-CSA, die von der relativen Orientierung abhängig ist. Die Methode wurde für die CH- und CH2-Gruppen in Form von zwei Pulssequenzen (2D- und 3D-G-HCP) zur Messung von insgesamt fünf kreuz-korrelierten Relaxationsraten entlang des RNA/DNA-Rückgrats optimiert. Die Funktionsfähigkeit der Methode wurde zunächst an der 14mer cUUCGg-Tetraloop RNA getestet und zur Bestimmung der Torsionswinkel alpha und zeta genutzt. Die Ergebnisse flossen in die Strukturrechnung der 14mer RNA, die im Kapitel 3 vorgestellt wird, mit ein. Des Weiteren gelang es die Anwendbarkeit der Experimente an einer größeren 27mer RNA zu demonstrieren. Die neue Methode ist deswegen von Bedeutung, weil die Winkel alpha und zeta nicht über 3J-Kopplungskonstanten gemessen werden können.
(Nozinovic, S., Richter, C., Rinnenthal, J., Fürtig, B., Duchardt-Ferner, E., Weigand, J. E., Schwalbe, H. (2010), J. Am. Chem. Soc. 132, 10318-10329.)
Im Kapitel 3 wird die NMR-spektroskopische Bestimmung der Struktur einer Model-RNA, der 14mer cUUCGg-Tetraloop RNA, vorgestellt. Die Strukturrechung wurde mit verschiedenen NMR-Datensätzen, die in der Arbeitsgruppe einschließlich dieser Doktorarbeit gesammelt wurden, durchgeführt. Zusammen mit den Ergebnissen aus dem Kapitel 2 konnte eine sehr präzise Struktur mit einem RMSD von 0,37 Å (20 Strukturen) in sehr guter Übereinstimmung mit experimentellen Daten ermittelt werden. Die gerechnete Struktur repräsentiert eine der gegenwärtig genauesten und umfassendsten Strukturbestimmungen einer RNA, bei der jeder Torsionswinkel quantitativ bestimmt wurde. Einen besonderen Höhepunkt stellt die strukturelle Analyse der 2’OH-Gruppen dar, die im anschließenden Kapitel 4 weiter vertieft wurde.
(Nozinovic, S., Fürtig, B., Jonker, H. R. A., Richter, C., Schwalbe, H. (2010), Nucleic Acids Res. 38, 683-694)
Über Jahre war bekannt, dass die Größe der 1J(C1’,H1’)- und 1J(C2’,H2’)-Kopplungskonstanten innerhalb der Ribonukleotide von der lokalen Struktur des Zuckers und der Orientierung der Nukleobase beeinflusst wird. In dieser Arbeit (Kapitel 4) wurde zum ersten Mal ein systematischer Vergleich zwischen NMR-Messungen und DFT-Rechnungen durchgeführt, der eine eindeutige Zuordnung der Hauptkonformationen des Zuckers (C3’- oder C2’-endo) und der Nukleobase (anti oder syn) anhand der 1J(C,H)-Kopplungskonstanten erlaubt. Die beschriebene Methode wurde an einer größeren 27mer RNA erfolgreich erprobt. Weiterhin wurde erstmalig entdeckt, dass zudem die Orientierung der 2’OH-Gruppe einen signifikanten Einfluss auf die 1J(C,H)-Kopplungen hat (Abb. 3). Mithilfe von NMR-Messungen und DFT-Rechnungen konnte aus 1J(C,H)-Kopplungskonstanten die Orientierung von allen 2’OH-Gruppen in der 14mer cUUCGg-Tetraloop RNA bestimmt werden. Die Methode hat den großen Vorteil, dass 2’OH-Gruppen, die aufgrund des schnellen Austauschs mit Wasser oder D2O keine NMR-Signale liefern, analysiert werden kön-nen.
(Nozinovic, S., Gupta, P., Fürtig, B., Richter, C., Tüllmann, S., Duchardt-Ferner, E., Holthausen, M. C., Schwalbe, H. (2011), Angew. Chem. Int. Ed. 50, 5397-5400)
Im Kapitel 5 wird eine NMR-spektroskopische Untersuchung an der Aptamerdomäne des Adenin-bindenden RNA-Schalters (pbuE) vorgestellt. Im Fokus der Forschung stand die Frage: Welchen Einfluss hat die Länge der P1-Helix auf die Struktur und die Ligandbindung der freien Aptamer-domäne?
Durch den Vergleich von zwei Konstrukten mit unterschiedlich langer P1-Helix war es möglich, intrinsische Scherkräfte, die durch die Ausbildung der P1-Helix in der freien Aptamerdomäne entstehen, festzustellen. Es hat sich im Konstrukt mit der verlängerten P1-Helix gezeigt, dass diese zur Destabilisierung der P3-Helix und des Schlaufenkontakts führen. Diese strukturellen Änderungen haben außerdem zur Folge, dass die Bindungsstärke des Liganden reduziert wird. Die Ergebnisse zeigen, dass ein strukturelles Gleichgewicht zwischen Sekundärstrukturelementen die tertiäre Faltung beeinflusst und die Funktion moduliert.
(Nozinovic, S., Reining, A., Noeske, J., Wöhnert, J., Schwalbe, H. (2011), in Vorbereitung)
G protein coupled receptors (GPCRs) constitute the largest family of cell-surface receptors in mammals and are key players in signal transduction. By responding to a plethora of extracellular stimuli ranging from photons to amines to fatty acids to peptides and proteins, these receptors trigger intracellular signalling cascades and regulate a variety of cellular responses. Approximately 800 genes in humans encode GPCRs which are classified according to sequence conservation into rhodopsin-like, glutamate, adhesion, frizzled/taste2 and secretin receptors. GPCRs share a seven transmembrane domain fold undergoing a conformational change upon ligand binding which is translated to the intracellular surface of the receptor thereby allowing a heterotrimeric G protein to couple. Heterotrimeric G proteins consist of a Ga, Gb and Gg subunit and dissociate into their Ga and Gbg entities upon activation by a GPCR. Subsequently, distinct signalling cascades are triggered by each G protein protomer.
Membrane proteins and GPCRs in particular, are highly important targets in drug design and development as currently approximately 60% of all marketed drugs target membrane proteins. Although these classes of proteins are of high therapeutic interest, our understanding of their mechanism of action and structure remains limited. The first structure of a human GPCR was determined in 2007 and required the development of protein engineering and innovative crystallisation techniques. Since then, approximately 130 GPCR structures of less than 40 individual receptors have been determined providing insights into the structural arrangement of the transmembrane helices, ligand binding pockets and G protein interactions. Combined with spectroscopic methods, these studies allowed a more detailed understanding of the molecular aspects of GPCR activation and signalling. Despite the tremendous advances in GPCR structural biology, certain aspects of GPCR function still remain poorly understood. Due to their size and inherent flexibility, the interaction of protein and peptide ligands with their receptors remains a challenging aspect in the structural characterisation of GPCRs. Moreover, structural information on subtype selectivity of peptide ligands continues to be scarce. To contribute functional and structural information on the molecular mechanisms of peptide interactions with GPCRs, this thesis focused on characterising receptors from the chemoattractant cluster using radioligand binding assays as well as NMR spectroscopy.
