Refine
Year of publication
Has Fulltext
- yes (211)
Is part of the Bibliography
- no (211)
Keywords
- crystal structure (34)
- hydrogen bonding (11)
- X-Ray Structure Analysis (7)
- TATD (4)
- Schiff bases (3)
- benzoxazines (3)
- co-crystalline adducts (3)
- phenolic resins (3)
- silicon (3)
- NHC (2)
Institute
- Biochemie und Chemie (194)
- Biochemie, Chemie und Pharmazie (11)
- Medizin (6)
- Physik (2)
While it is apparent that rare variation can play an important role in the genetic architecture of autism spectrum disorders (ASDs), the contribution of common variation to the risk of developing ASD is less clear. To produce a more comprehensive picture, we report Stage 2 of the Autism Genome Project genome-wide association study, adding 1301 ASD families and bringing the total to 2705 families analysed (Stages 1 and 2). In addition to evaluating the association of individual single nucleotide polymorphisms (SNPs), we also sought evidence that common variants, en masse, might affect the risk. Despite genotyping over a million SNPs covering the genome, no single SNP shows significant association with ASD or selected phenotypes at a genome-wide level. The SNP that achieves the smallest P-value from secondary analyses is rs1718101. It falls in CNTNAP2, a gene previously implicated in susceptibility for ASD. This SNP also shows modest association with age of word/phrase acquisition in ASD subjects, of interest because features of language development are also associated with other variation in CNTNAP2. In contrast, allele scores derived from the transmission of common alleles to Stage 1 cases significantly predict case status in the independent Stage 2 sample. Despite being significant, the variance explained by these allele scores was small (Vm< 1%). Based on results from individual SNPs and their en masse effect on risk, as inferred from the allele score results, it is reasonable to conclude that common variants affect the risk for ASD but their individual effects are modest.
Although autism spectrum disorders (ASDs) have a substantial genetic basis, most of the known genetic risk has been traced to rare variants, principally copy number variants (CNVs). To identify common risk variation, the Autism Genome Project (AGP) Consortium genotyped 1558 rigorously defined ASD families for 1 million single-nucleotide polymorphisms (SNPs) and analyzed these SNP genotypes for association with ASD. In one of four primary association analyses, the association signal for marker rs4141463, located within MACROD2, crossed the genome-wide association significance threshold of P < 5 × 10−8. When a smaller replication sample was analyzed, the risk allele at rs4141463 was again over-transmitted; yet, consistent with the winner's curse, its effect size in the replication sample was much smaller; and, for the combined samples, the association signal barely fell below the P < 5 × 10−8 threshold. Exploratory analyses of phenotypic subtypes yielded no significant associations after correction for multiple testing. They did, however, yield strong signals within several genes, KIAA0564, PLD5, POU6F2, ST8SIA2 and TAF1C.
Remote control of the synthesis of a [2]rotaxane and its shuttling via metal‐ion translocation
(2019)
Remote control in an eight‐component network commanded both the synthesis and shuttling of a [2]rotaxane via metal‐ion translocation, the latter being easily monitored by distinct colorimetric and fluorimetric signals. Addition of zinc(II) ions to the red colored copper‐ion relay station rapidly liberated copper(I) ions and afforded the corresponding zinc complex that was visualized by a bright sky blue fluorescence at 460 nm. In a mixture of all eight components of the network, the liberated copper(I) ions were translocated to a macrocycle that catalyzed formation of a rotaxane by a double‐click reaction of acetylenic and diazide compounds. The shuttling frequency in the copper‐loaded [2]rotaxane was determined to k298=30 kHz (ΔH≠=62.3±0.6 kJ mol−1, ΔS≠=50.1±5.1 J mol−1 K−1, ΔG≠298=47.4 kJ mol−1). Removal of zinc(II) ions from the mixture reversed the system back generating the metal‐free rotaxane. Further alternate addition and removal of Zn2+ reversibly controlled the shuttling mode of the rotaxane in this eight‐component network where the ion translocation status was monitored by the naked eye.
The crystal structure of the title salt, [Li(CH3CN)4][B(NCS)4], is composed of discrete cations and anions. Both the Li and B atoms show a tetrahedral coordination by four equal ligands. The acetonitrile and isothiocyanate ligands are linear. The bond angles at the B atom are close to the ideal tetrahedral value [108.92 (18)–109.94 (16)°], but the bond angles at the Li atom show larger deviations [106.15 (17)–113.70 (17)°].
A chiral analog of the bicyclic guanidine TBD : synthesis, structure and Brønsted base catalysis
(2016)
Starting from (S)-β-phenylalanine, easily accessible by lipase-catalyzed kinetic resolution, a chiral triamine was assembled by a reductive amination and finally cyclized to form the title compound 10. In the crystals of the guanidinium benzoate salt the six membered rings of 10 adopt conformations close to an envelope with the phenyl substituents in pseudo-axial positions. The unprotonated guanidine 10 catalyzes Diels–Alder reactions of anthrones and maleimides (25–30% ee). It also promotes as a strong Brønsted base the retro-aldol reaction of some cycloadducts with kinetic resolution of the enantiomers. In three cases, the retro-aldol products (48–83% ee) could be recrystallized to high enantiopurity (≥95% ee). The absolute configuration of several compounds is supported by anomalous X-ray diffraction and by chemical correlation.
A new polymorph of the title compound, [Pd2(C8H18P)2(C8H19P)2], has been found. It belongs to the triclinic P-1 space group, whereas the known form [Leoni, Sommovigo, Pasquali, Sabatino & Braga (1992 [triangle]), J. Organomet. Chem. 423, 263–270] crystallizes in the monoclinic C2/c space group. The title compound features a dinuclear palladium complex with a planar central Pd2(μ-P)2 core (r.m.s. deviation = 0.003 Å). The Pd—Pd distance of 2.5988 (5) Å is within the range of a PdI—PdI bond. The molecules of both polymorphs are located on a crystallographic centre of inversion. The molecular conformations of the two polymorphs are essentially identical. The crystal packing patterns, on the other hand, are slightly different.
Rare copy-number variation (CNV) is an important source of risk for autism spectrum disorders (ASDs). We analyzed 2,446 ASD-affected families and confirmed an excess of genic deletions and duplications in affected versus control groups (1.41-fold, p = 1.0 × 10(-5)) and an increase in affected subjects carrying exonic pathogenic CNVs overlapping known loci associated with dominant or X-linked ASD and intellectual disability (odds ratio = 12.62, p = 2.7 × 10(-15), ∼3% of ASD subjects). Pathogenic CNVs, often showing variable expressivity, included rare de novo and inherited events at 36 loci, implicating ASD-associated genes (CHD2, HDAC4, and GDI1) previously linked to other neurodevelopmental disorders, as well as other genes such as SETD5, MIR137, and HDAC9. Consistent with hypothesized gender-specific modulators, females with ASD were more likely to have highly penetrant CNVs (p = 0.017) and were also overrepresented among subjects with fragile X syndrome protein targets (p = 0.02). Genes affected by de novo CNVs and/or loss-of-function single-nucleotide variants converged on networks related to neuronal signaling and development, synapse function, and chromatin regulation.
[MesnacnacZn(μ-H)]2 (1) was synthesized by reaction of MesnacnacZnI with either an equimolar amount of KNH(iPr)BH3 or an excess of NaH and characterized by multinuclear NMR and IR spectroscopy as well as X-ray diffraction. Two polymorphs of 1 were found and their structures determined on single crystals.
