Doctoral Thesis
Refine
Year of publication
- 2004 (15) (remove)
Document Type
- Doctoral Thesis (15) (remove)
Language
- English (15) (remove)
Has Fulltext
- yes (15)
Is part of the Bibliography
- no (15)
Keywords
- Atemwege (1)
- Butylmethylether <tertiär-> (1)
- Calcium activated potassium channels (1)
- Calcium-aktivierte (1)
- Cardiolipin (1)
- Cytochrom c (1)
- Cytochrom-bc1-Komplex (1)
- Einzelmolekülanalyse (1)
- FT-IR-Spektroskopie (1)
- Festphasenmikroextraktion (1)
Institute
- Biochemie und Chemie (15) (remove)
The cytochrome bc1 complex or ubiquinol:cytochrome c oxidoreductase (QCR) catalyses electron transfer from ubiquinol to cytochrome c in respiration and photosynthesis coupled to a vectorial proton transport across the membrane, in which the enzyme resides. In both bacteria and eukaryotic organisms, QCR participates in supramolecular assembly of membrane proteins that comprise the respiratory or photosynthetic chain. In the present work, proton transfer pathways, substrate binding and the supramolecular assembly of the respiratory chain in yeast were probed by structure-based site-directed mutagenesis and characterization of the variants. Both active sites centre P, the place of quinol oxidation, and centre N, where quinone reduction takes place, lack direct access to the bulk solvent necessary for proton release and uptake. Based on the X-ray structure, proton transfer pathways were postulated. Analysis at centre P showed, that E272 and Y132 of cytochrome b are important for QCR catalysis as indicated by increased superoxide production and lowered Cyc1p reductase activity in these variants. Pre-steady state heme reduction kinetics in combination with stigmatellin resistance indicated that charge and length of the side chain at position 272 are crucial for efficient docking of the ISP to form the enzyme substrate complex and for electron bifurcation at centre P. Variants of Y312 and F129, both residues of cytochrome b, showed an increased Km indicating participation of these residues in coordination of ubiquinol or the possible intermediate semiquinone anion radical. F129 proved to be crucial for a functional Q-cycle as indicated by respiratory negative growth phenotype and a lowered H+/e- stoichiometry of F129 variants. At centre N, the postulated CL/K and E/R proton transfer pathways are located at opposite sites of the bound ubiquinone. Variants in the surface residues R218 (cytochrome b) and E52 (Qcr7) of the E/R pathway and E82 (Qcr7) of the CL/K pathway showed instability upon purification indicating an important role of these residues for QCR integrity. The slowed down centre N reduction kinetics in H85 (CL/K), R218 and N208 (both E/R) variant was attributed to a destabilised semiquinone anion consistent with the observed decreased sensitivity towards the site-specific inhibitor antimycin and an increased Km. Variants of residues of both pathway, E82Q and R218M, exhibited a decreased H+/e- stoichiometry indicating a crucial role of both residue for maintaining a working Q-cycle and supporting the proposed protonation of the substrate via the Cl/K and the E/R pathway. Long-range interaction between centre N and centre P were observed by altered reduction kinetics of the high potential chain and increased superoxide production in the centre N variants. The role of the cation-pi-interaction between F230 of Cyt1p and R19 of cytochrome c in binding of the redox carrier to QCR was analysed. In F230L hydrophobic interaction were partially lost as was deduced from the ionic strength dependence of Cyc1p reductase activity and Cycp1 binding, as detected by ionic strength sensitive Kd and Km for Cyc1p. The decreased enzymatic rate of F230W could be explained by a disturbed binding of Cyc1p to the variant enzyme. F230 may influence the heme mid point potential and thereby the electron transfer rate to Cyc1p. Reduction of Cobp via both centre P and centre N was disturbed suggesting an interaction between high and low potential chain. Supramolecular association between QCR and cytochrome c oxidase (COX) in yeast mitochondria was probed by affinity chromatography of a his-tagged QCR in the presence of the mild detergent digitonin. In comparison to purification with laurylmaltoside, the presence of both QCR and COX subunits was detected in the elution fractions by SDS-PAGE, Cyc1p reductase and TMPD oxidase activity assays and immunoblot analysis. The CL-dependent formation of the supercomplex between QCR and COX was analysed by replacement variants in the CL-binding site of QCR in CL containing and CL free environment. With an increasing number of replacements of the three lysines the CL-binding pocket supercomplex formation was not abolished, when CL is present as shown by BN-PAGE analysis. This was supported by the synergetic decrease in enzyme activity for both enzymes upon increased number of replacements. In the CL-free environment, no supracomplex formation was observed for a wildtype CL binding site. By replacements of two lysines in the CL-binding pocket, supercomplex formation could be recovered as revealed by BN-PAGE. This indicates, that CL may serve as a charge neutralizer for the lysines near the presumed interaction domain between complex III and complex IV. The obtained results for centre P provide new information of residues critical for stabilisation of ubiquinol and controlling electron short circuit reactions. The observations for centre N variants clearly support the proposed two proton transfer pathways and the role of the bound phospholipids in centre N kinetics. Variants in the Cyc1p binding site suggest a role for F230 both in Cyc1p binding and electron transfer. Clear interaction between the high and low potential chain in both Cyt1p and centre N variants strongly support long-range interactions in the complex. Studies on the supramolecular association of complex III and complex IV indicate a new role of Cl in stabilising a supracomplex.
