Refine
Year of publication
Document Type
- Article (39)
- Preprint (20)
- Conference Proceeding (1)
- Doctoral Thesis (1)
Language
- English (61)
Has Fulltext
- yes (61)
Is part of the Bibliography
- no (61)
Keywords
- e +-e − Experiments (5)
- Particle and Resonance Production (3)
- BESIII (2)
- CC16 (2)
- Complication management (2)
- Exotics (2)
- Fistula (2)
- Flaps (2)
- Grafts (2)
- Maxillary sinus (2)
Institute
- Physik (40)
- Medizin (19)
- Biochemie, Chemie und Pharmazie (1)
- Extern (1)
Objectives: Whereas stationary stability of implants has been postulated for decades, recent studies suggested a phenomenon termed implant migration. This describes a change in position of implants as a reaction to applied forces. The present study aims at employing image registration of in vivo micro‐CT scans from different time points and to assess (a) if migration of continuously loaded implants is possible and (b) migration correlates with the force magnitude.
Material and methods: Two customized machined implants were placed in the dorsal portion of caudal vertebrae in n = 61 rats and exposed to standardized forces (0.5 N, 1.0 N, and 1.5 N) applied through a flat nickel–titanium contraction spring, or no forces (control). Micro‐CT scans were performed at 0, 1, 2, 4, 6, and 8 weeks after surgery. The baseline image was registered with the forthcoming scans. Implant migration was measured as the Euclidean distance between implant tips. Bone remodeling was assessed between the baseline and the forthcoming scans.
Results: The findings confirmed a positional change of the implants at 2 and 8 weeks of healing, and a linear association between applied force and velocity of movement (anterior implant: χ2 = 12.12, df = 3, and p = .007 and posterior implant: χ2 = 20.35, df = 3, and p < .001). Bone apposition was observed around the implants and accompanied by formation of load‐bearing trabeculae and a general cortical thickening close and also distant to the implants.
Conclusion: The present analysis confirmed that implants can migrate in bone. The applied forces seemed to stimulate bone thickening, which could explain why implants migrate without affecting stability.
Efficacy of platelet-rich fibrin in promoting the healing of extraction sockets: a systematic review
(2021)
Purpose: To address the focused question: in patients with freshly extracted teeth, what is the efficacy of platelet-rich fibrin (PRF) in the prevention of pain and the regeneration of soft tissue and bone compared to the respective control without PRF treatment?
Methods: After an electronic data search in PubMed database, the Web of Knowledge of Thomson Reuters and hand search in the relevant journals, a total of 20 randomized and/or controlled studies were included.
Results: 66.6% of the studies showed that PRF significantly reduced the postoperative pain, especially in the first 1–3 days after tooth extraction. Soft tissue healing was significantly improved in the group of PRF compared to the spontaneous wound healing after 1 week (75% of the evaluated studies). Dimensional bone loss was significantly lower in the PRF group compared to the spontaneous wound healing after 8–15 weeks but not after 6 months. Socket fill was in 85% of the studies significantly higher in the PRF group compared to the spontaneous wound healing.
Conclusions: Based on the analyzed studies, PRF is most effective in the early healing period of 2–3 months after tooth extraction. A longer healing period may not provide any benefits. The currently available data do not allow any statement regarding the long-term implant success in sockets treated with PRF or its combination with biomaterials. Due to the heterogeneity of the evaluated data no meta-analysis was performed.
We present an architecture for the integration of shallow and deep NLP components which is aimed at flexible combination of different language technologies for a range of practical current and future applications. In particular, we describe the integration of a high-level HPSG parsing system with different high-performance shallow components, ranging from named entity recognition to chunk parsing and shallow clause recognition. The NLP components enrich a representation of natural language text with layers of new XML meta-information using a single shared data structure, called the text chart. We describe details of the integration methods, and show how information extraction and language checking applications for realworld German text benefit from a deep grammatical analysis.
Radiographic outcomes following lateral alveolar ridge augmentation using autogenous tooth roots
(2018)
Background: To assess and compare the radiographic outcomes following lateral alveolar ridge augmentation using autogenous tooth roots (TR) and autogenous bone (AB) blocks.