The chemoattractant cluster mainly groups the kinin, angiotensin, anaphylatoxin chemotactic complement and apelin receptors according to conserved residues in their ligand binding cavities. All receptors in this cluster bind to peptide ligands deriving from high molecular weight protein precursors upon proteolytic processing. Comparable to the conserved binding pocket of the chemoattractant receptors, the peptide ligands display a certain sequence conservation although they differ strongly in size. The largest ligands used in this thesis are the anaphylatoxins complement 3a and 5a, comprising 77 or 74 residues, respectively. Due to their size and complex fold involving three intramolecular disulphide bonds, solid phase synthesis is impossible, which prompted us to develop a modified cell-free expression system to produce these ligands in tritiated form for subsequent functional characterisation of the complement receptors. To demonstrate the versatility of the developed system, it was applied to another disulphidebond containing peptide ligand, the 21 amino acid endothelin-1. We describe a reliable and multifaceted tool to generate custom labelled peptide ligands for the structural and functional characterisation of GPCRs. The system allows the production of custom radioligands, peptides labelled for NMR studies or with fluorescent amino acids.
Apart from the modulation of GPCR activity by orthosteric ligands, GPCR signalling has long been described to be regulated by allosteric ligands including peptides, small molecules and ions. In this thesis, the influence of sodium ions on the activity state of the chemoattractant cluster receptors and in particular on the apelin, bradykinin 2 and angiotensin II type 1 receptors was examined. In recent high resolution crystal structures an allosteric sodium ion pocket beneath the orthosteric ligand binding cavity was identified and residues contributing to the coordination of sodium ions are conserved throughout the chemoattractant cluster receptors. This allosteric sodium ion coordinated within the transmembrane domain bundle has been described to negatively influence the affinity of agonists but not of antagonists. It was found that sodium ions have distinct influences on the affinity state as well as the available number of binding sites of the chemoattractant receptors. In case of the apelin and bradykinin 2 receptors, sodium ions drastically reduced the number of available binding sites whereas the affinity of peptide ligands to the bradykinin 2 receptors remained constant and the ligand binding affinities to the apelin receptor were completely abolished. In contrast, the angiotensin II type 1 receptor affinity state towards the endogenous peptide ligand angiotensin II is highly dependent on the presence of sodium ions, whereas binding of the synthetic peptide antagonist Sar1-Ile8-angiotensin II remained unaffected by the sodium ion concentration. As differential effects irrespective of the efficacy class but dependent on the amino acid composition of the applied ligands are observed, it can be concluded that electrostatic interactions between charged residues of the peptide ligands and amino acids on the extracellular surface of the receptors are influenced by sodium ions thereby adding another layer of complexity on GPCR signalling.
To elucidate the structure-function relationship of ligand selectivity between the kinin receptors, the structure of desArg10-kallidin (DAK) bound to the bradykinin 1 receptor was determined using solid state NMR (SSNMR) in the course of this thesis. The kinin peptides DAK and bradykinin bind with high affinity and high selectivity to either the bradykinin 1 or bradykinin 2 receptor, respectively. The binding pockets of the receptors are highly conserved and the two peptide ligands only differ in one amino acid at their N- and C-termini whereas the remaining eight amino acids are fully conserved. DAK adopts a U-shaped structure when bound to the bradykinin 1 receptor which resembles a horse shoe-like conformation. Using 2D TEDOR spectroscopy it could furthermore be demonstrated that positively charged residues at the N-terminal part of the peptide engage in ionic interactions with negatively charged amino acids on the extracellular surface of the bradykinin 1 receptor. In contrast, bradykinin displays a distinct b-turn at the C-terminus and an S-shaped conformation of the N-terminal segment when bound to the bradykinin 2 receptor. By using SSNMR to study the binding mode of DAK on the bradykinin 1 receptor we could determine that subtype selectivity between the kinin receptors is conferred by distinct conformational restraints within the peptide ligands and by the formation of specific ionic interaction between charged residues on the peptide and receptor, respectively.
In brief, this thesis contributes structural and functional data on the binding mechanisms and binding mode of different peptide-ligand GPCRs helping to understand subtype selectivity and allosteric modulation of the chemoattractant cluster receptors. In addition, a versatile cell-free expression system was developed that allows the custom synthesis of isotopically labelled peptides containing disulphide bonds for the functional characterisation of GPCRs.
Transport processes across the membrane are essential to ensure survival of every living cell. Therefore, the exchange of membrane impermeable molecules is mediated by specific transport proteins, which are embedded in the lipid bilayer.
One important class comprises secondary active transporters, which couple very efficiently the uphill transport of the main substrate against its concentration gradient to the downhill transport of an additional substrate. These transporters are widely distributed among all kingdoms of life and accomplish many crucial functions. One function is to counteract the deleterious effect of hyperosmotic stress in bacteria. Several members of the BCCT (betaine-choline-carnitinetransport) family of secondary transporters mediate osmostress protection by the accumulation of the compatible solute betaine or its precursor choline (Lamark et al., 1991; Peter et al., 1996; Ziegler et al., 2010). Besides osmo-dependent sodium or proton-coupled symporters, the BCCT family includes few rare representatives of osmo-independent transporters such as the substrate:product antiporter CaiT from E. coli (Jung et al., 2002; Ziegler et al., 2010).
The best-characterized member of the BCCT family is the sodium-coupled betaine transporter BetP from Corynebacterium glutamicum. BetP together with the ABCtransporter OpuA and the H+-solute symporter ProP, became a paradigm for osmoregulated osmolyte transport. Although, all three transporters were extensively studied, the general mechanism of osmoregulation is still far from being understood. Thus, one task of this thesis was to elucidate further the regulatory properties of BetP.
BetP is tightly regulated by osmotic stress and is able to increase its basal betaine uptake activity dramatically upon elevated osmolalities within one second (Peter et al., 1998a). The osmotic stress is sensed by BetP via two stimuli, one is the increase of the internal K+ concentration above a threshold of 220 mM (Rübenhagen et al., 2001), the second is related to a change in the physical state of the membrane (Maximov et al., 2014). So far, several solved crystal structures in combination with functional and computational analysis provided insights into the coupling mechanism of betaine and its co-substrate sodium (Khafizov et al., 2012; Perez et al., 2012). Despite the wealth of data, the precise regulatory mechanism of trimeric BetP is still unclear.
The knowledge of three-dimensional structures of biomolecules is fundamental for the understanding of their function. Nuclear magnetic resonance (NMR) spectroscopy represents besides X-ray crystallography one of the two most widely used techniques to study macromolecules at atomic resolution. Its application has long been a laborious task that could take months and required the expertise of an experienced scientist, however, owing to the tremendous effort that has been put into the development of respective computer algorithms, structure determination by NMR spectroscopy of small- to medium sized proteins is nowadays routinely performed. CYANA is one widely used software package, which combines the majority of individual steps towards a three-dimensional structure. The most common application of the program, however, restricts to the combined automated NOE assignment and structure calculation based on NOESY peak lists and an existing chemical shift assignment. Completely automated structure determination starting from NMR spectra is to date technically possible with CYANA, however, not yet routinely applied. In order to achieve this long-term goal, the individual steps need to become more robust with regard to data imperfections such as peak overlap, spectral artifacts or a limited amount of NMR data. The work presented in this thesis should be placed within the context of increasing the reliability and improving the accuracy of structures determined by CYANA on the basis of solution- as well as solid-state NMR data.
The chapter “Systematic evaluation of combined automated NOE assignment and structure calculation with CYANA” comprises an extensive study on the robustness of the combined automated NOE assignment and structure calculation algorithm based on experimental solution NMR data sets that were modified in multiple ways to mimic different kinds of data imperfections. The results show that the algorithm is remarkably robust with regard to imperfections of the NOESY peak lists and the chemical shift tolerances but susceptible to lacking or erroneous resonance assignments, in particular for nuclei that are involved in many NOESY cross peaks.
