Universitätspublikationen
Refine
Year of publication
- 2011 (52) (remove)
Document Type
- Article (38)
- Doctoral Thesis (6)
- Diploma Thesis (3)
- Book (2)
- Conference Proceeding (2)
- Part of Periodical (1)
Has Fulltext
- yes (52)
Is part of the Bibliography
- no (52) (remove)
Keywords
- Centrifuge modeling (1)
- IRSL (1)
- Indonesia (1)
- SFAP (1)
- UAV (1)
- Weilbach (1)
- bank filtration (1)
- boride (1)
- botryococcus braunii (1)
- carbide (1)
Institute
- Geowissenschaften (52) (remove)
Residual circulation trajectories and transit times into the extratropical lowermost stratosphere
(2011)
Transport into the extratropical lowermost stratosphere (LMS) can be divided into a slow part (time-scale of several months to years) associated with the global-scale stratospheric residual circulation and a fast part (time-scale of days to a few months) associated with (mostly quasi-horizontal) mixing (i.e. two-way irreversible transport, including extratropical stratosphere-troposphere exchange). The stratospheric residual circulation may be considered to consist of two branches: a deep branch more strongly associated with planetary waves breaking in the middle to upper stratosphere, and a shallow branch associated with synoptic and planetary scale waves breaking in the subtropical lower stratosphere. In this study the contribution due to the stratospheric residual circulation alone to transport into the LMS is quantified using residual circulation trajectories, i.e. trajectories driven by the (time-dependent) residual mean meridional and vertical velocities. This contribution represents the advective part of the overall transport into the LMS and can be viewed as providing a background onto which the effect of mixing has to be added. Residual mean velocities are obtained from a comprehensive chemistry-climate model as well as from reanalysis data. Transit times of air traveling from the tropical tropopause to the LMS along the residual circulation streamfunction are evaluated and compared to recent mean age of air estimates. A time-scale separation with much smaller transit times into the mid-latitudinal LMS than into polar LMS is found that is indicative of a separation of the shallow from the deep branch of the residual circulation. This separation between the shallow and the deep circulation branch is further manifested in a distinction in the aspect ratio of the vertical to meridional extent of the trajectories, the integrated mass flux along the residual circulation trajectories, as well as the stratospheric entry latitude of the trajectories. The residual transit time distribution reproduces qualitatively the observed seasonal cycle of youngest air in the extratropical LMS in fall and oldest air in spring.
In this thesis, laboratory investigations have been conducted to investigate several processes occurring during the melt segregation (crystal settling and compaction processes), as well as during emplacement of plutons. With the help of three different sets of centrifuge experiments rates of these three magmatic processes have been evaluated. In the first series of the centrifuge experiments, the diapiric ascent of buoyant material from two source layers at different depths was studied. Through five models, the hypothesis of ascending diapirs was tested and it was demonstrated whether a rising diapir ascends straight upward or if its ascent might be deviated by another buoyant, softer – and consequently easier to travel through – layer which is located within the overburden strata. We were interested under which conditions they can be formed. For this purpose we placed perturbations on top of both the buoyant layers; either with a set-off of both the protrusions (for three of these experiments), or with both protrusion sitting directly on top of each other (for one of the experiments). In the first experiment, we omitted the perturbations, to test which pathways diapirs take which grow from natural Rayleigh-Taylor instabilities. Three others experiments differed in the viscosity contrast between the overburden and the buoyant material. Through the experimental runs, the effects of different overburden viscosities and perturbation positions on the number of the diapirs were observed. The modeling results show that two diapirs rising from the offset perturbations do not take the same pathway through the overburden layer. Rather, each diapir takes a different pathway, with the deeper diapir piercing through its overburden while rising, regardless if it was a buoyant layer or denser overburden layers. However, when the two perturbations were situated directly above each other in the different PDMS layers, this resulted in the formation of one big diapir rather than several smaller ones, and the overburden layer was less deformed than with offset perturbations. Diapiric structures as those derived from the models without perturbation and