Doctoral Thesis
Refine
Year of publication
Document Type
- Doctoral Thesis (5744) (remove)
Language
- German (3646)
- English (2069)
- French (9)
- Latin (5)
- Spanish (5)
- Portuguese (4)
- Italian (3)
- Multiple languages (2)
- mis (1)
Is part of the Bibliography
- no (5744)
Keywords
- Deutschland (15)
- Gentherapie (14)
- HIV (13)
- Apoptosis (12)
- Membranproteine (12)
- NMR-Spektroskopie (11)
- RNA (11)
- RNS (10)
- Schmerz (10)
- ALICE (9)
Institute
- Medizin (1532)
- Biowissenschaften (836)
- Biochemie und Chemie (729)
- Physik (597)
- Pharmazie (329)
- Biochemie, Chemie und Pharmazie (313)
- Geowissenschaften (139)
- Neuere Philologien (115)
- Gesellschaftswissenschaften (111)
- Psychologie (97)
Heterodyne array receivers are employed in radio astronomy to reduce the observing time needed for mapping extended sources. One of the main factors limiting the amount of pixels in terahertz receivers is the difficulty of generating a sufficient amount of local oscillator power. Another challenge is efficient diplexing and coupling of local oscillator and signal power to the detectors. These problems are attacked in this dissertation by proposing the application of two vacuum electronic terahertz amplifier types for the amplification of the LO-signal and by introducing a new method for finding the defects in a quasioptical diplexer.
A traveling wave tube (TWT) design based on a square helix slow wave structure (SWS) at 825 GHz is introduced. It exhibits a simulated small-signal gain of 18.3 dB and a 3-dB bandwidth of 69 GHz. In order to generate LO-power at even higher frequencies, the operation of an 850-GHz square helix TWT as a frequency doubler has been studied. A simulated conversion efficiency of 7% to 1700 GHz, comparable with the state-of-art solid-state doublers, has been achieved for an input power of 25 mW.
The other amplifier type discussed in this work is a 1-THz cascade backward wave amplifier based on a double corrugated waveguide SWS. Specifically, three input/output coupler types between a rectangular waveguide and the SWS are presented. The structures have been realized with microfabrication, and the results of loss measurements at 1 THz will be shown.
Diplexing of the LO- and signal beams is often performed with a Martin-Puplett interferometer. Misalignment and deformation of the quasioptical components causes the polarization state of the output signal to be incorrect, which leads to coupling losses. A ray-tracing program has been developed for studying the influence of such defects. The measurement results of the diplexer of a multi-pixel terahertz receiver operated at the APEX telescope have been analyzed with the program, and the results are presented. The program allows the quasioptical configuration of the diplexer to be corrected in order to obtain higher receiver sensitivity.
Modern computational molecular quantum chemical studies, such as the present one, typically employ a wide range of theoretical techniques. The latter are often rather complicated and one should not generally expect that an experimental scientist in the area of physical chemistry, a potential reader of this work, should be familiar with all these techniques. To simplify the reading of the Thesis and to make it self-sufficient, it is supplied with an overview of the employed theoretical methodologies (Chapter 1). The overview explains basic quantum-chemical terminology referred to throughout the Thesis, introduces theoretical foundations of the methods and outlines their properties and limitations. In Part 1.1 of Chapter 1, methods for the solution of the molecular Schrödinger equation are introduced, while in the subsequent Parts 1.2 and 1.3 methods for the solution of the electronic Schrödinger equation are presented to find the ground and excited states, respectively. Part 1.4 is dedicated to basis-set effects which are omnipresent in electronic-structure calculations. It contains a number of unusual insights and concepts proposed by the author and, thus, may be insightful also to experts in quantum chemistry.
In Chapter 2, the phenomenon of acetone-water proton exchange catalyzed by tubular as well as amorphous aggregates of calix[4]hydroquinone (CHQ) macromolecules, which has been observed previously in NMR experiments (Ref. D1D), is investigated by means of correlated quantum-chemical methods. The first part of the study (Section 2.3-2.7) considers concerted proton transfer, assisted by several initially neutral OH-groups in the hydrogen-bonded networks of CHQ aggregates. The second part of the study (Section 2.8-2.13) is dedicated to a second mechanism of proton exchange: step-wise proton transfer via formation of ionic intermediates resulting from CHQ pre-dissociation. CHQ application-specific as well as general conclusions, relevant to the main topic of the Thesis (i.e. influence of specific microsolvation on the considered proton transfer processes), are presented in Section 2.14.
