Doctoral Thesis
Refine
Year of publication
- 2009 (33) (remove)
Document Type
- Doctoral Thesis (33) (remove)
Language
- English (33) (remove)
Has Fulltext
- yes (33)
Is part of the Bibliography
- no (33)
Keywords
- Biochemie (2)
- Crystallography (2)
- Licht-Sammel-Komplex (2)
- Ligand <Biochemie> (2)
- Membranproteine (2)
- Wirkstoff-Rezeptor-Bindung (2)
- ADC (1)
- Adenin (1)
- Algebraisch Diagrammatische Konstrution (1)
- Angeregter Zustand (1)
Institute
- Biochemie und Chemie (33) (remove)
This thesis demonstrates the advancement of PELDOR spectroscopy beyond its original design of distance measurements in order to disentangle a maximum amount of information additionally encoded in the PELDOR data. In particular, the successful synthesis of novel polynitroxide radicals is described as well as the extraction of the relative orientation of spin labels, conformational flexibility and the separation of dipolar and exchange coupling via orientation selective PELDOR measurements in combination with PESIM based simulations. Moreover, the method of PELDOR "Spin Counting" was experimentally validated.
Zusammenfassung Die Alzheimersche Krankheit (AD) ist mit 60% die am häufigsten auftretende Art der Demenz. Weltweit sind ca. 24 Mio. Menschen von der neurodegenerativen Krankheit betroffen, welche sich durch den Verlust der kognitiven Fähigkeiten auszeichnet. Es gibt zwei Ausprägungen der Demenz, zum einen die sporadische Verlaufsform, die bei Menschen in einem Alter ab 65 Jahren auftritt und zum anderen die familiäre Alzheimersche Krankheit (FAD), die schon weitaus jüngere Menschen betrifft und auf genetische Mutationen zurück zu führen ist. Beide Formen der Demenz zeigen den gleichen neuropathologische Phänotyp, der zur Ausbildung von extrazellulären Plaques und intrazellulären Neurofibrillen führt. Durch die Entstehung der Plaques und der Neurofibrillen werden die Verbindungen zwischen den einzelnen Neuronen verringert und die Neuronen sterben ab. Für das Auftreten der FAD sind Mutationen in den Genen des Amyloid Vorläufer Proteins (APP, Substrat) sowie der Aspartatprotease Einheit des γ-Sekretase Komplexes, Presenilin 1 (PS1) oder Presenilin 2 (PS2), verantwortlich. Die γ-Sekretase ist ein membranständiger Komplex bestehend aus den vier Untereinheiten PS1 oder PS2, Nicastrin (Nct), Aph-1 und Pen-2. Um ausreichende Informationen über den γ-Sekretase Komplex bezüglich seiner Interaktionsflächen, seines Katalysemechanismus und seiner Substraterkennung zu erhalten, wäre es hilfreich seine 3 Dimensionale Struktur aufzuklären, wozu große Mengen der sauberen und homogenen Proteine benötigt werden. Die Herstellung von ausreichenden Proteinmengen stellt derzeit aber einen Engpass für die strukturelle und funktionelle Charakterisierung des γ-Sekretase Komplexes in-vitro dar. Alzheimer’s disease (AD) is the most common cause of dementia, which affects 24 million people worldwide. It is a neurodegenerative disorder, which occurs either in its most common form in people over 65 years or in the rare early-onset familial AD (FAD). Responsible for the autosomal dominant FAD are mutations in the genes encoding for the β-amyloid precursor protein (APP) and the two homologues integral membrane proteins Presenilin 1 (PS1) and Presenilin 2 (PS2). The two PSs are major but alternative components of the intramembrane aspartyl protease γ-secretase. Further components are the membrane proteins Nicastrin (Nct), Aph-1 and Pen-2. Production of sufficient amounts of protein samples is still the major bottleneck for the detailed functional and structural in-vitro characterization of the γ-secretase complex. Due to toxicity, stability and targeting problems, the overproduction of MPs in conventional in-vivo systems often has only limited success. Therefore, efficient expression protocols using the cell-free (CF) system were established