Refine
Year of publication
Document Type
- Article (59)
Has Fulltext
- yes (59)
Is part of the Bibliography
- no (59)
Keywords
- Immunological methods (5)
- Immunologische Methoden (5)
- Postural control (5)
- Diagnostics (4)
- Diagnostik (4)
- Kinematic analysis (4)
- MSD (4)
- dentist (4)
- prevalence (4)
- Healthy adults (3)
Institute
- Medizin (59)
- Sportwissenschaften (10)
- Biochemie und Chemie (2)
- Psychologie (1)
- Psychologie und Sportwissenschaften (1)
Introduction: Curare is one of the best-examined neurotoxins of the world, which has empirically been used for centuries by American Indigenes. Research on curare has been performed much later, a global scientometric analysis on curare research or its derivates does not yet exist. This bibliometric analysis is part of the global NewQis-project and should illuminate both toxic and historic issues of research on curare.
Methods: The ISI Web of Science was searched for data covering 1900 to 2013 using a term which included as many original articles on curare as possible. 3,867 articles were found and analyzed for common bibliometric items such as the number of citations, language of the articles or the (modified) Hirsch-Index (h-index). Results are illustrated utilizing modern density equalizing map projections (DEMP) or beam diagrams.
Results: Most publications were located in North America and Europe. The USA has the highest number of publications as well as the highest h-index. The number of publications overall rose until the late 1990s and later decreased. Furthermore, sudden increases of research activity are ascribable to historic events, like the first use of curare as muscle relaxant during surgery.
Discussion: This scientometric analysis of curare research reflects several tendencies as previously seen in other bibliometric investigations, i.e. the scientific quality standard of North America and Europe. Research on curare decreased however, due to the declining attention towards this muscle relaxant. This work exemplifies also how scientometric methods can be used to illuminate historic circumstances immediately stimulating scientific research.
Introduction: The effects of manipulated dental occlusion on body posture has been investigated quite often and discussed controversially in the literature. Far less attention has been paid to the influence of dental occlusion position on human movement. If human movement was analysed, it was mostly while walking and not while running. This study was therefore designed to identify the effect of lower jaw positions on running behaviour according to different dental occlusion positions.
Methods: Twenty healthy young recreational runners (mean age = 33.9±5.8 years) participated in this study. Kinematic data were collected using an eight-camera Vicon motion capture system (VICON Motion Systems, Oxford, UK). Subjects were consecutively prepared with four different dental occlusion conditions in random order and performed five running trials per test condition on a level walkway with their preferred running shoes. Vector based pattern recognition methods, in particular cluster analysis and support vector machines (SVM) were used for movement pattern identification.
Results: Subjects exhibited unique movement patterns leading to 18 clusters for the 20 subjects. No overall classification of the splint condition could be observed. Within individual subjects different running patterns could be identified for the four splint conditions. The splint conditions lead to a more symmetrical running pattern than the control condition.
Discussion: The influence of an occlusal splint on running pattern can be confirmed in this study. Wearing a splint increases the symmetry of the running pattern. A more symmetrical running pattern might help to reduce the risk of injuries or help in performance. The change of the movement pattern between the neutral condition and any of the three splint conditions was significant within subjects but not across subjects. Therefore the dental splint has a measureable influence on the running pattern of subjects, however subjects individuality has to be considered when choosing the optimal splint condition for a specific subject.
BACKGROUND: Geographical variation of the general practitioner (GP) workforce is known between rural and urban areas. However, data about the variation between and within urban areas are lacking.
METHOD: We analyzed distribution patterns of GP full time equivalents (FTE) in German cities with a population size of more than 500,000. We correlated their distribution with area measures of social deprivation in order to analyze preferences within neighborhood characteristics. For this purpose, we developed two area measures of deprivation: Geodemographic Index (GDI) and Cultureeconomic Index (CEI).
