Doctoral Thesis
Refine
Year of publication
- 2011 (26) (remove)
Document Type
- Doctoral Thesis (26) (remove)
Has Fulltext
- yes (26)
Is part of the Bibliography
- no (26)
Keywords
- Chaostheorie (1)
- Dipol-Dipol-Wechselwirkung (1)
- Dissertation (1)
- Dünnschichttransistor (1)
- Feldeffekt (1)
- Feldeffekttransistor (1)
- Field-effect (1)
- Heavy Ion Physics (1)
- Heisenberg modell (1)
- Heisenberg-Modell (1)
Institute
- Physik (26) (remove)
Epileptische Anfälle, unabhängig von ihrer Art und Auftrittshäufigkeit, bilden eine Symptomatik, welche bei ca. 1% der Weltbevölkerung auftritt. Hierbei kann es beispielsweise zu unkontrollierten Muskelkrämpfen kommen, ebenso aber zu einer Vielzahl anderer Symptome, die in ihrer Gesamtheit das Krankheitsbild der sogenannten Epileptogenesis bilden. Bei etwa zwei Drittel der an Epilepsie leidenden Patienten kann in vielen Fällen Anfallsfreiheit im Rahmen einer medikamentösen Therapie erreicht werden. Dies umso besser, wenn die Medikation präventiv zum geeigneten Zeitpunkt erfolgen könnte. Demzufolge würden in einer großen Anzahl von Fällen Patienten von einem System profitieren, das eine automatisierte zuverlässige Anfallsvorhersage ermöglicht. Bei nur 20% der anderen Patienten kann eine chirurgische Behandlung erfolgreich sein.
In dieser Arbeit soll eine weitergehende Untersuchung des im Institut für Angewandte Physik der Johann Wolfgang Goethe- Universität entwickelten Prädiktionsverfahrens an verschiedenen EEG-Registrierungen unterschiedlicher Patienten erfolgen. Dabei soll im speziellen untersucht werden, ob basierend auf den Resultaten einer Signalprädiktion eine Unterscheidung zwischen Voranfallszeitraum, Anfall und anfallsfreier Phase getroffen werden kann, und ob basierend auf den Kenngrößen eines Prädiktors und des Prädiktionsfehlers eine Merkmalsdefinition gefunden werden kann, welche in einem späteren, implantierbaren Frühwarnsystem eine automatisierte Anfallsvorhersage ermöglicht. Als Datenbasis sollen vier Langzeit-EEG-Registrierungen mit einer Länge von jeweils 5 – 10 Tagen zugrunde gelegt werden. Zur Prädiktion sollen zeitdiskrete, gedächtnisbehaftete, mehrschichtige Zellulare Nichtlineare Netzwerke herangezogen werden. Dabei soll insbesondere anhand von unterschiedlichen Netzwerken festgestellt werden, inwieweit mittels einer Signalprädiktion Synchronisationseffekte zwischen EEG-Signalen verschiedener Hirnareale festgestellt werden können.
Organische Materialien haben bis zur Mitte des 20. Jahrhunderts hinsichtlich ihrer elektronischen Eigenschaften keine besondere Aufmerksamkeit auf sich gezogen. Größeres Interesse an diesen Materialien entstand erst durch die Entdeckung einer ungewöhnlich hohen elektrischen Leitfähigkeit des organischen Perylen-Bromin Ladungstransfer-Komplexes durch Inokuchi et al. im Jahr 1954. Diese neue Klasse von Materialien besteht typischerweise aus Donor- und Akzeptor-Molekülen, die in einer bestimmten Stöchiometrie aneinander gebunden sind. Elektrische Ladung wird zwischen den Donor- und Akzeptor-Molekülen transferiert. Um diesen Prozess zu beschreiben, entwickelte Robert Mulliken in den 60er Jahren ein theoretisches Gerüst. Abhängig von der Anordnung der Moleküle und transferierten elektrischen Ladung kann der Ladungstransfer-Komplex (oder Salz) ein Isolator, ein Halbleiter, ein Metall oder sogar ein Supraleiter sein. Noch mehr Aufmerksamkeit erhielten Ladungstransfer-Materialien mit der Entdeckung des ersten quasi-eindimensionalen organischen Metalls TTF-TCNQ (tetrathiafulvalene-tetracyanoquinodimethane) im Jahr 1973. ...
Towards a THz Bloch laser
(2011)
The realisation of tunable THz laser sources working at room temperature would give
rise to further applications in this range of the electromagnetic spectrum. The THz
Bloch laser could therefore become the basis for a technological breakthrough. Beside
this practical relevance, the physics of the gain mechanism has been investigated
theoretically for a long time and the experimental implementation of a self-starting
laser still has not been achieved.
At the beginning of this thesis the basic principles of Bloch oscillations and the
related Bloch gain are described. The need of a superlattice structure to make Bloch
oscillations possible in a semiconductor material is discussed. In this context, the effect
of negative differential resistance and its influence on the field distribution due to Gunn
domains is explained. The latter lead to an inhomogeneous field which may suppress
the Bloch gain mechanism. The Krömer criterion is introduced and the concept of
field-pinning layers to improve the field homogeneity is deduced. Finally, the design of
the laser material is shown and different types of laser waveguides are compared.
In chapter 3 detailed recipes for the processing of samples are given. Different types of
contacts (ohmic and Schottky), the wafer bonding process required for double-metal
lasers and the application of different photoresists for different purposes are described.
An explanation of the formation of waveguides due to dry etching, wet etching
and ion implantation follows. Dry etching is an established technique in the field
of microstructure processing but the challenge of etching about 20 μm has led to
problems. The high etching depth also makes wet etching difficult but this method
could be improved due to a hard bake of the photoresist. The protection of critical
areas on the surface of the samples with photoresist during ion implantation was
increased by optimising the spin coating process. However, a full implantation of the
active layer between the waveguides was not achieved which was the reason for the
development of the hybrid technology. Here a prior wet etching of about 10 μm is
performed and the rest of the material is implanted.
The experimental setup is shown in chapter 4. An alternative method for the electrical
contacting with the help of a copper bar is introduced. This improves the current
distribution and the risk of an electrical breakdown during the measurements could
therefore be lowered. Devices for THz beam guidance and spectroscopic measurements
are shown and the method of biasing the samples with pulses below 100 ns and
determining the effective voltage applied to the sample is depicted. These short pulses
are required to prevent the samples heating up drastically due to high power.
Chapter 5 contains the current-voltage characterisation of several structures including
I-V-samples, Bloch laser samples and a quantum cascade laser. Different contacts
(ohmic and Schottky) and different techniques for the formation of the ridges have
been used in the processing of these samples (performed at the University of Frankfurt
in all cases) and their influence on the I-V-dependence is discussed. The properties of
the THz emission of the quantum cascade laser are in good agreement with published
results from lasers processed with the same material. Another important result of
this chapter is that the Bloch laser samples show unstable behaviour compared to the
quantum cascade structure even with short pulses (of about 10 ns) where the risk of an
electrical breakdown or the building of filaments is low. THz radiation emitted from
one of the Bloch laser samples could not be observed.
Two aspects that may have prevented the Bloch laser to emit are discussed in
chapter 6. The saturation of the gain for higher amplitudes of the THz wave is
investigated in single mode and multiple mode operation (the latter could occur due
to the Bloch gain being expected to be broadband). In both cases it is shown that
the saturation effect would limit the output power only to values clearly above the
detection limit. In the subsequent section the distribution of the electric field is
simulated with SILVACO software. Structures with transit layer lengths above the
Krömer criterion are compared with structures which include field-pinning layers. It is
shown that the latter are useful to avoid propagating Gunn domains as they build up
in similar structures without field-pinning layers. Nevertheless, the electric field inside
the superlattice regions is not stable. Beside spatial inhomogeneities also temporal
variations of the field magnitude are observed. The lack of a suitable field distribution
is expected to be the main reason for the samples not to work.
Subject of this thesis is the non-perturbative investigation of the thermal transition in Quantum Chromodynamics by means of lattice gauge theory and a particular type of lattice fermions, the so-called twisted mass fermions. These fermions offer the possibility of improvement as compared to the standard Wilson-type formulation. We investigate the properties of these fermions at finite temperature, i.e. the structure of the bare parameter space as well as leading order cutoff effects in the weak coupling limit. Then we focus on two-flavour simulations at finite pion mass. We identify the (pseudo-)critical temperatures for our set of pion masses (300 to 500 MeV) and discuss the extrapolation to the chiral limit for which the nature of the transition is still an open question. Besides pseudo-critical temperatures we consider the magnetic equation of state and screening observables. We find that the assumption of a second order transition (in the 3d O(4) universality class) agrees with our data without being able to exclude alternatives. Finally, we discuss the future inclusion of strange and charm quarks in dynamical twisted mass simulations and look at the corresponding cutoff effects in the free limit.