in this work. After optimization, I was able to produce up to milligram amounts of the single proteins PS1 and PS2, the cleavage products PS1-NTF and PS1-CTF, and Pen-2. The in-vitro produced γ-secretase subunits were further characterized, concerning their purity, secondary fold, thermal stability and homogeneity. Highest purities with over 90% after affinity chromatography could be achieved for PS1-CTF and Pen-2. Reconstitution of PS1, PS1-NTF, PS1-CTF and Pen-2 into E. coli liposomes results in a homogeneously distribution, which gives evidence for a structural folding. This was confirmed by CD spectroscopy of PS1-CTF and Pen-2. The thermal stability of Pen-2 shows a transition at 68°C, whereas PS1-CTF is stable up to 95°C. Both proteins show in addition homogeneous elution profiles investigated by analytical SEC and exhibit a monomeric (Pen-2) or dimeric (PS1-CTF) character analyzed by blue native PAGE. Different methods were performed to get evidence about the assembly of the complex, like pull-down experiments, immunoprecipitation, co-expression of radioactive labeled subunits and titration assays by liquid-state NMR. First hints for an interaction of the CF synthesized proteins could be observed by co-expression. Supplemental, Pen-2 and CTF could be purified in sufficient amounts and to apparent homogeneity that allow structural approaches by X-ray crystallography and liquid-state NMR spectroscopy. First conditions for protein crystals were achieved for Pen-2 and structural investigations of PS1-CTF by liquid-state NMR could be performed after optimization of the expression-, purification- and detergent conditions.
Orthopoxviruses are large DNA viruses that replicate within the cytoplasm of infected cells encoding over a hundred different proteins. The orthopoxviral 68k ankyrin‐like protein (68k‐ank) is highly conserved among orthopoxviruses, and this study aimed at elucidating the function of 68k‐ank. The 68k‐ank protein is composed of four ankyrin repeats (ANK) and an F‐box‐like domain; both motifs are known proteinprotein interaction domains. The F‐box is found in cellular F‐box proteins (FBP), crucial components of cellular E3 ubiquitin (Ub) ligases. With yeast‐two‐hybrid screens and subsequent co‐immunoprecipitation analyses, it was possible to identify S‐phase kinase‐associated protein 1a (Skp1a) as a cellular counterpart of 68k‐ank via binding to the F‐box‐like domain. Additionally, Cullin‐1 was co‐precipitated, suggesting the formation of a viral‐cellular SCF E3 Ub ligase complex. Modified Vaccinia virus Ankara (MVA) ‐ being attenuated and unable to replicate in most mammalian cell lines due to a block in morphogenesis – nevertheless, expresses its complete genetic information attributing to its properties as promising vector vaccine. Conservation of 68k‐ank as the only ANK protein encoded by MVA implied a substantial role of this viral factor. Hence, its function in the viral life cycle was assessed by studying a 68k‐ank knock‐out MVA. A mutant phenotype manifested in nonpermissive mammalian cells characterized by a block succeeding viral early gene expression and by a reduced ability of the virus to shutoff host protein synthesis. Studies with MVA encoding a 68k‐ank F‐box‐like domain truncated protein revealed that viral‐cellular SCF complex formation and maintenance of viral gene expression are two distinct, unrelated functions fulfilled by 68k‐ank. Moreover, K1, a well‐described VACV host range factor of the ANK protein family, is able to complement 68k‐ank function. This suggests that gene expression of MVA putatively depends on the ANKs encoded in 68k‐ank. In addition to the important findings in vitro, first virulence studies with the mouse pox agent, ectromelia virus (ECTV) deleted of the 68k‐ank ortholog (C11) suggested that this factor contributes to ECTV virulence in vivo.