where the perturbation are offset occur within Great Kavir Basin (Iran), where numerous salt diapirs grew from several salt horizons, which show a similar spatial distribution. The resulting structure observed in the model where the two perturbations situated directly above each other, is close to what is observed in composite batholiths such as the Flasergranitoid Zone within the Bergsträßer Odenwald Crystalline Complex (Germany). The second series of models were aimed to study crystal settling within a magma. For this purpose experiments with an artificial magma of 30 vol% olivine in 70 vol% basaltic melt were conducted to elucidate the formation mechanisms and time scales of gravitational cumulates. Through the experiments, two physical processes have been observed: (i) purely mechanical compaction, and (ii) chemical compaction induced by dissolution and re-precipitation of settled crystals. The results reveals that the mechanical settling of the dense olivine suspension occurs at about 1/6 the speed of simple Stokes settling, and a sedimentation exponent n of 4.1 is found. Evidences of chemical compaction induced by dissolution and re-precipitation of settled crystals have been highlighted by a detailed analysis of the fine structure of olivine grain boundaries. This last has revealed (1) the presence of Ca, which is characteristic only for MORB-melt, at the interface of two adjacent Ol-grains even when no melt is present; (2) a not fully crystallized boundary layer between two adjacent olivine grains. The crystal size distribution curves and the grain size growth exponent n ~3.6 indicate that diffusion controlled Ostwald ripening is the dominant crystal growth mechanism in concentrated magmatic suspensions. Finally, the formation times in natural olivine adcumulates have been calculated. The last series of centrifuge experiments deals with the crystal-melt settling-floating mechanism in a system composed of natural two pyroxene gabbro. The results have revealed a vertical evolution of the major and trace elements in the melt phase. Then, a numerical modelling of the sedimentation process of the crystals has been made in order to describe the compaction evolution with time. In comparing the numerical simulation with the centrifuge modelling, the stratification of the compacted layer in the runs is reproduced in numerical models. Moreover, on the base of the numerical and centrifuge modelling, a sedimentation exponent describing a deviation of settling in concentrated suspensions from Stokes sedimentation has been evaluated. Finally, the numerical simulation is applied to the Muskox intrusion to estimate the formation time and the melt fraction evolution in using the hindered sedimentation model calculations.
Transition metal nitrides, carbides and borides have a high potential for industrial applications as they not only have a high melting point but are generally harder and less compressible than the pure metals. Here we summarize recent advances in the synthesis of binary transition metal nitrides, carbides and borides focusing on the reaction of the elements at extreme conditions generated within the laser-heated diamond anvil cell. The current knowledge of their structures and high-pressure properties like high-(p; T) stability, compressibility and hardness is described as obtained from experiments.
A hygroscopicity tandem differential mobility analyzer (HTDMA) was used to measure the water uptake (hygroscopicity) of secondary organic aerosol (SOA) formed during the chemical and photochemical oxidation of several organic precursors in a smog chamber. Electron ionization mass spectra of the non-refractory submicron aerosol were simultaneously determined with an aerosol mass spectrometer (AMS), and correlations between the two different signals were investigated. SOA hygroscopicity was found to strongly correlate with the relative abundance of the ion signal m/z 44 expressed as a fraction of total organic signal (f44). m/z 44 is due mostly to the ion fragment CO2+ for all types of SOA systems studied, and has been previously shown to strongly correlate with organic O/C for ambient and chamber OA. The analysis was also performed on ambient OA from two field experiments at the remote site Jungfraujoch, and the megacity Mexico City, where similar results were found. A simple empirical linear relation between the hygroscopicity of OA at subsaturated RH, as given by the hygroscopic growth factor (GF) or "ϰorg" parameter, and f44 was determined and is given by ϰorg = 2.2 × f44 − 0.13. This approximation can be further verified and refined as the database for AMS and HTDMA measurements is constantly being expanded around the world. The use of this approximation could introduce an important simplification in the parameterization of hygroscopicity of OA in atmospheric models, since f44 is correlated with the photochemical age of an air mass.