In the chapter “Peakmatch – A simple and robust tool for peaklist matching” a method to achieve self-consistency of the chemical shift referencing among a set of peak lists is presented. The Peakmatch algorithm matches a set of peak lists to a specified reference peak list, neither of which have to be assigned, by optimizing an assignment-free match-score function. The algorithm has been extensively tested on the basis of experimental NMR data sets of five different proteins. The results show that peak lists from many different types of spectra can be matched reliably as long as they contain at least two corresponding dimensions.
NMR structures are represented by bundles of conformers whose spread indicates the precision of the atomic coordinates. However, there is as yet no reliable measure of structural accuracy, i.e. how close NMR conformers are to the “true” structure. Instead, the precision of structure bundles is widely (mis)interpreted as a measure of structural quality. Attempts to increase the precision thus often yield tight structure bundles where the precision overestimates the accuracy. To overcome this problem, the chapter “Increased reliability of NMR protein structures by consensus structure bundles” introduces a new protocol for NMR structure determination with the software package CYANA that produces bundles of conformers with a realistic precision that is throughout a large number of test data sets a much better estimate of the structural accuracy than the precision of conventional structure bundles.
Solid-state NMR is a powerful technique to study molecules which are not amenable to either solution NMR or X-ray crystallography. Despite the reporting of individual atomic resolution structures of membrane proteins and amyloid fibrils based on solid-state NMR data, the application is far from routine. One major obstacle that hinders structure determination by solid-state NMR is the overall lower quality of the solid-state NMR spectra. It is therefore necessary to increase the robustness of the computer algorithms in order to improve the results when using lower quality solid-state NMR spectra. The chapter “Structure calculations of the model protein GB1 from solid-state NMR data” presents structure calculations on the basis of a set of two-dimensional solid-state NMR experiments of the model protein GB1. The most important result obtained from these test calculations is that the limitation of structural accuracy can be attributed to inaccurate distance information resulting from the limited correlation between peak intensities and distance, which is especially severe in spin diffusion-based solid-state NMR experiments.
The chapter “Full relaxation matrix-based correction of relayed polarization transfer for solid-state NMR structure calculation” therefore introduces a method which corrects experimental peak intensities for spin diffusion in order to improve the distance information from solid-state NMR spectra. The results show that the structural accuracy can be significantly improved when using the corrected distance information, however, strongly dependent on the preliminary structural model that is required as input for the method.
Die 5-Lipoxygenase (5-LO) ist eines der Schlüsselenzyme der Leukotrienbiosynthese. Sie katalysiert zunächst die Umsetzung der freigesetzten Arachidonsäure(AA) zu 5-Hydroperoxyeicosatetraensäure (5-HpETE), in einem zweiten Reaktionsschritt wandelt sie diese in Leukotrien A4 (LTA4) um. Leukotriene sind potente Entzündungsmediatoren und spielen eine wichtige Rolle bei entzündlichen und allergischen Reaktionen. Außerdem wird die Beteiligung an verschiedenen Krebsarten kontrovers diskutiert.
Sie besteht aus 673AS, ist 78 kDa schwer und gliedert sich wie alle bisher bekannten Lipoxygenasen in eine N-terminale C2-ähnliche, regulatorische Domäne(AS 1–114) (C2ld), die für die Membran- und Calciumbindung sowie die Interaktion mit dem Coactosin-like Protein (CLP) verantwortlich ist, und in eine C-terminale, katalytische Domäne (AS 121–673), die das Nicht-Häm-gebundene Eisen im aktiven Zentrum trägt. Ein weiteres Strukturmerkmal sind zwei ATP-Bindungsregionen, eine befindet sich in der C2ld (AS 73–83), die andere auf der katalytischen Domäne (AS 193–209), das molare Verhältnis von 5-LO zu ATP konnte dabei auf 1:1 festgelegt werden [167].
Bereits 1982 wurde in einer Veröffentlichung von Parker et al. beschrieben, dass 5-LO aus Rattenzellen in Gegenwart von Calcium auf einer Gelfiltration dimerisieren kann [204], 2008 schließlich wurde von Aleem et al. publiziert, dass humane 12-LO aus Thrombozyten Dimere bilden kann [219]. Somit konnte es möglich sein, dass auch die humane 5-LO zur Dimerisierung fähig ist.
Zunächst wurde aufgereinigtes Enzym mit nativer Gelelektrophorese und anschließender Coomassiefärbung oder Western Blot untersucht, dabei konnten mehrere Banden pro Bahn detektiert werden. Um dieses Phänomen weiter zu untersuchen, wurde im Anschluss eine Gelfiltration etabliert; da die C2ld der 5-LO recht hydrophob ist, war es nötig, 0,5% T20 zum Elutionspuffer PBS/EDTA zuzusetzen, da das Enzym ansonsten unspezifisch mit dem Säulenmaterial interagiert und für seine Größe zu spät eluiert hätte. In Anwesenheit von T20 eluierte 5-LO in zwei getrennten Peaks, die exakt zu den vorher mit Referenzproteinen bestimmten Elutionsvolumina des Monomers und Dimers passten. Weiter wurde getestet, ob niedermolekulare Substanzen einen Einfluss auf das Dimerisierungsverhalten haben, allerdings konnte weder durch Ca2+noch durch ATP eine Verstärkung der Dimerisierung beobachtet werden. Dahingegen konnte, nach Vorinkubation mit GSH und Diamid, das alleinige Monomer auf der Gelfiltration nachgewiesen werden, nach Vorinkubation nur mit Diamid, lag das gesamte Protein ausschließlich als Dimer vor. Durch Gelelektrophorese mit oder ohne Zusatz von ß-Mercaptoethanol und LILBID-MS konnte die Ausbildung von intermolekularen Disulfidbrücken bestätigt werden. Ein Bindungsassay mit radioaktivem 35S-GSH konnte die kovalente Bindung des GSH an die 5-LO bestätigen. Quantifizierungsstudien mit Ellmans Reagens zeigten, dass mindestens eins der Oberflächencysteine mit GSH modifiziert wurde. Die von der Gelfiltration erhaltenen Fraktionen wurden auf enzymatische Aktivität getestet und in allen 5-LO-haltigen Fraktionen konnte Aktivität gefunden werden. Leider war es nicht möglich, eine Aussage darüber zu treffen, ob das Mono- oder das Dimer aktiver war. Es liegt offenbar in einem Fließgleichgewicht vor, da erneute Injektion des Monomerpeaks im bekannten Elutionsprofil aus zwei Peaks resultierte. Außerdem führt die Anwesenheit von 0,5% T20 während des Aktivitätstests zu einer Hemmung des Enzyms und weniger detektierbaren 5-LO-Produkten; es fiel vor allem auf, dass so gut wie keinerlei trans- und epitrans-LTB4, die nicht-enzymatischen Zerfallprodukte der 5-HpETE, nachzuweisen waren. Betrachtet man die Struktur der 5-LO, so findet man zehn Cysteine an der Oberfläche; die Cysteine 159, 300, 416 und 418 liegen dabei in einem Interface. Mutiert man diese Cysteine zu Serinen, so verschwindet der Dimer-induzierende Effekt des Diamids, wohingegen die Mutante weiterhin glutathionylierbar bleibt. Interessanterweise zeigt diese Mutante auch eine wesentlich weniger ausgeprägte Hemmung durch T20. Um eine Aussage treffen zu können, ob auch 5-LO aus humanen Zellen Dimere bilden kann, wurde 5-LO-haltiger S100 aus polymorphkernigen Leukozyten (PMNL) untersucht. Dabei konnte mit Western Blot und einem Aktivitätsnachweis gezeigt werden, dass die 5-LO in einem breiten Bereich von der Gelfiltration eluiert. Das deutet darauf hin, dass sie in PMNL ebenfalls dimerisiert vorliegen kann. In Gegenwart von Ca2+kam es zu einer Verschiebung der 5-LO zu höhermolekularen Gewichten, wobei dieses Phänomen nicht bei S100 aus transformierten E.coli auftrat, was auf einen gerichteten Komplex nach Calciuminduktion in PMNL hindeutet.