In the search for novel organic charge transfer salts with variable degrees of charge transfer we have studied the effects of two modifications of the recently synthesized donor–acceptor system [tetramethoxypyrene (TMP)]–[tetracyanoquinodimethane (TCNQ)]. One is of chemical nature by substituting the acceptor TCNQ molecules by F4TCNQ molecules. The second consists in simulating the application of uniaxial pressure along the stacking axis of the system. In order to test the chemical substitution, we have grown single crystals of the TMP–F4TCNQ complex and analyzed its electronic structure via electronic transport measurements, ab initio density functional theory (DFT) calculations and UV/VIS/IR absorption spectroscopy. This system shows an almost ideal geometrical overlap of nearly planar molecules stacked alternately (mixed stack) and this arrangement is echoed by a semiconductor-like transport behavior with an increased conductivity along the stacking direction. This is in contrast to TMP–TCNQ which shows a less pronounced anisotropy and a smaller conductivity response. Our band structure calculations confirm the one-dimensional behavior of TMP–F4TCNQ with pronounced dispersion only along the stacking axis. Infrared measurements illustrating the C[triple bond, length as m-dash]N vibration frequency shift in F4TCNQ suggest however no improvement in the degree of charge transfer in TMP–F4TCNQ with respect to TMP–TCNQ. In both complexes about 0.1e is transferred from TMP to the acceptor. Concerning the pressure effect, our DFT calculations on the designed TMP–TCNQ and TMP–F4TCNQ structures under different pressure conditions show that application of uniaxial pressure along the stacking axis of TMP–TCNQ may be the route to follow in order to obtain a much more pronounced charge transfer.
Molecules of the title compound, C40H42BrNO6, are located on a crystallographic twofold rotation axis. As a result, the nitro group and bromine residue are mutually disordered with equal occupancies. The propoxy-substituted aromatic rings are close to parallel to each other [dihedral angle = 21.24 (1)°], whereas the propenoxy-substituted rings enclose a dihedral angle of 70.44 (1)°. The dihedral angles between the methylene C atoms and the aromatic rings shows that the propenoxy substituted rings are bent away from the calixarene cavity [dihedral angle between the planes = 35.22 (8)°], whereas the propoxy-substituted rings are almost perpendicular [79.38 (10)°] to the plane of the methylene C atoms. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.006 A° ; disorder in main residue; R factor = 0.065; wR factor = 0.130; data-to-parameter ratio = 11.8.
The title compound, C14H9Cl3N2OS, has bond lengths and angles which are quite typical for thiourea compounds of this class. The molecule exists in the solid state in its thione form with typical thiourea C=S and C=O bond lengths, as well as shortened C-N bonds. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation. Intermolecular N-H...S hydrogen bonds link the molecules to form centrosymmetric dimers. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A° ; R factor = 0.029; wR factor = 0.078; data-to-parameter ratio = 17.2.
In the paper by Bolte [Acta Cryst. (2006), E62, m1609-m1610], the chemical name in the title and the chemical diagram are incorrect. The correct title is {5-[4'-(2,2,5,5-Tetramethyl-3-pyrroline-1-oxyl-3-carbonyloxy)biphenyl-4-ylethynyl]-2,3,7,8,12,13,17,18-octaethylporphyrinato}copper(II) benzene solvate' and the correct diagram is given below.
The title compound, C22H18N2O2, was derived from 1-(2-hydroxyphenyl)-3-(4-methoxyphenyl)propane-1,3-dione. The central pyrazole ring forms dihedral angles of 16.83 (5), 48.97 (4) and 51.68 (4)°, respectively, with the methoxyphenyl, phenyl and hydroxyphenyl rings. The crystal packing is stabilized by O-H...N hydrogen bonding. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.037; wR factor = 0.096; data-to-parameter ratio = 17.0.
The title molecule, C14H9ClN2OS, exists in the solid state in its amide form with a typical C=O bond length, as well as shortened C-N bonds. The plane containing the HNCO atoms subtends dihedral angles of 12.3 (4) and 8.1 (3)° with the planes of the phenyl ring and benzothiazole group, respectively, whereas the dihedral angle between the planes of the phenyl ring and the benzothiazole group is 5.96 (6)°. In the crystal, molecules form intermolecular N-H...N hydrogen bonds, generating independent scissor-like R22(8) dimers. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.028; wR factor = 0.079; data-to-parameter ratio = 13.3.
2-Aminopyrimidinium picrate
(2008)
The geometric parameters of the title compound, C4H6N3+·C6H2N3O7-, are in the usual ranges. While two nitro groups are almost coplanar with the aromatic picrate ring [dihedral angles 3.0 (2) and 4.4 (3)°], the third is significantly twisted out of this plane [dihedral angle 46.47 (8)°]. Anions and cations are connected via N-H...O hydrogen bonds. The molecules crystallize in planes parallel to (1\overline{2}1). Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.036; wR factor = 0.099; data-to-parameter ratio = 10.9.
In the title compound, C15H17ClN2O4S, the atoms in the hydantoin ring are coplanar (r.m.s. deviation = 0.006 Å). The crystal structure is stabilized by intermolecular N-H...O hydrogen bonds which link the molecules into centrosymmetric dimers. The dihedral angle subtended by the 4-chlorophenyl group with the plane passing through the hydantoin unit is 82.98 (4)°. The cyclohexyl ring adopts an ideal chair conformation. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.030; wR factor = 0.081; data-to-parameter ratio = 15.0.
In the title Grignard reagent, [MgBr(C12H9)(C5H10O)2], the Mg centre adopts a distorted tetrahedral MgCO2Br arrangement. The dihedral angle between the two aromatic rings of the biphenyl residue is 44.00 (14)°. Each molecule incorporates one R- and one S-configured 2-methyltetrahydrofuran molecule. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.007 Å; R factor = 0.045; wR factor = 0.108; data-to-parameter ratio = 17.4.
The two aromatic rings in the title compound, C15H12Cl2N2O2S, enclose a dihedral angle of 37.49 (6)°. The molecule exists in the solid state in its thione form with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation. In the crystal, molecules are connected by N-H...O and N-H...S hydrogen bonds, forming chains running along the alpha axis. Key indicators: single-crystal X-ray study; T = 173 K; mean σ (C–C) = 0.002 Å; disorder in main residue; R factor = 0.035; wR factor = 0.087; data-to-parameter ratio = 18.9.
The asymmetric unit of the title compound, C14H8Cl4N2OS·0.5H2O, contains two independent molecules with different conformations with respect to the aromatic ring planes, and one water molecule. The bond lengths and angles are typical of thiourea compounds of this class. The molecule exists in the solid state in its thione form with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. The dihedral angles between the two aromatic planes are 66.93 (8) and 60.44 (9)° in the two independent molecules. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and the crystal packing is characterized by N-H...O, O-H...S and O-H...Cl hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.045; wR factor = 0.125; data-to-parameter ratio = 16.8.
The crystal structure of the title compound, C14H8Cl4N2OS, is composed of discrete molecules with bond lengths and angles quite typical for thiourea compounds of this class. The plane containing the central SONNCC atom set subtends a dihedral angle of 31.47 (3)° with the benzene ring. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and the molecules form centrosymmetric dimers via intermolecular N-H...S hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.032; wR factor = 0.087; data-to-parameter ratio = 17.9.
The title compound, C14H6Cl6N2OS·0.5CHCl3, crystallizes with four 1-(2,6-dichlorobenzoyl)-3- (2,3,5,6-tetrachlorophenyl)thiourea molecules and two trichloromethane molecules in the asymmetric unit. The thiourea molecules exist in the solid state in their thione forms with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. The -NH-C(=S)-NH-C(=O)- plane is almost perpendicular to the benzene ring in each thiourea molecule. Intramolecular N-H...O hydrogen bonds stabilize the molecular conformation and intermolecular N-H...S hydrogen bonds stabilize the packing arrangement. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.051; wR factor = 0.147; data-to-parameter ratio = 23.2.
The structure of the title compound, C14H9Cl3N2OS, is composed of discrete molecules with bond lengths and angles quite typical for thiourea compounds of this class. The plane containing the thiocarbonyl and carbonyl groups subtends dihedral angles of 48.19 (3) and 87.51 (3)° with the planes formed by the 3-chloro and 2,6-dichlorophenyl rings, respectively; the dihedral angle between the two benzene ring planes is 45.32 (3)°. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and the molecules form intermolecular N-H...S and N-H...O hydrogen bonds, generating a sheet along the alpha axis. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.037; wR factor = 0.094; data-to-parameter ratio = 25.5.