Projections from coarse-grid global circulation models are not suitable for regional estimates of water balance or trends of extreme precipitation and temperature, especially not in complex terrain. Thus, downscaling of global to regionally resolved projections is necessary to provide input to integrated water resources management approaches for river basins like the Upper Danube River Basin (UDRB) and the Upper Brahmaputra River Basin (UBRB).
This paper discusses the application of the regional climate model COSMO-CLM as a dynamical downscaling tool. To provide accurate data the COSMO-CLM model output was post-processed by statistical means. This downscaling chain performs well in the baseline period 1971 to 2000. However, COSMO-CLM performs better in the UDRB than in the UBRB because of a longer application experience and a less complex climate in Europe.
Different climate change scenarios were downscaled for the time period 1960–2100. The projections show an increase of temperature in both basins and for all seasons. The values are generally higher in the UBRB with the highest values occurring in the region of the Tibetan Plateau. Annual precipitation shows no substantial change. However, seasonal amounts show clear trends, for instance an increasing amount of spring precipitation in the UDRB. Again, the largest trends for different precipitation statistics are projected in the region of the Tibetan Plateau. Here, the projections show up to 50% longer dry periods in the months June to September with a simultaneous increase of about 10% for the maximum amount of precipitation on five consecutive days. For the Assam region in India, the projections also show an increase of 25% in the number of consecutive dry days during the monsoon season leading to prolonged monsoon breaks.
This article presents a multiscale approach for detecting and monitoring soil erosion phenomena (i.e. gully erosion) in the agro-industrial area around the city of Taroudannt, Souss basin, Morocco. The study area is characterized as semi-arid with an annual average precipitation of 200 mm. Water scarcity, high population dynamics and changing land use towards huge areas of irrigation farming present numerous threats to sustainability. The agro-industry produces citrus fruits and vegetables in monocropping, mainly for the European market. Badland areas strongly affected by gully erosion border the agricultural areas as well as residential areas. To counteract the significant loss of land, land-leveling measures are attempted to create space for plantations and greenhouses. In order to develop sustainable approaches to limit gully growth the detection and monitoring of gully systems is fundamental. Specific gully sites are monitored with unmanned aerial vehicle (UAV) taking small-format aerial photographs (SFAP). This enables extremely high-resolution analysis (SFAP resolution: 2-10 cm) of the actual size of the gully channels as well as a detailed continued surveillance of their growth. Transferring the methodology on a larger scale using Quickbird satellite data (resolution: 60 cm) leads to the possibility of a large-scale analysis of the whole area around the city of Taroudannt (Area extent: ca. 350 km²). The results will then reveal possible relationships of gully growth and agro-industrial management and may even illustrate further interdependencies. The main objective is the identification of areas with high gully-erosion risk due to non-sustainable land use and the development of mitigation strategies for the study area.
Recently, new soil data maps were developed, which include vertical soil properties like soil type. Implementing those into a multilayer Soil-Vegetation-Atmosphere-Transfer (SVAT) scheme, discontinuities in the water content occur at the interface between dissimilar soils. Therefore, care must be taken in solving the Richards equation for calculating vertical soil water fluxes. We solve a modified form of the mixed (soil water and soil matric potential based) Richards equation by subtracting the equilibrium state of soil matrix potential ψE from the hydraulic potential ψh. The sensitivity of the modified equation is tested under idealized conditions. The paper will show that the modified equation can handle with discontinuities in soil water content at the interface of layered soils.
Towards the goal to understand the role of land-surface processes over the Indian sub-continent, a series of soil-moisture sensitivity simulations have been performed using a non-hydrostatic regional climate model COSMO-CLM. The experiments were driven by the lateral boundary conditions provided by the ERA-Interim (ECMWF) reanalysis. The simulation results show that the pre-monsoonal soil moisture has a significant influence on the monsoonal precipitation. Both, positive and negative soil-moisture precipitation (S-P) feedback processes are of importance. The negative S-P feedback process is especially influential in the western and the northern parts of India.
