Refine
Year of publication
Document Type
- Preprint (537)
- Article (307)
- Conference Proceeding (12)
- Part of a Book (5)
- Report (3)
- Working Paper (1)
Has Fulltext
- yes (865)
Is part of the Bibliography
- no (865)
Keywords
- Heavy Ion Experiments (20)
- Hadron-Hadron scattering (experiments) (11)
- Hadron-Hadron Scattering (10)
- Heavy-ion collision (5)
- Jets (5)
- Collective Flow (4)
- Quark-Gluon Plasma (4)
- Europa (3)
- Hagen <2001> (3)
- Jets and Jet Substructure (3)
Institute
- Physik (851)
- Frankfurt Institute for Advanced Studies (FIAS) (762)
- Informatik (731)
- Neuere Philologien (10)
- Informatik und Mathematik (3)
- Geowissenschaften (2)
- Medizin (2)
- Hochschulrechenzentrum (1)
Results on the production of 4He and Image 1 nuclei in Pb–Pb collisions at √sNN=2.76TeV in the rapidity range |y|<1, using the ALICE detector, are presented in this paper. The rapidity densities corresponding to 0–10% central events are found to be dN/dyHe4=(0.8±0.4(stat)±0.3(syst))×10−6 and Image 2, respectively. This is in agreement with the statistical thermal model expectation assuming the same chemical freeze-out temperature (Tchem=156MeV) as for light hadrons. The measured ratio of Image 3 is 1.4±0.8(stat)±0.5(syst).
Transverse momentum (pT ) spectra of charged particles at mid-pseudorapidity in Xe–Xe collisions at √sNN=5.44TeV measured with the ALICE apparatus at the Large Hadron Collider are reported. The kinematic range 0.15<pT<50GeV/c and |η|<0.8 is covered. Results are presented in nine classes of collision centrality in the 0–80% range. For comparison, a pp reference at the collision energy of √s=5.44 TeV is obtained by interpolating between existing pp measurements at √s=5.02 and 7 TeV. The nuclear modification factors in central Xe–Xe collisions and Pb–Pb collisions at a similar center-of-mass energy of √sNN=5.02 TeV, and in addition at 2.76 TeV, at analogous ranges of charged particle multiplicity density 〈dNch/dη〉 show a remarkable similarity at pT>10 GeV/c. The centrality dependence of the ratio of the average transverse momentum 〈pT〉 in Xe–Xe collisions over Pb–Pb collision at √s=5.02 TeV is compared to hydrodynamical model calculations.
The production of prompt Λc+ baryons at midrapidity (|y|<0.5) was measured in central (0–10%) and mid-central (30–50%) Pb–Pb collisions at the center-of-mass energy per nucleon–nucleon pair √sNN=5.02 TeV with the ALICE detector. The results are more precise, more differential in centrality, and reach much lower transverse momentum (pT=1 GeV/c) with respect to previous measurements performed by the ALICE, STAR, and CMS Collaborations in nucleus–nucleus collisions, allowing for an extrapolation down to pT=0. The pT-differential Λc+/D0 ratio is enhanced with respect to the pp measurement for 4<pT<8 GeV/c by 3.7 standard deviations (σ), while the pT-integrated ratios are compatible within 1σ. The observed trend is similar to that observed in the strange sector for the Λ/KS0 ratio. Model calculations including coalescence or statistical hadronization for charm-hadron formation are compared with the data.
In quantum scattering processes between two particles, aspects characterizing the strong and Coulomb forces can be observed in kinematic distributions of the particle pairs. The sensitivity to the interaction potential reaches a maximum at low relative momentum and vanishing distance between the two particles. Ultrarelativistic heavy-ion collisions at the LHC provide an abundant source of many hadron species and can be employed as a measurement method of scattering parameters that is complementary to scattering experiments. This study confirms that momentum correlations of particles produced in Pb–Pb collisions at the LHC provide an accurate measurement of kaon–proton scattering parameters at low relative momentum, allowing precise access to the K−p→K−p process. This work also validates the femtoscopic measurement in ultrarelativistic heavy-ion collisions as an alternative to scattering experiments and a complementary tool to the study of exotic atoms with comparable precision. In this work, the first femtoscopic measurement of momentum correlations of K−p(K+p‾) and K+p(K−p‾) pairs in Pb–Pb collisions at centre-of-mass energy per nucleon pair of sNN=5.02 TeV registered by the ALICE experiment is reported. The components of the K−p complex scattering length are extracted and found to be ℜf0=−0.91±0.03(stat)−0.03+0.17(syst) and ℑf0=0.92±0.05(stat)−0.33+0.12(syst). The results are compared with chiral effective field theory predictions as well as with existing data from dedicated scattering and exotic kaonic atom experiments.