1. Fab co-complexes of proton pumping NADH:ubiquinone oxidoreductase (complex I) Fab fragments suitable for co-crystallization with complex I were generated using an immobilized papainbased protocol. The binding of the antibody fragments to complex I was verified using Surface Plasmon Resonance and size exclusion chromatography. The binding constants of the antibodies and their respective Fab fragments were found to be in the nanomolar range. This work presents the first report on successful crystallization of complex I (proton pumping NADH:ubiquinone oxidoreductase) from Yarrowia lipolytica with proteolytic Fab fragments. The quality of the crystals was significantly improved when compared to the initial experiments and the best crystals diffracted X-rays to a resolution of ~7 Å. The activity of complex I remained uninfluenced by antibody fragment binding. The initial diffraction data suggest that the complex I/Fab co-complex crystals represent a space group different to the one observed for the native protein. Ongoing experiments are aimed at further enhancements of the diffraction quality of the crystals. Providing a different space group the CI/Fab co-complexes may become a very useful approach for structure determination of the enzyme. Moreover, the bound Fab offers an additional possibility to generate phase information. The antibody-mediated crystallization represents a valuable tool in structural characterization of the NADH:oxidoreductase subcomplexes or even single subunits. 2. UDP-glucose pyrophosphorylase UDP-glucose pyrophosphorylase from Yarrowia lipolytica displays affinity towards Ni2+ NTA and was first detected in a contaminated sample of complex I. Following, separation from complex I, Ugp1p was purified using anion exchange chromatography. Sequence similarity studies revealed high identity to other known pyrophosphorylases. As indicated by laser-based mass spectrometry method (LILBID) Ugp1p from Y. lipolytica builds octamers similarly to the enzyme from Saccharomyces cerevisiae. The initial crystals grew as thin needles favorably in sitting drop setups. The size of the crystals was increased by employment of a micro batch technique. The improved crystals diffracted X-rays to a resolution of 3.2 Å at the synchrotron beamline. Structural characterization is under way using a molecular replacement approach based on the published structure of baker’s yeast UGPase.
Photo-initiated processes, like photo-excitation and -deexcitation, internal conversion, excitation energy transfer and electron transfer, are of importance in many areas of physics, chemistry and biology. For the understanding of such processes, detailed knowledge of excitation energies, potential energy surfaces and excited state properties of the involved molecules is an essential prerequisite. To obtain these informations, quantum chemical calculations are required. Several quantum chemical methods exist which allow for the calculation of excited states. Most of these methods are computationally costly what makes them only applicable to small molecules. However, many biological systems where photo-processes are of interest like light-harvesting complexes in photosynthesis or the reception of light in the human eye by rhodopsin are quite large. For large systems, however, only few theoretical methods remain applicable. The currently most widely used method is time-dependent density functional theory (TD-DFT), which can treat systems of up to 200–300 atoms with the excitation energies of some excited states exhibiting errors of less than 0.5 eV. Yet, TD-DFT has several drawbacks. The most severe failure of TD-DFT is the false description of charge transfer states which is particularly problematic in case of larger systems where it yields a multitude of artificially low-lying charge transfer states. But also Rydberg states and states with large double excitation character are not described correctly. Still, if these deficiencies are kept in mind during the interpretation of results, TD-DFT is a useful tool for the calculation of excited states. In my thesis, TD-DFT is applied in investigations of excitation energy and electron transfer processes in light-harvesting complexes. Since light-harvesting complexes, which consist of thousands of atoms, are by far too large to be calculated, model complexes for the processes of interest are constructed from available crystal structures. The model complexes are used to calculate potential energy curves along meaningful reaction coordinates. Artificial charge transfer states are corrected with the help of the so-called ∆DFT method. The resulting potential energy curves are then interpreted by comparison with experimental results. For the light-harvesting complex LH2 from purple bacteria the experimentally observed formation of carotenoid radical cations is studied. It is shown that the carotenoid radical cation is formed most likely via the optically forbidden S1 state of the carotenoid. In light-harvesting complex LHC-II of green plants the fast component of the so-called non-photochemical quenching (NPQ) is