Außerdem wurde im Rahmen dieser Arbeit der Bindemodus von Sulindac an die 5-LO mittels Crosslinking untersucht. Dabei konnte gezeigt werden, dass konzentrationsabhängig der einfache Komplex aus 5-LO und CLP abnimmt, dafür aber ein hochmolekularer Komplex, der beide Enzyme enthält, entsteht. Weder das Prodrug Sulindac noch der weitere Metabolit Sulindacsulfon oder andere Inhibitoren, die ebenfalls an der C2ld angreifen sollen, zeigten diesen Effekt. Leider konnte nicht weiter geklärt werden, was diesen Effekt verursacht, allerdings liegt die Vermutung nahe, dass es zu einer Aggregation kommt. Weitere Untersuchungen könnten wichtige Hinweise auf das Design von neuen Arzneistoffen bringen, um selektivere und damit nebenwirkungsärmere Inhibitoren zu finden.
Channelrhodopsin-2 (ChR2) is a light-gated cation selective channel from the unicellular alga Chlamydomonas reinhardtii, which is involved in phototaxis and photophobic responses. As other rhodopsins, ChR2 comprises a seven-transmembrane helix (TMH) motif and a retinal as the light-sensitive chromophore. The chromophore is covalently attached via a protonated Schiff base to the conserved lysine residue Lys257 located in TMH7. Based on its primary sequence and the all-trans configuration of the retinal in the ground state, ChR2 is assigned to the type I rhodopsins, also referred to as microbial-type rhodopsins. Upon light activation, the retinal isomerizes from the all-trans to the 13-cis form. This photoisomerization, which is accompanied by conformational changes of the protein, eventually leads to the opening of the channel and cation translocation. Cation flux during the conductive state leads to depolarization of the cell membrane and subsequent triggering of action potentials when expressed in neurons. Therefore, ChR2 has become the most versatile optogenetic tool, enabling a non-invasive investigation of neural circuits at high spatial and temporal resolution. With the rapidly increasing importance of ChR2 as a tool in neurobiology and cell biology, structural information is the prerequisite to an unambiguous understanding of the molecular mechanisms of this unique light-activated ion channel. The coupling between isomerization and structural alterations is well understood for other microbial-type rhodopsins, like bacteriorhodopsin (bR), halorhodopsin (HR) and sensory rhodopsin II (SRII). In case of ChR2, the first data on light-induced conformational changes came from spectroscopic studies and structural information is still missing. However, in order to fully understand the mechanism of light transduction by ChR2, it is necessary to determine the changes in the protein structure at specific steps in the photocycle.
By the time I started my PhD thesis, there was no structural information of ChR2 available. Therefore, the objective of this thesis was to obtain structural information of the transmembrane domain containing the first 315 amino acids of ChR2 by cryo electron crystallography. Besides revealing the structure of membrane proteins, cryo-EM of two-dimensional (2D) crystals is ideal for investigating conformational changes in membrane proteins induced by different stimuli. Therefore, the second objective of my thesis was the investigation of light-induced conformational changes in the slow C128T ChR2 mutant. The ~1,000 times longer lifetime of the open state of the C128T mutant compared to the wild-type allowed to trap different intermediates that accumulate during the photocycle.
In 2012, the X-ray structure of a channelrhodopsin-1/channelrhodopsin-2 chimaera (C1C2) at 2.3 Å resolution in the closed dark-adapted state was published (Kato et al., 2012). The structure revealed the essential molecular architecture of C1C2, including the retinal-binding pocket and the putative cation conduction pathway. Together with biochemical, spectroscopic, mutagenesis experiments, and the high-resolution model, some functionally important residues of ChR2 have been identified. However, unambiguous explanation of the molecular determinants that contribute to activation (gating) and transport were still mostly unknown.
RESULTS AND CONCLUSIONS
The first half of my theses dealt with 2D crystallization of ChR2. I succeeded in obtaining 2D crystals of ChR2 of four different types, which differed in size, crystal packing, crystal contacts and resolution, yielding structure factors up to 6 Å resolution. The crystals were grown by reconstituting the protein with different lipids at various lipid-to-protein ratios. The best crystals formed with the synthetic lipid DMPC and EPL upon detergent removal by dialysis. The projection maps calculated from these crystals revealed the overall structure of C128T ChR2 at 6 Å resolution and were published in 2011 (Müller et al., 2011). Surprisingly, ChR2 was found to be a dimer in all crystal types. The ChR2 dimer was stable both in detergent solution and in the presence of lipids for 2D crystallization. The monomers clearly showed the expected densities for the seven TMHs.
The arrangement of the ChR2 dimers on the four 2D lattices was different. However, comparison of the individual rojection maps revealed no significant differences within the ChR2 interface in the four crystal forms. The observation that the structure of the dimer was the same in all four crystal forms and in different lipids suggested strong specific contacts between the two protomers and implied that the protein was also dimeric in the native membrane. These findings were in agreement with Western blot analysis of plasma membranes from oocytes expressing ChR2 and laser-induced liquid bead ion desorption mass spectrometry, which both showed ChR2 as a dimer. The unusual stability of the ChR2 dimer contrasts with other microbial rhodopsins, which exist in different oligomeric states, i.e. monomers, trimers or dimers. These observations raised the question whether the functional unit is the monomer or the dimer.
The comparison of the projection map of the light-driven proton pump bR at the same resolution showed similar overall dimensions. Based on this comparison, the densities which became evident in the ChR2 projection maps could be assigned to the corresponding seven densities in bR. The shape of the densities near the dimer interface suggested that TMHs 2, 3, and 4 are oriented more or less perpendicular to the membrane plane, while the other four helices appear to be more tilted, as in bR.
Based on the high-resolution bR structure and the projection structures obtained, I have built a homology model. On the basis of this homology model, several residues found in the dimer interface were selected for mutational studies in order to disrupt the dimer interface.
The investigation of light-induced conformational changes in C128T ChR2 was the second part of my thesis. I designed an experimental setup for trapping light-induced conformational changes in C128T ChR2. In addition, I optimized the sample preparation in a way that the different illumination conditions did not alter the quality of the crystals. I have trapped two different functional states, namely the conductive open state and the non-conductive closed dark-adapted state.
In order to visualize the location and the extent of conformational changes, projection difference maps were calculated between the open and the closed state. Visual inspection of the difference maps between the open and the two closed states revealed three difference peaks that map to the TMHs 2, 6, and 7, indicating significant and specific rearrangements of these helices. The strong pair of positive/negative peaks at TMH6 suggests an outward tilt movement of approximately 2 Å. Close comparison of similar work on bR revealed that this movement is likely to occur at the cytoplasmic end of TMH6. A second highly significant negative peak is observed at TMH7, indicating a less pronounced tilt compared to TMH6. The third negative peak at TMH2 indicates a loss of density in this region. No significant differences were recorded at the TMH1, 5 and at the dimer interface formed by TMH3 and 4.