RESULTS: In total n = 9034.75 FTE were included in n = 14 cities with n = 171 districts. FTE were distributed equally on inter-city level (mean: 6.49; range: 5.12-7.20; SD: 0.51). However, on intra-city level, GP distribution was skewed (mean: 6.54; range: 1.80-43.98; SD: 3.62). Distribution patterns of FTE per 10^4 residents were significantly correlated with GDI (r = -0.49; p < 0.001) and CEI (r = -0.22; p = 0.005). Therefore, location choices of GPs were mainly positively correlated with 1) central location (r = -0.50; p < 0.001), 2) small household size of population (r = -0.50; p < 0.001) and 3) population density (r = 0.35; p < 0.001).
CONCLUSION: Intra-city distribution of GPs was skewed, which could affect the equality of access for the urban population. Furthermore, health services planners should be aware of GP location preferences. This could be helpful to better understand and plan delivery of health services. Within this process the presented Geodemographic Index (GDI) could be of use.
Motion analysis in the field of dentistry : a kinematic comparison of dentists and orthodontists
(2016)
Objectives: To conduct a kinematic comparison of occupational posture in orthodontists and dentists in their workplace.
Design: Observational study.
Setting: Dentist surgeries and departments of orthodontics at university medical centres in Germany.
Participants: A representative sample of 21 (10 female, 11 male) dentists (group G1) and 21 (13 female, 8 male) orthodontists (G2) with one male dropout in G2.
Outcome measures: The CUELA (computer-assisted acquisition and long-term analysis of musculoskeletal loads) system was used to analyse occupational posture. Parallel to the recording through the CUELA system, a software-supported analysis of the activities performed (I: treatment; II: office; III: other activities) was carried out. In line with ergonomic standards the measured body angles are categorised into neutral, moderate and awkward postures. Activities between the aforementioned groups are compared using the stratified van Elteren U test and the Wilcoxon–Mann–Whitney U test. All p values are subject to the Bonferroni–Holm correction. The level of significance is set at 5%.
Results: The percentage of time spent on activities in categories I–II–III was as follows: dentists 41%–23%–36% and orthodontists 28%–37%–35%. The posture analysis of both groups showed, for all percentiles (P5–95), angle values primarily in the neutral or moderate range. However, depending on the activity performed, between 5% and 25% of working hours were spent in unfavourable postures, especially in the head-and-neck area. Orthodontists have a greater tendency than dentists to perform treatment activities with the head and torso in unfavourable positions. The statistically significant differences between the two groups with regard to the duration and the relevance of the activities performed confirm this assumption for all three categories (p<0.01, p<0.05).
Conclusions: Generally, both groups perform treatment activities in postures that are in the neutral or medium range; however, dentists had slightly more unfavourable postures during treatment for a greater share of their work day.
Objective: Worldwide, the respiratory syncytial virus (RSV) represents the predominant viral agent causing bronchiolitis and pneumonia in children. To conduct research and tackle existing healthcare disparities, RSV-related research activities around the globe need to be described. Hence, we assessed the associated scientific output (represented by research articles) by geographical, chronological and socioeconomic criteria and analysed the authors publishing in the field by gender. Also, the 15 most cited articles and the most prolific journals were identified for RSV research.
Design: Retrospective, descriptive study.
Setting: The NewQIS (New Quality and Quantity Indices in Science) platform was employed to identify RSV-related articles published in the Web of Science until 2013. We performed a numerical analysis of all articles, and examined citation-based aspects (eg, citation rates); results were visualised by density equalising mapping tools.
Results: We identified 4600 RSV-related articles. The USA led the field; US-American authors published 2139 articles (46.5%% of all identified articles), which have been cited 83 000 times. When output was related to socioeconomic benchmarks such as gross domestic product or Research and Development expenditures, Guinea-Bissau, The Gambia and Chile were ranked in leading positions. A total of 614 articles on RSV (13.34% of all articles) were attributed to scientific collaborations. These were primarily established between high-income countries. The gender analysis indicated that male scientists dominated in all countries except Brazil.
Conclusions: The majority of RSV-related research articles originated from high-income countries whereas developing nations showed only minimal publication productivity and were barely part of any collaborative networks. Hence, research capacity in these nations should be increased in order to assist in addressing inequities in resource allocation and the clinical burden of RSV in these countries.
