Refine
Year of publication
Document Type
- Article (586)
- Doctoral Thesis (139)
- Book (25)
- Contribution to a Periodical (21)
- Conference Proceeding (19)
- Working Paper (19)
- Part of Periodical (10)
- diplomthesis (8)
- Diploma Thesis (7)
- Part of a Book (5)
Is part of the Bibliography
- no (864)
Keywords
- climate change (13)
- Climate change (5)
- Geochemistry (5)
- Klimaänderung (5)
- Atmospheric chemistry (4)
- Boden (4)
- Deutschland (4)
- Klima (4)
- Modellierung (4)
- Stratosphäre (4)
Institute
- Geowissenschaften (864) (remove)
WaterGAP (Water - Global Assessment and Prognosis) is a tool for modeling global water use and water availability. It participates among other models in the ISIMIP initiative (The Inter-Sectoral Impact Model Intercomparison Project). As part of this initiative, the water temperature should be calculated by participating hydrological models because it plays a vital role in many chemical, physical and biological processes. Therefore, the subject of this master thesis is to implement the physically based surface water temperature computation after VAN BEEK ET AL. (2012) and WANDERS ET AL. (2019) into WaterGAP and compare the results to the statistical regression approach by PUNZET ET AL. (2012). The computation is validated with observed water temperature data obtained from the GEMStat water quality database. The results are good for arctic and temperate latitudes. Surface water temperatures for tropical rivers are overestimated, most likely due to the overestimation of precipitation temperatures, incoming radiation and groundwater temperatures. The comparison with the regression model by PUNZET ET AL. (2012) shows matching results. The regression model even matches with WaterGAP results for most of the simulations of the future under climate change conditions, where the regression model should stop working due to changing environmental parameters. Several assumptions had to be made in order to implement the water temperature calculation in Water-GAP. These include, e.g., discharge temperatures for power plant cooling water, precipitation and surface runoff temperatures. For model improvements, perhaps three different values for the different regions of the world should be used to cool down the precipitation and surface runoff. The model could also be improved by refining the ice formation calculation, especially for the conditions when the ice melts, breaks up and is transported downstream. Furthermore, the feedback to the river channel roughness could be implemented if ice has formed. The WaterGAP model upgraded with the water temperature calculation will help the ISIMIP initiative in the future.
Floodplains play an important role in the terrestrial water cycle and are very important for biodiversity. Therefore, an improved representation of the dynamics of floodplain water flows and storage in global hydrological and land surface models is required. To support model validation, we combined monthly time series of satellite-derived inundation areas (Papa et al., 2010) with data on irrigated rice areas (Portmann et al., 2010). In this way, we obtained global-scale time series of naturally inundated areas (NIA), with monthly values of inundation extent during 1993–2004 and a spatial resolution of 0.5°. For most grid cells (0.5°×0.5°), the mean annual maximum of NIA agrees well with the static open water extent of the Global Lakes and Wetlands database (GLWD) (Lehner and Döll, 2004), but in 16% of the cells NIA is larger than GLWD. In some regions, like Northwestern Europe, NIA clearly overestimates inundated areas, probably because of confounding very wet soils with inundated areas. In other areas, such as South Asia, it is likely that NIA can help to enhance GLWD. NIA data will be very useful for developing and validating a floodplain modeling algorithm for the global hydrological model WGHM. For example, we found that monthly NIAs correlate with observed river discharges.
In Belize, which is well known for the Belize Barrier Reef and its offshore atolls, coastal lagoons are frequent morphological features along the coast. They represent transitional environments between siliciclastic and carbonate settings. In order to shed light into the Holocene evolution of coastal lagoon environments, five localities along the central coast of Belize were selected as coring sites. These include four coastal lagoons and one marsh area, namely Mantatee Lagoon, Mullins River Beach, Colson Point Lagoon, Commerce Bight Lagoon and Sapodilla Lagoon. A total of 26 sediment cores with core lengths ranging from 109 cm to 500 cm, were drilled using a Lanesky-vibracorer. Overall, 73 m of Holocene sediments and Pleistocene soil were recovered. Together with 58 radiocarbon dates the sediments reveal details on the sediment architecture and depositional features of the localities.
Marine inundation of the mainland and coastal lagoon formation started around 6 kyrs cal BP.
As a response to sea-level rise during the Holocene transgression, facies retrograded towards the coast, as seen in marginal marine overlying brackish mollusk faunas. Evidence for late Holocene progradation of facies due to sea-level stagnation is largely lacking. The occurrence of landward thinning sand beds, hiatuses and marine fauna in lagoonal successions are indications of event (overwash) sedimentation. Sediments recovered are largely of Holocene age (<7980 cal BP), overlying Pleistocene sections. Analyses of sediment composition and texture, radiocarbon dating and mollusk shell identification were used to describe and correlate sedimentary facies.
XRD analyses have identified quartz as the dominant mineral, with the Maya Mountains as main source of coastal lagoon sediments. The most common sedimentary facies include peat and peaty sediment, mud, sand, and poorly sorted sediments. Pleistocene soil forms the basement of Holocene sediments. Holocene mud represents lagoon background permanent sedimentation.
Peats and peat-rich sequences were deposited in mangrove swamp environments, whereas sandy facies mainly occur in the shoreface, beach, barriers, bars, barrier spits and overwash deposits. Facies successions could be identified for each locality, but it has proven difficult to correlate the stratigraphic sequences, especially among localities. These differences among the five locations studied suggest that apart from regional influence such as sea-level rise, local environmental factors such as small-scale variation in geomorphology and resulting facies heterogeneity, connectivity of the lagoon with the sea, antecedent topography and river discharge, were responsible for coastal sedimentation and lagoon development in the Holocene of Belize.
Faunal composition and distribution patterns of mollusk assemblages from 20 shell concentrations in cores collected in coastal lagoons, a mangrove-fringed tidal inlet and the marginal marine area (shallow subtidal) show considerable variation due to environmental heterogeneity and the interplay of several environmental factors in the course of the mid-late Holocene (ca. 6000 cal BP to modern). The investigated fauna ≥2 mm comprises 2246 bivalve, gastropod and 11 scaphopod specimens. Fifty-three mollusk species, belonging to 42 families, were identified. The bivalve Anomalocardia cuneimeris and cerithid gastropods are the dominant species and account for 78% of the total fauna. Diversity indices are low in concentrations from lagoons and relatively high in the marginal marine and tidal inlet areas.
Based on cluster analysis and nonmetric multidimensional scaling (NMDS), seven lagoonal assemblages and three marginal marine/tidal inlet assemblages were defined. A separation between lagoonal and marginal marine/tidal inlet assemblages seen in ordination indicates a lagoon-onshore gradient. The statistical separation among lagoonal assemblages demonstrates environmental changes during the Holocene evolution of the coastal lagoons, which is probably related to the formation of barriers and spits. The controlling factors of species distribution patterns are difficult to figure out, probably due to the heterogeneity of the barrier-lagoon systems and the interaction of paleoecological and paleoenvironmental factors. In addition to the taxonomic analysis, a taphonomic analysis of 1827 valves of A. cuneimeris from coastal lagoons was carried out. There is no relationship between depth and age of shells and their taphonomic condition. Size-frequency distributions and right-left valve ratios of A. cuneimeris suggest that valves were not transported over long distances but were deposited parautochthonously in their original habitat. Shells from tidal inlet and marginal marine environments were also predominantly deposited in their original habitats.
Since the Belize coast was repeatedly affected by hurricanes and the paleohurricane record for this region is poor, the sediment cores have been examined in order to identify storm deposits.
The paleohurricane record presented in this study spans the past 8000 years and exhibits three periods with increased evidences of hurricane strikes occurring at 6000-4900 cal yr BP, 4200-3600 cal yr BP and 2200-1500 cal yr BP. Two earlier events around 7100 and 7900 cal yr BP and more recent events around 180 cal yr BP and during modern times have been detected. Sand layers, redeposited corals and lagoon shell concentrations have been used as proxies for storm deposition. Additionally, hiatuses and reversed ages may indicate storm influence. While sand layers and corals represent overwash deposits, the lagoon shell concentrations, which mainly comprise the bivalve Anomalocardia cuneimeris and cerithid gastropods, have been deposited due to changes in lagoon salinity during and after storm landfalls. Comparison with other studies reveals similarities with one record from Belize, but hardly any matches with other published records. The potential for paleotempestology reconstructions of the barrier-lagoon complexes along the central Belize coast differs depending on geomorphology, and deposition of washovers in the lagoon basins is limited, probably due to the interplay of biological, geological and geomorphological processes.
Geoelektrische Methoden sind weit verbreitet und werden häufig zur Erkundung des oberflächennahen Untergrundes eingesetzt. Angewendet werden standardmäßig meist nur linienhafte Anordnungen der Sender- und Empfängerelektroden, die nur wenige Zehner Meter lang sind. Hierdurch haben diese Methoden nur geringe Eindringtiefen. Um größere Eindringtiefen und 3-dimensionale Informationen über den Untergrund zu erhalten, sind in der vorgestellten Studie die Empfänger- und Senderdipole in mehr oder weniger regelmäßigen Abständen über das Untersuchungsgebiet verteilt worden. Mit jeder Empfängerstation sind kontinuierlich die elektrischen Spannungen in bis zu drei Richtungen aufgezeichnet worden. Für die Einspeisungen wurde ein Rechtecksignal verwendet, das sich gut von den Störfrequenzen und den natürlichen Spannungen abhebt. Die Richtungen der Einspeisedipole sind entsprechend den örtlichen Gegebenheiten, jedoch möglichst parallel zu den Messrichtungen, gewählt worden. Zur Auswertung der erhobenen Messdaten wurde ein Programmpaket entwickelt, das eine weitestgehend automatisierte Auswertung der Daten erlaubt. Die Bestimmung der scheinbaren spezifischen Widerstände und ihrer Messfehler wurde an den fouriertransformierten Datenzeitreihen durchgeführt. Hierdurch konnten Störeinflüsse minimiert werden und es wurde möglich selbst stark verrauschte Datensätze auszuwerten. Um die erhobenen Daten interpretieren zu können sind die berechneten scheinbaren spezifischen Widerstände als Grundlage für Inversionen und Modellstudien verwendet worden. Die oben beschriebene Methode wurde im Rahmen der vorliegenden Arbeit in zwei unterschiedlichen Messgebieten angewandt.
Messgebiet im Hohen Vogelsberg
Im Juli 2007 wurde damit begonnen, die Forschungsbohrung Sichenhausen-Eschwald im Hohen Vogelsberg abzuteufen. Ziel war es, Informationen über den strukturellen Aufbau des größten geschlossenen Vulkankomplexes Mitteleuropas zu gewinnen. Die Gesteinsansprache der Tiefbohrung lieferte bereits relativ früh Hinweise darauf, dass ein großer magmatischer Körper aufgeschlossen wurde.Aufgrund der begrenzten räumlichen Aussagekraft der Bohrung und fehlender Geländebefunde war es nicht möglich, den Mechanismus der Platznahme und die Größe des Körpers näher zu beschreiben. Die Kampagne hatte das Ziel diese Lücke zu schließen und ein 3-dimensionales Modell des Untergrundes zu erstellen.In dem annähernd quadratischen Untersuchungsgebiet, das eine Fläche von ca. 25 $km²$ aufweist, wurden 20 Datenlogger zur Aufzeichnung der elektrischen Spannungen aufgebaut. Die Empfängerdipole waren zwischen 20 m und 30 m lang. Insgesamt wurden 36 Stromeinspeisungen mit Stromstärken zwischen 28 A und 40 A an 16 unterschiedlichen Positionen für jeweils 2 bis 3 verschiedene Dipolrichtungen vorgenommen. Die Einspeisedipole waren zwischen 100 m und 300 m lang. Insgesamt konnten 1.439 scheinbare spezifische Widerstände berechnet werden.Die Ergebnisse der Modellierungen und der Inversion der Daten zeigen, dass mit der Forschungsbohrung ein domartiger Körper angebohrt wurde. Anhand der Ergebnisse kann die räumliche Ausdehnung des Körpers eingegrenzt und ein vorher noch nicht kartierter Gang nachgewiesen werden.
Messgebiet im Bereich der Kinzigtalsperre
Das etwa Ost-West verlaufende Kinzigtal bildet die naturräumliche und geologische Grenze zwischen dem vulkanischen Vogelsberg im Norden und dem, in diesem Bereich aus Sedimentgesteinen aufgebauten, Spessart im Süden.Die zwischen Steinau a. d. Str. und Bad Soden-Salmünster befindliche Kinzigtalsperre dient dem Hochwasserschutz und der Regulierung des Pegels der Kinzig bei Dürreperioden. Der aufgestaute See ist relativ flach und weist im Normalstau maximale Tiefen von ca. 6~m auf. Der Stausee ist jedoch über weite Teile etwa 4~m tief. In dieser Kampagne betrug der Abstand zwischen den einzelnen Empfängerstationen etwa 100 m bis 300 m. Es wurde aufgrund der beengten Platzverhältnisse eine Dipollänge von ca. 48 m für die Einspeise- und die Empfängerdipole im Messgebiet gewählt. Insgesamt wurden 14 Empfängerstationen im Messgebiet aufgebaut, von denen sich Neun auf dem Seegrund befanden. Das Messraster orientierte sich am vermuteten Verlauf der Kinzigtalstörung. An 8 Positionen sind in 21 Richtungen elektrische Ströme mit Stärken zwischen 2,2 A und 40 A in den Untergrund eingespeist worden. Es konnten 536 scheinbare spezifische Widerstände berechnet werden. Ziel war es, den Verlauf der Störung näher zu bestimmen und die Tiefe der im Untergrund vorhandenen salinären Grundwässer zu bestimmen. Die Bestimmung des Verlaufs der Kinzigtalstörung sowie die Tiefenbestimmung der salinären Grundwässer war mit den erhobenen Daten jedoch nicht möglich.
Spatial interpolation of rain gauge data is important in forcing of hydrological simulations or evaluation of weather predictions, for example. The spatial density of available data sites is often changing with time. This paper investigates the application of statistical distance, like one minus common variance of time series, between data sites instead of geographical distance in interpolation. Here, as a typical representative of interpolation methods the inverse distance weighting interpolation is applied and the test data is daily precipitation observed in Austria. Choosing statistical distance instead of geographical distance in interpolation of an actually available coarse observation network yields more robust interpolation results at sites of a denser network with actually lacking observations. The performance enhancement is in or close to mountainous terrain. This has the potential to parsimoniously densify the currently available observation network. Additionally, the success further motivates search for conceptual rain-orography interaction models as components of spatial rain interpolation algorithms in mountainous terrain.
Spatial interpolation of rain gauge data is important in forcing of hydrological simulations or evaluation of weather predictions, for example. This paper investigates the application of statistical distance, like one minus common variance of observation time series, between data sites instead of geographical distance in interpolation. Here, as a typical representative of interpolation methods the inverse distance weighting interpolation is applied and the test data is daily precipitation observed in Austria. Choosing statistical distance instead of geographical distance in interpolation of available coarse network observations to sites of a denser network, which is not reporting for the interpolation date, yields more robust interpolation results. The most distinct performance enhancement is in or close to mountainous terrain. Therefore, application of statistical distance in the inverse distance weighting interpolation or in similar methods can parsimoniously densify the currently available observation network. Additionally, the success further motivates search for conceptual rain-orography interaction models as components of spatial rain interpolation algorithms in mountainous terrain.
Spatial interpolation of precipitation data is uncertain. How important is this uncertainty and how can it be considered in evaluation of high-resolution probabilistic precipitation forecasts? These questions are discussed by experimental evaluation of the COSMO consortium's limited-area ensemble prediction system COSMO-LEPS. The applied performance measure is the often used Brier skill score (BSS). The observational references in the evaluation are (a) analyzed rain gauge data by ordinary Kriging and (b) ensembles of interpolated rain gauge data by stochastic simulation. This permits the consideration of either a deterministic reference (the event is observed or not with 100% certainty) or a probabilistic reference that makes allowance for uncertainties in spatial averaging. The evaluation experiments show that the evaluation uncertainties are substantial even for the large area (41 300 km2) of Switzerland with a mean rain gauge distance as good as 7 km: the one- to three-day precipitation forecasts have skill decreasing with forecast lead time but the one- and two-day forecast performances differ not significantly.
So-called medicanes (Mediterranean hurricanes) are meso-scale, marine, and warm-core Mediterranean cyclones that exhibit some similarities to tropical cyclones. The strong cyclonic winds associated with medicanes threaten the highly populated coastal areas around the Mediterranean basin. To reduce the risk of casualties and overall negative impacts, it is important to improve the understanding of medicanes with the use of numerical models. In this study, we employ an atmospheric limited-area model (COSMO-CLM) coupled with a one-dimensional ocean model (1-D NEMO-MED12) to simulate medicanes. The aim of this study is to assess the robustness of the coupled model in simulating these extreme events. For this purpose, 11 historical medicane events are simulated using the atmosphere-only model, COSMO-CLM, and coupled model, with different setups (horizontal atmospheric grid-spacings of 0.44°, 0.22°, and 0.08°; with/without spectral nudging, and an ocean grid-spacing of 1/12°). The results show that at high-resolution, the coupled model is able to not only simulate most of medicane events but also improve the track length, core temperature, and wind speed of simulated medicanes compared to the atmosphere-only simulations. The results suggest that the coupled model is more proficient for systemic and detailed studies of historical medicane events, and that this model can be an effective tool for future projections.
Nucleation of aerosol particles from trace atmospheric vapours is thought to provide up to half of global cloud condensation nuclei. Aerosols can cause a net cooling of climate by scattering sunlight and by leading to smaller but more numerous cloud droplets, which makes clouds brighter and extends their lifetimes. Atmospheric aerosols derived from human activities are thought to have compensated for a large fraction of the warming caused by greenhouse gases. However, despite its importance for climate, atmospheric nucleation is poorly understood. Recently, it has been shown that sulphuric acid and ammonia cannot explain particle formation rates observed in the lower atmosphere. It is thought that amines may enhance nucleation, but until now there has been no direct evidence for amine ternary nucleation under atmospheric conditions. Here we use the CLOUD (Cosmics Leaving Outdoor Droplets) chamber at CERN and find that dimethylamine above three parts per trillion by volume can enhance particle formation rates more than 1,000-fold compared with ammonia, sufficient to account for the particle formation rates observed in the atmosphere. Molecular analysis of the clusters reveals that the faster nucleation is explained by a base-stabilization mechanism involving acid–amine pairs, which strongly decrease evaporation. The ion-induced contribution is generally small, reflecting the high stability of sulphuric acid–dimethylamine clusters and indicating that galactic cosmic rays exert only a small influence on their formation, except at low overall formation rates. Our experimental measurements are well reproduced by a dynamical model based on quantum chemical calculations of binding energies of molecular clusters, without any fitted parameters. These results show that, in regions of the atmosphere near amine sources, both amines and sulphur dioxide should be considered when assessing the impact of anthropogenic activities on particle formation.
The Late Cretaceous is known to be mostly affected by warm periods interrupted temporarily by a number of cooling events. The reconstruction of the paleoclimatic conditions during a period of high concentration of CO2 in the atmosphere is of great importance for the creation of future climate models. We applied the recently developed method reconstructing the SST from the TEX86 (TetraEther indeX of tetraethers consisting of 86 carbon atoms).
The sample material used for the present study was obtained from the tropical Late Cretaceous southern Tethys upwelling system (Negev/Israel), lasting from the Late Santonian to the Early Maastrichtian (~ 85 to 68 Ma). On the core samples from the Shefela basin, representing the outer belt of the upwelling system and the outcrop profile from the open mine Mishor Rotem (Efe Syncline), representing the inner belt, various bulk geochemical and biomarker studies were performed in this thesis.
Derived from TEX86 data, a significant long-term SST cooling trend from 36.0 to 29.3 °C is recognized during the Late Santonian and the Early Campanian in the southern Tethys margin. This is consistent with the opening and deepening of the Equatorial Atlantic Gateway (EAG) and the intrusion of cooler deep water from the southern Atlantic Ocean influencing the global SSTs and also the Tethys Ocean. Furthermore, the cooler near shore SST usually found in modern upwelling systems could be verified in case of the ancient upwelling system investigated in the present study. The calculated mean SST in the inner belt (27.7 °C) represented in the Efe Syncline was 1.5 °C cooler in comparison to the more seaward located outer belt (Shefela basin).
Moreover, geochemical and biomarker analyses were used to identify both the accumulation of high amounts of phosphate in the PM and good preservation of organic matter (OM) in the lower part of the OSM section. Total organic carbon (TOC) contents are highly variable over the whole profile reaching from 0.6 % in the MM, to 24.5 % in the OSM. Total iron (TFe) varies from 0.1 % in the PM to 3.3 % in the OSM and total sulfur (TS) varies between 0.1 % in the MM and 3.4 % in the OSM. Different correlations of TS, TOC and TFe were used to identify the conditions during the deposition of the different facies types. Natural sulfurization was found to play a key role in the preservation of the OM particularly in the lower part of the OSM. Samples from the OSM and the PM were deposited under dysoxic to anoxic conditions and iron limitation lasted during the deposition of the OSM and the PM, which effected the incorporation of sulfur into OM.
Phosphorus is highly accumulated in the sediments of the PM with a mean proportion of 11.5 % total phosphorus (TP), which is drastically reduced to a mean value of 0.9 % in the OSM and the MM. From the correlation of the bulk geochemical parameters TOC/TOCOR ratio and TP a major contribution of sulfate reducing bacteria to the phosphate deposition is concluded. This interrelation has previously been investigated in recent coastal upwelling systems off Peru, Chile, California and Namibia. This was further supported by the analysis of branched and monounsaturated fatty acids indicating the occurrence of sulfate reducing and sulfide oxidizing bacteria during the deposition.
According to the results from the analysis of n-alkanes and C27- to C29-steranes up to 95 % of the OM was of marine origin.
Organic sulfur compounds (OSC) were a major compound class in the aromatic hydrocarbon fraction and n-Alkyl and isoprenoid thiophenes were the most abundant, with highest amounts found for 2-methyl-5-tridecyl-thiophene (28 µg/g TOC). The relatively high abundance of ββ-C35 hopanoid thiophenes and epithiosteranes is equivalent to an incorporation of sulfur during the early stages of diagenesis.
Moreover, the geochemical parameters δ13Corg, δ15Norg, C/N and the pristane/phytane (Pr/Ph) ratio, were studied for reconstruction of seafloor and water column depositional environments. The high C/N ratio along with relatively low values of δ15Norg (4 ‰ to 6 ‰) and δ13Corg (-29 ‰ to -28 ‰) are consistent with a significant preferential loss of nitrogen-rich organic compounds during diagenesis. Oxygen-depleted conditions lasted during the deposition of the PM and the bottom of the OSM, reflected by the low Pr/Ph ratio of 0.11–0.7. In the upper part of the OSM and the MM the conditions changed from anoxic to dysoxic or oxic conditions. This environmental trend is consistent with co-occurring foraminiferal assemblages in the studied succession and implies that the benthic species in the Negev sequence were adapted to persistent minimum oxygen conditions by performing complete denitrification as recently found in many modern benthic foraminifera.
Furthermore, the anammox process could have influenced the nitrogen composition of the sediments. In this anaerobically process nitrite and ammonia are converted to molecular nitrogen.
This thesis aims to analyse in a first step the physical and chemical properties of soil profiles along pedomorphological transects in different land used conditions (protected, partly protected as well as cultivated and pastured areas) in North West Benin and in South East Burkina Faso. The information about soils, which are carried out in consideration of the pedogenesis processes like weathering types, saprolitisation, formation of laterite crusts and denudation within the planation surfaces are therefore correlated in a second step with the structure and dynamic of woody plant around individual soil profiles. The relationship soil properties and woody plant is investigated in order to assess the reciprocal influence between the diversity of woody plants and soil characteristics within a small scale study and under different land use conditions.
A common vertical and lateral differentiation of physical and chemical properties regardless of the partly protected, protected and cultivated status of the sites can be noticed. Thus, in the cultivated site of Kikideni and in the partly protected zone of Natiabouani (South East Burkina Faso) sandy loam and sandy clay loam soil surfaces are widespread because of the occurrence of similar erosion processes like sheet wash, rill and gully erosion while in the central part of the Pendjari National Park loamy soil textures are prevailing. In fact, the steepness of the relief and the length of the slopes in the Pendjari Park seem to limit the development of some erosion forms as gully. Furthermore, the classification of soils reflects the variation of pedological processes along the transects and thus the occurrence of different soil types. The status of the sites may play an insignificant role in the differentiation of soil properties within the scale of small pedomorphological transects. A direct comparison of the vegetation type in the land use respectively partly protected and in the total protected sites (National Park of Pendjari) reveals a transition from the shrub savanna to the tree savanna. In conclusion it is important to insist on the fact that the variations of soil parameters within small slopes and the different sites are more conditioned by varying erosion processes and drainage conditions than the status protected or land use sites while the composition and diversity of plants is influenced by the status of the sites, the prevailing management tools, the pedogenetic conditions as well as the presence of wild animals like elephants. The ordination diagram shows that the organic matter is better correlated to the subgroup representing principally the sites of the hunting zone of the Pendjari Park and might be an explaining factor to the distribution of these sample sites groups. CEC ratios in the partly protected site of Natiabouani represent the highest measured in all sites. Nevertheless, statistical analysis of the CCA (canonical correspondence analysis) indicates generally a low correlation. This tendency is consolidated by the Monte Carlo test (p=0.14) which is a good indicator of species and environmental conditions. The detailed analysis of soil properties and the vegetation dynamic as well as their relationship within small pedomorphological transects represent an important pedological and botanical data collection involving different compartments. This thesis contributes to the better understanding of the savanna landscapes of West Africa and may provide essential scientific background for each development project directed towards interdisciplinary and integrative researches.