The title molecule, C16H15ClN2OS, exists in the solid state in its thione form with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and intermolecular N-H...S hydrogen bonds link the molecules into centrosymmetric dimers. The dihedral angle between the aromatic rings is 50.18 (5)°. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.032; wR factor = 0.085; data-to-parameter ratio = 15.3.
The crystal structure of the title compound, C15H17BrN2O4S, is stabilized by intermolecular N-H...O hydrogen bonds which link the molecules into centrosymmetric dimers. The dihedral angle subtended by the 4-bromophenyl group with the mean plane passing through the hydantoin unit is 83.29 (5)°. The cyclohexyl group adopts an ideal chair conformation with the methyl group in an equatorial position. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.030; wR factor = 0.070; data-to-parameter ratio = 16.8.
The title compound, Cs2Mg(H2P2O7)2·2H2O, is isostructural with the related known isoformular phosphates. The crystal framework consists of corner-sharing MgO6 and H2P2O7 polyhedra, leading to tunnels parallel to the b-axis direction in which Cs+ ions are located. The H2P2O7 unit shows a bent eclipsed conformation. The Mg2+ ion lies on an inversion center. The water molecules form hydrogen bonds to O atoms of two different dihydrogenphosphate ions, which are further hydrogen bonded to symmetry-equivalent dihydrogenphosphate ions. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(P–O) = 0.006 Å; R factor = 0.048; wR factor = 0.125; data-to-parameter ratio = 12.3.
In the title molecule, C13H16ClNO, the mean plane of the atoms in the -CONH- group forms a dihedral angle of 42.0 (4)° with the benzene ring plane. In the crystal structure, molecules are linked by intermolecular N-H...O hydrogen bonds, generating C(4) chains along [100]. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.030; wR factor = 0.069; data-to-parameter ratio = 18.2.
The title compound, C16H14N2O2, was derived from 1-(2-hydroxyphenyl)-3-(2-methoxyphenyl)propane-1,3-dione. The molecule is essentially planar (r.m.s. deviation for all non-H atoms = 0.089 Å). Two intramolecular hydrogen bonds stabilize the molecular conformation and one N-H...O hydrogen bond stabilizes the crystal structure. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.035; wR factor = 0.091; data-to-parameter ratio = 9.3.
The title compound, C15H25N5, is an aminalization product between 2,6-diacetylpyridine and 1,3-diaminopropane. It crystallizes with two independent molecules in the asymmetric unit with different conformations. In the first molecule, the methyl groups are cis oriented with respect to the pyridine ring [N—C—C—C torsion angles = 72.5 (1) and 80.3 (1)°], while they are trans oriented in the second molecule [N—C—C—C torsion angles = 82.6 (1) and -90.8 (1)°]. Each of the two molecules forms centrosymmetric dimers held together by N—H[cdots, three dots, centered]N hydrogen bonds, thus forming R 2 2(16) rings. The two dimers are interlinked by additional N—H[cdots, three dots, centered]N bonds into R 4 4(14) rings, building chains along the a axis. These patterns influence the orientation (either equatorial or axial) of the N—H bonds.
Crystals of the title compound, C12H8N2·C7H8O2, were obtained during cocrystallization experiments of a compound with two hydrogen-bond donors (2-hydroxybenzyl alcohol) with another compound containing two hydrogen-bond acceptors (phenanthroline). Unexpectedly, the two molecules do not form dimers with two O—H ... N hydrogen bonds connecting the two molecules. However, one of the hydroxy groups forms a bifurcated hydrogen bond to both phenanthroline N atoms, whereas the other hydroxy group forms an O—H ... O hydrogen bond to a symmetry-equivalent 2-hydroxybenzyl alcohol molecule. In addition, the crystal packing is stabilized by Pi – Pi interactions between the two phenanthroline ring systems, with a centroid–centroid distance of 3.570 Å.
In the crystal of the title compound [systematic name: 2-(3,5-diamino-6-chloropyrazin-2-ylcarbonyl)guanidinium chloride methanol disolvate], C6H9ClN7O+·Cl-·2CH3OH , the components are connected by N—H ... N, N—H ... Cl, N—H ... O, O—H ... Cl and O—H ... O hydrogen bonds into a three-dimensional network. The dihedral angle between the aromatic ring and the guanidine residue is 6.0 (2)°.
The title compound, C6H5NO2·C6H6O2, crystallizes with one pyridinium-2-carboxylate zwitterion and one molecule of benzene-1,2-diol in the asymmetric unit. The crystal structure is characterized by alternating molecules forming zigzag chains running along the a axis: the molecules are connected by O—H ... O and N—H ... (O,O) hydrogen bonds.
The title compound (also know as azorellanone), C20H32O2, is built up from three fused carbocycles, one five-membered ring and two six-membered rings. The five membered-ring has an envelope conformation, whereas the six-membered rings have a distorted half-chair and a twist–boat conformation. In the crystal, molecules are linked by O—H ... O interactions into zigzag chains with graph-set notation C(8) along [010]. The absolute configuration was assigned on the basis of earlier chemical studies.
The title compound, C15H14N2O4, has a trans–gauche [O/C/C/C–O/C/C/C] (TG) conformation. The angle between the planes of aromatic rings is 76.4 (3)°. The crystal structure is stabilized by van der Waals interactions and C—H ... O hydrogen bonds. The crystal used was a non-merohedral twin with a fractional contribution of the minor component of 0.443 (5).
17-Acetoxymulinic acid
(2010)
The title compound, [systematic name: 5a-acetoxymethyl-3-isopropyl-8-methyl-1,2,3,3a,4,5,5a,6,7,10,10a,10b-dodecahydro-7,10-endo-epidioxycyclohepta[e]indene-3a-carboxylic acid], C22H32O6 (I), is closely related to methyl 5a-acetoxymethyl-3-isopropyl-8-methyl-1,2,3,3a,4,5,5a,6,7,10,10a,10b-dodecahydro-7,10-endo-epidioxycyclohepta[e]indene-3a-carboxylate, (II) [Brito et al., (2008 [triangle]). Acta Cryst. E64, o1209]. There are two molecules in the asymmetric unit, which are linked by two strong intramolecular O—H ... O hydrogen bonds with graph-set motif R 2 2(8). In both (I) and (II), the conformation of the three fused rings are almost identical. The five-membered ring has an envelope conformation, the six-membered ring has a chair conformation and the seven-membered ring has a boat conformation. The most obvious differences between the two compounds is the observed disorder of the acetoxymethyl fragments in both molecules of the asymmetric unit of (I). This disorder is not observed in (II). The crystal structure and the molecular conformation is stabilized by intermolecular C—H ... O hydrogen bonds. The ability to form hydrogen bonds is different in the two compounds. The crystal studied was a non-merohedral twin, the ratio of the twin components being 0.28 (1):0.72 (1)
In the title compound, C11H11N3O2, the dihedral angle between the central ethanone fragment and the 4-methoxyphenyl group is 2.9 (2)°, while that between the ethanone fragment and the triazole ring is 83.4 (2)°. The dihedral angle between the planes of the triazole and benzene rings is 81.7 (1)°. The 4-methoxyphenyl group is cis with respect to the ethanone fragment O atom across the exocyclic C—C bond. In the crystal, molecules are linked by C—H ... N interactions into C(9) chains along [001].
The title compound, C8H11FN5 +·Cl-, crystallized with a monoprotonated 1-(4-fluorophenyl)biguanidinium cation and a chloride anion in the asymmetric unit. The biguanidium group is not planar [dihedral angle between the two CN3 groups = 52.0 (1)°] and is rotated with respect to the phenyl group [tau = 54.3 (3)°]. In the crystal, N—H ... N hydrogen-bonded centrosymmetric dimers are connected into ribbons, which are further stabilized by N—H ... Cl interactions, forming a three-dimensional hydrogen-bonded network.