The study of meson production in proton-proton collisions in the energy range
up to one GeV above the production threshold provides valuable information about
the nature of the nucleon-nucleon interaction. Theoretical models describe the interaction
between nucleons via the exchange of mesons. In such models, different
mechanisms contribute to the production of the mesons in nucleon-nucleon collisions.
The measurement of total and differential production cross sections provide information
which can help in determining the magnitude of the various mechanisms.
Moreover, such cross section information serves as an input to the transport calculations
which describe e.g. the production of e+e− pairs in proton- and pion-induced
reactions as well as in heavy ion collisions.
In this thesis, the production of ω and η mesons in proton-proton collisions at 3.5
GeV beam energy was studied using the High Acceptance DiElectron Spectrometer
(HADES) installed at the Schwerionensynchrotron (SIS 18) at the Helmholtzzenturm
f¨ur Schwerionenforschung in Darmstadt.
About 80 000 ω mesons and 35 000 η mesons were reconstructed. Total production
cross sections of both mesons were determined. Furthermore, the collected statistics
allowed for extracting angular distributions of both mesons as well as performing
Dalitz plot studies.
The ω and η mesons were reconstructed via their decay into three pions (π+π−π0)
in the exclusive reaction pp −→ ppπ+π−π0. The charged particles were identified
via their characteristic energy loss, via the measurement of their time of flight and
momentum, or using kinematics.
The neutral pion was reconstructed using the missing mass method. A kinematic
fit was applied to improve the resolution and to select events in which a π0 was
produced.
The correction of measured yields for the effects of spectrometer acceptance was done
as a function of four variables (two invariant masses and two angles). Systematic
studies of the acceptance for different input distributions were performed.
The measured yields were normalized to the number of measured events of elastic
scattering. Systematic errors due to the methods of the data analysis and the
background subtraction were investigated.
Production angular distributions of ω and η mesons were measured. Both mesons
exhibit a slightly anisotropic angular distribution.
The Dalitz plot of ω meson production shows indications of resonant production.
However, the deviation of the distribution from the one expected by phase space
simulations is not large.
The Dalitz plot of η meson production shows a signal of the production via the
N(1535) resonance, The contribution of N(1535) to the production was quantified
to be about 47%. The angular distribution of η mesons does not show significant
differences between resonant and non resonant production.
The total production cross section of ω mesons in the reaction pp −→ ppω was
determined to be 106.5 ± 0.9 (stat) ± 7.9 (sys) [μb] where stat indicates statistical
error and sys indicates systematic error, while that of η mesons was determined to
be 136.9 ± 0.9 (stat) ± 10.1 (sys) [μb] in the reaction pp −→ ppη
The phenomenon of magnetism is a pure quantum effect and has been studied since the beginning of civilization. The practical use of magnetic materials for technical purposes was well established in the 19th century; still nowadays there is no lack of new high-tech applications based on magnetism for example in information technology to store and process data. This thesis does not focus on the development of new applications of magnetism in technology, nor enhancement of known fields of application. Instead, the intention is to use a quantum theory of magnetism for obtaining new insights on physical effects that accompany the phenomenon of magnetism. Therefore three different model systems, each of which are believed to describe a class of real compounds, are considered. Starting from the idea that magnetism can be understood by use of the so-called Heisenberg model that microscopically characterizes the interaction between localized magnetic moments, we restrict ourselves to the case where a long-range magnetic order is present. In order to deduce consequences resulting from this microscopic picture we use the spin-wave theory that is introduced in the first chapter. Central objects of this theory are the magnons which are elementary quantum excitations in ordered magnets. An application of these mathematical techniques to a model that describes an antiferromagnet in an external magnetic field is presented in the second chapter. Quantities like the spin-wave velocity and the damping of magnons are calculated using a Hermitian operator approach in the framework of spin-wave theory. A strong renormalization of the magnetic excitations arises because the symmetry of the system is reduced due to the external magnetic field. In the second model system, that describes thin films of a ferromagnet, concepts of classical physics meet quantum physics: The magnetic dipole-dipole interaction that is also known in everyday life from the magnetic forces between magnets and was initially formulated in the theory of electromagnetism, is included in the microscopic model. Having a special compound in mind where the magnetic excitations are directly accessible in experiments, the energy dispersions of magnon modes in thin-film ferromagnets are deduced. Our approach is essentially a basis for further investigations beyond this thesis to describe strong correlations and condensation of magnons. A recent realization of data processing devices with spin waves puts the understanding of physical processes in these ferromagnetic films in the focus of upcoming research. The third model system brings in the so-called frustration where the interactions between the spins are such that the total energy cannot be minimized by an appropriate alignment of the magnetic moments in the classical picture. In the simplest case this appears because the antiferromagnetically coupled spins are located on a triangular lattice. This situation will lead to strong quantum fluctuations which make this model system interesting. Finally the overall symmetry is reduced by inclusion of spin anisotropies and an external magnetic field. Instead of focusing on the properties of the magnetic excitations, the effect of the magnetic field on the properties of the lattice vibrations is subject to the investigation. This is interesting because the characteristics of lattice vibrations can be measured experimentally using the supersonic technique.
This thesis deals with the simulation, optimization and realization of quasi-optical scanning systems for active THz cameras. Active THz cameras are sensitive in the THz regime of the electromagnetic spectrum and are suitable for the detection of metal objects such as weapons behind clothing or fabrics (maybe for security applications) or material investigation. An advantage of active THz-systems is the possibility to measure the phase of the THz-radiation and thus to reconstruct the surface topography of the objects under test. Due to the coherent illumination and the required system parameters (like image field size, working distance and lateral resolution) the optical systems (in the THz region often called quasi-optical systems) must be optimized. Specifically, the active illumination systems require highly optimized quasioptical systems to achieve a good image quality. Since currently no suitable multi-pixel detectors are available, the object has to be scanned in one or two dimensions in order to cover a full field of view. This further reinforces the occurring aberrations. The dissertation covers, alongside the underlying theory, the simulation, optimisation and realisation of three different active THz systems. The subdivision of the chapters is as follows: Chapter 1 deals with a motivation. Chapter 2 develops the underlying theory and it is demonstrated that the geometrical optics is an adequate and powerful description of the image field optimization. It also addresses the developed analytic on-axis and the off-axis image field optimization routine. Chapter 3, 4 and 5 are about the basis of various active THz cameras, each presented a major system aspect. Chapter 3 shows how active THz-cameras with very high system dynamics range can be realised. Within this chapter it could although be demonstrated how very high depth resolution can be achieved due to the coherent and active illumination and how high refresh rate can be implemented. Chapter 4 shows how absolute distance data of the objects under test can be obtained. Therefore it is possible to reconstruct the entire object topography up to a fraction of the wavelength. Chapter 5 shows how off-axis quasi-optical systems must be optimized. It is also shown how the illumination geometry of the active THz systems must be changed to allow for real-time frame rates. The developed widened multi-directional lighting approach also fixes the still existing problem of phase ambiguity of the single phase measurement. Within this chapter, the world’s first active real-time camera with very high frame rates around 10 Hz is presented. This could be only realized with the highly optimised quasioptical system and the multi-directional lighting approach. The paper concludes with a summary and an outlook for future work. Within the outlook some results regarding the simulation of synthetic aperture radar systems and metamaterials are shown.
This thesis has light mesons and their vacuum interactions as its topic. In particular, the work examines the question where the scalar antiquark-quark states are found in the physical spectrum -- in the energy region below or above 1 GeV. Contrary to the naive expectation, the mentioned states are found in the region above 1 GeV. This has consequences for the building of order parameters for the chiral symmetry breaking of Quantum Chromodynamics (QCD).