The measurement of the production of f0(980) in inelastic pp collisions at √s=5.02 TeV is presented. This is the first reported measurement of inclusive f0(980) yield at LHC energies. The production is measured at midrapidity, |y|<0.5, in a wide transverse momentum range, 0<pT<16 GeV/c, by reconstructing the resonance in the f0(980) →π+π− hadronic decay channel using the ALICE detector. The pT-differential yields are compared to those of pions, protons and ϕ mesons as well as to predictions from the HERWIG 7.2 QCD-inspired Monte Carlo event generator and calculations from a coalescence model that uses the AMPT model as an input. The ratio of the pT-integrated yield of f0(980) relative to pions is compared to measurements in e+e− and pp collisions at lower energies and predictions from statistical hadronisation models and HERWIG 7.2. A mild collision energy dependence of the f0(980) to pion production is observed in pp collisions from SPS to LHC energies. All considered models underpredict the pT-integrated 2f0(980)/(π+ +π−) ratio. The prediction from the canonical statistical hadronisation model assuming a zero total strangeness content of f0(980) is consistent with the data within 1.9σ and is the closest to the data. The results provide an essential reference for future measurements of the particle yield and nuclear modification in p–Pb and Pb–Pb collisions, which have been proposed to be instrumental to probe the elusive nature and quark composition of the f0(980) scalar meson.
In ultrarelativistic heavy-ion collisions, the event-by-event variation of the elliptic flow v2 reflects fluctuations in the shape of the initial state of the system. This allows to select events with the same centrality but different initial geometry. This selection technique, Event Shape Engineering, has been used in the analysis of charge-dependent two- and three-particle correlations in Pb–Pb collisions at √sNN=2.76 TeV. The two-particle correlator 〈cos(φα−φβ)〉, calculated for different combinations of charges α and β, is almost independent of v2 (for a given centrality), while the three-particle correlator 〈cos(φα+φβ−2Ψ2)〉 scales almost linearly both with the event v2 and charged-particle pseudorapidity density. The charge dependence of the three-particle correlator is often interpreted as evidence for the Chiral Magnetic Effect (CME), a parity violating effect of the strong interaction. However, its measured dependence on v2 points to a large non-CME contribution to the correlator. Comparing the results with Monte Carlo calculations including a magnetic field due to the spectators, the upper limit of the CME signal contribution to the three-particle correlator in the 10–50% centrality interval is found to be 26–33% at 95% confidence level.
The ALICE Collaboration reports the measurement of semi-inclusive distributions of charged-particle jets recoiling from a high-transverse momentum trigger hadron in p–Pb collisions at √sNN=5.02 TeV. Jets are reconstructed from charged-particle tracks using the anti-kT algorithm with resolution parameter R=0.2 and 0.4. A data-driven statistical approach is used to correct the uncorrelated background jet yield. Recoil jet distributions are reported for jet transverse momentum 15<pT,jetch<50GeV/c and are compared in various intervals of p–Pb event activity, based on charged-particle multiplicity and zero-degree neutral energy in the forward (Pb-going) direction. The semi-inclusive observable is self-normalized and such comparisons do not require the interpretation of p–Pb event activity in terms of collision geometry, in contrast to inclusive jet observables. These measurements provide new constraints on the magnitude of jet quenching in small systems at the LHC. In p–Pb collisions with high event activity, the average medium-induced out-of-cone energy transport for jets with R=0.4 and 15<pT,jetch<50GeV/c is measured to be less than 0.4 GeV/c at 90% confidence, which is over an order of magnitude smaller than a similar measurement for central Pb–Pb collisions at √sNN=2.76TeV. Comparison is made to theoretical calculations of jet quenching in small systems, and to inclusive jet measurements in p–Pb collisions selected by event activity at the LHC and in d–Au collisions at RHIC.
The production of muons from heavy-flavour hadron decays in p–Pb collisions at t √sNN=5.02 TeV was studied for 2<pT<16 GeV/c with the ALICE detector at the CERN LHC. The measurement was performed at forward (p-going direction) and backward (Pb-going direction) rapidity, in the ranges of rapidity in the centre-of-mass system (cms) 2.03<ycms<3.53 and −4.46<ycms<−2.96, respectively. The production cross sections and nuclear modification factors are presented as a function of transverse momentum (pT). At forward rapidity, the nuclear modification factor is compatible with unity while at backward rapidity, in the interval 2.5<pT<3.5 GeV/c, it is above unity by more than 2σ. The ratio of the forward-to-backward production cross sections is also measured in the overlapping interval 2.96<|ycms|<3.53 and is smaller than unity by 3.7σ in 2.5<pT<3.5 GeV/c. The data are described by model calculations including cold nuclear matter effects.
The production of prompt D0, Ds+, and Λc+ hadrons, and their ratios, Ds+/D0 and Λc+/D0, are measured in proton–proton collisions at √s=13 TeV at midrapidity (|y|<0.5) with the ALICE detector at the LHC. The measurements are performed as a function of the charm-hadron transverse momentum (pT) in intervals of charged-particle multiplicity, measured with two multiplicity estimators covering different pseudorapidity regions. While the strange to non-strange Ds+/D0 ratio indicates no significant multiplicity dependence, the baryon-to-meson pT-differential Λc+/D0 ratio shows a multiplicity-dependent enhancement, with a significance of 5.3σ for 1<pT<12 GeV/c, comparing the highest multiplicity interval with respect to the lowest one. The measurements are compared with a theoretical model that explains the multiplicity dependence by a canonical treatment of quantum charges in the statistical hadronisation approach, and with predictions from event generators that implement colour reconnection mechanisms beyond the leading colour approximation to model the hadronisation process. The Λc+/D0 ratios as a function of pT present a similar shape and magnitude as the Λ/KS0 ratios in comparable multiplicity intervals, suggesting a potential common mechanism for light- and charm-hadron formation, with analogous multiplicity dependence. The pT-integrated ratios, extrapolated down to pT=0, do not show a significant dependence on multiplicity within the uncertainties.