Methods: In a total of 30 patients, lateral ridge augmentation was conducted in parallel groups using either (1) healthy autogenous tooth roots (e.g., retained wisdom or impacted teeth) (n = 15) or (2) cortical autogenous bone blocks harvested from the retromolar area. Cone-beam computed tomographic (CBCT) scans taken at 26 weeks of submerged healing were analyzed for the basal graft integration (i.e., contact between the graft and the host bone in %) (BI26) and the cross-sectional grafted area (mm2) (SA26).
Results: Both groups revealed a comparable clinical width of the alveolar ridge at baseline (CWb). Mean BI26 and SA26 values amounted to 69.26 ± 26.01% (median 72.44) and 22.07 ± 12.98 mm2 (median 18.83) in the TR group and 79.67 ± 15.66% (median 78.85) and 12.42 ± 10.11 mm2 (median 11.36) in the AB group, respectively. Between-group differences in mean SA26 values were statistically significant (p = 0.031). Linear regression analysis failed to reveal any significant correlations between BI26 and CWb/SA26 values in either group.
Conclusions: TR grafts may be associated with improved SA26 values following lateral alveolar ridge augmentation.
Trial registration: DRKS00009586. Registered 10 February 2016.
An oroantral fistula (OAF) is a pathological abnormal communication between the oral cavity and the maxillary sinus which may arise as a result of failure of primary healing of an OAF, dental infections, osteomyelitis, radiation therapy, trauma, or iatrogenic complications. With the presence of a fistula, the maxillary sinus is permanently open. Microbial flora passes from the oral cavity into the maxillary sinus, and the inflammation of the sinus occurs with all potential consequences. In literature, various techniques have been proposed for closure of OAFs. Due to the heterogeneity of the data and techniques found, we opted for a narrative review to highlight the variety of techniques discussed in the literature. Techniques of particular interest include the bone sandwich with resorbable guided tissue regeneration (GTR) membrane and platelet-rich fibrin (PRF) used alone as both a clot and a membrane. The great advantage of these techniques is that no donor site surgery is necessary, making the outcome valuable in terms of time savings, cost and, more importantly, less discomfort to the patient. Additionally, both bony and soft tissue closure is performed for OAF, in contrast to flaps, which are typically used for procedures in the sinus area. The reconstructed bony tissue regenerated from these techniques will also be appropriate for endosseous dental implantation.
Objectives: To evaluate peri-implant tissue dimensions following nonsurgical (NS) and surgical therapy (S) employing different decontamination protocols of advanced ligature-induced peri-implantitis in dogs.
Material & Methods: Peri-implantitis defects (n = 5 dogs, n = 30 implants) were randomly and equally allocated in a split-mouth design to NS or S treatment using either an Er:YAG laser (ERL), an ultrasonic device (VUS), or plastic curettes + local application of metronidazole gel (PCM), respectively. Horizontal bone thickness (hBT) and soft tissue thickness (hMT) were measured at different reference points: (v0) at the marginal portion of the peri-implant mucosa (PM); (v1) at 50% of the distance from PM to bone crest (BC); (v2) at the BC; (v3) at the most coronal extension of the bone-to-implant contact. Vertical peri-implant tissue height was calculated from PM to BC.
Results: All of the treatment groups showed a gradual hMT increase from v0 to the v2 reference point, followed by a reduction from v2 to the v3 region. The S-VUS subgroup tended to be associated with higher hMT values at the v0 region than the NS-VUS subgroup (0.44 mm versus 0.31 mm). PM-BC distance varied from 2.22 to 2.83 mm in the NS group, and from 2.07 to 2.38 in the S group.
Conclusion: Vertical and horizontal peri-implant tissue dimensions were similar in different treatment groups.
Background: To volumetrically assess the bone microstructure following vertical alveolar ridge augmentation using differently conditioned autogenous tooth roots (TR) and second‐stage implant placement.
Materials and methods: The upper premolars were bilaterally extracted in n = 4 beagle dogs and randomly assigned to either autoclavation (TR‐A) or no additional treatment (TR‐C). Subsequently, TR were used as block grafts for vertical alveolar ridge augmentation in both lower quadrants. At 12 weeks, titanium implants were inserted and left to heal 3 weeks. Microcomputed tomography was used to quantify bone volume per tissue volume (BV/TV), trabecular thickness (Tb.Th), and trabecular spacing (Tb.Sp) at vestibular (v) and oral (o) aspects along the implant and in the augmented upper half of the implant, respectively.