Teleconnections of the Quasi-Biennial Oscillation in a multi-model ensemble of QBO-resolving models
(2021)
The Quasi-biennial Oscillation (QBO) dominates the interannual variability of the tropical stratosphere and influences other regions of the atmosphere. The high predictability of the QBO implies that its teleconnections could lead to increased skill of seasonal and decadal forecasts provided the relevant mechanisms are accurately represented in models. Here modelling and sampling uncertainties of QBO teleconnections are examined using a multi-model ensemble of QBO-resolving atmospheric general circulation models that have carried out a set of coordinated experiments as part of the Stratosphere-troposphere Processes And their Role in Climate (SPARC) QBO initiative (QBOi). During Northern Hemisphere winter, the stratospheric polar vortex in most of these models strengthens when the QBO near 50 hPa is westerly and weakens when it is easterly, consistent with, but weaker than, the observed response. These weak responses are likely due to model errors, such as systematically weak QBO amplitudes near 50 hPa, affecting the teleconnection. The teleconnection to the North Atlantic Oscillation is less well captured overall, but of similar strength to the observed signal in the few models that do show it. The models do not show clear evidence of a QBO teleconnection to the Northern Hemisphere Pacific-sector subtropical jet.
Towards the goal to understand the role of land-surface processes over the Indian sub-continent, a series of soil-moisture sensitivity simulations have been performed using a non-hydrostatic regional climate model COSMO-CLM. The experiments were driven by the lateral boundary conditions provided by the ERA-Interim (ECMWF) reanalysis. The simulation results show that the pre-monsoonal soil moisture has a significant influence on the monsoonal precipitation. Both, positive and negative soil-moisture precipitation (S-P) feedback processes are of importance. The negative S-P feedback process is especially influential in the western and the northern parts of India.
Abstract
The mineralogy, chemical composition, and physical properties of cratonic mantle eclogites with oceanic crustal protoliths can be modified by secondary processes involving interaction with fluids and melts, generated in various slab lithologies upon subduction (auto‐metasomatism) or mantle metasomatism after emplacement into the cratonic lithosphere. Here we combine new and published data to isolate these signatures and evaluate their effects on the chemical and physical properties of eclogite. Mantle metasomatism involving kimberlite‐like, ultramafic carbonated melts (UM carbonated melts) is ubiquitous though not pervasive, and affected between ~20% and 40% of the eclogite population at the various localities investigated here, predominantly at ~60–150 km depth, overlapping cratonic midlithospheric seismic discontinuities. Its hallmarks include lower jadeite component in clinopyroxene and grossular component in garnet, an increase in bulk‐rock MgO ± SiO2, and decrease in FeO and Al2O3 contents, and LREE‐enrichment accompanied by higher Sr, Pb, Th, U, and in part Zr and Nb, as well as lower Li, Cu ± Zn. This is mediated by addition of a high‐temperature pyroxene from a UM carbonated melt, followed by redistribution of this component into garnet and clinopyroxene. As clinopyroxene‐garnet trace‐element distribution coefficients increase with decreasing garnet grossular component, clinopyroxene is the main carrier of the metasomatic signatures. UM carbonated melt‐metasomatism at >130–150 km has destroyed the diamond inventory at some localities. These mineralogical and chemical changes contribute to low densities, with implications for eclogite gravitational stability, but negligible changes in shear‐wave velocities, and, if accompanied by H2O‐enrichment, will enhance electrical conductivities compared to unenriched eclogites.
Plain Language Summary
Oceanic crust formed at spreading ridges is recycled in subduction zones and undergoes metamorphism to eclogite. Some of this material is captured in the overlying lithospheric mantle, where it is exhumed by passing magmas. Having formed in spreading ridges, these eclogites have proven invaluable archives for the onset of plate tectonics, for the construction of cratons during subduction/collision, as probes of the convecting mantle from which their precursors formed, and as generators of heterogeneity upon recycling into Earth's convecting mantle. During subduction and until exhumation, interaction with fluids and melts (called metasomatism) can change the mineralogy, chemical composition, and physical properties of mantle eclogites, complicating their interpretation, but a comprehensive study of these effects is lacking so far. We investigated mantle eclogites from ancient continents (cratons) around the globe in order to define hallmarks of metasomatism by subduction‐related fluids and small‐volume ultramafic carbonated mantle melts. We find that the latter is pervasive and occurs predominantly at midlithospheric depths where seismic discontinuities are detected, typically causing diamond destruction and a reduction in density. This has consequences for their gravitational stability and for the interpretation of shearwave velocities in cratons.
Chemical reduction-oxidation mechanisms within mantle rocks link to the terrestrial carbon cycle by influencing the depth at which magmas can form, their composition, and ultimately the chemistry of gases released into the atmosphere. The oxidation state of the uppermost mantle has been widely accepted to be unchanged over the past 3800 m.y., based on the abundance of redox-sensitive elements in greenstone belt–associated samples of different ages. However, the redox signal in those rocks may have been obscured by their complex origins and emplacement on continental margins. In contrast, the source and processes occurring during decompression melting at spreading ridges are relatively well constrained. We retrieve primary redox conditions from metamorphosed mid-oceanic ridge basalts (MORBs) and picrites of various ages (ca. 3000–550 Ma), using V/Sc as a broad redox proxy. Average V/Sc values for Proterozoic suites (7.0 ± 1.4, 2σ, n = 6) are similar to those of modern MORB (6.8 ± 1.6), whereas Archean suites have lower V/Sc (5.2 ± 0.4, n = 5). The lower Archean V/Sc is interpreted to reflect both deeper melt extraction from the uppermost mantle, which becomes more reduced with depth, and an intrinsically lower redox state. The pressure-corrected oxygen fugacity (expressed relative to the fayalite-magnetite-quartz buffer, ΔFMQ, at 1 GPa) of Archean sample suites (ΔFMQ –1.19 ± 0.33, 2σ) is significantly lower than that of post-Archean sample suites, including MORB (ΔFMQ –0.26 ± 0.44). Our results imply that the reducing Archean atmosphere was in equilibrium with Earth’s mantle, and further suggest that magmatic gases crossed the threshold that allowed a build-up in atmospheric O2 levels ca. 3000 Ma, accompanied by the first “whiffs” of oxygen in sediments of that age.
In vorliegender Studie wurde lebend und tot gesammeltes Schalenmaterial der Europäischen Flussperlmuschel Margaritifera margaritifera verschiedener Lokalitäten in Schweden, Finnland und Deutschland (bzw. Frankreich) sklerochronologisch und isotopengeochemisch untersucht. Sauerstoffisotopen-Zeitreihen, trendbereinigte und standardisierte stabile Kohlenstoffisotopen-Zeitreihen (SSCI) sowie jährliche Zuwachsraten (SGI-Zeitreihen) jeder der acht Populationen sind zu Compound-Chronologien zusammengefasst und auf Zusammenhänge mit Temperatur, Sonnenflecken-Zyklen und Niederschlag untersucht sowie auf Korrelationen mit verschiedenen Klimaindizes (z.B. dem Dipol der Meeres-Oberflächenwasser Temperatur-Anomalien im Nordatlantik, NADP-SST, und der Nordatlantischen Oszillation, NAO) getestet worden. Im Vergleich ergaben sich für die geglätteten Zeitreihen (25-Jahresfilter) Korrelationskoeffizienten von r = 0,57 (SGI Master-Chronologie und NAO) bzw. r = 0,59 (Master-Chronologie) und NADP-SST. Obwohl weder Isotopendaten noch Zuwachschronologien der Muscheln auf hochfrequenten Signalen hohe Korrelationen mit instrumentellen Messdaten aufweisen, sind dekadische Klimaoszillationen deutlich repräsentiert. Mit zunehmendem Lebensalter nimmt der Schalenzuwachs exponentiell ab. Gleichzeitig nähern sich die d13C-Werte der Schale dem d13CDIC-Wert des Wassers, der bei den hier untersuchten Lokalitäten zwischen -9,3 ‰ und -12,7 ‰ lag. Erst im hohen Lebensalter findet also die Schalenbildung nahezu im kohlenstoffisotopischen Gleichgewicht mit dem umgebenden Medium statt. In der Jugend der Tiere hingegen wirken sich lokalitätsspezifische Trends aus. Extrinsische Faktoren führen zu drei Mustern: 1) Trends hin zu stärker negativen d13C-Werten (um etwa -4,5 ‰) in den Bächen Nuortejaurbäcken (NJB) und Grundträsktjärnbäcken (GTB), 2) Trends hin zu weniger stark negativen d13C-Werten (um etwa +4,5 ‰) in den großen Flüssen (GJ: Görjeån, NWS: Tarn/Frankreich) und 3) Schwankungen um etwa ±1,5 ‰ um einen Mittelwert (RG: Regnitz). Der Einfluss auf die d13C-Trends könnte möglicherweise in Veränderungen der Bioproduktivität begründet sein, da sich diese unmittelbar auf den DIC-Pool des umgebenden Milieus und des Habitats auswirkt. In den Sauerstoffisotopen spiegelte sich die geographische Herkunft des untersuchten Materials wider. Die Chronologien der am nördlichsten gelegenen Populationen wiesen d18OMittelwerte von -11,5 ‰ (GJ), bzw. -9,5 ‰ (NJB, GTB) auf, die RG-Chronologie von -7,9 ‰ und die Zeitreihe der NWS von -5,3 ‰. Im Gegensatz zu anderen Arbeiten zeigten die untersuchten Individuen jedoch keinen statistischen Zusammenhang mit annuellen Temperaturdaten. Als beeinflussende Faktoren kommen die Schneeschmelze und die isotopengeochemische Ausprägung des Habitats (See, Fluss, Bach) in Frage. Eine sehr hohe Korrelation von r = -0,74 (25-Jahresfilter) wurde zwischen der Görjeån-Chronologie (d18OAragonit) und Niederschlagsraten für das in der Nähe des Flusses gelegene Jokkmokk festgestellt.
The Alborz Mountains are forming a ~100 km wide, E-W trending mountain chain where individual summits are up to 5000 m in elevation. The Alborz Mountains range are part of the Alpine orogen and are straddling a 2000 km wide area S of the Caspian Sea. The rocks of the Alborz Mountains consist of Neogen sediments, which are affected by folding and faulting. In the western part of the Alborz Mountains the folds and faults are trending NW-SE, whereas in the eastern part they are trending NE-SW. GPS data confirm N-S shortening including dextral strike-slip along ESE-WNW trending faults, and sinistral strike-slip along ENE-WSW trending faults. The present thesis is focusing on the active Garmsar salt nappe, the fragmented roof of which is pierced by rock salt which extruded near the front of the Alborz Mountains Range. During the past 5 m.y. the front of the Alborz chain migrated towards SSW on top of the salt of the Garmsar basin. The salt was squeezed towards SSW and took place at the Great Kavir. The extruded salt is forming the Eyvanekey plateau between the cities of Eyvanekey and Garmsar. Both the Garmsar salt nappe and the Eyvanekey plateau are dextrally displaced for ca. 9 km along the Zirab-Garmsar fault. Structural analyses of the Garmsar salt nappe indicate three different groups of joints which are trending perpendicular and parallel to the local mechanical anisotropy. The folds of the study area are congruent (type 2 and 3 after Ramsay) resulting from viscose inhomogeneous flow. InSAR-Investigations suggest the Alborz Mountains to be lifted up by ca. 1 cm/a, while horizontal shortening is active at a rate of 8 ±2 mm/a. These values are consistent with GPS data. Based on nine „Advanced Synthetic Aperture Radar“ (ASAR) scenarios, produced by the ENVISAT satellite of the European space agency between 2003 and 2006, we used interferograms to map the displacement via 22 increments during 2 – 18 months. The results suggest that the topographic height of the surface of the salt is changing at a rate which is controlled by the season. The displacement ranges from subsidence at -40 to -50 mm/a to uplift of 20 mm/a. In order to investigate the time-dependent deformation with high spatial resolution, we used algorithms which are based on data of small base lines (SBAS). The resulting interferometric SAR time series analyses also suggest that the study area is largely subsiding at a rate that is controlled by the seasons. The map with the averaged LOS deformation velocities, on the other hand, suggests the subsidence to increase from the upper part of the salt nappe towards deeper topographic 5 levels of the agricultural lowlands. The major part of subsidence is probably caused by the annual rainfall which results in subrosion of salt. The spatial changes in the subsidence rate are probably controlled by the distribution of fountains, mining activity at the margin of the salt glacier, and faults and fractures inside the salt. Striking seasonal imprints are obvious along the agricultural areas which are surrounding the Garmsar salt nappe. These areas are rapidly subsiding in summer and spring when groundwater is used for irrigations. The maximum rate of subsidence (40-50 mm/a) is located E and W of the Eyvanekey plateau, where large areas are irrigated. The maximum displacement is 20 mm/a in the farmland and 5 mm/a in the center of the salt nappe. Depth estimates using Euler deconvolution method for gravimetric and magnetic data suggest the salt to extrude from a depth less than ca. 2000 m. The gravity field of the study area is characterized by strong anomalies in the SW and weak anomalies in the NE. A considerable negative anomaly in the N indicates that the northern part subsided, whereas the southern part was lifted up. The seismic data show three major horizons inside the Miocene sediments: the Lower Red Formation, the Qom Formation, and the Upper Red Formation. The western part of the study area seems to be free from salt domes. The layers of the upper part of the Qom Formation show thinning along the NE and NW trending faults. In some areas the seismic reflectors indicate steep faults close the saddle of the folds. NE-SW-, NW-SE and E-Wtrending faults prevail. Analogue experiments have been carried out to extend our knowledge about the evolution of the Garmsar salt dome. We used a scaled model (34 cm * 25 cm * 2.5 cm) that was shortened perpendicular to its long side. The wedge shape of the Alborz Mountains was simulated by a wedge consisting of Styrofoam. Rock salt was simulated using Polydimethylsiloxan (PDMS), a linear viscous material with a viscosity of 2.3*104 Pa s and a density of 0.96 g/cm3 at room temperature. Other sediments were modeled using dry quartz sand. The experimental results can be used to simulate the structural evolution of the study area: The Alborz deformation front was emplaced on top of the salt rocks in the Garmsar area while migrating towards SSW. A salt basin and a salt extrusion have also been produced in the model. Cross sections through the wedge shaped analogue model indicate N- and S-dipping reverse faults, which are in line with the wedge shape of the Alborz chain. Moreover, ENE-WSW trending sinistral and ESE-WNW trending dextral strike-slip faults led to N-S shortening during the Miocene. Structural marker horizons, 6 which have been turned into Z-folds on the western fold limbs and to S-folds on the eastern fold limbs, are comparable with the folds of the study area. Solving the problem of waste is one of the central tasks of environmental protection. It is becoming increasingly difficult to find suitable sites that are acceptable to the public. Salt and salt formations have relevant properties to be utilizing as a repository for each kind of waste. The favorable properties make rock salt highly suitable as a host rock, in particular for nonradioactive and radioactive wastes. The Qom and Garmsar basins are the nearest salt diapirs to the Tehran province, and there are suitable repositories for waste disposal. Based on surface and subsurface data, the Garmsar salt diapir has been investigated as a case example for its suitability as a host and repository for various types of waste. The data used are based on field studies, interferometry, and geophysical investigations. The results of this study suggest the deep bedded salt of the Garmsar Salt Basin to be an appropriate host for the deposition of industrial waste. Rock salt of surficial layers or domes, on the other hand, is not regarded as an appropriate candidate for waste disposal.
Brachiopod shells are the most widely used geological archive for the reconstruction of the temperature and the oxygen isotope composition of Phanerozoic seawater. However, it is not conclusive whether brachiopods precipitate their shells in thermodynamic equilibrium. In this study, we investigated the potential impact of kinetic controls on the isotope composition of modern brachiopods by measuring the oxygen and clumped isotope compositions of their shells. Our results show that clumped and oxygen isotope compositions depart from thermodynamic equilibrium due to growth rate-induced kinetic effects. These departures are in line with incomplete hydration and hydroxylation of dissolved CO2. These findings imply that the determination of taxon-specific growth rates alongside clumped and bulk oxygen isotope analyses is essential to ensure accurate estimates of past ocean temperatures and seawater oxygen isotope compositions from brachiopods.
Tetra-auricupride, ideally AuCu, represents the only species showing the coexistence of Au with an elevated level of Pt, as in the case of a detrital grain studied structurally for the first time, from an ophiolite-associated placer at Bolshoy Khailyk, western Sayans, Russia. We infer that tetra-auricupride can incorporate as much as ~30 mol. % of a “PtCu” component, apparently without significant modification of the unit cell. The unit-cell parameters of platiniferous tetra-auricupride are: a 2.790(1) Å, c 3.641(4) Å, with c/a = 1.305, which are close to those reported for ordered AuCu(I) in the system Au–Cu, and close also to the cell parameters of tetraferroplatinum (PtFe), which both appear to crystallize in the same space group, P4/mmm. These intermetallic compounds and natural alloys are thus isostructural. The closeness of their structures presumably allows Pt to replace Au atoms so readily. The high extent of Cu + Au enrichment is considered to be a reflection of geochemical evolution and buildup in levels of the incompatible Cu and Au with subordinate Pt in a remaining volume of melt at low levels of fO2 and fS2 in the system.
The oceans at the time of the Cenomanian–Turonian transition were abruptly perturbed by a period of bottom-water anoxia. This led to the brief but widespread deposition of black organic-rich shales, such as the Livello Bonarelli in the Umbria–Marche Basin (Italy). Despite intensive studies, the origin and exact timing of this event are still debated. In this study, we assess leading hypotheses about the inception of oceanic anoxia in the Late Cretaceous greenhouse world by providing a 6 Myr long astronomically tuned timescale across the Cenomanian–Turonian boundary. We procure insights into the relationship between orbital forcing and the Late Cretaceous carbon cycle by deciphering the imprint of astronomical cycles on lithologic, physical properties, and stable isotope records, obtained from the Bottaccione, Contessa and Furlo sections in the Umbria–Marche Basin. The deposition of black shales and cherts, as well as the onset of oceanic anoxia, is related to maxima in the 405 kyr cycle of eccentricity-modulated precession. Correlation to radioisotopic ages from the Western Interior (USA) provides unprecedented age control for the studied Italian successions. The most likely tuned age for the base of the Livello Bonarelli is 94.17 ± 0.15 Ma (tuning 1); however, a 405 kyr older age cannot be excluded (tuning 2) due to uncertainties in stratigraphic correlation, radioisotopic dating, and orbital configuration. Our cyclostratigraphic framework suggests that the exact timing of major carbon cycle perturbations during the Cretaceous may be linked to increased variability in seasonality (i.e. a 405 kyr eccentricity maximum) after the prolonged avoidance of seasonal extremes (i.e. a 2.4 Myr eccentricity minimum). Volcanism is probably the ultimate driver of oceanic anoxia, but orbital periodicities determine the exact timing of carbon cycle perturbations in the Late Cretaceous. This unites two leading hypotheses about the inception of oceanic anoxia in the Late Cretaceous greenhouse world.
The organic rich Livello Bonarelli formed as a result of oxygen deficiency and carbonate dissolution in the oceans during the Cenomanian/Turonian (C/T) transition. During this Ocean Anoxic Event 2 (OAE2), a combination of factors caused increased productivity, incomplete decomposition of organic matter and widespread deposition of black shales. Although these sediments are extensively studied, the exact extent, cause, timing and duration of oceanic anoxia are debated (Sinton and Duncan, 1997; Mitchell et al., 2008). Contrasting causal mechanisms have been suggested, including stratification of the water column (Lanci et al., 2010) versus intensification of the hydrological cycle driving a dynamic ocean circulation (Trabucho-Alexandre et al., 2010). Studies on trace-elemental and (radiogenic) isotope compositions of Cenomanian marine successions have suggested a volcanic origin of OAE2, by delivering nutrients to the semi-enclosed proto-North Atlantic (Zheng et al., 2013, and references therein; Du Vivier et al., 2014). Deciphering the importance of volcanic and oceanographic processes requires tight constraints on their relative timing. Regularly occurring black cherts and shales below the Livello Bonarelli demonstrate that oceanic conditions in the Umbria-Marche Basin were punctuated by episodes of regional anoxia from the mid-Cenomanian onwards. Their hierarchical stacking pattern suggests an orbital control on the deposition of organic rich horizons (Mitchell et al., 2008; Lanci et al., 2010). Stable carbon isotope data reveal that long-term 15 variations in eccentricity paced the carbon cycle (Sprovieri et al., 2013) and sea level changes (Voigt et al., 2006) of the Late Cretaceous. Here we investigate the role of orbital forcing on climate and the carbon cycle, and, specifically, on organic-rich sedimentation prior, during, and after OAE2.
We also explore the potential for establishing an anchored astrochronology for the C/T interval in Europe. Recent improvements in the astronomical solution (La2011; Laskar et al., 2011b) and in the intercalibration of radiometric and astronomical dating techniques (Kuiper et al., 2008; Renne et al., 2013) allow the extension of the astronomical time scale into the Cretaceous. The C/T boundary in the Western Interior (USA) has been dated at 93.90 ± 0.15 Ma by intercalibration of radio-isotopic and astrochronologic time scales (Meyers et al., 2012b). Also, reinterpretation of proxy records spanning the C/T interval seems to resolve discrepancies in reported durations of the OAE2 (Sageman et al., 2006; Meyers et al., 2012a). The well-documented Italian rhythmic successions, reference sections for climatic processes in the Tethyan realm, need to be tied in with the absolute time scale. Biostratigraphic correlation to radioisotopically-dated ash beds in the Western Interior is complicated by the provinciality of faunas and floras. However, δ13C stratigraphy provides a reliable correlation tool (Gale et al., 2005) and we present a new 40Ar/39Ar age for the Thatcher bentonite from the Western Interior occurring within the mid-Cenomanian δ13C event (MCE). This study integrates the well-developed cyclostratigraphy from the Umbria-Marche Basin with radioisotopic ages from the Western Interior and derives a numerical timescale for this critical interval in Earth’s history.
During the Late Cretaceous and early Cenozoic the Earth experienced prolonged climatic cooling most likely caused by decreasing volcanic activity and atmospheric CO2 levels. However, the causes and mechanisms of subsequent major global warming culminating in the late Paleocene to Eocene greenhouse climate remain enigmatic. We present deep and intermediate water Nd-isotope records from the North and South Atlantic to decipher the control of the opening Atlantic Ocean on ocean circulation and its linkages to the evolution of global climate. The marked convergence of Nd-isotope signatures 59 million years ago indicates a major intensification of deep-water exchange between the North and South Atlantic, which coincided with the turning point of deep-water temperatures towards early Paleogene warming. We propose that this intensification of Atlantic overturning circulation in concert with increased atmospheric CO2 from continental rifting marked a climatic tipping point contributing to a more efficient distribution of heat over the planet.