Objectives The following study analyses the influence of risk factors among the occupational group of truck drivers on postural control and body mass index (BMI).
Design Observational study.
Setting One motorway station close to several highways in Germany.
Participants 180 truck drivers (177 male/3 female), aged 21–65 years old, took part in this study.
Outcome measures Postural control was examined using a pressure plate. In order to examine the influence of body weight (BMI) and working years on postural control, subjects were divided into samples of five and three groups, respectively. Furthermore, it was evaluated whether the subjects suffered from back pain. For data analysis, the Kruskal-Wallis test was used as the data were not normally distributed. Once the p value of the Kruskal-Wallis test was p≤0.05, the Conover-Iman comparison and afterwards the Bonferroni-Holm correction were used. The significance level was set at α ≤0.05.
Results Regarding the number of working years, a significant increase of frontal (p≤0.04) and sagittal (p≤0.001) sway were observed. The correlation of the five BMI groups with the number of working years demonstrates that an increase of the working years leads to an increase of BMI (p≤0.03). Furthermore, the majority of truck drivers participating in this study suffered from back pain (61.7%).
Conclusions BMI and musculoskeletal impairment are indicators of health risk factors. In this study, it is shown that an increasing number of working years and an increasing BMI lead to a decrease in frontal and sagittal postural sway. In addition, the number of working years correlates with body weight and back pain.
Fit to play : posture and seating position analysis with professional musicians - a study protocol
(2017)
Background: Musical performance-associated musculoskeletal disorders (MSD) are a common health problem among professional musicians. Considering the manifold consequences arising for the musicians, they can be seen as a threat for their professional activity. String players are the most affected group of musicians in this matter. Faults in upper body posture while playing the instrument, causing un-ergonomic static strain on the back and unergonomic limp-movements, are a main reason for musculoskeletal disorders and pain syndromes.
Methods: A total of 66 professional musicians, divided into three groups, are measured.
The division is performed by average duration of performance, intensity of daily exercise and professional experience. Video raster stereography, a three-dimensional analysis of the body posture, is used to analyse the instrument-specific posture. Furthermore the pressure distribution during seating is analysed. Measurements are performed because the musician is sitting on varying music chairs differing in structure and/or construction of the seating surface. The measurements take place in habitual seating position as well as during playing the instrument.
Results: To analyse the influence of different chairs, ANOVA for repeated measurements or Friedman-test is used, depending on normality assumptions. Comparison of posture between amateur musicians, students, and professional orchestral musicians is carried out the non-parametric Jonckheere-Terpstra-test.
Conclusions: Our method attempts to give the musicians indications for the right music chair choice by analyzing the chair concepts, so that thereby preemptively MSD can be reduced or prevented.
Kinematic analysis of work-related musculoskeletal loading of trunk among dentists in Germany
(2017)
BACKGROUND: In Germany, about 86.7 % of the dentists have stated to suffer from pain in the neck and shoulder region. These findings are predominantly based on surveys. Therefore the objective of this study is to conduct a kinematic analysis of occupational posture in dentistry.
METHODS: Twenty one dentists (11 f/10 m; age: 40.1 ± 10.4 years) have participated in this examination. The CUELA-System was used to collect kinematic data of the activities on an average dental workday. A detailed, computer-based task analysis took place parallel to the kinematic examination. Through the synchronization of data collected from both measurements, patterns of posture were arranged chronologically and in conjunction with the tasks performed: (I) "treatment" (II) "office" and (III) "other activities". For the data analysis, characteristic data of joint angular distributions (percentiles P05, P25, P50, P75 and P95) of head, neck and torso at pre-defined tasks were examined and assessed corresponding to ergonomic standards.
RESULTS: Forty one percent of tasks executed on an average dental workday can be categorized as the treatment of patients. These tasked are most frequently performed in "straight back" positions (78.7 %), whereas 20.1 % were carried out in a "twisted or inclined" torso posture, 1.1 % "bowed" and only 0.1 % "bowed and twisted/inclined to the side" upper body position. In particular, it can be observed that in the area of the cervical and thoracic spine the 75th and 95th percentile show worse angular values during treatment than during non-dental tasks. For the period of treatment (at a standardized dental chair construction), a seated position with a strong inclination of the thoracic spine to the right while the lumbar spine is inclined towards the left is adopted.