In the title compound, C4H7N3O·C2H6OS, creatinine [2-amino-1-methyl-1H-imidazol-4(5H)one] exists in the amine form. The ring is planar (r.m.s. deviation for all non-H atoms = 0.017 Å). In the crystal, two creatinine molecules form centrosymmetric hydrogen-bonded dimers linked by pairs of N—H[cdots, three dots, centered]N hydrogen bonds. In addition, creatinine is linked to a dimethyl sulfoxide molecule by an N—H[cdots, three dots, centered]O interaction. The packing shows layers parallel to (120).
The title compound. C15H14N2O4, (I), has a gauche–gauche (O/C/C/C—O/C/C/C or GG) conformation and is a positional isomer of propane-1,3-diyl bis(pyridine-3-carboxylate), (II). The molecule of (I) lies on a twofold rotation axis, which passes through the central C atom of the aliphatic chain, giving one half-molecule per asymmetric unit. There is excellent agreement of the geometric parameters of (I) and (II). The most obvious differences between them are the O/C/C/C—O/C/C/C torsion angles [56.6 (2)° in (I) and 174.0 (3)/70.2 (3)° in (II) for GG and TG conformations, respectively] and the dihedral angle between the planes of the aromatic rings [80.3 (10)° in (I) and 76.5 (3)° in (II)]. The crystal structure is stabilized by weak C—H ... N and C—H ... O hydrogen bonding.
The title compound, C20H22O2, crystallizes with two independent molecules in the asymmetric unit. In each molecule, all the non-H atoms lie in a common plane (r.m.s. deviations of 0.098 and 0.079 Å). There is a [pi]-[pi] stacking interaction in the crystal structure. The central aromatic rings of the two molecules, which are stacked head-to-tail one above the other, are separated by centroid-to-centroid distances of 3.872 (13) and 3.999 (10) Å. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 A° ; R factor = 0.044; wR factor = 0.101; data-to-parameter ratio = 14.6.
The title compound, C14H20O3, is a synthetic analogue with a long aliphatic side chain of the important food additive and flavoring agent, vanillin. There are two independent molecules in the asymmetric unit, each having an essentially planar conformation (r.m.s. deviations of 0.023 and 0.051Å for all non-H atoms of the two molecules in the asymmetric unit). Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A°; R factor = 0.049; wR factor = 0.144; data-to-parameter ratio = 15.9.
The geometric parameters of the title compound, C8H6N2O·C6H3N3O7, are in the usual ranges. The three nitro groups are almost coplanar with the aromatic picrate ring [dihedral angles 10.2 (2)°, 7.62 (16) and 8.08 (17)°]. The molecular conformation of the picric acid is stabilized by an intramolecular O-H...O hydrogen bond. The phthalazin-1(2H)-one molecules are connected via N-H...O hydrogen bonds, forming centrosymmetric dimers. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.034; wR factor = 0.091; data-to-parameter ratio = 11.1.
The title compound, C16H14N4, features an aromatic ring with two 2,2´-dicyanopropyl residues in positions 1 and 3, which are located above and below the ring plane. The two residues differ in their conformation with respect to the aromatic ring: whereas one of the Cmethyl-C-Cmethylene-Caromatic torsion angles is gauche [68.93 (12)°], the other one is fully staggered [177.63 (9)°]. The crystal structure is stabilized by C-H...N hydrogen-bonding interactions. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.037; wR factor = 0.101; data-to-parameter ratio = 15.0.
Adamantane-1-thioamide
(2009)
The title compound, C11H17NS, is an important intermediate for the synthesis of biologically active adamantlythiazolo-oxadiazoles. The adamantyl residue is disordered about a twofold rotation axis over two sites with site-occupation factors of 0.817 (3) and 0.183 (3). The crystal structure is stabilized by intermolecular N-H...S hydrogen-bonding interactions. Key indicators: single-crystal X-ray study; T = 173 K; mean &963;(C–C) = 0.002 Å; disorder in main residue; R factor = 0.038; wR factor = 0.103; data-to-parameter ratio = 12.3.
There are two independent molecules in the asymmetric unit of the title compound, C19H24S2. In both molecules, the aliphatic segment of the ligand is in an all-trans conformation: the –S–(CH2)5–S–bridging chain is almost planar (r.m.s. deviation for all non-H atoms = 0.0393 and 0.0796 Å in the two molecules) and maximally extended. Their mean planes form dihedral angles of 4.08 (6)/20.47 (6) and 2.22 (6)/58.19 (6)° with the aromatic rings in the two molecules. The crystal packing is purely governed by weak intermolecular forces.
In the title compound, C15H14N2O4, (I), the molecule lies on a twofold rotation axis which passes through the central C atom of the aliphatic chain, giving one half-molecule per asymmetric unit. The structure is a monoclinic polymorph of the triclinic structure previously reported [Brito, Vallejos, Bolte & López-Rodríguez (2010). Acta Cryst. E66, o792], (II). The most obvious difference between them is the O/C/C/C—O/C/C/C torsion angle [58.2 (7)° in (I) and 173.4 (3)/70.2 (3)° in (II) for GG and TG conformations, respectively]. Another important difference is observed in the dihedral angle between the planes of the aromatic rings [86.49 (7)° for (I) and 76.4 (3)° for (II)]. The crystal structure features a weak pi–pi interaction [centroid–centroid distance = 4.1397 (10)Å]; this latter kind of interaction is not evident in the triclinic polymorph.
The title compound, C15H15BrO2, was synthesized by a Brønsted acid-catalysed domino electrocyclization-halogenation reaction. The five-membered ring is essentially planar (r.m.s. deviation 0.006 Å) and forms a dihedral angle of 72.7 (3)° with the attached phenyl ring. The six-membered heterocycle adopts a half-chair conformation. The crystal packing is stabilized by a C—H[cdots, three dots, centered]O contact.
The title compound, C20H22O4S2, was synthesized by the reaction of 1,4-dibromobutene with methyl thiosalicylate. The aliphatic segment of this ligand is in an all-trans conformation. The bridging chain, –S-(CH2)4-S–, is almost planar (r.m.s. deviation for all non-H atoms: 0.056 Å) and its mean plane forms dihedral angles of 16.60 (7) and 5.80 (2)° with the aromatic rings. In the crystal, the molecules are linked by weak C—H ... O interactions into chains with graph-set notation C(14) along [0 0 1]. The crystal studied was a racemic twin, the ratio of the twin components being 0.27 (9):0.73 (9).
The title compound, C14H20O5S·0.5H2O, crystallizes with two organic molecules and a solvent water molecule in the asymmetric unit. In both molecules, the hexapyranosyl rings adopt a slightly distorted chair conformation (5 C 2) with four substituents in equatorial positions and one substituent in an axial position. The main difference between the organic molecules is the dihedral angle between the phenyl ring and the best plane defined by the O—C1—C2—C3 atoms (r.m.s deviations = 0.003 and 0.043 Å) of the hexapyranosyl rings [47.4 (4) and 86.5 (4)°]. In the asymmetric unit, molecules are linked by two strong O—H[cdots, three dots, centered]O hydrogen bonds. In the crystal, the components are linked by a total of 10 distinct O—H[cdots, three dots, centered]O hydrogen bonds, resulting in the formation of a two-dimensional network parallel to the ab plane.
Large crystals of the methyl ester of the N-a-benzyloxycarbonyl protected Ala-Phe dipeptide (Z-AF-OMe) were obtained after the very slow evaporation of a solution of the corresponding carboxylic acid (Z-AF-OH) in methanol containing an excess of HCl. The structure was confirmed by single crystal X-ray diffraction data. It crystallizes in the orthorhombic space group P212121 with unit cell dimensions a = 5.0655(6) Å, b = 8.4614(8) Å, c = 46.856(5) Å, V = 2008.3(4) Å3, Z = 4. In the crystal, the molecules form hydrogen bonded chains running along the a axis of the unit cell. Other secondary interactions are also discussed.