During the 1980s and early 1990s, the importance of small firm growth and industrial districts in Italy became the focus of a large number of regional development studies. According to this literature, successful industrial districts are characterized by intensive cooperation and market producer-user interaction between small and medium-sized, flexibly specialized firms (Piore and Sabel, 1984; Scott, 1988). In addition, specialized local labor markets develop which are complemented by a variety of supportive institutions and a tradition of collaboration based on trust relations (Amin and Robins, 1990; Amin and Thrift, 1995). It has also been emphasized that industrial districts are deeply embedded into the socio-institutional structures within their particular regions (Grabher, 1993). Many case studies have attempted to find evidence that the regional patterns identified in Italy are a reflection of a general trend in industrial development rather than just being historical exceptions. Silicon Valley, which is focused on high technology production, has been identified as being one such production complex similar to those in Italy (see, for instance, Hayter, 1997). However, some remarkable differences do exist in the institutional context of this region, as well as its particular social division of labor (Markusen, 1996). Even though critics, such as Amin and Robins (1990), emphasized quite early that the Italian experience could not easily be applied to other socio-cultural settings, many studies have classified other high technology regions in the U.S. as being industrial districts, such as Boston s Route 128 area. Too much attention has been paid to the performance of small and medium-sized firms and the regional level of industrial production in the ill-fated debate regarding industrial districts (Martinelli and Schoenberger, 1991). Harrison (1997) has provided substantial evidence that large firms continue to dominate the global economy. This does not, however, imply that a de-territorialization of economic growth is necessarily taking place as globalization tendencies continue (Storper, 1997; Maskell and Malmberg, 1998). In the case of Boston, it has been misleading to define its regional economy as being an industrial district. Neither have small and medium-sized firms been decisive in the development of the Route 128 area nor has the region developed a tradition of close communication between vertically-disintegrated firms (Dorfman, 1983; Bathelt, 1991a). Saxenian (1994) found that Boston s economy contrasted sharply with that of an industrial district. Specifically, the region has been dominated by large, vertically-integrated high technology firms which are reliant on proprietary technologies and autarkic firm structures. Several studies have tried to compare the development of the Route 128 region to Silicon Valley. These studies have shown that both regions developed into major 2 agglomerations of high technology industries in the post-World War II period. Due to their different traditions, structures and practices, Silicon Valley and Route 128 have followed divergent development paths which have resulted in a different regional specialization (Dorfman, 1983; Saxenian, 1985; Kenney and von Burg, 1999). In the mid 1970s, both regions were almost equally important in terms of the size of their high technology sectors. Since then, however, Silicon Valley has become more important and has now the largest agglomeration of leading-edge technologies in the U.S. (Saxenian, 1994). Saxenian (1994) argues that the superior performance of high technology industries in Silicon Valley over those in Boston is based on different organizational patterns and manufacturing cultures which are embedded in those socio-institutional traditions which are particular to each region. Despite the fact that Saxenian (1994) has been criticized for basing her conclusions on weak empirical research (i.e. Harrison, 1997; Markusen, 1998), she offers a convincing explanation as to why the development paths of both regions have differed.1 Saxenian s (1994) study does not, however, identify which structures and processes have enabled both regions to overcome economic crises. In the case of the Boston economy, high technology industries have proven that they are capable of readjusting and rejuvenating their product and process structures in such a way that further innovation and growth is stimulated. This is also exemplified by the region s recent economic development. In the late 1980s, Boston experienced an economic decline when the minicomputer industry lost its competitive basis and defense expenditures were drastically reduced. The number of high technology manufacturing jobs decreased by more than 45,000 between 1987 and 1995. By the mid 1990s, however, the regional economy began to recover. The rapidly growing software sector compensated for some of the losses experienced in manufacturing. In this paper, I aim to identify the forces behind this economic recovery. I will investigate whether high technology firms have uncovered new ways to overcome the crisis and the extent to which they have given up their focus on self-reliance and autarkic structures. The empirical findings will also be discussed in the context of the recent debate about the importance of regional competence and collective learning (Storper, 1997; Maskell and Malmberg, 1998). There is a growing body of literature which suggests that some regional economies During the 1980s and early 1990s, the importance of small firm growth and industrial districts in Italy became the focus of a large number of regional development studies. According to this literature, successful industrial districts are characterized by intensive cooperation and market producer-user interaction between small and medium-sized, flexibly specialized firms (Piore and Sabel, 1984; Scott, 1988). In addition, specialized local labor markets develop which are complemented by a variety of supportive institutions and a tradition of collaboration based on trust relations (Amin and Robins, 1990; Amin and Thrift, 1995). It has also been emphasized that industrial districts are deeply embedded into the socio-institutional structures within their particular regions (Grabher, 1993). Many case studies have attempted to find evidence that the regional patterns identified in Italy are a reflection of a general trend in industrial development rather than just being historical exceptions. Silicon Valley, which is focused on high technology production, has been identified as being one such production complex similar to those in Italy (see, for instance, Hayter, 1997). However, some remarkable differences do exist in the institutional context of this region, as well as its particular social division of labor (Markusen, 1996). Even though critics, such as Amin and Robins (1990), emphasized quite early that the Italian experience could not easily be applied to other socio-cultural settings, many studies have classified other high technology regions in the U.S. as being industrial districts, such as Boston s Route 128 area. Too much attention has been paid to the performance of small and medium-sized firms and the regional level of industrial production in the ill-fated debate regarding industrial districts (Martinelli and Schoenberger, 1991). Harrison (1997) has provided substantial evidence that large firms continue to dominate the global economy. This does not, however, imply that a de-territorialization of economic growth is necessarily taking place as globalization tendencies continue (Storper, 1997; Maskell and Malmberg, 1998). In the case of Boston, it has been misleading to define its regional economy as being an industrial district. Neither have small and medium-sized firms been decisive in the development of the Route 128 area nor has the region developed a tradition of close communication between vertically-disintegrated firms (Dorfman, 1983; Bathelt, 1991a). Saxenian (1994) found that Boston s economy contrasted sharply with that of an industrial district. Specifically, the region has been dominated by large, vertically-integrated high technology firms which are reliant on proprietary technologies and autarkic firm structures. Several studies have tried to compare the development of the Route 128 region to Silicon Valley. These studies have shown that both regions developed into major 2 agglomerations of high technology industries in the post-World War II period. Due to their different traditions, structures and practices, Silicon Valley and Route 128 have followed divergent development paths which have resulted in a different regional specialization (Dorfman, 1983; Saxenian, 1985; Kenney and von Burg, 1999). In the mid 1970s, both regions were almost equally important in terms of the size of their high technology sectors. Since then, however, Silicon Valley has become more important and has now the largest agglomeration of leading-edge technologies in the U.S. (Saxenian, 1994). Saxenian (1994) argues that the superior performance of high technology industries in Silicon Valley over those in Boston is based on different organizational patterns and manufacturing cultures which are embedded in those socio-institutional traditions which are particular to each region. Despite the fact that Saxenian (1994) has been criticized for basing her conclusions on weak empirical research (i.e. Harrison, 1997; Markusen, 1998), she offers a convincing explanation as to why the development paths of both regions have differed.1 Saxenian s (1994) study does not, however, identify which structures and processes have enabled both regions to overcome economic crises. In the case of the Boston economy, high technology industries have proven that they are capable of readjusting and rejuvenating their product and process structures in such a way that further innovation and growth is stimulated. This is also exemplified by the region s recent economic development. In the late 1980s, Boston experienced an economic decline when the minicomputer industry lost its competitive basis and defense expenditures were drastically reduced. The number of high technology manufacturing jobs decreased by more than 45,000 between 1987 and 1995. By the mid 1990s, however, the regional economy began to recover. The rapidly growing software sector compensated for some of the losses experienced in manufacturing. In this paper, I aim to identify the forces behind this economic recovery. I will investigate whether high technology firms have uncovered new ways to overcome the crisis and the extent to which they have given up their focus on self-reliance and autarkic structures. The empirical findings will also be discussed in the context of the recent debate about the importance of regional competence and collective learning (Storper, 1997; Maskell and Malmberg, 1998). There is a growing body of literature which suggests that some regional economies an develop into learning economies which are based on intra-regional production linkages, interactive technological learning processes, flexibility and proximity (Storper, 1992; Lundvall and Johnson, 1994; Gregersen and Johnson, 1997). In the next section of this paper, I will discuss some of the theoretical issues regarding localized learning processes, learning economies and learning regions (see, also, Bathelt, 1999). I will then describe the methodology used. What follows is a brief overview of how Boston s economy has specialized in high technology production. The main part of the paper will then focus on recent trends in Boston s high technology industries. It will be shown that the high technology economy consists of different subsectors which are not tied to a single technological development path. The various subsectors are, at least partially, dependent on different forces and unrelated processes. There is, however, tentative evidence which suggests that cooperative behavior and collective learning in supplierproducer- user relations have become important factors in securing reproductivity in the regional structure. The importance of these trends will be discussed in the conclusions.
This research was conducted in the Rwenzori Region of the Western Branch, East African Rift System (EARS). The EARS is a tectonic structure extending over a length of more than 3000 km from the Afar Triple Junction, in Ethiopia, to Lake Malawi in the south. The Western Rift System is a roughly NE to ENE trending sector of the EARS, which runs along the western boundary of Uganda and the neighboring Democratic Republic of Congo (D.R.C). It stretches 2100 km from Nimule, NW on Uganda-Sudan border, extending to Lake Malawi in the SE of Africa. The unusual uplift of the Rwenzori Mountains within an extensional regime and the mechanisms associated with the high frequency of seismic activity in the region was hardly understood and therefore, had remained a subject of contention that needed to be critically addressed in detail. To my knowledge, this was probably the first study to be performed and documented in great depth within the domains of seismic noise variation, seismic anisotropy and b value analyses beneath the Rwenzori Region. After about six years of operation (2006-2012), the seismology group of the RIFTLINK Research Project (www.riftlink.org) acquired a vast amount of high-quality, digital data that were collected using a seismic network of well calibrated seismic equipment. The project was divided into two phases. Phase I, that operated between February 2006 - September 2007, consisted of thirty-two temporary seismic stations, which were selectively spread out in the Rwenzori Region on the Ugandan side, to detect and record extremely weak as well as strong naturally occurring earthquakes. The seismic equipment used included EDL and REFTEK digitizers, which were coupled with Güralp and MARK sensors respectively (REFTEKS: only short-period MARK sensors, EDLs: short-period MARK plus few broadband Güralp Sensors). Exactly 22375 earthquakes were recorded. The data were processed using the SEISAN software package. About 14413 earthquakes were carefully localized using the velocity model of Bram (1975) that implements a Vp=Vs ratio fixed at 1.74. Phase II, that extended between 2009-2012 consisted of thirty-two seismic stations, which were spread out around the Rwenzori Mountains, both on the Ugandan side and the neighboring D.R.C. Only Taurus digitizers that were coupled with Trillium sensors were used in the D.R.C. On the Ugandan side however, both EDL and Taurus digitizers, which were coupled with Trillium and Güralp sensors were used. ...
This article reviews the most recent results concerning second harmonic generation (SHG) experiments of non-phase matchable and phase matchable powder samples at high pressures and explains the pressure dependence of the intensity of the SHG signal by correlating it to the ratio between the average coherence length and the average particle size. The examples discussed here include pressure-induced structural changes in quartz, ZnO, ice VII and KIO3. It is shown that the second harmonic generation technique is a unique tool for the detection of pressure-induced structural phase transitions. It is laboratory based and allows fast measurements. It is complementary to X-ray diffraction and provides additional information about the presence of an inversion center for unknown or controversially discussed structures at high pressure.
The ICON single-column mode
(2021)
The single-column mode (SCM) of the ICON (ICOsahedral Nonhydrostatic) modeling framework is presented. The primary purpose of the ICON SCM is to use it as a tool for research, model evaluation and development. Thanks to the simplified geometry of the ICON SCM, various aspects of the ICON model, in particular the model physics, can be studied in a well-controlled environment. Additionally, the ICON SCM has a reduced computational cost and a low data storage demand. The ICON SCM can be utilized for idealized cases—several well-established cases are already included—or for semi-realistic cases based on analyses or model forecasts. As the case setup is defined by a single NetCDF file, new cases can be prepared easily by the modification of this file. We demonstrate the usage of the ICON SCM for different idealized cases such as shallow convection, stratocumulus clouds, and radiative transfer. Additionally, the ICON SCM is tested for a semi-realistic case together with an equivalent three-dimensional setup and the large eddy simulation mode of ICON. Such consistent comparisons across the hierarchy of ICON configurations are very helpful for model development. The ICON SCM will be implemented into the operational ICON model and will serve as an additional tool for advancing the development of the ICON model.
The most frequently used boundary-layer turbulence parameterization in numerical weather prediction (NWP) models are turbulence kinetic energy (TKE) based-based schemes. However, these parameterizations suffer from a potential weakness, namely the strong dependence on an ad-hoc quantity, the so-called turbulence length scale. The physical interpretation of the turbulence length scale is difficult and hence it cannot be directly related to measurements or large eddy simulation (LES) data. Consequently, formulations for the turbulence length scale in basically all TKE schemes are based on simplified assumptions and are model-dependent. A good reference for the independent evaluation of the turbulence length scale expression for NWP modeling is missing. Here we propose a new turbulence length scale diagnostic which can be used in the gray zone of turbulence without modifying the underlying TKE turbulence scheme. The new diagnostic is based on the TKE budget: The core idea is to encapsulate the sum of the molecular dissipation and the cross-scale TKE transfer into an effective dissipation, and associate it with the new turbulence length scale. This effective dissipation can then be calculated as a residuum in the TKE budget equation (for horizontal sub-domains of different sizes) using LES data. Estimation of the scale dependence of the diagnosed turbulence length scale using this novel method is presented for several idealized cases.
Aus mehreren Datenquellen wurde ein neuer globaler Niederschlagsdatensatz für die Zeit 1951-2000 generiert, der unter der Bedingung einer Mindestverfügbarkeit von 90 % genau 9.343 Stationen umfasst. Die betreffenden Zeitreihen wurden einer umfassenden Qualitätskontrolle unterzogen, was zu äußerst zahlreichen Korrekturen führte, einschließlich Tests auf Ausreißer und Homogenität sowie Homogenisierung. Daraus entstand ein Gitterpunktdatensatz in 0,5° x 0,5°- Auflösung, was für die Landgebiete (ausgenommen Grönland und Antarktis) rund 71.000 Gitterpunkte ergibt, und über INTERNET frei verfügbar bereitgestellt. Davon ausgehend und unter Nutzung weiterer vorliegender Datensätze, insbesondere der Temperatur, wurden zunächst einige grundlegende Untersuchungen zur globalen und regionalen Klima- und Niederschlagsvariabilität durchgeführt. Diese Arbeiten umfassten Analysen der Veränderungen des global gemittelten Niederschlages und potentieller Einflussgrößen, die Neuberechnung der globalen Klimaklassifikation nach Köppen, Untersuchungen zur raumzeitlichen Struktur von Niederschlagsänderungen global sowie speziell in Afrika und schließlich Analysen der raumzeitlichen Beziehungen zwischen großräumiger atmosphärischer Zirkulation und Niederschlag im nordatlantisch-europäischen Bereich. Für weitergehende statistische Analysen wurde eine neue Methode der vollständigen Zeitreihenmodellierung entwickelt, um die die in diesen Reihen enthaltenen signifikanten Variationskomponenten durch Regressionstechniken zu erfassen und in ihrem raumzeitlichen Verhalten darzustellen. Dabei lag ein Schwerpunkt dieser Arbeiten auf der Extremwertanalyse, die es nun gestattet, unabhängig vom Verteilungstyp für beliebige Schwellenwerte den zeitlichen Verlauf der Unter- sowie Überschreitungswahrscheinlichkeit anzugeben und somit zu erkennen, inwieweit das Klima extremer geworden ist. Dabei zeigte sich je nach Region die Gumbel- oder die Weibull-Verteilung als geeignet. Regionale Schwerpunkte waren dabei u.a. Deutschland bzw. Europa, auch hinsichtlich der Erstellung neuer Klimatrendkarten nach der üblichen linearen Methode (der kleinsten Quadrate) sowie der innovativen. Weiterhin wurden nach der innovativen Methode Klimamodelldaten des Hamburger Max-Planck-Instituts für Meteorologie (IPCC Szenario A2) hinsichtlich des Niederschlag-Extremverhaltens in Europa untersucht. Schließlich erfolgte eine Abschätzung der Wiederkehrzeiten täglicher Extremniederschläge in Deutschland und deren Unsicherheit.
Die vorliegende geologische Arbeit befaßt sich mit einem Ausschnitt des Taunus. Der Taunus ist der südöstlichste Teil des Rheinischen Schiefergebirges und liegt in etwa zwischen Koblenz, Gießen, Frankfurt und Wiesbaden (Abb. 1 und 2). Marine Flachseesedimente prägen hier das Unterdevon des Rheinischen Schiefergebirges. Durch variszische Deformation entstand überwiegend NW- bis NNW-vergenter Faltenbau. Gravitative Kräfte ließen weitere tektonische Strukturen entstehen. Tertiäre Bruchtektonik schuf Horste und Gräben....... Das bearbeitete Gebiet weist unter großflächigen quartären Schuttdecken unterdevonische Sedimente der Tonschiefer- und Feinsandsteinfraktion auf. Im Unterdevon sorgte rasche Sedimentation bei ständiger Absenkung des Rheinischen Trogs für ein flaches Meer. Im Norden des Kartiergebiets tritt eine Fossilbank mit mariner Fauna zutage. Bei der mesozoisch-tertiären Verwitterung wurden die oberflächennahen Gesteine gelockert und Vererzungen und Roterden gebildet. Taleinschnitte in die tertiäre Rumpffläche sind pleistozänen Alters. Das devonische Gestein ist anchimetamorph überprägt und zeigt eine deutliche erste Schieferung, welche von einer intensiven Glimmerneubildung begleitet ist und primär stark nordwestvergent angelegt wurde. In feinpelitischen Bereichen kann eine zweite, postkristalline Schieferung ausgebildet sein. Durch starken Schuppenbau und anhaltende laterale Einengung bei der variszischen Überprägung entstanden im Taunus sogenannte "horse structures": Es kam zu sukzessiver Aufrichtung hangender Schuppeneinheiten bei nordwestlich fortschreitender Anlage von Überschiebungsbahnen im Liegenden. Im Scheitelbereich eines so entstandenen Vergenzfächers liegt das Kartiergebiet. Achsenflächen und Hauptschieferung stehen steil bis saiger. In diesen Bereichen kam es beim Kollaps des Gebirges durch gravitative Kräfte zur Anlage von Knickbändern. Sie ersetzen Verschiebungsflächen. Vereinzelt sind sie auch mit Abschiebungen verbunden. Die am häufigsten aufgeschlossene Knickband-Schar hat nach SE abschiebenden Charakter, eine zweite zeigt NW-gerichteten Bewegungssinn. Sie sind aufgrund der gleichgerichteten vertikalen Einengung zusammengehörend bzw. konjungiert. Die Knickachsen beider Scharen tauchen mit nur wenigen Grad in Streichrichtung ab. Manchmal sind Knickbänder dieser beiden Gruppen direkt konjungiert aufgeschlossen. Möglicherweise durch Rotation, als Teil konjungierter Knickbänder oder innerhalb größerer übergeordneter Knickbänder erscheinen einige der Knickbänder aufschiebend. Eine untergeordnete, dritte Knickband-Schar deutet mit schrägabschiebendem Verschiebungssinn eine Rotation der Spannungsrichtung und möglicherweise erste Bewegungen der Idsteiner Senke an. Sie ist im Untersuchungsgebiet nur selten aufgeschlossen. Die Untersuchungen im Zuge dieser Diplomarbeit ergaben, daß die Knickbänder bevorzugt in Bereichen südvergenter Schieferung entstanden. Im Süden und südlich des Kartiergebiets weist die Schieferung häufiger Südvergenz auf, weshalb dort fast ausschließlich nach S bis SE abschiebende Knickbänder einzumessen waren. Unterschiede zwischen Messungen im Westen und Osten des Gebiets wurden nicht festgestellt. Ein weiteres Ergebnis dieser Arbeit ist eine Longitudinalstrain-Berechnung von 3,4-6,8 % für die Gesteinspartien mit Knickbändern. Die Anlage der Knickbänder wird als letzte variszische Deformation angesehen. Ihr folgten außer kleineren Abschiebungen möglicherweise noch syn- und antithetische Rotationsbewegungen einzelner Gesteinsschollen. Demnach würden sich insgesamt die Anlage der Knickbänder und die Bildung der Vergenzfächer zeitlich überschneiden. Das Einfallen der Knickachsen und auch anderer Achsen und Lineare flach nach SW, ist wahrscheinlich durch tertiäre Bruchschollentektonik bedingt. Diese Bruchtektonik gliedert das Gebirge in Schollen mit Horsten und Gräben, so z.B. die bedeutende Grabenstruktur der Idsteiner Senke. Dabei kann der Vergenzfächer trotz vertikaler Bewegung horizontal versetzt worden sein. Seine Scheitellinie verändert zur Tiefe hin die Position ("horse structures") und tritt bei einer erodierten Hochscholle versetzt zutage.
Fossil records of early solar irradiation and cosmolocation of the CAI factory: a reappraisal
(2021)
Calcium-aluminum–rich inclusions (CAIs) in meteorites carry crucial information about the environmental conditions of the nascent Solar System prior to planet formation. Based on models of 50V–10Be co-production by in-situ irradiation, CAIs are considered to have formed within ~0.1 AU from the proto-Sun. Here, we present vanadium (V) and strontium (Sr) isotopic co-variations in fine- and coarse-grained CAIs and demonstrate that kinetic isotope effects during partial condensation and evaporation best explain V isotope anomalies previously attributed to solar particle irradiation. We also report initial excesses of 10Be and argue that CV CAIs possess essentially a homogeneous level of 10Be, inherited during their formation. Based on numerical modeling of 50V–10Be co-production by irradiation, we show that CAI formation during protoplanetary disk build-up likely occurred at greater heliocentric distances than previously considered, up to planet-forming regions (~1AU), where solar particle fluxes were sufficiently low to avoid substantial in-situ irradiation of CAIs.
Subduction zone magmas are more oxidised on eruption than those at mid-ocean ridges. This is attributed either to oxidising components, derived from subducted lithosphere (slab) and added to the mantle wedge, or to oxidation processes occurring during magma ascent via differentiation. Here we provide direct evidence for contributions of oxidising slab agents to melts trapped in the sub-arc mantle. Measurements of sulfur (S) valence state in sub-arc mantle peridotites identify sulfate, both as crystalline anhydrite (CaSO4) and dissolved SO42− in spinel-hosted glass (formerly melt) inclusions. Copper-rich sulfide precipitates in the inclusions and increased Fe3+/∑Fe in spinel record a S6+–Fe2+ redox coupling during melt percolation through the sub-arc mantle. Sulfate-rich glass inclusions exhibit high U/Th, Pb/Ce, Sr/Nd and δ34S (+ 7 to + 11‰), indicating the involvement of dehydration products of serpentinised slab rocks in their parental melt sources. These observations provide a link between liberated slab components and oxidised arc magmas.
The focus of this study were Celtic gold coins excavated from the Martberg, a Celtic oppidium and sanctuary, occupied in the first century B.C. by a Celtic tribe known as the Treveri. These coins and a number of associated coinages, were characterised in terms of their alloy compositions and their geochemical and isotopic signatures so as to answer archaeological and numismatic questions of coinage development and metal sources. This required the development of analytical methods involving; Electron Microprobe (EPMA), Laser Ablation-ICP-MS, solution Multicollector-ICPMS and LA-MC-ICP-MS. The alloy compositions (Au-Ag-Cu-Sn) were determined by EPMA on a small polished area on the edge of the coins. A large beam size, 50µm (diameter), was used to overcome the extreme heterogeneity of these alloys. These analyses were shown to be representative of the bulk composition of the coins. The metallurgical development of the coinages was defined and showed that the earlier coinages followed a debasement trend, which was superceded by a trend of increasing copper at the expense of sliver while gold compositions remained stable. This change occurred with the appearance of the inscribed "POTTINA" coinage, Scheers 30/V. Two typologically different coinages, Scheers 16 and 18 ("Armorican Types") were found to have markedly different compositions which do not fit into the trends described above. A Flan for a gold coin, which may indicate the presence of a mint at the Martberg, was found to have an identicle weight and composition as the Scheers 30/I coins, which preceeded the majority of the coins found at the Martberg in the coin development chronology. The trace element anaylses were made by Laser Ablation-ICPMS using an AridusTM desolvating nebuliser to introduce matrix matched solution standards to calibrate the measurements, which were then normalised to 100%. Quantitative results were obtained for the following elements: Sc, Ti, Cr, Mn, Co, Ni, Cu, Zn, Se, Ru, Rh, Pd, Ag, Sb, Te, W, Ir, Pt, Pb, Bi. The remaining elements remain problematic as they produced incorrect standardisations mainly due to chemical effects in solution such as adsorption onto the beaker walls or oxidation : V, Fe, Ga, Ge, As, Mo, Sn, Re, Os, Hg. Changes in the sources of Au, Ag and Cu were observed during the development of the coinages through the variation of trace elements, which correlate positively with the major components of the coin alloys. Changes in the Pt/Au ratios show that the Scheers 23 coins contain distinctly different gold from the later coinages and that the Scheers 18 gold source was also different. Te/Ag was used to show that the Sch.23 coins also contained different silver and some subgroups were observed in the Sch. 30/V coins. A major change in copper source is indicated by the sudden increase of Sb and Ni with the introduction of the Sch. 30/V coins (POTTINA), which can be linked to a similar change in copper observed in the contemporary silver coinage, Sch. 55 (with a ring). Lead isotopic analyses were made by solution- and Laser Ablation - MC-ICP-MS, The laser technique proved to be in good agreement with the solution analyses with precisions between 1 and 0.1%o (per mil). The development of the laser method opens the way for easy and virtually non-destructive Pb isotopic determinations of ancient gold coins. The results showed that Sch. 23 is very different from the following coinages, Sch. 16 and 18 are also different, forming their own group, and all the later "Eye" staters (Sch. 30/I-VI) lie on a mixing line controlled by the addition of copper from a Mediterranean source, probably Sardinia or Spain. An indication of gold and silver sources should be possible with further analyses of the Sch. 23 and Rainbow Cup gold coins and the Sch. 54 and 55 silver coinages. Copper Isotopic analyses were made by solution- and Laser Ablation - MC-ICP-MS. Both techniques require further development to produce more reproducible results. The results show that there appears to be a trend to more positive d Cu65 values for the later coinages and that the link between the copper used in the Sch. 30/V (POTTINA) coins and the silver Sch. 55 (with a ring) coins is also shown by similarly postive d Cu65 values. The full suite of analyses were also made on samples of gold from the region. They were mostly composed of "placer gold", alluvial gold found in rivers. It was found that when a study is restricted to a limited number of deposits or areas then it is possible to distinguish between deposits based on the concentration of those elements which are least affected by transport related alteration processes. These elements include; the PGE's, due to their refractory nature, and those elements which are usually present in high enough concentrations to remain relatively unaffected, eg: Cu, Pb and Sb. Due to the nature of the coin alloy it is not possible to link the gold used in the coins studied here with gold deposits, as the large amounts of Ag and Cu, added to the coin alloys, have masked the Au signature. However, further Pb isotopic analyses of gold deposits should prove useful in determining from which regions Celtic gold was derived.