investigated. Two of several different hypotheses on the mechanism of NPQ, which have been proposed recently, are studied in detail. The first one suggests that NPQ proceeds via simple replacement of violaxanthin by zeaxanthin in the binding pocket in LHC-II. However, the calculated potential energy curves exhibit no difference between violaxanthin and zeaxanthin in the binding pocket. In combination with experimental results it is thus shown that simple replacement alone does not mediate NPQ in LHC-II. The second hypothesis proposes conformational changes of LHC-II that lead to quenching at the central lutein and chlorophyll molecules during NPQ. My TD-DFT calculations demonstrate that if this mechanism is operative, only the lutein 1 which is one of two central luteins present in LHC-II can take part in the quenching process. This is corroborated by recent experiments. Though several conclusions can be drawn from the investigations using TD-DFT, the interpretability of the results is limited due to the deficiencies of the method and of the models. To overcome the methodological deficiencies, more accurate methods have to be employed. Therefore, the so-called algebraic diagrammatic construction scheme (ADC) is implemented. ADC is a widely overlooked ab initio method for the calculation of excited states, which is based on propagator theory. Its theoretical derivation proceeds via perturbation expansion of the polarization propagator, which describes electronic excitations. This yields separate schemes for every order of perturbation theory. The second order scheme ADC(2), which is employed here, is the equivalent to the Møller-Plesset ground state method MP(2), but for excited states. It represents the computationally cheapest excited state method which can correctly describe doubly excited states, as well as Rydberg and charge transfer states. The quality of ADC(2) results is demonstrated in calculations on linear polyenes which serve as model systems for the larger carotenoid molecules. The calculations show that ADC(2) describes the three lowest excited states of polyenes sufficiently well, particularly the optically forbidden S1 state which is known to possess large double excitation character. Yet, the applicability of the method is limited compared to TD-DFT due to the much larger computational requirements. To facilitate the calculation of larger systems with ADC(2) a new variant of the method is developed and implemented. The variant employs the short-range behavior of electron correlation to reduce the computational effort. As a first step, the working equations of ADC(2) are transformed into a basis of local orbitals. In this basis negligible contributions of the equations which are due to electron correlation can be identified based on the distances of local orbitals. A so-called “bumping” scheme is implemented which removes the negligible parts during a calculation. This way, the computation times as well as the disk space requirements can be reduced. With the “bumping” scheme several new parameters are introduced that regulate the amount of “bumping” and thereby the speed and the accuracy of computations. To determine useful values for the parameters an evaluation is performed using the linear polyene octatetraene as test molecule. From the evaluation an optimal set of parameter values is obtained, so that the computation times become minimal, while the errors in the excitation energies due to the “bumping” do not exceed 0.15 eV. With further calculations on various molecules of different sizes it is tested if these parameter values are universal, i.e. if they can be used for all molecules. The test calculations show that the errors in the excitation energies are below 0.15 eV for all test systems. Additionally, no trend is visible for the errors that their magnitude might depend on the system. In contrast, the amount of disregarded contributions in the calculations increases drastically with growing system size. Thus, the local variant of ADC(2) can be used in future to reliably calculate excited states of systems which are not accessible with conventional ADC(2).
Specific functions of biological systems often require conformational transitions of macromolecules. Thus, being able to describe and predict conformational changes of biological macromolecules is not only important for understanding their impact on biological function, but will also have implications for the modelling of (macro)molecular complex formation and in structure-based drug design approaches. The “conformational selection model” provides the foundation for computational investigations of conformational fluctuations of the unbound protein state. These fluctuations may reveal conformational states adopted by the bound proteins. The aim of this work is to incorporate directional information in a geometry-based approach, in order to sample biologically relevant conformational space extensively. Interestingly, coarse-grained normal mode (CGNM) approaches, e.g., the elastic network model (ENM) and rigid cluster normal mode analysis (RCNMA), have emerged