Fluctuation measurements are important sources of information on the mechanism of particle production at LHC energies. This article reports the first experimental results on third-order cumulants of the net-proton distributions in Pb–Pb collisions at a center-of-mass energy √sNN=5.02 TeV recorded by the ALICE detector. The results on the second-order cumulants of net-proton distributions at √sNN=2.76 and 5.02 TeV are also discussed in view of effects due to the global and local baryon number conservation. The results demonstrate the presence of long-range rapidity correlations between protons and antiprotons. Such correlations originate from the early phase of the collision. The experimental results are compared with HIJING and EPOS model calculations, and the dependence of the fluctuation measurements on the phase-space coverage is examined in the context of lattice quantum chromodynamics (LQCD) and hadron resonance gas (HRG) model estimations. The measured third-order cumulants are consistent with zero within experimental uncertainties of about 4% and are described well by LQCD and HRG predictions.
We present the first systematic comparison of the charged-particle pseudorapidity densities for three widely different collision systems, pp, pPb, and PbPb, at the top energy of the Large Hadron Collider (√sNN=5.02TeV) measured over a wide pseudorapidity range (−3.5<η<5), the widest possible among the four experiments at that facility. The systematic uncertainties are minimised since the measurements are recorded by the same experimental apparatus (ALICE). The distributions for pPb and PbPb collisions are determined as a function of the centrality of the collisions, while results from pp collisions are reported for inelastic events with at least one charged particle at midrapidity. The charged-particle pseudorapidity densities are, under simple and robust assumptions, transformed to charged-particle rapidity densities. This allows for the calculation and the presentation of the evolution of the width of the rapidity distributions and of a lower bound on the Bjorken energy density, as a function of the number of participants in all three collision systems. We find a decreasing width of the particle production, and roughly a smooth ten fold increase in the energy density, as the system size grows, which is consistent with a gradually higher dense phase of matter.
Correlations between moments of different flow coefficients are measured in Pb–Pb collisions at √sNN=5.02TeV recorded with the ALICE detector. These new measurements are based on multiparticle mixed harmonic cumulants calculated using charged particles in the pseudorapidity region |η| <0.8with the transverse momentum range 0.2 <pT<5.0GeV/c. The centrality dependence of correlations between two flow coefficients as well as the correlations between three flow coefficients, both in terms of their second moments, are shown. In addition, a collection of mixed harmonic cumulants involving higher moments of v2and v3is measured for the first time, where the characteristic signature of negative, positive and negative signs of four-, six-and eight-particle cumulants are observed, respectively. The measurements are compared to the hydrodynamic calculations using iEBE-VISHNU with AMPT and TRENTo initial conditions. It is shown that the measurements carried out using the LHC Run 2 data in 2015 have the precision to explore the details of initial-state fluctuations and probe the nonlinear hydrodynamic response of v2and v3to their corresponding initial anisotropy coefficients ε2and ε3. These new studies on correlations between three flow coefficients as well as correlations between higher moments of two different flow coefficients will pave the way to tighten constraints on initial-state models and help to extract precise information on the dynamic evolution of the hot and dense matter created in heavy-ion collisions at the LHC.
Measurements of (anti)proton, (anti)deuteron, and (anti)3He production in the rapidity range −1<y<0 as a function of the transverse momentum and event multiplicity in p-Pb collisions at a center-of-mass energy per nucleon-nucleon pair sNN−−−√=8.16 TeV are presented. The coalescence parameters B2 and B3, measured as a function of the transverse momentum per nucleon and of the mean charged-particle multiplicity density, confirm a smooth evolution from low to high multiplicity across different collision systems and energies. The ratios between (anti)deuteron and (anti)3He yields and those of (anti)protons are also reported as a function of the mean charged-particle multiplicity density. A comparison with the predictions of the statistical hadronization and coalescence models for different collision systems and center-of-mass energies favors the coalescence description for the deuteron-to-proton yield ratio with respect to the canonical statistical model.
This article presents the first measurement of the interaction between charm hadrons and nucleons. The two-particle momentum correlations of pD− and ¯pD+ pairs are measured by the ALICE Collaboration in high-multiplicity pp collisions at √s=13 TeV. The data are compatible with the Coulomb-only interaction hypothesis within (1.1–1.5)σ. The level of agreement slightly improves if an attractive nucleon (N)¯D strong interaction is considered, in contrast to most model predictions which suggest an overall repulsive interaction. This measurement allows for the first time an estimation of the 68% confidence level interval for the isospin I=0 inverse scattering length of the N¯D state f−10, I=0∈[−0.4,0.9] fm−1, assuming negligible interaction for the isospin I=1 channel.
The production of prompt Λ+c baryons at midrapidity (|y|<0.5) was measured in central (0-10%) and mid-central (30-50%) Pb-Pb collisions at the center-of-mass energy per nucleon-nucleon pair sNN−−−√=5.02 TeV with the ALICE detector. The Λ+c production yield, the Λ+c/D0 production ratio, and the Λ+c nuclear modification factor RAA are reported. The results are more precise and more differential in transverse momentum (pT) and centrality with respect to previous measurements. The Λ+c/D0 ratio, which is enhanced with respect to the pp measurement for 4<pT<8 GeV/c, is described by theoretical calculations that model the charm-quark transport in the quark-gluon plasma and include hadronization via both coalescence and fragmentation mechanisms.
