Universitätspublikationen
Refine
Year of publication
- 2009 (34) (remove)
Document Type
- Article (23)
- Conference Proceeding (5)
- Book (2)
- Doctoral Thesis (2)
- Bachelor Thesis (1)
- Part of Periodical (1)
Has Fulltext
- yes (34)
Is part of the Bibliography
- no (34)
Keywords
- 2,4,7,9-tetramethyl-5-decyne-4,7-diol (1)
- Buckingham’s π-theorem (1)
- Innovationsprozesse (1)
- Monin-Obukhov scaling (1)
- Prandtl-Obukhov-Priestley scaling (1)
- Quantification (1)
- River Rhine (1)
- Solid-phase extraction (1)
- Surfactants (1)
- TMDD (1)
Institute
- Geowissenschaften (34) (remove)
An eclogite barometer has profound importance in the study of upper mantle processes and potential application to diamond prospecting. Studies on the partitioning of Li between clinopyroxene (cpx) and garnet (grt) in natural samples have shown that this particular element is very sensitive to changes in pressure and could be calibrated as the barometer demanded for bimineralic eclogites. Experiments were performed from 4 to 13 GPa and 1100 to 1400°C in the CMAS (CaO, MgO, Al2O3, SiO2) system with Li added as Li3PO4 to quantify this pressure dependence into a barometer expressed in the following equation: P= (0.00255*T-lnKd)/0.2351 where P is in GPa, T is in °C and Kd is defined as the partition coefficient of Li (in ppm) between clinopyroxene and garnet. The experimental pressures are reproduced to ± 0.38 GPa (1σ) by this equation. This barometer is strictly applicable only to CMAS. Experiments at 1300°C, 8-12 GPa showed that Henry’s Law is fulfilled for Li partitioning between cpx and grt in the concentration range of approximately 0.01 – 1 wt% Li. Direct application of the equation to experiments in natural systems performed at 1300°C from 4 GPa to 13 GPa consistently overestimates pressures by approximately 2 GPa. Our previous experiments in the system CaO-MgO-Al2O3-SiO2 + Li3PO4 showed that the partitioning of Li between garnet and clinopyroxene is pressure dependent in eclogitic bulk compositions. This supports experimentally the hypothesis of Seitz et al. (2003), based on the analysis of Li in eclogitic xenoliths and inclusions in diamond, that the partitioning of this particular element between clinopyroxene and garnet is very sensitive to changes in pressure and could be calibrated as a barometer for bimineralic eclogites. In order to calibrate this pressure dependence into a barometer, experiments were performed in natural systems using starting materials sourced from a well preserved eclogitic xenolith from the Roberts Victor kimberlite pipe (South Africa) to extrapolate our findings in CMAS to natural systems. Sixteen multianvil experiments were performed from 4-13 GPa and 1100-1500°C. Our findings reinforced the general trend we observed in the CMAS system, that KdLi cpx-grt for Li decreases with increasing P, and that at P ≥ 12 GPa, garnet is able to incorporate more Li than clinopyroxene. Multiple linear regression was applied to our experimental results to create the barometer: P = (0.000963*T – ln KdLi cpx-grt + 1.581) / 0.252 Where P is pressure in GPa, T is temperature in °C and KdLi cpx-grt is defined as the partitioning coefficient of Li obtained by dividing the concentration of Li in cpx by the concentration of Li in garnet. This barometer reproduces the experimental conditions to ± 0.2 GPa. It is applicable to eclogitic xenoliths, to garnet pyroxenites and to peridotitic and eclogitic inclusions in diamond. Application of the barometer to diamond bearing xenoliths results in pressures in the diamond stability field. Clinopyroxene is easily corrupted in xenoliths and also preferentially takes in Li during short lived metasomatic processes. Care must be taken therefore to analyse primary, unaltered clinopyroxene. Our preliminary application to natural samples shows that the barometer can be applied beyond the experimental range to pressures down to 3 GPa. Seventeen eclogitic xenoliths were chosen from a sample set of greater than 200 for their fresh microscopic and macroscopic appearance and were analyzed for Li content in coexisting garnet (grt) and clinopyroxene (cpx). These samples can be subdivided into two groups on the basis of Mg in cpx (cpfu: cations per formula unit, based on 6 oxygens): Group 1 with Mg > 0.75, and Group 2 with Mg < 0.75. Group 1 xenoliths show lower Li contents in both grt and cpx compared to Group 2. The Li barom ter calibrated in Hanrahan et al. (2009b)/Chapter 3 was applied to these samples as well as available literature data to obtain pressures of provenance - Group 2 xenoliths often provide pressures that appear unrealistic for eclogitic xenoliths. In light of observed crystal chemical relations in the natural samples, a new fitting procedure was applied to the experimental data presented in Chapter 3. This new fit appears to be more realistic than the previous fit, although a strong relationship with Mg# remains present, suggesting that Li-barometry is, at present, only applicable to Mg-rich eclogites. Inclusions in diamond, with the exception of eclogitic inclusions of coexisting majorite and cpx, often yield pressures that are inconsistent with the pressures required for diamond formation. Although an interesting observation when comparing all of the data is that inclusions in diamond have significantly higher average Li concentrations compared to xenoliths, which suggests that Li is highly present in the fluids from which diamonds form in the mantle, an observation which was previously made for the deep mantle as a result of high Li in ferropericlase inclusions in diamond (Seitz et al. 2003).