I succeeded in trapping and characterizing the open and closed state in the photocycle of ChR2 and could demonstrate that the transition from the closed to the open state is linked to significant light-induced tilt movements of TMH6 and 7, plus a loss of order in TMH2. These conformational changes are likely to create a large water-filled conducting pore, which seems to be required for the conductance of up to 2,000 ions per photocycle. The previously mentioned spectroscopic studies support the difference structures I obtained. This approach sets the stage for studying structural changes accompanying the formation and decay of other photocycle intermediates in ChR2. Future studies will aim at three-dimensional maps of the open and closed state at higher resolution.
Proteorhodopsin (PR) originally isolated from uncultivated γ-Proteobacterium as a result of biodiversity screens, is highly abundant ocean wide. PR, a Type I retinal binding protein with 26% sequence identity, is a bacterial homologue of Bacteriorhodopsin (BR). The members within this family share about 78% of sequence identity and display a 40 nm difference in the absorption spectra. This property of the PR family members provides an excellent model system for understanding the mechanism of spectral tuning. Functionally PR is a photoactive proton pump and is suggested to exhibit a pH dependent vectorality of proton transfer. This raises questions about its potential role as pH dependent regulator. The abundance of PR in huge numbers within the cell, its widespread distribution ocean wide at different depths hints towards the involvement of PR in utilization of solar energy, energy metabolism and carbon recycling in the Sea. Contrary to BR, which is known to be a natural 2D crystal, no such information is available for PR til date. Neither its functional mechanism nor its 3D structure has been resolved so far. This PhD project is an attempt to gain a deeper insight so as to understand structural and functional characterization of PR. The approach combines the potentials of 2D crystallography, Atomic Force Microscopy and Solid State NMR techniques for characterization of this protein. Wide range of crystalline conditions was obtained as a result of 2D crystallization screens. This hints towards dominant protein protein interactions. Considering the high number of PR molecules reported per cell, it is likely that driven by such interactions, the protein has a native dense packing in the environment. The projection map represented low resolution of these crystals but suggested a donut shape oligomeric arrangement of protein in a hexagonal lattice with unit cell size of 87Å*87Å. Preliminary FTIR measurements indicated that the crystalline environment does not obstruct the photocycle of PR and K as well as M intermediate states could be identified. Single molecule force spectroscopy and atomic force microscopy on these 2D crystals was used to probe further information about the oligomeric state and nature of unfolding. The data revealed that protein predominantly exists as hexamers in crystalline as well as densely reconstituted regions but a small percentage of pentamers is also observed. The unfolding mechanism was similar to the other relatively well-characterized members of rhodopsin family. A good correlation of the atomic force microscopy and the electron microscopy data was achieved. Solid State NMR of the isotopically labeled 2D crystalline preparations using uniformly and selectively labeling schemes, allowed to obtain high quality SSNMR spectra with typical 15N line width in the range of 0.6-1.2 ppm. The measured 15N chemical shift value of the Schiff base in the 2D crystalline form was observed to be similar to the Schiff base chemical shift values for the functionally active reconstituted samples. This provides an indirect evidence for the active functionality of the protein and hence the folding. The first 15N assignment has been achieved for the Tryptophan with the help of Rotational Echo Double Resonance experiments. The 2D Cross Polarization Lee Goldberg measurements reflect the dynamic state of the protein inspite of restricted mobility in the crystalline state. The behavior of lipids as measured by 31P from the lipid head group showed that the lipids are not tightly bound to the protein but behave more like the lipid bilayer. The 13C-13C homonulear correlation experiments with optimized mixing time based on build up curve analysis, suggest that it is possible to observe individual resonances as seen in case of glutamic acid. The signal to noise was good enough to record a decent spectrum in a feasible period. The selective unlabeling is an efficient method for reduction in the spectral overlap. However, more efficient labeling schemes are required for further characterization. The present spectral resolution is good for individual amino acid investigation but for uniformly labeled samples, further improvement is required.
Die in dieser Arbeit durchgeführten Untersuchungen an GXG Modellpeptiden konnten eindeutig zeigen, dass diese Peptide, auch ohne das Vorhandensein von langreichweitigen Wechselwirkungen, bestimmte Sekundärstrukturen präferieren. Ein Teil der beobachteten, auftretenden Strukturmotive lässt sich hierbei über den sterischen Anspruch der Seitenkette erklären, ein anderer Teil über die Ladung der Seitenkette. In Kombination mit anderen Spektroskopischen Methoden konnten zehn dieser Peptide genauestens untersucht werden. Hierbei zeigte sich, dass diese Peptide nicht nur die favorisierten Regionen des Ramachandran-Diagramms besetzen. Ein Vergleich mit dem Vorkommen bestimmter Aminosäuren, beispielsweise in loop Regionen von Proteinen, zeigt dass die Sequenz dieser loops nicht zufällig ist. Tatsächlich besitzt ein Teil der Aminosäuren, die besonders häufig an bestimmten loop Positionen vorkommen, bereits die intrinsische Vorliebe, die notwendige Konformation einzunehmen. Diese Aminosäuren und die umgebenden loops sind somit eventuell nicht nur das simple Verbindungsglied zwischen zwei Sekundärstrukturen, sondern kommen selbst als Ausgangspunkte für Peptid- bzw. Proteinfaltung in Frage.
Ein weiteres Augenmerk der Arbeit lag auf der Messung von skalaren und dipolaren Kopplungen an isotopenmarkierter RNA. Es wurden vier Pulssequenzen entwickelt, die es ermöglichen, 1J skalare bzw. dipolare Kopplungen in der Zuckerregion von 13C- markierter RNA mit hoher Präzision zu messen. Die entwickelten J-modulierten Experimente ermöglichen die Messung von 1J(H2’C2’), 1J(C1’C2’) sowie 1J(C2’C3’) Kopplungen selbst für größere RNA Moleküle. Die Detektion erfolgt hierbei auf den C1’H1’ Signalen, die Zuordnung der Kerne, deren Kopplung gemessen wird, ist nicht einmal erforderlich. Die Anwendbarkeit konnte für verschiedene Systeme mit 14 bis 70 Nukleotiden demonstriert werden. Die erreichte Präzision ermöglichte es außerdem auch sehr kleine Effekte, wie beispielsweise die Ausrichtung von RNA im Magnetfeld zu detektieren.
Diese Arbeit zeigt außerdem zwei Beispiele für die gezielte Modifikation, um Lanthanid Bindungsstellen einführen zu können. Auf chemischen und biochemischen Weg konnte isotopenmarkierte, in vitro transkribierte RNA modifiziert werden. Die Ergebnisse zeigen eindeutig eine Bindung von Lanthanid-Ionen an die modifizierte RNA. Die auftretenden, eher kleinen Effekte, sind vermutlich auf die noch zu hohe Flexibilität der eingeführten Modifikationen. Vor allem bei der chemischen Modifikation besteht hier noch Potential zur Optimierung, nachdem die generelle Anwendbarkeit der Methode demonstriert wurde.
Der letzte Teil der Arbeit beschäftigt sich mit der Analyse von Kopplungsmustern zur Analyse und zum Vergleichen von Naturstoffen. Hier konnten aus einer Reihe von Derivaten eindeutig die identifiziert werden, die verglichen mit der Ausgangsstruktur, die gleiche Konformation besitzen. Die gewonnenen Ergebnisse decken sich hier mit durchgeführten biologischen Tests, die ebenfalls dasselbe Derivat als aktiv identifizieren konnten, was klar für eine Struktur-Aktivitäts-Beziehung spricht.