A complete, well-preserved record of the Cenomanian/Turonian (C/T) Oceanic Anoxic Event 2 (OAE-2) was recovered from Demerara Rise in the southern North Atlantic Ocean (ODP site 1260). Across this interval, we determined changes in the stable carbon isotopic composition of sulfur-bound phytane (δ13Cphytane), a biomarker for photosynthetic algae. The δ13Cphytane record shows a positive excursion at the onset of the OAE-2 interval, with an unusually large amplitude (~7‰) compared to existing C/T proto-North Atlantic δ13Cphytane records (3–6‰). Overall, the amplitude of the excursion of δ13Cphytane decreases with latitude. Using reconstructed sea surface temperature (SST) gradients for the proto-North Atlantic, we investigated environmental factors influencing the latitudinal δ13Cphytane gradient. The observed gradient is best explained by high productivity at DSDP Site 367 and Tarfaya basin before OAE-2, which changed in overall high productivity throughout the proto-North Atlantic during OAE-2. During OAE-2, productivity at site 1260 and 603B was thus more comparable to the mid-latitude sites. Using these constraints as well as the SST and δ13Cphytane-records from Site 1260, we subsequently reconstructed pCO2 levels across the OAE-2 interval. Accordingly, pCO2 decreased from ca. 1750 to 900 ppm during OAE-2, consistent with enhanced organic matter burial resulting in lowering pCO2. Whereas the onset of OAE-2 coincided with increased pCO2, in line with a volcanic trigger for this event, the observed cooling within OAE-2 probably resulted from CO2 sequestration in black shales outcompeting CO2 input into the atmosphere. Together these results show that the ice-free Cretaceous world was sensitive to changes in pCO2 related to perturbations of the global carbon cycle.
A complete, well-preserved record of the Cenomanian/Turonian (C/T) Oceanic Anoxic Event 2 (OAE-2) was recovered from Demerara Rise in the southern North Atlantic Ocean (ODP site 1260). Across this interval, we determined changes in the stable carbon isotopic composition of sulfur-bound phytane (δ13Cphytane, a biomarker for photosynthetic algae. The δ13Cphytane record shows a positive excursion at the onset of the OAE-2 interval, with an unusually large amplitude (~7 ‰) compared to existing C/T proto-North Atlantic δ13Cphytane records (3–6 ‰). Overall, the amplitude of the excursion of δ13Cphytane decreases with latitude. Using reconstructed sea surface temperature (SST) gradients for the proto-North Atlantic, we investigated environmental factors influencing the latitudinal δ13Cphytane gradient. The observed gradient is best explained by high productivity at DSDP Site 367 and Tarfaya basin before OAE-2, which changed in overall high productivity throughout the proto-North Atlantic during OAE-2. During OAE-2, productivity at site 1260 and 603B was thus more comparable to the mid-latitude sites. Using these constraints as well as the SST and δ13Cphytane-records from Site 1260, we subsequently reconstructed pCO2 levels across the OAE-2 interval. Accordingly, pCO2 decreased from ca. 1750 to 900 ppm during OAE-2, consistent with enhanced organic matter burial resulting in lowering pCO2. Whereas the onset of OAE-2 coincided with increased pCO2, in line with a volcanic trigger for this event, the observed cooling within OAE-2 probably resulted from CO2 sequestration in black shales outcompeting CO2 input into the atmosphere. Together these results show that the ice-free Cretaceous world was sensitive to changes in pCO2 related to perturbations of the global carbon cycle.
Aus der Notwendigkeit heraus, "nachhaltig die Funktionen des Bodens zu sichern" (§1 BBodSchG), und damit auch Bodenschutz vorsorgend in Planungsprozesse zu integrieren, wurde ein neues Bodenschutzkonzept entwickelt. Es basiert auf einer differenzierten, aber gleichzeitig nachvollziehbaren Bodenbewertung. Das Problem bei der Bodenbewertung ist, dass etwas bewertet werden soll, für das - je nach Fragestellung - immer wieder neue Ziele definiert werden müssen. Deshalb liegt der Bodenbewertung ein Zielsystem zu Grunde, das Schutzziele klar festlegt und mit Hilfe dessen die Bodenbewertung nachvollziehbar wird. Für das Bodenschutzkonzept werden aus der Vielzahl möglicher Kriterien wichtige vorgestellt, aus denen die - bezogen auf dieses Zielsystem - wesentlichen ausgewählt werden können. Um aussagekräftige Daten für diese Kriterien zu erhalten stützt sich die Bodenbewertung auf bodenkundliche sowie landschaftsgenetisch-geomorphologische Zusammenhänge. Die eigentliche Bewertung erfolgt dann in drei Schritten: zuerst eine Einzelbewertung, dann zusammengefasst nach den Bodenfunktionen Lebensraumfunktion, Regelungsfunktion, Informationsfunktion, dem Eigenwert des Bodens (Schutzwürdigkeit) sowie der Empfindlichkeit und Gefährdung (Schutzbedürftigkeit). Im dritten Schritt werden diese Bewertungen dann zu einer gewichteten, verbal-argumentativen Gesamtbewertung der Schutzwürdigkeit und Schutzbedürftigkeit zusammengefasst. Mit Hilfe des Bewertungsverfahrens werden auch Zielkonflikte zwischen den unterschiedlichen Schutzgütern offengelegt. Schutzmaßnahmen ergeben sich dann stringent aus den vorher im Zielsystem gesetzten Prämissen, d.h., Ziele und Maßnahmen sind begründbar gewählt, stehen in einem ökologischen Gesamtzusammenhang und lassen sich sehr gut nachvollziehen. Das hier vorgestellte, neue Bodenschutzkonzept ist für verschiedene Planungsebenen geeignet. Es ist in unterschiedlichen Naturräumen anwendbar, kann verschiedene Schutzziele mit Hilfe des Zielsystems bestimmen und so z.B. die Naturraumvielfalt in einem Gebiet ebenso berücksichtigen wie die Meinungsvielfalt, was unter vorsorgendem Bodenschutz zu verstehen sei.
The main objective of the study presented in this paper was to develop an evaluation scheme which is suitable for spatially explicit groundwater vulnerability assessment according to the Water Framework Directive (WFD). Study area was the Hase river catchment, an area of about 3 000 km2 in north-west Germany which is dominated by livestock farming, in particular pig and poultry production. For the Hase river catchment, the first inventory of the WFD led to the conclusion that 98% of the catchment area is "unclear/unlikely" to reach a good groundwater status due to diffuse nitrogen emissions from agriculture. The groundwater vulnerability assessment was embedded in the PartizipA project ("Participative modelling, Actor and Ecosystem Analysis in Regions with Intensive Agriculture", www.partizipa.net), within which a so-called actors´ platform was established in the study area. The objective of the participatory process was to investigate the effects of the WFD on agriculture as well as to discuss groundwater protection measures which are suitable for an integration in the programme of measures. The study was conducted according to the vulnerability assessment concept of the Intergovernmental Panel on Climate Change, considering sensitivity, exposure and adaptive capacity. Sensitivity was computed using the DRASTIC index of natural groundwater pollution potential. Exposure (for a reference scenario) was computed using the STOFFBILANZ nutrient model. Several regional studies were analysed to evaluate the adaptive capacity. From these studies it was concluded that the adaptive capacity in the Hase river catchment is very low due to the economic importance of the agricultural sector which will be significantly affected by groundwater protection measures. As a consequence, the adaptive capacity was not considered any more in the vulnerability assessment. A groundwater vulnerability evaluation scheme is presented which enjoys the advantage that both exposure and sensitivity can be operationalized in a spatially resolved manner (500×500 m grid) by the two models mentioned above. The evaluation scheme was applied in the Hase river catchment. 21% of the catchment was classified as highly vulnerable, another 73% as medium vulnerable. Only 6% of the Hase river catchment has low vulnerability. Grid cells of the high vulnerability class are considered as priority areas for groundwater protection measures in the programme of measures of the WFD. Measures will be particularly effective in the north-eastern part of the catchment where groundwater vulnerability is mainly due to high nitrogen emissions.
An evaluation scheme is presented in this paper which can be used to assess groundwater vulnerability according to the requirements of the European Water Framework Directive (WFD). The evaluation scheme results in a groundwater vulnerability map identifying areas of high, medium and low vulnerability, as necessary for the measurement planning of the WFD. The evaluation scheme is based on the definition of the vulnerability of the Intergovernmental Panel on Climate Change (IPCC). It considers exposure, sensitivity and the adaptive capacity of the region. The adaptive capacity is evaluated in an actors' platform, which was constituted for the region in the PartizipA ("Participative modelling, Actor and Ecosystem Analysis in Regions with Intensive Agriculture") project. As a result of the vulnerability assessment, 21% of the catchment area was classified as being highly vulnerable, whereas 73% has medium vulnerability and 6% has low vulnerability. Thus, a groundwater vulnerability assessment approach is presented, which can be used in practice on a catchment scale for the WFD measurement planning.
Nucleation experiments starting from the reaction of OH radicals with SO2 have been performed in the IfT-LFT flow tube under atmospheric conditions at 293±0.5 K for a relative humidity of 13–61%. The presence of different additives (H2, CO, 1,3,5-trimethylbenzene) for adjusting the OH radical concentration and resulting OH levels in the range (4–300) ×105 molecule cm -3 did not influence the nucleation process itself. The number of detected particles as well as the threshold H2SO4 concentration needed for nucleation was found to be strongly dependent on the counting efficiency of the used counting devices. High-sensitivity particle counters allowed the measurement of freshly nucleated particles with diameters down to about 1.5 nm. A parameterization of the experimental data was developed using power law equations for H2SO4 and H2O vapour. The exponent for H2SO4 from different measurement series was in the range of 1.7–2.1 being in good agreement with those arising from analysis of nucleation events in the atmosphere. For increasing relative humidity, an increase of the particle number was observed. The exponent for H2O vapour was found to be 3.1 representing an upper limit. Addition of 1.2×1011 molecule cm -3 or 1.2×1012 molecule cm -3 of NH3 (range of atmospheric NH3 peak concentrations) revealed that NH3 has a measureable, promoting effect on the nucleation rate under these conditions. The promoting effect was found to be more pronounced for relatively dry conditions, i.e. a rise of the particle number by 1–2 orders of magnitude at RH = 13% and only by a factor of 2–5 at RH = 47% (NH3 addition: 1.2×1012 molecule cm -3). Using the amine tert-butylamine instead of NH3, the enhancing impact of the base for nucleation and particle growth appears to be stronger. Tert-butylamine addition of about 1010 molecule cm -3 at RH = 13% enhances particle formation by about two orders of magnitude, while for NH3 only a small or negligible effect on nucleation in this range of concentration appeared. This suggests that amines can strongly influence atmospheric H2SO4-H2O nucleation and are probably promising candidates for explaining existing discrepancies between theory and observations.
ucleation experiments starting from the reaction of OH radicals with SO2 have been performed in the IfT-LFT flow tube under atmospheric conditions at 293±0.5 K for a relative humidity of 13–61%. The presence of different additives (H2, CO, 1,3,5-trimethylbenzene) for adjusting the OH radical concentration and resulting OH levels in the range (4–300)·105 molecule cm−3 did not influence the nucleation process itself. The number of detected particles as well as the threshold H2SO4 concentration needed for nucleation was found to be strongly dependent on the counting efficiency of the used counting devices. High-sensitivity particle counters allowed the measurement of freshly nucleated particles with diameters down to about 1.5 nm. A parameterization of the experimental data was developed using power law equations for H2SO4 and H2O vapour. The exponent for H2SO4 from different measurement series was in the range of 1.7–2.1 being in good agreement with those arising from analysis of nucleation events in the atmosphere. For increasing relative humidity, an increase of the particle number was observed. The exponent for H2O vapour was found to be 3.1 representing a first estimate. Addition of 1.2·1011 molecule cm−3 or 1.2·1012 molecule cm−3 of NH3 (range of atmospheric NH3 peak concentrations) revealed that NH3 has a measureable, promoting effect on the nucleation rate under these conditions. The promoting effect was found to be more pronounced for relatively dry conditions. NH3 showed a contribution to particle growth. Adding the amine tert-butylamine instead of NH3, the enhancing impact for nucleation and particle growth appears to be stronger.
The current study tested the assumption that floristic and functional diversity patterns are negatively related to soil nitrogen content. We analyzed 20 plots with soil N-contents ranging from 0.63% to 1.06% in a deciduous forest near Munich (Germany). To describe species adaptation strategies to different nitrogen availabilities, we used a plant functional type (PFT) approach. Each identified PFT represents one realized adaptation strategy to the current environment. These were correlated, next to plant species richness and evenness, to soil nitrogen contents. We found that N-efficient species were typical for low soil nitrogen contents, while N-requiring species occur at high N-contents. In contrast to our initial hypotheses, floristic and functional diversity measures (number of PFTs) were positively related to nitrogen content in the soil. Every functional group has its own adaptation to the prevailing environmental conditions; in consequence, these functional groups can co-exist but do not out-compete one another. The increased number of functional groups at high N-contents leads to increased species richness. Hence, for explaining diversity patterns we need to consider species groups representing different adaptations to the current environmental conditions. Such co-existing ecological strategies may even overcome the importance of competition in their effect on biodiversity.
Aim: Predicting future changes in species richness in response to climate change is one of the key challenges in biogeography and conservation ecology. Stacked species distribution models (S‐SDMs) are a commonly used tool to predict current and future species richness. Macroecological models (MEMs), regression models with species richness as response variable, are a less computationally intensive alternative to S‐SDMs. Here, we aim to compare the results of two model types (S‐SDMS and MEMs), for the first time for more than 14,000 species across multiple taxa globally, and to trace the uncertainty in future predictions back to the input data and modelling approach used.
Location: Global land, excluding Antarctica.
Taxon: Amphibians, birds and mammals.
Methods: We fitted S‐SDMs and MEMs using a consistent set of bioclimatic variables and model algorithms and conducted species richness predictions under current and future conditions. For the latter, we used four general circulation models (GCMs) under two representative concentration pathways (RCP2.6 and RCP6.0). Predicted species richness was compared between S‐SDMs and MEMs and for current conditions also to extent‐of‐occurrence (EOO) species richness patterns. For future predictions, we quantified the variance in predicted species richness patterns explained by the choice of model type, model algorithm and GCM using hierarchical cluster analysis and variance partitioning.
Results: Under current conditions, species richness predictions from MEMs and S‐SDMs were strongly correlated with EOO‐based species richness. However, both model types over‐predicted areas with low and under‐predicted areas with high species richness. Outputs from MEMs and S‐SDMs were also highly correlated among each other under current and future conditions. The variance between future predictions was mostly explained by model type.
Main conclusions: Both model types were able to reproduce EOO‐based patterns in global terrestrial vertebrate richness, but produce less collinear predictions of future species richness. Model type by far contributes to most of the variation in the different future species richness predictions, indicating that the two model types should not be used interchangeably. Nevertheless, both model types have their justification, as MEMs can also include species with a restricted range, whereas S‐SDMs are useful for looking at potential species‐specific responses.
In vorliegender Untersuchung wurde der Rißlöß zwischen der 1. und 2. fossilen Parabraunerde anhand schwächerer Bodenbildungen und eingeschalteter Abtragungsphasen zu gliedern versucht. Im jüngeren Riß herrschte starke Lößsedimentation vor, wobei es in mindestens 6 kaltfeuchten Abschnitten zur Ausbildung schwacher periglazialer Naßböden kam. Die Naßbodenserie wurde als Bruchköbeler Böden (B) bezeichnet. Im jüngsten Rißlöß ist wenige dm unter dem Eemboden als tephrochronologischer Leithorizont der Krifteler Tuff (vgl. SEMMEL 1968) eingeschaltet. Den mittleren Profilbereich im Rißlöß zeichnen feuchtere Klimaabschnitte mit starken Verschwemmungsphasen aus, die in den meisten Profilen zu erheblichen Diskordanzen geführt haben. An der Basis der wenigen kompletten Rißlöß-Profile treten vorwiegend in Hessen über der zumeist gekappten 2. fossilen Parabraunerde maximal zwei Schwarzerden auf, die von SEMMEL (1968) als Weilbacher Humuszonen bezeichnet werden. Unmittelbar über diesen Schwarzerden folgt die Ostheimer Zone, eine Fließerde aus aufgearbeitetem Solumaterial der liegenden Böden. Insgesamt zeigt die aus den Rißböden rekonstruierte Klimaabfolge — neben geringfügigen Abweichungen — überraschende Parallelen zur paläopedologisch-klimatischen Gliederung der Würmkaltzeit.
Explosive volcanism affects weather and climate. Primary volcanic ash particles which act as ice nuclei (IN) can modify the phase and properties of cold tropospheric clouds. During the Eyjafjallajökull volcanic eruption we have measured the highest ice nucleus number concentrations (>600 L) in our record of 2 years of daily IN measurements in central Germany. Even in Israel, located about 5000 km away from Iceland, IN were as high as otherwise only during desert dust storms. These measurements are the only ones available on the properties of IN in the Eyjafjallajökull plume. The measured high concentrations and high activation temperature (−8 °C) point to an important impact of volcanic ash on microphysical and radiative properties of clouds through enhanced glaciation.
We have sampled atmospheric ice nuclei (IN) and aerosol in Germany and in Israel during spring 2010. IN were analyzed by the static vapor diffusion chamber FRIDGE, as well as by electron microscopy. During the Eyjafjallajökull volcanic eruption of April 2010 we have measured the highest ice nucleus number concentrations (>600 l−1) in our record of 2 yr of daily IN measurements in central Germany. Even in Israel, located about 5000 km away from Iceland, IN were as high as otherwise only during desert dust storms. The fraction of aerosol activated as ice nuclei at −18 °C and 119% rhice and the corresponding area density of ice-active sites per aerosol surface were considerably higher than what we observed during an intense outbreak of Saharan dust over Europe in May 2008.
Pure volcanic ash accounts for at least 53–68% of the 239 individual ice nucleating particles that we collected in aerosol samples from the event and analyzed by electron microscopy. Volcanic ash samples that had been collected close to the eruption site were aerosolized in the laboratory and measured by FRIDGE. Our analysis confirms the relatively poor ice nucleating efficiency (at −18 °C and 119% ice-saturation) of such "fresh" volcanic ash, as it had recently been found by other workers. We find that both the fraction of the aerosol that is active as ice nuclei as well as the density of ice-active sites on the aerosol surface are three orders of magnitude larger in the samples collected from ambient air during the volcanic peaks than in the aerosolized samples from the ash collected close to the eruption site. From this we conclude that the ice-nucleating properties of volcanic ash may be altered substantially by aging and processing during long-range transport in the atmosphere, and that global volcanism deserves further attention as a potential source of atmospheric ice nuclei.
Residual circulation trajectories and transit times into the extratropical lowermost stratosphere
(2010)
Transport into the extratropical lowermost stratosphere (LMS) can be divided into a slow part (time-scale of several months to years) associated with the global-scale stratospheric residual circulation and a fast part (time-scale of days to a few months) associated with (mostly quasi-horizontal) mixing (i.e. two-way irreversible transport, including stratosphere-troposphere exchange). The stratospheric residual circulation can be considered to consist of two branches: a deep branch more strongly associated with planetary waves breaking in the middle to upper stratosphere, and a shallow branch more strongly associated with synoptic-scale waves breaking in the subtropical lower stratosphere. In this study the contribution due to the stratospheric residual circulation alone to transport into the LMS is quantified using residual circulation trajectories, i.e. trajectories driven by the (time-dependent) residual mean meridional and vertical velocities. This contribution represents the advective part of the overall transport into the LMS and can be viewed as providing a background onto which the effect of mixing has to be added. Residual mean velocities are obtained from a comprehensive chemistry-climate model as well as from reanalysis data. Transit times of air traveling from the tropical tropopause to the LMS along the residual circulation streamfunction are evaluated and compared to recent mean age of air estimates. A clear time-scale separation with much smaller transit times into the mid-latitudinal LMS than into polar LMS is found that is indicative of a clear separation of the shallow from the deep branch of the residual circulation. This separation between the shallow and the deep circulation branch is further manifested in a clear distinction in the aspect ratio of the vertical to meridional extent of the trajectories as well as the integrated mass flux along the residual circulation trajectories. The residual transit time distribution reproduces qualitatively the observed seasonal cycle of youngest air in the extratropical LMS in fall and oldest air in spring.
Residual circulation trajectories and transit times into the extratropical lowermost stratosphere
(2011)
Transport into the extratropical lowermost stratosphere (LMS) can be divided into a slow part (time-scale of several months to years) associated with the global-scale stratospheric residual circulation and a fast part (time-scale of days to a few months) associated with (mostly quasi-horizontal) mixing (i.e. two-way irreversible transport, including extratropical stratosphere-troposphere exchange). The stratospheric residual circulation may be considered to consist of two branches: a deep branch more strongly associated with planetary waves breaking in the middle to upper stratosphere, and a shallow branch associated with synoptic and planetary scale waves breaking in the subtropical lower stratosphere. In this study the contribution due to the stratospheric residual circulation alone to transport into the LMS is quantified using residual circulation trajectories, i.e. trajectories driven by the (time-dependent) residual mean meridional and vertical velocities. This contribution represents the advective part of the overall transport into the LMS and can be viewed as providing a background onto which the effect of mixing has to be added. Residual mean velocities are obtained from a comprehensive chemistry-climate model as well as from reanalysis data. Transit times of air traveling from the tropical tropopause to the LMS along the residual circulation streamfunction are evaluated and compared to recent mean age of air estimates. A time-scale separation with much smaller transit times into the mid-latitudinal LMS than into polar LMS is found that is indicative of a separation of the shallow from the deep branch of the residual circulation. This separation between the shallow and the deep circulation branch is further manifested in a distinction in the aspect ratio of the vertical to meridional extent of the trajectories, the integrated mass flux along the residual circulation trajectories, as well as the stratospheric entry latitude of the trajectories. The residual transit time distribution reproduces qualitatively the observed seasonal cycle of youngest air in the extratropical LMS in fall and oldest air in spring.
The Miocene was a key time in the evolution of African ecosystems witnessing the origin of the African apes and the isolation of eastern coastal forests through an expanding arid corridor. Until recently, however, Miocene sites from the southeastern regions of the continent were unknown. Here, we report the first Miocene fossil teeth from the shoulders of the Urema Rift in Gorongosa National Park, Mozambique. We provide the first 1) radiometric ages of the Mazamba Formation, 2) reconstructions of paleovegetation in the region based on pedogenic carbonates and fossil wood, and 3) descriptions of fossil teeth. Gorongosa is unique in the East African Rift in combining marine invertebrates, marine vertebrates, reptiles, terrestrial mammals, and fossil woods in coastal paleoenvironments. The Gorongosa fossil sites offer the first evidence of woodlands and forests on the coastal margins of southeastern Africa during the Miocene, and an exceptional assemblage of fossils including new species.
The Miocene is a key time in the evolution of African mammals and their ecosystems witnessing the origin of the African apes and the isolation of eastern coastal forests through an expanding biogeographic arid corridor. Until recently, however, Miocene sites from the southeastern regions of the continent were unknown. Here we report discovery of the first Miocene fossil teeth from the shoulders of the Urema Rift in Gorongosa National Park, Mozambique, at the southern East African Rift System. We provide the first 1) radiometric age determinations of the fossiliferous Mazamba Formation, 2) reconstructions of past vegetation in the region based on pedogenic carbonates and fossil wood, and 3) description of fossil teeth from the southern rift. Gorongosa is unique in the East African Rift System in combining marine invertebrates, marine vertebrates, terrestrial mammals, and fossil woods in coastal paleoenvironments. The Gorongosa fossil sites offer the first evidence of persistent woodlands and forests on the coastal margins of southeastern Africa during the Miocene, and an exceptional assemblage of fossil vertebrates including new species. Further work will allow the testing of hypotheses positing the formation of a northeast-southwest arid corridor isolating species on the eastern coastal forests from those elsewhere in Africa.