In this study, I investigate the crustal and upper mantle velocity structure beneath the Rwenzori Mountains in western Uganda. This mountain range is situated within the western branch of the East African Rift and reaches altitudes of more than 5000 m. I use four different approaches that belong to the travel-time tomography method. The first approach is based on the isotropic tomographic inversion of local data, which contain information about 2053 earthquakes recorded by a network of up to 35 stations covering an area of 140×90 km2. The LOTOS-09 algorithm described here is used to realize this approach. The second approach is based on the anisotropic tomographic inversion of the same local dataset. This method employs the tomographic code ANITA, developed with my participation, which provides 3D anisotropic P and isotropic S velocity distributions based on P and S travel-times from local seismicity. For the P anisotropic model, four parameters for each parameterization cell are determined. This represents an orthorhombic anisotropy with one vertically-oriented predefined direction. Three of the parameters describe slowness variations along three horizontal orientations with azimuths of 0°, 60° and 120°, and one is a perturbation along the vertical axis. The third approach is based on tomographic inversion of the teleseismic data, which contain information about the traveltimes of P-waves coming from 284 teleseismic events recorded by the seismic network stations. The TELELOTOS code, which is my own modification of the LOTOS-09 algorithm, is used in this approach. The TELELOTOS code is designed to iteratively invert the local and/or teleseismic datasets. Finally, I present the results of the new tomographic approach, which is based on the simultaneous inversion of the joint local and teleseismic data. The simultaneous use of these datasets for the tomographic inversion has several advantages. In this case, the velocity structure in the study area can be resolved as deep as in the teleseismic approach. At the same time, in the upper part of the study volume, the resolution of the obtained models is as good as in the local tomography. The TELELOTOS algorithm is used to perform the joint tomographic inversion. Special attention is paid in this work to synthetic testing. A number of different synthetic and real data tests are performed to estimate the resolution ability and robustness of the obtained models. In particular, synthetic tests have shown that the results of the anisotropic tomographic inversion of the local data have to be considered as unsatisfactory. For all approaches used in this study, I present synthetic models that reproduce the same pattern of anomalies as that obtained by inverting the real data. These models are used to interpret the results and estimate the real amplitudes of the obtained anomalies. The obtained models exhibit a relatively strong negative P anomaly (up to -10%) beneath the Rwenzori Mountains. Low velocities are found in the northeastern part of the array at shallower depths and are most likely related to sedimentary deposits, while higher velocities are found beneath the eastern rift shoulder and are thought to be related to old cratonic crust. The presence of low velocities in the northwestern part of the array may be caused by a magmatic intrusion beneath the Buranga hot springs. Relatively low velocities were observed within the lower crust and upper mantle in the western and southern parts of the study area (beneath the rift valley and the entire length of the Rwenzori range). The higher amplitude of the low-velocity anomaly in the south can be related to the thinner lithosphere in the southern part of the Albertine rift. In the center of the study area, a small negative anomaly is observed, with the intensity increasing with depth. This anomaly is presumably related to a fluids rising up from a plume branch in the deeper part of the mantle. According to the interpretation of the local earthquake distribution, the Rwenzori Mountains are located between two rift valleys with flanks marked by normal faults. The Rwenzori block is bounded by thrust faults that are probably due to compression.
Medium range hydrological forecasts in mesoscale catchments are only possible with the use of hydrological models driven by meteorological forecasts, which in particular contribute quantitative precipitation forecasts (QPF). QPFs are accompanied by large uncertainties, especially for longer lead times, which are propagated within the hydrometeorological model system. To deal with this limitation of predictability, a probabilistic forecasting system is tested, which is based on a hydrological-meteorological ensemble prediction system. The meteorological component of the system is the operational limited-area ensemble prediction system COSMO-LEPS that downscales the global ECMWF ensemble to a horizontal resolution of 10 km, while the hydrological component is based on the semi-distributed hydrological model PREVAH with a spatial resolution of 500 m.