In der vorliegenden Arbeit werden Methoden und Anwendungen gezeigt, um skalare und dipolare Kopplungen im Bereich von Peptiden, Nukleinsäuren und kleinen Molekülen zu nutzen. Die durchgeführten Arbeiten reichen dabei von der speziellen Probenpräparation zur Messung von dipolaren Kopplungen bis hin zur Entwicklung neuer NMR-spektroskopischer Methoden zur Messung von Kopplungen mit höherer Präzision und an größeren Systemen als bisher.
The following thesis is concerned with the elucidation of structural changes of RNA molecules during the time course of dynamic processes that are commonly denoted as folding reactions. In contrast to the field of protein folding, the concept of RNA folding comprises not only folding reactions itself but also refolding- or conformational switching- and assembly processes (see chapter III). The method in this thesis to monitor these diverse processes is high resolution liquid-state NMR spectroscopy. To understand the reactions is of considerable interest, because most biological active RNA molecules function by changing their conformation. This can be either an intrinsic property of their respective sequence or may happen in response to a cellular signal such as small molecular ligand binding (like in the aptamer and riboswitch case), protein or metal binding. The first part of the thesis (chapters II & III) provides a general overview over the field of RNA structure and RNA folding. The two chapters aim at introducing the reader into the current status of research in the field. Chapters II is structured such that primary structure is first described then secondary and tertiary structure elements of RNA structure. A special emphasis is given to bistable RNA systems that are functionally important and represent models to understand fundamental questions of RNA conformational switching. RNA folding in vitro as well as in vivo situations is discussed in Chapter III. The following chapters IV and V also belong to the introduction part and review critically the NMR methods that were used to understand the nature and the dynamics of the conformational/structural transitions in RNA. A general overview of NMR methods quantifying dynamics of biomolecules is provided in chapter IV. A detailed discussion of solvent exchange rates and time-resolved NMR, as the two major techniques used, follows. In the final chapter V of the first part the NMR parameters used in structure calculation and structure calculation itself are conferred. The second part of the thesis, which is the cumulative part, encompasses the conducted original work. Chapter VI reviews the general NMR techniques applied and explains their applicability in the field of RNA structural and biochemical studies in several model cases. Chapter VII describes the achievement of a complete resonance assignment of an RNA model molecule (14mer cUUCGg tetral-loop RNA) and introduces a new technique to assign quaternary carbon resonances of the nucleobases. Furthermore, it reports on a conformational analysis of the sugar backbone in this RNA hairpin molecule in conjunction with a parameterization of 1J scalar couplings. Achievements: • Establishment of two new NMR pulse-sequences facilitating the assignment of quaternary carbons in RNA nucleobases • First complete (99.5%) NMR resonance assignment of an RNA molecule (14mer) including 1H, 13C, 15N, 31P resonances • Description of RNA backbone conformation by a complete set of NMR parameters • Description of the backbone conformational dependence in RNA of new NMR parameters (1J scalar couplings) Chapters VII & VIII summarize the real-NMR studies that were conducted to elucidate the conformational switching events of several RNA systems. Chapter VIII gives an overview on the experiments that were accomplished on three different bistable RNAs. These molecules where chosen to be good model systems for RNA refolding reactions and so consequently served as reporters of conformational switching events of RNA secondary structure elements. Achievements: • First kinetic studies of RNA refolding reactions with atomic resolution by NMR • Application of [new] RT-NMR techniques either regarding the photolytic initiation of the reaction or regarding the readout of the reaction • Discovery of different RNA refolding mechanisms for different RNA molecules Deciphering of a general rule for RNA refolding methodology to conformational switching processes of RNA tertiary structure elements. The models for these processes were a) the guanine-dependent riboswitch RNA and b) the minimal hammerhead ribozyme. Achievements: • NMR spectroscopic assignment of imino-resonances of the hypoxanthine bound guanine-dependent riboswitch RNA • Application of RT-NMR techniques to monitor the ligand induced conformational switch of the aptamer domain of the guanine-dependent riboswitch RNA at atomic resolution • Translation of kinetic information into structural information • Deciphering a folding mechanism for the guanine riboswitch aptamer domain • Application of RT-NMR techniques to monitor the reaction of the catalytically active mHHR RNA at atomic resolution In the appendices the new NMR pulse-sequences and the experimental parameters are described, which are not explicitly treated in the respective manuscripts.
According to the World Health Organization (WHO) bacterial resistance to antibiotic drug therapy is emerging as a major public health problem around the world. Infectious diseases seriously threaten the health and economy of all countries. Hence, the preservation of the effectiveness of antibiotics is a world wide priority. The key to preserving the power of antibiotics lies in maintaining their diversity. Many microorganisms are capable of producing these bioactive products, the so called antibiotics. Specifically in microorganisms, polyketide synthases (PKS) and non-ribosomal peptide synthases (NRPS) produce these natural bioactive compounds. Besides being used as antibiotics these non-ribosomal peptides and polyketides display an even broader spectrum of biological activities, e.g. as antivirals, immunosuppressants or in antitumor therapy. The wide functional spectrum of the peptides and ketides is due to their structural diversity. Mostly they are cyclic or branched cyclic compounds, containing non-proteinogenic amino acids, small heterocyclic rings and other unusual modifications such as epimerization, methylation, N‐formylation or heterocyclization. It is has been shown that these modifications are important for biological activity, but little is known about their biosynthetic origin.
PKS and NRPS are multidomain protein assembly lines which function by sequentially elongating a growing polyketide or peptide chain by incorporating acyl units or amino acids, respectively. The growing product is attached via a thioester linkage to the 4’-phosphopantetheine (4’-Ppant) arm of a holo acyl carrier protein (ACP) in PKSs or holo peptidyl carrier protein (PCP) in NRPSs and is passed from one module to another along the chain of reaction centers. The modular arrangement makes PKS and NRPS systems an interesting target for protein engineering. More than 200 novel polyketide compounds have already been created by module swapping, gene deletion or other specific manipulations. Unfortunately, however, engineered PKS often fail to produce significant amounts of the desired products. Structural studies may faciliate yield improvement from engineered systems by providing a more complete understanding of the interface between the different domains. While some information about domain-domain interactions, involving the most common enzymatic modules, ketosynthase and acyltransferase, is starting to emerge, little is known about the interaction of ACP domains with other modifying enzymes such as methyltransferases, epimerases or halogenases.
To further improve the understanding of domain-domain interactions this work focuses on the curacin A assembly line. Curacin A, which exhibits anti-mitotic activity, is from the marine cyanobacterium Lyngbya majuscula. This outstanding natural product contains a cyclopropane ring, a thiazoline ring, an internal cis double bond and a terminal alkene. The biosynthesis of curacin A is performed by a 2.2 Mega Dalton (MDa) hybrid PKS-NRPS cluster. A 10-enzyme assembly catalyzes the formation of the cyclopropane moiety as the first building block of the final product. Interestingly, for these enzymes the substrate is presented by an unusual cluster of three consecutive ACPs (ACPI,II,III). Little is known about the function of multiple ACPs which are supposed to increase the overall flux for enhanced production of secondary metabolites.