Das Antiprotonen-Experiment PANDA an der zukünftigen Beschleunigeranlage FAIR wird unter anderem Charmonium-Zustände mit einer bis dato unerreichten Genauigkeit messen können. Um dieses Ziel zu erreichen, wird eine sehr gute Teilchenidentifikationsfähigkeit verlangt. Eine gute Trennung zwischen Pionen und Kaonen wird durch den Einsatz eines Cherenkovdetektors erreicht. Die Leistungsfähigkeit eines DIRC hängt von dessen Radiatorgüte ab. Um die Qualität der Radiatorstäbe spezifizieren zu können, wurde im Rahmen dieser Doktorarbeit eine optische Messapparatur entwickelt. Dieser Aufbau erlaubt es die Transmission sowie die Oberflächenrauheit der Stäbe zu messen. Es wurden mehrere Radiatorstäbe aus synthetischem Quarzglas und Acrylglas untersucht. Die Messgenauigkeit bei hochqualitativen Stäben liegt für die Transmissionsmessung bei etwa 1 Promille und für die Rauheit bei 1-2 Angström. Die Messergebnisse bei verschiedenen Wellenlängen zeigen eine gute Übereinstimmung mit der skalaren Streutheorie, die den Zusammenhang zwischen Reflexionskoeffizienten und Rauheit beschreibt. Bei einer Strahlzeit an der GSI mit einem 2 GeV Protonenstrahl wurde ein erster Prototyp für den Barrel-DIRC mit einem Stab aus synthetischem Quarzglas als Radiator getestet. Durch Variation des Einfallswinkels und der Position des Protonenstrahls auf dem Radiator konnten Cherenkovringe eindeutig nachgewiesen werden. Zudem wurde der Cherenkovwinkel und die Einzelphotonauflösung in guter Übereinstimmung mit dem Erwartetem und der Simulation bestimmt.
This work deals with the use of dielectrics with high permeability, so-called high-k dielectrics in organic thin-film field-effect transistors (FETs). The central part was the preparation of the high-k dielectric and its implementation in transistors, in which organic semiconductors were used as active layer. A field-effect transistor can be used to measure the charge carrier mobility. Employing high-k dielectrics the carrier concentration in the active layer can be greatly increased. In this way, high charge carrier concentrations in organic layers can be achieved without chemical doping. As high-k dielectric strontium titanate (STO) was selected. It is also available as a niobium-doped and therefore conducting substrate material. Thus, one has an ideal substrate for the growth of the dielectric layer in conjunction with a substrate which acts as gate electrode. As the organic semiconductor the small molecules pentacene and copper phthalocyanine (CuPc) were sublimated, as electrical contacts gold was used. As a key part of this work an ultra high vacuum chamber system was constructed for in situ preparation of field effect transistors. For the deposition of the organic thin films a molecular beam deposition chamber was built, including a manipulator and effusion cells as evaporation sources. For the preparation of the dielectric a sputtering chamber was set-up. Another chamber was used in conjunction with an effusion cell for the deposition of the gold contacts. For the structured deposition of the different layers in the devices a shadow mask system was implemented. Movable masks could be positioned by means of a wobble stick onto the sample carriers. The system thus allowed for the use of masks in all chambers. The different thin films required in the transistor structure were first individually prepared and characterized. For the characterization primarily X-ray diffraction and optical microscopy were used. The growth of pentacene was analyzed on aplha-AlO substrates. With X-ray diffraction the (00l) reflections of the thin film phase were observed. In growth studies of CuPc aplha-AlO and STO substrates were used. With X-ray diffraction the aplha-phase was detected. With increasing substrate temperature an increase in crystallinity, but also an increase in surface roughness was observed. The sputtering of STO as a high-k dielectric was studied and optimized. Simultaneously, a high deposition rate, a smooth film surface and good crystallinity of the layer were required. As the most important parameters the substrate temperature, pressure and sputtering power were identified. Argon and oxygen were employed as sputtering gases, as substrate MgO was used. The films showed in comparison to crystalline STO a distortion to larger lattice constants. The degree of distortion decreased with increasing chamber pressure, on the other hand, deposition rate decreased with increasing chamber pressure as well. By combining the individual deposition processes FETs in bottom-gate geometry were prepared. The first step was always sputtering of the STO dielectric on niobium-doped STO substrates. Subsequently, the electrodes and the organic layer were deposited. For comparison transistors on silicon substrates with silicon dioxide (SiO2) as the dielectric were prepared. To study the transistor properties a measurement setup was build. A dielectric constant of about 190 for the STO in the transistors was achieved. The transistors with CuPc as active layer showed p-type conduction behavior. The transistors with STO as dielectric had a much stronger response than those with SiO2. They reached mobilities of 2E-4 cm2/Vs at very low applied voltages of 3V. It could thus be demonstrated that STO is suitable as a dielectric for organic FETs, and that through the use of high-k dielectrics high charge carrier densities can be achieved.
Nonequilibrium phase transitions in chiral fluid dynamics including dissipation and fluctuation
(2011)
Chiral fluid dynamics combines the fluid dynamic expansion of a hot and dense plasma created in a heavy-ion collision with the explicit propagation of fluctuations at the chiral phase transition of quantum chromodynamics. From systems in equilibrium long-range fluctuations are expected at a conjectured critical point. Heavy-ion collisions are, however, finite in size and time and very dynamic. It is thus likely that nonequilibrium effects diminish the signal of a critical point. They can, however, stimulate phenomena at a first order phase transitions, like nucleation and spinodal decomposition. Both of phase transition scenarios are investigated in this work. Based on the linear sigma model with constituent quarks a consistent quantum field theoretical approach using the two-particle irreducible effective action is developed to derive both, the local equilibrium properties of the expanding quark fluid and the damping and noise terms in the Langevin equation of the order parameter of the phase transition, the sigma field. Within this formalism it is possible to obtain a conserved energy-momentum tensor of the coupled system. It describes the energy dissipation from the sigma field to the heat bath during relaxation. Within this model we investigate nonequilibrium phenomena in a scenario with a critical point and a first order phase transition. We observe long relaxation times at the phase transition, phase coexistence at the first order phase transition and critical slowing down at the critical point. We find a substantial supercooling in a first order phase transition in our model and due to the energy-momentum exchange also reheating is present. While at the critical point the correlation length increases slightly we find an enhanced intensity of nonequilibrium fluctuations at the first order phase transition, which leads to an increased production of sigma mesons.
Nanotechnology is a rapidly developing branch of science, which is focused on the study of phenomena at the nanometer scale, in particular related to the possibilities of matter manipulation. One of the main goals of nanotechnology is the development of controlled, reproducible, and industrially transposable nanostructured materials.
The conventional technique of thin-film growth by deposition of atoms, small atomic clusters and molecules on surfaces is the general method, which is often used in nanotechnology for production of new materials. Recent experiments show, that patterns with different morphology can be formed in the course of nanoparticles deposition process on a surface. In this context, predicting of the final architecture of the growing materials is a fundamental problem worth studying.
Another factor, which plays an important role in industrial applications of new materials, is the question of post-growth stability of deposited structures. The understanding of the post-growth relaxation processes would give a possibility to estimate the lifetime of the deposited material depending on the conditions at which the material was fabricated. Controllable post-growth manipulations with the architecture of deposited structures opens new path for engineering of nanostructured materials.
The task of this thesis is to advance understanding mechanisms of formation and post-growth evolution of nanostructured materials fabricated by atomic clusters deposition on a surface. In order to achieve this goal the following main problems were addressed:
1. The properties of isolated clusters can significantly differ from those of analogous clusters occurring on a solid surface. The difference is caused by the interaction between the cluster and the solid. Therefore, the understanding of structural and dynamical properties of an atomic cluster on a surface is a topic of intense interest from the scientific and technological point of view. In the thesis, stability, energy, and geometry of an atomic cluster on a solid surface were studied using a liquid drop approach which takes into account the cluster-solid interaction. Geometries of the deposited clusters are compared with those of isolated clusters and the differences are discussed.
2. The formation scenarios of patterns on a surface in the course of the process of cluster deposition depend strongly on the dynamics of deposited clusters. Therefore, an important step towards predicting pattern morphology is to study dynamics of a single cluster on a surface. The process of cluster diffusion on a surface was modeled with the use of classical molecular dynamics technique, and the diffusion coefficients for the silver nanoclusters were obtained from the analysis of trajectories of the clusters. The dependence of the diffusion coefficient on the system’s temperature and cluster-surface interaction was established. The results of the calculations are compared with the available experimental results for the diffusion coefficient of silver clusters on graphite surface.
3. The methods of classical molecular dynamics cannot be used for modeling the self-assembly processes of atomic clusters on a surface, because these processes occur on the minutes timescale, what would require an unachievable computer resource for the simulation. Based on the results of molecular dynamics simulations for a single cluster on a surface a Monte-Carlo based approach has been developed to describe the dynamics of the self-assembly of nanoparticles on a surface. This method accounts for the free particle diffusion on a surface, aggregation into islands and detachment from these islands. The developed method is allowed to study pattern formation of structures up to thousands nm, as well as the stability of these structures. Developed method was implemented in MBN Explorer computer package.
