Refine
Year of publication
Document Type
- Article (39)
- Book (1)
- Conference Proceeding (1)
- Preprint (1)
- Review (1)
Has Fulltext
- yes (43)
Is part of the Bibliography
- no (43)
Keywords
- COSMO-CLM (5)
- precipitation (4)
- Clausius–Clapeyron scaling (3)
- convective storms (3)
- tracking (3)
- Europe (2)
- Odra (2)
- convection-permitting simulation (2)
- homogeneity (2)
- transfer entropy (2)
In this study we investigate the scaling of precipitation extremes with temperature in the Mediterranean region by assessing against observations the present day and future regional climate simulations performed in the frame of the HyMeX and MED-CORDEX programs. Over the 1979–2008 period, despite differences in quantitative precipitation simulation across the various models, the change in precipitation extremes with respect to temperature is robust and consistent. The spatial variability of the temperature–precipitation extremes relationship displays a hook shape across the Mediterranean, with negative slope at high temperatures and a slope following Clausius–Clapeyron (CC)-scaling at low temperatures. The temperature at which the slope of the temperature–precipitation extreme relation sharply changes (or temperature break), ranges from about 20 °C in the western Mediterranean to <10 °C in Greece. In addition, this slope is always negative in the arid regions of the Mediterranean. The scaling of the simulated precipitation extremes is insensitive to ocean–atmosphere coupling, while it depends very weakly on the resolution at high temperatures for short precipitation accumulation times. In future climate scenario simulations covering the 2070–2100 period, the temperature break shifts to higher temperatures by a value which is on average the mean regional temperature change due to global warming. The slope of the simulated future temperature–precipitation extremes relationship is close to CC-scaling at temperatures below the temperature break, while at high temperatures, the negative slope is close, but somewhat flatter or steeper, than in the current climate depending on the model. Overall, models predict more intense precipitation extremes in the future. Adjusting the temperature–precipitation extremes relationship in the present climate using the CC law and the temperature shift in the future allows the recovery of the temperature–precipitation extremes relationship in the future climate. This implies negligible regional changes of relative humidity in the future despite the large warming and drying over the Mediterranean. This suggests that the Mediterranean Sea is the primary source of moisture which counteracts the drying and warming impacts on relative humidity in parts of the Mediterranean region.
Influence of sea surface roughness length parameterization on Mistral and Tramontane simulations
(2016)
The Mistral and Tramontane are mesoscale winds in southern France and above the Western Mediterranean Sea. They are phenomena well suited for studying channeling effects as well as atmosphere–land/ocean processes. This sensitivity study deals with the influence of the sea surface roughness length parameterizations on simulated Mistral and Tramontane wind speed and wind direction. Several simulations with the regional climate model COSMO-CLM were performed for the year 2005 with varying values for the Charnock parameter α. Above the western Mediterranean area, the simulated wind speed and wind direction pattern on Mistral days changes depending on the parameterization used. Higher values of α lead to lower simulated wind speeds. In areas, where the simulated wind speed does not change much, a counterclockwise rotation of the simulated wind direction is observed.
Evaluation of radiation components in a global freshwater model with station-based observations
(2016)
In many hydrological models, the amount of evapotranspired water is calculated using the potential evapotranspiration (PET) approach. The main driver of several PET approaches is net radiation, whose downward components are usually obtained from meteorological input data, whereas the upward components are calculated by the model itself. Thus, uncertainties can be large due to both the input data and model assumptions. In this study, we compare the radiation components of the WaterGAP Global Hydrology Model, driven by two meteorological input datasets and two radiation setups from ERA-Interim reanalysis. We assess the performance with respect to monthly observations provided by the Baseline Surface Radiation Network (BSRN) and the Global Energy Balance Archive (GEBA). The assessment is done for the global land area and specifically for energy/water limited regions. The results indicate that there is no optimal radiation input throughout the model variants, but standard meteorological input datasets perform better than those directly obtained by ERA-Interim reanalysis for the key variable net radiation. The low number of observations for some radiation components, as well as the scale mismatch between station observations and 0.5° × 0.5° grid cell size, limits the assessment.