recently and provide directions of intrinsic motions in terms of harmonic modes (also called normal modes). In my previous work and in other studies it has been shown that conformational changes upon ligand binding occur along a few low-energy modes of unbound proteins and can be efficiently calculated by CGNM approaches. In order to explore the validity and the applicability of CGNM approaches, a large-scale comparison of essential dynamics (ED) modes from molecular dynamics (MD) simulations and normal modes from CGNM was performed over a dataset of 335 proteins. Despite high coarse-graining, low frequency normal modes from CGNM correlate very well with ED modes in terms of directions of motions (average maximal overlap is 0.65) and relative amplitudes of motions (average maximal overlap is 0.73). In order to exploit the potential of CGNM approaches, I have developed a three-step approach for efficient exploration of intrinsic motions of proteins. The first two steps are based on recent developments in rigidity and elastic network theory. Initially, static properties of the protein are determined by decomposing the protein into rigid clusters using the graph-theoretical approach FIRST at an all-atom representation of the protein. In a second step, dynamic properties of the molecule are revealed by the rotations-translations of blocks approach (RTB) using an elastic network model representation of the coarse-grained protein. In the final step, the recently introduced idea of constrained geometric simulations of diffusive motions in proteins is extended for efficient sampling of conformational space. Here, the low-energy (frequency) normal modes provided by the RCNMA approach are used to guide the backbone motions. The NMSim approach was validated on hen egg white lysozyme by comparing it to previously mentioned simulation methods in terms of residue fluctuations, conformational space explorations, essential dynamics, sampling of side-chain rotamers, and structural quality. Residue fluctuations in NMSim generated ensemble is found to be in good agreement with MD fluctuations with a correlation coefficient of around 0.79. A comparison of different geometry-based simulation approaches shows that FRODA is restricted in sampling the backbone conformational space. CONCOORD is restricted in sampling the side-chain conformational space. NMSim sufficiently samples both the backbone and the side-chain conformations taking experimental structures and conformations from the state of the art MD simulation as reference. The NMSim approach is also applied to a dataset of proteins where conformational changes have been observed experimentally, either in domain or functionally important loop regions. The NMSim simulations starting from the unbound structures are able to reach conformations similar to ligand bound conformations (RMSD < 2.4 Å) in 4 out of 5 cases of domain moving proteins. In these four cases, good correlation coefficients (R > 0.7) between the RMS fluctuations derived from NMSim generated structures and two experimental structures are observed. Furthermore, intrinsic fluctuations in NMSim simulation correlate with the region of loop conformational changes observed upon ligand binding in 2 out of 3 cases. The NMSim generated pathway of conformational change from the unbound structure to the ligand bound structure of adenylate kinase is validated by a comparison to experimental structures reflecting different states of the pathway as proposed by previous studies. Interestingly, the generated pathway confirms that the LID domain closure precedes the closing of the NMPbind domain, even if no target conformation is provided in NMSim. Hence, the results in this study show that, incorporating directional information in the geometry-based approach NMSim improves the sampling of biologically relevant conformational space and provides a computationally efficient alternative to state of the art MD simulations.
SIVsmmPBj-derived lentiviral vectors are capable of efficient primary human monocyte transduction, a capacity which is linked to the viral accessory protein Vpx. To enable novel gene therapy approaches targeting monocytes, in this thesis it was aimed to generate enhanced lentiviral vectors that meet the required standards for clinical applications with respect to gene transfer efficiency and safety. The vectors were tested for their suitability in a relevant therapeutic gene transfer approach. At first, it was investigated whether vectors derived from another Vpx-carrying lentivirus reveal the same capacity for monocyte transduction as SIVsmmPBj-derived vectors. A transduction experiment using HIV-2-derived vectors in comparison to PBj-derived vectors revealed a comparable transduction capacity, thus disproving the assumed uniqueness of the PBj vectors. The further generation and analysis of expression constructs for the vpx genes of HIV-2 and SIVmac demonstrated a similar functionality in monocyte transduction as the Vpx of PBj. As VpxPBj, both Vpx proteins facilitated monocyte transduction of a vpx-deficient PBj-derived vector system. For