The phenomenon of dual fluorescence observed in clusters of methyl 4-N,N-dimethylaminobenzoate ester (DMABME) and two water molecules in the gas phase, is studied in Chapter 3. Experimentally, the dual fluorescence was detected in experiments combining optical and ground-state ion-depletion infrared spectroscopies in ultracold molecular beams (Ref. D2D). In Section 3.3, calculated ground-state infrared spectra are presented that allow to identify the structures of those isomers, which are present in the gas-phase, as well as the structure of the isomer responsible for dual fluorescence. To further understand the reaction mechanism of dual fluorescence, excited-state potential energy surfaces of the identified isomers were computed along the relevant twisted intermolecular charge-transfer formation coordinate and the mechanism of energy dissipation in these complexes was investigated (Section 3.4-3.5) (Ref. D3D). A brief summary of the main results of this chapter and conclusions are given in Section 3.6. Finally, in Section 3.7 a complementary benchmark study of the quality of ground-state potential energy surfaces of prototypical hydrogen-bonded systems (ammonia-water and formic acid-water dimers) obtained at the level of BSSE-corrected MP2 combined with moderate basis sets, has been conducted. The quality of potential energy surfaces was tested with respect to basis-set size, level of electron correlation and anharmonicity effects and the applied methodology to identify the IR spectrum of hydrated DMABME complexes (Section 3.3) has been found to be sufficient to uniquely assign the IR spectra.
Das Gehirn ist die wohl komplexeste Struktur auf Erden, die der Mensch erforscht. Es besteht aus einem riesigen Netzwerk von Nervenzellen, welches in der Lage ist eingehende sensorische Informationen zu verarbeiten um daraus eine sinnvolle Repräsentation der Umgebung zu erstellen. Außerdem koordiniert es die Aktionen des Organismus um mit der Umgebung zu interagieren. Das Gehirn hat die bemerkenswerte Fähigkeit sowohl Informationen zu speichern als auch sich ständig an ändernde Bedingungen anzupassen, und zwar über die gesamte Lebensdauer. Dies ist essentiell für Mensch oder Tier um sich zu entwickeln und zu lernen. Die Grundlage für diesen lebenslangen Lernprozess ist die Plastizität des Gehirns, welche das riesige Netzwerk von Neuronen ständig anpasst und neu verbindet. Die Veränderungen an den synaptischen Verbindungen und der intrinsischen Erregbarkeit jedes Neurons finden durch selbstorganisierte Mechanismen statt und optimieren das Verhalten des Organismus als Ganzes. Das Phänomen der neuronalen Plastizität beschäftigt die Neurowissenschaften und anderen Disziplinen bereits über mehrere Jahrzehnte. Dabei beschreibt die intrinsische Plastizität die ständige Anpassung der Erregbarkeit eines Neurons um einen ausbalancierten, homöostatischen Arbeitsbereich zu gewährleisten. Aber besonders die synaptische Plastizität, welche die Änderungen in der Stärke bestehender Verbindungen bezeichnet, wurde unter vielen verschiedenen Bedingungen erforscht und erwies sich mit jeder neuen Studie als immer komplexer. Sie wird durch ein komplexes Zusammenspiel von biophysikalischen Mechanismen induziert und hängt von verschiedenen Faktoren wie der Frequenz der Aktionspotentiale, deren Timing und dem Membranpotential ab und zeigt außerdem eine metaplastische Abhängigkeit von vergangenen Ereignissen. Letztlich beeinflusst die synaptische Plastizität die Signalverarbeitung und Berechnung einzelner Neuronen und der neuronalen Netzwerke.
Der Schwerpunkt dieser Arbeit ist es das Verständnis der biologischen Mechanismen und deren Folgen, die zu den beobachteten Plastizitätsphänomene führen, durch eine stärker vereinheitlichte Theorie voranzutreiben.Dazu stelle ich zwei funktionale Ziele für neuronale Plastizität auf, leite Lernregeln aus diesen ab und analysiere deren Konsequenzen und Vorhersagen.