4. The process of the pattern formation on a surface was modeled for several different scenarios. Based on the analysis of results of simulations was suggested a criterion, which can be used to distinguish between different patterns formed on a surface, for example: between fractals or compact islands.This criteria can be used to predict the final morphology of a growing structure.
5. The post-growth evolution of patterns on a surface was also analyzed. In particular, attention in the thesis is payed to a systematical theoretical analysis of the post-growth processes occurring in nanofractals on a surface. The time evolution of fractal morphology in the course of the post-growth relaxation was analyzed, the results of these calculations were compared with experimental data available for the post-growth relaxation of silver cluster fractals on graphite substrate.
All the aforementioned problems are discussed in details in the thesis.
In der vorliegenden Arbeit wird die Ionisation von Stickstoff- und Sauerstoff-Molekülen in starken, nicht-resonanten Laserlicht-Pulsen untersucht. Die dreidimensionalen Impulsvektoren der freigesetzten Elektronen und Ionen wurden mittels eines sogenannten COLTRIMS Spektrometers vermessen. Das Hauptaugenmerk galt dem Kanal der Einfachionisation, der ein stabiles Molekülion ($N_2^+$ / $O_2^+$) erzeugt. Da in diesem Fall keine Dissoziation des Ions stattfindet, kann nicht aus der Flugrichtung ionischer Fragmente auf die Ausrichtung der Molekülachse geschlossen werden. Die Abhängigkeit des Prozesses vom Winkel zwischen der Molekülachse und der Polarisationsrichtung des ionisierenden Lichtes ist nur dann zugänglich, wenn die Ausrichtung der Molekülachsen vordem Zeitpunkt der Ionisation aktiv kontrolliert werden kann. Hierzu wurde die Technik der nichtadiabatischen Molekülausrichtung'' (non-adiabatic molecular alignment'') [1] angewandt. Ein erster, mäßig intensiver Lichtpuls bewirkte die Ausrichtung der Molekülachsen im Laborsystem. Sodann wurden die ausgerichteten Moleküle von einem zweiten, hochintensiven Puls ionisiert. In einem ersten Experiment wurden Elektronen-Impulsverteilungen für zwei verschiedene Molekülausrichtungen bestimmt. Ein Vergleich der Verteilungen brachte zwei wichtige Ergebnisse: 1) Im Bereich niedriger Elektronen-Impulse senkrecht zur Polarisationsrichtung des ionisierenden Lichtpulses wird der Fingerabdruck'' des ionisierten Molekülorbitals sichtbar. 2) Bei höheren Impulsen zeigten sich Strukturen, die als Doppelspalt-Interferenz interpretiert werden können. Ein ionisiertes Elektron propagiert im oszillierenden elektrischen Feld des Laser-Pulses. Von diesem kann es auf das Ion hin zurück beschleunigt werden und dort streuen [2]. Wir betrachten den Fall elastischer Rückstreuung''. In erster Näherung wirken die Bestandteile des diatomaren Molekülions wie ein Doppelspalt, an dem die streuende Elektronen-Welle gebeugt wird. In einem zweiten, dem ersten sehr ähnlichen Experiment wurde die Molekülausrichtungs-Richtung in kleinen Schritten variiert. Sowohl der Effekt der Elektronenbeugung am Ion, als auch - mit Einschränkungen - die Abbildung des ionisierten Orbitals wurde erneut beobachtet. Letztere ist durch eine Projektion des Orbitals in den Impulsraum senkrecht zur Laser-Polarisationsrichtung bestimmt [3,4]. Die Messung der Strukturen unter verschiedenen Molekül-Ausrichtungen im zweiten Experiment entspricht daher der Aufnahme verschiedener Projektionen des Orbitals. Der so gewonnene Datensatz sollte prinzipiell eine Rekonstruktion der dreidimensionalen Elektronen-Dichteverteilung des ionisierten Molekülorbitals mittels eines Tomographie-Algorithmus ermöglichen. Entsprechende Entwicklungen sind bei Kooperationspartnern im Gange. Die beobachtete Beugung des rückgestreuten Elektrons ermöglicht den Rückschluss auf die Positionen der Kerne im Molekülion. Es besteht die Hoffnung, dass sich in Zukunft detailliertere Informationen über das streuende Potential jenseits des einfachen Doppelspalt-Modells gewinnen lassen. Rückstreuung höherenergetischer Elektronen sollte hingegen eine verbesserte Ortsauflösung ermöglichen. Beide Informationen - Ionisiertes Orbital und Beugungsbild des Ions - werden simultan in ein- und derselben Messung gewonnen. Die zeitliche Auflösung wird durch rein optische Parameter (Licht-Wellenlänge, Pulslänge) determiniert. Sie kann mittels ultrakurzer, phasenstabiler Laserlicht-Pulse in den Bereich einer Femtosekunde oder darunter verbessert werden. [1] Stapelfeldt et al., Rev. Mod. Phys. 75, 543-557 (2003). doi:10.1103/RevModPhys.75.543 [2] Corkum, Phys. Rev. Lett. 71, 1994-1997 (1993). doi:10.1103/PhysRevLett.71.1994 [3] Spanner et al., J. Phys. B 37, L243-L250 (2004). doi:10.1088/0953-4075/37/12/L02 [4] Ivanov et al., J. Mod. Opt. 52, 165 (2005). doi:10.1080/0950034042000275360
Ziel der durchgeführten Experimente dieser Arbeit war es, den Versuch zu unternehmen, Cooper-Paare als Träger des supraleitenden Stroms direkt mit Hilfe des Photoelektrischen Effektes nachzuweisen. Die Methode der koinzidenten Photoelektronenspektroskopie zielt dabei auf den Nachweis von zwei kohärent emittierten Elektronen durch die Wechselwirkung mit einem Photon ab. Da elektrostatische Analysatoren typischerweise nur einen sehr kleinen Raumwinkel erfassen, was mit sehr geringen Koinzidenzraten einhergeht, ist im Zusammenhang mit dieser Arbeit ein Flugzeitprojektionssystem entwickelt worden, welches nahezu den gesamten Raumwinkel auf einem ortsauflösenden Detektor abbildet. Die zur Messung erforderliche gepulste Lichtquelle in Form von spezieller Synchrotronstrahlung ist so schwach eingestellt worden, daß nur vereinzelt Photonen auf die Probe gelangen konnten. Spektroskopiert wurde neben Testmessungen an Silberschichten sowohl ein Blei-Einkristall als Vertreter der klassischen BCS-Supraleiter als auch einkristallines Bi2Sr2CaCu2O8 aus der Gattung der Hochtemperatursupraleiter. Mit Anregungsenergien bis 40 eV konnte gezeigt werden, daß hinreichend glatte und saubere Oberflächen in der supraleitenden Phase innerhalb des Auflösevermögens von ungefähr 0.5 eV keine erkennbaren, signifikanten Unterschiede im Vergleich zur normalleitenden Phase aufweisen. Neben diesen Untersuchungen ist weiterhin ausführlich die einfache Photoemission an den verschiedenen Proben und insbesondere im Falle des Bleikristalls behandelt, da hier keine vergleichbaren Resultate bekannt sind. Dabei wird der gesamte Impulsraum besprochen und die Fermi-Fläche als dreidimensionales Modell erstellt, mit dessen Hilfe die Meßergebnisse diskutiert werden. In den theoretischen Beschreibungen sind verschiedene Modelle zur Cooper-Paar-Emission vorgestellt, wobei beispielsweise dem Impulsaustausch mit dem Kristall eine besondere Rolle beigemessen wird, da dieser bei direkten Anregungen nur über diskrete Gittervektoren erfolgen kann.
In the work presented herein the microscopic transport model BAMPS (Boltzmann Approach to Multi-Parton Scatterings) is applied to simulate the time evolution of the hot partonic medium that is created in Au+Au collisions at the Relativistic Heavy Ion Collider (RHIC) and in Pb+Pb collisions at the recently started Large Hadron Collider (LHC). The study is especially focused on the investigation of the nuclear modification factor R_{AA}, that quantifies the suppression of particle yields at large transverse momentum with respect to a scaled proton+proton reference, and the simultaneous description of the collective properties of the medium in terms of the elliptic flow v_{2} within a common framework.