Mistral and tramontane wind speed and wind direction patterns in regional climate simulations
(2016)
The Mistral and Tramontane are important wind phenomena that occur over southern France and the northwestern Mediterranean Sea. Both winds travel through constricting valleys before flowing out towards the Mediterranean Sea. The Mistral and Tramontane are thus interesting phenomena, and represent an opportunity to study channeling effects, as well as the interactions between the atmosphere and land/ocean surfaces. This study investigates Mistral and Tramontane simulations using five regional climate models with grid spacing of about 50 km and smaller. All simulations are driven by ERA-Interim reanalysis data. Spatial patterns of surface wind, as well as wind development and error propagation along the wind tracks from inland France to offshore during Mistral and Tramontane events, are presented and discussed. To disentangle the results from large-scale error sources in Mistral and Tramontane simulations, only days with well simulated large-scale sea level pressure field patterns are evaluated. Comparisons with the observations show that the large-scale pressure patterns are well simulated by the considered models, but the orographic modifications to the wind systems are not well simulated by the coarse-grid simulations (with a grid spacing of about 50 km), and are reproduced slightly better by the higher resolution simulations. On days with Mistral and/or Tramontane events, most simulations underestimate (by 13 % on average) the wind speed over the Mediterranean Sea. This effect is strongest at the lateral borders of the main flow—the flow width is underestimated. All simulations of this study show a clockwise wind direction bias over the sea during Mistral and Tramontane events. Simulations with smaller grid spacing show smaller biases than their coarse-grid counterparts.
Convection-permitting models (CPMs) have proven their usefulness in representing precipitation on a sub-daily scale. However, investigations on sub-hourly scales are still lacking, even though these are the scales for which showers exhibit the most variability. A Lagrangian approach is implemented here to evaluate the representation of showers in a CPM, using the limited-area climate model COSMO-CLM. This approach consists of tracking 5‑min precipitation fields to retrieve different features of showers (e.g., temporal pattern, horizontal speed, lifetime). In total, 312 cases are simulated at a resolution of 0.01 ° over Central Germany, and among these cases, 78 are evaluated against a radar dataset. The model is able to represent most observed features for different types of convective cells. In addition, the CPM reproduced well the observed relationship between the precipitation characteristics and temperature indicating that the COSMO-CLM model is sophisticated enough to represent the climatological features of showers.
The frequency of extreme events has changed, having a direct impact on human lives. Regional climate models help us to predict these regional climate changes. This work presents an atmosphere–ocean coupled regional climate system model (RCSM; with the atmospheric component COSMO-CLM and the ocean component NEMO) over the European domain, including three marginal seas: the Mediterranean, North, and Baltic Sea. To test the model, we evaluate a simulation of more than 100 years (1900–2009) with a spatial grid resolution of about 25 km. The simulation was nested into a coupled global simulation with the model MPI-ESM in a low-resolution configuration, whose ocean temperature and salinity were nudged to the ocean–ice component of the MPI-ESM forced with the NOAA 20th Century Reanalysis (20CR). The evaluation shows the robustness of the RCSM and discusses the added value by the coupled marginal seas over an atmosphere-only simulation. The coupled system is stable for the complete 20th century and provides a better representation of extreme temperatures compared to the atmosphere-only model. The produced long-term dataset will help us to better understand the processes leading to meteorological and climate extremes.