The first task in this work was to elucidate the structural effect of the triplet ACP repetition by nuclear magnetic resonance (NMR). The initial data show that the excised ACPI, ACPII or ACPIII proteins resulted in [15N, 1H]-TROSY spectra with strong chemical shift perturbations (CSPs), suggesting an effect on the structure. The triplet ACP domains display a high sequence identity (93- 100%) making structural investigation using usual NMR techniques due to high peak overlap impossible. To enable the investigation of the triplet ACP in its native composition we developed a powerful method, the three fragment ligation. Segmental labeling allows incorporating isotopes into one single domain in its multidomain context. As a result we could prepare the triplet ACP with only one domain isotopically labeled and therefore assign the full length protein. In this way our method paved the way to study the structural effects of the triplet ACP repetition. We could show unexpectedly, that, despite the fact that the triplet repeat of CurA ACPI,II,III has a synergistic effect in the biosynthesis of CurA, the domains are structurally independent.
In the second part of this work, we studied the structure of the isolated ACPI domain. Our results show that the CurA ACPI undergoes no major conformational changes upon activation via phosphopantetheinylation and therefore contradicts the conformational switching model which has been proposed for PCPs. Further we report the NMR solution structures of holo-ACPI and 3-hydroxyl-3-methylglutaryl (HMG)-ACPI. Data obtained from filtered nuclear overhauser effect (NOE) experiments indicate that the substrate HMG is not sequestered but presented on the ACP surface.
In the third part of this work we focussed on the protein-protein interactions of the isolated ACPI with its cognate interaction partners. We were especially interested in the interaction with the halogenase (Cur Hal), the first enzyme within the curacin A sub-cluster, acting on the initial hydroxyl-methyl-glutaryl (HMG) attached to ACPI. Primarily we studied the interaction using NMR titration and fluorescence anisotropy measurements. Surprisingly no complex between ACPI and Cur Hal could be detected. The combination of an activity assay using matrix-assisted laser desorption/ionization (MALDI) mass spectroscopy and mutational analysis revealed several amino acids of ACPI that strongly decrease the activity of CurA Hal. Mapping these mutations according to their effect on the Cur Hal activity onto the structure of HMG-ACPI displays that these amino acids surround the substrate and form a consecutive surface. These results suggest that this surface is important for Cur Hal recognition and selectivity. Our research presented herein is an excellent example for protein-protein interactions in PKS systems underlying a specific recognition process.
Eine wichtige Klasse von Membranproteinen ist die der aktiven sekundären Transporter. Diese Proteine werden in allen Spezies gefunden und verwenden einen Gradienten von löslichen Substanzen, um den Transport von Substraten voran zu treiben. Dieser Transportprozess ist essentiell, um die chemische Zusammensetzung des Zytoplasmas, wie Kalium- oder Natriumkonzentration von der des umgebenden Milieus unterschiedlich zu halten. Die Konzentration von K+ und Na+ in der Zelle sind wichtig für ein konstantes Zellvolumen, für die pH-Homöostase, für die Erregbarkeit von Nervenzellen und füür die Akkumulierung von Zuckern und Aminosöuren über Kotransportsysteme. In Bakterien wie Escherichia coli wird mit der Oxidation von Substraten durch die Elektronentransportkette ein Protonengradient und gleichzeitig eine Potentialdifferenz erzeugt. Ein Beispiel für einen sekundären Transporter, der diese Potentialdifferenz ausnutzt ist der Na+/H+-Antiporter NhaA, einer der am besten untersuchten Antiporter aus E. coli (Hunte, Screpanti et al. 2005). Dieser Antiporter ist essentiell für die Fähigkeit von Bakterien im alkalischen pH-Bereich zu überleben. Auch bei Säugetieren, sind die Isoformen der humanen Natrium/Protonen-Antiporter SLC9A1-SLC9A8 (NHE1-8) unentbehrlich für eine Reihe physiologischer Prozesse. So wird über die Antiporter-Aktivität nicht nur der Säure-Base-Haushalt und das Verhältnis des Zellvolumens zur Menge an Elektrolyten reguliert, Antiporter spielen ebenso eine wichtige Rolle bei der Adhäsion, Migration und Proliferation der Zelle (Orlowski and Grinstein 2004). Anomalien in diesem Bereich sind charakteristisch für maligne Zellen. Die Rolle von NHE1 in der Entwicklung von Tumoren ist daher ein wichtiger Ansatzpunkt für die Entwicklung von Krebsmedikamenten. Im Herz ist NHE1 die dominierende Isoform und wird damit zu einem pharmakologisch wertvollen Zielprotein (Malo and Fliegel 2006). Struktur und Mechanismus der meisten Antiporter ist bis dato jedoch noch nicht bekannt. Neben den klassischen Methoden der Pharmaentwicklung wird die strukturbasierende Wirkstoffentwicklung immer wichtiger um effiziente Medikamente ohne Nebenwirkung zu herzustellen. Hierfür werden jedoch 3D-Strukturen von Proteinen, sowie genaue Kenntnisse von deren Mechanismus benötigt. Zieht man in Betracht, dass 70% aller bis jetzt entwickelten Medikamente als Ziel ein Membranprotein haben, wird die Notwendigkeit klar, eine möglichst große Anzahl von Membranproteinstrukturen verfgbar zu haben. Wie bereits erwähnt ist die Klasse der monovalenten Kation/Proton-Antiporter aufgrund ihrer vielfältigen Aufgaben, eine äußerst wichtige Zielgruppe für die strukturbasierende Wirkstoffentwicklung. Die große Anzahl an entschlüsselten Genomen eröffnet hier ein breites Forschungsfeld füür die Strukturbiologie. In dieser Arbeit wurden daher Techniken und Methoden aus Hochdurchsatz-orientierten Strukturgenomikprojekten übernommen, um eine große Anzahl von Zielproteinen in ausreichender Menge für die funktionelle Charakterisierung und für die Kristallisation zu produzieren. Als Zielorganismen wurden Salmonella typhimurium LT2, Helicobacter pylori 26695, Aquifex aeolicus VF5 und Pyrococcus furiosus ausgewählt. Die Grundlage dieser Entscheidung hierfür waren die humanpathogenen Eigenschaften der beiden zuerst genannten Organismen und die Hyperthermophilie der beiden letzteren. Dadurch konnten sowohl klinische Anwendungsmöglichkeiten, als auch die potentiell höhere Stabilität der hyperthermophilen Proteine genutzt werden. Als Proteinzielgruppe wurden die monovalenten Kation/Proton-Antiporter aus allen 4 Organismen ausgewählt. Des Weiteren wurden Antiporter zweier eukaryotischer Systeme, Saccharomyces cerevisiae und Homo sapiens in die Zielproteingruppe aufgenommen. In dieser Arbeit wurden 24 verschiedene monovalente Kation/Proton-Antiporter untersucht. Von diesen 24 Zielproteinen konnten 12 in Expressionsvektoren kloniert und produziert werden. Von diesen 12 Antiportern konnten die Zielproteine STM0039 (STNhaA), HP1552 (HPNhaA), STM1556 (NhaC) und PF2032 (NhaC) in einer für die Kristallisation ausreichenden Homogenität und Ausbeute gereinigt werden. Mit der Ausnahme von HP1552 ist bis heute in keiner Veröffentlichung über diese Zielproteine berichtet worden. Durch Komplementationsexperimente mit dem E. coli-Deletionsstamm EP432 konnten eine Reihe von Zielproteine (STM0039, HP1552, PF2032, Aq_2030, STM1806, STM1556) bezüglich ihrer Fähigkeiten zum Na+/H+-Antiport untersucht werden. Die Ziel-proteine STM0039, STM1556 und HP1552 konnten zum ersten Mal kloniert, produziert, gereinigt und anschlieáen in Liposomen rekonstitutiert werden.Weiterhin konnte durch SSM-Messung die pH-Regulation der Zielproteine STM0039 und HP1552 gezeigt werden. Im Gegensatz zu bisherigen Literaturangaben ist HP1552 im pH-Bereich von pH 6 bis 8,5 nicht konstitutiv aktiv, sondern erfährt eine ähnliche Aktivierung wie STM0039 oder ECNhaA. STM0039 lässt sich zudem durch 2-Aminoperimidin inhibieren. Für STM0039 konnten die ersten Proteinkristalle der inaktiven Konformation bei pH 4 erzeugt werden. Weiterhin wurde in dieser Arbeit ein gegen das Zielprotein STM0039 gerichtetes scFV-Antikörperfragment (F6scFv) eingehend charakterisiert. Durch die Ko-Kristallisation des Antikörperfragments F6scFv mit STM0039 konnten die ersten 3 dimensionalen Kristalle in einer aktiven Proteinkonformation bei pH 7,5 erzeugt werden. Neben den bereits verfeinerten Kristallisationsbedingungen für das Zielprotein STM0039 wurden erfolgreich erste Kristallisationsbedingungen für STM0086 und PF2032 gefunden. Es wurde eine Vielzahl von Produktions- und Reinigungsprotokollen füür die Zielproteine etabliert. Dadurch ist der Grundstein füür weitergehende Charakterisierungs- und Kristalli-sationsexperimente gelegt. Die in dieser Arbeit etablierte Kombination von Hochdurch-satzmethoden mit klassischen Vorgehensweisen zur Proteincharakterisierung lassen sich leicht auf anderen Membranproteinklassen bertragen und die Geschwindigkeit der ver-schiedenen Schritte bis zur Strukturlösung stark beschleunigen.
