Refine
Year of publication
Document Type
- Doctoral Thesis (25)
- Bachelor Thesis (1)
Language
- English (26) (remove)
Has Fulltext
- yes (26)
Is part of the Bibliography
- no (26)
Keywords
- (n, gamma) Reaktionen (1)
- (n, gamma) reactions (1)
- Activation (1)
- BaF2 Detektor-Array (1)
- BaF2 detector array (1)
- Beam dynamics (1)
- CERN PSB (1)
- Chopper (1)
- Detektor-Array (1)
- Energieauflösung (1)
With the increasing energies and intensities of heavy-ion accelerator facilities, the problem of an excessive activation of the accelerator components caused by beam losses becomes more and more important. Numerical experiments using Monte Carlo transport codes are performed in order to assess the levels of activation. The heavy-ion versions of the codes were released approximately a decade ago, therefore the verification is needed to be sure that they give reasonable results. Present work is focused on obtaining the experimental data on activation of the targets by heavy-ion beams. Several experiments were performed at GSI Helmholtzzentrum für Schwerionenforschung. The interaction of nitrogen, argon and uranium beams with aluminum targets, as well as interaction of nitrogen and argon beams with copper targets was studied. After the irradiation of the targets by different ion beams from the SIS18 synchrotron at GSI, the γ-spectroscopy analysis was done: the γ-spectra of the residual activity were measured, the radioactive nuclides were identified, their amount and depth distribution were detected. The obtained experimental results were compared with the results of the Monte Carlo simulations using FLUKA, MARS and SHIELD. The discrepancies and agreements between experiment and simulations are pointed out. The origin of discrepancies is discussed. Obtained results allow for a better verification of the Monte Carlo transport codes, and also provide information for their further development. The necessity of the activation studies for accelerator applications is discussed. The limits of applicability of the heavy-ion beam-loss criteria were studied using the FLUKA code. FLUKA-simulations were done to determine the most preferable from the radiation protection point of view materials for use in accelerator components.
Studies on the focusing performance of a Gabor lens depending on nonneutral plasma properties
(2013)
The concept of the Gabor lens goes back to an idea by Dennis Gabor, who proposed a magnetron-type trap as an effective diverging lens for electron beams (collecting lens for positive ion beams).
Electrons confined inside the lens volume by orthogonal magnetic and electric fields, create an electric space charge field that causes a radial symmetric focusing force on an ion beam passing through the lens volume.
Since the beginning of the 1990s, a new design of this lens type as well as numerical models to describe the confined plasma cloud have been developed at the Institute for Applied Physics (IAP, Johann Wolfgang Goethe-University Frankfurt).
Thanks to an improved understanding of the plasma confinement as a function of the external fields, two lenses have successfully been tested for low beam currents and remain in operation.
In the scope of this work, the performance of a prototype Gabor lens for the transport of intense, i.e. space charge dominated ion beams, was investigated at the High Current Test Injector (HOSTI) of GSI Helmholtzzentrum für Schwerionenforschung GmbH for the first time.
To ensure an optimal focusing performance of the Gabor lens a homogeneous and stable electron confinement is required. Therefore, new non-interceptive diagnostic methods were developed to investigate the parameters and state of the confined nonneutral plasma column as a function of the external fields.
An essential part of the studies was the time-resolved diagnostic of an occurring plasma instability and the determination of the electron temperature via optical spectroscopy. The latter necessitated the detailed investigation of atomic excitation as well as the measurement of optical-emission cross sections.
A comparison of the results from both experiments i.e. the beam transport measurements at GSI and the diagnostic experiments performed at IAP concerning the plasma state, gave first indications of possible interaction processes between the nonneutral plasma and the ion beam.