Safety concerns associated with the use of viral vectors in gene therapy applications have attracted considerable attention towards the development of nonviral vectors as alternatives for DNA delivery. While nonviral vectors are commonly not associated with safety problems, they are still very inefficient compared to viral vectors, and require significant improvements to approach the efficiency of their viral counterparts. Meanwhile ligands or single-chain antibody fragments that bind to cell surface receptors for increased and/or specific cellular uptake, endosome escape activities, and nuclear localization sequences (NLSs) to enhance transport of plasmid DNA into the nucleus, have become available that can be incorporated into nonviral vectors to improve their efficacy. However, as gene delivery is a multistep process, the challenge is to incorporate multiple of these functional elements into a single nonviral vector system, while retaining their specific activities. A promising method to attach such entities to plasmid DNA is the use of multifunctional fusion proteins that bind to DNA through a DNA-binding domain. In principle, two types of DNA-binding domains/proteins can be used to anchor additional functional domains or peptides to a plasmid, namely sequence-specific DNA-binding domains, described in the first part of this thesis, or those that bind DNA independent of its sequence, exemplified in the second part of this work by a derivative of the human HMGB2 protein. The first fusion protein constructed and analyzed contained the E. coli LexA repressor as a sequence-specific DNA-binding domain. In addition, this DNA-carrier protein, termed TEL, included a bacterial translocation domain as an integrated endosome escape activity, and human TGF-a for specific targeting to the EGF-receptor (EGFR). TEL was expressed in E. coli and purified under both native and denaturing conditions. Purified, denatured TEL was refolded and subsequently shown to bind specifically to EGFR-expressing cells. However, inclusion of TEL in complexes of plasmid DNA and poly-L-lysine (pL) did not lead to increased gene delivery into EGFR-expressing COS-1 cells. Most likely this was due to the absence of DNA-binding activity of the LexA moiety in TEL. In contrast, native TEL was able to interact specifically with DNA. Nevertheless, since this interaction was rather weak, and refolding of denatured TEL had not resulted in functional activity of all of its protein domains, it seemed unlikely that fusion proteins containing LexA would exhibit gene transfer capabilities superior to those of similar DNA-carrier proteins previously constructed in our group. Further work therefore focused on the use of the E2C-Sp1C protein as an alternative sequencespecific DNA-binding domain. This artificial zinc-finger protein was fused to the single-chain antibody fragment scFv(FRP5), directed against the human ErbB2 growth factor receptor. The resulting 5-E2C fusion protein was expressed in E. coli and purified under native and denaturing conditions. Refolded and native 5-E2C were found to bind specifically to ErbB2-expressing cells, indicating that scFv(FRP5) in 5-E2C was functional in both preparations. In contrast, whereas refolded 5-E2C bound DNA only weakly, significant DNA binding was observed for native 5-E2C. In addition, it could not only be shown that the interaction of native 5-E2C with DNA containing its recognition sequence was specific, but also that this protein was able to bind DNA and recombinant ErbB2 simultaneously, demonstrating the functionality of both domains in native 5-E2C. Despite these encouraging results, the inclusion of native 5-E2C in pL- or polyethyleneimine (PEI)-DNA complexes did not lead to an (5-E2C-specific) enhancement of gene transfer