Results: Median BV/TV [TR‐C: 51.33% (v) and 70.42% (o) vs TR‐A: 44.05% (v) and 64.46% (o)], Tb.th [TR‐C: 0.22 mm (v) and 0.27 mm (o) vs TR‐A: 0.23 mm (v) and 0.29 mm (o)] and Tb.Sp [TR‐C: 0.26 mm (v) and 0.13 mm (o) vs TR‐A: 0.29 μm (v) and 0.15 mm (o)] values were comparable in both groups.
Conclusion: Both TR‐C and TR‐A grafts were associated with a comparable bone microstructure within the grafted area.
Diseases such as cardiac arrhythmias, CPVT and other issues of the human heart still remain largely unexplored. To contribute to this field of research, it is necessary to create tools to control the spatial and temporal release and reuptake of Ca2+ from the sarcoplasmic/endoplasmic reticulum (SR/ER). Ca2+ release and uptake by the ryanodine receptor (RyR) and Sarcoplasmic/endoplasmic reticulum calcium ATPase (SERCA), respectively, are essential for the function of excitable cells. In this process, the rapid Ca2+ release from the SR/ER and the associated contraction in muscle cells is modulated by RyR. However, diseases due to calcium leakage, such as cardiac arrhythmias, seizures and contractile dysfunction, are also caused by RyR. The resting Ca2+ concentration in the cytosol, which is important for the cell, is kept in balance by Ca2+ release and reuptake into the SR/ER. This reuptake is controlled quite considerably by SERCA. SERCA is important for development and muscle function in both nematodes such as C. elegans and mammals, though there is also a great need for tools that can help study precise function.
To advance towards the goal of developing tools for optogenetic stimulation of intracellular Ca2+ release from the SR/ER, the model organism C. elegans was chosen. Its advantages are the fully sequenced genome and the neural network connectome. In addition, the ease of maintenance, self-fertilisation, transparency and rapid generation cycles, as well as the fact that it is a eutelic animal, are advantages for the application of the optogenetic approach.
So far, tools for light-induced Ca2+ release (LICR) have already been developed, involving the creation of ChR2 versions with higher Ca2+ conductivity based on the "CatCh" variant and further improving their conductivity through several established mutations. In addition, the pharynx of C. elegans was modified to produce an optogenetically stimulated muscle pump that resembles mammalian cardiac muscle cells. In this work, both optoUNC-68 (optically excitable RyR) and SERCA/LOV2 were generated in different variants by CRISPR/Cas9 and plasmid-based genome editing to achieve light-driven manipulation of calcium homeostasis in C. elegans. Here, LICR was triggered by LOV2 domains in an opto-mechanical manipulation of RyR as well as SERCA. This approach was made possible by recently published high-resolution cryoEM structural images. In addition, alternative approaches using Ca2+ conductance-optimised channelrhodopsin variants were tested in C. elegans body wall muscle cells.
By inserting ChR-XXM into C. elegans and subsequent fluorescence microscopy of the co-introduced GFP, an expression in body wall muscle cells could be detected. Furthermore, in contraction assays, ChR-XXM was demonstrated to induce contractions of the animals of up to 16% compared to the original body length in both medium (0.8mW/mm²) and high (1.4mW/mm²) stimulation at 470nm. ChR-XXM was thus identified as an excellent candidate for the development of an optogenetic tool, as it exhibits significantly increased Ca2+ conductivity compared to other ChR2 variants.
The use of CRISPR/Cas9 to insert AsLOV2 domains (L404-L546) into different insertion sites of RyR allowed the generation of a transgenic strain of C. elegans that could be stimulated to elongate during 0.3mW/mm² photostimulation. This demonstrated that RyR can be manipulated by photostimulation, spatiotemporally through conformational changes in the LOV2 domain and the resulting disruption of the pore region.
The CRISPR/Cas9 method was also used to insert LOV2 domains into SERCA. Here it could be demonstrated that a conformational change of the LOV2 domains induced by photostimulation leads to a stop or impairment of Ca2+ ion translocation by SERCA from the cytosol into the SR/ER. In contrast to LOV2 in RyR, this resulted in a contraction of C. elegans body length.