Studies and measurements of linear coupling and nonlinearities in hadron circular accelerators
(2006)
In this thesis a beam-based method has been developed to measure the strength and the polarity of corrector magnets (skew quadrupoles and sextupoles) in circular accelerators. The algorithm is based on the harmonic analysis (via FFT) of beam position monitor (BPM) data taken turn by turn from an accelerator in operation. It has been shown that, from the differences of the spectral line amplitudes between two consecutive BPMs, both the strength and the polarity of non-linear elements placed in between can be measured. The method has been successfully tested using existing BPM data from the SPS of CERN, since presently the SIS-18 is not equipped with the necessary hardware. The magnet strength of seven SPS extraction sextupoles was measured with a precision of about 10%. The polarities have been unambiguously measured. This method can be used to detect polarity errors and wrong power supply connections during machine commissioning, as well as for a continuous monitoring of the "nonlinearity budget" in superconducting machines. A second beam-based method has been studied for a fast measurement and correction of betatron coupling driven by skew quadrupole field errors and tilted focusing quadrupoles. Traditional methods usually require a time-consuming scan of the corrector magnets in order to minimize the coupling stop band |C|. In this thesis it has been shown how the same correction can be performed in a single machine cycle from the harmonic analysis of multi-BPM data. The method has been successfully applied to RHIC. It has been shown that the stop band |C| (also known in the American literature as Delta-Qmin) measured in a single machine cycle with the new algorithm is compatible with the value obtained by traditional methods. The measurement of the resonance phase Theta defines automatically the best corrector setting, which was found in agreement with the one obtained with a traditional scan. A third theoretical achievement is a new description of the betatron motion close to the difference resonance in presence of linear coupling. Compared to the matrix formalism the motion is parametrized as a function of the resonance driving term f1001 only (which is proven to be an observable), whereas making use of the matrix approach four parameters need to be measured. Formulae describing the exchange of RMS emittances when approaching the resonances have been already derived in the 70s in the smooth approximation. New formulae have been derived here making use of Lie algebra providing a better description of the emittance behavior. The emittance exchange curves are predicted by new formulae with excellent agreement with multi-particle simulations and the counter-intuitive emittance variation along the ring of the emittance is proven to be related to the variation of f1001. A new way to decouple the equations of motion and explicit expressions for the individual single particle invariants have been found. For the first time emittance exchange studies have been carried out in the SIS-18 of GSI. Transverse RMS emittances have been measured during 2005 from rest gas monitor (RGM) data. Crossing the linear coupling resonance, the transverse emittances exchange completely. It has been observed that this effect is reversible. Applications of this manipulation are: emittance equilibration under consideration for future operations of the SIS-18 as booster for the SIS-100; emittance transfer during multi-turn injection to improve the eficiency and to protect the injection septum in high intensity operations, by shifting part of the horizontal emittance into the vertical plane. The emittance exchange curves obtained experimentally have been compared with analytic formulae providing a fast measurement (in few machine cycles only) of the linear coupling stop band |C|. Technical problems prevented the use of the eight skew quadrupoles installed in the SIS-18 to compensate the linear coupling resonance. It has been observed that the emittance exchange curve is highly sensitive to the beam intensity. Multi-particle simulations with 2D PIC space-charge solver have been run to infer heuristic scaling laws able to quantify the observable stop band, to be used for the resonance compensation. The analysis of BPM and RGM data has been performed making use of new software applications developed for this purpose. The bpm2rdt code for the harmonic analysis of BPM data has been written and tested with real data. The software reads the BPM turn-by-turn data and the Twiss parameters. Then it performs the FFT of these data, finds the peaks of the Fourier spectra and infers the RDT fjklm, the strengths ^hjklm and the local terms lambda-jklm. All these observables are printed out together with the corresponding values of the model, computed from the nominal values of strengths and the Twiss parameters. From the FFT of dual-plane BPM data the linear optics (beta functions and phase advances Delta phi) at the corresponding location is also inferred. From the measurement of f1000, the linear coupling coeffcient C (amplitude and phase) is also computed. The code has been tested by using existing SPS data and new RHIC data. For the on-line analysis of RGM data the rgm2emitt code has been written. The application reads in input the raw data files from the RGM and the beam loss monitor (BLM) respectively, the latter created by the RGM on-line software itself. From the RGM data the transverse beam sizes and emittances are inferred and used together with the BLM data to compute the tune shift during the machine cycle.