Two tetrahydroisoquinoline alkaloids were extracted from the alkaloid fraction of a methanol extract of the seeds of Calycotome Villosa Subsp. intermedia. Their structures were established as (R)-1-hydroxymethyl-7-8-dimethoxy-1,2,3,4-tetrahydro- isoquinoline (1) and (S)-7-hydroxymethyl-2-3-dimethoxy-7,8,9,10-tetrahydroisoquinoline chloride (2) by spectroscopic techniques and X-ray diffraction analysis.
In the title compound, C20H24N2O4, both peptide bonds adopt a trans configuration with respect to the —N—H and —C=O groups. The dihedral angle between the aromatic rings is 53.58 (4)°. The molecular conformation is stabilized by an intramolecular N—H⋯O hydrogen bond. The crystal packing is characterized by zigzag chains of N—H⋯O hydrogen-bonded molecules running along the b-axis direction.
Molecules of the title compound, C20H14O2, show approximate C s symmetry with the approximate mirror plane perpendicular to the central ring. The torsion angles about the acyclic bonds are 30.05 (15) and 30.77 (15)° in one half compared to −36.62 (14) and −18.60 (15)° in the other half of the molecule. The central aromatic ring makes dihedral angles of 47.78 (4) and 51.68 (3)° with the two terminal rings.
In the title compound, [Ag(BF4)(C14H12N2O4)]n, the coordination of the Ag+ ion is trigonal–bipyramidal with the N atoms of two ethane-1,2-diyl bis(pyridine-3-carboxylate) ligands in the apical positions and three F atoms belonging to different tetrafluoridoborate anions in the equatorial plane. The material consists of infinite chains of [Ag(C14H12N2O4)] units running along [001], held together by BF4 − bridging anions.
A novel method for the highly stereoselective synthesis of tetrahydropyrans is reported. This domino reaction is based on a twofold addition of enamides to aldehydes followed by a subsequent cyclization and furnishes fully substituted tetrahydropyrans in high yields. Three new σ‐bonds and five continuous stereogenic centers are formed in this one‐pot process with a remarkable degree of diastereoselectivity. In most cases, the formation of only one out of 16 possible diastereomers is observed. Two different stereoisomers can be accessed in a controlled fashion starting either from an E‐ or a Z‐configured enamide.
The title compound, C(21)H(18)ClN, was synthesized by an enanti-oselective Brønsted acid-catalysed transfer hydrogenation reaction. The six-membered heterocycle adopts a half-chair conformation. It has the biphenyl residue in an axial position. The two rings of the biphenyl residue are almost coplanar [dihedral angle = 2.65 (9)°]. The crystal packing is stabilized by N-H⋯Cl hydrogen bonds, which connect the mol-ecules into chains running along the a axis.
In the mol-ecule of the title compound, C(12)H(12)BrN(3)O, the fused-ring system is essentially planar, the largest deviation from the mean plane being 0.0148 (3) Å. The two allyl groups are nearly perpendicular to the imidazo[4,5-b]pyridine plane [C-C-N-C torsion angles of 81.6 (4) and -77.2 (4)°] and point in the same direction. The planes through the atoms forming each allyl group are nearly perpendicular to the imidazo[4,5-b]pyridin-2-one system, as indicated by the dihedral angles between them of 80.8 (5) and 73.6 (5)°.
The title compound, C(19)H(14)ClNO(3)·0.2H(2)O, crystallizes with five mol-ecules and a disordered water mol-ecule in the asymmetric unit. Four of the five mol-ecules form hydrogen-bonded dimers via N-H⋯O hydrogen bonds towards another symmetry-independent mol-ecule, whereas the fifth mol-ecule forms a hydrogen-bonded dimer with its symmetry equivalent, also via N-H⋯O hydrogen bonds. The dihedral angle between the planes of the fused benzene ring and the five-membered ring to which it is attached is 79.45 (13), 49.00 (15), 72.49 (16), 81.91 (18) and 76.38 (16)° for the five mol-ecules in the asymmetric unit.
The asymmetric unit of the title compound, C16H23ClN2O, comtains two independent molecules in which the fused-ring systems are essentially planar, the largest deviation from the mean plane of each molecule being 0.011 (2) Å and 0.016 (2) Å. The benzimidazole rings of the two molecules make a dihedral angle of 66.65 (7)°. The nonyl substituents are almost perpendicular to the benzimidazole planes [C—N—C—C tosrsion angles = 96.0 (3) and 81.0 (2)°]. In the crystal, each independent molecule forms an inversion dimer via a pair of N—H[cdots, three dots, centered]O hydrogen bonds. In one of the independent molecules, the terminal –CH2–CH3 group of the alkyl chain is disordered over two sets of sites with a refined occupancy ratio of 0.746 (7):0.254 (7).
The title compound, C26H18BrNO4, features a functionalized chromene. The cyclohexene ring adopts a sofa conformation and has the nitro group and the bromophenyl ring in an axial position. The ten atoms of the chromene moiety lie close to a common plane (r.m.s. deviation = 0.066 Å). The attached phenyl ring is twisted by 32.89 (10)° from the chromene plane. The crystal packing is stabilized by C—H[cdots, three dots, centered]O interactions.
In the title compound, C15H14N2O4, (I), the molecule lies on a twofold rotation axis which passes through the central C atom of the aliphatic chain, giving one half-molecule per asymmetric unit. The structure is a monoclinic polymorph of the triclinic structure previously reported [Brito, Vallejos, Bolte & López-Rodríguez (2010). Acta Cryst. E66, o792], (II). The most obvious difference between them is the O/C/C/C—O/C/C/C torsion angle [58.2 (7)° in (I) and 173.4 (3)/70.2 (3)° in (II) for GG and TG conformations, respectively]. Another important difference is observed in the dihedral angle between the planes of the aromatic rings [86.49 (7)° for (I) and 76.4 (3)° for (II)]. The crystal structure features a weak π–π interaction [centroid–centroid distance = 4.1397 (10)Å]; this latter kind of interaction is not evident in the triclinic polymorph.
In the molecular structure of the title compound, C21H18N2O, the fused-ring system is essentially planar, the largest deviation from the mean plane being 0.0121 (9) Å. The O atom and adjacent C atom are located in Wyckoff position 4e on a twofold axis (0, y, 1/4). The two benzyl groups are almost perpendicular to the benzimidazole plane, but point in opposite directions. The dihedral angle between the benzimidazole mean plane and the phenyl ring is 81.95 (5)°, whereas that between the two benzyl groups is 60.96 (7)°.
In the title compound, C27H37N2 +·Cl−·2CH2Cl2, the cation and the anion are each located on a crystallographic mirror plane. Both of the dichloromethane solvent molecules show a disorder across a mirror plane over two equally occupied positions. Additionally, one isopropyl group is also disordered. In the crystal, the cations are connected to the chloride ions via C—H[cdots, three dots, centered]Cl hydrogen bonds.
In the title compound, C27H37N2 +·Br−·2CH2Cl2, both the cation and the anion are located on a crystallographic mirror plane. Both of the dichloromethane solvent molecules show a disorder across a mirror plane over two equally occupied positions. In the crystal, the cations are connnected to the bromide ions via C—H[cdots, three dots, centered]Br hydrogen bonds.