In dieser Arbeit wurden Verfahren zur Identifikation hirnelektrischer Aktivität mit Zellularen Nichtlinearen Netzwerken (CNN), im Besonderen Reaktions-Diffusions-Netzwerken, entwickelt und untersucht. Mit Hilfe der eingeführten Methoden wurden Langzeitaufzeichnungen hirnelektrischer Aktivität bei Epilepsie analysiert und mittels eines automatisierten Verfahrens ermittelt, inwieweit sich mögliche Voranfallszustände vom anfallsfreien Zustand im statistischen Sinne trennen lassen.
Zunächst wurde ein Überblick über CNN gegeben und deren Beschreibung durch Systeme gekoppelter Differentialgleichungen dargestellt. Weiterhin wurden die Möglichkeiten der Informationsverarbeitung mit CNN durch Ausnutzung von Gleichgewichtszuständen oder der vollständigen raum-zeitlichen Dynamik der Netzwerke diskutiert. Zusätzlich wurde die Klasse der Reaktions-Diffusions-Netzwerke (RD-CNN) eingeführt. Für die Repräsentation der hierbei benötigten weitgehend allgemeinen nichtlinearen Zellkopplungsvorschriften wurden polynomiale Gewichtsfunktionen vorgeschlagen. Mit einer Darstellung der Theorie der Lokalen Aktivität wurden notwendige Bedingungen für emergentes Verhalten in RD-CNN angegeben. Die statistische Bewertung von Vorhersagemodellen wurde aus theoretischer Sicht beleuchtet. Mit der Receiver Operating Characteristic (ROC) wurde eine Analysemethode zur Beurteilung der Vorhersagekraft des zeitlichen Verlaufs von Kenngrößen bezüglich bevorstehender epileptischer Anfälle vorgestellt.
Als nächstes wurden Überlegungen zur numerischen Simulation von CNN und deren flexible und erweiterbare programmtechnische Umsetzung entwickelt. Die daraus resultierende und im Rahmen dieser Arbeit entstandene objektorientierte Simulationsumgebung FORCE++ wurde konzeptionell und im Hinblick auf die Softwarearchitektur vorgestellt.
Die Verfahren zur numerischen Simulation wurden auf die Problemstellung der Systemidentifikation mit CNN angewandt. Dazu wurden Netzwerke derart bestimmt, dass deren Zellausgangswerte entsprechende Signalwerte des beobachteten, zu identifizierenden Systems approximieren.
Da die Parameter der zu bestimmenden CNN im vorliegenden Fall der Untersuchung hirnelektrischer Aktivität nicht bekannt sind und nicht direkt abgeleitet werden können, wurden überwachte Lernverfahren zur Bestimmung der Netzwerke eingesetzt. Hierbei wurden Lernverfahren verschiedener Klassen für die Identifikation mit CNN mit polynomialen Gewichtsfunktionen untersucht. Die Leistungsfähigkeit des vorgestellten Identifikationsverfahrens wurde anhand bekannter Systeme einer genauen Betrachtung unterzogen. Dabei wurde festgestellt, dass die betrachteten Systeme mit hoher Genauigkeit durch CNN repräsentiert werden konnten. Exemplarisch wurde das Parametergebiet lokaler Aktivität für ein RD-CNN berechnet und durch numerische Simulationen die Ausbildung von Mustern innerhalb des Netzwerkes nachgewiesen.
Nach einem einleitenden Überblick über die medizinischen Hintergründe von Epilepsie und der Erfassung hirnelektrischer Aktivität wurde eine vergleichende Übersicht über den Stand veröffentlichter Studien zur Vorhersage epileptischer Anfälle gegeben. Für die Anwendung des hier vorgestellten Identifikationsverfahrens zur Analyse hirnelektrischer Aktivität wurde zunächst die Genauigkeit der Approximation kurzer, als quasi-stationär betrachteter Abschnitte, von EEG-Signalen untersucht. Durch gezielte Erhöhung der Komplexität herangezogener Netzwerke konnte hier die Genauigkeit der Repräsentation von EEG-Signalverläufen deutlich verbessert werden. Dabei wurde zudem die Verallgemeinerungsfähigkeit der ermittelten Netzwerke untersucht, wobei festgestellt wurde, dass auch solche Signalwerte mit guter Genauigkeit approximiert werden, die nicht im Identifikationsverfahren durch die überwachte Parameteroptimierung berücksichtigt waren. Um speziell den Einfluss der Information aus der Korrelation benachbarter Elektrodensignale zu untersuchen, wurde ein Verfahren zur multivariaten Prädiktion mit Discrete Time CNN (DT-CNN) entwickelt.
Hierbei werden durch ein CNN Signalwerte der betrachteten Elektrode aus vergangenen, korrelierten Signalwerten von Nachbarelektroden geschätzt. Für diese Aufgabenstellung konnte eine Methode zur Bestimmung der Netzwerkparameter im optimalen Sinn, alleine aus den statistischen Eigenschaften der Elektrodensignale angegeben werden. Dadurch gelang eine erhebliche Reduzierung der Rechenkomplexität, die eine umfangreiche Untersuchung intrakranieller Langzeitableitungen ermöglichte.
Zur Analyse von Langzeitaufzeichnungen mit dem RD-CNN Identifikationsverfahren, wurden die numerischen Berechnungen zur Simulation von CNN mit FORCE++ auf einem durchsatz-orientierten Hochleistungs-Rechnernetzwerk durchgeführt. Mit den so gewonnen Ergebnissen konnten vergleichende Analysen vorgenommen werden. Zudem wurden Untersuchungen zum Vorliegen lokaler Aktivität in den ermittelten RD-CNN durchgeführt.
Die bei den beschriebenen Verfahren extrahierten Kenngrößen hirnelektrischer Aktivität wurden durch ein automatisiertes Verfahren auf ihre Vorhersagekraft für epileptische Anfälle bewertet. Dabei wurde untersucht, inwieweit der anfallsfreie Zustand und ein angenommener Voranfallszustand durch die jeweils betrachtete Kenngröße im statistischen Sinn diskriminiert werden kann. Durch parallele Analysen mit Anfallszeitsurrogaten wurden hierzu ergänzende Signifikanztests durchgeführt.
Nach Auswertung von mehrtägigen Hirnstromsignalen verschiedener Patienten konnte festgestellt werden, dass mit den in dieser Arbeit entwickelten Verfahren Kenngrößen hirnelektrischer Aktivität bestimmt werden konnten, welche offenbar die Identifikation potentieller Voranfallszustände ermöglichen.
Auch wenn für eine breite medizinische Anwendung die Spezifität und Sensitivität noch weiter verbessert werden muss, so können doch die erzielten Ergebnisse einen wesentlichen Schritt hin zu einer implantierbaren, CNN-basierten Plattform zur Erkennung und Verhinderung epileptischer Anfälle darstellen. Die Berechnungen für das Identifikationsverfahren mit RD-CNN könnten dabei durch zukünftige, spezialisierte schaltungstechnische Realisierungen für mehrschichtige CNN mit polynomialen Gewichtsfunktionen eine erhebliche Beschleunigung erfahren.