Precise tune determination and split beam emittance reconstruction at the CERN PS synchrotron
(2023)
In accelerator physics, the need to improve the performance and better control the operating point of an accelerator has become, year after year, an increasingly important need in order to achieve higher energies and brightness, as well as point-like particle beams. If this involves increasingly advanced technological developments (in terms, for example, of materials for more intense superconducting magnets), it can not take place in the absence of targeted studies of linear and non-linear beam dynamics. In the context of this Ph.D. thesis in physics, linear and non-linear dynamics of charged particles in circular accelerators is the topic that will be discussed and treated in detail. In particular, the presentation and discussion of the results will be divided in two main topics: the need to know the physical properties of a proton beam; and the development of innovative methods to determine and study the accelerator’s working point. With regard to the first topic, an innovative procedure will be presented to determine the transverse size of the PS beam in the beam extraction phase. Among the different ways the extraction occurs at the PS, the analysed one is based on the transverse splitting of the beam by means of non-linear fields. Thus, the knowledge of the transverse beam size is not trivial since resonant linear and non-linear beam structures (namely, core and islands) arise and, for each of them, the beam size has to be quantified. This parameter is crucial for two main reasons: the accelerator that will receive the beam exiting the upstream accelerator may have restrictions (physical or magnetic) that involve a partial or total loss of the incoming beam; and any experiments located downstream of the considered accelerator may need a beam with a transversal size as constant as possible; consequently, its monitoring and control are essential. The second topic concerns the accurate determination of the working point of an accelerator, defined as the number of transverse oscillations the particle beam travels per unit of accelerator circumference, both horizontally and vertically. This quantity is called horizontal and vertical tune, respectively. Their knowledge is also crucial to understand whether the beam will be stable or unstable. In fact, not all tune values are acceptable, as there are particular values that bring the beam into resonance. In this configuration, the amplitude of the transverse oscillations of the particles increases in an uncontrolled manner and leads to the loss of all or part of the beam. Note that, in particular operating conditions, the resonant conditions are sought and desired to model, in a suitable way, the transversal shape of the beam, such as the above mentioned PS extraction scheme. It is even clearer how much the determination of the machine working point is essential to determine the operating conditions of an accelerator. In this context, several methods (also taken from the field of applied mathematics) to calculate the tune will be demonstrated and tested numerically on different types of synthetic signals. At the end of this description, the use of experimental data will allow to obtain the benchmark of a new method for the direct calculation of some characteristic quantities of non-linear beam dynamics (namely, the amplitude detuning, i.e. the variation of tune as a function of intensity of the perturbation provided to the beam.
In the framework of the LHC Injectors Upgrade Project (LIU), the CERN Proton Synchrotron Booster (PSB) went through major upgrades resulting in new effects to study, challenges to overcome and new parameter regimes to explore. To assess the achievable beam brightness limit of the machine, a series of experimental and computational studies in the transverse planes were performed. In particular, the new injection scheme induces optics perturbations that are strongly enhanced near the half-integer resonance. In this thesis, methods for dynamically measuring and correcting these perturbations and their impact on the beam performance will be presented. Additionally, the quality of the transverse beam distributions and strategies for improvement will be addressed. Finally, the space charge effects when dynamically crossing the half-integer resonance will be characterized. The results of these studies and their broader significance beyond the PSB will be discussed.
A synchrotron is a particular type of cyclic particle accelerator and the first accelerator concept to enable the construction of large-scale facilities [10], such as the largest particle accelerator in the world, the 27-kilometre-circumference Large Hadron Collider (LHC) by CERN near Geneva, Switzerland, the European Synchrotron Radiation Facility (ESRF) in Grenoble, France for the synchrotron radiation, the superconducting, heavy ion synchrotron SIS100 under construction for the FAIR facility at GSI, Darmstadt, Germany and so on. Unlike a cyclotron, which can accelerate particles starting at low kinetic energy, a synchrotron needs a pre-acceleration facility to accelerate particles to an appropriate initial value before synchrotron injection. A pre-acceleration can be realized by a chain of other accelerator structures like a linac, a microtron in case of electrons, for example, Proton and ion injectors Linac 4 and Linac 3 for the LHC, UNLAC as the injector for the SIS18 in GSI and in future the SIS18 as injector for the SIS100. The linac is a commonly used injector for the ion synchrotron and consists of some key components. The three main parts of a linac are: An ion source creating the particles, a buncher system or an RFQ followed by the main drift tube accelerator DTL. In order to meet the energy and the beam current requirement of a synchrotron injector linac, its cost is a remarkable percentage of the total facility costs.