The data presented here indicate that the intracellular Ca2+ cycle involving the SR/ER and cytosol can be successfully manipulated by the introduction of optogenetic tools. It turned out that the manipulation/impairment of individual components of this system, such as RyR or SERCA, is usually insufficient to achieve a clear response. Therefore, simultaneous manipulation of the two main actors RyR and SERCA is arguably the best way to take another step towards creating optogenetic tools for light-stimulated manipulation of Ca2+ release and reuptake from the SR/ER.
Aim: To evaluate the efficacy of different types of rehabilitation with fixed or removable full-arch implant-supported prosthesis designs in terms of implant loss and success in patients with at least one edentulous jaw, with tooth loss mainly due to periodontitis.
Materials and methods: Clinical studies with at least 12 months reporting on implant loss and implant success were searched. Meta-analysis was conducted to estimate cumulative implant loss considering different prostheses designs.
Results: A total of 11 studies with unclear to low risk of bias were included in the analysis. Estimated cumulative implant loss for fixed prostheses within 1 year and 5 years was 0.64% (95% confidence interval [CI]: 0.31%–1.31%) and 1.85% (95% CI: 0.85%–3.95%), respectively. The corresponding values for removable prostheses amounted to 0.71% (95% CI: 0.22%–2.28%) and 4.45% (95% CI: 2.48%–7.85%). Peri-implantitis affected 10%–50% of the patients restored with implant-supported fixed prostheses.
Conclusions: Based on the limited low-quality data, the present analysis points to a low and similar cumulative implant loss within 1 year for patients with tooth loss mainly due to stage IV periodontitis restored with either removable or fixed implant-supported full-arch prosthesis. At 5 years of functioning, there was a tendency for better outcomes using fixed designs.
Background: As a multi-targeted anti-angiogenic receptor tyrosine kinase (RTK) inhibitor sunitinib (SUN) has been established for renal cancer and gastrointestinal stromal tumors. In advanced refractory esophagogastric cancer patients, monotherapy with SUN was associated with good tolerability but limited tumor response.
Methods: This double-blind, placebo-controlled, multicenter, phase II clinical trial was conducted to evaluate the efficacy, safety and tolerability of SUN as an adjunct to second and third-line FOLFIRI (NCT01020630). Patients were randomized to receive 6-week cycles including FOLFIRI plus sodium folinate (Na-FOLFIRI) once every two weeks and SUN or placebo (PL) continuously for four weeks followed by a 2-week rest period. The primary study endpoint was progression-free survival (PFS). Preplanned serum analyses of VEGF-A, VEGF-D, VEGFR2 and SDF-1α were performed retrospectively.
Results: Overall, 91 patients were randomized, 45 in each group (one patient withdrew). The main grade ≥3 AEs were neutropenia and leucopenia, observed in 56 %/20 % and 27 %/16 % for FOLFIRI + SUN/FOLFIRI + PL, respectively. Median PFS was similar, 3.5 vs. 3.3 months (hazard ratio (HR) 1.11, 95 % CI 0.70–1.74, P = 0.66) for FOLFIRI + SUN vs. FOLFIRI + PL, respectively. For FOLFIRI + SUN, a trend towards longer median overall survival (OS) compared with placebo was observed (10.4 vs. 8.9 months, HR 0.82, 95 % CI 0.50–1.34, one-sided P = 0.21). In subgroup serum analyses, significant changes in VEGF-A (P = 0.017), VEGFR2 (P = 0.012) and VEGF-D (P < 0.001) serum levels were observed.
Conclusions: Although sunitinib combined with FOLFIRI did not improve PFS and response in chemotherapy-resistant gastric cancer, a trend towards better OS was observed. Further biomarker-driven studies with other anti-angiogenic RTK inhibitors are warranted.
Trial registration: This study was registered prospectively in the NCT Clinical Trials Registry (ClinicalTrials.gov) under NCT01020630 on November 23, 2009 after approval by the leading ethics committee of the Medical Association of Rhineland-Palatinate, Mainz, in coordination with the participating ethics committees (see Additional file 2) on September 16, 2009.