Im Rahmen des Programms zur Intensitätserhöhung am Universal Linear Accelerator UNILAC für das Element Uran hat sich die Forderung nach einer Ionenquelle ergeben, die einen intensiven, hochbrillianten Ionenstrahl aus vierfach geladenen Uranionen bereitstellen kann. Ziel war es, im Zusammenspiel von Ionenquelle, Nachbeschleunigungssystem und Niederenergiestrahlführung einen Strahlstrom von mindestens 15 emA U4+ am Eingang des RFQ-Beschleunigers bereitzustellen. Die vorliegende Arbeit befaßt sich mit den Optimierungen und den experimentellen Untersuchungen an der Vakuumbogenionenquelle VARIS für den Uranbetrieb, welche schließlich ihre Leistungsfähigkeit an der Beschleunigeranlage der GSI erfolgreich unter Beweis gestellt hat. Der erste Teil dieser Arbeit widmet sich der Theorie der Vakuumbogenentladung unter besonderer Berücksichtigung der Erzeugung von U4+. Die Generierung von U4+ erfolgt dabei zu einem Teil im dichten Kathodenspotplasma, wo das Ionisationspotential von 31 auf 21 eV herabgesetzt ist, U4+ also bei vergleichsweise niedrigen Elektronenenergien erzeugt werden kann. Der U4+-Anteil beträgt jedoch nur 30 %. Die Erzeugung eines höheren Anteils an U4+ ist geknüpft an zusätzlich Ionisationsvorgänge im expandierenden Zwischenelektrodenplasma, für welches eine neuartige Theorie (MHD Ansatz) angegeben werden konnte. Für die Vakuumbogenentladung im axialen Magnetfeld konnte eine Erhöhung der Elektronentemperatur vorhersagt werden, die für eine höhere Ionisationsrate für U4+ verantwortlich ist. Für die Elektronentemperatur wurde bei einer magnetischen Flußdichte von 40 mT ein Wert von 10 eV vorhergesagt, welcher experimentell bestätigt werden konnte. Zieht man zudem die berechneten Wirkungsquerschnitte für die Ein- und Mehrfachionisation heran, so konnte aus den Wirkungsquerschnitten vorausgesagt werden, daß für die Produktion eines hohen Anteils an U4+ eine Elektronenenergie von zirka 50 eV für die Generierung von U4+ aus U3+ erforderlich ist. Im weiteren wurde ausgeführt, wie ein Extraktionssystem ausgelegt sein muß, welches den Forderungen nach einem Gesamtstrom von 140 mA entspricht oder diesen übertrifft. Das Erreichen dieses Stroms ist im Einlochextraktionssystem mit Schwierigkeiten verbunden (große Emissionsfläche, langes Extraktionssystem, Extraktionsspannung zirka 180 kV). Aus diesen Gründen ist die Entscheidung zugunsten eines Extraktionssystem mit 13 Öffnungen mit einem Durchmesser von jeweils 3 mm gefallen. Die Gesamtemissionsfläche aller Aperturen liegt bei 0,92 cm2. Zur Bestimmung der Strahlformierung einer Öffnung im Extraktionssystem ist das Strahlsimulationsprogramm KOBRA3INP unter Berücksichtigung einer experimentell gut zugänglichen Feldstärke von 11 kV/mm bei einem Aspektverhältnis von 0,5 genutzt worden. Es ergab sich ein minimaler Divergenzwinkel von etwa 55 mrad, die unnormierte effektive Emittanz geht mit steigender Stromdichte asymptotisch einem Wert von 65p mm mrad entgegen. Für das Extraktionssystem (13 Öffnungen) kann die unnormierte effektive Emittanz zu 610p mm mrad abgeschätzt werden. Die Stromdichte, welche der Plasmagenerator bereitstellen muß, beträgt etwa 1600 A/m2. Die Extraktionsspannung liegt bei 32 kV, welche, ebenso wie die Stromdichte, experimentell erreicht wurde. Bei den experimentellen Untersuchungen wurde zunächst untersucht, inwieweit die Impedanz des Vakuumbogenplasmas gesteigert werden kann. Ziel war es, eine möglichst hohe Plasmaimpedanz und damit eine hohe Bogenspannung zu erhalten, wodurch die erreichbare Elektronenenergie vergrößert wird (Regelung der Bogenspannung durch die Plasmaimpedanz). Es ist gezeigt worden, daß die Impedanz vor allem durch eine geeignete Magnetfeldkonfiguration erhöht werden kann (axiales Feld). Ebenso sind die Geometrie der Ionenquelle (Abstand Kathode-Anode 15 mm, Anodenöffnung 15 mm) und die verwendeten Materialien (Anode aus Edelstahl, kleiner Sputterkoeffizient und Sekundärelektronenaus97 löse) entscheidend, wobei zugunsten eines zuverlässigen Zündverhaltens der Ionenquelle die Entscheidung für eine Anodenöffnung von 15 mm statt 25 mm gefallen ist. So erreicht man für eine magnetische Flußdichte von 120 mT bei einem Bogenstrom von 700 A eine Bogenspannung von 54 V, wodurch die Erzeugung bis zu sechsfach geladenen Uranionen möglich wird. Um grundlegende Eigenschaften des Vakuumbogenplasmas zu bestimmen und das theoretische Modell zur Erzeugung von U4+ zu überprüfen, wurden die Ionen- und Elektronenenergieverteilung im Plasma gemessen ...
Dynamics of chaotic strings
(2011)
The main topic of this thesis is the investigation of dynamical properties of coupled Tchebycheff map networks. At every node of the network the dynamics is given by the iteration of a Tchebycheff map, which shows strongest possible chaotic behaviour. By applying a coupling between the various individual dynamics along the links of the network, a rich structure of complex dynamical patterns emerges. Accordingly, coupled chaotic map networks provide prototypical models for studying the interplay between local dynamics, network structure, and the emergent global dynamics. An exciting application of coupled Tchebycheff map lattices in quantum field theory has been proposed Beck in Spatio-temporal chaos and vacuum fluctuations of quantized fields' (2002). In this so-called chaotic string model, the coupled map lattice dynamics generates the noise needed for the Parisi-Wu approach of stochastic quantization. The remarkable obversation is that the respective dynamics seems to reproduce distinguished numerical values of coupling constants that coincide with those observed in the standard model of particle physic. The results of this thesis give insights into the chaotic string model and its network generalization from a dynamical point of view. This leads to a deeper understanding of the dynamics, which is essential for a critical discussion of possible physical embeddings. Apart from this specific application to particle physics, the investigated concepts like synchronization or a most random behaviour of the dynamics are of general interest for dynamical system theory and the science of complex networks. As a first approach, discrete symmetry transformations of the model are studied. These transformations are formulated in a general way in order to be also applicable to similar dynamics on bipartite network structures. An observable of main interest in the chaotic string model is the interaction energy. In Spatio-temporal chaos and vacuum fluctuations of quantized fields' (2002) it has been observed that certain chaotic string couplings, corresponding to a vanishing interaction energy, coincide with coupling constants of the standard model of elementary particle physics. Since the interaction energy is basically a spatial correlation measure, an interpretation of the respective dynamical states in terms of a most random behaviour is tempting. In order to distinguish certain states as most random', or evoke another dynamical principle, a deeper understanding of the dynamics essential. In the present thesis the dynamics is studied numerically via Lyapunov measures, spatial correlations, and ergodic properties. It is shown that the zeros of the interaction energy are distinguished only with respect to this specific observable, but not by a more general dynamical principle. The original chaotic string model is defined on a one-dimensional lattice (ring-network) as the underlying network topology. This thesis studies a modification of the model based on the introduction of tunable disorder. The effects of inhomogeneous coupling weights as well as small-world perturbations of the ring-network structure on the interaction energy are discussed. Synchronization properties of the chaotic string model and its network generalization are studied in later chapters of this thesis. The analysis is based on the master stability formalism, which relates the stability of the synchronized state to the spectral properties of the network. Apart from complete synchronization, where the dynamics at all nodes of the network coincide, also two-cluster synchronization on bipartite networks is studied. For both types of synchronization it is shown that depending on the type of coupling the synchronized dynamics can display chaotic as well as periodic or quasi-periodic behaviour. The semi-analytical calculations reveal that the respective synchronized states are often stable for a wide range of coupling values even for the ring-network, although the respective basins of attraction may inhabit only a small fraction of the phase space. To provide analytical results in closed form, for complete synchronization the stability of all fixed points and period-2 orbits of all chaotic string networks are determined analytically. The master stability formalism allows to treat the ring-network of the chaotic string model as a special case, but the results are valid for coupled Tchebycheff maps on arbitrary networks. For two-cluster synchronization on bipartite networks, selected fixed points and period-2 orbits are analyzed.
Design and optimization of the lattice of the superconducting synchrotron SIS300 for slow extraction
(2011)
The superconducting synchrotron SIS300 is planned to be built at the new Facility for Antiproton and Ion Research (FAIR), at GSI-Darmstadt [1]. SIS300 will be a versatile machine, which by means of a low-energy stretcher-mode or a high-energy ramped-mode will provide slowly extracted heavy ion beams towards the experimental areas. To reach the required maximum field of 4.5 T, cos(θ) magnets are necessary. Thus, SIS300 will become the first superconducting synchrotron worldwide with cos(θ) magnets providing resonant slow extraction.
Since SIS300 will be installed in the same tunnel as the SIS100 synchrotron, the dipole layout of SIS300 cannot be freely chosen. Thus, a standard lattice cannot be applied. A redesign of the SIS300 lattice accepting compromises concerning the positions and phase advances between the optical elements has been proposed. Using the analytical model of the slow extraction, firstly proposed by Kobayashi, and the analytical description of the resonance driving modes, a multiobjective optimization algorithm has been developed for the optimization of the lattice under the given boundary conditions. The final goal of the lattice optimization is a higher efficiency of the slow extraction. The results are evaluated by means of tracking simulations performed with the code Elegant.