However, the normal conducting linac operation at cryogenic temperatures can be a promising solution in improving the efficiency and reducing the costs of a linac. Synchrotron injectors operate at very low duty factor with beam pulse lengths in 1 micros to 100 micros range, as most of the time is needed to perform the synchrotron cycle. Superconducting linacs are not convenient, as they cannot efficiently operate at low duty factor and high beam currents.
The cryogenic operation of ion linacs is discussed and investigated at IAP in Frankfurt since around 2012 [1, 37]. The motivation was to develop very compact synchrotron injectors at reduced overall linac costs per MV of acceleration voltage. As the needed beam currents for new facilities are increasing as well, the new technology will also allow an efficient realization of higher injector linac energies, which is needed in that case. Operating normal conducting structures at cryogenic temperature exploits the significantly higher conductivity of copper at temperatures of liquid nitrogen and below. On the other hand, the anomalous skin effect reduces the gain in shunt impedance quite a bit[25, 31, 9]. Some intense studies and experiments were performed recently, which are encouraging with respect to increased field levels at linac operation temperatures between 30 K and 70 K [17, 24, 4, 23, 5, 8]. While these studies are motivated by applications in electron acceleration at GHz-frequencies, the aim of this paper is to find applications in the 100 to 700 MHz range, typical for proton and ion acceleration. At these frequencies, a higher impact in saving RF power is expected due to the larger skin depth, which is proportional to the frequency to the power of negative half with respect to the normal skin effect. On the other hand, it is assumed that the improvement in maximum surface field levels will be similar to what was demonstrated already for electron accelerator cavities. This should allow to find a good compromise between reduced RF power needs for achieving a given accelerator voltage and a reduced total linac length to save building costs.
A very important point is the temperature stability of the cavity surface during the RF pulse. This is of increasing importance the lower the operating temperature is chosen: the temperature dependence of the electric conductivity in copper gets rather strong below 80 K, as long as the RRR - value of the copper is adequate. It is very clear, that this technology is suited for low duty cycle operated cavities only - with RF pulse lengths below one millisecond. At longer pulses the cavity surface will be heated within the pulse to temperatures, where the conductivity advantage is reduced substantially. These conditions fit very well to synchrotron injectors or to pulsed beam power applications.
H – Mode structures of the IH – and of the CH – type are well-known to have rather small cavity diameters at a given operating frequency. Moreover, they can achieve effective acceleration voltage gains above 10 MV/m even at low beam energies, and already at room temperature operation[29]. With the new techniques of 3d – printing of stainless steel and copper components one can reduce cavity sizes even further – making the realization of complex cooling channels much easier.
Another topic are copper components in superconducting cavities – like power couplers. It is of great importance to know exactly the thermal losses at these surfaces, which can’t be cooled efficiently in an easy way.
This thesis is structured into 7 chapters:
• Chapter 2 gives an overview of the ultrashort high intensity laser interaction with matter. The laser interaction with an induced plasma is described, starting from the kinematics of single electron motion, followed by collective electron effects and the ponderamotive motion in the laser focus and the plasma transparency for the laser beam. The three different mechanisms prepared to accelerate and propagate electrons through matter are discussed. The following indirect acceleration of protons is explained by the Target Normal Sheath Acceleration (TNSA) mechanism. Finally some possible applications of laser accelerated protons are explained briefly.
• Chapter 3 deals with the modeling of geometry and field mapping of magnetic lens. Initial proton and electron distributions, fitted to PHELIX measured data are generated, a brief description of employed codes and used techniques in simulation is given, and the aberrations at the solenoid focal spot is studied.
• Chapter 4 presents a simulation study for suggested corrections to optimize the proton beam as a later beam source. Two tools have been employed in these suggested corrections, an aperture placed at the solenoid focal spot as energy selection tool, and a scattering foil placed in the proton beam to smooth the radial energy beam profile correlation at the focal spot due to chromatic aberrations. Another suggested correction has been investigated, to optimize the beam radius at the focal spot by lens geometry controlling.
