Refine
Document Type
- Article (29)
Has Fulltext
- yes (29)
Is part of the Bibliography
- no (29)
Keywords
- Dental implant (3)
- alveolar ridge augmentation (3)
- 3D printing (2)
- 3D rapid prototyping (2)
- Biopsy (2)
- Complication management (2)
- Fistula (2)
- Flaps (2)
- Grafts (2)
- Macrophage polarization (2)
Institute
- Medizin (28)
Simple Summary: Tooth roots are increasingly applied for bone reconstruction before implant placement. Growth factors stored in the dentin are assumed to enhance bone regeneration, however, the evidence is low. To this aim, collagen membranes were coated with dentin lysates obtained from extracted porcine teeth or remain untreated. The collagen membranes were tested for their capacity to stimulate bone formation in rat calvarial bone defects. After four weeks of healing, micro-computed tomography and histological analyses revealed that dentin lysates coating had no significant impact on the rather strong bone regeneration reaching a nearly complete defect closure even in untreated defects. It can thus be concluded that dentin lysates do not hinder bone regeneration. Conclusions concerning a possible stimulation of bone regeneration by dentin lysates should not be drawn.
Abstract: Autogenous tooth roots are increasingly applied as a grafting material in alveolar bone augmentation. Since tooth roots undergo creeping substitution similar to bone grafts, it can be hypothesized that osteoclasts release the growth factors stored in the dentin thereby influencing bone formation. To test this hypothesis, collagen membranes were either soaked in acid dentin lysates (ADL) from extracted porcine teeth or serum–free medium followed by lyophilization. Thereafter, these membranes covered standardized 5-mm-diameter critical-size defects in calvarial bone on rats. After four weeks of healing, micro-computed tomography and histological analyses using undecalcified thin ground sections were performed. Micro-computed tomography of the inner 4.5 mm calvaria defects revealed a median bone defect coverage of 91% (CI: 87–95) in the ADL group and 94% (CI: 65–100) in the control group, without significant differences between the groups (intergroup p > 0.05). Furthermore, bone volume (BV) was similar between ADL group (5.7 mm3, CI: 3.4–7.1) and control group (5.7 mm3, CI: 2.9–9.7). Histomorphometry of the defect area confirmed these findings with bone area values amounting to 2.1 mm2 (CI: 1.2–2.6) in the ADL group and 2.0 mm2 (CI: 1.1–3.0) in the control group. Together, these data suggest that acid dentin lysate lyophilized onto collagen membranes failed to modulate the robust bone formation when placed onto calvarial defects.
Dental clinics were suspected to be a hotspot for nosocomial transmission of coronavirus disease 19 (COVID-19), yet there has been no clear recommendation about emergency dental care and appropriate personal protective equipment during pandemics. In this paper, we aim to summarize recommendations for (i) patient risk assessment, (ii) patient triage, and (iii) measures to prevent infection of health professionals and nosocomial transmission in dental clinics. The available evidence was collected by performing searches on PubMed, Embase, and Cochrane databases. We reviewed papers on COVID-19, severe acute respiratory syndrome (SARS), Middle East respiratory syndrome (MERS), influenza, and related respiratory viral diseases. Legal and ethical frameworks, as well as international (e.g., World Health Organization (WHO)) and national (e.g., public health institutes, dental associations) guidelines were screened to summarize recommendations related to dental emergency care. To assess the patient risk, a questionnaire was developed to classify patients at unknown, high, and very high risk. Patient triage recommendations were summarized in a flow chart that graded the emergency level of treatments (i.e., urgent, as soon as possible, and postpone). Measures to prevent disease transmission based on current evidence were grouped for dental health professionals, dental clinics, and patients. The present recommendations may support health professionals implement preventative measures during the pandemic.
Background: To assess the influence of ridge preservation procedures on the healing of extraction sockets under antiresorptive therapy.
Material and Methods: A total of 10 Dutch Belted rabbits were randomly allocated to either the intravenous administration of amino‐bisphosphonate (zoledronic acid) (Za) (n = 5) or a negative control group (no Za [nZa]) (n = 5). At 6 months, the mandibular and maxillary molars were extracted and the four experimental sites randomly allocated to the following subgroups: (a) socket grafting using a collagen‐coated natural bone mineral (BOC) + primary wound closure, (b) coronectomy (CO), or (c) spontaneous healing + primary wound closure (SP). Za medication was continued for another 4 months. Histomorphometrical analyses considered, for example, crestal hard tissue closure of the extraction site (C) and mineralized tissue (MT) formation.