Understanding the role of parton mass and Casimir colour factors in the quantum chromodynamics parton shower represents an important step in characterising the emission properties of heavy quarks. Recent experimental advances in jet substructure techniques have provided the opportunity to isolate and characterise gluon emissions from heavy quarks. In this work, the first direct experimental constraint on the charm-quark splitting function is presented, obtained via the measurement of the groomed shared momentum fraction of the first splitting in charm jets, tagged by a reconstructed D0 meson. The measurement is made in proton-proton collisions at s√ = 13 TeV, in the low jet transverse-momentum interval of 15≤pjet chT<30 GeV/c where the emission properties are sensitive to parton mass effects. In addition, the opening angle of the first perturbative emission of the charm quark, as well as the number of perturbative emissions it undergoes, is reported. Comparisons to measurements of an inclusive-jet sample show a steeper splitting function for charm quarks compared with gluons and light quarks. Charm quarks also undergo fewer perturbative emissions in the parton shower, with a reduced probability of large-angle emissions.
Understanding the role of parton mass and Casimir colour factors in the quantum chromodynamics parton shower represents an important step in characterising the emission properties of heavy quarks. Recent experimental advances in jet substructure techniques have provided the opportunity to isolate and characterise gluon emissions from heavy quarks. In this work, the first direct experimental constraint on the charm-quark splitting function is presented, obtained via the measurement of the groomed shared momentum fraction of the first splitting in charm jets, tagged by a reconstructed D0 meson. The measurement is made in proton-proton collisions at s√ = 13 TeV, in the low jet transverse-momentum interval of 15≤pjet chT<30 GeV/c where the emission properties are sensitive to parton mass effects. In addition, the opening angle of the first perturbative emission of the charm quark, as well as the number of perturbative emissions it undergoes, is reported. Comparisons to measurements of an inclusive-jet sample show a steeper splitting function for charm quarks compared with gluons and light quarks. Charm quarks also undergo fewer perturbative emissions in the parton shower, with a reduced probability of large-angle emissions.
Luminosity determination within the ALICE experiment is based on the measurement, in van der Meer scans, of the cross sections for visible processes involving one or more detectors (visible cross sections). In 2015 and 2018, the Large Hadron Collider provided Pb−Pb collisions at a centre-of-mass energy per nucleon pair of sNN−−−√=5.02 TeV. Two visible cross sections, associated with particle detection in the Zero Degree Calorimeter (ZDC) and in the V0 detector, were measured in a van der Meer scan. This article describes the experimental set-up and the analysis procedure, and presents the measurement results. The analysis involves a comprehensive study of beam-related effects and an improved fitting procedure, compared to previous ALICE studies, for the extraction of the visible cross section. The resulting uncertainty of both the ZDC-based and the V0-based luminosity measurement for the full sample is 2.5%. The inelastic cross section for hadronic interactions in Pb−Pb collisions at sNN−−−√=5.02 TeV, obtained by efficiency correction of the V0-based visible cross section, was measured to be 7.67±0.25 b, in agreement with predictions using the Glauber model.
Introduction: The German PID-NET registry was founded in 2009, serving as the first national registry of patients with primary immunodeficiencies (PID) in Germany. It is part of the European Society for Immunodeficiencies (ESID) registry. The primary purpose of the registry is to gather data on the epidemiology, diagnostic delay, diagnosis, and treatment of PIDs.
Methods: Clinical and laboratory data was collected from 2,453 patients from 36 German PID centres in an online registry. Data was analysed with the software Stata® and Excel.
Results: The minimum prevalence of PID in Germany is 2.72 per 100,000 inhabitants. Among patients aged 1–25, there was a clear predominance of males. The median age of living patients ranged between 7 and 40 years, depending on the respective PID. Predominantly antibody disorders were the most prevalent group with 57% of all 2,453 PID patients (including 728 CVID patients). A gene defect was identified in 36% of patients. Familial cases were observed in 21% of patients. The age of onset for presenting symptoms ranged from birth to late adulthood (range 0–88 years). Presenting symptoms comprised infections (74%) and immune dysregulation (22%). Ninety-three patients were diagnosed without prior clinical symptoms. Regarding the general and clinical diagnostic delay, no PID had undergone a slight decrease within the last decade. However, both, SCID and hyper IgE- syndrome showed a substantial improvement in shortening the time between onset of symptoms and genetic diagnosis. Regarding treatment, 49% of all patients received immunoglobulin G (IgG) substitution (70%—subcutaneous; 29%—intravenous; 1%—unknown). Three-hundred patients underwent at least one hematopoietic stem cell transplantation (HSCT). Five patients had gene therapy.
Conclusion: The German PID-NET registry is a precious tool for physicians, researchers, the pharmaceutical industry, politicians, and ultimately the patients, for whom the outcomes will eventually lead to a more timely diagnosis and better treatment.