efficiency, irrespective of the presence of the endosome-disruptive reagent chloroquine during transfection. In the second part of this thesis an alternative approach for the development of DNA-carrier proteins for nonviral gene delivery is described, based on human HMGB2, a DNA-binding protein without sequence specificity. HMGB2 contains an acidic C-terminus that has been found to decrease the affinity of the protein for DNA. Therefore, this C-terminal tail was deleted, resulting in an HMGB2-variant consisting of amino acids 1-186. HMGB2186, purified under native conditions from E. coli lysates, was able to interact with DNA and bound to the surface of different cell lines. Importantly, after binding to plasmid DNA HMGB2186 mediated gene delivery into COS-7 cells with higher efficiency than pL. In addition, HMGB2186-mediated gene transfer was strongly enhanced in the presence of chloroquine, indicating that the endocytic pathway was involved in cellular uptake. To improve internalization and intracellular routing of HMGB2186 as a DNA-carrier, a derivative containing the TAT47-57 cell-penetrating peptide (CPP), reported to facilitate cell entry independent of endocytosis, was constructed. Since this peptide also contains an NLS, in addition an HGMB2186-variant containing the SV40-NLS was constructed to investigate the effect of a peptide that has only nuclear localizing properties. Interestingly, the resulting TAT-HMGB2186 and SV40-HMGB2186 fusion proteins displayed DNA-binding activities similar to HMGB2186, but mediated gene delivery into different cell lines clearly more efficiently than the parental molecule. Furthermore, the efficacy of both fusion proteins was enhanced markedly in the presence of chloroquine, an indication that endocytosis was involved in the transfection process mediated by these proteins. This suggests that the increased transfection efficiency observed for TAT-HMGB2186 was more likely due to the NLS function present in the TAT47-57 peptide, rather than to its ‘cell penetrating properties’. Finally, the incorporation of functional peptides derived from human proteins into HMGB2186 was investigated. An uncharged CPP originating from Kaposi-FGF, reported to facilitate efficient cellular uptake of fused protein domains in an endocytosis-independent manner, was fused to HMGB2186 together with the SV40-NLS. Interestingly, the resulting KSV40-HMGB2186 fusion protein bound DNA similarly as previously tested DNA-carrier proteins, but did not mediate enhanced transfection compared to HMGB2186. In addition, the importin-b-binding (IBB) domain derived from human importin-a2 was investigated as a component of a DNA-carrier protein. Since the IBB domain can function as an NLS, it was fused to HMGB2186 resulting in the DNA-carrier protein IBBHMGB2186. Although IBB-HMGB2186 bound DNA in a similar manner as the other HMGB2186-derivatives, gene delivery mediated by IBB-HMGB2186 was only as effective as HMGB2186 mediated transfection, suggesting no significant role of the IBB domain. However, addition of chloroquine resulted in a remarkable enhancement of IBB-HMGB2186-mediated gene transfer, which was now more efficient than with any other HMGB2186-variant tested, and not much lower than gene transfer mediated by PEI, one of the most efficient transfection reagents available to date. To enhance nonviral gene delivery even further, the HMGB2186-based DNA-carrier proteins described in this thesis might now serve as building blocks for novel fusion proteins that include additional complementing activities. In this respect it seems particularly promising that, under conditions of effective end some escape, IBB-HMGB2186, which consists entirely of protein domains of human origin, was the most efficient of all proteins tested in this work.
