Institutes
Refine
Document Type
- Article (16) (remove)
Has Fulltext
- yes (16)
Is part of the Bibliography
- no (16)
Keywords
- bibliometrics (2)
- Aedes aegypti (1)
- Aedes albopictus (1)
- Airport-related emissions (1)
- Ambient air (1)
- Anderson–Fabry (1)
- Bevölkerungsschutz (1)
- Bibliometrics (1)
- COVID-19 (1)
- Cerebrospinal fluid diagnostics (1)
Institute
- Medizin (16)
- Geowissenschaften / Geographie (1)
Background: Particulate matter (PM) emission caused by tobacco combustion leads to severe health burdens worldwide. Second-hand smoke exposure is extraordinarily high in enclosed spaces (e.g., indoor rooms, car cabins) and poses a particular threat to the health of vulnerable individuals (e.g., children, elderly, etc.). This study aimed to establish a new measuring platform and investigate PM emissions under four different ventilation conditions inside a car cabin without exposing any person to harmful tobacco smoke.
Methods: PM concentrations were measured during the smoking of 3R4F reference cigarettes in a Mitsubishi Space Runner (interior volume 3.709 m3). The cigarettes were smoked with a machine, eliminating exposure of the researchers. Cigarettes were extinguished 4.5 min after ignition, and PM measurements continued until 10 min after ignition.
Results: High mean PM concentrations were measured for cigarettes without ventilation after 4.5 min (PM10: 1150 µg/m3, PM2.5: 1132 µg/m3, PM1: 861.6 µg/m3) and after 10 min (PM10: 1608 µg/m3, PM2.5: 1583 µg/m3, PM1: 1133 µg/m3). 3R4F smoked under conditions with turned on ventilation resulted in reduction of PM compared to those smoked without ventilation after 4.5 min (PM10:-47.5 to -58.4%, PM2.5:-47.2 to -58%, PM1:-39.6 to -50.2%) and after 10 min (PM10:-70.8 to -74.4%, PM2.5:-70.6 to -74.3%, PM1:-64.0 to -68.0%). Cigarettes smoked without ventilation generated high PM peaks at 4.5 min (PM10: 2207 µg/m3, PM2.5: 2166 µg/m3, PM1: 1421 µg/m3) and at 10 min (PM10: 1989 µg/m3, PM2.5: 1959 µg/m3, PM1: 1375 µg/m3). PM peaks of cigarettes smoked under different ventilation modes varied at 4.5 min (PM10: 630-845 µg/m3, PM2.5: 625-836 µg/m3, PM1: 543 - 693 µg/m3) and 10 min (PM10: 124 - 130 µg/m3, PM2.5: 124 - 129 µg/m3, PM1: 118 - 124 µg/m3).
Conclusion: The new measuring platform provides a safer way for researchers to investigate PM emissions of cigarettes. These data are comparable to published research and show that smoking in a parked vehicle with the windows closed generates harmful PM emissions even when the vehicle ventilation is in operation. Future studies should be carried out using the new measuring platform investigating PM exposure and PM distribution of in-vehicle smoking under a wide range of conditions.