Brief The Miocene is a key time in the evolution of African mammals and their ecosystems encompassing hominine origins and the establishment of an arid corridor that isolated eastern Africa’s coastal forests. Until now, however, Miocene sites from southeastern Africa have been unknown. We report the discovery of the first Miocene fossil sites from Gorongosa National Park, Mozambique, and show that these sites formed in coastal settings. We provide radiometric ages for the fossiliferous sediments, reconstructions of past vegetation based on stable isotopes and fossil wood, and a description of the first fossil teeth from the region. Gorongosa is the only paleontological site in the East African Rift that combines fossil woods, marine invertebrates, marine vertebrates, and terrestrial mammals. Gorongosa offers the first evidence of persistent woodlands and forests on the coastal margins of southeastern Africa during the Miocene.
The link between atmospheric radicals and newly formed particles at a spruce forest site in Germany
(2013)
It has been claimed for more than a century that atmospheric new particle formation is primarily influenced by the presence of sulphuric acid. However, the activation process of sulphuric acid related clusters into detectable particles is still an unresolved topic. In this study we focus on the PARADE campaign measurements conducted during August/September 2011 at Mt. Kleiner Feldberg in central Germany. During this campaign a set of radicals, organic and inorganic compounds and oxidants and aerosol properties were measured or calculated. We compared a range of organic and inorganic nucleation theories, evaluating their ability to simulate measured particle formation rates at 3 nm in diameter (J3) for a variety of different conditions. Nucleation mechanisms involving only sulphuric acid tentatively captured the observed noon-time daily maximum in J3, but displayed an increasing difference to J3 measurements during the rest of the diurnal cycle. Including large organic radicals, i.e. organic peroxy radicals (RO2) deriving from monoterpenes and their oxidation products in the nucleation mechanism improved the correlation between observed and simulated J3. This supports a recently proposed empirical relationship for new particle formation that has been used in global models. However, the best match between theory and measurements for the site of interest was found for an activation process based on large organic peroxy radicals and stabilized Criegee intermediates (sCI). This novel laboratory derived algorithm simulated the daily pattern and intensity of J3 observed in the ambient data. In this algorithm organic derived radicals are involved in activation and growth and link the formation rate of smallest aerosol particles with OH during daytime and NO3 during nighttime. Because of the RO2s lifetime is controlled by HO2 and NO we conclude that peroxy radicals and NO seem to play an important role for ambient radical chemistry not only with respect to oxidation capacity but also for the activation process of new particle formation. This is supposed to have significant impact of atmospheric radical species on aerosol chemistry and should to be taken into account when studying the impact of new particles in climate feedback cycles.
The link between atmospheric radicals and newly formed particles at a spruce forest site in Germany
(2014)
It has been claimed for more than a century that atmospheric new particle formation is primarily influenced by the presence of sulfuric acid. However, the activation process of sulfuric acid related clusters into detectable particles is still an unresolved topic. In this study we focus on the PARADE campaign measurements conducted during August/September 2011 at Mt Kleiner Feldberg in central Germany. During this campaign a set of radicals, organic and inorganic compounds and oxidants and aerosol properties were measured or calculated. We compared a range of organic and inorganic nucleation theories, evaluating their ability to simulate measured particle formation rates at 3 nm in diameter (J3) for a variety of different conditions. Nucleation mechanisms involving only sulfuric acid tentatively captured the observed noon-time daily maximum in J3, but displayed an increasing difference to J3 measurements during the rest of the diurnal cycle. Including large organic radicals, i.e. organic peroxy radicals (RO2) deriving from monoterpenes and their oxidation products, in the nucleation mechanism improved the correlation between observed and simulated J3. This supports a recently proposed empirical relationship for new particle formation that has been used in global models. However, the best match between theory and measurements for the site of interest was found for an activation process based on large organic peroxy radicals and stabilised Criegee intermediates (sCI). This novel laboratory-derived algorithm simulated the daily pattern and intensity of J3 observed in the ambient data. In this algorithm organic derived radicals are involved in activation and growth and link the formation rate of smallest aerosol particles with OH during daytime and NO3 during night-time. Because the RO2 lifetime is controlled by HO2 and NO we conclude that peroxy radicals and NO seem to play an important role for ambient radical chemistry not only with respect to oxidation capacity but also for the activation process of new particle formation. This is supposed to have significant impact of atmospheric radical species on aerosol chemistry and should be taken into account when studying the impact of new particles in climate feedback cycles.
Atmospheric new particle formation is a general phenomenon observed over coniferous forests. So far nucleation is described as a function of gaseous sulfuric acid concentration only, which is unable to explain the observed seasonality of nucleation events at different measurement sites. Here we introduce a new nucleation parameter including ozone and water vapor concentrations as well as UV-B radiation as a proxy for OH radical formation. Applying this new parameter to field studies conducted at Finnish and German measurement sites it is found capable to predict the occurrence of nucleation events and their seasonal and annual variation indicating a significant role of organics. Extrapolation to possible future conditions of ozone, water vapor and organic concentrations leads to a significant potential increase in nucleation event number.
Atmospheric new particle formation is a general phenomenon observed over coniferous forests. So far nucleation is either parameterised as a function of gaseous sulphuric acid concentration only, which is unable to explain the observed seasonality of nucleation events at different measurement sites, or as a function of sulphuric acid and organic molecules. Here we introduce different nucleation parameters based on the interaction of sulphuric acid and terpene oxidation products and elucidate the individual importance. They include basic trace gas and meteorological measurements such as ozone and water vapour concentrations, temperature (for terpene emission) and UV B radiation as a proxy for OH radical formation. We apply these new parameters to field studies conducted at conducted at Finnish and German measurement sites and compare these to nucleation observations on a daily and annual scale. General agreement was found, although the specific compounds responsible for the nucleation process remain speculative. This can be interpreted as follows: During cooler seasons the emission of biogenic terpenes and the OH availability limits the new particle formation while towards warmer seasons the ratio of ozone and water vapour concentration seems to dominate the general behaviour. Therefore, organics seem to support ambient nucleation besides sulphuric acid or an OH-related compound. Using these nucleation parameters to extrapolate the current conditions to prognosed future concentrations of ozone, water vapour and organic concentrations leads to a significant potential increase in the nucleation event number.
In this study we report the set-up of a novel twin chamber technique that uses the comparative method and establishes an appropriate connection of atmospheric and laboratory methods to broaden the tools for investigations. It is designed to study the impact of certain parameters and gases on ambient processes, such as particle formation online, and can be applied in a large variety of conditions. The characterisation of both chambers proved that both chambers operate identically, with a residence time xT (COMPASS1) = 26.5 ± 0.3 min and xT (COMPASS2) = 26.6 ± 0.4 min, at a typical flow rate of 15 L min−1 and a gas leak rate of (1.6 ± 0.8) × 10−5 s−1. Particle loss rates were found to be larger (due to the particles' stickiness to the chamber walls), with an extrapolated maximum of 1.8 × 10−3 s−1 at 1 nm, i.e. a hundredfold of the gas leak rate. This latter value is associated with sticky non-volatile gaseous compounds, too. Comparison measurement showed no significant differences. Therefore operation under atmospheric conditions is trustworthy. To indicate the applicability and the benefit of the system, a set of experiments was conducted under different conditions, i.e. urban and remote, enhanced ozone and terpenes as well as reduced sunlight. In order to do so, an ozone lamp was applied to enhance ozone in one of two chambers; the measurement chamber was protected from radiation by a first-aid cover and volatile organic compounds (VOCs) were added using a small additional flow and a temperature-controlled oven. During the elevated ozone period, ambient particle number and volume increased substantially at urban and remote conditions, but by a different intensity. Protection of solar radiation displayed a clear negative effect on particle number, while terpene addition did cause a distinct daily pattern. E.g. adding β pinene particle number concentration rose by 13% maximum at noontime, while no significant effect was observable during darkness. Therefore, the system is a useful tool for investigating local precursors and the details of ambient particle formation at surface locations as well as potential future feedback processes.
The anthropogenic influence on climate and environment has increased strongly since industrialization about 150 yr ago. The consequences for the atmosphere became more and more apparent and nowadays affect our life quality on Earth progressively. Because of that it is very important to understand the atmospheric processes, on which these effects are based on, in detail. In this study we report the set-up of a novel twin chamber technique that uses the comparative method and establishes an appropriate connection of atmospheric and laboratory methods to broaden the tools for investigations. It is designed to study the impact of certain parameters and gases on ambient processes such as particle formation online and can be applied in a large variety of conditions. The characterisation of both chambers proved that both chambers operate identically with a residence time (xT (COMPASS 1) = 26.5 ± 0.3 min and xT (COMPASS 2) = 26.6 ± 0.4 min) at a typical flow rate of 15 L min−1 and a deposition rate (1.6 ± 0.8) × 10−5 s−1. Comparison measurement showed no significant differences. Therefore operation under atmospheric conditions is trustworthy. To indicate the applicability and the benefit of the system a set of experiments was conducted at different conditions, i.e. urban and remote, enhancing ozone and terpenes as well as reducing sunlight. In the ozone enhanced ambient particle number and volume increased substantially at urban and remote conditions in a different strength. Solar radiation displayed a clear positive effect on particle number as well as terpene addition did at remote conditions. Therefore the system is a useful tool to investigate local precursors, the details of ambient particle formation at surface locations as well as future feedback processes.
Desert dust is one of the most abundant ice nucleating particle types in the atmosphere. Traditionally, clay minerals were assumed to determine the ice nucleation ability of desert dust and constituted the focus of ice nucleation studies over several decades. Recently some feldspar species were identified to be ice active at much higher temperatures than clay minerals, redirecting studies to investigate the contribution of feldspar to ice nucleation on desert dust. However, so far no study has shown the atmospheric relevance of this mineral phase.
For this study four dust samples were collected after airborne transport in the troposphere from the Sahara to different locations (Crete, the Peloponnese, Canary Islands, and the Sinai Peninsula). Additionally, 11 dust samples were collected from the surface from nine of the biggest deserts worldwide. The samples were used to study the ice nucleation behavior specific to different desert dusts. Furthermore, we investigated how representative surface-collected dust is for the atmosphere by comparing to the ice nucleation activity of the airborne samples. We used the IMCA-ZINC setup to form droplets on single aerosol particles which were subsequently exposed to temperatures between 233 and 250 K. Dust particles were collected in parallel on filters for offline cold-stage ice nucleation experiments at 253–263 K. To help the interpretation of the ice nucleation experiments the mineralogical composition of the dusts was investigated. We find that a higher ice nucleation activity in a given sample at 253 K can be attributed to the K-feldspar content present in this sample, whereas at temperatures between 238 and 245 K it is attributed to the sum of feldspar and quartz content present. A high clay content, in contrast, is associated with lower ice nucleation activity. This confirms the importance of feldspar above 250 K and the role of quartz and feldspars determining the ice nucleation activities at lower temperatures as found by earlier studies for monomineral dusts. The airborne samples show on average a lower ice nucleation activity than the surface-collected ones. Furthermore, we find that under certain conditions milling can lead to a decrease in the ice nucleation ability of polymineral samples due to the different hardness and cleavage of individual mineral phases causing an increase of minerals with low ice nucleation ability in the atmospherically relevant size fraction. Comparison of our data set to an existing desert dust parameterization confirms its applicability for climate models. Our results suggest that for an improved prediction of the ice nucleation ability of desert dust in the atmosphere, the modeling of emission and atmospheric transport of the feldspar and quartz mineral phases would be key, while other minerals are only of minor importance.
Desert dust is one of the most abundant ice nucleating particle types in the atmosphere. Tra ditionally, clay minerals were assumed to determine the ice nucleation ability of desert dust and constituted the focus of ice nucleation studies. Only recently some feldspar species were identified to be ice-active at much higher temperatures than clay minerals, redirecting studies to investigate the contribution of feldspar to ice nucleation on desert dust. However, so far no study has shown the atmospheric relevance of this mineral phase.
For this study four dust samples were collected after airborne transport in the troposphere from the Sahara to different locations (Crete, the Peloponnese, Canary Islands and the Sinai Peninsula). Additionally, eleven dust samples were collected from the surface from nine of the biggest deserts worldwide. The samples were used to study the ice nucleation behavior specific to different desert dusts. Furthermore we investigated how representative ice nucleation on surface-collected dust is for that in the atmosphere by comparing to the ice nucleation activity of the airborne samples. We used the IMCA-ZINC set-up to form droplets on single aerosol particles which were subsequently exposed to temperatures between 233 - 250 K. Dust particles were collected in parallel on filters for offline cold stage ice nucleation experiments at 253 - 263 K. To help the interpretation of the results from the ice nucleation experiments the mineralogical composition of the dusts was investigated.We found that a higher ice nucleation activity in a given sample can be attributed at 253 K to the K-feldspar content present in this sample whereas at temperatures between 238 - 245 K it is attributed to the sum of feldspar and quartz content present. A high clay content on the other hand is associated with a lower ice nucleation activity of a sample. This confirms the importance of feldspar at T > 250 K and the role of quartz and feldspars determining the ice nucleation activities at lower T as found by earlier studies for monomineral dust surrogates. Furthermore, we find that milling may lead to a decrease in the ice nucleation ability of polymineral samples due to a change in mineralogical composition in the atmospherically relevant size fraction arising from the different hardness and cleavage of individual mineral phases. Comparison of our comprehensive data set to an existing desert dust parameterization confirms its applicability for climate models. Our results suggest that for an improved prediction of the ice nucleation ability of desert dust in the atmosphere, the modelling of emission and atmospheric transport of the feldspar and quartz mineral phases would be key while other minerals are only of minor importance.
Ein Finite-Volumen-Modell des differentiell geheizten rotierenden Annulus wird verwendet, um die spontane Schwerewellenabstrahlung durch die großskalige, von baroklinen Wellen beherrschte Strömung zu untersuchen. Bei diesem Vorgang bilden barokline Wellen und der durch sie abgelenkte und verzerrte Strahlstrom, die sich näherungsweise im hydrostatischen und geostrophischen Gleichgewicht befinden, durch ihre Dynamik Ungleichgewichte aus, die sich als Schwerewellen ausbreiten. Neben der Anregung von Schwerewellen durch Prozesse wie Gebirgsüberströmung, Konvektion und Frontogenese, bildet dieser Vorgang vermutlich eine weitere wichtige Quelle von Schwerewellen in der Atmosphäre. Anders als für orographisch und konvektiv angeregte Schwerewellen gibt es für die spontane Schwerewellenabstrahlung bislang keine befriedigende Parametrisierung in Wettervorhersage- und Klimamodellen, die diesen Prozess nicht auflösen können. Die Durchführung von Messungen zur spontanen Schwerewellenabstrahlung in der Atmosphäre ist üblicherweise sehr aufwendig, sodass die Untersuchung dieses Vorganges in einem wiederholbaren und steuerbaren Laborexperiment reizvoll erscheint. Ob dafür möglicherweise das Experiment des differentiell geheizten rotierenden Annulus infrage kommt, untersuchen wir mit einem eigens dafür entwickelten numerischen Modell, dessen Tauglichkeit wir zunächst im Rahmen einer Validierung durch den Vergleich mit Labormessungen überprüfen. Damit die Ergebnisse zur Schwerewellendynamik im Annulus auf die Atmosphäre übertragbar sind, verwenden wir eine neue, atmosphärenähnliche Annuluskonfiguration. Im Gegensatz zu den klassischen Annuluskonfigurationen ist in der neuen Konfiguration die Brunt-Väisälä-Frequenz größer als der Coriolis-Parameter, sodass die Schwerewellen ein ähnliches Ausbreitungsverhalten zeigen sollten wie in der Atmosphäre. Deutliche Hinweise auf eine Schwerewellenaktivität in der atmosphärenähnlichen Konfiguration geben die horizontale Geschwindigkeitsdivergenz und eine Normalmodenzerlegung der kleinräumigen Strukturen der simulierten Strömung. Um der Herkunft der beobachteten Schwerewellen auf den Grund zu gehen, zerlegen wir die Strömung in den schwerewellenfreien quasigeostrophischen Anteil und den schwerewellenenthaltenden ageostrophischen Anteil. Bereiche innerhalb der baroklinen Welle, in denen ein erhöhter spontaner Antrieb des ageostrophischen Anteils durch die quasigeostrophische Strömung beobachtet wird, fallen mit Bereichen erhöhter Schwerewellenaktivität zusammen. Dies deutet darauf hin, dass die spontane Schwerewellenabstrahlung auch im Annulus zum Schwerewellenfeld beiträgt, sodass dieses Experiment als Labormodell dieser Schwerewellenquelle für deren weitere Erforschung geeignet erscheint.
Processes occurring in the tropical upper troposphere and lower stratosphere (UT/LS) are of importance for the global climate, for the stratospheric dynamics and air chemistry, and they influence the global distribution of water vapour, trace gases and aerosols. The mechanisms underlying cloud formation and variability in the UT/LS are of scientific concern as these still are not adequately described and quantified by numerical models. Part of the reasons for this is the scarcity of detailed in-situ measurements in particular from the Tropical Transition Layer (TTL) within the UT/LS. In this contribution we provide measurements of particle number densities and the amounts of non-volatile particles in the submicron size range present in the UT/LS over Southern Brazil, West Africa, and Northern Australia. The data were collected in-situ on board of the Russian high altitude research aircraft M-55 "Geophysica" using the specialised COPAS (COndensation PArticle counting System) instrument during the TROCCINOX (Araçatuba, Brazil, February 2005), the SCOUT-O3 (Darwin, Australia, December 2005), and SCOUT-AMMA (Ouagadougou, Burkina Faso, August 2006) campaigns. The vertical profiles obtained are compared to those from previous measurements from the NASA DC-8 and NASA WB-57F over Costa Rica and other tropical locations between 1999 and 2007. The number density of the submicron particles as function of altitude was found to be remarkably constant (even back to 1987) over the tropical UT/LS altitude band such that a parameterisation suitable for models can be extracted from the measurements. At altitudes corresponding to potential temperatures above 430 K a slight increase of the number densities from 2005/2006 results from the data in comparison to the 1987 to 2007 measurements. The origins of this increase are unknown. By contrast the data from Northern hemispheric mid latitudes do not exhibit such an increase between 1999 and 2006. Vertical profiles of the non-volatile fraction of the submicron particles were also measured by a COPAS channel and are presented here. The resulting profiles of the non-volatile number density fraction show a pronounced maximum of 50% in the tropical TTL over Australia and West Africa. Below and above this fraction is much lower attaining values of 10% and smaller. In the lower stratosphere the fine particles mostly consist of sulphuric acid which is reflected in the low numbers of non-volatile residues measured by COPAS. Without detailed chemical composition measurements the reason for the increase of non-volatile particle fractions cannot yet be given. The long distance transfer flights to Brazil, Australia and West-Africa were executed during a time window of 17 months within a period of relative volcanic quiescence. Thus the data measured during these transfers represent a "snapshot picture" documenting the status of a significant part of the global UT/LS aerosol (with sizes below 1 μm) at low concentration levels 15 years after the last major (i.e., the 1991 Mount Pinatubo) eruption. The corresponding latitudinal distributions of the measured particle number densities are also presented in this paper in order to provide input on the UT/LS background aerosol for modelling purposes.
Processes occurring in the tropical upper troposphere (UT), the Tropical Transition Layer (TTL), and the lower stratosphere (LS) are of importance for the global climate, for stratospheric dynamics and air chemistry, and for their influence on the global distribution of water vapour, trace gases and aerosols. In this contribution we present aerosol and trace gas (in-situ) measurements from the tropical UT/LS over Southern Brazil, Northern Australia, and West Africa. The instruments were operated on board of the Russian high altitude research aircraft M-55 "Geophysica" and the DLR Falcon-20 during the campaigns TROCCINOX (Araçatuba, Brazil, February 2005), SCOUT-O3 (Darwin, Australia, December 2005), and SCOUT-AMMA (Ouagadougou, Burkina Faso, August 2006). The data cover submicron particle number densities and volatility from the COndensation PArticle counting System (COPAS), as well as relevant trace gases like N2O, ozone, and CO. We use these trace gas measurements to place the aerosol data into a broader atmospheric context. Also a juxtaposition of the submicron particle data with previous measurements over Costa Rica and other tropical locations between 1999 and 2007 (NASA DC-8 and NASA WB-57F) is provided. The submicron particle number densities, as a function of altitude, were found to be remarkably constant in the tropical UT/LS altitude band for the two decades after 1987. Thus, a parameterisation suitable for models can be extracted from these measurements. Compared to the average levels in the period between 1987 and 2007 a slight increase of particle abundances was found for 2005/2006 at altitudes with potential temperatures, theta, above 430 K. The origins of this increase are unknown except for increases measured during SCOUT-AMMA. Here the eruption of the Soufrière Hills volcano in the Caribbean caused elevated particle mixing ratios. The vertical profiles from Northern hemispheric mid-latitudes between 1999 and 2006 also are compact enough to derive a parameterisation. The tropical profiles all show a broad maximum of particle mixing ratios (between theta ~ 340 K and 390 K) which extends from below the TTL to above the thermal tropopause. Thus these particles are a "reservoir" for vertical transport into the stratosphere. The ratio of non-volatile particle number density to total particle number density was also measured by COPAS. The vertical profiles of this ratio have a maximum of 50% above 370 K over Australia and West Africa and a pronounced minimum directly below. Without detailed chemical composition measurements a reason for the increase of non-volatile particle fractions cannot yet be given. However, half of the particles from the tropical "reservoir" contain compounds other than sulphuric acid and water. Correlations of the measured aerosol mixing ratios with N2O and ozone exhibit compact relationships for the tropical data from SCOUT-AMMA, TROCCINOX, and SCOUT-O3. Correlations with CO are more scattered probably because of the connection to different pollution source regions. We provide additional data from the long distance transfer flights to the campaign sites in Brazil, Australia, and West-Africa. These were executed during a time window of 17 months within a period of relative volcanic quiescence. Thus the data represent a "snapshot picture" documenting the status of a significant part of the global UT/LS fine aerosol at low concentration levels 15 years after the last major (i.e., the 1991 Mount Pinatubo) eruption. The corresponding latitudinal distributions of the measured particle number densities are presented in this paper to provide data of the UT/LS background aerosol for modelling purposes.
Opportunities and challenges for paleoaltimetry in "small" orogens: insights from the European Alps
(2020)
Many stable isotope paleoaltimetry studies have focused on paleoelevation reconstructions of orogenic plateaus such as the Tibetan or Andean Plateaus. We address the opportunities and challenges of applying stable isotope paleoaltimetry to “smaller” orogens. We do this using a high‐resolution isotope tracking general circulation model (ECHAM5‐wiso) and explore the precipitation δ18O (δ18Op) signal of Cenozoic paleoclimate and topographic change in the European Alps. Results predict a maximum δ18Op change of 4–5‰ (relative to present day) during topographic development of the Alps. This signal of topographic change has the same magnitude as changes in δ18Op values resulting from Pliocene and Last Glacial Maximum global climatic change. Despite the similar magnitude of the isotopic signals resulting from topographic and paleoclimate changes, their spatial patterns across central Europe differ. Our results suggest that an integration of paleoclimate modeling, multiproxy approaches, and low‐elevation reference proxy records distal from an orogen improve topographic reconstructions.
Sesquiterpenes (C15H24) are semi-volatile organic compounds emitted by vegetation and are of interest in atmospheric research because they influence the oxidative capacity of the atmosphere and contribute to the formation of secondary organic aerosols. However, little is known about their emission pattern and no established parameterisation is available for global emission models. The aim of this study is to investigate a Central European spruce forest and its emission response to meteorological and environmental parameters, looking for a parameterisation that incorporates heat and oxidative stress as the main driving forces of the induced emissions. Therefore, a healthy ca. 80 yr old Norway spruce (Picea abies) tree was selected and a dynamical vegetation enclosure technique was applied from April to November 2011. The emissions clearly responded to temperature changes with small variations in the β-factor along the year (βspring = 0.09 ± 0.01, βsummer = 0.12 ± 0.02, βautumn = 0.11 ± 0.02). However, daily calculated values revealed a vast amount of variability in temperature dependencies ((0.02 ± 0.002) < β < (0.27 ± 0.04)) with no distinct seasonality.
By separating the complete dataset in 10 different ozone regimes, we found that in moderately or less polluted atmospheric conditions the main driving force of sesquiterpene emissions is the temperature, but when ambient ozone mixing ratios exceed a critical threshold of (36.6 ± 3.9) ppbv, the emissions become primarily correlated with ozone. Considering the complete dataset, cross correlation analysis resulted in highest correlation with ambient ozone mixing ratios (CCO3 = 0.63 ± 0.01; CCT = 0.47 ± 0.02 at t = 0 h for temperature) with a time shift 2–4 h prior to the emissions. An only temperature dependent algorithm was found to substantially underestimate the induced emissions (20% of the measured; R2 = 0.31). However, the addition of an ozone dependent term improved substantially the fitting between measured and modelled emissions (81% of the modelled emissions could be explained by the measurements; R2 = 0.63), providing confidence about the reliability of the suggested parameterisation for the spruce forest site investigated.