RcsB is a central transcriptional regulator in enteric bacteria involved in exopolysaccharide (EPS) biosynthesis, in cell division, in the expression of osmoregulated genes, and regulates at least 20 other genes and operons. It is a member of a phosphorelay system and signal transfer is mediated by phosphorylation through the RcsC/YojN phosphorelay. RcsB proteins modified with the phosphorylation mimic BeF3- as shown by its conformational changes and DNA binding properties and resulted phosphorylated RcsB derivatives with sufficient stability. Both, the wild type RcsB protein and the mutant RcsBD11A could be modified with BeF3-. Non-phosphorylated RcsB has been shown to bind as a heterodimer with the coinducer RcsA at the conserved RcsAB box in Rcs regulated promoters. In this study, it has been shown that the modification of RcsB by BeF3 - (I) has a negative effect on its homodimerization, (II) abolishes the complex formation of RcsAB with the RcsAB box as shown by the EMSA and SPR technique. All the effects were found to be reversible by increasing the NaF concentration in the assays presumably leading to the formation of the inactive BeF4 2- salt. This hypothesis of RcsB being modified by BeF3- was also supported by other phosphodonors like ATP and acetyl phosphate, both of them showed the same negative effect on DNA binding by RcsAB heterodimer giving evidence that BeF3- could be used as a phosphorylation mimic. In addition, the phosphorylation mimic BeF3- was found to be a better phosphorylating agent than ATP and acetyl phosphate. This is the first evidence that phosphorylation of RcsB might have a negative effect on the activation of RcsAB regulated operons. Autophosphorylation of RcsB proves that it has the ability to take up phosphoryl groups and the mutant protein also become autophosphorylated with less efficiency or stability than the wild type protein. RcsB probably takes up phosphoryl groups through RcsC -> YojN -> RcsB phosphorelay pathway. To study the interaction among the proteins in this pathway, fluorescence spectroscopy, NMR spectroscopy, and an in vivo ß galactosidase assay were performed by using two domains of RcsC (T-RcsC and R-RcsC), HPt domain of the protein YojN, and RcsB. The interactions between R-RcsC/YojN-HPt and YojN-HPt/RcsB supports the proposed pathway of phosphorylating RcsB. RcsB might also be phosphorylated by YojN-HPt that is phosphorylated by other sensor kinase other than RcsC in a cross-talk mechanism. The phosphorylation of RcsB by YojN-HPt probably has the same negative effect on cps induction as obtained with BeF3 - effect on DNA binding by RcsAB heterodimer.
The cytochrome bc1 complex is a cornerstone in bioenergetic electron transfer chains, where it carries out tasks as diverse as respiration, photosynthesis, and nitrogen fixation. This homodimeric multisubunit membrane protein has been studied extensively for several decades and the enzyme mechanism is described with the modified protonmotive Q cycle. Still, the molecular and kinetic description of the catalytic cycle is not complete and questions remain regarding the bifurcation of electron transfer at the quinol oxidation (Qo) site, substrate occupancy, pathways of proton conduction, and the nature of the Rieske protein domain movement. We used competitive inhibitors to study the molecular architecture at the Qo site with X-ray crystallography. The structure of the enzyme with the substrate analog 5-n-heptyl-6-hydroxy-4,7-dioxobenzothiazole (HHDBT) bound at the Qo site was determined at 2.5 Å resolution. Spectroscopic studies showed that HHDBT is negatively charged when bound at the active site. Mechanistic interpretations from inhibitor binding are in line with single occupancy model for quinol oxidation and structural analysis supports the proposed proton transfer pathway. For functional insight into the enzyme mechanism, redox-sensitive protonation changes were studied by Fourier transform infrared spectroscopy. The protein purification procedure was optimized for less delipidation and the isolated enzyme was more active. Furthermore, two new phospholipids were identified in the X-ray structures, including a cardiolipin. Strikingly, conserved lipid binding cavities were observed in structural comparison with homologous enzymes. The functional role of tightly bound phospholipids will be discussed. Finally, the Qo site is a target for various compounds of agricultural and pharmaceutical importance. Importantly, the X-ray structures permit detailed analysis of the molecular reasons for acquired resistance to and treatment failure of Qo site inhibitors, such as atovaquone, that is used to treat malaria and pneumonia, as discussed herein.