Despite antagonizing attempts from the tobacco industry, passive inhalation of tobacco smoke is known to be cancerogenic and toxic to human health for decades. Nonetheless, millions of non-smoking adults and children are still victims of second-hand smoke. Accumulation of particulate matter (PM) in confined spaces such as the car are particularly harmful due to high concentrations. We here aimed to analyze the specific effects of ventilation conditions in the setting of a car. By the use of the measuring platform TAPaC (tobacco-associated particulate matter emissions inside a car cabin), 3R4F reference cigarettes, Marlboro red, and Marlboro gold were smoked in a car interior with a volume of 3.709 m3. Seven different ventilation conditions (C1–C7) were analyzed. Under C1, all windows were closed. Under C2–C7, the car ventilation was turned on power level 2/4 with the air directed towards the windshield. Only the passenger side window was opened, where an outer placed fan could create an airstream speed of 15.9–17.4 km/h at one meter distance to simulate a driving car. C2: Window 10 cm opened. C3: Window 10 cm opened with the fan turned on. C4: Window half-opened. C5: Window half-opened with the fan turned on. C6: Window fully opened. C7: Window fully opened with the fan turned on. Cigarettes were remotely smoked by an automatic environmental tobacco smoke emitter and a cigarette smoking device. Depending on the ventilation condition the cigarettes emitted different mean PM concentrations after 10 min under condition C1 (PM10: 1272–1697 µg/m3, PM2.5: 1253–1659 µg/m3, PM1: 964–1263 µg/m3) under C2, C4, and C6 (PM10: 68.7–196.2 µg/m3, PM2.5: 68.2–194.7 µg/m3, PM1: 66.1–183.8 µg/m3) C3, C5, and C7 (PM10: 73.7–139 µg/m3, PM2.5: 72–137.9 µg/m3, PM1:68.9–131.9 µg/m3). Vehicle ventilation is insufficient to protect passengers from toxic second-hand smoke completely. Brand-specific variations of tobacco ingredients and mixtures markedly influence PM emissions under ventilation conditions. The most efficient ventilation mode to reduce PM exposure was achieved by opening the passenger´s window 10 cm and turning the onboard ventilation on power level 2/4. In-vehicle smoking should be banned to preserve innocent risk groups (e.g., children) from harm.
Highlights
• Currently, China has the most publications, ahead of the USA and European countries.
• Research focuses are strictly separated into ecological and material science topics.
• Russia and Ukraine are among the frontrunners with a clear focus on materials science.
• The focus in PFAS research is shifting toward ecological issues.
• A national imbalance can be observed that leaves the low economies behind.
Abstract
The European Commission's current efforts to launch the largest proposal to restrict per- and polyfluoroalkyl substances (PFAS) in history reflect the dire global plight of PFAS accumulation in the environment and their health impacts. While there are existing studies on PFAS research, there is a lack of comprehensive analysis that both covers the entire research period and provides deep insights into global research patterns, incentives, and barriers based on various parameters. We have been able to demonstrate the increasing interest in PFAS research, although citation numbers are declining prematurely. Policy regulations based on proving and establishing the toxicity of PFASs have stimulated research in developed countries and vice versa, with increasing emphasis on ecological aspects. China, in particular, is investing increasingly in PFAS research, but without defining or implementing regulations - with devastating effects. The separation of industrial and environmental research interests is clear, with little involvement of developing countries, even though their exposure to PFAS is devastating. It, therefore, requires increased globally networked and multidisciplinary approaches to address PFAS contamination challenges.
The question of whether nuclear energy—as a source with relatively low carbon dioxide emissions—can be classified as a sustainable energy source has come into focus in connection with climate change. There is a controversy over securing independence from fossil fuels and gas supplies from other countries through a revival of nuclear energy. On the other hand, some viewpoints are critical: the handling of nuclear waste and the still unclear risks to human health and the environment, especially in light of recent perils from Russian military attacks on Ukrainian nuclear plants. To evaluate the worldwide publications on nuclear energy under health and environmental aspects, socio-economic parameters were included to provide an informed background for all stakeholders, from scientists to decision-makers. The correlation between the number of nuclear power plants and the publication output of the countries is proven to be highly significant. Thus, the operating countries publish the most. It has been shown that the development and economic use of nuclear energy are major stimuli for scientific endeavors. Reactor accidents have also spurred research. Mathematical risk modeling has been the area with the highest citation rate to date, but environmental and health aspects have become more important, especially after major accidents. The results show the importance of economic interests in research on nuclear energy from health and environmental aspects. Against the background of transnational hazards, global research participation should be encouraged. Moreover, the international debate should not ignore the reality of threats and their possible impacts.
Highlights
• An airport can result in high particle concentrations in a distant residential area.
• The particle size distribution indicated the airport as the main source of particles.