The field quality in superconducting cos(θ) magnets is determined by the positions of the superconducting cable and the static and time-dependent effects of the current in the cable. Furthermore, the fast ramp rates of 1 T/s in the dipoles, which are fifty times faster than in any other superconducting cos(θ) magnet, together with the fact that the aperture is smaller than in conventional accelerator magnets, makes it extremely difficult to obtain a high-quality magnetic field. The unavoidable field errors affect the beam dynamics and worsen the slow extraction efficiency. Therefore, the field errors in the SIS300 dipoles have been estimated, and their effects have been taken into account in the optimization algorithm. As a result a compensation scheme has been proposed, in which time-dependent gradients in the sextupoles counteract the decay of the sextupole field errors in the dipole magnets during the slow extraction. For the limits where the compensation was no longer possible, tolerances to the magnet field errors have been determined.
Für das Helmholtzzentrum für Schwerionenforschung (GSI), in Darmstadt, wurde ein neuer RFQ zur Beschleunigung schwerer Ionen für den Hochladungsinjektor (HLI) entwickelt. Dieser RFQ hat den bereits vorhandenen ersetzt und soll, für die Anpassung des HLI an die neue 28 GHz-ECR-Ionenquelle, den Duty-cycle von 25 % auf 100 % erhöhen, um superschwere Ionen zu erzeugen und die Experimente mit schweren Ionen zu versorgen. Der RFQ hat die Aufgabe schwere, hochgeladene Ionen von 4 keV/u auf 300 keV/u zu beschleunigen. Wichtige Eigenschaften sind ein hoher Strahlstrom, eine hohe Strahl-Transmission, eine kleine Strahlemittanz und eine geringe transversale Emittanzzunahme. Die Erhöhung der Injektionsenergie von 2,5 keV/u auf 4 keV/u ermöglicht eine Verkleinerung des Konvergenzwinkels. Der Aufbau des 4-Rod-RFQs für den HLI ist Thema der vorliegenden Arbeit. Die Auslegung des HLI-RFQs bezieht sich auf ein festgelegtes max. Masse zu Ladungsverhältnis von A/q = 6, bei einer Betriebsfrequenz von 108,408 MHz. Die Ionen sollen bei einem Strahlstrom von 5 mA von 4 keV/u auf 300 keV/u beschleunigt werden. Durch die spezielle teilchendynamische Auslegung konnte die Länge des Tanks von vorher 3 m auf jetzt 2 m verkürzt werden. Dies begünstigt den CW-Betrieb der Struktur. Durch den CW-Betrieb hat man eine hohe Leistungsaufnahme, dies erfordert eine besondere teilchendynamische und hochfrequenztechnische Auslegung der RFQ-Struktur und eine effiziente Kühlung. Zur Simulation der Hochfrequenzeigenschaften wurde ein Modell des RFQ mit dem Programm Microwave Studio (MWS) erstellt. Die Simulationen ergaben einen nur 2 m langen RFQ mit sehr hoher Transmission > 95%. Nach den entsprechenden Simulationsrechnungen bezüglich der Teilchendynamik und der Hochfrequenzeigenschaften wurde der RFQ aufgebaut. Der zeitaufwändige Aufbau lässt sich in drei Abschnitte einteilen. Die Elektroden wurden präzise ausgemessen. Danach wurden Stützen, Elektroden und Tuningplatten an der Bodenplatte montiert und in den Tank eingesetzt. Im Tank wurden die Elektroden justiert, die zuerst außerhalb vermessen wurden. Die korrekte Position der Elektroden zur Referenzfläche wurde berechnet und mit Hilfe eines Faro-Gage im Tank eingemessen. Die maximale Abweichung der Elektrodenposition konnte auf 0,03 mm reduziert werden. Nach der mechanischen Einrichtung folgte die HF-Anpassung des Resonators. Durch das Erhöhen der Tuningplattenpositionen zwischen den Stützen konnte die Resonanzfrequenz von 90,8 MHz auf 108,4 MHz erhöht werden. Als nächstes wurde die Spannungsverteilung im Tank gemessen und mit Hilfe der Tuningplatten konnte sie so eingestellt werden, dass die maximale Abweichung zur mittleren Elektrodenspannung bei nur ± 2% liegt. Zur weiteren Hochfrequenzabstimmung wurde die Wirkung zweier Tauchkolben mit einem Durchmesser von 75 mm untersucht. Die Tauchkolben ermöglichen eine Anpassung der Frequenz im Bereich von 1,4 MHz. Sie sollen die möglichen Frequenzverschiebungen durch beispielsweise thermische Effekte, auf Grund des HF-Betriebs, regulieren. Für die Hochfrequenzabstimmung wurde eine Ankoppelschleife gefertigt und angepasst. Die Güte des Resonators betrug Q0 = 3100, bei einem RP-Wert RP = 100 kΩm, d.h. die zur Versorgung stehende HF-Leistung (50 kW im CW-Betrieb) reicht aus. An der GSI wurde nach dem Transport eine Kontrolle der Elektroden vorgenommen, danach wurde der RFQ erst einzeln, danach als komplette HLI Einheit getestet. Dazu wurden verschiedene Pulsmessungen und Emittanzmessungen mit Argon 7+ und Argon 8+ durchgeführt. Bei der ersten Strahlinbetriebnahme wurden die Transmission, die Ionenenergie und die Emittanz mit verschiedenen Ionen gemessen. Die ersten Tests des HLI-RFQ waren sehr vielversprechend. In den Tests war zu sehen, dass die vorgenommenen Arbeiten, wie Justage und HF-Abstimmung der Resonanzstruktur, erfolgreich waren. Danach wurde der Strahlbetrieb mit Calcium, bei einer Leistung von 50 kW, durchgeführt. Die gemessene Transmission bei einer Spannung von 43 kV lag bei 70 %. Im Mai 2010 gab es eine 14Stickstoff2+ -Strahlzeit mit einer gepulsten Leistung von N = 90 kW. Danach wurde Anpassungstests mit verschiedenen Schwerionen durchgeführt. Im November 2010 wurden neue Tuningplatten mit einer besseren Stützenkontaktierung sowie einer besseren Kühlung eingebaut. Die Elektroden wurden nach diesen Maßnahmen auf ± 0,04 mm einjustiert. Die Flatness liegt bei ± 2,1 %, die Güte beträgt Q0 = 3300. Der RFQ wurde in die Beamline eingebaut und geht im Januar 2011 in Betrieb.
Within the present work, photodissociation reactions on 100Mo, 93Mo and 92Mo isotopes were studied by means of the Coulomb dissociation method at the LAND setup at GSI. Experimental data on these isotopes are important to explain the problem of the underproduction of the lighter p-nuclei - 92; 94Mo - within the models of the p-process nucleosynthesis. The reaction rates used in the nucleosynthesis calculations are usually obtained within the framework of the statistical model. In order to verify the model predictions and reduce the uncertainties, experimental measurements of the reaction cross sections are required. In particular, the data on (γ,n) reactions are of interest, since these reactions were shown to dominate the p-process flow in the molybdenum mass region.
As a result of the analysis of the present experiment, integrated Coulomb excitation cross sections of the 100Mo(γ,n), 100Mo(γ,2n), 93Mo(γ,n) and 92Mo(γ,n) reactions were determined. The measurement of the 93Mo isotope is particularly important, since this nucleus is unstable, and the corresponding cross section has not been measured before.
It should be emphasized that Coulomb dissociation is a unique tool to study photoninduced reactions on unstable nuclei, which is especially relevant in the context of nucleosynthesis network calculations. However, because of to the complexity of the data analysis procedure and a number of model assumptions that are required in order to extract the Coulomb excitation cross section from the data, one of the main aspects of this thesis was to verify the method by comparing the results with the previously published data obtained with real photon beams. Integrated cross sections of the 100Mo(γ,n) and 100Mo(γ,2n) reactions were directly compared to the data by Beil et al., obtained at Saclay with photons from positron annihilation, while an indirect comparison could be performed with a recent photoactivation measurement by Erhard and co-workers. A reasonable agreement was observed for the 1n channel: a scaling factor of 0.8 ± 0.1 between our result and Beil et al. data is consistent with the scaling factor of 0.89±0.09 reported by Erhard et al. between their data and Beil et al. data. Both results are in agreement with the scaling factor of 0.85 ± 0.03 recommended by Berman et al. for the data measured at Saclay on nuclei in the respective mass region. A somewhat lower factor of 0.61 ± 0.09 between the present data and Beil et al. data was obtained for the 2n channel. The discrepancy might be explained by both the substantial efficiency correction that has to be applied to the LAND data in the two-neutron case, as well as by an insufficiently accurate assumption that the Saclay neutron detector efficiency is energy- and multiplicity- independent.