Droplets produced in a cloud condensation nuclei chamber (CCNC) as a function of supersaturation have been separated from unactivated aerosol particles using counterflow virtual impaction. Residual material after droplets were evaporated was chemically analyzed with an Aerodyne Aerosol Mass Spectrometer (AMS) and the Particle Analysis by Laser Mass Spectrometry (PALMS) instrument. Experiments were initially conducted to verify activation conditions for monodisperse ammonium sulfate particles and to determine the resulting droplet size distribution as a function of supersaturation. Based on the observed droplet size, the counterflow virtual impactor cut-size was set to differentiate droplets from unactivated interstitial particles. Validation experiments were then performed to verify that only droplets with sufficient size passed through the counterflow virtual impactor for subsequent analysis. A two-component external mixture of monodisperse particles was also exposed to a supersaturation which would activate one of the types (hygroscopic salts) but not the other (polystyrene latex spheres or adipic acid). The mass spectrum observed after separation indicated only the former, validating separation of droplets from unactivated particles. Results from ambient measurements using this technique and AMS analysis were inconclusive, showing little chemical differentiation between ambient aerosol and activated droplet residuals, largely due to low signal levels. When employing as single particle mass spectrometer for compositional analysis, however, we observed enhancement of sulfate in droplet residuals.
Biogenic NO emissions from soils (SNOx) play important direct and indirect roles in tropospheric chemistry. The most widely applied algorithm to calculate SNOx in global models was published 15 years ago by Yienger and Levy (1995), and was based on very few measurements. Since then, numerous new measurements have been published, which we used to build up a compilation of world wide field measurements covering the period from 1978 to 2010. Recently, several satellite-based top-down approaches, which recalculated the different sources of NOx (fossil fuel, biomass burning, soil and lightning), have shown an underestimation of SNOx by the algorithm of Yienger and Levy (1995). Nevertheless, to our knowledge no general improvements of this algorithm, besides suggested scalings of the total source magnitude, have yet been published. Here we present major improvements to the algorithm, which should help to optimize the representation of SNOx in atmospheric-chemistry global climate models, without modifying the underlying principals or mathematical equations. The changes include: (1) using a new landcover map, with twice the number of landcover classes, and using annually varying fertilizer application rates; (2) adopting a fraction of 1.0 % for the applied fertilizer lost as NO, based on our compilation of measurements; (3) using the volumetric soil moisture to distinguish between the wet and dry states; and (4) adjusting the emission factors to reproduce the measured emissions in our compilation (based on either their geometric or arithmetic mean values). These steps lead to increased global annual SNOx, and our total above canopy SNOx source of 8.6 Tg yr−1 (using the geometric mean) ends up being close to one of the satellite-based top-down approaches (8.9 Tg yr−1). The above canopy SNOx source using the arithmetic mean is 27.6 Tg yr−1, which is higher than all previous estimates, but compares better with a regional top-down study in eastern China. This suggests that both top-down and bottom-up approaches will be needed in future attempts to provide a better calculation of SNOx.
The Late Miocene (11.6–5.3 Ma) is a crucial period in the history of the Asian monsoon. Significant changes in the Asian climate regime have been documented for this period, which saw the formation of the modern Asian monsoon system. However, the spatiotemporal structure of these changes is still ambiguous, and the associated mechanisms are debated. Here, we present a simulation of the average state of the Asian monsoon climate for the Tortonian (11–7 Ma) using the regional climate model CCLM3.2. We employ relatively high spatial resolution (1° × 1°) and adapt the physical boundary conditions such as topography, land-sea distribution and vegetation in the regional model to represent the Late Miocene. As climatological forcing, the output of a Tortonian run with a fully-coupled atmosphere-ocean general circulation model is used. Our regional Tortonian run shows a stronger-than-present East Asian winter monsoon wind as a result of the enhanced mid-latitude westerly wind of our global forcing and the lowered present-day northern Tibetan Plateau in the regional model. The summer monsoon circulation is generally weakened in our regional Tortonian run compared to today. However, the changes of summer monsoon precipitation exhibit major regional differences. Precipitation decreases in northern China and northern India, but increases in southern China, the western coast and the southern tip of India. This can be attributed to the changes in both the regional topography (e.g. the lower northern Tibetan Plateau) and the global climate conditions (e.g. the higher sea surface temperature). The spread of dry summer conditions over northern China and northern Pakistan in our Tortonian run further implies that the monsoonal climate may not have been fully established in these regions in the Tortonian. Compared with the global model, the high resolution regional model highlights the spatial differences of the Asian monsoon climate in the Tortonian, and better characterizes the convective activity and its response to regional topographical changes. It therefore provides a useful and compared to global models, a complementary tool to improve our understanding of the Asian monsoon evolution in the Late Miocene.