Results: Za‐SP was associated with an incomplete median C (31.76% vs 100% in nZa‐SP) and signs of bone arrosion along the confines of the socket. BOC had no major effects on increases in C and MT values in the Za group. CO commonly resulted in an encapsulation and partial replacement resorption of residual roots by MT without any histological signs of osteonecrosis.
Conclusions: (a) Za‐SP was commonly associated with a compromised socket healing and signs of osteonecrosis, (b) BOC had no major effect on socket healing in the Za group, and (c) CO at noninfected teeth might be a feasible measure for the prevention of a Za‐related osteonecrosis of the jaw.
Particulate autogenous tooth roots are used for alveolar bone augmentation surgery; however, dental plaque may provoke an inflammatory response that may counteract the desired graft consolidation process. Traditional mechanical cleaning of extracted teeth may be of support to lower a possible inflammatory response of the autograft. To test this assumption, extracted porcine teeth were left either uncleaned or underwent mechanical cleaning with a toothbrush and toothpaste before being fragmented and subjected to acid lysis, termed as unclean acid dentine lysate (ucADL) and clean acid dentine lysate (cADL), respectively. The inflammatory responses of murine macrophage RAW 264.7 cells being exposed to the respective acid dentine lysates were evaluated at the level of inflammatory gene expression and IL6 immunoassays. We report here that acid lysates obtained from uncleaned teeth provoked a robust increase in IL1β, IL6, and COX2 in RAW 264.7 cells. The mechanical removal of dental plaque significantly reduced the inflammatory response. Consistently, Limulus tests revealed that tooth cleaning lowers the presence of endotoxins in dentine lysates. To further prove the involvement of endotoxins, a toll-like receptor 4 (TLR4) inhibitor TAK242 was introduced. TAK242 abolished the inflammatory response provoked by acid lysates obtained from uncleaned teeth in RAW 264.7 cells. Moreover, nuclear translocation and phosphorylation of the TLR4 downstream NFκB-p65 were attenuated at the presence of cleaned versus uncleaned dentine lysates. Taken together, our data support the importance of dental plaque removal of teeth being extracted for alveolar bone augmentation surgery.
Objective: To assess the influence of biphasic calcium phosphate materials with different surface topographies on bone formation and osseointegration of titanium implants in standardized alveolar ridge defects.
Materials and methods: Standardized alveolar ridge defects (6 × 6 mm) were created in the mandible of 8 minipigs and filled with three biphasic calcium phosphate materials (BCP1–3, 90% tricalcium phosphate/10% hydroxyapatite) with different surface properties (micro- and macroporosities) as well as a bovine-derived natural bone mineral (NBM) as a control. At 12 weeks, implants were placed into the augmented defects. After further 8 weeks of healing, dissected blocks were processed for histological analysis (e.g., mineralized (MT), residual bone graft material (BS), bone-to-implant contact (BIC)).
Results: All four biomaterials showed well-integrated graft particles and new bone formation within the defect area. MT values were comparable in all groups. BS values were highest in the NBM group (21.25 ± 13.52%) and markedly reduced in the different BCP groups, reaching statistical significance at BCP1-treated sites (9.2 ± 3.28%). All test and control groups investigated revealed comparable and statistically not significant different BIC values, ranging from 73.38 ± 20.5% (BCP2) to 84.11 ± 7.84% (BCP1), respectively.
Conclusion* All bone graft materials facilitated new bone formation and osseointegration after 12 + 8 weeks of healing.
Purpose: To evaluate the efficacy of alternative or adjunctive measures to conventional non-surgical or surgical treatment of peri-implant mucositis and peri-implantitis.
Material and methods: Prospective randomized and nonrandomized controlled studies comparing alternative or adjunctive measures, and reporting on changes in bleeding scores (i.e., bleed0ing index (BI) or bleeding on probing (BOP)), probing depth (PD) values or suppuration (SUPP) were searched.
Results: Peri-implant mucositis: adjunctive use of local antiseptics lead to greater PD reduction (weighted mean difference (WMD) = − 0.23 mm; p = 0.03, respectively), whereas changes in BOP were comparable (WMD = − 5.30%; p = 0.29). Non-surgical treatment of peri-implantitis: alternative measures for biofilm removal and systemic antibiotics yielded higher BOP reduction (WMD = − 28.09%; p = 0.01 and WMD = − 17.35%; p = 0.01, respectively). Surgical non-reconstructive peri-implantitis treatment: WMD in PD amounted to − 1.11 mm favoring adjunctive implantoplasty (p = 0.02). Adjunctive reconstructive measures lead to significantly higher radiographic bone defect fill/reduction (WMD = 56.46%; p = 0.01 and WMD = − 1.47 mm; p = 0.01), PD (− 0.51 mm; p = 0.01) and lower soft-tissue recession (WMD = − 0.63 mm; p = 0.01), while changes in BOP were not significant (WMD = − 11.11%; p = 0.11).