• Chapter 5 presents a simulation study for the de-neutralization problem in TNSA caused by the fringing fields of pulsed magnetic solenoid and quadrupole. In this simulation, we followed an electrostatic model, wherethe evolution of both, self and mutual fields through the pulsed magnetic solenoid could be found, which is not the case in the quadrupole and only the growth of self fields could be found. The field mapping of magnetic elements is generated by the Matlab program, while the TraceWin code is employed to study the tracking through magnetic elements.
• Chapter 6 describes the PHELIX laser parameters at GSI with chirp pulse amplification technique (CPA), and Gafchromic Radiochromic film RCF) as a spatial energy resolver film detector. The results of experiments with laser proton acceleration, which were performed in two experimental areas at GSI (Z6 area and PHELIX Laser Hall (PLH)), are presented in section 6.3.
• Chapter 7 includes the main results of this work, conclusions and gives a perspective for future experimental activities.
In the framework of this thesis the intense low energy ion beam transport was investigated. Especially, the beam transport in toroidal magnetic field configurations was discussed, as it may allow the accumulation of high intensive beams in the future. One of the specific tasks is to design an injection system that can be used for the proposed low energy accumulator ring. This thesis regarding beam transport investigations is related to the larger research fields, storage rings used in accelerator physics and non-neutral plasmas. The proposal of building a storage ring with longitudinal guiding magnetic fields was made. Due to natural transversal focussing in magnetic fields it is possible to accumulate very intense charged particle beams, a subject of interest within the physics community. A simulation code (TBT) was written to describe the particle motion in curved segments. Particle in Cell techniques were utilized to simulate a multi particle dynamics. This code allows the user to generate different particle distributions as input parameter. A possibility of reading an external data file was made available so that a measured distribution can be used to compare simulation results with measured ones. A second order cloud in cell method was used to calculate charge density and in turn to solve Poisson’s equation. The circular toroidal coordinate system was used. The drift motion and gyrating motion was proved to be consistent with analytical values. Further simulations were performed to study the self field effects on beam transport. The experiments with single toroidal segments find niche in the work. The experiments were performed to compare the simulation results and gain practical experience. The toroidal segment has similar dimensions (major axis R = 1:3 m, minor axis r = 0:1 m, arc angle 30°) as for a full scale ring design. The main difference lies in the magnetic field strength. The available segments can be operated at room temperature producing 0:6T on axis maximum magnetic field, while for the storage ring design this value is in the range of 5T. The preparatory experiments consisted of building and characterization of the ion source in a first step. Along with the momentum spectrometer and emittance scanner the beam properties were studied. Low mass ion beams He+ and mixed p, H2+, H3+ beams were analyzed. The proton beam consisting of a 48% H+ fraction was extracted regularly and used for further experiments. A moderate beam energy of 10 keV was chosen as operational energy for which 3.08 mA proton beam current was measured. In the second stage, beams were transported through a solenoid and the phase space distribution was measured as a function of the magnetic field for different beam energies. The phase-space as distributions measured in a first stage were simulated backward and then again forward transported through the solenoid. The simulated results were then compared with the measured distribution. The LINTRA transport program was used. The phase-space distribution was further simulated for transport experiments in a toroidal magnetic field. The experiments with a single toroidal segment give basic results necessary to compare the results between transport code (TBT) and measurements. The optical diagnostic provides measurements which can be well compared with the simulated results. A digital camera with a magnetic shield was used to record images in jpeg file format. A subroutine was written to analyze an image file to give the intensity distribution of a given image file. The integrated profile in vertical and horizontal direction was used to calculate the vertical drift and the beam size. The simulated values were in good agreement with the measured ones. The injection system needs most care. The transport program that was used to simulate the beam in the toroid was also used to design the injection system. The injection system with its special field configurations was designed to perform experiments with room temperature segments. The main point to tackle was to smoothly bring the charged particles generated outside the trap into the acceptance of the ring. The designed system consists of two sources, one representing a ring beam and the other one the injection beam. While simulations showed a clear way, how to inject the particle beam via a well positioned solenoid and in combination with a transverse electric field element causing an ExB drift into the main ring acceptance. After construction of these injection elements it will be very important to measure the robustness of such a system with respect to the beam stability- especially of the injection channel.