the generation of enhanced SIVsmmPBj and HIV-2 vector systems, only the transfer vectors were optimized, since the packaging vectors available already meet current standards. At first, several modifications were introduced into an available preliminary PBj-derived transfer vector by conventional cloning. The modifications included insertions of cPPT/CTS and WPRE as well as the deletions of the remaining pol sequence, the second exons of tat end rev, and the U3-region within the 3’LTR to generate a SIN vector. Thus, beside safety enhancement, the vector titers were also increased from 9.1x105 TU/ml achieved after concentration with the initial transfer vector up to 1.1x107 TU/ml with the final transfer vector. The PBj vector retained its capability of monocyte transduction when supplemented with Vpx. This conventional method of vector enhancement is time-consuming and may result in only sub-optimal vectors, since it depends on the presence of restriction sites which may not allow deletion of all needless sequences. Moreover, mutations may accumulate during the high number of cloning and amplification steps. Therefore, a new and easier method for lentiviral transfer vector generation was conceived. Three essential segments of the viral genome (5‘ LTR, RRE, ΔU3-3’ LTR) are amplified on the template of the lentiviral wild-type genome and fused by Fusion-PCR. Further necessary elements namely the cPPT/CTS-element, MCS, and PPT are included into the resulting vector by extension of the nucleotide primers used for the PCRs. The amplified and fused vector-scaffold can easily be integrated into a plasmid backbone, followed by insertion of the expression cassette of choice. By applying this approach, two novel lentiviral transfer vectors, based on the non-human SIVsmmPBj and the human HIV-2, were derived. Vector titers achieved for PBj and HIV-2 vectors supplemented with Vpx reached up to 4.0x108 TU/ml and 5.4x108 TU/ml, respectively. The capacity for monocyte transduction was maintained. Thus, safe and efficient, state of the art HIV-2- and PBj-derived vector systems are now available for future gene therapy strategies. Finally, the new vectors were used to set up an approach for gene correction of gp91phox-deficient monocytes for the treatment of X-linked chronic granulomatous disease (xCGD). The administration of autologous, gene-corrected monocytes to counteract systemic and acute infections could lead to a decreased infection load, dissolve granulomas and therefore improve the survival rate of hematopoietic stem cell transplantation (HSCT) which is the current treatment of choice for this disease. First, methods for analysis of gp91phox function were established. Next, they were employed to demonstrate the capacity of monocytes, obtained from healthy humans or mice, for phagocytosis, oxidative burst, and Staphylococcus aureus killing. The in vivo half-life of murine monocytes in the bloodstream and their distribution to specific tissues was determined. Lastly, HIV-1 vectors were used to transfer the gp91phox gene into monocytes from gp91phox-deficient mice. This resulted in the successful restoration of the oxidative burst ability in the cells. In summary, the general suitability of the new vectors for treatment of CGD by monocyte transduction was demonstrated. The results of the mouse experiments provide the foundation for future challenge experiments to evaluate the capability of gene-corrected monocytes to kill off microbes in vivo.
A solid-supported membrane (SSM) is an alkanethiol/lipid hybrid membrane with comparable lipid mobility, conductivity, and capacitance than a black lipid membrane (BLM). However, mechanical perturbations, which usually destroy a BLM, do not influence the life-time of a SSM, which is mechanically so stable that solutions may be rapidly exchanged at its surface. This key property has been utilized in this thesis to characterize electrophysiologically two bacterial secondary active transporters (MelB and LacY) as well as to investigate the specific interactions between ions and lipid membranes. These three different projects are summarized below: (1) The properties of lipid membranes, which represent the most important biological interface between intracellular and extracellular compartments, are essentially modulated by the ionic composition of the surrounding aqueous medium. To investigate specific interactions between ions and lipid membranes, solutions of different ionic composition were exchanged at the surface of a SSM through a flow system. This solution exchange resulted in charge translocations that were interpreted in terms of binding of the ions to the lipid headgroups at the SSM surface. We found that chaotropic anions and kosmotropic cations are attracted to the membrane independent of the membrane composition. In particular, the same behaviour was found for lipid headgroups bearing no charge like monoolein. This general trend is modulated by the electrostatic interaction of the ions with the lipid headgroup charge. Our experimental results are in agreement with recent molecular dynamic