• Lower air traffic during the COVID-19 pandemic lead to lower particle concentrations.
• The particle concentration showed high temporal variations.
Abstract
Exposure to ultrafine particles has a significant influence on human health. In regions with large commercial airports, air traffic and ground operations can represent a potential particle source. The particle number concentration was measured in a low-traffic residential area about 7 km from Frankfurt Airport with a Condensation Particle Counter in a long-term study. In addition, the particle number size distribution was determined using a Fast Mobility Particle Sizer.
The particle number concentrations showed high variations over the entire measuring period and even within a single day. A maximum 24 h-mean of 24,120 cm−3 was detected. Very high particle number concentrations were in particular measured when the wind came from the direction of the airport. In this case, the particle number size distribution showed a maximum in the particle size range between 5 and 15 nm. Particles produced by combustion in jet engines typically have this size range and a high potential to be deposited in the alveoli. During a period with high air traffic volume, significantly higher particle number concentrations could be measured than during a period with low air traffic volume, as in the COVID-19 pandemic.
A large commercial airport thus has the potential to lead to a high particle number concentration even in a distant residential area. Due to the high particle number concentrations, the critical particle size, and strong concentration fluctuations, long-term measurements are essential for a realistic exposure analysis.
Private-label cigarettes are cigarettes that belong to the retailer itself. Private-label cigarettes from discounters or supermarkets are cheaper than brand-name cigarettes, and their lower price has allowed them to garner an ever-increasing share of the tobacco product market, especially among lower socioeconomic groups. Particulate matter (PM), a considerable component of air pollution, is a substantial health-damaging factor. Smoking is the primary source of PM in smokers’ homes. In a 2.88 m3 measuring chamber, the PM emission fractions PM10, PM2.5, and PM1 from three private-label cigarette brands and three brand-name cigarette brands with identical nicotine, tar, and carbon monoxide content were measured and compared to those of a reference cigarette by laser aerosol spectroscopy. All cigarette brands emitted PM in health-threatening quantities. The measurement results ranged from 1394 µg/m3 to 1686 µg/m3 PM10, 1392 µg/m3 to 1682 µg/m3 PM2.5, and 1355 µg/m3 to 1634 µg/m3 PM1, respectively. Only one private-label brand differed significantly (p < 0.001) from the other cigarette brands, which were tested with slightly lower PM levels. All other brands differed only marginally (not significant, p > 0.05) from one another. Significant (p < 0.05) negative correlations between private-label and brand-name cigarettes were found for PM10, PM2.5, and PM1 when accounting for tobacco filling densities, and for PM1 when accounting for filter lengths. The especially health-hazardous fraction PM1 accounted for the largest proportion of PM emissions from the cigarettes tested. The results of this study suggest that- cheaper tobacco products are as harmful as more expensive ones, at least regarding PM emissions. This highlights the importance of anti-smoking campaigns, especially for lower socioeconomic groups, where smoking is more widespread. Governments should reduce the price gap between cheap and more expensive tobacco products by implementing specific tobacco taxes. In such a case, at increasing prices of tobacco products, a downward shift to private-label cigarettes would probably decrease.
Radon ist ein ubiquitär im Erdmantel sowie in der Luft und im Wasser vorkommendes radioaktives Edelgas. Obwohl die mit der Exposition assoziierten Erkrankungen seit dem Mittelalter bekannt waren, ist eine kausale Zuordnung von Agens und Krankheit erst in der Mitte des letzten Jahrhunderts gelungen. Durch die physikalischen Eigenschaften des Gases ist die Prävention darauf ausgerichtet, die Exposition zu minimieren. Eine koordinierte Bemühung der EU, durch einheitliche Regeln die Bevölkerung zu schützen, stellt die Richtlinie 2013/59/EURATOM vom 5. Dezember 2013 dar. Umgesetzt in nationales Recht, sah die deutsche Strahlenschutzgesetzgebung vor, dass am 01.01.2021 die verantwortlichen Bundesländer basierend auf einer Expositionskarte die Gebiete festlegen, in denen der Grenzwert der Aktivitätskonzentration von Radon in der Luft im Jahresmittel 300 Bq/m3 überschreitet. In dieser Arbeit sollen die Fortschritte auf dem Weg zu einem umfassenderen Schutz vor den Gefahren durch Radon für die Bevölkerung in Deutschland dargestellt werden.