Sesquiterpenes (C15H24) are semi-volatile organic compounds emitted by vegetation and are of interest in atmospheric research because they influence the oxidative capacity of the atmosphere and contribute to the formation of secondary organic aerosols. However, little is known about their emission pattern and no established parameterization is available for global emission models. The aim of this study is to investigate a Central European spruce forest and its emission response to meteorological and environmental parameters, looking for a parameterization that incorporates heat and oxidative stress as the main driving forces of the induced emissions. Therefore, a healthy ca. 80 yr old Norway spruce (Picea abies) tree was selected and a dynamical vegetation enclosure technique was applied from April to November 2011. The emissions clearly responded to temperature changes with small variations in the β-factor along the year (βspring=0.09 ± 0.01, βsummer=0.12 ± 0.02, βautumn=0.11 ± 0.02). However, daily calculated values revealed a vast amount of variability in temperature dependencies ((0.02 ± 0.002)< β<(0.27 ± 0.04)) with no distinct seasonality.
By separating the complete dataset in 10 different ozone regimes, we found that in moderately or less polluted atmospheric conditions the main driving force of sesquiterpene emissions is the temperature, but when ambient ozone mixing ratios exceed a~critical threshold of (36.6 ± 3.9) ppbv, the emissions become primarily correlated with ozone. Considering the complete dataset, cross correlation analysis resulted in highest correlation with ambient ozone mixing ratios (CCO3=0.63 ± 0.01; CCT=0.47 ± 0.02 at t=0 h for temperature) with a time shift 2–4 h prior to the emissions. An only temperature dependent algorithm was found to substantially underestimate the induced emissions (20 % of the measured; R2=0.31). However, the addition of an ozone dependent term improved substantially the fitting between measured and modeled emissions (81 % of the measured; R2=0.63), providing confidence about the reliability of the suggested parameterization for the spruce forest site investigated.
The late Miocene palaeorecord provides evidence for a warmer and wetter climate than that of today, and there is uncertainty in the palaeo-CO2 record of at least 200 ppm. We present results from fully coupled atmosphere-ocean-vegetation simulations for the late Miocene that examine the relative roles of palaeogeography (topography and ice sheet geometry) and CO2 concentration in the determination of late Miocene climate through comprehensive terrestrial model-data comparisons. Assuming that these data accurately reflect the late Miocene climate, and that the late Miocene palaeogeographic reconstruction used in the model is robust, then results indicate that:
1. Both palaeogeography and atmospheric CO2 contribute to the proxy-derived precipitation differences between the late Miocene and modern reference climates. However these contributions exibit synergy and so do not add linearly.
2. The vast majority of the proxy-derived temperature differences between the late Miocene and modern reference climates can only be accounted for if we assume a palaeo-CO2 concentration towards the higher end of the range of estimates.
The Late Miocene (∼11.6–5.3 Ma) palaeorecord provides evidence for a warmer and wetter climate than that of today and there is uncertainty in the palaeo-CO2 record of at least 150 ppmv. We present results from fully coupled atmosphere-ocean-vegetation simulations for the Late Miocene that examine the relative roles of palaeogeography (topography and ice sheet geometry) and CO2 concentration in the determination of Late Miocene climate through comprehensive terrestrial model-data comparisons. Assuming that the data accurately reflects the Late Miocene climate, and that the Late Miocene palaeogeographic reconstruction used in the model is robust, then results indicate that the proxy-derived precipitation differences between the Late Miocene and modern can be largely accounted for by the palaeogeographic changes alone. However, the proxy-derived temperatures differences between the Late Miocene and modern can only begin to be accounted for if we assume a palaeo-CO2 concentration towards the higher end of the range of estimates.
In the original manuscript, Figs. 7–16 included fonts which were not correctly embedded in the file. As such, unless certain propriety software (ArcGIS) is installed on the viewing platform, the figures will appear corrupted. In this Corrigendum, Figs. 7–16 and their captions are reproduced with the fonts correctly embedded. Please find the correct figures below.
We have developed and characterized the novel PTR3, a proton transfer reaction-time-of-flight mass spectrometer (PTR-TOF) using a new gas inlet and an innovative reaction chamber design. The reaction chamber consists of a tripole operated with rf voltages generating an electric field only in the radial direction. An elevated electrical field is necessary to reduce clustering of primary hydronium (H3O+) and product ions with water molecules present in the sample gas. The axial movement of the ions is achieved by the sample gas flow only. Therefore, the new design allows a 30-fold longer reaction time and a 40-fold increase in pressure compared to standard PTR-TOF-MS. First calibration tests show sensitivities of up to 18000 counts per second/parts per billion and volume (cps/ppbv) at a mass resolution of >8000 m/Δm (fwhm). The new inlet using center-sampling through a critical orifice reduces wall losses of low volatility compounds. Therefore, the new PTR3 instrument is sensitive to VOC typically present in the ppbv range as well as to semivolatile organic compounds (SVOC) and even highly oxidized organic molecules (HOMs) present in the parts per quadrillion per volume (ppqv) range in the atmosphere.
Im Rahmen einer Zusammenarbeit zwischen der Thüringer Landesanstalt für Umwelt und Geologie und der Goethe-Universität Frankfurt fand in Kooperation mit dem Deutschen Wetterdienst (DWD) eine umfassende Studie zum konvektiven Unwetterpotential über Thüringen statt. Unwetterereignisse, die durch konvektive Prozesse in der Atmosphäre verursacht werden, besitzen ein nicht unerhebliches Schadenspotential, obwohl sie oftmals eine räumlich eng begrenzte Ausdehnung aufweisen. Aufgrund ihrer Charakteristik ist sowohl die Vorhersage solcher Ereignisse, als auch eine vollständige, systematische Erfassung für eine detaillierte Auswertung längerer Zeitreihen noch immer eine Herausforderung. Zusätzliches Interesse besteht in der Abschätzung der durch den Klimawandel abhängigen Entwicklung des zukünftigen Gefährdungspotentials konvektiver Unwetter. Für eine gezielte Untersuchung des Themenkomplexes ist eine Vielzahl unterschiedlicher Daten und Methoden verwendet worden. Mit Hilfe von Fernerkundungsdatensätzen wird ein räumlich differenziertes Gefährdungspotential über Thüringen nachgewiesen. Bedingt durch das Relief ist das Auftreten von Konvektion am häufigsten und intensivsten über dem südlichen Thüringer Wald und dessen Ostrand zu beobachten, während Nordthüringen eine deutlich geringere Aktivität solcher Unwetterereignisse aufweist. Eine Abschätzung mittels globaler Klimamodelle und daraus abgeleiteten Wetterlagen zeigt unter Berücksichtigung des RCP8.5 Klimaszenarios für die nahe Zukunft (2016-2045) eine Zunahme des Gefährdungspotentials durch konvektive Unwetter. Aufgrund des Anstiegs feuchter Wetterlagen (49 % auf 82 %) erhöht sich die Zunahme der Gefährdung für den Zeitraum 2071-2100 noch deutlicher. Im Vergleich zu diesem statistischen Ansatz nimmt die projizierte Gefährdung durch extreme Ereignisse erheblich zu (Faktor 6), wenn die Ergebnisse expliziter Simulationen konvektiver Ereignisse mit einem regionalen Klimamodell (mit horizontaler Gitterdistanz von 1 km) und eine Zunahme der Tage mit konvektiven Extremereignissen berücksichtigt werden. Ein Anstieg der Gefährdung durch konvektive Unwetter in der Zukunft ist wahrscheinlich. Eine Quantifizierung bleibt jedoch unsicher.
Staubwolken sind im Universum die Geburtsstätten neuer Sterne. Dort wiederholen sich Prozesse, die vor 4,56 Milliarden Jahren auch zur Entstehung unseres Sonnensystems geführt haben. Noch heute gibt es Zeugen aus dieser Zeit: Kometenstaub, Sternenstaub und interstellarer Staub. Die »Stardust-Mission« hat sie eingefangen, und Frankfurter Geowissenschaftler haben darin – dank modernster Labor-Analytik – erstaunliche Funde gemacht.
We conducted measurements of up to the five important short-lived brominated species in the marine boundary layer (MBL) of the mid-latitudes (List/Sylt, North Sea) in June 2009 and of the tropical Western Pacific during the TransBrom ship campaign in October 2009. For the one-week time series in List mean mixing ratios of 2.0, 1.1, 0.2, 0.1 ppt were analysed for CHBr3, CH2Br2, CHBr2Cl and CH2BrCl, with maxima of 5.8 and 1.6 ppt for the two main components CHBr3 and CH2Br2. Along the cruise track in the Western Pacific (between 41° N and 13° S) mean mixing ratios of 1.0, 0.9, 0.2, 0.1 and 0.1 ppt for CHBr3, CH2Br2, CHBrCl2, CHBr2Cl and CH2BrCl were determined. Air samples with coastal influence showed considerably higher mixing ratios than the samples with open ocean origin. Correlation analyses of the two datasets yielded strong linear relationships between the mixing ratios of four of the five species (except for CH2BrCl). Using a combined dataset from the two campaigns, rough estimates of the molar emission ratios between the correlated substances were derived as follows: 9/1/0.3/0.3 for CHBr3/CH2Br2/CHBrCl2/CHBr2Cl. Additional measurements were made in the tropical tropopause layer (TTL) above Teresina (Brazil, 5.07° S, 42.87° W) in June 2008, using balloon-borne cryogenic whole air sampling technique. Near the level of zero clear-sky net radiative heating (LZRH) at 14.8 km about 2.25 ppt organic bromine was bound to the five short-lived species, making up 13 % of total organic bromine (17.82 ppt). CH2Br2 (1.45 ppt) and CHBr3 (0.56 ppt) accounted for 90 % of the budget of short-lived compounds in that region. Near the tropopause (at 17.5 km) organic bromine from short-lived substances was reduced to 1.35 ppt, with 1.07 ppt and 0.12 ppt attributed to CH2Br2 and CHBr3 respectively.
We conducted measurements of the five important short-lived organic bromine species in the marine boundary layer (MBL). Measurements were made in the Northern Hemisphere mid-latitudes (Sylt Island, North Sea) in June 2009 and in the tropical Western Pacific during the TransBrom ship campaign in October 2009. For the one-week time series on Sylt Island, mean mixing ratios of CHBr3, CH2Br2, CHBr2Cl and CH2BrCl were 2.0, 1.1, 0.2, 0.1 ppt, respectively. We found maxima of 5.8 and 1.6 ppt for the two main components CHBr3 and CH2Br2. Along the cruise track in the Western Pacific (between 41° N and 13° S) we measured mean mixing ratios of 0.9, 0.9, 0.2, 0.1 and 0.1 ppt for CHBr3, CH2Br2, CHBrCl2, CHBr2Cl and CH2BrCl. Air samples with coastal influence showed considerably higher mixing ratios than the samples with open ocean origin. Correlation analyses of the two data sets yielded strong linear relationships between the mixing ratios of four of the five species (except for CH2BrCl). Using a combined data set from the two campaigns and a comparison with the results from two former studies, rough estimates of the molar emission ratios between the correlated substances were: 9/1/0.35/0.35 for CHBr3/CH2Br2/CHBrCl2/CHBr2Cl. Additional measurements were made in the tropical tropopause layer (TTL) above Teresina (Brazil, 5° S) in June 2008, using balloon-borne cryogenic whole air sampling technique. Near the level of zero clear-sky net radiative heating (LZRH) at 14.8 km about 2.25 ppt organic bromine was bound to the five short-lived species, making up 13% of total organic bromine (17.82 ppt). CH2Br2 (1.45 ppt) and CHBr3 (0.56 ppt) accounted for 90% of the budget of short-lived compounds in that region. Near the tropopause (at 17.5 km) organic bromine from these substances was reduced to 1.35 ppt, with 1.07 and 0.12 ppt attributed to CH2Br2 and CHBr3, respectively.
A satellite-based climate record of monthly mean surface solar irradiance (SIS) is investigated with regard to possible inhomogeneities in time. The data record is provided by the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) Satellite Application Facility on Climate Monitoring (CM SAF) for the period of 1983 to 2005, covering a disk area between ±70° in latitude and longitude. The Standard Normal Homogeneity Test (SNHT) and two other homogeneity tests are applied with and without the use of reference SIS data (from the Baseline Surface Radiation Network (BSRN) and from the ECMWF (European Centre for Medium-Range Weather Forecasts) ERA -Interim reanalysis. The focus is on the detection of break-like inhomogeneities, which may occur due to satellite or SIS retrieval algorithm changes. In comparison with the few suitable BSRN SIS observation series with limited extension in time (no data before 1992), the CM SAF SIS time series do not show significant inhomogeneities, even though slight discrepancies in the surface measurements appear. The investigation of the full CM SAF SIS domain reveal inhomogeneities related to most of the documented satellite and retrieval changes, but only for relatively small domain fractions (especially in mountainous desert-like areas in Africa). In these regions the retrieval algorithm is not capable of adjusting for the changes of the satellite instruments. For other areas, e.g., Europe, no such breaks in the time series are found. We conclude that the CM SAF SIS data record has to be further assessed and regionally homogenized before climate trend investigations can be conducted.
Convection-permitting models (CPMs) have proven their usefulness in representing precipitation on a sub-daily scale. However, investigations on sub-hourly scales are still lacking, even though these are the scales for which showers exhibit the most variability. A Lagrangian approach is implemented here to evaluate the representation of showers in a CPM, using the limited-area climate model COSMO-CLM. This approach consists of tracking 5‑min precipitation fields to retrieve different features of showers (e.g., temporal pattern, horizontal speed, lifetime). In total, 312 cases are simulated at a resolution of 0.01 ° over Central Germany, and among these cases, 78 are evaluated against a radar dataset. The model is able to represent most observed features for different types of convective cells. In addition, the CPM reproduced well the observed relationship between the precipitation characteristics and temperature indicating that the COSMO-CLM model is sophisticated enough to represent the climatological features of showers.
It is common practice to use a 30-year period to derive climatological values, as recommended by the World Meteorological Organization. However this convention relies on important assumptions, of which the validity can be examined by deriving the uncertainty inherent to using a limited time-period for deriving climatological values. In this study a new method, aiming at deriving this uncertainty, has been developed with an application to precipitation for a station in Europe (Westdorpe) and one in Africa (Gulu). The weather generator framework is used to produce synthetic daily precipitation time-series that can also be regarded as alternative climate realizations. The framework consists of an improved Markov model, which shows good performance in reproducing the 5-day precipitation variability. The sub-seasonal, seasonal and the inter-annual signals are introduced in the weather generator framework by including covariates. These covariates are derived from an empirical mode decomposition analysis with an improved stability and significance assessment. Introducing covariates was found to substantially improve the monthly precipitation variability for Gulu. From the weather generator, 1,000 synthetic time-series were produced. The divergence between these time-series demonstrates an uncertainty, inherent to using a 30-year period for mean precipitation, of 11 % for Westdorpe and 15 % for Gulu. The uncertainty for precipitation 10-year return levels was found to be 37 % for both sites.
Convection-permitting climate model are promising tools for improved representation of extremes, but the number of regions for which these models have been evaluated are still rather limited to make robust conclusions. In addition, an integrated interpretation of near-surface characteristics (typically temperature and precipitation) together with cloud properties is limited. The objective of this paper is to comprehensively evaluate the performance of a ‘state-of-the-art’ regional convection-permitting climate model for a mid-latitude coastal region with little orographic forcing. For this purpose, an 11-year integration with the COSMO-CLM model at Convection-Permitting Scale (CPS) using a grid spacing of 2.8 km was compared with in-situ and satellite-based observations of precipitation, temperature, cloud properties and radiation (both at the surface and the top of the atmosphere). CPS clearly improves the representation of precipitation, in especially the diurnal cycle, intensity and spatial distribution of hourly precipitation. Improvements in the representation of temperature are less obvious. In fact the CPS integration overestimates both low and high temperature extremes. The underlying cause for the overestimation of high temperature extremes was attributed to deficiencies in the cloud properties: The modelled cloud fraction is only 46 % whereas a cloud fraction of 65 % was observed. Surprisingly, the effect of this deficiency was less pronounced at the radiation balance at the top of the atmosphere due to a compensating error, in particular an overestimation of the reflectivity of clouds when they are present. Overall, a better representation of convective precipitation and a very good representation of the daily cycle in different cloud types were demonstrated. However, to overcome remaining deficiencies, additional efforts are necessary to improve cloud characteristics in CPS. This will be a challenging task due to compensating deficiencies that currently exist in ‘state-of-the-art’ models, yielding a good representation of average climate conditions. In the light of using the CPS models to study climate change it is necessary that these deficiencies are addressed in future research.
Aerosolpartikel sind in der Atmosphäre insbesondere für die Strahlungsübertragung und die Wolkenbildung von wichtiger Bedeutung. Aufgrund ihrer kurzen Lebensdauer, der Variabilität ihrer Quellen und Senken und ihrer Einbindung in den atmosphärischen Wasserkreislauf sind Partikel in allen ihren Eigenschaften sehr veränderlich. Die Zusammenhänge dieser Variabilität mit den meteorologischen Bedingungen und ihre Auswirkungen in der meteorologischen Anwendung sind bisher nur ungenügend durch Meßdaten belegt, so daß die Ergebnisse von Modellen, in denen die meteorologischen Wirkungen von Partikeln berücksichtigt werden (z.B. Klimamodelle), mit großen Unsicherheiten behaftet sind. Ziel dieser Arbeit war es, auf der Grundlage von Messungen einen Beitrag zur Charakterisierung der bodennahen troposphärischen Aerosolpartikel zu leisten. Im Hinblick auf die meteorologischen Anwendungen wurden die chemische Zusammensetzung und die Masse der Partikel in Abhängigkeit von ihrer Größe gemessen, da sie wesentliche Einflußgrößen für die Strahlungswirkung von Partikeln und die Wasserdampfkondensation in der Atmosphäre sind. Auf der Basis eines Datensatzes der physikalisch-chemischen Partikeleigenschaften und meteorologischer Meßgrößen wurde zunächst die Abhängigkeit der Partikeleigenschaften und ihrer Variabilität von den meteorologischen Umgebungsbedingungen analysiert sowie die Bedeutung der Variabilität der Partikeleigenschaften in der meteorologischen Anwendung untersucht. Dazu wurden Absorptionskoeffizienten der Partikel und Erwärmungsraten durch Absorption solarer Strahlung durch Partikel sowie das Wachstum der Partikel mit der relativen Feuchte in Abhängigkeit von ihrer chemischen Zusammensetzung berechnet. Die Messungen fanden während fünf drei- bis achtwöchiger Meßkampagnen 1991, 1993 und 1994 in Melpitz bei Torgau (Sachsen) und 1993 und 1994 auf dem Hohen Peißenberg (Oberbayern) statt. Mit einem Berner-Impaktor wurden die Partikel gesammelt. Es wurden die Konzentrationen der Gesamtmasse der Partikel sowie der Ionen in Abhängigkeit von ihrer Größe bestimmt. Die Rußkonzentrationen wurden mit einem Aethalometer gemessen. Parallel zu den Partikelmessungen fanden Messungen von Temperatur, relativer Feuchte, Windgeschwindigkeit, Windrichtung, Globalstrahlung und diffuser Himmelsstrahlung statt. Die Messungen liefern folgende Ergebnisse: Bei allen Messungen waren Nitrat, Sulfat und Ammonium die Hauptkomponenten der kleinen Partikel, und die Massenkonzentrationen der kleinen Partikel (0,04 µm < aed < 1,72 µm) waren wesentlich größer als die der großen Partikel (1,72 µm < aed < 21µm). Die Partikel sind also überwiegend anthropogener Herkunft. Die großen Partikel enthielten zusätzlich Natrium und Kalzium, lediglich bei einzelnen Messungen in Melpitz wurde auch Chlorid als Hinweis auf Seesalzpartikel gefunden. Die Massenkonzentrationen aller Partikelbestandteile waren in Melpitz in der Regel etwas größer als auf dem Hohen Peißenberg, da die Partikelkonzentrationen mit zunehmender Höhe abnehmen und da Melpitz näher an Ballungsräumen liegt als der Hohe Peißenberg. Die Unterschiede zwischen den verschiedenen Meßkampagnen an einem Ort sind jedoch größer als die zwischen den beiden Orten. Die Variabilität sowohl der Massenkonzentrationen der Partikelbestandteile als auch der Gesamtmasse liegt im Bereich von zwei Größenordnungen und ist damit wesentlich größer als die Unterschiede zwischen den Meßkampagnen. Der mittlere Anteil der löslichen Masse an der Gesamtmasse beträgt für die kleinen Partikel 57 %, für die großen 30 %. Dieser Anteil variiert sehr stark (10-100 % bzw. 5-80 %). Ruß hat einen mittleren Anteil von 5 % an der Gesamtmasse (1-18 %). Wesentliche Parameter, die zu Veränderungen der Partikeleigenschaften führen, sind: - Luftmassen unterschiedlicher Herkunft und Geschichte - Veränderungen der Mächtigkeit und Struktur der atmosphärischen Grenzschicht - Emissionen lokaler Quellen - lokale meteorologische Parameter (Temperatur, Windrichtung, -geschwindigkeit) Die unterschiedliche Häufigkeit und Ausprägung dieser Einflußfaktoren führt zu Unterschieden zwischen den Ergebnissen der einzelnen Meßkampagnen. Die einzelnen Faktoren sind nicht voneinander unabhängig, da durch die großräumige Wettersituation und die Luftmassen die Ausprägung der lokalen Parameter bestimmt wird. Um eine Zusammenfassung von Messungen unter vergleichbaren meteorologischen Bedingungen zu erreichen, wurde eine Klassifikation der Daten auf der Basis von Rückwärtstrajektorien vorgenommen. Es wurden fünf Klassen unterschieden: vier Klassen umfassen Richtungssektoren mit jeweils 90 ° um die Haupthimmelsrichtungen (Nord, Ost, Süd, West), einer fünften (X) werden kurze Trajektorien zugeordnet. Dieser Ansatz wurde gewählt, weil ähnliche Luftmassen und damit meteorologische Bedingungen hinsichtlich Temperatur, Feuchte, Stabilität und Luftbeimengungen meistens durch ähnliche Trajektorien gekennzeichnet sind, die eine Aussage über die Herkunft und den Weg der Luft ermöglichen, die wiederum für die Ausprägung der Partikeleigenschaften maßgeblich sind. Eine weitere Unterteilung nach Tageszeiten (morgens, mittags, abends) wurde vorgenommen, da einige Meßgrößen deutliche Tagesgänge zeigten. Die Ergebnisse lassen sich wie folgt zusammenfassen: Die Klassifikation der meteorologischen Meßgrößen liefert sowohl im Hinblick auf die Charakterisitika der Trajektorienklassen (Herkunft der Luft) als auch für die Tagesgänge meteorologisch sinnvolle Ergebnisse. Die Lage der Stationen in einer Ebene und auf einem Berg führt zu einer unterschiedlichen Ausprägung von Tagesgängen der Temperatur und der Windgeschwindigkeit besonders während stabiler Hochdruckwetterlagen. Es zeigt sich, daß bedingt durch die Entwicklung der Grenzschicht auf dem Hohen Peißenberg vor allem bei Hochdruckwetterlagen im Tagesverlauf in zwei verschiedenen Atmosphärenschichten gemessen wird. Die starke Streuung der lokalen Windrichtungen innerhalb einer Trajektorienklasse führt dazu, daß der Einfluß lokaler bzw. regionaler Quellen durch die Klassifikation nur bedingt erfaßt wird, und liefert einen Hinweis auf die lokale Wetterlage. Die Klassifikation der Partikelmeßdaten liefert meteorologisch sinnvolle Ergebnisse, da die Konzentrationsunterschiede zwischen den einzelnen Klassen mit der Wetterlage und dem Einfluß regionaler Quellen zu begründen waren. Die Absolutwerte ließen sich allerdings nicht vergleichen, und es wurden im Detail meßkampagnenspezifische Begründungen gefunden. Es ergab sich jedoch für alle Meßkampagnen die Unterteilung in Klassen mit antizyklonalen Wetterlagen und kontinentaler Luft mit hohen Konzentrationen (Klassen Ost, Süd, West) und zyklonalen Wetterlagen und maritimer Luft mit geringeren Konzentrationen (Klassen Nord, West). Abweichungen von dieser Einteilung waren vor allem mit der geographischen Lage der Meßorte zu begründen. Ausgeprägte Tagesgänge mit Maxima bei den Morgenmessungen ergaben sich nur für Nitrat, bei einigen Messungen auch für Chlorid in den kleinen Partikeln durch temperaturabhängige Gleichgewichtsreaktionen instabiler Partikelkomponenten mit der Gasphase sowie für Ruß durch die Anreicherung von Emissionen lokaler Quellen bei geringer Grenzschichthöhe. Während sich die mittleren absoluten Konzentrationen in den einzelnen Klassen erheblich unterscheiden, ist die mittlere relative chemische Zusammensetzung der Partikel in allen Klassen ähnlich; die Variabilität der Anteile ist aber ebenfalls sehr groß. Mit Ausnahme der Advektion von Seesalzpartikeln sowie der temperaturbedingten Verschiebung der Anteile von Nitrat und Sulfat, lassen sich Unterschiede zwischen den Klassen nicht mit den durch die Klassifikation erfaßten Einflußfaktoren oder geographischen Besonderheiten begründen. Durch die Klassifikation nimmt die Variabilität sowohl der meteorologischen Meßgrößen als auch der Partikeleigenschaften ab. Für die meteorologischen Meßgrößen verringert sich die Variabilität durch die Klassifikation nach Trajektorien weniger als durch die nach Tageszeiten, für die Konzentrationen der Partikelbestandteile und der Masse führt hingegen die Klassifikation nach Trajektorien zu einer größeren Verminderung der Variabilität als die nach Tageszeiten. Die Anwendung beider Klassifikationskriterien führt zu einer Abnahme der Variabilität um im Mittel 55 % für die meteorologischen Meßgrößen und um 50 % bzw. 25 % für die Konzentrationen der Bestandteile und der Masse der kleinen bzw. der großen Partikel. Die Variabilität der Werte in einer Klasse bleibt jedoch auch nach Klassifikation größer als Unterschiede zwischen den Klassen. Sie wird vor allem durch die spezifische meteorologische Situation bedingt. Um die Auswirkungen der Variabilität der Partikeleigenschaften in meteorologischen Anwendungen abschätzen zu können, wurden aus den Meßdaten der Absorptionskoeffizient der Partikel und die daraus resultierenden Erwärmungsraten sowie das Partikelwachstum mit der relativen Feuchte berechnet und wie die Meßdaten klassifiziert. Die Ergebnisse lassen sich folgendermaßen zusammenfassen: Für die Absorptionskoeffizienten der trockenen Partikel wurden Werte zwischen 0,1·10-6/m und 97·10-6/m berechnet. Für die beiden Meßkampagnen im Herbst (Melpitz 1993 und 1994) ergaben sich etwa um den Faktor 2 größere mittlere Absorptionskoeffizienten als für die Meßkampagnen im Sommer, die maximalen Absorptionskoeffizienten waren in Melpitz aufgrund der starken lokalen Quellen um den Faktor 2-3 größer als auf dem Hohen Peißenberg. Für die maximalen Erwärmungsraten wurden Werte zwischen 0,003 und 0,128 K/h, für die Gesamterwärmung über die Tageslichtperiode zwischen 0,02 K und 0,81 K berechnet. Die Partikel liefern in Abhängigkeit von den Umgebungsbedingungen selbst während Meßkampagnen an zwei ländlichen Orten in Mitteleuropa einen vernachlässigbar geringen bis deutlichen Beitrag zum Strahlungsantrieb. In Melpitz waren sowohl die maximalen Erwärmungsraten als auch die Gesamterwärmung im Mittel um den Faktor 1,5 geringer als auf dem Hohen Peißenberg, da die maximalen Absorptionskoeffizienten zu einer Zeit bestimmt wurden, als das Strahlungsangebot noch gering war, während auf dem Hohen Peißenberg die Maxima von Absorptionskoeffizient und Strahlungsangebot zeitlich näher zusammenliegen. Die Klassifikation nach Rückwärtstrajektorien ergab deutliche Unterschiede (Faktor 3-5) zwischen den einzelnen Klassen, da in Klassen mit den höchsten Rußkonzentrationen auch das Strahlungsangebot am höchsten war und in Klassen mit niedrigen Rußkonzentrationen meistens starke Bewölkung vorherrschte. Zwischen maximaler Erwärmungsrate und Gesamterwärmung über die Tageslichtperiode wird ein linearer Zusammenhang gefunden, der sich aber aufgrund der verschiedenen Tagesgänge des Absorptionskoeffizienten für die Meßkampagnen in Melpitz und auf dem Hohen Peißenberg unterscheidet. Sowohl für den exponentiellen Massenzuwachskoeffizienten bei unendlicher Verdünnung als auch für das Partikelwachstum bei fester relativer Feuchte ergeben sich im Mittel nur geringe Unterschiede zwischen kleinen und großen Partikeln sowie einzelnen Klassen durch die chemische Zusammensetzung des wasserlöslichen Anteils der Partikel. Unterschiede sind vielmehr durch den Anteil der wasserlöslichen Masse an der Gesamtmasse bedingt. Es ergibt sich ein linearer Zusammenhang zwischen dem exponentiellen Massenzuwachskoeffizienten bei unendlicher Verdünnung und dem Anteil der wasserlöslichen Masse an der Gesamtmasse der Partikel. Die Unterschiede zwischen den einzelnen Klassen lassen sich nicht auf einzelne meteorologische oder geographische Einflußfaktoren zurückführen. Sowohl für die Absorption solarer Strahlung als auch für das Wachstum der Partikel mit der relativen Feuchte ist die Variabilität der abgeleiteten Größen geringer als die der Ausgangsgrößen, sie ist aber immer noch mindestens so groß wie die Unterschiede zwischen den einzelnen Klassen. Zusammenfassend läßt sich festhalten, daß in dieser Arbeit ein Datensatz aus Messungen von meteorologischen Parametern und Partikeleigenschaften zusammengestellt wurde, der zusammen mit der Klassifikationsmethode nach Rückwärtstrajektorien und Tageszeiten eine Untersuchung der Zusammenhänge zwischen der Variabilität der Meßgrößen und den meteorologischen Bedingungen ermöglicht und eine Abschätzung der Auswirkungen der Variabilität der Partikeleigenschaften, insbesondere der chemischen Zusammensetzung, in meteorologischen Anwendungen zuläßt. Der Klassifikationsansatz nach Rückwärtstrajektorien ist prinzipiell geeignet, um die Abhängigkeit der Partikeleigenschaften von den meteorologischen Bedingungen zu beschreiben. Es ist jedoch nicht möglich, einen Einflußfaktor als den wichtigsten hervorzuheben oder sogar quantitative Beziehungen zwischen Partikeleigenschaften und meteorologischen Parametern herzustellen. Die Herkunft der Luft liefert einen Hinweis auf die zu erwartenden meteorologischen Bedingungen und Partikeleigenschaften, die lokale meteorologische Situation bestimmt jedoch die genaue Ausprägung der Meßgrößen. Eine Berücksichtigung des Einflusses der lokalen Wetterlage sowie lokaler bzw. regionaler Quellen könnte durch die Einbeziehung der Windrichtung vorgenommen werden. Auf der Basis längerer Meßreihen sollte überprüft werden, ob die Unterteilung in fünf Trajektorienklassen modifiziert werden muß. Der große Einfluß der spezifischen Wetterlage auf die Meßergebnisse führt dazu, daß die Ergebnisse von Meßkampagnen weder für einen längeren Zeitraum noch für ein größeres Gebiet repräsentativ sein können. Ebenso ist die Verwendung von Mittelwerten über längere Zeiträume ist nicht sinnvoll, da die Variabilität der Meßgrößen während eines Tages sowie von Tag zu Tag sehr groß ist. Aufgrund der komplexen Zusammenhänge zwischen Partikeleigenschaften und meteorologischen Bedingungen erscheint es unbedingt nötig, längere Meßreihen aller wichtigen Aerosoleigenschaften durchzuführen, damit statistisch belastbare Daten über eine hinreichend große Zahl von Messungen unter verschiedensten meteorologischen Bedingungen zu allen Jahreszeiten vorliegen, die Aussagen über Zusammenhänge mit Witterungsbedingungen, Tagesgänge, Jahresgänge aber auch die Vertikalverteilung der Partikeleigenschaften zulassen. Dabei ist es wichtig, alle interessierenden Größen gleichzeitig zu messen, da nur dann eine Untersuchung des Einflusses der Variabilität verschiedener Parameter auf die für die Anwendung wichtigen Größen möglich ist.