A new experimental setup, for pump-probe fs DFWM measurements, which is based on a femtosecond laser system, has been constructed. It allows for the investigation of molecular species in the gas phase at different temperatures, from ~30 K in a seeded supersonic jet up to ~500 K in a heat-pipe oven. In comparison to other RCS methods the employed fs DFWM technique is less complicated and gives much higher signal-to-noise ratio [BFZ86, FeZ95a, CKS89, CCH90, HCF91, WRM02, Rie02]. A general computer code for the simulation of fs DFWM spectra of nonrigid asymmetric top molecules has been developed. This new DFWM code in combination with a non-linear fitting routine allows one to determine rotational and centrifugal distortion constants and obtain information on the polarizability tensor components from the experimental spectra. Fs DFWM spectroscopy was successfully applied to the medium-sized molecules benzene and benzene-d6 in a gas cell and in a supersonic jet. The spectrum from a seeded expansion has been measured up to delay time of 3.9 ns (restricted by the length of the delay stage) with excellent signal-to-noise ratio (102-103). In that way 87 and 72 J-type transients have been recorded for benzene and benzene-d6, correspondingly. A relative accuracy on the order of 10-5 has been achieved for the rotational constant. From the room temperature experiments, precise values of centrifugal distortion constants DJ and DJK have been extracted. The literature data for cyclohexane have been revised and a new precise rotational constant B0 has been obtained, which is (+5.5 MHz) shifted from the one reported in the former Raman investigation by Peters et al. [PWW73]. Additionally, high-level ab initio calculations of cyclohexane have been carried out using a large number of basis sets at several levels of theory. In particular, the vibrational averaging effects have been examined in order to critically compare the experimentally determined and theoretically evaluated rotational constants. The contribution of highly symmetric vibrational modes to vibrational averaging effects was clarified. More structural information could be obtained from fs DFWM measurements of asymmetric top species, since different type of rotational recurrences can appear, and all three rotational constants (A, B, C) can be extracted. On the other hand the analysis of the asymmetric top spectra is no longer trivial. In fact the simple formula for rotational recurrence periods of symmetric top species (Tab. 2.1) can not be applied to asymmetric top molecules. Thus, in order to extract high-resolution data for asymmetric species, a complete fitting of the experimental spectra is necessary. The fs DFWM and (1+2') PPI method have been applied to the asymmetric top molecules pyridine in the ground (S0) and pDFB in the S0 and electronically excited (S1) states. By fitting the measured fs DFWM spectra the rotational and centrifugal distortion constants have been extracted with good precision and the value of the parametrized polarizability angle of pDFB was obtained. In this work, the first application of fs DFWM spectroscopy to a molecular cluster has been reported. Also, the chemical equilibrium between monomeric and dimeric species was studied. In particular formic and acetic acid have been investigated in a gas cell and in a supersonic expansion. Many spectral features have been observed and analized in the fs DFWM spectrum of formic acid vapor in a gas cell at room temperature. Most of them were attributed to rotational recurrences of the formic acid monomer, but also spectral feature originating from the formic acid dimer of O-H×××O/O×××H-O type have been detected and analyzed. From the fitted simulation, the rotational and centrifugal distortion constants, and parametrized polarizability angle were extracted for the dimeric structure of O-H×××O/O×××HO type. With the assumption of unperturbed monomers a center-of-mass distance of R = 2.990 ± 0.001 Å for the monomers within the dimer has been calculated from the spectroscopic results. This distance is 0.028 Å smaller than that reported from electron diffraction [ABM69]. Thus, the centers-of-mass distance was assigned as the main point of disagreement between results of fs DFWM and electron diffraction experiments. In contrast to formic acid, acetic acid shows strong recurrences from dimeric species even in the fs DFWM spectra at room temperature. This is explained in terms of different symmetry of the moments-of-inertia tensor, which modulates the intensity of RRs (the fs DFWM signal is in general stronger from symmetric species). Due to the symmetric nature of the acetic acid dimer, only the sum (B+C) of the rotational constants has been extracted. The changes of geometrical parameters upon dimer formation have been analyzed for, both, formic and acetic acid. A heat-pipe oven has been used in order to overcome the main drawback of fs DFWM spectroscopy – the square dependence of the signal intensity on the sample number density. Two-ring molecules (cyclohexylbenzene, para-cyclohexylaniline and nicotine) with low vapor pressure (<0.1 mbar) at room temperature have been investigated. From the analysis of the experimental and ab-initio results for CHB and pCHA a nearly perpendicular