simulations of PC membranes. (2) Rapid solution exchange on a solid-supported membrane (SSM) is investigated using fluidic structures and a solid-supported membrane in a wall jet geometry. The flow was analyzed with a new technique based on specific ion interactions with the surface combined with an electrical measurement. The critical parameters affecting the time course of the solution exchange and the transfer function describing the time resolution of the SSM system were determined. The experimental data indicate that the solution transport follows a plug flow geometry while the rise of the surface concentration can be approximated by Hagen Poiseuille flow with ideal mixing at the surface of the SSM. Using an improved cuvette design a solution exchange as fast as 2 ms was achieved at the surface of a solid supported membrane. As an application of the technique the rate constant of a fast electrogenic reaction in the melibiose permease MelB, a bacterial (Escherichia coli) sugar transporter, is determined. For comparison, the kinetics of a conformational transition of the same transporter was measured using stopped-flow tryptophan fluorescence spectroscopy. The relaxation time constant obtained for the charge displacement agrees with that determined in the stopped-flow experiments. This supports the previous proposition that upon sugar binding MelB undergoes an electrogenic conformational transition with a rate constant of k ~ 250 s-1. (3) Electrogenic events due to activity of wild-type lactose permease from Escherichia coli (LacY) were investigated with proteoliposomes containing purified LacY adsorbed on a solid-supported membrane electrode. Downhill sugar/H+ symport into the proteoliposomes generates transient currents. Studies at different lipid to protein ratios and at different pH values, as well as inactivation by N-ethylmaleimide, show that the currents are due specifically to the activity of LacY. From analysis of the currents under different conditions and comparison with biochemical data, it is apparent that the predominant electrogenic event in downhill sugar/H+ symport is H+ release. In contrast, LacY mutants E325A and C154G, which bind ligand normally but are severely defective with respect to lactose/H+ symport, exhibit a minor electrogenic event upon addition of LacY-specific substrates, representing only 6% of the total charge displacement of the wild-type. This activity is due either to substrate binding per se or to a conformational transition following substrate binding. We propose that turnover of LacY involves at least two electrogenic reactions: (i) a minor reaction that occurs upon sugar binding and is due to a conformational transition in LacY; and (ii) a major reaction due to cytoplasmic release of H+ during downhill sugar/H+ symport, which is the limiting step for this mode of transport.
The transporter associated with antigen processing-like (TAPL) acts as a lysosomal ATP-dependent polypeptide transporter with broad length selectivity. To characterize in detail its substrate specificity, a procedure for solubilization, purification and functional reconstitution of human TAPL was developed. TAPL was expressed in Sf9 insect cells with the baculovirus expression system and solubilized from crude membranes. By intensive screening of detergents, the mild non-ionic detergents digitonin and dodecylmaltoside were found to be ideal for solubilization with respect to efficiency, long term stability, and functionality of TAPL. TAPL was isolated in a two-step procedure with a yield of 500 micro g/L cell culture and, subsequently, reconstituted into proteoliposomes. The KM(pep) for the peptide RRYCfKSTEL (f refers to fluorescence label) and KM(ATP) were determined to be 10.5 ± 2.3 micro M and 97.6 ± 27.5 micro M, respectively, which are in the same range as the Michaelis-Menten constants determined in the membranes. The peptide transport activity of the reconstituted TAPL strongly depends on the lipid composition. Interestingly, the E. coli lipids are prefered over other tested natural lipids extracts. Moreover, phosphatidylcholine, the most abundant phospholipid in eukaryotic cells influenced TAPL activity in a dose dependent manner. In addition, some negatively charged lipids like DOPA and DOPS increased peptide transport activity with preference for DOPS. However, DOPE or egg PG which are also negatively charged had no effect. It seems not only the charge but also the specific head group of phospholipids that has impact on the function of TAPL. With the help of combinatorial peptide libraries containing D-amino acid residues at defined positions as well as bulky fluorescein labeled peptides, the key positions of the peptides were localized to the N- and C-terminal residues with respect to peptide transport. The C-terminal position has the strongest selectivity since modification at this position shows strongest impact on peptide transport. Additionally, positions 2 and 3 of the peptide also have weak influence on peptide selectivity. Subsequently, the residue preferences at the key positions were systematically