To fulfil the requirements of ESS on beam transmission and emittance growth a detailed knowledge of the physics of beam formation as well as the interaction of the H- with the residual gas is substantial. Space charge compensated beam transport using solenoids for ion optics is in favour for the Low Energy Beam Transport (LEBT) between ion source and the first RFQ. Space charge compensation reduces the electrical self fields and beam radii and therefore emittance growth due to aberrations and redistribution. Transport of H- near the ion source is negatively influenced by the dipole fields required for beam extraction and e--dumping and the high gas pressure. The destruction of the rotational symmetry together with the space charge forces causes emittance growth and particle losses within the extraction system. High residual gas pressure near the extractor together with the high cross section for stripping will influence the transmission as well as space charge compensation. Therefore a detailed knowledge of the interaction of the residual gas with the beam and the influence of the external fields on the distribution of the compensation particles is necessary to reduce particle losses and emittance growth. Preliminary experiments using positive hydrogen ions for reference already show the influence of dipole fields on beam emittance. First measurements with H- confirm these results. Additional information on the interactions of the residual gas with the beam ions have been gained from the measurements using the momentum and energy analyser.
Investigation of the focus shift due to compensation process for low energy ion beam transport
(2000)
In magnetic Low Energy Beam Transport (LEBT) sections space charge compensation helps to enhance the transportable beam current and to reduce emittance growth due to space charge forces. For pulsed beams the time neccesary to establish space charge compensation is of great interest for beam transport. Particularly with regard to beam injection into the first accelerator section (e.g. RFQ) investigation of effects on shift of the beam focus due to space charge compensation are very important. The achieved results helps to obviate a mismatch into the first RFQ. To investigate the space charge compensation due to residual gas ionization, time resolved measurements using pulsed ion beams were performed at the LEBT system at the IAP and at the CEA-Saclay injektion line. A residual gas ion energy analyser (RGIA) equiped with a channeltron was used to measure the potential destribution as a function of time to estimate the rise time of compensation. For time resolved measurements (delta t min=50ns) of the radial density profile of the ion beam a CCD-camera was applied. The measured data were used in a numerical simulation of selfconsistant eqilibrium states of the beam plasma [1] to determine plasma parameters such as the density, the temperature, the kinetic and potential energy of the compensation electrons as a function of time. Measurements were done using focused proton beams (10keV, 2mA at IAP and 92keV, 62mA at CEA-Saclay) to get a better understanding of the influence of the compensation process. An interpretation of the acquired data and the achieved results will be presented.
High perveance negative ion beams with low emittance are essential for several next generation particle accelerators (i. g. spallation sources like ESS [1] and SNS [2]). The extraction and transport of these beams have intrinsic difficulties different from positive ion beams. Limitation of beam current and emittance growth have to be avoided. To fulfill the requirements of those projects a detailed knowledge of the physics of beam formation the interaction of the H- with the residual gas and transport is substantial. A compact cesium free H- volume source delivering a low energy high perveance beam (6.5 keV, 2.3 mA, perveance K= 0.0034) has been built to study the fundamental physics of beam transport and will be integrated into the existing LEBT section in the near future. First measurements of the interaction between the ion beam and the residual gas will be presented together with the experimental set up and preliminary results.
High perveance negative ion beams with low emittance are essential for several next generation particle accelerators (i. g. spallation sources like ESS [1] and SNS [2]). The extraction and transport of these beams have intrinsic difficulties different from positive ion beams. Limitation of beam current and emittance growth have to be avoided. To fulfill the requirements of those projects a detailed knowledge of the physics of beam formation the interaction of the H- with the residual gas and transport is substantial. A compact cesium free H- volume source delivering a low energy high perveance beam (6.5 keV, 2.3 mA, perveance K= 0.0034) has been built to study the fundamental physics of beam transport and will be integrated into the existing LEBT section in the near future. First measurements of the interaction between the ion beam and the residual gas will be presented together with the experimental set up and preliminary results.
The knowledge of the build up time of space charge compensation (SCC) and the investigation of the compensation process is of main interest for low energy beam transport of pulsed high perveance ion beams under space charge compensated conditions. To investigate experimentally the rise of compensation an LEBT system consisting of a pulsed ion source, two solenoids and a drift tube as diagnostic section has been set up. The beam potential has been measured time resolved by a residual gas ion energy analyser (RGA). A numerical simulation for the calculation of self-consistent equilibrium states of the beam plasma has been developed to determine plasma parameters which are difficult measure directly. The results of the simulation has been compared with the measured data to investigate the behavior of the compensation electrons as a function of time. The acquired data shows that the theoretical rise time of space charge compensation is by a factor of two shorter than the build up time determined experimentally. In view of description the process of SCC an interpretation of the gained results is given.
The determination of the beam emittance using conventional destructive methods suffers from two main disadvantages. The interaction between the ion beam and the measurement device produces a high amount of secondary particles. Those particles interact with the beam and can change the transport properties of the accelerator. Particularly in the low energy section of high current accelerators like proposed for IFMIF, heavy ion inertial fusion devices (HIDIF) and spallation sources (ESS, SNS) the power deposited on the emittance measurement device can lead to extensive heat on the detector itself and can destruct or at least dejust the device (slit or grit for example). CCD camera measurements of the incident light emitted from interaction of beam ions with residual gas are commonly used for determination of the beam emittance. Fast data acquisition and high time resolution are additional features of such a method. Therefore a matrix formalism is used to derive the emittance from the measured profile of the beam [1,2] which does not take space charge effects and emittance growth into account. A new method to derive the phase space distribution of the beam from a single CCD camera image using statistical numerical methods will be presented together with measurements. The results will be compared with measurements gained from a conventional Allison type (slit-slit) emittance measurement device.