A twentieth century-long coupled atmosphere-ocean regional climate simulation with COSMO-CLM (Consortium for Small-Scale Modeling, Climate Limited-area Model) and NEMO (Nucleus for European Modelling of the Ocean) is studied here to evaluate the added value of coupled marginal seas over continental regions. The interactive coupling of the marginal seas, namely the Mediterranean, the North and the Baltic Seas, to the atmosphere in the European region gives a comprehensive modelling system. It is expected to be able to describe the climatological features of this geographically complex area even more precisely than an atmosphere-only climate model. The investigated variables are precipitation and 2 m temperature. Sensitivity studies are used to assess the impact of SST (sea surface temperature) changes over land areas. The different SST values affect the continental precipitation more than the 2 m temperature. The simulated variables are compared to the CRU (Climatic Research Unit) observational data, and also to the HOAPS/GPCC (Hamburg Ocean Atmosphere Parameters and Fluxes from Satellite Data, Global Precipitation Climatology Centre) data. In the coupled simulation, added skill is found primarily during winter over the eastern part of Europe. Our analysis shows that, over this region, the coupled system is dryer than the uncoupled system, both in terms of precipitation and soil moisture, which means a decrease in the bias of the system. Thus, the coupling improves the simulation of precipitation over the eastern part of Europe, due to cooler SST values and in consequence, drier soil.
Often in climate system studies, linear and symmetric statistical measures are applied to quantify interactions among subsystems or variables. However, they do not allow identification of the driving and responding subsystems. Therefore, in this study, we aimed to apply asymmetric measures from information theory: the axiomatically proposed transfer entropy and the first principle-based information flow to detect and quantify climate interactions. As their estimations are challenging, we initially tested nonparametric estimators like transfer entropy (TE)-binning, TE-kernel, and TE k-nearest neighbor and parametric estimators like TE-linear and information flow (IF)-linear with idealized two-dimensional test cases along with their sensitivity on sample size. Thereafter, we experimentally applied these methods to the Lorenz-96 model and to two real climate phenomena, i.e., (1) the Indo-Pacific Ocean coupling and (2) North Atlantic Oscillation (NAO)–European air temperature coupling. As expected, the linear estimators work for linear systems but fail for strongly nonlinear systems. The TE-kernel and TE k-nearest neighbor estimators are reliable for linear and nonlinear systems. Nevertheless, the nonparametric methods are sensitive to parameter selection and sample size. Thus, this work proposes a composite use of the TE-kernel and TE k-nearest neighbor estimators along with parameter testing for consistent results. The revealed information exchange in Lorenz-96 is dominated by the slow subsystem component. For real climate phenomena, expected bidirectional information exchange between the Indian and Pacific SSTs was detected. Furthermore, expected information exchange from NAO to European air temperature was detected, but also unexpected reversal information exchange. The latter might hint to a hidden process driving both the NAO and European temperatures. Hence, the limitations, availability of time series length and the system at hand must be taken into account before drawing any conclusions from TE and IF-linear estimations.
The goal of limited area models (LAMs) is to downscale coarse-gridded general circulation model output to represent small-scale features of weather and climate. The LAM needs information from the driving coarse-gridded model passing through its lateral boundaries. The treatment of this information transfer causes inconsistencies between driving and nested models and, subsequently, issues in regional weather and climate simulations. This work examines errors arising from choices taken by the modeler (temporal update frequency of boundary data, spatial resolution jump, and numerical lateral boundary formulation) systematically in an idealized simulation environment. So-called Big-Brother Experiments were performed with the LAM COSMO-CLM (0.11° grid spacing). A baroclinic wave in a zonal channel was simulated over flat terrain with and without a Gaussian hill. The results reveal that the quality of the driving data, here represented by simulations only differing from the LAM simulations by reduced spatial resolution, dominates the performance of the nested model. Consequently, at the simulated mesoscale, the performance of the nested small-scale model simulations is weakly sensitive to the numerical lateral boundary formulation (Davies relaxation or the newly implemented, computationally less demanding Mesinger Eta-model formulation). The performance sensitivity to boundary update frequency and resolution jump is small when at least 6-hourly updates and a resolution jump factor of maximally six is used. Gaussian hill LAM simulations illustrated the strength of downscaling; they can represent small-scale features missing in the coarse-scale driving simulations. In the idealized simulation experiments, spectral nudging is not advisable as it imprints the driving models deficits on the nested simulation.