Background: Climate change is safe to be one of the biggest challenges of mankind. Human activities, especially the combustion of fossil fuels, contribute to the increase of greenhouse gases in the atmosphere and thus to the pace of climate change. The effects of climate change are already being felt, and the resulting damage will most likely be enormous worldwide. Because global impacts vary widely and will lead to very different national vulnerability to climate impacts, each country, depending on its economic background, has different options to ward off negative impacts. Decisions have to be made to mitigate climate consequences according to the preparedness and the vulnerability of countries against the presumed impacts. This requires a profound scientific basis. To provide sound background information, a bibliometric study was conducted to present global research on climate change using established and specific parameters. Bibliometric standard parameters, established socioeconomic values, and climate change specific indices were used for the analyses. This allowed us to provide an overall picture of the global research pattern not only in terms of general aspects, but also in terms of climate change impacts, its effects and regional differences. For this purpose, we choose representative indices, such as the CO2 emissions for the responsibility of countries, the global climate risk index as a combination value for the different types of damage that countries can expect, the increase in sea level as a specific parameter as a measure of the huge global environmental impacts, and the readiness and vulnerability index for the different circumstances of individual countries under which climate change will take place. We hope to have thus made a comprehensive and representative selection of specific parameters that is sufficient to map the global research landscape. We have supplemented the methodology accordingly.
Results: In terms of absolute publication numbers, the USA was the leading country, followed by the UK, and China in 3rd place. The steep rise in Chinese publication numbers over time came into view, while their citation numbers are relatively low. Scandinavian countries were leading regarding their publication numbers related to CO2 emission and socioeconomic indices. Only three developing countries stand out in all analyses: Costa Rica, the Fiji Atoll, and Zimbabwe, although it is here that the climate impact will be greatest. A positive correlation between countries’ preparedness for the impacts of climate change and their publication numbers could be shown, while the correlation between countries’ vulnerability and their publication numbers was negative.
Conclusions: We could show that there exists an inequity between national research efforts according to the publication output and the demands and necessities of countries related to their socioeconomic status. This inequity calls for a rethink, a different approach, and a different policy to improve countries' preparedness and mitigation capacity, which requires the inclusion of the most affected regions of the world in a strengthened international cooperation network.
Die vorliegende Übersicht zum Biomarker Neurofilament-Leichtketten (NFL) wird im Rahmen der Serie „Biomarker“ des Zentralblatts für Arbeitsmedizin, Arbeitsschutz und Ergonomie publiziert. Das NFL ist ein Serummarker in der Diagnostik der multiplen Sklerose. NFL eignet sich als Marker zur Therapie‑, Verlaufs- und Rezidivkontrolle von multipler Sklerose. Hier zeigt dieser eine hohe Sensitivität und Spezifität.
Background: After nearly a quarter-century of declining poverty, the numbers are rising again significantly. This is due not only to effects of climate change but also to the COVID-19 pandemics and armed conflict. Combined with the enormous health impacts, that will cause misery and health care costs worldwide. Therefore, this study provides background information on the global research landscape on poverty and health to help researchers, stakeholders, and policymakers determine the best way to address this threat.
Results: The USA is the key player, dealing mainly with domestic issues. European countries are also involved but tend to be more internationally oriented. Developing countries are underrepresented, with Nigeria standing out. A positive correlation was found between publication numbers and economic strength, while the relationship between article numbers and multidimensional poverty was negatively correlated.
Conclusions: These findings highlight the need for advanced networking and the benefits of cross-disciplinary research to mitigate the coming impacts.