Kapitel 3 untersucht die Unterscheidbarkeit der Populationsaktivität in Netzwerken als funktionales Ziel für neuronale Plastizität. Die Hypothese ist dabei, dass gerade in rekurrenten aber auch in vorwärtsgekoppelten Netzwerken die Populationsaktivität als Repräsentation der Eingangssignale optimiert werden kann, wenn ähnliche Eingangssignale eine möglichst unterschiedliche Repräsentation haben und dadurch für die nachfolgende Verarbeitung besser unterscheidbar sind. Das funktionale Ziel ist daher diese Unterscheidbarkeit durch Veränderungen an den Verbindungsstärke und der Erregbarkeit der Neuronen mithilfe von lokalen selbst-organisierten Lernregeln zu maximieren. Aus diesem funktionale Ziel lassen sich eine Reihe von Standard-Lernenregeln für künstliche neuronale Netze gemeinsam abzuleiten.
Kapitel 4 wendet einen ähnlichen funktionalen Ansatz auf ein komplexeres, biophysikalisches Neuronenmodell an. Das Ziel ist eine spärliche, stark asymmetrische Verteilung der synaptischen Stärke, wie sie auch bereits mehrfach experimentell gefunden wurde, durch lokale, synaptische Lernregeln zu maximieren. Aus diesem funktionalen Ansatz können alle wichtigen Phänomene der synaptischen Plastizität erklärt werden. Simulationen der Lernregel in einem realistischen Neuronmodell mit voller Morphologie erklären die Daten von timing-, raten- und spannungsabhängigen Plastizitätsprotokollen. Die Lernregel hat auch eine intrinsische Abhängigkeit von der Position der Synapse, welche mit den experimentellen Ergebnissen übereinstimmt. Darüber hinaus kann die Lernregel ohne zusätzliche Annahmen metaplastische Phänomene erklären. Dabei sagt der Ansatz eine neue Form der Metaplastizität voraus, welche die timing-abhängige Plastizität beeinflusst. Die formulierte Lernregel führt zu zwei neuartigen Vereinheitlichungen für synaptische Plastizität: Erstens zeigt sie, dass die verschiedenen Phänomene der synaptischen Plastizität als Folge eines einzigen funktionalen Ziels verstanden werden können. Und zweitens überbrückt der Ansatz die Lücke zwischen der funktionalen und mechanistische Beschreibungsweise. Das vorgeschlagene funktionale Ziel führt zu einer Lernregel mit biophysikalischer Formulierung, welche mit etablierten Theorien der biologischen Mechanismen in Verbindung gebracht werden kann. Außerdem kann das Ziel einer spärlichen Verteilung der synaptischen Stärke als Beitrag zu einer energieeffizienten synaptischen Signalübertragung und optimierten Codierung interpretiert werden.
Development of prototype components for the Silicon Tracking System of the CBM experiment at FAIR
(2013)
The CBM experiment at future accelerator facility FAIR will investigate the properties of nuclear matter under extreme conditions. The experimental programm is different from the heavy-ion experiments at RHIC (BNL) and LHC (CERN) that create nuclear matter at high temperatures. In contrast, the study of the QCD phase diagram in the region of the highest net baryon densities and moderate temperatures that is weakly explored will be performed with high precision. For this, collisions of different heavy-ion beams at the energies of 10–45GeV/nucleon with nuclear target will be measured.
The physics programme of the CBM experiment includes measurement of both rare probes and bulk observables that originate from various phases of a nucleus-nucleus collision. In particular, decay of particles with charm quarks can be registered by reconstructing the decay vertex detached from the primary interaction point by several hundreds of micrometers (e.g., decay length c Tau = 123 µm for D0 meson). For this, precise tracking and full event reconstruction with up to 600 charged particle tracks per event within acceptance are required. Other rare probes require operation at interaction rate of up to 10MHz. The detector system that performs tracking has to provide high position resolution on the order of 10 µm, operate at high rates and have radiation tolerant design with low material budget.
The Silicon Tracking System (STS) is being designed for charged-particle tracking in a magnetic field. The system consists of eight tracking station located in the aperture of a dipole magnet with 1T field. For tracks with momentum above 1GeV, momentum resolution of such a system is expected to be about 1%. In order to fulfill this task, thorough optimization of the detector design is required. In particular, minimal material budget has to be achieved.
Production of a detector module requires research and development activities with respect to the module components and their integration. A detector module is a basic functional unit that includes a sensor, an analogue microcable and frontend electronics mounted on a support structure. The objective of the thesis is to perform quality assurance tests of the prototype module components in order to validate the concept of the detector module and to demonstrate its operation using radioactive sources and particle beams.