Convective shower characteristics simulated with the convection-permitting climate model COSMO-CLM
(2019)
This paper evaluates convective precipitation as simulated by the convection-permitting climate model (CPM) Consortium for Small-Scale Modeling in climate mode (COSMO-CLM) (with 2.8 km grid-spacing) over Germany in the period 2001–2015. Characteristics of simulated convective precipitation objects like lifetime, area, mean intensity, and total precipitation are compared to characteristics observed by weather radar. For this purpose, a tracking algorithm was applied to simulated and observed precipitation with 5-min temporal resolution. The total amount of convective precipitation is well simulated, with a small overestimation of 2%. However, the simulation underestimates convective activity, represented by the number of convective objects, by 33%. This underestimation is especially pronounced in the lowlands of Northern Germany, whereas the simulation matches observations well in the mountainous areas of Southern Germany. The underestimation of activity is compensated by an overestimation of the simulated lifetime of convective objects. The observed mean intensity, maximum intensity, and area of precipitation objects increase with their lifetime showing the spectrum of convective storms ranging from short-living single-cell storms to long-living organized convection like supercells or squall lines. The CPM is capable of reproducing the lifetime dependence of these characteristics but shows a weaker increase in mean intensity with lifetime resulting in an especially pronounced underestimation (up to 25%) of mean precipitation intensity of long-living, extreme events. This limitation of the CPM is not identifiable by classical evaluation techniques using rain gauges. The simulation can reproduce the general increase of the highest percentiles of cell area, total precipitation, and mean intensity with temperature but fails to reproduce the increase of lifetime. The scaling rates of mean intensity and total precipitation resemble observed rates only in parts of the temperature range. The results suggest that the evaluation of coarse-grained (e.g., hourly) precipitation fields is insufficient for revealing challenges in convection-permitting simulations.
Background:Aedes aegypti is a potential vector for several arboviruses including dengue and Zika viruses. The species seems to be restricted to subtropical/tropical habitats and has difficulties in establishing permanent populations in southern Europe, probably due to constraints during the winter season. The aim of this study was to systematically analyze the cold tolerance (CT) of Ae. aegypti in its most cold-resistant life stage, the eggs.
Methods: The CT of Ae. aegypti eggs was compared with that of Ae. albopictus which is well established in large parts of Europe. By systematically studying the literature (meta-analysis), we recognized that CT has been rarely tested in Ae. aegypti eggs, but eggs can survive at zero and sub-zero temperatures for certain exposure periods. To overcome potential bias from experimental differences between studies, we then conducted species comparisons using a harmonized high-resolution CT measuring method. From subtropical populations of the same origin, the survival (hatching in %) and emergence of adults of both species were measured after zero and sub-zero temperature exposures for up to 9 days (3 °C, 0 °C and − 2 °C: ≤ 9 days; − 6 °C: ≤ 2 days).
Results: Our data show that Ae. aegypti eggs can survive low and sub-zero temperatures for a short time period similar to or even better than those of Ae. albopictus. Moreover, after short sub-zero exposures of eggs of both species, individuals still developed into viable adults (Ae. aegypti: 3 adults emerged after 6 days at − 2 °C, Ae. albopictus: 1 adult emerged after 1 day at − 6 °C).
Conclusions: Thus, both the literature and the present experimental data indicate that a cold winter may not be the preventing factor for the re-establishment of the dengue vector Ae. aegypti in southern Europe.