For investigation of space charge compensation process due to residual gas ionization and the experimentally study of the rise of compensation, a Low Energy Beam Transport (LEBT) system consisting of an ion source, two solenoids, a decompensation electrode to generate a pulsed decompensated ion beam and a diagnostic section was set up. The potentials at the beam axis and the beam edge were ascertained from time resolved measurements by a residual gas ion energy analyzer. A numerical simulation of self-consistent equilibrium states of the beam plasma has been developed to determine plasma parameters which are difficult to measure directly. The temporal development of the kinetic and potential energy of the compensation electrons has been analyzed by using the numerically gained results of the simulation. To investigate the compensation process the distribution and the losses of the compensation electrons were studied as a function of time. The acquired data show that the theoretical estimated rise time of space charge compensation neglecting electron losses is shorter than the build up time determined experimentally. To describe the process of space charge compensation an interpretation of the achieved results is given.
A LEBT system consisting of an ion source, two solenoids, and a diagnostic section has been set up to investigate the space charge compensation process due to residual gas ionization [1] and to study experimentally the rise of compensation. To gain the radial beam potential distribution time resolved measurements of the residual gas ion energy distribution were carried out using a Hughes Rojanski analyzer [2,3]. To measure the radial density profile of the ion beam a CCD-camera performed time resolved measurements, which allow an estimation the rise time of compensation. Further the dynamic effect of the space charge compensation on the beam transport was shown. A numerical simulation under assumption of selfconsistent states [4] of the beam plasma has been used to determine plasma parameters such as the radial density profile and the temperature of the electrons. The acquired data show that the theoretical estimated rise time of space charge compensation neglecting electron losses is shorter than the build up time determined experimentally. An interpretation of the achieved results is given.
Influence of space charge fluctuations on the low energy beam transport of high current ion beams
(2000)
For future high current ion accelerators like SNS, ESS or IFMIF the beam behaviour in low energy beam transport sections is dominated by space charge forces. Therefore space charge fluctuations (e. g. source noise) can drastically influence the beam transport properties of the low energy beam transport section. Losses of beam ions and emittance growth are the most severe problems. For electrostatic transport systems either a LEBT design has to be found which is insensitive to variations of the space charge or the origin of the fluctuations has to be eliminated. For space charge compensated transport as proposed for ESS and IFMIF the situation is different: No major influence on beam transport is expected for fluctuations below a cut-off frequency given by the production rate of the compensation particles. Above this frequency the fluctuations can not be compensated by particle production alone, but redistributions of the compensation particles helps to compensate the influence of the fluctuations. Above a second cut-off frequency given by the density and the temperature of the compensation particles their redistribution is too slow to reduce the influence of the space charge fluctuations. Transport simulations for the IFMIF injector including space charge fluctuations will be presented together with a determination of the cut-off frequencies. The results will be compared with measurements of the rise time of space charge compensation.
Accelerator Driven Systems (ADS) are promising tools for the efficient transmutation of nuclear waste products in dedicated industrial installations, called transmuters. The Myrrha project at Mol, Belgium, placed itself on the path towards these applications with a multipurpose and versatile system based on a liquid PbBi (LBE) cooled fast reactor (80 MWth) which may be operated in both critical and subcritical modes. In the latter case the core is fed by spallation neutrons obtained from a 600 MeV proton beam hitting the LBE coolant/target. The accelerator providing this beam is a high intensity CW superconducting linac which is laid out for the highest achievable reliability. The combination of a parallel redundant and of a fault tolerant scheme should allow obtaining an MTBF value in excess of 250 hours that is required for optimal integrity and successful operation of the ADS. Myrrha is expected to be operational in 2023. The forthcoming 4-year period is fully dedicated to R&D activities, and in the field of the accelerator they are strongly focused on the reliability aspects and on the proper shaping of the beam trip spectrum.
The crossbar-H-mode (CH) structure is the first superconducting multicell drift tube cavity for the low and medium energy range operated in the H21 mode. Because of the large energy gain per cavity, which leads to high real estate gradients, it is an excellent candidate for the efficient acceleration in high power proton and ion accelerators with fixed velocity profile. A prototype cavity has been developed and tested successfully with a gradient of 7MV/m. A few new superconducting CH cavities with improved geometries for different high power applications are under development at present. One cavity (f=325 MHz, β=0.16, seven cells) is currently under construction and studied with respect to a possible upgrade option for the GSI UNILAC. Another cavity (f=217 MHz, β=0.059, 15 cells) is designed for a cw operated energy variable heavy ion linac application. Furthermore, the EUROTRANS project (European research program for the transmutation of high level nuclear waste in an accelerator driven system, 600 MeV protons, 352 MHz) is one of many possible applications for this kind of superconducting rf cavity. In this context a layout of the 17 MeV EUROTRANS injector containing four superconducting CH cavities was proposed by the Institute for Applied Physics (IAP) Frankfurt. The status of the cavity development related to the EUROTRANS injector is presented.
As the successor of the EUROTRANS project, the MAX project is aiming to continue the R&D effects for a European Accelerator-Driven System and to bring the conceptual design to reality. The layout of the driver linac for MAX will follow the reference design made for the XT-ADS phase of the EUROTRANS project. For the injector part, new design strategies and approaches, e.g. half resonant frequency, half transition-energy between the RFQ and the CH-DTL, and using the 4-rod RFQ structure instead of the originally proposed 4-vane RFQ, have been conceived and studied to reach a more reliable CW operation at reduced costs. In this paper, the design and simulation results of the MAX injector are presented.