CONCLUSION: The kinematic analysis of dentists illustrates typical patterns of postures during tasks that are essential to the dental treatment of patients. The postures in the area of the cervical and thoracic spine have higher angular values during treatment compared to other dental tasks. Consistently, appropriate ergonomic design measures to optimize the dental chair and equipment as well as integrated training in ergonomics as part of the study of dentistry to prevent musculoskeletal are recommended.
Background: This study aims at identifying orthodontic activities with the highest frequency of unfavorable/awkward and static postures held over a period of more than 4 s based on kinematic analysis. Moreover, a separate analysis of static postures for orthodontic and non-orthodontic activities serves to evaluate the duration for which these particular postures are assumed.
Methods: In total, 21 (13f/8 m) orthodontists (age: 31.5 ± 3.8 years) participated in this study. CUELA, a personal measurement system, was used to collect kinematic data for all orthodontic activities in a working day. Angle values of the head and torso were evaluated in accordance with ergonomic standards. Only those postures that were held statically for 4 s and longer were selected for further analysis. Alongside the kinematic analysis, the activities performed on-site were also subject to a detailed computerized analysis. The synchronization of data collected from both measurements arranges the patterns of posture found chronologically and in conjunction with the orthodontic activities performed ((I) "treatment" (II) "office" and (III) "other activities").
Results: For (I) we observed an anterior inclination of the head and torso area as well as a twist of the head and neck area to the right. We found anterior back inclination and lateral back torsion to the right for (II) and (III). If, furthermore, we differentiate the duration of static postures, there are primarily short to medium-term (4–30s) static postures identified for (I). Also, categories (II) and (III) predominantly demonstrate static back postures with a duration of up to 30 s. With regard to (II) we observed that the back is ventrally inclined for 10.1% of the total activity duration.
Conclusions: During treatment static strains are observed in the entire head and torso area. On the contrary, static postures prevalent in the torso area are essential for activities of the other categories, particularly office work. These findings allow for a careful selection of unfavorable and static postures for each of the activities performed and help to develop specific preventive measures.
Background: How a dentist works, such as the patterns of movements performed daily, is also largely affected by the workstation Dental tasks are often executed in awkward body positions, thereby causing a very high degree of strain on the corresponding muscles. The objective of this study is to detect those dental tasks, during which awkward postures occur most frequently. The isolated analysis of static postures will examine the duration for which these postures are maintained during the corresponding dental, respectively non-dental, activities.
Methods: 21 (11f/10 m) dentists (age: 40.1 ± 10.4 years) participated in this study. An average dental workday was collected for every subject. To collect kinematic data of all activities, the CUELA system was used. Parallel to the kinematic examination, a detailed computer-based task analysis was conducted. Afterwards, both data sets were synchronized based on the chronological order of the postures assumed in the trunk and the head region. All tasks performed were assigned to the categories "treatment" (I), "office" (II) and "other activities" (III). The angle values of each body region (evaluation parameter) were examined and assessed corresponding to ergonomic standards. Moreover, this study placed a particular focus on static positions, which are held statically for 4 s and longer.
Results: For "treatment" (I), the entire head and trunk area is anteriorly tilted while the back is twisted to the right, in (II) and (III) the back is anteriorly tilted and twisted to the right (non-neutral position). Static positions in (I) last for 4–10s, static postures (approx. 60%) can be observed while in (II) and (III) in the back area static positions for more than 30 s are most common. Moreover, in (II) the back is twisted to the right for more than 60 s in 26.8%.
Conclusion: Awkward positions are a major part of a dentists’ work. This mainly pertains to static positions of the trunk and head in contrast to "office work." These insights facilitate the quantitative description of the dentist profession with regard to the related physical load along with the health hazards to the musculoskeletal system. Moreover, the results allow for a selective extraction of the most unfavorable static body positions that dentists assume for each of the activities performed.