Container-breeding Aedes spp. (Diptera: Culicidae) mosquitoes can be surveilled at low cost using ovitraps. Hence, this method is a preferred monitoring approach of dengue vectors in low-resource settings. The ovitraps consist of a cup filled with water and an oviposition substrate for female mosquitoes. The attractiveness of the substrates for female mosquitoes can greatly differ due to differences in texture, color, and smell of the materials used. We compare four oviposition substrates, which are all low priced, easy to transport, and easy to purchase, to maximize the success of Aedes egg sampling. Sampled egg material is often reared to adulthood for further taxonomic identification and transported to (international) laboratories for specialized vector research. Here we introduce a transport technique for sampled eggs. In addition, we explored the impact of international transport by means of a bilateral hatching experiment in Nepal, the country of origin, and in Germany, in a laboratory specialized in ecophysiological research. The best low-cost oviposition substrate for the dengue vectors Aedes albopictus (Skuse) and Aedes aegypti (L.) was found to be a white cotton sheet. The introduced transport technique of sampled eggs is easy to build from laboratory and household materials and ensures good transport conditions (i.e., temperature and relative humidity). Even under good temperature (17.4–31.0 °C) and humidity conditions (58.9–94.2%), hatching success of eggs was found to be reduced after international transport to Germany when compared to the hatching success of eggs in Nepal. We postulate that air pressure during international transport may have reduced the hatching success and strongly recommend pressure-regulated transport boxes for egg transport via airplane. As the proposed operation procedure is useful in assisting the monitoring of Ae. albopictus and Ae. aegypti in low-resource settings, Aedes researchers are encouraged to follow it for the sampling and transport of Aedes eggs.
Several past summer floods in Central Europe were associated with so-called Vb‑cyclones propagating from the Mediterranean Sea north-eastward to Central Europe. This study illustrates the usefulness of the parametric transfer entropy measure TE‑linear in investigating heavy Vb‑cyclone precipitation events in the Odra catchment (Poland). With the application of the TE‑linear approach, we confirm the impact of the Mediterranean Sea on precipitation intensification. Moreover, we also detect significant information exchange to Vb‑cyclone precipitation from evaporation over the European continent along the typical Vb‑cyclone pathway. Thus, the Mediterranean Sea could enhance the Vb‑cyclone precipitation by pre-moistening continental moisture source regions that contribute to precipitation downstream in the investigated catchments. Overall, the transfer entropy approach with the measure TE‑linear proved to be computationally effective and complementary to traditional methods such as Lagrangian and Eulerian diagnostics.
In the last decade, the Climate Limited-area Modeling Community (CLM-Community) has contributed to the Coordinated Regional Climate Downscaling Experiment (CORDEX) with an extensive set of regional climate simulations. Using several versions of the COSMO-CLM-Community model, ERA-Interim reanalysis and eight global climate models from phase 5 of the Coupled Model Intercomparison Project (CMIP5) were dynamically downscaled with horizontal grid spacings of 0.44∘ (∼ 50 km), 0.22∘ (∼ 25 km), and 0.11∘ (∼ 12 km) over the CORDEX domains Europe, South Asia, East Asia, Australasia, and Africa. This major effort resulted in 80 regional climate simulations publicly available through the Earth System Grid Federation (ESGF) web portals for use in impact studies and climate scenario assessments. Here we review the production of these simulations and assess their results in terms of mean near-surface temperature and precipitation to aid the future design of the COSMO-CLM model simulations. It is found that a domain-specific parameter tuning is beneficial, while increasing horizontal model resolution (from 50 to 25 or 12 km grid spacing) alone does not always improve the performance of the simulation. Moreover, the COSMO-CLM performance depends on the driving data. This is generally more important than the dependence on horizontal resolution, model version, and configuration. Our results emphasize the importance of performing regional climate projections in a coordinated way, where guidance from both the global (GCM) and regional (RCM) climate modeling communities is needed to increase the reliability of the GCM–RCM modeling chain.
In the last decade, the Climate Limited-area Modeling (CLM) Community has contributed to the Coordinated Regional Climate Downscaling Experiment (CORDEX) with an extensive set of regional climate simulations. Using several versions of the COSMO-CLM community model, ERA-Interim reanalysis and eight Global Climate Models from phase 5 of the Coupled Model Intercomparison Project (CMIP5) were dynamically downscaled with horizontal grid spacings of 0.44◦(∼50 km), 0.22◦ (∼25 km) and 0.11◦ (∼12 km) over the CORDEX domains Europe, South Asia, East Asia, Australasia and Africa. This major effort resulted in 80 regional climate simulations publicly available through the Earth System Grid Federation (ESGF) web portals for use in impact studies and climate scenario assessments. Here we review the production of these simulations and assess their results in terms of mean near-surface temperature and precipitation to aid the future design of the COSMO-CLM model simulations. It is found that a domain-specific parameter tuning is beneficial, while increasing horizontal model resolution (from 50 to 25 or 12 km grid spacing) alone does not always improve the performance of the simulation. Moreover, the COSMO-CLM performance depends on the driving data. This is generally more important than the dependence on horizontal resolution, model version and configuration. Our results emphasize the importance of performing regional climate projections in a coordinated way, where guidance from both the global (GCM) and regional (RCM) climate modelling communities is needed to increase the reliability of the GCM-RCM modelling chain.