Droplets produced in a cloud condensation nucleus chamber as a function of supersaturation have been separated from unactivated aerosol particles using counterflow virtual impaction. Residual material after droplets were evaporated was chemically analyzed with an Aerodyne Aerosol Mass Spectrometer and the Particle Analysis by Laser Mass Spectrometry instrument. Experiments were initially conducted to verify activation conditions for monodisperse ammonium sulfate particles and to determine the resulting droplet size distribution as a function of supersaturation. Based on the observed droplet size, the counterflow virtual impactor cut-size was set to differentiate droplets from unactivated interstitial particles. Validation experiments were then performed to verify that only droplets with sufficient size passed through the counterflow virtual impactor for subsequent analysis. A two-component external mixture of monodisperse particles was also exposed to a supersaturation which would activate one of the types (ammonium sulfate) but not the other (polystyrene latex spheres). The mass spectrum observed after separation indicated only the former, validating separation of droplets from unactivated particles. Results from atmospheric measurements using this technique indicate that aerosol particles often activate predominantly as a function of particle size. Chemical composition is not irrelevant, however, and we observed enhancement of sulfate in droplet residuals using single particle analysis.
Numerical simulation of flow, H2SO4 cycle and new particle formation in the CERN CLOUD chamber
(2011)
To study the effect of galactic cosmic rays on aerosols and clouds, the Cosmic Leaving OUtdoor Droplets (CLOUD) project was established. Experiments are carried out at a 26 m3 tank at CERN (Switzerland). In the experiments, the effect of ionising particle radiation on H2SO4 particle formation and growth is investigated. To evaluate the experimental configuration, the experiment was simulated using a coupled multidimensional CFD – particle model (CLOUD-FPM). In the model the coupled fields of gas/vapour species, temperature, flow velocity and particle properties were computed to investigate the tank's mixing state and mixing times. Simulation results show that the mixing state of the tank's contents largely depends on the characteristics of the mixing fans and a 1-fan configuration, as used in first experiments, may not be sufficient to ensure a homogeneously mixed chamber. To mix the tank properly, 2 fans are necessary. The 1/e response times for instantaneous changes of wall temperature and saturation ratio inside the chamber were found to be in the order of few minutes. Particle nucleation and growth was also simulated and particle number size distribution properties of the freshly nucleated particles (particle number, mean size, standard deviation of the assumed log-normal distribution) were found to be mixed over the tank's volume similar to the gas species.
The aim of this study is a better understanding of radiation processes in regional climate models (RCMs) in order to quantify their impact and to reduce possible errors. A first important task in finding an answer to this question was to examine the accuracy of the components of the radiation budget in regional climate simulations. To this end, the simulated radiation budgets of two regional climate simulations for Europe were compared with a satellite-based reference. In the simulations with the RCM COSMO-CLM there were some serious under- and overestimations of short- and long-wave net radiation in Europe. However, taking into account the differences in the reference datasets, the results of the COSMO-CLM were quite satisfactory.
Using statistical methods, the influence of potential sources of uncertainties was estimated. Uncertainties in the cloud cover and surface albedo had a significant impact on uncertainties in short-wave net radiation, the explained variance of uncertainties in cloud cover was two to three times higher than that of uncertainties in surface albedo. Uncertainties in the cloud cover resulted in significant errors in the net long-wave radiation. However, the influence of uncertainties in soil temperature on errors in the long-wave radiation budget was low or even negligible. These results were confirmed in a comparison with simulations of the REMO and ALADIN regional climate models. It is reasonable to expect that a better parameterization of relatively simple parameters such as cloud cover and surface albedo is a means of significantly improving the simulation of radiation budget components in the COSMO-CLM.