A second important topic of the present thesis is the investigation of the efficiency of the CsI gamma detector. The calorimetric information that it delivers is essential to reconstruct the energy-differential cross section from the present measurement. The data taken with the gamma calibration sources shortly after the experiment were used for the investigation. In addition, a test experiment in refined conditions was conducted within the framework of this thesis. Numerous GEANT3 simulations of the detector were performed in order to understand various aspects of its performance. As a result, the efficiency of the detector was determined to be approximately a factor of 2 lower than the efficiency expected from the simulation. This result is consistent with several independent investigations, which were performed using different methods. At the same time, a remarkable agreement between the simulated and experimental data was achieved under assumption that the inefficiency of the detector is explained by the loss of data from a number of crystals, which are randomly chosen in each event according to their averaged performance ratio (the ”on-off” effect). The reasons for the observed malfunction are yet not fully clear. Regardless of the exact reason, in the present conditions a deconvolution of the measured data from the CsI response is not possible. Consequently, within the framework of this thesis, the results are presented in terms of integrated cross sections. A search for alternative methods of data interpretation, allowing to extract energy-differential information out of the available data, in currently ongoing.
In the more recent experiments at the LAND setup, where the Crystal Ball gamma detector was used as a calorimeter, the reconstruction of the energy-differential cross section with a reasonable resolution was already shown to be feasible. It means that, even considering the uncertainties of the present experiment of the order of 10%, the uncertainties of the statistical model predictions, which are on average estimated to be within a factor of 1.5-2, can already be constrained.
The analysis of the present experiment is still in progress. As a next step, Coulomb excitation cross section for 94Mo will be obtained. The 94Mo(γ,n) reaction cannot be studied by photoactivation, since the life time of the daughter nucleus is too long (4000 y). At the same time, this reaction plays a key role in the p-process nucleosynthesis.
The future of the LAND setup - the R3B setup1 at FAIR2 - will take advantage of a three orders of magnitude higher intensity of the radioactive beams [85], as well as of a completely new detector system. High-resolution measurements of the energy-differential cross sections will be possible for exotic nuclei, which were never accessible in the laboratory before. Such measurements will open great opportunities for nuclear astrophysics, allowing to obtain high-quality experimental data even for regions of the nuclear chart where the statistical model calculations are not applicable.
Ziel der durchgeführten Experimente war es, die Zerfallsmechanismen Van-der-Waals gebundener Argon- und Neon Di- und Trimere in intensiven Laserfeldern zu untersuchen, um mehr über den Einfluss der schwachen Van-der-Waals Bindung auf die Dynamik des Ionisationsprozesses zu erfahren. Da Dimere aufgrund ihrer elektronischen Struktur sehr stark zwei separaten benachbarten Atomen gleichen, vereinen sie atomare und molekulare Eigenschaften in sich und ihre Untersuchung verspricht ein tieferes Verständnis der Wechselwirkungsmechanismen in starken Laserfeldern. Die Verwendung der Impulsspektroskopie Methode COLTRIMS ermöglichte die koinzidente Messung aller beim Aufbruch entstandener ionischer Fragmente sowie eines elektronischen Impulsvektors. Für die beidseitige Einfachionisation des Argon Dimers, konnten bei der gewählten Intensität (etwa 3.3E14W/cm2) drei unterschiedliche Ionisationsprozesse identifiziert werden, von denen zwei zu einer überraschend hohen kinetischen Gesamtenergie der Ionen führen. Aufgrund der Messung der Winkelverteilung der ionischen Fragmente und eines der emittierten Elektronen für lineare und zirkulare Polarisation gelang es, die den drei Prozessen zugrunde liegende Dynamik im Laserfeld zu entschlüsseln. Der dominierende Zerfallskanal stellt demzufolge eine schnelle sequentielle Doppelionisation des Argon Dimers dar, die noch am Gleichgewichtsabstand des Dimers stattfindet. Für den zweithäufigsten Ionisationsprozess ergaben sich zwei mögliche Erklärungsansätze: Entweder wird das Dimer zunächst einseitig doppelionisiert, so dass es auf einer attraktiven Potentialkurve zusammenläuft, bevor es zu einem späteren Zeitpunkt – wenn das Laserfeld bereits abgeklungen ist – durch eine Umverteilung seiner Ladungen in einer Coulomb Explosion fragmentiert, oder das Dimer wird bei einer beidseitigen Tunnelionisation zugleich angeregt, so dass die Coulomb Explosion von einer Potentialkurve erfolgt, die wesentlich steiler als 1/R verläuft. Der schwächste Zerfallskanal, der sich durch die höchste Gesamtenergie auszeichnet, ist auf eine "Frustrated Triple Tunnel Ionization" zurückzuführen, bei der ein hoch angeregter Rydberg Zustand erzeugt wird. Bei der Untersuchung des Neon Dimers konnte bei der gewählten Intensität (etwa 6.3E14W/cm2) nur die sequentielle beidseitige Einfachionisation identifiziert werden, obwohl die Daten Hinweise auf einen weitern Ionisationsprozess mit sehr geringer Statistik aufweisen. Zudem wurde in dieser Arbeit nach der Methode des Coulomb-Explosion-Imaging aus den in Koinzidenz gemessenen Impulsvektoren aller einfachgeladenen ionischen Fragmente eines Aufbruchs die geometrische Struktur der Cluster im Orts-und Impulsraum rekonstruiert. Die ermittelte Grundzustandswellenfunktion des Argon und Neon Dimers zeigt eine gute Übereinstimmung mit quantenmechanischen Berechnungen. Für das Argon und Neon Trimer konnten aus den gemessenen Impulsvektoren mittels einer numerischen Simulation die Bindungswinkel im Ortsraum bestimmt werden, so dass erstmals gezeigt werden konnte, dass diese Trimere gleichseitige Dreieckskonfigurationen aufweisen. Vergleiche mit theoretischen Berechnungen zeigen für die breite Winkelverteilung des Neon Trimers eine hervorragende Übereinstimmung, während die gemessene Winkelverteilung des Argon Trimers etwas breiter als die berechnete ist.
The miniaturization of electronics is reaching its limits. Structures necessary to build integrated circuits from semiconductors are shrinking and could reach the size of only a few atoms within the next few years. It will be at the latest at this point in time that the physics of nanostructures gains importance in our every day life. This thesis deals with the physics of quantum impurity models. All models of this class exhibit an identical structure: the simple and small impurity only has few degrees of freedom. It can be built out of a small number of atoms or a single molecule, for example. In the simplest case it can be described by a single spin degree of freedom, in many quantum impurity models, it can be treated exactly. The complexity of the description arises from its coupling to a large number of fermionic or bosonic degrees of freedom (large meaning that we have to deal with particle numbers of the order of 10^{23}). An exact treatment thus remains impossible. At the same time, physical effects which arise in quantum impurity systems often cannot be described within a perturbative theory, since multiple energy scales may play an important role. One example for such an effect is the Kondo effect, where the free magnetic moment of the impurity is screened by a "cloud" of fermionic particles of the quantum bath.
The Kondo effect is only one example for the rich physics stemming from correlation effects in many body systems. Quantum impurity models, and the oftentimes related Kondo effect, have regained the attention of experimental and theoretical physicists since the advent of quantum dots, which are sometimes also referred to as as artificial atoms. Quantum dots offer a unprecedented control and tunability of many system parameters. Hence, they constitute a nice "playground" for fundamental research, while being promising candidates for building blocks of future technological devices as well.
Recently Loss' and DiVincenzo's p roposal of a quantum computing scheme based on spins in quantum dots, increased the efforts of experimentalists to coherently manipulate and read out the spins of quantum dots one by one. In this context two topics are of paramount importance for future quantum information processing: since decoherence times have to be large enough to allow for good error correction schemes, understanding the loss of phase coherence in quantum impurity systems is a prerequisite for quantum computation in these systems. Nonequilibrium phenomena in quantum impurity systems also have to be understood, before one may gain control of manipulating quantum bits.
As a first step towards more complicated nonequilibrium situations, the reaction of a system to a quantum quench, i.e. a sudden change of external fields or other parameters of the system can be investigated. We give an introduction to a powerful numerical method used in this field of research, the numerical renormalization group method, and apply this method and its recent enhancements to various quantum impurity systems.
The main part of this thesis may be structured in the following way:
- Ferromagnetic Kondo Model,
- Spin-Dynamics in the Anisotropic Kondo and the Spin-Boson Model,
- Two Ising-coupled Spins in a Bosonic Bath,
- Decoherence in an Aharanov-Bohm Interferometer.