The respiratory chain of Escherichia coli contains two different types of terminal oxidase that are differentially regulated as a response to changing environmental conditions. These oxidoreductases catalyze the reduction of molecular oxygen to water and contribute to the proton motive force. The cytochrome bo3 oxidase (cyt bo3) acts as the primary terminal oxidase under atmospheric oxygen levels, whereas the bd‐type oxidase is most abundant under microaerobic conditions. In E. coli, both types of respiratory terminal oxidase (HCO and bd‐type) use ubiquinol‐8 as electron donor. Here, we assess the inhibitory potential of newly designed and synthesized 3‐alkylated Lawson derivatives through L‐proline‐catalyzed three‐component reductive alkylation (TCRA). The inhibitory effects of these Lawson derivatives on the terminal oxidases of E. coli (cyt bo3 and cyt bd‐I) were tested potentiometrically. Four compounds were able to reduce the oxidoreductase activity of cyt bo3 by more than 50 % without affecting the cyt bd‐I activity. Moreover, two inhibitors for both cyt bo3 and cyt bd‐I oxidase could be identified. Based on molecular‐docking simulations, we propose binding modes of the new Lawson inhibitors. The molecular fragment benzyl enhances the inhibitory potential and selectivity for cyt bo3, whereas heterocycles reduce this effect. This work extends the library of 3‐alkylated Lawson derivatives as selective inhibitors for respiratory oxidases and provides molecular probes for detailed investigations of the mechanisms of respiratory‐chain enzymes of E. coli.
In the title compound, C27H19N3O4, the phenol and pyrazole rings are almost coplanar [dihedral angle = 0.95 (12)°] due to an intramolecular O—H ... N hydrogen bond, whereas the phenyl ring is tilted by 40.81 (7)° with respect to the plane of the pyrazole ring. The aromatic ring with a nitrophenoxy substituent makes a dihedral angle of 54.10 (7)° with the pyrazole ring.
The title compound, C22H28N2O6, crystallizes with four half-molecules in the asymmetric unit: each molecule is located about a crystallographic inversion centre. The central methylene groups of two molecules are disordered over two sets of equally occupied sites. The crystal packing is characterized by sheets of molecules parallel to (114).
The title compound, C25H22O5, was obtained by a dehydrogenative carbonylation reaction. It crystallizes with one half-molecule in the asymmetric unit. The molecules have crystallographic C2 symmetry and the two atoms of the carbonyl group are located on the rotation axis. The methoxy groups are coplanar with the benzene ring to which they are attached [C-C-O-C = 1.0 (6)°]. The two furan rings are inclined at 17.3 (3)° with respect to each other and the dihedral angle between the furan ring and the benzene ring is 75.83 (12)°. The crystal structure is stabilized by C-H...O hydrogen bonds. Key indicators: single-crystal X-ray study; T = 183 K; mean ( σ(C–C) = 0.006 Å; R factor = 0.081; wR factor = 0.195; data-to-parameter ratio = 13.4.
The Mg centre in the title compound, [MgBr2(C2H7N)3], is pentacoordinated in a trigonal-bipyramidal mode with the two Br atoms in axial positions and the N atoms of the dimethylamine ligands in equatorial positions. The MgII centre is located on a crystallographic twofold rotation axis. The crystal structure is stabilized by N—H⋯Br hydrogen bonds. The N atom and H atoms of one dimethylamine ligand are disordered over two equally occupied positions.
9-Bromo-9-borafluorene
(2010)
The title compound, C12H8BBr, crystallizes with three essentially planar molecules (r.m.s. deviations = 0.018, 0.020 and 0.021Å) in the asymmetric unit: since the title compound is rigid, there are no conformational differences between these three molecules. The crystal packing resembles a herringbone pattern.
Benzene solutions of Me3SnCl when exposed to moisture yield the adduct Me3SnCl·Me3SnOH·H2O. This adduct represents an intermediate in Me3SnCl hydrolysis. The structure of Me3SnCl·Me3SnOH·H2O features an array of Me3Sn units connected alternatingly by bridging Cl and OH ligands.
Organoboranes are among the most versatile and widely used reagents in synthetic chemistry. A significant further expansion of their application spectrum would be achievable if boron-containing reactive intermediates capable of inserting into C–H bonds or performing nucleophilic substitution reactions were readily available. However, current progress in the field is still hampered by a lack of universal design concepts and mechanistic understanding. Herein we report that the doubly arylene-bridged diborane(6) 1H2 and its B[double bond, length as m-dash]B-bonded formal deprotonation product Li2[1] can activate the particularly inert C(sp3)–H bonds of added H3CLi and H3CCl, respectively. The first case involves the attack of [H3C]− on a Lewis-acidic boron center, whereas the second case follows a polarity-inverted pathway with nucleophilic attack of the B[double bond, length as m-dash]B double bond on H3CCl. Mechanistic details were elucidated by means of deuterium-labeled reagents, a radical clock, α,ω-dihaloalkane substrates, the experimental identification of key intermediates, and quantum-chemical calculations. It turned out that both systems, H3CLi/1H2 and H3CCl/Li2[1], ultimately funnel into the same reaction pathway, which likely proceeds past a borylene-type intermediate and requires the cooperative interaction of both boron atoms.
The title compound, [FeZr2(C5H5)4Cl2(C13H18B2)], is a heteronuclear complex that consists of a [3]ferrocenophane moiety substituted at each cyclopentadienyl (Cp) ring by a BH3 group; the BH3 group is bonded via two H atoms to the Zr atom of the zirconocene chloride moiety in a bidentate fashion. The two Cp rings of the [3]ferrocenophane moiety are aligned at a dihedral angle of 8.9 (4)° arising from the strain of the propane-1,3-diyl bridge linking the two Cp rings. [One methylene group is disordered over two positions with a site-occupation factor of 0.552 (18) for the major occupied site.] The dihedral angles between the Cp rings at the two Zr atoms are 50.0 (3) and 51.7 (3)°. The bonding Zr(...)H distances are in the range 1.89 (7)–2.14 (7) Å. As the two Cp rings of the ferrocene unit are connected by an ansa bridge, the two Zr atoms approach each other at 6.485 (1) Å. The crystal packing features C—H(...)Cl interactions.
We have determined the crystal structures of two decachlorocyclopentasilanes, namely bis(tetra-n-butylammonium) dichloride decachlorocyclopentasilane dichloromethane disolvate, 2C16H36N+·2Cl−·Si5Cl10·2CH2Cl2, (I), and bis(tetraethylammonium) dichloride decachlorocyclopentasilane dichloromethane disolvate, 2C8H20N+·2Cl−·Si5Cl10·2CH2Cl2, (II), both of which crystallize with discrete cations, anions, and solvent molecules. In (I), the complete decachlorocyclopentasilane ring is generated by a crystallographic twofold rotation axis. In (II), one cation is located on a general position and the other two are disordered about centres of inversion. These are the first structures featuring the structural motif of a five-membered cyclopentasilane ring coordinated from both sides by a chloride ion. The extended structures of (I) and (II) feature numerous C—H⋯Cl interactions. In (II), the N atoms are located on centres of inversion and as a result, the ethylene chains are disordered over equally occupied orientations.
The geminal frustrated Lewis pair tBu2PCH2B(Fxyl)2 (1; Fxyl=3,5-(CF3)2C6H3) is accessible in 65 % yield from tBu2PCH2Li and (Fxyl)2BF. According to NMR spectroscopy and X-ray crystallography, 1 is monomeric both in solution and in the solid state. The intramolecular P⋅⋅⋅B distance of 2.900(5) Å and the full planarity of the borane site exclude any significant P/B interaction. Compound 1 readily activates a broad variety of substrates including H2, EtMe2SiH, CO2/CS2, Ph2CO, and H3CCN. Terminal alkynes react with heterolysis of the C−H bond. Haloboranes give cyclic adducts with strong P−BX3 and weak R3B−X bonds. Unprecedented transformations leading to zwitterionic XP/BCX3 adducts occur on treatment of 1 with CCl4 or CBr4 in Et2O. In less polar solvents (C6H6, n-pentane), XP/BCX3 adduct formation is accompanied by the generation of significant amounts of XP/BX adducts. FLP 1 catalyzes the hydrogenation of PhCH=NtBu and the hydrosilylation of Ph2CO with EtMe2SiH.
In the title compound, C11H14O4, an intermediate for the synthesis of a new kind of estrogen receptor modulator, all non-H atoms lie on a common plane (r.m.s. deviation = 0.0472 Å). All C-C bonds in the side chain are in a trans conformation, and the hydroxyl group is also trans to the methylene chain. In the crystal structure, molecules form centrosymmetric dimers showing a head-to-head arrangement which is stabilized by O-H...O hydrogen bonds. A weak C-H...O contact is also present.