conformation of the aromatic vs. cyclohexane ring for both system is inferred. The enlargement of the benzene ring of CHB in the electronically excited state (S1) has been found to cause the smaller rotational constants in S1. This conclusion has been drawn from the comparison of the ground and electronically excited state experimental rotational constants in combination with ab-initio calculations. The extraction of precise structural information for nicotine was not possible due to it weak fs DFWM signal. However, the fact that fs DFWM technique can be applied to conformational analysis of molecular species in an equilibrium mixture opens other applications for this kind of spectroscopy. In general the results obtained in this work show that the fs DFWM technique, being an experimental implementation of RCS, provides one with an important tool for structural analysis of molecular species in the gas phase in particular for the species to which microwave spectroscopy can not be applied. It gives spectra with excellent signal-to-noise ratio even at low number density samples expanded in a seeded supersonic jet. It provides an alternative and innovative approach towards rotational Raman spectroscopy of large polyatomic molecules applicable under various experimental conditions (broad temperature and pressure range). With the introduction of femtosecond (10-15s) laser pulses (usually picosecond (10-12s) laser pulses were used in RCS) an improvement in time-resolution and therefore in precision for the rotational constants by more than one order of magnitude has been achieved. Molecular systems in the ground electronic state without permanent dipole moment and chromophore can be studied with high precision, providing thereby molecular benchmark systems for the electronic structure theory. As has been shown, the study of molecular clusters by fs DFWM spectroscopy is possible, but its potential are restricted by the square dependence of the fs DFWM signal from the sample number density, which is even more important for supersonic jet expansions. Here, the application of near-resonant and resonant FWM schemes should help in order to compensate for the low sample concentration. With the introduction of the heat pipe oven for fs DFWM experiments, the investigation of large nonvolatile molecules under equilibrium conditions is possible now. In our laboratory the first results on the structural analysis of different conformers of pyrrolidine in the gas phase have been obtained [MaR04]. This method can have even more prospects for the structural investigations of large molecular species in combination with new non-thermal gas phase sources for nonvolatile molecules, like laser desorption [CTL89], laser oblation [MHL83], electrospray [FMM90], laser induced liquid beam ion desorption [KAB96, Sob00] etc. A very recent application of the fs DFWM technique is the investigation of the influence of strong laser fields on molecular gas phase sample, which could range from active alignment [PPB03] over molecular deformation to field ionization [CSD03]. In regards to future development in fs DFWM spectroscopy for more complex molecules one has to take into account, how large amplitude motions such as the van der Waals vibrations or internal rotation (see section 6.4.2) affect the rotational coherences. In any case, femtosecond Degenerate Four-Wave Mixing as experimental implementation of Rotational Coherence Spectroscopy can be considered as an innovative, developing, and powerful method for the structural investigation of the molecular species, which are hard to study by classical frequency-resolved spectroscopy [FeZ95a, Dan01, Rie02].
Calcium-activated potassium channels are fundamental regulators of neuron excitability. SK channels are activated by an intracellular increase of Ca++ (such as occurs during an action potential). They have a small single channel conductance (less than 20pS) and show no voltage dependence of activation. To date, there are only a few examples of high-resolution structures of eukaryotic membrane proteins. All of them were purified from natural sources. Since no abundant natural sources of eukaryotic K+ channels are available we overexpressed rSK2 in order to produce the quantities necessary for structural analysis. Unfortunately the Pichia pastoris expression system did not yield sufficient amount of pure protein, mainly because most of the protein was retained by in the ER and was only partially soluble. Subsequently, two constructs were expressed: SK2-FCYENE (containing a specific sequence that promotes surface expression), and SK2-q-CaM a concatamer of SK2 and calmodulin. Although these proved an improvement in terms of solubilisation, little improvement was found in terms of amounts of purified material obtained. For this reason we tested the Semliki Forest virus expression system, since the protein is expressed in a mammalian system where we hoped that it would be trafficked in the same way as in vivo. Using this system it was possible to express rSK2 and solubilise it with several detergents and to achieve much better purification. However, the levels were still not sufficient for high-resolution structural studies, although sufficient for single particle electron microscopy analysis.