Double-sided silicon microstrip detectors have been chosen as sensor technology for the STS because of the combination of a good spatial resolution, two-dimensional coordinate measurement achieved within low material budget (0.3%X0), high readout speed and sufficient radiation tolerance. Several generations of double-sided silicon microstrip sensors have been manufactured in order to explore the radiation hard design features and the concept of a large-area sensor compatible with ladder-type structure of the detector module. In particular, sensors with double metal layer on both sides and active area of 62×62mm2 have been produced. Electrical characterization of the sensors has been performed in order to establish the overall operability as well as to extract the device parameters. Current-voltage, capacitance-voltage characteristics and interstrip parameters have been measured.
Readout of the sensors has been done using self-triggering front-end electronics. A front-end board has been developed based on the n-XYTER readout chip with data driven architecture and capable of operating at 32MHz readout rate. The front-end board included an external analog-to-digital converter (ADC). Calibration of the ADC has been performed using both 241Am X-ray source and external pulse generator. Threshold calibration and investigation of temperature dependence of chip parameters has been carried out.
Low-mass support structures have been developed using carbon fibre that has the rigidity to hold the detector modules and introduce minimal Coulomb scattering of the particle tracks. Analogue microcables have been produced with aluminium traces on a polyimide substrate, thus combining good electrical connection with low material budget. Microcable structure includes several layers optimized for low trace capacitance and thus low-noise performance.
A demonstrator tracking telescope has been constructed and operated in several beam tests including 2.5GeV proton beam at COSY synchrotron (Jülich). Three tracking stations have been complemented with several beam hodoscopes. Analysis of the beam data has yielded information on analogue and timing response, beam profile. Tracking and alignment information has been obtained. Beam stability has been evaluated using specially developed monitoring tools.
As a result of conducted studies, performance of the module components have been evaluated and requirements to the detector module have been formulated. Practical suggestions have been made with respect to the structure of the detector module, whereas precise definition of the final detector module design was outside of the scope of this thesis.
Die Dissertation betrachtet zunächst die Anatomie der Lautentstehung und die Historie von Untersuchungen zu Sprechtraktakustik (u.a. Ibn Sina, Hook, Mical, Kratzenstein, Kempelen, Faber, Wheatstone, Helmholz, Riesz, Dunn, Chiba, Kajiyama, Kelly, Lochbaum, Saito, Itakura, Burg ) und geht insbesondere auf das Rohrmodell zu Beschreibung der Vokaltraktakustik ein.
Mittels Finiter-Differenzen wird die Aksutik der Sprechens dann dreidimensional beschrieben, und die zuätzlich auftretenden Effekte betrachtet. Fur die sich beim Sprechen schnell bewegende Mundhöhle wird ein Verfahren entwickelt und untersucht, mittels Sprachsignalen durch inverse Filterung und MRT-Aufnahmen die räumliche Konfiguration zu bestimmen. Für den Nasaltrakt wurden dreidimensional abbildende Verfahren aus der medizinischen Diagnostik verglichen (MRT und CT), und anhand eines Computer-Tomographischen Datensatzes die akustischen Vorgänge dreidimensional bestimmt.
Die Funktion der äußeren Haarsinneszellen geht weit über die normale Rezeptoreigenschaft der Kategorie Mechanorezeptor hinaus. Äußere Haarzellen mit ihrer reichhaltigen efferenten Innervierung sind nicht nur für die sensorische Aufnahme mechanischer Bewegung zuständig, sondern ermöglichen aufgrund ihrer motorischen Funktionen die mechanische Verstärkung der Wanderwelle in der Cochlea. Äußere Haarzellen sind eine maßgebliche Komponente des ´cochleären Verstärkers` und ihr Ausfall führt zur Schwerhörigkeit. Beiprodukte des cochleä-ren Verstärkers sind otoakustische Emissionen, deren Messung Aufschluss über aktive mechanische Prozesse im Innenohr gibt.