investigated by combinatorial peptide libraries with defined residues at certain positions. At both ends, TAPL favors positively charged, aromatic, or hydrophobic residues and disfavors negatively charged residues as well as asparagine and methionine. The residue preferences at the key positions are valid for peptide substrates with different length, indicating a general rule for TAPL selectivity. Besides specific interactions of both terminal residues, electrostatic interactions are important, since peptides with positive net charge are more efficiently transported than negatively charged ones. By size exclusion chromatography (SEC) and blue native PAGE, TAPL purified in the presence of digitonin or dodecylmaltoside had an apparent molecular weight of 200 kDa which is close to the theoretical molecular mass of the TAPL homodimer (172 kDa). The purified and reconstituted TAPL showed specific ATP hydrolysis activity which can be inhibited by orthovanadate. TAPL in proteoliposomes showed 6-fold higher ATP hydrolysis than digitonin solubilized protein, indicating the phospholipids impact on TAPL function. However, no peptide substrate stimulated ATPase activity was observed. For site-specific labeling of TAPL, eight cysteines in each half transporter were replaced by alanine or valine. The TAPL cys-less mutant showed the same peptide transport activity as TAPL wt. Based on the functional TAPL cys-less mutant, seven single cysteine mutants were introduced into strategic positions. All single cysteine mutants in the TMD did not influence peptide transport, whereas the mutant L701C, which is close to the conserved H-loop motif, displayed impaired transport. TAPL orthologs Haf-4 and Haf-9 from Caenorhabditis elegans possess around 40% sequence identities with TAPL and 50% with each other. Both proteins are putative half transporters and reported to be involved in the intestinal granule formation (Bauer, 2006; Kawai et al., 2009). To further understand the physiological functions of these two proteins, they were expressed in Sf9 insect cells. Haf-4 and Haf-9 showed weak but specific ATP- and peptide-dependent peptide transport activity for the given peptide RRYCfKSTEL. Therefore, it was proposed that the physiological roles for Haf-4 and Haf-9 might be related to their peptide transport activity. Besides forming functional homodimeric complex as estimated by the peptide transport activities, both half transporter could also form heteromers which was confirmed by coimmunoprecipitation. However, the heteromers showed decreased transport activity.
This thesis presents a 5.9 Å map of yeast FAS obtained by cryo-electron microscopy using single particle analysis (SPA). The EM-map has been analyzed both by quantitative and qualitative analysis to aid in understanding of the structure and dynamics of yeast FAS. This study approaches the factors limiting the resolution in EM (>20 Å) and further discusses the possibilities of achieving higher-resolutions (<10 Å) in cryo-EM by single particle analysis. Here, SPA is highlighted as a powerful tool for understanding the structure and dynamics of macro-molecular complexes at near native conditions. Though SPA has been used over the last four decades, the low-resolution range (20-30 Å) of the method has limited its use in structural biology. Over the last decade, sub nanometer resolution (<10 Å) structures solved by SPA have been reported --both in studies involving symmetric particles, such as GroEL (D7) and asymmetric particles, such as ribosomes (C1). Recently, near-atomic resolution in the range of 3.8-4.2 Å has been achieved in cases of highly symmetric icosahedral viral capsid structures as well. The yeast FAS structure (D3) presented here is one of two low symmetry structures submitted to the EM-database in a resolution range of 5-6 Å; the other being GroEL (D7). Fatty acid synthase (FAS) is the key enzyme for the biosynthesis of fatty acids in living organisms. There are two types of FAS, namely the type II FAS system in prokaryotes, consisting of a set of individual enzymes, and type I FAS found in eukaryotes as a multienzyme complex. Yeast fatty acid synthase (FAS) is a 2.6 MDa barrel-shaped multienzyme complex, which carries out cyclic synthesis of fatty acids. By electron cryomicroscopy of single particles we obtained a 3D map of yeast FAS at 5.9 Å resolution. Compared to the crystal structures of fungal FAS, the EM map reveals major differences and new features that indicate a considerably different arrangement of the complex in solution, as well as a high degree of variance inside the barrel. Distinct density regions in the reaction chambers next to each of the catalytic domains fit well with the substratebinding acyl carrier protein (ACP) domain. In each case, this resulted in the expected distance of ~18 Å from the ACP substrate binding site to the active site of the catalytic domains. The multiple, partially occupied positions of the ACP within the reaction chamber provide direct insight into the proposed substrate-shuttling mechanism of fatty acid synthesis in this large cellular machine.