NHC supersilyl silver complex [Ag(IPr)SitBu3] as a promising agent for substitution reactions
(2020)
The NHC supersilyl silver complex [Ag(IPr)SitBu3] (IPr = NHCIPr) was prepared by treatment of Ag(IPr)Cl with Na(thf)2[SitBu3] in benzene/thf at room temperature. X‐ray quality crystals of the NHC supersilyl silver complex [Ag(IPr)SitBu3] (monoclinic, space group P21/m) were grown from heptane at room temperature. The 29Si NMR spectrum of a solution of [Ag(IPr)SitBu3] in C6D6 revealed two doublets caused by coupling to 107Ag and 109Ag nuclei. We further investigated the possibility of a conversion of triel halides EX3 by treatment with [Ag(IPr)SitBu3]. At ambient temperature the reaction of [Ag(IPr)SitBu3] with an excess of EX3 yielded tBu3SiEX2 (E = B, Al; X = Cl, Br; E = Ga; X = Cl) and IPr·EX3 (EX3 = BCl3, BBr3, AlCl3, AlBr3, GaCl3). The identity of tBu3SiEX2 and IPr·EX3 was confirmed by comparison with authentic samples.
The exhaustive trichlorosilylation of hexachloro-1,3-butadiene was achieved in one step by using a mixture of Si2Cl6 and [nBu4N]Cl (7:2 equiv) as the silylation reagent. The corresponding butadiene dianion salt [nBu4N]2[1] was isolated in 36 % yield after recrystallization. The negative charges of [1]2− are mainly delocalized across its two carbanionic (Cl3Si)2C termini (α-effect of silicon) such that the central bond possesses largely C=C double-bond character. Upon treatment with 4 equiv of HCl, [1]2− is converted into neutral 1,2,3,4-tetrakis(trichlorosilyl)but-2-ene, 3. The Cl− acceptor AlCl3, induces a twofold ring-closure reaction of [1]2− to form a six-membered bicycle 4 in which two silacyclobutene rings are fused along a shared C=C double bond (84 %). Compound 4, which was structurally characterized by X-ray crystallography, undergoes partial ring opening to a monocyclic silacyclobutene 2 in the presence of HCl, but is thermally stable up to at least 180 °C.
The tetraaryl μ‐hydridodiborane(4) anion [2H]− possesses nucleophilic B−B and B−H bonds. Treatment of K[2H] with the electrophilic 9‐H‐9‐borafluorene (HBFlu) furnishes the B3 cluster K[3], with a triangular boron core linked through two BHB two‐electron, three‐center bonds and one electron‐precise B−B bond, reminiscent of the prominent [B3H8]− anion. Upon heating or prolonged stirring at room temperature, K[3] rearranges to a slightly more stable isomer K[3 a]. The reaction of M[2H] (M+=Li+, K+) with MeI or Me3SiCl leads to equimolar amounts of 9‐R‐9‐borafluorene and HBFlu (R=Me or Me3Si). Thus, [2H]− behaves as a masked [:BFlu]− nucleophile. The HBFlu by‐product was used in situ to establish a tandem substitution‐hydroboration reaction: a 1:1 mixture of M[2H] and allyl bromide gave the 1,3‐propylene‐linked ditopic 9‐borafluorene 5 as sole product. M[2H] also participates in unprecedented [4+1] cycloadditions with dienes to furnish dialkyl diaryl spiroborates, M[R2BFlu].
The title compound, [Li3(C4F9O)3(C3H6O)3], features an open Li/O cube with an Li ion missing at one corner. Three of the four bridging O atoms of the cube carry a fluorinated tert-butyl residue, whereas the fourth is part of an acetone molecule. Two of the Li atoms are further bonded to a non-bridging acetone molecule. Two of the lithium ion coordination geometries are very distorted LiO4 tetrahedra; the third could be described as a very distorted LiO3 T-shape with two distant F-atom neighbours. The Li[cdots, three dots, centered]Li contact distances for the three-coordinate Li+ ion [2.608 (14) and 2.631 (12) Å] are much shorter that the contact distance [2.940 (13) Å] between the tetrahedrally coordinated species.
The crystal structure of the title compound, Na[(C6F5)BH3], is composed of discrete anions and cations. The sodium cations are surrounded by four anions with three short Na...B [2.848 (8), 2.842 (7) and 2.868 (8) Å] and two short Na...F contacts [2.348 (5) and 2.392 (5) Å], forming a three-dimensional network. The anion is the first structural example of a pentafluorophenyl ring carrying a BH3 group.
SixGey alloys are emerging materials for modern semiconductor technology. Well-defined model systems of the bulk structures aid in understanding their intrinsic characteristics. Three such model clusters have now been realized in the form of the SixGey heteroadamantanes [0], [1], and [2] through selective one-pot syntheses starting from Me2GeCl2, Si2Cl6, and [nBu4N]Cl. Compound [0] contains six GeMe2 and four SiSiCl3 vertices, whereas one and two of the GeMe2 groups are replaced by SiCl2 moieties in compounds [1] and [2], respectively. Chloride-ion-mediated rearrangement quantitatively converts [2] into [1] at room temperature and finally into [0] at 60 °C, which is not only remarkable in view of the rigidity of these cage structures but also sheds light on the assembly mechanism.
Vicinally diiodinated polycyclic aromatic hydrocarbons (I2‐PAHs) are accessible from the corresponding diborylated B2‐PAHs through boron/iodine exchange. The B2‐PAHs have been prepared via twofold electrophilic borylation reactions templated by a vicinally disilylated benzene. Our protocol is applicable to fluorenes, acenes, annulated acenes, oligoaryls, and even [5]helicene. Using B2‐naphthalene as the example, we have shown that the reaction scope can, in principle, be expanded to include the synthesis of vicinally dibrominated and dihydroxylated PAHs. The usefulness of the building blocks provided by our method in the field of optoelectronic materials was demonstrated by the successful conversion of I2‐fluoranthene to the analogous doubly alkynylated fluoranthene emitter.
The crystal structure of the title compound, hexa-μ2-bromido-μ4-oxido-tetrakis[(diethyl ether)magnesium], [Mg4Br6O(C4H10O)4], determined from data measured at 173 K, differs from the previously known structure of diethyl ether magnesium oxybromide, which was determined from room-temperature data [Stucky & Rundle (1964 [triangle]). J. Am. Chem. Soc. 86, 4821–4825]. The title compound crystallizes in the tetragonal space group I An external file that holds a picture, illustration, etc. Object name is e-67-m1614-efi7.jpg, whereas the previously known structure crystallizes in a different tetragonal space group, namely P An external file that holds a picture, illustration, etc. Object name is e-67-m1614-efi7.jpg21 c. Both molecules have crystallographic An external file that holds a picture, illustration, etc. Object name is e-67-m1614-efi7.jpg symmetry and show almost identical geometric parameters for the Mg, Br and O atoms. The crystal of the title compound turned out to be a merohedral twin emulating a structure with apparent Laue symmetry 4/mmm, whereas the correct Laue group is just 4/m. The fractional contribution of the minor twin component converged to 0.462 (1).
Two subvalent, redox-active diborane(4) anions, [3]4− and [3]2−, carrying exceptionally high negative charge densities are reported: Reduction of 9-methoxy-9-borafluorene with Li granules without stirring leads to the crystallization of the B(sp3)−B(sp2) diborane(5) anion salt Li[5]. [5]− contains a 2,2′-biphenyldiyl-bridged B−B core, a chelating 2,2′-biphenyldiyl moiety, and a MeO substituent. Reduction of Li[5] with Na metal gives the Na+ salt of the tetraanion [3]4− in which two doubly reduced 9-borafluorenyl fragments are linked via a B−B single bond. Comproportionation of Li[5] and Na4[3] quantitatively furnishes the diborane(4) dianion salt Na2[3], the doubly boron-doped congener of 9,9′-bis(fluorenylidene). Under acid catalysis, Na2[3] undergoes a formal Stone–Wales rearrangement to yield a dibenzo[g,p]chrysene derivative with B=B core. Na2[3] shows boron-centered nucleophilicity toward n-butyl chloride. Na4[3] produces bright blue chemiluminescence when exposed to air.