Earlier studies have mostly addressed the potential benefits of hydrometeorological ensemble systems in short case studies. Here we present an analysis of hydrological ensemble hindcasts for two years (2005 and 2006). It is shown that the ensemble covers the uncertainty during different weather situations with an appropriate spread-skill relationship. The ensemble also shows advantages over a corresponding deterministic forecast, even under consideration of an artificial spread.
Background, aim, and scope: The chemical substance 2,4,7,9-tetramethyl-5-decyne-4,7-diol (TMDD) is a non-ionic surfactant used as an industrial defoaming agent and in various other applications. Its commercial name is Surynol 104® and the related ethoxylates are also available as Surfynol® 420, 440, 465 and 485 which are characterized by different grades of ethoxylation of TMDD at both hydroxyl functional groups. TMDD and its ethoxylates offer several advantages in waterborne industrial applications in coatings, inks, adhesives as well as in paper industries. TMDD and its ethoxylates can be expected to reach the aquatic environment due its widespread use and its physico-chemical properties. TMDD has previously been detected in several rivers of Germany with concentrations up to 2.5 µg/L. In the United States, TMDD was also detected in drinking water. However, detailed studies about its presence and distribution in the aquatic environment have not been carried out so far. The aim of the present study was the analysis of the spatial and temporal concentration variations of TMDD in the river Rhine at the Rheingütestation Worms (443.3 km). Moreover, the transported load in the Rhine was investigated during two entire days and 7 weeks between November 2007 and January 2008.
Materials and methods: The sampling was carried out at three different sampling points across the river. Sampling point MWL1 is located in the left part of the river, MWL2 in the middle part, and MWL4 in the right part. One more sampling site (MWL3) was run by the monitoring station until the end of 2006, but was put out of service due to financial constrains. The water at the left side of the river Rhine (MWL1) is influenced by sewage from a big chemical plant in Ludwigshafen and by the sewage water from this city. The water at the right side of the river Rhine (MWL4) is largely composed of the water inflow from river Neckar, discharging into Rhine 14.9 km upstream from the sampling point and of communal and industrial wastewater from the city Mannheim. The water from the middle of the river (MWL2) is largely composed of water from the upper Rhine. Water samples were collected in 1-L bottles by an automatic sampler. The water samples were concentrated by use of solid-phase extraction (SPE) using Bond Elut PPL cartridges and quantified by use of gas chromatography-mass spectrometry (GC-MS). The quantification was carried out with the internal standard method. Based on these results, concentration variations were determined for the day profiles and week profiles. The total number of analyzed samples was 219.
Results: The results of this study provide information on the temporal concentration variability of TMDD in river Rhine in a cross section at one particular sampling point (443.3 km). TMDD was detected in all analyzed water samples at high concentrations. The mean concentrations during the 2 days were 314 ng/L in MWL1, 246 ng/L in MWL2, and 286 ng/L in MWL4. The variation of concentrations was low in the day profiles. In the week profiles, a trend of increasing TMDD concentrations was detected particularly in January 2008, when TMDD concentrations reached values up to 1,330 ng/L in MWL1. The mean TMDD concentrations during the week profiles were 540 ng/L in MWL1, 484 ng/L in MWL2, and 576 ng/L in MWL4. The loads of TMDD were also determined and revealed to be comparable in all three sections of the river. The chemical plant located at the left side of the Rhine is not contributing additional TMDD to the river. The load of TMDD has been determined to be 62.8 kg/d on average during the entire period. By extrapolation of data obtained from seven week profiles the annual load was calculated to 23 t/a.
Discussion: The permanent high TMDD concentrations during the investigation period indicate an almost constant discharge of TMDD into the river. This observation argues for effluents of municipal wastewater treatment plants as the most likely source of TMDD in the river. Another possible source might be the degradation of ethoxylates of TMDD (Surfynol® series 400), in the WWTPs under formation of TMDD followed by discharge into the river. TMDD has to be considered as a high-production-volume (HPV) chemical based on the high concentrations found in this study. In the United States, TMDD is already in the list of HPV chemicals from the Environmental Protection Agency (EPA). However, the amount of TMDD production in Europe is unknown so far and also the biodegradation rates of TMDD in WWTPs have not been investigated.