Observed weather and projected climate change suggest an increase in the transmission of vector-borne diseases (VBDs) in the Hindu Kush Himalayan (HKH) region. In this study, we systematically explore the literature for empiric associations between the climate variables and specific VBDs and their vectors in the HKH region. We conducted a systematic synthesis of the published literature on climate variables, VBDs and vectors in the HKH region until the 8th of December 2020. The majority of studies show significant positive associations of VBDs with climatic factors, such as temperature, precipitation, relative humidity, etc. This systematic review allowed us to identify the most significant variables to be considered for evidence-based trend estimates of the effects of climate change on VBDs and their vectors in the HKH region. This evidence-based trend was set into the context of climate change as well as the observed expansion of VBDs and disease vectors in the HKH region. The geographic range of VBDs expanded into previously considered non-endemic areas of highlands (mountains) in the HKH region. Based on scarce, but clear evidence of a positive relationship of most climate variables and VBDs and the observed climatic changes, we strongly recommend an expansion of vector control and surveillance programmes in areas of the HKH region that were previously considered to be non-endemic.
Lightning climate change projections show large uncertainties caused by limited empirical knowledge and strong assumptions inherent to coarse-grid climate modeling. This study addresses the latter issue by implementing and applying the lightning potential index parameterization (LPI) into a fine-grid convection-permitting regional climate model (CPM). This setup takes advantage of the explicit representation of deep convection in CPMs and allows for process-oriented LPI inputs such as vertical velocity within convective cells and coexistence of microphysical hydrometeor types, which are known to contribute to charge separation mechanisms. The LPI output is compared to output from a simpler flash rate parameterization, namely the CAPE × PREC parameterization, applied in a non-CPM on a coarser grid. The LPI’s implementation into the regional climate model COSMO-CLM successfully reproduces the observed lightning climatology, including its latitudinal gradient, its daily and hourly probability distributions, and its diurnal and annual cycles. Besides, the simulated temperature dependence of lightning reflects the observed dependency. The LPI outperforms the CAPE × PREC parameterization in all applied diagnostics. Based on this satisfactory evaluation, we used the LPI to a climate change projection under the RCP8.5 scenario. For the domain under investigation centered over Germany, the LPI projects a decrease of 4.8% in flash rate by the end of the century, in opposition to a projected increase of 17.4% as projected using the CAPE × PREC parameterization. The future decrease of LPI occurs mostly during the summer afternoons and is related to (i) a change in convection occurrence and (ii) changes in the microphysical mixing. The two parameterizations differ because of different convection occurrences in the CPM and non-CPM and because of changes in the microphysical mixing, which is only represented in the LPI lightning parameterization.