The MYRRHA Project (Multi Purpose Hybrid Reactor for High Tech Applications) at Mol/belgium will be a user facility with emphasis on research with neutron generated by a spallation source. One main aspect is the demonstration of nuclear waste technology using an accelerator driven system. A superconducting linac delivers a 4 mA, 600 MeV proton beam. The first accelerating section is covered by the 17 MeV injector. It consists of a proton source, an RFQ, two room temperature CH cavities and 4 superconducting CH-cavities. The initial design has used an RF frequency of 352 MHz. Recently the frequency of the injector has been set to 176 MHz. The main reason is the possible use of a 4-rod-RFQ with reduced power dissipation and energy, respectively. The status of the overall injector layout including cavity design is presented.
EUROTRANS is a European research program for the transmutation of high level nuclear waste in an accelerator-driven system (ADS). As proposed, the driver linac needs to deliver a 2.5–4 mA, 600 MeV continuous-wave (CW) proton beam and later a 20 mA, 800 MeV one to the spallation target in the prototype-scale and industrial-scale demonstration phases, respectively. This paper is focusing on the conceptual studies performed with respect to the 17 MeV injector. First, the special beam dynamics strategies and methods, which have been developed and applied to design a current-variable injector up to 30 mA for allowing an easy upgrade without additional R&D costs, will be introduced. Then the error study made for evaluating the tolerance limits of the designed injector will be presented as well.
MYRRHA is conceived as an accelerator driven system (ADS) for transmutation of high level nuclear waste. The neutron source is created by coupling a proton accelerator of 600 MeV with a 4 mA proton beam, a spallation source and a sub-critical core. The IAP of Frankfurt University is responsible for the development of the 17 MeV injector operated at 176 MHz. The injector consists of a 1.5 MeV 4-Rod-RFQ and six CH-drifttube-structures. The first two CH-structures will be operated at room temperature and the other CH-structures are superconducting cavities assembled in one cryo-module. To achieve the extremely high reliability required by the ADS application, the design of the 17 MeV injector has been intensively studied, with respect to thermal issues, minimum peak fields and field distribution.
Metasomatic reaction zones between mafic and ultramafic rocks exhumed from subduction zones provide a window into mass-transfer processes at high pressure. However, accurate interpretation of the rock record requires distinguishing high-pressure metasomatic processes from inherited oceanic signatures prior to subduction. We integrated constraints from bulk-rock geochemical compositions and petrophysical properties, mineral chemistry, and thermodynamic modeling to understand the formation of reaction zones between juxtaposed metagabbro and serpentinite as exemplified by the Voltri Massif (Ligurian Alps, Italy). Distinct zones of variably metasomatized metagabbro are dominated by chlorite, amphibole, clinopyroxene, epidote, rutile, ilmenite, and titanite between serpentinite and eclogitic metagabbro. Whereas the precursor serpentinite and oxide gabbro formed and were likely already in contact in an oceanic setting, the reaction zones formed by diffusional Mg-metasomatism between the two rocks from prograde to peak, to retrograde conditions in a subduction zone. Metasomatism of mafic rocks by Mg-rich fluids that previously equilibrated with serpentinite could be widespread along the subduction interface, within the subducted slab, and the mantle wedge. Furthermore, the models predict that talc formation by Si-metasomatism of serpentinite in subduction zones is limited by pressure-dependent increase in the silica activity buffered by the serpentine-talc equilibrium. Elevated activities of aqueous Ca and Al species would also favor the formation of chlorite and garnet. Accordingly, unusual conditions or processes would be required to stabilize abundant talc at high P-T conditions. Alternatively, a different set of mineral assemblages, such as serpentine- or chlorite-rich rocks, may be controlling the coupling-decoupling transition of the plate interface.
Talc formation via silica-metasomatism of ultramafic rocks is believed to play key roles in subduction zone processes. Yet, the conditions of talc formation remain poorly constrained. We used thermodynamic reaction-path models to assess the formation of talc at the slab-mantle interface and show that it is restricted to a limited set of pressure–temperature conditions, protolith, and fluid compositions. In contrast, our models predict that chlorite formation is ubiquitous at conditions relevant to the slab-mantle interface of subduction zones. The scarcity of talc and abundance of chlorite is evident in the rock record of exhumed subduction zone terranes. Talc formation during Si-metasomatism may thus play a more limited role in volatile cycling, strain localization, and in controlling the decoupling-coupling transition of the plate interface. Conversely, the observed and predicted ubiquity of chlorite corroborates its prominent role in slab-mantle interface processes that previous studies attributed to talc.