Conclusions: TMDD was found in high concentrations during the entire sampling period in the Rhine river at the three sampling points. During the sampling period, TMDD concentrations remained constant in each part of the river. These results show that TMDD is uniformly distributed in the water collected at three sampling points located across the river. ‘Waves’ of exceptionally high concentrations of TMDD could not be detected during the sampling period. These results indicate that the effluents of WWTPs have to be considered as the most important sources of TMDD in river Rhine.
Recommendations and perspectives: Based also on the occurrence of TMDD in different surface waters of Germany with concentrations up to 2,500 ng/L and its presence in drinking water in the USA, more detailed investigations regarding its sources and distribution in the aquatic environment are required. Moreover, the knowledge with respect to its ecotoxicity and its biodegradation pathway is scarce and has to be gained in more detail. Further research is necessary to investigate the rate of elimination of TMDD in municipal and industrial wastewater treatment plants in order to clarify the degradation rate of TMDD and to determine to which extent effluents of WWTPs contribute to the input of TMDD into surface waters. Supplementary studies are needed to clarify whether the ethoxylates of TMDD (known as Surfynol 400® series) are hydrolyzed in the aquatic environment resulting in formation of TMDD similar to the well known cleavage of nonylphenol ethoxylates into nonylphenols. The stability of TMDD under anaerobic conditions in groundwater is also unknown and should be studied.
In this paper, similarity hypotheses for the atmospheric surface layer (ASL) are reviewed using nondimensional characteristic invariants, referred to as π -numbers. The basic idea of this dimensional π-invariants analysis (sometimes also called Buckingham’s π-theorem) is described in a mathematically generalized formalism. To illustrate the task of this powerful method and how it can be applied to deduce a variety of reasonable solutions by the formalized procedure of non-dimensionalization, various instances are represented that are relevant to the turbulence transfer across the ASL and prevailing structure of ASL turbulence. Within the framework of our review we consider both (a) Monin-Obukhov scaling for forced-convective conditions, and (b) Prandtl-Obukhov-Priestley scaling for free-convective conditions.It is shown that in the various instances of Monin-Obukhov scaling generally two π-numbers occur that result in corresponding similarity functions. In contrast to that, Prandtl-Obukhov-Priestley scaling will lead to only one π number in each case usually considered as a non-dimensional universal constant. Since an explicit mathematical relationship for the similarity functions cannot be obtained from a dimensional π-invariants analysis, elementary laws of π-invariants have to be pointed out using empirical or/and theoretical findings. To evaluate empirical similarity functions usually considered within the framework flux-profile relationships, so-called integral similarity functions for momentum and sensible heat are presented and assessed on the basis of the friction velocity and the vertical component of the eddy flux densities of sensible and latent heat directly measured during the GREIV I 1974 field campaign.
Abrupt climate changes of the last deglaciation detected in a western Mediterranean forest record
(2009)
Abrupt changes in Western Mediterranean climate during the last deglaciation (20 to 6 cal ka BP) are detected in marine core MD95-2043 (Alboran Sea) through the investigation of high-resolution pollen data and pollen-based climate reconstructions by the modern analogue technique (MAT) for annual precipitation (Pann) and mean temperatures of the coldest and warmest months (MTCO and MTWA). Changes in temperate Mediterranean forest development and composition and MAT reconstructions indicate major climatic shifts with parallel temperature and precipitation changes at the onsets of Heinrich stadial 1 (equivalent to the Oldest Dryas), the Bölling-Allerød (BA), and the Younger Dryas (YD). Multi-centennial-scale oscillations in forest development occurred throughout the BA, YD, and early Holocene. Shifts in vegetation composition and (Pann reconstructions indicate that forest declines occurred during dry, and generally cool, episodes centred at 14.0, 13.3, 12.9, 11.8, 10.7, 10.1, 9.2, 8.3 and 7.4 cal ka BP. The forest record also suggests multiple, low-amplitude Preboreal (PB) climate oscillations, and a marked increase in moisture availability for forest development at the end of the PB at 10.6 cal ka BP. Dry atmospheric conditions in the Western Mediterranean occurred in phase with Lateglacial events of high-latitude cooling including GI-1d (Older Dryas), GI-1b (Intra-Allerød Cold Period) and GS-1 (YD), and during Holocene events associated with high-latitude cooling, meltwater pulses and N. Atlantic ice-rafting. A possible climatic mechanism for the recurrence of dry intervals and an opposed regional precipitation pattern with respect to Western-central Europe relates to the dynamics of the westerlies and the prevalence of atmospheric blocking highs. Comparison of radiocarbon and ice-core ages for well-defined climatic transitions in the forest record suggests possible enhancement of marine reservoir ages in the Alboran Sea by 200 years (surface water age 600 years) during the Lateglacial.