In the present study possible sources and pathways of the gasoline additive methyl tertiary-butyl ether (MTBE) in the aquatic environment in Germany were investigated. The objective of the present study was to clarify some of the questions raised by a previous study on the MTBE situation in Germany. In the USA and Europe 12 million t and 3 million t of MTBE, respectively, are used as gasoline additive. The detection of MTBE in the aquatic environment and the potential risk for drinking water resources led to a phase-out of MTBE as gasoline additive in single states of the USA. Meanwhile there is also an ongoing discussion about the substitution of MTBE in Europe and Germany. The annual usage of MTBE in Germany is about 600,000 t. However, compared to the USA, significant less data exists on the occurrence of MTBE in the aquatic environment in Europe. Because of its physico-chemical properties, MTBE readily vaporizes from gasoline, is water soluble, adsorbs only weakly to the underground matrix and is largely persistent to biological degradation. The toxicity of MTBE remains to be completely investigated, but MTBE in drinking water has low taste- and odor thresholds of 20-40 microgram/L. The present study was conducted by collecting water samples and analyzing them for their MTBE concentrations through a combination of headspace-solid phase microextraction (HS-SPME) and gas chromatography-mass spectrometry (GC-MS). The detection limit was 10 ng/L. The method was successfully tested in the framework of an interlaboratory study and showed recoveries of reference values of 89% (74 ng/L) and 104% (256 ng/L). The relative standard deviations were 12% and 6%. The investigation of 83 water samples from 50 community water systems (CWSs) in Germany revealed a detection frequency of 40% and a concentration range of 17-712 ng/L. The detection of MTBE in the drinking water samples could be explained by a groundwater pollution and the pathway river - riverbank filtration - waterworks. Rivers are important drinking water sources. MTBE is emitted into rivers through a variety of sources. In the present study, potential point sources were investigated, i.e. MTBE production sites/refineries/tank farms and groundwater pollutions. For this purpose, the spatial distribution of MTBE in three German rivers with the named potential emission sources located close to the rivers was investigated by analyzing 49 corresponding river water samples. The influence of the potential emission sources groundwater pollution and refinery/tank farm was successfully demonstrated in certain parts of the River Saale and the River Rhine. Increasing MTBE concentrations from 24 ng/L to 379 ng/L and from 73 ng/L to 5 microgram/L, respectively, could be observed in the parts investigated in these two rivers. The identification of such emission sources is important for future modeling. Further sources of MTBE emission into surface water are industrial (non-petrochemical) and municipal sewage plant effluents. In the present study long-term monitoring of water from the River Main (n=67 samples), precipitation (n=89) and industrial (n=34) and municipal sewage plant effluents (n=66) was conducted. The comparison of the data sets revealed that maximum MTBE concentrations in the River Main of up to 1 microgram/L were most possibly due to single industrial effluents with MTBE concentrations of up to 28 microgram/L (measured in this study). The average MTBE content of 66 ng/L in the River Main most probably originated from municipal sewage plant effluents and further industrial effluents. Background concentrations of <30 ng/L could be related to the direct atmospheric input via precipitation. A certain aspect of the atmospheric MTBE input is represented by the input of MTBE into river water or groundwater through snow. In the present study 43 snow samples from 13 different locations were analyzed for their MTBE content. MTBE could be detected in 65% of the urban and rural samples. The concentrations ranged from 11-613 ng/L and were higher than the concentrations in rainwater samples formerly analyzed. Furthermore, a temperature dependency and wash-out effects could be observed. The atmospheric input of MTBE was in part also visible in the analyzed groundwater samples (n=170). The detection frequencies in non-urban and urban wells were 24% and 63%, respectively. The median concentrations were 177 ng/L and 57 ng/L. In wells located in the vicinity of sites with gasoline contaminated groundwater, MTBE concentrations of up to 42 mg/L could be observed. The MTBE emission sources and the different pathways of MTBE in the aquatic environment demonstrated in the present study and other works raise the question whether the use of MTBE in a bulk product like gasoline should be continued in the future. Currently, possible substitutes like ethyl tertiary-butyl ether (ETBE) or ethanol are being discussed.
Nitric oxide (NO) represents a short-lived mediator that pivotally drives keratinocyte movements during cutaneous wound healing. In this study, we have identified p68 DEAD box RNA helicase (p68) from a NO-induced differential keratinocyte cDNA library. Subsequently, we have analyzed regulation of p68 by wound-associated mediators in the human keratinocyte cell line HaCaT. NO, serum, growth factors and pro-inflammatory cytokines were potent inducers of p68 expression in the cells. p68 was constitutively expressed in murine skin, but rapidly down-regulated upon injury. The down-regulation appeared to be transient, as p68 protein expression increased again after the inflammatory phase of repair. However, p68 protein expression did not completely disappear during wound inflammation, as immunohistochemistry and cell fractiona tion analysis revealed a restricted localization of p68 in keratinocyte nuclei of the developing epithelium. In line, cultured human (HaCaT) and murine (PAM 212) keratinocyte cell lines showed a nuclear localization of the helicase. Moreover, confocal microscopy revealed a strong localization of p68 protein within the nucleoli of the keratinocytes. Functional analyses demonstrated that p68 strongly participates in keratinocyte proliferation and gene expression. Keratinocytes that constitutively overexpressed p68 protein were characterized by a marked increase in serum-induced proliferation and vascular endothelial growth factor (VEGF) expression, whereas down-regulation of endogenous p68 using small interfering RNA (siRNA) markedly attenuated serum-induced proliferation and VEGF expression. Altogether, our results suggest a tightly controlled expression and nucleolar localization of p68 in keratinocytes in vitro and during skin repair in vivo that functionally contributes to keratinocyte proliferation and gene expression.