Conclusions: Alternative and adjunctive measures provided no beneficial effect in resolving peri-implant mucositis, while alternative measures were superior in reducing BOP values following non-surgical treatment of peri-implantitis. Adjunctive reconstructive measures were beneficial regarding radiographic bone-defect fill/reduction, PD reduction and lower soft-tissue recession, although they did not improve the resolution of mucosal inflammation.
Background: The present study aimed to assess the three‐dimensional changes following soft tissue augmentation using free gingival grafts (FGG) at implant sites over a 3‐month follow‐up period.
Methods: This study included 12 patients exhibiting deficient keratinized tissue (KT) width (i.e., <2 mm) at the vestibular aspect of 19 implants who underwent soft tissue augmentation using FGG at second stage surgery following implant placement. Twelve implants were considered for the statistical analysis (n = 12). The region of interest (ROI) was intraorally scanned before surgery (S0), immediately post‐surgery (S1), 30 (S2) and 90 (S3) days after augmentation. Digital scanned files were used for quantification of FGG surface area (SA) and converted to standard tessellation language (STL) format for superimposition and evaluation of thickness changes between the corresponding time points. FGG shrinkage (%) in terms of SA and thickness was calculated between the assessed time points.
Results: Mean FGG SA amounted to 91 (95% CI: 63 to 119), 76.2 (95% CI: 45 to 106), and 61.3 (95% CI: 41 to 81) mm2 at S1, S2, and S3, respectively. Mean FGG SA shrinkage rate was 16.3% (95% CI: 3 to 29) from S1 to S2 and 33% (95% CI: 19 to 46) from S1 to S3. Mean thickness gain from baseline (S0) to S1, S2, and S3 was 1.31 (95% CI: 1.2 to 1.4), 0.82 (95% CI: 0.5 to 1.12), and 0.37 (0.21 to 0.5) mm, respectively. FGG thickness shrinkage was of 38% (95% CI: 17.6 to 58) from S1 to S2 and 71.8% (95% CI: 60 to 84) from S1 to S3. Dimensional changes from S1 to S3 were statistically significant, P <0.017. Soft tissue healing was uneventful in all patients.
Conclusions: The present three‐dimensional assessment suggests that FGG undergo significant dimensional changes in SA and thickness over a 3‐month healing period.
Background: Recent advances in 3D printing technology have enabled the emergence of new educational and clinical tools for medical professionals. This study provides an exemplary description of the fabrication of 3D‐printed individualised patient models and assesses their educational value compared to cadaveric models in oral and maxillofacial surgery.
Methods: A single‐stage, controlled cohort study was conducted within the context of a curricular course. A patient's CT scan was segmented into a stereolithographic model and then printed using a fused filament 3D printer. These individualised patient models were implemented and compared against cadaveric models in a curricular oral surgery hands‐on course. Students evaluated both models using a validated questionnaire. Additionally, a cost analysis for both models was carried out. P‐values were calculated using the Mann‐Whitney U test.
Results: Thirty‐eight fourth‐year dental students participated in the study. Overall, significant differences between the two models were found in the student assessment. Whilst the cadaveric models achieved better results in the haptic feedback of the soft tissue, the 3D‐printed individualised patient models were regarded significantly more realistic with regard to the anatomical correctness, the degree of freedom of movement and the operative simulation. At 3.46 € (compared to 6.51 €), the 3D‐printed patient individualised models were exceptionally cost‐efficient.
Conclusions: 3D‐printed patient individualised models presented a realistic alternative to cadaveric models in the undergraduate training of operational skills in oral and maxillofacial surgery. Whilst the 3D‐printed individualised patient models received positive feedback from students, some aspects of the model leave room for improvement.
After removal of a dental implant or extraction of a tooth in the upper jaw, the closure of an oroantral fistula (OAF) or oroantral communication (OAC) can be a difficult problem confronting the dentist and surgeon working in the oral and maxillofacial region. Oroantral communication (OAC) acts as a pathological pathway for bacteria and can cause infection of the antrum, which further obstructs the healing process as it is an unnatural communication between the oral cavity and the maxillary sinus. There are different ways to perform the surgical closure of the OAC. The decision-making in closure of oroantral communication and fistula is influenced by many factors. Consequently, it requires a combination of knowledge, experience, and information gathering. Previous narrative research has focused on assessments and comparisons of various surgical techniques for the closure of OAC/OAF. Thus, the decision-making process has not yet been described comprehensively.
The present study aims to illustrate all the factors that have to be considered in the management of OACs and OAFs that determine optimal treatment.