Extreme convective precipitation is expected to increase with global warming. However, the rate of increase and the understanding of contributing processes remain highly uncertain. We investigated characteristics of convective rain cells like area, intensity, and lifetime as simulated by a convection-permitting climate model in the area of Germany under historical (1976–2005) and future (end-of-century, RCP8.5 scenario) conditions. To this end, a tracking algorithm was applied to 5-min precipitation output. While the number of convective cells is virtually similar under historical and future conditions, there are more intense and larger cells in the future. This yields an increase in hourly precipitation extremes, although mean precipitation decreases. The relative change in the frequency distributions of area, intensity, and precipitation sum per cell is highest for the most extreme percentiles, suggesting that extreme events intensify the most. Furthermore, we investigated the temperature and moisture scaling of cell characteristics. The temperature scaling drops off at high temperatures, with a shift in drop-off towards higher temperatures in the future, allowing for higher peak values. In contrast, dew point temperature scaling shows consistent rates across the whole dew point range. Cell characteristics scale at varying rates, either below (mean intensity), at about (maximum intensity and area), or above (precipitation sum) the Clausius–Clapeyron rate. Thus, the widely investigated extreme precipitation scaling at fixed locations is a complex product of the scaling of different cell characteristics. The dew point scaling rates and absolute values of the scaling curves in historical and future conditions are closest for the highest percentiles. Therefore, near-surface humidity provides a good predictor for the upper limit of for example, maximum intensity and total precipitation of individual convective cells. However, the frequency distribution of the number of cells depending on dew point temperature changes in the future, preventing statistical inference of extreme precipitation from near-surface humidity.
Moisture sources of heavy precipitation in Central Europe in synoptic situations with Vb-cyclones
(2022)
During the past century, several extreme summer floods in Central Europe were associated with so-called Vb-cyclones propagating from the Mediterranean Sea north-eastward to Central Europe. The processes intensifying the precipitation in synoptic situations with Vb-cyclones in the Danube, Elbe, and Odra catchments are only partially understood. Our study aims to investigate these processes with Lagrangian moisture-source diagnostics for 16 selected Vb-events. Moreover, we analyse the characteristics of typical moisture source regions during 1107 Vb-events from 1901 to 2010 based on ERA-20C reanalysis dynamically downscaled with COSMO-CLM+NEMO. We observe moisture contributions by various source regions highlighting the complex dynamical interplay of different air masses leading to moisture convergence in synoptic situations with Vb-cyclones. Overall, up to 80% of the precipitation originates from the European continent, indicating the importance of continental moisture recycling, especially within the respective river catchment. Other major moisture uptake regions are the North Sea, the Baltic Sea, the North Atlantic, and for a few events the Black Sea. Remarkably, anomalies in these oceanic source regions show no connection to precipitation amounts in synoptic situations with Vb-cyclones. In contrast, the Vb-cyclones with the highest precipitation are associated with anomalously high evaporation in the Mediterranean Sea, even though the Mediterranean Sea is only a minor moisture source region on average. Interestingly, the evaporation anomalies are not connected with sea-surface temperature but with wind-speed anomalies (Spearman’s rank correlation coefficient R≈0.7, significant with p<0.01) indicating mainly dynamically driven evaporation. The particular role of the Mediterranean Sea hints towards possible importance of Mediterranean moisture for the early-stage intensification of Vb-cyclones and the pre-moistening of the continental uptake regions upstream of the target catchments.
Background: Driven by globalization, urbanization and climate change, the distribution range of invasive vector species has expanded to previously colder ecoregions. To reduce health-threatening impacts on humans, insect vectors are extensively studied. Population genomics can reveal the genomic basis of adaptation and help to identify emerging trends of vector expansion.
Results: By applying whole genome analyses and genotype-environment associations to populations of the main dengue vector Ae. aegypti, sampled along an altitudinal temperature gradient in Nepal (200- 1300m), we identify adaptive traits and describe the species’ genomic footprint of climate adaptation to colder ecoregions. We found two clusters of differentiation with significantly different allele frequencies in genes associated to climate adaptation between the highland population (1300m) and all other lowland populations (≤ 800 m). We revealed non-synonymous mutations in 13 of the candidate genes associated to either altitude, precipitation or cold tolerance and identified an isolation-by-environment differentiation pattern.
Conclusion: Other than the expected gradual differentiation along the altitudinal gradient, our results reveal a distinct genomic differentiation of the highland population. This finding either indicates a differential invasion history to Nepal or local high-altitude adaptation explaining the population’s phenotypic cold tolerance. In any case, this highland population can be assumed to carry pre-adapted alleles relevant for the species’ invasion into colder ecoregions worldwide that way expanding their climate niche.