In old and heavily weathered soils, the availability of P might be so small that the primary production of plants is limited. However, plants have evolved several mechanisms to actively take up P from the soil or mine it to overcome this limitation. These mechanisms involve the active uptake of P mediated by mycorrhiza, biotic de-occlusion through root clusters, and the biotic enhancement of weathering through root exudation. The objective of this paper is to investigate how and where these processes contribute to alleviate P limitation on primary productivity. To do so, we propose a process-based model accounting for the major processes of the carbon, water, and P cycle including chemical weathering at the global scale. We use simulation experiments to assess the relative importance of the different uptake mechanisms to alleviate P limitation on biomass production. Implementing P limitation on biomass synthesis allows the assessment of the efficiencies of biomass production across different ecosystems.
We find that active P-uptake is an essential mechanism for sustaining P availability on long time scales, whereas biotic de-occlusion might serve as a buffer on time scales shorter than 10 000 yr. Although active P uptake is essential for reducing P losses by leaching, humid lowland soils reach P limitation after around 100 000 yr of soil evolution. Given the generalized modeling framework, our model results compare reasonably with observed or independently estimated patterns and ranges of P concentrations in soils and vegetation. Furthermore, our simulations suggest that P limitation might be an important driver of biomass production efficiency (the fraction of the gross primary productivity used for biomass growth), and that vegetation on older soils becomes P-limited leading to a smaller biomass production efficiency.
With this study, we provide a theoretical basis for investigating the responses of terrestrial ecosystems to P availability linking geological and ecological time scales under different environmental settings.
In old and heavily weathered soils, the availability of P might be so small that the primary production of plants is limited. However, plants have evolved several mechanisms to actively take up P from the soil or mine it to overcome this limitation. These mechanisms involve the active uptake of P mediated by mycorrhiza, biotic de-occlusion through root clusters, and the biotic enhancement of weathering through root exudation. The objective of this paper is to investigate how and where these processes contribute to alleviate P limitation on primary productivity. To do so, we propose a process-based model accounting for the major processes of the carbon, water, and P cycles including chemical weathering at the global scale. Implementing P limitation on biomass synthesis allows the assessment of the efficiencies of biomass production across different ecosystems. We use simulation experiments to assess the relative importance of the different uptake mechanisms to alleviate P limitation on biomass production. We find that active P uptake is an essential mechanism for sustaining P availability on long timescales, whereas biotic de-occlusion might serve as a buffer on timescales shorter than 10 000 yr. Although active P uptake is essential for reducing P losses by leaching, humid lowland soils reach P limitation after around 100 000 yr of soil evolution. Given the generalized modelling framework, our model results compare reasonably with observed or independently estimated patterns and ranges of P concentrations in soils and vegetation. Furthermore, our simulations suggest that P limitation might be an important driver of biomass production efficiency (the fraction of the gross primary productivity used for biomass growth), and that vegetation on old soils has a smaller biomass production rate when P becomes limiting. With this study, we provide a theoretical basis for investigating the responses of terrestrial ecosystems to P availability linking geological and ecological timescales under different environmental settings.
Als Voraussetzung für die experimentellen Arbeiten wurde am Mineralogischen Institut in Frankfurt eine Hochdruckpresse mit einer Multi-Anvil-Apparatur vom Walker-Typ aufgebaut und kalibriert. Diese Arbeiten nahmen einen beträchtlichen Teil der Promotionszeit ein. In einer Reihe von Hochdruck-Experimenten wurde dann die maximale Löslichkeit von Aluminium und den Seltenerd-Elementen Lanthan, Gadolinium und Lutetium in den Phasen des CaSiO3-Systems im Druckbereich zwischen 2.0 und 13.0 GPa untersucht. Unsere Experimente ergaben eine Zunahme der maximalen Löslichkeit mit steigendem Druck, von Wollastonit über Ca-Walstromit, Larnit + Si-Titanit bis Ca-Perowskit. Ca-Perowskit zeigt extrem hohe SEE-Konzentrationen mit einem Maximum bei den mittleren SEE. In den anderen Phasen nimmt die Löslichkeit mit zunehmender Kompatibilität der SEE zu. Innerhalb der Stabilitätsfelder zeigte sich keine signifikante Druck- oder Temperatur-Abhängigkeit der maximalen Löslichkeit. Anhand der Mikrosonden-Analysen konnte gezeigt werden, dass der Einbau von Al und SEE in Ca-Walstromit nicht über eine gekoppelte Substitution erfolgt, sondern wahrscheinlich über eine Defektstruktur. Dies deckt sich mit unseren TEM-Untersuchungen an diesen synthetischen Produkten, die eine hohe Dichte an planaren Baufehlern mit leicht erhöhten SEE-Konzentrationen ergaben. In allen Ca-Silikat-Phasen lag die maximale Löslichkeit der Seltenen Erden höher als die Konzentration in natürlichen Proben. Damit steht fest, dass die in Einschlüssen gemessenen SEE-Gehalte „primär“ sind und sich nicht durch etwaige Entmischungen im Zuge einer Anpassung der Kristallstruktur an die veränderten P,T-Bedingungen verändert haben. Entmischungen in Form einer SEE-reichen Phase würden eine an LSEE extrem angereicherte Quelle voraussetzen. Ein Vergleich unserer Subsolidus-Experimente mit CaSiO3-Einschlüssen in Diamanten aus Guinea zeigt, dass einige mit bis zu 0.13 Gew.% Al2O3 an Aluminium gesättigt sind. Diese Tatsache ist besonders interessant bei der Interpretation Alhaltiger Einschlussphasen. Neben absoluten Spurenelement-Konzentrationen sind Verteilungskoeffizienten äußerst wertvolle Hilfsmittel bei der Bewertung natürlicher Proben. Die in der Literatur bestehenden Datensätze wurden mit unseren Kristall/Schmelz-Verteilungskoeffizienten bzw. Verteilungskoeffizienten zwischen Ca-Silikatphasen erweitert. Verteilungskoeffizienten der Seltenerd-Elemente zwischen Ca-Walstromit und Karbonat sind um eine Größenordnung höher als Ca-Walstromit/Schmelz-Verteilungskoeffizienten und zeigen eine größere Steigung zwischen den MSEE und den SSEE (Lu/Gd). Die Seltenen Erden verhalten sich sowohl in Larnit als auch in Si-Titanit inkompatibel, wobei DX/L La für Larnit etwa 0.1 und für CaSi2O5 etwa 0.002 ist, d.h. auch, dass die LSEE im Vergleich zu Si-Titanit bevorzugt in Larnit eingebaut werden. Al verhält sich in Si-Titanit Zusammenfassung 147 kompatibel (DX/LAl=4) und in Larnit leicht inkompatibel. Diese Ergebnisse decken sich mit Analysen an natürlichen Proben. Die SEE-Verteilungskoeffizienten zwischen Ca-Perowskit und Schmelze liegen mit Ausnahme von La über eins und zeigen in Übereinstimmung mit Literaturdaten ein Maximum bei Gd. Für Granat konnte gezeigt werden, dass der Einbau der SEE und Si in MgO-haltigen Kristallen in Abhängigkeit von Druck und Startzusammensetzung über eine Ca SEE2 Mg2 Si3O12- Komponente bzw. über eine Ca3 MgSi Si3O12-Komponente mit 6-fach koordiniertem Silizium erfolgt. In zahlreichen Experimenten kristallisierte eine neue Ca-SEE-Silikat-Phase mit Feldspat-Stöchiometrie. Dabei handelt es sich offenbar um ein Mischkristallsystem mit einem Endglied, in das vorwiegend die leichten SEE eingebaut werden und in einem zweiten mit vorwiegend schweren SEE. Ab einem Druck von etwa 10.0 GPa trennt ein Solvus die beiden Endglieder voneinander. In der Literatur ist bisher nur ein CaLa2Si2O8-Endglied beschrieben worden. In einigen Experimenten mit P und Li wurde zusätzlich untersucht, ob diese Elemente zur Rekonstruktion der Bildungsbedingungen von Diamanten verwendet werden können. Dabei zeigte sich, dass die max. Löslichkeit von Li in CaSiO3 näher an den natürlichen Probenzusammensetzungen liegt und damit möglicherweise Potential für die Rekonstruktion von Bildungsbedingungen hat. In einem weiteren Teil dieser Arbeit wurde die Kinetik retrograder Reaktionen im CaSiO3-System untersucht. Die für die In-Situ-Experimente mit Synchrotron-Strahlung notwendigen Versuchsaufbauten wurden von uns entwickelt und die entsprechenden Entwicklungsschritte und technischen Probleme ausführlich beschrieben. Anhand von Entlastungsexperimenten wurden die Disproportionierung von Ca-Perowskit zu Larnit + Si-Titanit und die Rekombination zu Ca-Walstromit bei unterschiedlichen Temperaturen und unter dem Einfluss von Wasser untersucht. Aufgrund der wenigen verwertbaren Daten, die uns vorliegen, konnten zwar keine Aktivierungsenergien berechnet werden, es sind aber aufgrund unser Beobachtungen folgende Feststellungen zu treffen: Die Reaktion von Ca-Perowskit zu Larnit + Si-Titanit erfolgt bei gleicher Temperatur offenbar um Größenordnungen schneller als die sich bei niedrigen Drucken anschließende Rekombination zu Ca-Walstromit. Dies deckt sich mit Beobachtungen an natürlichen Proben, bei denen Larnit und Si-Titanit teilweise unvollständig zu Ca-Walstromit reagierten. Dadurch erscheint es eher unwahrscheinlich, dass amorphes CaSiO3 in Diamanten ein direktes Umwandlungsprodukt von Ca-Perowskit ist. Aber auch für die in der Literatur beschriebene Amorphisierung von Ca-Walstromit-Einschlüssen (Stachel 2000) noch innerhalb des umgebenden Diamanten ließ sich durch unsere In-Situ-Entlastungsexperimente nicht stützen. Eine Amorphisierung von Ca-Walstromit beobachteten wir nur bei einer Untersuchung am TEM, wo die Phase sehr instabil war und selbst in einem Kryohalter rasch unter dem Einfluss der Elektronenstrahls amorphisierte. Die Beugungs-Spektren, die nach einer Druckentlastung im Ca-Walstromit-Stabilitätsfeld aufgenommen wurden, unterschieden sich trotz der CaSiO3-Chemie der neu gebildeten Phase deutlich von unseren Ca-Walstromit-Referenz-Spektren, so dass die Umwandlung möglicherweise über eine metastabile Zwischenstufe erfolgt. Vor dem Hintergrund von unterschiedlichen, in der Literatur beschriebenen Strukturtypen von Ca-Walstromit wäre eine systematische Untersuchung der Struktur innerhalb des gesamten Stabilitätsfeldes wichtig.
The timing and duration of leaf deployment strongly regulate earth-atmosphere interactions and biotic processes. Leaf dynamics therefore have major implications for life on earth, including the global energy balance, carbon and water cycles, feedbacks to climate, species extinction risk and agriculture. Evidence of shifts in the timing of leaf deployment and senescence (leaf phenology) as a result of climate change has been accumulating over the past decades, particularly in relation to spring phenology in the northern hemisphere. However, leaf phenological change in other parts of the world has received less attention. This thesis quantifies global phenological change over the past three decades using remotely sensed data. Phenological change was found to be widespread and severe, also in the southern hemisphere. While the detected change testifies of the phenological plasticity of many plant species, it is not clear if the duration of leaf deployment (leaf habit) is equally sensitive to environmental change. Since evergreen and deciduous leaf habits are often distinctly sorted along environmental gradients, ecologists have hypothesised that these patterns result from natural selection for an optimal leaf habit, under a given environmental regime. Such evolutionary convergence can be examined by testing if the physiological niche that is occupied by a particular leaf habit (evergreen or deciduous) is similar among regions with distinct evolutionary histories. Using a process-based model of plant growth and a constructed map of evergreen and deciduous vegetation, the physiological niche of leaf habits was quantified in four global biogeographic realms. Substantial niche overlap was found between the same leaf habit in different realms, suggesting evolutionary convergence of the physiological niche. This implies a sensitivity of leaf habit to environmental change, as environmental variables determine the geographic space where the physiological niche allows a positive carbon balance, and therefore occurrence of the leaf habit. Since the physiological niche consists of the integrated effects of physiological traits and trade-offs, environmental dependencies and leaf habit and phenology, an understanding of the carbon economy of individual plants requires decomposing the physiological niche into its components. Using empirical data on leaf phenology, leaf habit and physiological processes from woody species in a seasonally dry African savanna, a simple carbon balance model was parametrised. Carbon gain varied considerably between species as a result of substantial variation in leaf habit, leaf phenology and physiological traits. The multiple lines of evidence in this thesis therefore suggest that, while convergent selective forces may determine the dominant leaf habit in a particular environment, inter-specific variation is substantial, potentially as a consequence of historical contingencies or competitive interactions.
Soil water potential is crucial to plant transpiration and thus to carbon cycling and biosphere–atmosphere interactions, yet it is difficult to measure in the field. Volumetric and gravimetric water contents are easy and cheap to measure in the field, but can be a poor proxy of plant-available water. Soil water content can be transformed to water potential using soil moisture retention curves. We provide empirically derived soil moisture retention curves for seven soil types in the Kruger National Park, South Africa. Site-specific curves produced excellent estimates of soil water potential from soil water content values. Curves from soils derived from the same geological substrate were similar, potentially allowing for the use of one curve for basalt soils and another for granite soils. It is anticipated that this dataset will help hydrologists and ecophysiologists understand water dynamics, carbon cycling and biosphere–atmosphere interactions under current and changing climatic conditions in the region.
Das Ziel dieser Arbeit wurde eingangs über den Begriff der erweiterten Schließung der optischen und mikrophysikalischen Eigenschaften der Partikel definiert. Hierunter versteht man das Zusammenfügen von verschiedenen Messungen zu einem konsistenten Bild der betrachteten Partikeleigenschaften. Darüber hinaus sollen die Messungen auch in anderen Teilgebieten der Aerosolphysik verwendbar sein, um so das konsistente Bild zu erweitern. Dieses so umschriebene Ziel konnte für die mikrophysikalischen und optischen Messergebnisse, die während des LACE 98 Experimentes, einem vom Bundesministerium für Forschung und Bildung (Bmb f) geförderten Schließungsexperiment, in Lindenberg (Brandenburg) rund 50 km südöstlich von Berlin im Juli und August 1998 erfasst wurden, erreicht werden. Die Messungen wurden erfolgreich zu einem konsistenten Datensatz und einem "Bild" der Partikeleigenschaften zusammengefügt. Unter dem Begriff "Bild" subsummiert sich hierbei nicht nur eine Charakterisierung der Variabilität und Abhängigkeit der Partikeleigenschaften, z.B. von der rel. Luftfeuchte, sondern darüber hinaus auch eine Charakterisierung der Beeinflussung verschiedener von den Eigenschaften der Partikel abhängiger Größen. Hierzu zählen Strahlungshaushaltsgrößen (Erwärmungsrate der Luft durch Absorption solarer Strahlung und die Volumenabsorption solarer Strahlung durch Partikel), wolkenphysikalische Größen (maximale Übersättigung der Wolkenluft während der Wolkenentstehung und Anzahlkonzentration der wachsenden Wolkentropfen), die massengewichtete mittlere Sedimentationsgeschwindigkeit von Partikeln und nicht zuletzt gesundheitsrelevante Größen, wie z.B. die vom Menschen beim Atmen aufgenommene und eingelagerte Partikelmasse. Nachfolgende Zusammenstellung soll nochmals die erzielten Ergebnisse zusammenfassen. Für eine detaillierte Darstellung der in den einzelnen Kapiteln erzielten Ergebnisse soll hier nur auf die jeweiligen Zusammenfassungen der einzelnen Kapitel verwiesen werden. . Im Rahmen der direkten Schließung, wurden unterschiedliche Verfahren zur Bestimmung der optischen Eigenschaften der Partikel erfolgreich miteinander verglichen. Beteiligt waren bei diesem Vergleich folgende Methoden: Partikel im trockenen Zustand: -- Aerosolphotometer (alle optischen Eigenschaften, ) -- Nephelometer (Streukoeffizient) -- PSAP (Absorptionskoeffizient) -- IPMethode (Absorptionskoeffizient) -- Telephotometer (Extinktionskoeffizient) Partikel bei Umgebungsfeuchte: -- Telephotometer (Extinktionskoeffizient) -- horizontales Lidar (Extinktionskoeffizient) Es zeigte sich, dass sich das Aerosolphotometer mit seinem schon aus der Theorie des Messverfahrens her begründeten konsistenten Satz aller optischen Eigenschaften als Referenzmethode während LACE 98 bewährte. Mit seiner Hilfe konnte nun auch die Gültigkeit einer empirischen Korrektur des PSAP nach Bond et al. [1999] für natürliche Aerosolpartikel bestätigt werden. Dem Anwender dieses Gerätes, das mit einer hervorragenden zeitlichen Auflösung von wenigen Minuten den Absorptionskoeffizienten bestimmt, stehen somit zwei unabhängig voneinander gewonnene Kalibrierungsfunktionen zur Verfügung, die innerhalb der Fehlergrenzen auch mit einander im Einklang stehen. . Im Rahmen der indirekten Schließung wurde ein Modell entwickelt, mit dem auf Basis eines Kugelschalenmodells der Partikel aus Messungen der mikrophysikalischen Eigenschaften der Partikel den Extinktions, den Streu- und den Absorptionskoeffizienten sowie die Single Scattering Albedo berechnet wurden. Mit Hilfe dieses Modells wurde der Feuchteeffekt der oben genannten optischen Eigenschaften berechnet. Mit diesen Ergebnissen konnten dann die Messwerte des Telephotometers feuchtekorrigiert, und mit den Messungen des Aerosolphotometers verglichen werden, wo bei eine gute Übereinstimmung der Messreihen festgestellt werden konnte. Die beobachteten Unterschiede konnten auf Ernteaktivitäten, die nur die Messungen des Telephotometers beeinflussten, zurückgeführt werden. Ein Vergleich der mit Hilfe des Modells auch direkt berechenbaren optischen Eigenschaften mit den direkten Messwerten der beteiligten Verfahren fiel ebenfalls positiv aus. Anhand aller Modellrechnungen wurde eine physikalisch motivierte Näherungsfunktion für den Feuchteeffekt des Extinktions- und des Streukoeffizienten als Funktion des Aktivierungsparameters bereit gestellt. In Klimamodellen kann mit Hilfe der vorgestellten Näherungsfunktionen der Feuchteeffekt auf einfache Weise parametrisiert werden. Wenn man allerdings konkrete Messergebnisse miteinander vergleichen möchte, ist man auf eine vollständige Erfassung der mikrophysikalischen Eigenschaften der Partikel angewiesen. . Im Teil IV der Arbeit wurden auf der Basis des zuvor vorgestellten Datensatzes und der hierfür entwickelten Verfahren (Algorithmen) weitere Auswertungen zu unterschiedlichen, für die Meteorologie interessanten Themengebieten, vorgestellt und ihre Ergebnisse charakterisiert. . In Kapitel 6.1 wurde mit Hilfe von Auswertegleichungen aus den in dieser Arbeit erstellten Messungen des Sieben-Sensor-Bilanzphotometers und den Messungen des Aerosolphotometers die Volumenabsorptionsrate solarer Strahlung der bodennahen Partikel und die daraus resultierende Erwärmungsrate der Luft berechnet. Die Ergebnisse wurden mit Literaturwerten anderer Messkampagnen verglichen. Insbesondere konnte ein interessantes Ergebnis von Hänel
Development of a Bioaerosol single particle detector (BIO IN) for the Fast Ice Nucleus CHamber FINCH
(2010)
In this work we present the setup and first tests of our new BIO IN detector. This detector was constructed to classify atmospheric ice nuclei (IN) for their biological content. It is designed to be coupled to the Fast Ice Nucleus CHamber FINCH. If one particle acts as an ice nucleus, it will be at least partly covered with ice at the end of the development section of the FINCH chamber. The device combines an auto-fluorescence detector and a circular depolarization detector for simultaneous detection of biological material and discrimination between water droplets, ice crystals and non activated large aerosol particles. The excitation of biological material with UV light and analysis of auto-fluorescence is a common principle used for flow cytometry, fluorescence microscopy, spectroscopy and imaging. The detection of auto-fluorescence of airborne single particles demands some more experimental effort. However, expensive commercial sensors are available for special purposes, e.g. size distribution measurements. But these sensors will not fit the specifications needed for the FINCH IN counter (e.g. high sample flow of up 10 LPM). The newly developed -low cost- BIO IN sensor uses a single high-power UV LED for the electronic excitation instead of much more expensive UV lasers. Other key advantages of the new sensor are the low weight, compact size, and the little effect on the aerosol sample, which allows it to be coupled with other instruments for further analysis. The instrument will be flown on one of the first missions of the new German research aircraft "HALO" (High Altitude and LOng range).