Die äußeren Haarsinneszellen bilden Synapsen mit dem olivo-cochleären efferenten System, welches im Zentrum der vorliegenden Untersuchung steht. Es vermittelt den Einfluss des Zentralnervensystems auf das Corti-Organ des Innenohrs. Über die akustische Reizung des olivo-cochleären Reflexbogens ist man in der Lage, das efferente System zu aktivieren und gleichzeitig die Antworteigenschaften der Cochlea zu verändern. Efferente Modulationen des cochleären Verstärkers können sich z. B. in einer Veränderung des Emissionspegels bemerk-bar machen. Die Fledermausspezies Carollia perspicillata ist aufgrund ihres Echoortungs-systems mit einem sehr sensitiven und hochauflösenden Hörvermögen ausgestattet und eignet sich hervorragend als Modelltier in der Hörforschung, insbesondere auch deshalb, da oto-akustische Emissionen sehr gut messbar sind.
Das efferente System von C. perspicillata wurde in dieser Untersuchung durch akustische Stimulation der kontralateralen Cochlea angeregt. Die Stimuli, die nicht nur in ihrem Pegel sondern auch in ihrer Bandbreite und in der Mittelfrequenz in Relation zu den ipsilateralen Stimulusfrequenzen variierten, beeinflussten dabei die Generierung der otoakustischen Emis-sionen (DPOAE, engl: distortion product otoacoustic emissions) im ipsilateralen Ohr: akustische Stimulation der kontralateralen Cochlea bewirkte zuverlässig eine Änderung der DPOAE- Amplitude im kontralateralen Ohr. Vor allem eine Suppression des cochleären Verstärkers in Form von DPOAE-Pegelverminderungen wurde beobachtet. Die supprimieren-den Effekte erreichten trotz leiser bis moderater kontralateraler Rauschpegel (bis maximal 54 dB SPL) Werte von bis zu 14, 17.1 und 13.9 dB SPL (bei f2 = 20, 40 und 60 kHz und effek-tivstem kontralateralen Rauschstimulus) und waren damit deutlich größer als in vorangegang-enen Studien an anderen Spezies. Die DPOAE-Pegelverminderungen waren positiv mit dem x Pegel der kontralateralen akustischen Stimulation, ebenso wie seiner Bandbreite und der Mittelfrequenzen in Relation zu den ipsilateralen Stimulusfrequenzen korreliert. Es gab keinen absoluten Frequenzbereich, in dem die efferenten Effekte am größten gewesen wären. Vielmehr traten maximale Effekte immer durch etwas oberhalb der ipsilateralen Stimulusfre-quenzen gelegene kontralaterale Rauschstimuli auf. Die Effekte waren auch abhängig von der Bandbreite des kontralateralen Rauschstimulus und maximal bei einer relativen Bandbreite von 1.5 Oktaven. Die Verschiebung des efferenten Effekts hin zu hohen Frequenzen und die Bandbreitenabhängigkeit sind vereinbar mit den anatomischen Eigenschaften der Projektio-nen der medialen olivo-cochleären Efferenzen in der Säugetiercochlea. Kontralaterale akusti-sche Reizung bewirkte auch eine Verschiebung der Wachstumsfunktionen der 2f1-f2 -DPOAE in einen unsensitiven Bereich und außerdem eine Verformung der Wachstumsfunktion. Bei-des könnte durch Beeinträchtigung des cochleären Verstärkers verursacht sein. Eine Beteili-gung des Mittelohrmuskels an den Effekten kann nahezu ausgeschlossen werden und die beobachteten Effekte sind höchstwahrscheinlich dem olivo-cochleären System zuzuschreiben.
Funktionell ist denkbar, dass bei C. perspicillata das mediale olivo-cochleäre System im Kontext einer Frequenzverschärfung bei der cochleären Verstärkung der Basilarmembranbe-wegung aktiv wird. Aus diesem Grund wurden ipsilateral sogenannte DPOAE-Suppressions- Abstimmkurven gemessen, welche die mechanische Abstimmschärfe im Innenohr beschrei-ben. Während und nach kontralateraler Reizung kam es zu Veränderungen der Abstimmkur-ven. Signifikante Effekte konnten allerdings nicht festgestellt werden, da die Veränderungen der Suppressions-Abstimmkurven variabel und schlecht kategorisierbar war.
Die vorliegenden Ergebnisse unterstützen weit verbreitete Hypothesen zur Funktion der medialen olivo-cochleären Effernzen in Bezug auf mechanische Suppression, Verbesserung des cochleären Signal-Rauschverhältnisses und einer generellen frequenzspezifischen Wirkung.
Transylvanian Saxons' migration from Romania to Germany: the formation of a 'return' diaspora?