The asymmetric unit of the title compound, C28H42N2O5·H2O, consists of one half of the organic molecule and one half-molecule of water, both of which are located on a mirror plane which passes through the central C atoms and the hydroxyl group of the heterocyclic system. The hydroxyl group at the central ring is disordered over two equally occupied positions. The six-membered ring adopts a chair conformation, and the 2-hydroxybenzyl substituents occupy the sterically preferred equatorial positions. The aromatic rings make dihedral angles of 75.57 (9)° with the mean plane of the heterocyclic ring. The dihedral angle between the two aromatic rings is 19.18 (10)°. The molecular structure features two intramolecular phenolic O-H...N hydrogen bonds with graph-set motif S(6). In the crystal, molecules are connected via O-H...O hydrogen bonds into zigzag chains running along the a-axis direction.
Synthesis and crystal structure of 2-(2-hydroxyphenyl)-1,3-bis(4-methoxybenzyl)-1,3-diazinan-5-ol
(2022)
The redetermined structure of 2-(2-hydroxyphenyl)-1,3-bis(4-methoxybenzyl)-1,3-diazinan-5-ol, C26H30N2O4, at 173 K has orthorhombic (Pbca) symmetry. It was previously described by Bolte et al. [ Private Communication (refcode EWICEV). CCDC, Cambridge, England]. The title compound resulted from the condensation reaction between 1,3-bis{[(4-methoxyphenyl)methyl]amino}propan-2-ol and 2-hydroxybenzaldehyde in CH3OH. The structure exhibits disorder. One of the 4-methoxybenzyl groups, the hydroxy group bonded to the 1,3-diazinan ring, and the methyl group of the methoxy residue are disordered over two orientations, with occupancies of 0.807 (3)/0.193 (3), 0.642 (5)/0.358 (5), and 0.82 (4)/0.18 (4), respectively. The dihedral angles between the mean planes of the central 1,3-diazinan-5-ol and the 4-methoxyphenyl rings (both occupancy components of the disordered ring) are 88.65 (13), 85.79 (14) and 83.4 (7)°. The crystal packing is sustained by C—H...O and O—H...π interactions, giving rise to infinite chains running along the b-axis direction.
The title compound, C8H16N4·2C11H16O, was synthesized from the corresponding sterically crowded phenol by treatment with the aminal cage polyamine. Single-crystal X-ray diffraction structural analysis revealed the three-molecule aggregate to crystallize in the monoclinic space group P2/c with one half of a 1,3,6,8-tetraaztricyclo[4.4.1.13,8]dodecane (TATD) molecule and one 2-tert-butyl-4-methylphenol molecule per asymmetric unit. The crystal structure features intermolecular O—H...N and C—H...O hydrogen bonds, as well as intermolecular C—H...π interactions.
First crystal structure of a Pigment Red 52 compound: DMSO solvate hydrate of the monosodium salt
(2021)
Pigment Red 52, Na2[C18H11ClN2O6S], is an industrially produced hydrazone-laked pigment. It serves as an intermediate in the synthesis of the corresponding Ca2+ and Mn2+ salts, which are used commercially for printing inks and lacquers. Hitherto, no crystal structure of any salt of Pigment Red 52 is known. Now, single crystals have been obtained of a dimethyl sulfoxide solvate hydrate of the monosodium salt of Pigment Red 52, namely, monosodium 2-[2-(3-carboxy-2-oxo-1,2-dihydronaphthalen-1-ylidene)hydrazin-1-yl]-5-chloro-4-methylbenzenesulfonate dimethyl sulfoxide monosolvate monohydrate, Na+·C18H12ClN2O6S−·H2O·C2H6OS, obtained from in-house synthesized Pigment Red 52. The crystal structure was determined by single-crystal X-ray diffraction at 173 K. In this monosodium salt, the SO3− group is deprotonated, whereas the COOH group is protonated. The residues form chains via ionic interactions and hydrogen bonds. The chains are arranged in polar/non-polar double layers.
The aromatic rings in the title compound, C13H8ClNO4, enclose a dihedral angle of 39.53 (3)°. The nitro group is almost coplanar with the ring to which it is attached [dihedral angle = 4.31 (1)°]. In the crystal, molecules are connected by C-H...O hydrogen bonds into chains running along [001]. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A°; R factor = 0.044; wR factor = 0.105; data-to-parameter ratio = 18.9.
The complete molecule of the title compound, C18H24N2O2, is generated by a crystallographic inversion centre. The torsion angles in the hexamethylene chain are consistent with an antiperiplanar conformation, whereas the conformation of the O—CH2—CH2—CH2 unit is gauche. The three-dimensional crystal packing is stabilized by N—H⋯O and N—H⋯N hydrogen bonding.
The title compound, C17H18N2O6, crystallizes with two molecules in the asymmetric unit. In both molecules, one of the C-C bonds of the pentamethylene chain connecting the two aromatic rings is in a trans conformation and another displays a gauche conformation. The aromatic rings within each molecule are nearly coplanar [dihedral angles = 3.36 (9) and 4.50 (9)°] and the nitro groups are twisted slightly out of the planes of their attached rings [dihedral angles = 8.16 (3)/6.6 (2) and 4.9 (4)/3.8 (3)°]. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.040; wR factor = 0.101; data-to-parameter ratio = 13.5.
In the title compound, C27H20F6N2O2, the dihedral angles between the planes of the aromatic rings connected by the ether O atoms are 84.13 (8) and 75.06 (9)°. The crystal structure is stabilized by N-H...O and N-H...F hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.037; wR factor = 0.088; data-to-parameter ratio = 8.2.
The title compound, C15H14N2O4, is an important intermediate for the synthesis of thermotropic liquid crystals. The dihedral angle between the two aromatic rings is 84.29 (4)°. An N-H...O hydrogen bond connects the molecules into chains running along the b axis. In addition, the crystal packing is stabilized by weak C-H...O hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.036; wR factor = 0.096; data-to-parameter ratio = 14.3.
4-(4-Nitrophenoxy)biphenyl
(2009)
The two phenyl rings of the biphenyl unit of the title compound, C18H13NO3, are almost coplanar [dihedral angle 6.70 (9)°]. The nitrophenyl ring, on the other hand, is significantly twisted out of the plane of the these two rings, making dihedral angles of 68.83 (4)° with the middle ring and 62.86 (4)° with the end ring. The nitro group is twisted by 12.1 (2)° out of the plane of the phenyl ring to which it is attached. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A° ; R factor = 0.040; wR factor = 0.118; data-to-parameter ratio = 12.8.
6-(4-Nitrophenoxy)hexanol
(2009)
The title compound, C12H17NO4, features an almost planar molecule (r.m.s. deviation for all non-H atoms = 0.070 Å). All methylene C-C bonds adopt an antiperiplanar conformation. In the crystal structure the molecules lie in planes parallel to (1\overline{1}2) and the packing is stabilized by O-H...O hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.066; wR factor = 0.185; data-to-parameter ratio = 13.2.
In the title compound, C13H10N2O2, a Schiff base derivative, the dihedral angle between the two aromatic rings is 31.58 (3)°. The C=N double bond is essentially coplanar with the nitrophenyl ring. The torsion angle of the imine double bond is 175.97 (13)°, indicating that the C=N double bond is in a trans configuration. The crystal structure is stabilized by C-H...O contacts and [pi]-[pi] interactions (centroid-centroid distances of 3.807 and 3.808 Å). Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.034; wR factor = 0.093; data-to-parameter ratio = 10.3.