In this work we present the setup and first tests of our new BIO IN detector. This detector is designed to classify atmospheric ice nuclei (IN) for their biological content. Biological material is identified via its auto-fluorescence (intrinsic fluorescence) after irradiation with UV radiation. Ice nuclei are key substances for precipitation development via the Bergeron–Findeisen process. The level of scientific knowledge regarding origin and climatology (temporal and spatial distribution) of IN is very low. Some biological material is known to be active as IN even at relatively high temperatures of up to –2°C (e.g. pseudomonas syringae bacteria). These biological IN could have a strong influence on the formation of clouds and precipitation. We have designed the new BIO IN sensor to analyze the abundance of IN of biological origin. The instrument will be flown on one of the first missions of the new German research aircraft ''HALO'' (High Altitude and LOng Range).
Im Rahmen des Projektes SPURT (Spurenstofftransport in der Tropopausenregion) als Teil des deutschen Atmosphärenforschungsprogramms AFO 2000 wurden bei 8 Messkampagnen mit insgesamt 36 Flügen innerhalb eines Beobachtungszeitraums von zwei Jahren (Nov. 2001 bis Juli 2003) Spurengasmessungen in dem Breitenbereich zwischen 35°N und 75°N durchgeführt. Für die Messungen der Spurengase N2O, F12, SF6, H2 und CO wurde der vollautomatisierte in-situ GC (Gaschromatograph) GhOST II (Gas Chromatograph for the Observation of Stratospheric Tracers) entwickelt und eingesetzt. Das Ziel dieser Messungen war die Untersuchung der jahreszeitlichen Variabilität der Spurengase in der oberen Troposphäre und untersten Stratosphäre (UT/LMS: Upper Troposphere/Lowermost Stratosphere), um die Transport- und Austauschprozesse in der Tropopausenregion besser zu verstehen. Zur Untersuchung von Transport und Mischung in der UT/LMS wurden die Rückwärtstrajektorien entlang der Flugpfade, die Verteilungen der Tracer N2O, F12, SF6, CO und CO2 (MPI für Chemie in Mainz), die Tracer/Tracer-Korrelationen N2O/F12, N2O/O3 F12/O3 und SF6/O3 und die Verteilungen des aus SF6-Messungen berechnete mittlere Alters der Luft herangezogen. Zusätzlich wurden die simultanen Messungen der beiden Alterstracer CO2 und SF6 genutzt, um die Propagation der Amplitude des troposphärischen CO2-Jahresgangs in die LMS zu bestimmen und daraus mit Hilfe eines empirischen Altersspektrums den Eintrag und die mittlere Transportzeit aus der Troposphäre in die unterste Stratosphäre zu quantifizieren. Grundsätzlich muss die LMS in zwei Bereiche eingeteilt werden – die Übergangsschicht („tropopause following layer“) bis etwa 20-30 K über der potentiellen Temperatur der lokalen Tropopause [Hoor et al., 2004] und die freie LMS oberhalb dieser Schicht. Als wesentliche Unterscheidungsmerkmale beider Bereiche wird die mittlere Transportzeit des Eintrags troposphärischer Luft identifiziert. Aus Trajektorienuntersuchungen und Tracerverteilungen (Kap. 3.4) kann gezeigt werden, dass der Transport in die Übergangsschicht und die Mischungsprozesse in diesem Bereich auf der Zeitskala der mesoskaligen troposphärischen Prozesse ablaufen. Im Gegensatz dazu werden aus der Massenbilanz (Kap. 5.3) mittlere Transportzeiten aus der Troposphäre in die freie LMS von einigen Wochen bis zu mehreren Monaten abgeleitet. Außerdem konnte nachgewiesen werden, dass der troposphärische Eintrag in der freien LMS fast ausschließlich auf quasihorizontale isentrope Einmischung aus den Tropen über die Transportbarriere des Subtropenjets zurückzuführen ist. Nur im Sommer und Herbst konnte auch oberhalb der Übergangsschicht für einzelne Messungen ein Einfluss aus der extratropischen Troposphäre beobachtet werden. Die in dieser Arbeit untersuchten Tracerverteilungen und -korrelationen (Kap. 4) und die Verteilung des mittleren Alters (Kap.5.2) in der LMS zeigen einen Jahresgang mit einem maximalen troposphärischen Einfluss im Oktober und einem maximalen stratosphärischen Einfluss im April. Diese saisonale Charakteristik in der freien LMS kann durch die saisonalen Änderungen des Verhältnisses von Abwärtstransport aus der Overworld und quasihorizontalem Transport aus den Tropen und durch die mit den jeweiligen Transportprozessen assoziierte mittlere Transportzeiten erklärt werden, die aus Massenbilanzrechnungen bestimmt wurden. Es wird gezeigt, dass der überwiegende Eintrag von troposphärischer Luft in die LMS im Sommer und Herbst stattfindet, wobei im Mittel die kürzesten mittleren Transitzeiten (unter 0.3 Jahre) für den August und die längsten Transitzeiten (über 0.6 Jahre) für den Mai berechnet werden. Aus den Ergebnissen wird gefolgert, dass ein ausgeprägter isentroper Austauschprozess über den Subtropenjet im Sommer bis in den Herbst hinein der dominierende troposphärische Einfluss in der LMS bis in den Mai ist. Der Vergleich zwischen SPURT und anderen in der UT/LMS im Zeitraum von 1992 bis 1998 durchgeführten Messkampagnen zeigt einen systematischen Unterschied in den N2O/O3-Korrelationen. Die Zunahme von O3 relativ zu N2O in der LMS ist um etwa 6.5 ppb O3 pro 1 ppb N2O bzw. etwa 40% größer als die Zunahme bei jahreszeitlich vergleichbaren früheren Kampagnen. Durch eine weitergehende Analyse der Messungen, z.B. durch den Vergleich der N2O-Verteilungen in der LMS bei verschiedenen Messkampagnen, und zusätzlichen Informationen aus Satelliten- und Ballonmessungen wird abgeleitet, dass diese Änderung der N2O/O3-Korrelationen im Wesentlichen auf einen im Zeitraum von SPURT stärkeren quasihorizontalen Transport aus den Tropen in die Extratropen im Bereich des so genannten „tropical controlled transition layer“ [Rosenlof et al., 1997] zwischen 16-21 km (bzw. Θ ≈ 380-450 K) zurückzuführen ist. In Kooperation mit B. Bregman wurden mit dem Chemie-Transport-Modell TM5 des KNMI die Verteilungen von SF6 und CO2 in der Troposphäre und Stratosphäre, unter den Zielsetzungen Evaluation des Modelltransports und Erweiterung des Datensatzes von SPURT auf globalen Maßstab, für den Zeitraum 1.1.2000 bis 31.12.2002 modelliert. Dabei konnte gezeigt werden, dass bei Modellstudien zur Evaluation des Transports mit Hilfe von Alterstracern nicht nur troposphärisch monoton steigende Tracer wie SF6 sondern auch saisonal variable Tracer wie CO2 verwendet werden müssen. Bei dem Vergleich der Modellergebnisse des TM5 mit ER2- und SPURTMessungen zeigt sich, dass das Modell zum jetzigen Zeitpunkt in der Lage ist, das mittlere Alter in der unteren Stratosphäre und die SF6- und CO2-Verteilungen in der LMS qualitativ richtig wiederzugeben. Das mittlere Alter in der unteren Stratosphäre wird um etwa 0.5 bis 1 Jahr in den Tropen über- und in den Extratropen unterschätzt. Die vertikalen Gradienten im Modell für SF6 und CO2 in der LMS sind, insbesondere im Winter und Frühjahr, zu gering. Die Amplitude des CO2-Jahresganges in der oberen Troposphäre und in der LMS wird durch das Modell unterschätzt, während der saisonale Verlauf des Jahresganges richtig wiedergegeben wird. Im Moment wird vermutet, dass eine zu starke isentrope Mischung zwischen Tropen und Extratropen und/oder ein zu geringer Aufwärtstransport in der extratropischen Troposphäre im Sommer und Herbst die Ursachen für die beobachteten Abweichungen zwischen Modell und Messung sind.
In this paper we present evidence that the observed increase in tropical upwelling after the year 2000 may be attributed to a change in the Brewer-Dobson circulation pattern. For this purpose, we use the concept of transit times derived from residual circulation trajectories and different in-situ measurements of ozone and nitrous dioxide. Observations from the Canadian midlatitude ozone profile record, probability density functions of in-situ N2O observations and a shift of the N2O-O3 correlation slopes, taken together, indicate that the increased upwelling in the tropics after the year 2000 appears to have triggered an intensification of tracer transport from the tropics into the extratropics in the lower stratosphere below about 500 K. This finding is corroborated by the fact that transit times along the shallow branch of the residual circulation into the LMS have decreased for the same time period (1993–2003). On a longer time scale (1979–2009), the transit time of the shallow residual circulation branch show a steady decrease of about −1 month/decade over the last 30 years, while the transit times of the deep branch remain unchanged. This highlights the fact that a change in the upwelling across the tropical tropopause is not a direct indicator for changes of the whole Brewer-Dobson circulation.
In this paper we present evidence that the observed increase in tropical upwelling after the year 2000 may be attributed to a change in the Brewer-Dobson circulation pattern. For this purpose, we use the concept of transit times derived from residual circulation trajectories and different in-situ measurements of ozone and nitrous dioxide. Observations from the Canadian midlatitude ozone profile record, probability density functions of in-situ N2O observations and a shift of the N2O-O3 correlation slopes, taken together, indicate that the increased upwelling in the tropics after the year 2000 appears to have triggered an intensification of tracer transport from the tropics into the extratropics in the lower stratosphere below about 500 K. This finding is corroborated by the fact that transit times along the shallow branch of the residual circulation into the LMS have decreased for the same time period (1993–2003). On a longer time scale (1979–2009), the transit time of the shallow residual circulation branch show a steady decrease of about −1 month/decade over the last 30 yr, while the transit times of the deep branch remain unchanged. This highlights that changes in the upwelling across the tropical tropopause are not sufficient as an indicator for changes in the entire Brewer-Dobson circulation.
The seasonality of transport and mixing of air into the lowermost stratosphere (LMS) is studied using distributions of mean age of air and a~mass balance approach, based on in-situ observations of SF6 and CO2 during the SPURT (Spurenstofftransport in der Tropopausenregion, trace gas transport in the tropopause region) aircraft campaigns. Combining the information of the mean age of air and the water vapour distributions we demonstrate that the tropospheric air transported into the LMS above the extratropical tropopause layer (ExTL) originates predominantly from the tropical tropopause layer (TTL). The concept of our mass balance is based on simultaneous measurements of the two passive tracers and the assumption that transport into the LMS can be described by age spectra which are superposition of two different modes. Based on this concept we conclude that the stratospheric influence on LMS composition is strongest in April with tropospheric fractions (α1) below 20% and that the strongest tropospheric signatures are found in October with (α1 greater than 80%. Beyond the fractions, our mass balance concept allows to calculate the associated transit times for transport of tropospheric air from the tropics into the LMS. The shortest transit times (<0.3 years) are derived for the summer, continuously increasing up to 0.8 years by the end of spring. These findings suggest that strong quasi-horizontal mixing across the weak subtropical jet from summer to mid of autumn and the considerably shorter residual transport time-scales within the lower branch of the Brewer-Dobson circulation in summer than in winter dominates the tropospheric influence in the LMS until the beginning of next year's summer.
The seasonality of transport and mixing of air into the lowermost stratosphere (LMS) is studied using distributions of mean age of air and a mass balance approach, based on in-situ observations of SF6 and CO2 during the SPURT (Spurenstofftransport in der Tropopausenregion, trace gas transport in the tropopause region) aircraft campaigns. Combining the information of the mean age of air and the water vapour distributions we demonstrate that the tropospheric air transported into the LMS above the extratropical tropopause layer (ExTL) originates predominantly from the tropical tropopause layer (TTL). The concept of our mass balance is based on simultaneous measurements of the two passive tracers and the assumption that transport into the LMS can be described by age spectra which are superposition of two different modes. Based on this concept we conclude that the stratospheric influence on LMS composition is strongest in April with extreme values of the tropospheric fractions (alpha1) below 20% and that the strongest tropospheric signatures are found in October with alpha1 greater than 80%. Beyond the fractions, our mass balance concept allows us to calculate the associated transit times for transport of tropospheric air from the tropics into the LMS. The shortest transit times (<0.3 years) are derived for the summer, continuously increasing up to 0.8 years by the end of spring. These findings suggest that strong quasi-horizontal mixing across the weak subtropical jet from summer to mid of autumn and the considerably shorter residual transport time-scales within the lower branch of the Brewer-Dobson circulation in summer than in winter dominates the tropospheric influence in the LMS until the beginning of next year's summer.
The complete elastic stiffness tensor of thiourea has been determined from thermal diffuse scattering (TDS) using high-energy photons (100 keV). Comparison with earlier data confirms a very good agreement of the tensor coefficients. In contrast with established methods to obtain elastic stiffness coefficients (e.g. Brillouin spectroscopy, inelastic X-ray or neutron scattering, ultrasound spectroscopy), their determination from TDS is faster, does not require large samples or intricate sample preparation, and is applicable to opaque crystals. Using high-energy photons extends the applicability of the TDS-based approach to organic compounds which would suffer from radiation damage at lower photon energies.
During the APE-THESEO mission in the Indian Ocean the Myasishchev Design Bureau stratospheric research aircraft M55 Geophysica performed a flight over and within the inner core region of tropical cyclone Davina. Measurements of total water, water vapour, temperature, aerosol backscattering, ozone and tracers were made and are discussed here in comparison with the averages of those quantities acquired during the campaign time frame.
Temperature anomalies in the tropical tropopause layer (TTL), warmer than average in the lower part and colder than average in the upper TTL were observed. Ozone was strongly reduced compared to its average value, and thick cirrus decks were present up to the cold point, sometimes topped by a layer of very dry air. Evidence for meridional transport of trace gases in the stratosphere above the cyclone and the perturbed water distribution in the TTL is illustrated and discussed.
During the APE-THESEO mission in the Indian Ocean the Myasishchev Design Bureau stratospheric research aircraft M55 Geophysica performed a flight over and within the inner core region of tropical cyclone Davina. Measurements of total water, water vapour, temperature, aerosol backscattering, ozone and tracers were made and are discussed here in comparison with the averages of those quantities acquired during the campaign time frame. Temperature anomalies in the tropical tropopause layer (TTL), warmer than average in the lower part and colder than average in the upper TTL were observed. Ozone was strongly reduced compared to its average value, and thick cirrus decks were present up to the cold point, sometimes topped by a layer of very dry air. Evidence for meridional transport of trace gases in the stratosphere above the cyclone was observed and perturbed water distribution in the TTL was documented. The paper discuss possible processes of dehydration induced by the cirrus forming above the cyclone, and change in the chemical tracer and water distribution in the lower stratosphere 400–430 K due to meridional transport from the mid-latitudes and link with Davina. Moreover it compares the data prior and after the cyclone passage to discuss its actual impact on the atmospheric chemistry and thermodynamics.
Environmental change impacts on the C- and N-cycle of European forests: a model comparison study
(2013)
Forests are important components of the greenhouse gas balance of Europe. There is considerable uncertainty about how predicted changes to climate and nitrogen deposition will perturb the carbon and nitrogen cycles of European forests and thereby alter forest growth, carbon sequestration and N2O emission. The present study aimed to quantify the carbon and nitrogen balance, including the exchange of greenhouse gases, of European forests over the period 2010–2030, with a particular emphasis on the spatial variability of change. The analysis was carried out for two tree species: European beech and Scots pine. For this purpose, four different dynamic models were used: BASFOR, DailyDayCent, INTEGRATOR and Landscape-DNDC. These models span a range from semi-empirical to complex mechanistic. Comparison of these models allowed assessment of the extent to which model predictions depended on differences in model inputs and structure. We found a European average carbon sink of 0.160 ± 0.020 kgC m−2 yr−1 (pine) and 0.138 ± 0.062 kgC m−2 yr−1 (beech) and N2O source of 0.285 ± 0.125 kgN ha−1 yr−1 (pine) and 0.575 ± 0.105 kgN ha−1 yr−1 (beech). The European average greenhouse gas potential of the carbon sink was 18 (pine) and 8 (beech) times that of the N2O source. Carbon sequestration was larger in the trees than in the soil. Carbon sequestration and forest growth were largest in central Europe and lowest in northern Sweden and Finland, N. Poland and S. Spain. No single driver was found to dominate change across Europe. Forests were found to be most sensitive to change in environmental drivers where the drivers were limiting growth, where changes were particularly large or where changes acted in concert. The models disagreed as to which environmental changes were most significant for the geographical variation in forest growth and as to which tree species showed the largest rate of carbon sequestration. Pine and beech forests were found to have differing sensitivities to environmental change, in particular the response to changes in nitrogen and precipitation, with beech forest more vulnerable to drought. There was considerable uncertainty about the geographical location of N2O emissions. Two of the models BASFOR and LandscapeDNDC had largest emissions in central Europe where nitrogen deposition and soil nitrogen were largest, whereas the two other models identified different regions with large N2O emission. N2O emissions were found to be larger from beech than pine forests and were found to be particularly sensitive to forest growth.
Forests are important components of the greenhouse gas balance of Europe. There is considerable uncertainty about how predicted changes to climate and nitrogen deposition will perturb the carbon and nitrogen cycles of European forests and thereby alter forest growth, carbon sequestration and N2O emission. The present study aimed to quantify the carbon and nitrogen balance, including the exchange of greenhouse gases, of European forests over the period 2010–2030, with a particular emphasis on the spatial variability of change. The analysis was carried out for two tree species: European beech and Scots pine. For this purpose, four different dynamic models were used: BASFOR, DailyDayCent, INTEGRATOR and Landscape-DNDC. These models span a range from semi-empirical to complex mechanistic. Comparison of these models allowed assessment of the extent to which model predictions depended on differences in model inputs and structure. We found a European average carbon sink of 0.160 ± 0.020 kgC m−2 yr−1 (pine) and 0.138 ± 0.062 kgC m−2 yr−1 (beech) and N2O source of 0.285 ± 0.125 kgN ha−1 yr−1 (pine) and 0.575 ± 0.105 kgN ha−1 yr−1 (beech). The European average greenhouse gas potential of the carbon source was 18 (pine) and 8 (beech) times that of the N2O source. Carbon sequestration was larger in the trees than in the soil. Carbon sequestration and forest growth were largest in central Europe and lowest in northern Sweden and Finland, N. Poland and S. Spain. No single driver was found to dominate change across Europe. Forests were found to be most sensitive to change in environmental drivers where the drivers were limiting growth, where changes were particularly large or where changes acted in concert. The models disagreed as to which environmental changes were most significant for the geographical variation in forest growth and as to which tree species showed the largest rate of carbon sequestration. Pine and beech forests were found to have differing sensitivities to environmental change, in particular the response to changes in nitrogen and precipitation, with beech forest more vulnerable to drought. There was considerable uncertainty about the geographical location of N2O emissions. Two of the models BASFOR and LandscapeDNDC had largest emissions in central Europe where nitrogen deposition and soil nitrogen were largest whereas the two other models identified different regions with large N2O emission. N2O emissions were found to be larger from beech than pine forests and were found to be particularly sensitive to forest growth.
PolarCAP – A deep learning approach for first motion polarity classification of earthquake waveforms
(2022)
Highlights
• We present PolarCAP, a deep learning model that can classify the polarity of a waveform with a 98% accuracy.
• The first-motion polarity of seismograms is a useful parameter, but its manual determination can be laborious and imprecise.
• We demonstrate that in several cases the model can assign trace polar-ity more accurately than a human analyst.
Abstract
The polarity of first P-wave arrivals plays a significant role in the effective determination of focal mechanisms specially for smaller earthquakes. Manual estimation of polarities is not only time-consuming but also prone to human errors. This warrants a need for an automated algorithm for first motion polarity determination. We present a deep learning model - PolarCAP that uses an autoencoder architecture to identify first-motion polarities of earth-quake waveforms. PolarCAP is trained in a supervised fashion using more than 130,000 labelled traces from the Italian seismic dataset (INSTANCE) and is cross-validated on 22,000 traces to choose the most optimal set of hyperparameters. We obtain an accuracy of 0.98 on a completely unseen test dataset of almost 33,000 traces. Furthermore, we check the model generalizability by testing it on the datasets provided by previous works and show that our model achieves a higher recall on both positive and negative polarities.
Current atmospheric models do not include secondary organic aerosol (SOA) production from gas-phase reactions of polycyclic aromatic hydrocarbons (PAHs). Recent studies have shown that primary semivolatile emissions, previously assumed to be inert, undergo oxidation in the gas phase, leading to SOA formation. This opens the possibility that low-volatility gas-phase precursors are a potentially large source of SOA. In this work, SOA formation from gas-phase photooxidation of naphthalene, 1-methylnaphthalene (1-MN), 2-methylnaphthalene (2-MN), and 1,2-dimethylnaphthalene (1,2-DMN) is studied in the Caltech dual 28-m3 chambers. Under high-NOx conditions and aerosol mass loadings between 10 and 40 microg m-3, the SOA yields (mass of SOA per mass of hydrocarbon reacted) ranged from 0.19 to 0.30 for naphthalene, 0.19 to 0.39 for 1-MN, 0.26 to 0.45 for 2-MN, and constant at 0.31 for 1,2-DMN. Under low-NOx conditions, the SOA yields were measured to be 0.73, 0.68, and 0.58, for naphthalene, 1-MN, and 2-MN, respectively. The SOA was observed to be semivolatile under high-NOx conditions and essentially nonvolatile under low-NOx conditions, owing to the higher fraction of ring-retaining products formed under low-NOx conditions. When applying these measured yields to estimate SOA formation from primary emissions of diesel engines and wood burning, PAHs are estimated to yield 3–5 times more SOA than light aromatic compounds. PAHs can also account for up to 54% of the total SOA from oxidation of diesel emissions, representing a potentially large source of urban SOA.