Fokus meiner Doktorarbeit ist die Anwendung und Entwicklung NMR-spektroskopischer Methoden zur Charakterisierung zeitabhängiger Strukturänderungen von Biomolekülen – von lokalen dynamischen Veränderungen bis zur vollständigen Rückfaltung von Proteinen – und fasst die Ergebnisse meiner drei wichtigsten PhD-Projekte zusammen.
In meinem ersten Projekt habe ich die Leistung eines Temperatursprung-Probenkopfs – mit dem Proben mit hoher Salzkonzentration schnell erwärmt werden können – mithilfe einer Hochfrequenzspule technisch optimiert. Die optimierten Radiofrequenz-Bestrahlungsparameter, Lösungsmittel-bedingungen und der reduzierte Arbeitszyklus führten zu einem Temperatursprung von 20 °C in 400 ms. Ich habe eine Cystein-freie Mutante von Barstar hergestellt, die nach Zugabe von Harnstoff bei 0 °C kalt denaturiert werden kann, während sie ihren gefalteten Zustand bei 30 °C hält. Dadurch wurde auch ermöglicht, dass der Rückfaltungsprozess hunderte Male ohne Abbau oder Aggregation wiederholt werden kann. Die Kombination von reversibler Rückfaltung und rascher Temperaturänderung des kalt denaturierten Barstars ermöglichte die Entwicklung eines neuen kinetischen Experiments, bei dem der Rückfaltungsprozess von Barstar mit einem zweidimensionalen Echtzeit-NMR in hoher Zeitauflösung untersucht wird. Die vollständige Rückgratresonanzzuweisung wurde sowohl für den gefalteten als auch für den kalt denaturierten Zustand von Barstar durchgeführt und ergab, dass in der denaturierten Form beide Prolin-Reste einen gemischten Konformationszustand aufweisen. Dabei befindet sich die Tyr47-Pro48-Amidbindung im ungefalteten Zustand hauptsächlich in trans-, während im gefalteten Zustand in der seltenen cis-Konformation. Das neue hochauflösende kinetische Experiment zeigte, dass die Rückfaltung von Barstar durch die trans-cis-Isomerisierung der Tyr47-Pro48-Amidbindung verlangsamt wird, was sowohl die Sekundärstruktur als auch die Bildung der Tertiärstruktur beeinflusst. Basierend auf diesen Ergebnissen konnte ich einen plausiblen Faltungsmechanismus für den langsamen Faltungsweg von kalt denaturiertem Barstar skizzieren. Durch Änderung der Zeitparameter des Heizungszyklus wurde erreicht, dass die Tyr47-Pro48-Amidbindung im ungefalteten Zustand in der cis-Konformation bleibt und daher der schnelle Faltungsweg dominant wird. Das Starten des Magnetisierungstransfers vor der Temperaturänderung ermöglichte die Aufzeichnung eines Spektrums, das den entfalteten Zustand mit dem gefalteten Zustand korreliert. Dieses Spektrum ermöglichte quantitative Analysen des schnellen Faltungsweges und lieferte sogar indirekte Hinweise auf einen Zwischenzustand. Diese Methode aus Kombination von schnellem Temperatursprung und Kaltdenaturierung zeigt ein hohes Potenzial, Proteinfaltung auf atomarer Ebene experimentell zu untersuchen und ein tieferes Verständnis verschiedener Faltungswege zu erlangen.
In meinem zweiten Projekt – das Teil einer interdisziplinären Forschung war – konzentrierte ich mich auf die NMR-spektroskopische Charakterisierung von Nukleinsäuren, die mit einer photolabilen Schutzgruppe modifiziert wurden. Zuerst wurde mithilfe homonuklearer Korrelationsexperimente eine vollständige Protonresonanzzuweisung erreicht. Danach wurde die relative Konfiguration der photolabilen Schutzgruppen bestimmt basierend auf einer dreidimensionalen Modellstruktur und spezifischer NOE-Korrelationen. Des Weiteren wurde ein Strukturmodell unter Verwendung von NOE-Einschränkungen berechnet. Dieses Strukturmodell zeigte eine eingeschränkte Rotation um die CN-Bindung zwischen dem Käfig und der Nukleobase. Das Modell zeigte auch, dass der Käfig in der Hauptrille positioniert ist und nicht in das Lösungsmittel herausklappt. Im Vergleich zu einem zuvor charakterisierten NPE-Käfig führte die erhöhte Größe zu einer weiteren Senkung des Schmelzpunkts, zeigte jedoch einen geringeren Schmelzpunktunterschied zwischen der S- und der R-Konfiguration des Käfigs, wobei die S-Konfiguration zu einer größeren Reduktion des Schmelzpunktes führt. Dieser Trend wurde weiter untersucht und durch ein Screening unterstützt. Durch selektive Wasserinversions-Rückgewinnungsexperimente konnte ich auch zeigen, dass der Käfig die lokale Stabilität nur bis zu einer Entfernung von zwei benachbarten Basenpaaren von der Modifikationsstelle verringert. Die NOE-Daten dienten auch als guter Bezugspunkt, um die Qualität molekulardynamischer Simulationen zu testen, mit denen zusätzliche Käfigdesigns untersucht wurden. Die Kombination aus Synthese, NMR-Spektroskopie und MD-Simulationen ermöglichte bis jetzt die detaillierteste Untersuchung des Effekts vom Einbau eines einzelnen Käfigs zur Destabilisierung der DNA-Sekundärstruktur. Dabei wurden Einschränkungen des möglichen Designs aufgedeckt, aber auch die Entwicklung einer neuen, effizienteren Struktur ermöglicht.
Mein drittes Projekt konzentrierte sich auf die Charakterisierung eines RNA-Modellsystems. NMR-spektroskopische Daten von kleinen RNA-Modellsystemen – wie NOE, skalare Kopplungen, kreuzkorrelierte Relaxationsraten und RDC – sind eine unschätzbare Referenz für MD-Simulationen, obwohl die Menge der verfügbaren Literaturdaten – bis jetzt – sehr begrenzt ist. ...