An important question for the application of RCMs is to examine whether the results of radiation uncertainties and their impact factors are comparable if the model is applied in a region that is not the one for which it was originally created. Comparisons of the simulated radiation budgets of different RCMs for West Africa showed that problems in the simulation of short- and long-wave radiation fluxes were a widespread problem. Most of the tested models showed some considerable under- or overestimation of the short- and long-wave radiation fluxes.
Similar to Europe uncertainties in cloud cover were also in the simulations for Africa a significant factor affecting uncertainties in the simulated radiation fluxes. However, for the African simulations uncertainties in the parameterization of surface albedo were much more important than in Europe. On average, overland uncertainties in the cloud cover and surface albedo were of similar importance. Uncertainties in soil temperature simulations were of higher importance in Africa, and reached overland similar values of the mean explained variance (R2 ≈ 0.2) such as uncertainties in the cloud cover. This indicates a geographical dependence of the model error. This study confirmed the assumption that an improved parameterization of relatively simple parameters such as the surface albedo in RCMs leads to a significant improvement in the modeled radiation budget, particularly in Africa.
The influence of errors in the simulated radiation budget components on the simulation of climate processes, such as the West-African monsoon (WAM), was investigated in a next step. The evaluation of ERA-Interim and ECHAM5 driven COSMO-CLM simulations for Africa showed that the main features of the WAM were well reproduced by the model, but there were only slight improvements compared to the driving data. The index of convective activity in the model simulations was much too high and precipitation was underestimated in large parts of tropical Africa. The partly considerable differences between the ERA-Interim and ECHAM5 driven simulations demonstrated the sensitivity of the RCM to the boundary conditions and in particular to the sea surface temperature. An excessive northwards shift of the monsoon in the model was influenced by the land-sea temperature gradient and the strength of the Saharan heat low. Consequently, a part of the error was due to the driving data and the model itself produced another part.
By modifying the parameterization of the bare soil albedo the errors in the radiation budget and 2 m temperature in the Sahara region were significantly reduced. Similarly, the overesti-mation of precipitation and convection has been reduced in the Sahel. The effect of this modifi-cation on the examined WAM area was low. This confirmed that especially in desert regions, errors in the surface albedo were a driving factor for errors in the radiation budget. However, there are other important factors not yet sufficiently understood that have a strong influence on the quality of the simulation of the WAM.
The analysis of the actual state, the quantification of error sources and the highlighting of connections made it possible to find means to reduce uncertainties in the simulated radiation in RCMs and to have a better understanding of radiation processes. However, the magnitude of the errors found, the number of possible influencing factors, and the complexity of interactions, indicate that there is still a need for further research in this area.
In situ measurements of ice crystal size distributions in tropical upper troposphere/lower stratosphere (UT/LS) clouds were performed during the SCOUT-AMMA campaign over West Africa in August 2006. The cloud properties were measured with a Forward Scattering Spectrometer Probe (FSSP-100) and a Cloud Imaging Probe (CIP) operated aboard the Russian high altitude research aircraft M-55 Geophysica with the mission base in Ouagadougou, Burkina Faso. A total of 117 ice particle size distributions were obtained from the measurements in the vicinity of Mesoscale Convective Systems (MCS). Two to four modal lognormal size distributions were fitted to the average size distributions for different potential temperature bins. The measurements showed proportionately more large ice particles compared to former measurements above maritime regions. With the help of trace gas measurements of NO, NOy, CO2, CO, and O3 and satellite images, clouds in young and aged MCS outflow were identified. These events were observed at altitudes of 11.0 km to 14.2 km corresponding to potential temperature levels of 346 K to 356 K. In a young outflow from a developing MCS ice crystal number concentrations of up to (8.3 ± 1.6) cm−3 and rimed ice particles with maximum dimensions exceeding 1.5 mm were found. A maximum ice water content of 0.05 g m−3 was observed and an effective radius of about 90 μm. In contrast the aged outflow events were more diluted and showed a maximum number concentration of 0.03 cm−3, an ice water content of 2.3 × 10−4 g m−3, an effective radius of about 18 μm, while the largest particles had a maximum dimension of 61 μm.