(2013)
Processes and patterns of migration on a global scale have changed in profound ways during the last two decades (Smith and King, 2012). In the European context, this is exemplified by transformations to the traditional mobility patterns from East to West Europe (Koser and Lutz, 1998), with migrants more likely to be involved in temporary circular and transnational mobility (Favell, 2008). Since the end of the Second World War, historical and political events in Europe have facilitated the mobility of ethnic Germans from Eastern Europe to Germany. Subsequently, the fall of the Iron Curtain has permitted unrestrained East-West movements, which resulted in mass migrations towards the West and diaspora fragments in the East. However, after settlement in the West, ethnic Germans have also been absorbed within wider temporary and transnational movements (Koser, 2007). Within this context, this thesis examines the post-migratory lives of three generations of Transylvanian Saxons in Germany by exploring the cultural, social, economic and political dimensions of this community. This thesis aims to contribute to on-going academic debates about diasporas by explicitly responding to Hoerder s (2002) call for more studies on ethnic German diasporas. It shows that Transylvanian Saxons, who relocated to the ancestral homeland, do not disrupt identities and lives forged in diaspora, but rather, they negotiate complex identities and belongings in relation to both home and homeland . It reveals a double diaspora and the necessity to perceive identity and diaspora as dynamic processes and constantly evolving in relation to time, space and place. This double diasporic allegiance in the case of the Transylvanian Saxons suggests interrogating the formation of a return diaspora and its importance for processes of international migration.
Gridded maps of meteorological variables are needed for the evaluation of weather and climate models and for climate change monitoring. In order to produce them, values at locations where no observing stations are available need to be estimated from point-wise observations. For the interpolation of meteorological observations deterministic and stochastic methods are often combined. Deterministic methods can account for ancillary information such as elevation, continentality or satellite observations. Stochastic methods such as kriging reproduce observed values at the station locations and also account for spatial variability. In the first two studies of this thesis, a flexible interpolation method for the gridding of locally observed daily extreme temperatures is developed that also provides an optimal estimate of the interpolation ncertainty. In the third study, an observational dataset is created using this interpolation method and then applied to evaluate a climate simulation for Africa.
In the first study, the Regression-Kriging-Kriging (RKK) method is tested for the interpolation of daily minimum and maximum temperatures (Tmin and Tmax) in different regions in Europe. RKK accounts for elevation, continentality index and zonal mean temperature and is applicable in regions of differing station density and climate. The accuracy of RKK is compared to Inverse Distance Weighting, a common deterministic interpolation method, and to Ordinary Kriging, a common stochastic interpolation method. The first step in RKK is to use regression kriging, in which multiple linear regression accounts for topographical effects on the temperature field and kriging minimizes the regression error, to interpolate climatological means. In the second step daily deviations from the monthly climatology are interpolated using simple kriging. Owing to the large climatological differences across the investigation area the interpolation is performed in homogeneous subregions defined according to the Köppen-Geiger climate classification. Cross validation demonstrates the superiority of RKK over the simpler algorithms in terms of accuracy and preservation of spatial variability. The interpolation performance however strongly varies across Europe, being considerably higher over Central Europe (highest station density) than over Greenland (few stations along the coast line). This illustrates the strong impact of the station density on the accuracy of the interpolation result. Satellites provide comprehensive observations of climate variables such as land surface temperature (LST) and cloud cover (CC). However, LST is associated with high uncertainty (standard error ~ 1-2°C), preventing its direct application in meteorology and climatology. The second study investigates the usefulness of LST and CC as predictors for the gridding of daily Tmin and Tmax. The RKK algorithm is compared with similar interpolation methods that apply LST and CC in addition to the predictors used with the RKK algorithm. The investigation is conducted in two regions, Central Europe and the Iberian Peninsula, which differ strongly in average cloud cover (Central Europe is approximately 30% cloud free and the Iberian Peninsula approximately 60 % cloud free). RKKLST (in which monthly mean LST is used as an additional predictor) yields for Central Europe no clear improvement over RKK, yet it reduces the interpolation error over the Iberian Peninsula. This finding can be explained by the higher percentage of cloud free pixels over that region in summer which enables a more robust determination of monthly mean LST. Adding a regression step for daily anomalies (using the predictor CC) yields the RKRK method and improves the preservation of spatial variability over the Iberian Peninsula. Moreover, a successive reduction of the station number (from 140 to 10 stations) reveals an increasing superiority of RKKLST and RKRK over RKK in both regions.