The detailed mechanism of the 20 S proteasome from Thermoplasma acidophilum is unknown. Substrates are degraded processively to small fragments without the release of intermediates, but the basis for this unique degradation mode remains obscure. The proteasome is a molecular machine, but how the different nanocompartments interplay and whether more than one substrate can be treated simultaneously has not been elucidated yet. To address these questions we had to disable the functionality of one aperture in order to dissect whether the other pore can compensate for the loss. As it is challenging to introduce mutations solely around one pore aperture of the highly symmetrical construct, we chose a novel approach by unique orientation of the proteasome at interfaces. For this purpose we purified recombinant 20 S proteasomes, where hexahistidine tags were fused either around the entrances or at the sides. According to electron microscopic studies we immobilized these constructs uniformly either end-on or side-on at metal-chelating interfaces (lipid vesicles, lipid monolayers and self-assembled thiol monolayers). Degradation of small fluorogenic peptides and large proteins like casein was analyzed. Small substrates were degraded with comparable activity by free and immobilized proteasomes, irrespective of their orientation. Thus it can be assumed that peptides can pass the sealed entrance of the 'dead-end' proteasome. However, larger substrates like fluorescently labeled casein were processed near the temperature optimum by side-on immobilized and soluble proteasomes with threefold activity compared to end-on immobilized proteasomes. Hence it can be concluded that one pore is sufficient for substrate entry and product release. In other words, the pore and antechamber can fulfil a triple function in the import and unwinding of substrates and the egress of products. With means of surface plasmon resonance the exact substrate/proteasome stoichiometry could be determined to ~1 for 'dead-end' proteasomes and ~2 for side-on immobilized (active and inactive) proteasomes. Most importantly, a fit with the Hill equation revealed positive cooperativity for side-on immobilized (Hill coefficient ~2) in contrast to end-on immobilized proteasomes (Hill coefficient ~1). Thus in case of soluble proteasomes two substrates bind presumably in opposite antechambers with positive cooperativity. The off-rate of casein as substrate is twofold for the active side-on immobilized proteasome in comparison to the end-on immobilized proteasome. The exact 2:1 stoichiometry of the off-rates equals the ratio of exit pathways amenable in case of side-on orientated versus 'dead-end' immobilized proteasomes. Thus crevices along the cylindrical body of the 20 S proteasome seem not to participate in the egress of small products. An inactive proteasome mutant displays a concentration-dependent off-kinetic against casein. Accordingly, the off-rate of the bisubstrate:proteasome complex can be attributed around half the value of the monosubstrate:proteasome complex. Consequently, substrates exit the inactive proteasome via the route of access due to obstruction of the trans side with an entering substrate. Hence the active proteasomes have to chop substrates down to small fragments prior to release through both pores. Thus the processive degradation mode might result from positive binding cooperativity. The on-rate constants for casein suggested that substrate association represents a two-step process comprising a rate-limiting translocation step and a fast binding step. As fluorescence cross-correlation revealed that two substrates can be co-localized in the proteasome and bind successively with increasing affinity (KD,1 = 8 µM versus KD,2 = 700 nM), an allosteric transition in the proteasome can be assumed. Combining our results with the data from other research groups led to a mechanistic model for the 20 S proteasome. Accordingly, the first substrate undergoes a slow translocation step, binds in the antechamber and diffuses subsequently to the catalytic centers, where it is degraded. By switching on the catalytic activity, the pores at both termini are dilated via conformational changes. Hence entry of the second substrate into the proteasome is facilitated due to omission of the rate-determining translocation step. The second substrate is either accommodated in the antechamber before it is processed (alternating degradation) or, most probably, is directly threaded into the central cavity (simultaneous degradation). As effusing peptides compete with entering proteins for binding in the antechamber, the pores are kept in an open state. After finishing digestion the pores are closed and a new degradation cycle can be reinitiated. In summary, substrate association with the proteasome underlies an ordered alternating binding mechanism in contrast to the random mode of degradation. Thus the two-stroke engine offers the advantage of speeding up degradation without enhancing complexity.