Close to the tropopause subvisual cirrus were encountered four times at altitudes of 15 km to 16.4 km. The mean ice particle number concentration of these encounters was 0.01 cm−3 with maximum particle sizes of 130 μm, and the mean ice water content was about 1.4 × 10−4 g m−3. All known in situ measurements of subvisual tropopause cirrus are compared and an exponential fit on the size distributions is established for modelling purposes.
A comparison of aerosol to ice crystal number concentrations, in order to obtain an estimate on how many ice particles may result from activation of the present aerosol, yielded low ratios for the subvisual cirrus cases of roughly one cloud particle per 30 000 aerosol particles, while for the MCS outflow cases this resulted in a high ratio of one cloud particle per 300 aerosol particles.
In-situ measurements of ice crystal size distributions in tropical upper troposphere/lower stratosphere (UT/LS) clouds were performed during the SCOUT-AMMA campaign over West Africa in August 2006. The cloud properties were measured with a Forward Scattering Spectrometer Probe (FSSP-100) and a Cloud Imaging Probe (CIP) operated aboard the Russian high altitude research aircraft M-55 ''Geophysica'' with the mission base in Ouagadougou, Burkina Faso. A total of 117 ice particle size distributions were obtained from the measurements in the vicinity of Mesoscale Convective Systems (MCS). Two or three modal lognormal size distributions were fitted to the average size distributions for different potential temperature bins. The measurements showed proportionate more large ice particles compared to former measurements above maritime regions. With the help of trace gas measurements of NO, NOy, CO2, CO, and O3, and satellite images clouds in young and aged MCS outflow were identified. These events were observed at altitudes of 11.0 km to 14.2 km corresponding to potential temperature levels of 346 K to 356 K. In a young outflow (developing MCS) ice crystal number concentrations of up to 8.3 cm−3 and rimed ice particles with maximum dimensions exceeding 1.5 mm were found. A maximum ice water content of 0.05 g m−3 was observed and an effective radius of about 90 μm. In contrast the aged outflow events were more diluted and showed a maximum number concentration of 0.03 cm−3, an ice water content of 2.3 × 10−4 g m−3, an effective radius of about 18 μm, while the largest particles had a maximum dimension of 61 μm.
Close to the tropopause subvisual cirrus were encountered four times at altitudes of 15 km to 16.4 km. The mean ice particle number concentration of these encounters was 0.01 cm−3 with maximum particle sizes of 130 μm, and the mean ice water content was about 1.4 × 10−4 g m−3. All known in-situ measurements of subvisual tropopause cirrus are compared and an exponential fit on the size distributions is established in order to give a parameterisation for modelling.
A comparison of aerosol to ice crystal number concentrations, in order to obtain an estimate on how many ice particles result from activation of the present aerosol, yielded low activation ratios for the subvisual cirrus cases of roughly one cloud particle per 30 000 aerosol particles, while for the MCS outflow cases this resulted in a high ratio of one cloud particle per 300 aerosol particles.
We present the analysis of the impact of convection on the composition of the tropical tropopause layer region (TTL) in West-Africa during the AMMA-SCOUT campaign. Geophysica M55 aircraft observations of water vapor, ozone, aerosol and CO2 during August 2006 show perturbed values at altitudes ranging from 14 km to 17 km (above the main convective outflow) and satellite data indicates that air detrainment is likely to have originated from convective cloud east of the flights. Simulations of the BOLAM mesoscale model, nudged with infrared radiance temperatures, are used to estimate the convective impact in the upper troposphere and to assess the fraction of air processed by convection. The analysis shows that BOLAM correctly reproduces the location and the vertical structure of convective outflow. Model-aided analysis indicates that convection can influence the composition of the upper troposphere above the level of main outflow for an event of deep convection close to the observation site. Model analysis also shows that deep convection occurring in the entire Sahelian transect (up to 2000 km E of the measurement area) has a non negligible role in determining TTL composition.