The application of a gridded observational dataset for climate monitoring or climate model validation requires knowledge of the uncertainties associated with the dataset. The estimation of the interpolation uncertainty, here the inter quartile range is the used uncertainty measure, is therefore an important issue within the frame of this thesis. By means of cross validation it is shown that the largest uncertainties occur in regions of low station density (e.g. Greenland), in mountainous regions and along coastlines (in these regions model evaluation results should be interpreted carefully). The magnitude of the interpolation error mainly depends on the station density, while the complexity of terrain has substantially less influence. On average over all regions and investigation days the target precision of the uncertainty estimate is reached. However, on local scales and for single days it can be clearly over- or underestimated. The application of satellite-derived predictors (LST and CC) yields no noteworthy improvement of the uncertainty estimate.
In the last study two regional climate simulations for Africa using the ERA-Interim driven COSMO-CLM (CCLM) model at two different horizontal resolutions (0.22° and 0.44°) are validated. It is assessed whether observed patterns and statistical properties of daily Tmin and Tmax are correctly represented in the model. The ERA-Interim reanalysis and a specially created observational dataset are used as reference. The observational dataset is generated by applying the RKRK algorithm (developed within the second study). The investigations show an occasionally large bias in Tmin and Tmax. The hemispheric summers are generally too warm and the temporal variability in temperature is too high, particularly over extra tropical Africa. The diurnal temperature range is overestimated by about 2°C in the northern subtropics but underestimated by about 2°C over large parts of the African tropics. CCLM reproduces the observed frequency distribution of daily Tmin and Tmax in all African climate regions, and the extreme values in the lower percentiles (5, 10, 20%) for Tmin are well simulated. The higher percentiles (80, 90, 95%) for Tmax are however overestimated by 2-5°C. For both Tmin and Tmax the 0.22° simulation is on average 0.5°C warmer than the 0.44° simulation. Additionally, the higher percentiles are about 1°C warmer for both Tmin and Tmax in the higher resolution run, while the lower percentiles in both runs match very well. Although the temperature pattern is represented in more detail along the coastlines and in topographically complex regions, the higher resolution simulation yields no qualitative improvement.
To summarize, the choice of the appropriate algorithm mainly depends on the interpolation conditions. In cases where the station density is high across the target region and the predictor space is adequately covered by observing stations, the computationally less demanding RK algorithm should be preferred. In regions where the station density is low the more robust RKRK algorithm should be the first choice. Due to the strong physical relation of both CC and LST to Tmin and Tmax the missing information is at least partially compensated for. The estimation of the interpolation uncertainty could be improved by applying a normal score transformation to the data prior to a kriging step. This is because the kriging assumption that the increments of the variable of interest are second order stationary can be approximately met by a normal score transformation.
In den vergangenen Jahren haben ökologische Fragen in der Naturstoffforschung mehr und mehr an Bedeutung gewonnen. Naturstoffe bilden dabei einen wichtigen Aspekt in der Aufrechterhaltung symbiotischer Systeme.
Symbiosen stellen eine der treibenden Kräfte der Evolution dar. Diese artenübergreifende Interaktion zweier Organismen ermöglicht die Evolution in wechselseitiger Anpassung, wobei per Definition in die Kategorien Mutualismus, Kommensalismus und Parasitismus unterschieden wird. Teilweise führt die obligatorische Abhängigkeit eines Organismus zum partiellen Merkmals- und Stoffwechselwegverlust, der durch seinen Symbiose-Partner kompensiert wird. In den meisten Fällen stellt Symbiose ein komplexes Netzwerk aus mehr als zwei Lebewesen dar.
Diese Arbeit beschreibt die Anwendung der Klonierungsmethode ExRec ("overlap extension PCR-yeast homologous recombination") für die vereinfachte Bereitstellung von Naturstoffen. Es konnte ein 45 kb großes Gencluster erfolgreich kloniert und zwei neue Peptide Ambactin und Xenolindicin aus Xenorhabdus charakterisieren werden, wobei letztgenanntes von einem stillen Gencluster stammt. ExRec stellt eine sehr effiziente und wichtige Methode für die Klonierung großer Gencluster als auch für die Klonierung aus Metagenombibliotheken und RNA Pools dar...