Key Points:
Limited talc formation by Si-metasomatism of ultramafic rocks in subduction zones
Chlorite formation is likely pervasive at the slab-mantle interface
Preferential formation of chlorite has wide-ranging chemical and physical implications for subduction zone processes
Plain Language Summary: In subduction zones, talc can form during chemical reactions of mantle rocks with silica-enriched fluids at the interface between descending oceanic plates and the overriding mantle. Its formation and distribution in subduction zones are believed to affect the volatile budget, rheological properties, and the down-dip limit of the decoupling of the slab-mantle interface. Therefore, illuminating the conditions that facilitate talc formation at high pressure-temperature conditions is key in assessing its roles in fundamental subduction zone processes. Using thermodynamic reaction-path models, we show that the formation of talc at the slab-mantle interface is restricted to a limited set of environmental conditions, because its formation is highly sensitive to the compositions of the mantle rocks and reactant fluids. Contrary to common belief, talc is unlikely to form in high abundance in ultramafic rocks metasomatized by Si-rich slab-derived fluids. Rather, our models predict the ubiquitous formation of chlorite along with other silicate minerals during Si-metasomatism due to the competing effects from other dissolved components that favor their formation over talc. This study calls into question the importance of talc during Si-metasomatism in subduction zones but highlights the more predominant role of chlorite.
Le concept d’eurocompréhension signifie intercompréhension dans les trois grands groupes linguistiques européens, à savoir les langues romanes, slaves et germaniques. Il s’agit, en respectant les objectifs1 de la politique linguistique de l’Union Européenne, de parvenir de façon modulaire au plurilinguisme par le biais de compétences réceptives. Dans ce cadre, les recherches linguistiques effectuées sur l’intercompréhension fournissent les bases de transfert interlangues pour l’exploitation cognitive de la parenté entre les langues des groupes différents. ...
A new method of measuring quality factors in cavities is presented. This method is well suited to measure quality factors in undamped cavities as well as in heavily damped cavities, and in addition this method provides a possibility of separating modes and measuring quality factors especially in cases of overlapping modes. Measurements have been carried out on HOM-damped cavities for the DESY/THD linear collider project. Results are presented.
Plus de la moitié des Européens de l’U.E. parlent une langue romane comme langue maternelle. Parmi les autres Européens, l’apprentissage de langues romanes comme langue étrangère est très fréquent, il n’est dépassé que par l’anglais: Une «Romanophonie» pourrait s’appuyer donc sur une base large, tandis que ses valeurs intercompréhensives ne sont pas encore suffisamment mises à la disposition d’un publique européen. Au contraire: les nations créent de plus en plus des barrières entre les langues romanes en institutionnalisant les différences et non pas ce qu’elles ont en commun. En Allemagne où l’on trouve encore la philologie romane (Romanische Philologie) comme unité d’études on peut observer en même temps une tendance vers une spécialisation en études unilingues (Einzelphilologien). Un tel séparatisme linguistique à l’intérieur d’une seule famille renonce aux avantages intercommunicatifs et intercompréhensifs offerts par les langues romanes. Le phénomène de l’intercompréhension est largement connu, pas seulement parmi les romanistes. C’est le résultat d’une tradition de l’écrit et d’un héritage culturel - une partie importante de l’unité intellectuelle du continent européen - qui rend les langues romanes si accessibles. ...
Determination of field strength and quality factor of heavily HOM damped accelerator cavities
(1992)
Two methods of of measuring field strength in accelerator cavities, heavily damped with respect to higher order modes (HOM), are presented. From the results of the field measurements the coupling (damping) factor and thus the quality factor of the damped resonator can be derived. Measurements of a pillbox resonator with heavily damped TM110-mode (Q < 20) demonstrate the usefulness of the techniques presented, even in this extreme range.
Damping cells for the higher order modes are necessary for the S-band linear collider to minimize BBU (Beam-Break-Up). The construction of the damper cells has to take into account the different field geometries of the higher order modes. So two different types of dampers have been designed: a wall slotted an an iris slotted cell. In order to optimize the two types of damping cells with respect to damping strength, impedance matching between coupling system and waveguide dampers and between damping cell and undamped cells and the tuning system, damping cells of both types have been built and examinated.
Das Neldophon gehört mittlerweile zum internationalen Wortschatz Europas. Neldophonieren ist heute alltägliche Praxis. Die Globalisierung des ausgehenden zweiten Jahrtausends setzt die Entwicklung der Neldophonie voraus, um idealtypisch in naher Zukunft von jedem Punkt der Erde aus mit jedem beliebigen anderen Punkt in neldophonischer Verbindung zu sein. Eurosemantische Gemeinsamkeiten des Neldophonierens und die außersprachliche Partizipiation an der entsprechenden Technologie erleichterten die Akzeptanz des Terminus in den romanischen (und anderen) Sprachen Europas und der Welt trotz des Unikalmorphems Neldo-(vergleichbar mit Him- und Brom- in Him-, bzw. Brombeere) in Verbindung mit dem ansonsten global in verschiedenen Graphien verbreiteten Restmorphem -phon. Wörter haben ihre Geschichte. Der Ausdruck läßt sich auf seinen etymologischen Entstehungsort, den Congrés Europeu sobre Planificació Lingüística (Barcelona 9.-10. November 1995) zurückführen, andem auch der Gründer der FFM teilnahm. Offensichtlich wurde der Terminus hier in internationaler Umgebung erstmalig geprägt und sogleich panromanisch umgesetzt. Die barceloniner Gastgeber sprachen von neldòfon, während hingegen die wenigen Hispanophonen neldófono bevorzugten. Das Verbum neldofonar ist in der Zwischenzeit auch im Portugiesischen belegt, die Académie française wird sich kaum einer Äußerung enthalten können, ob neldophoner oder neldofoner (da offensichtlich im katalanischen Sprachbereich entstanden) die normgerechte Graphie repräsentiere, während Italien den europäischen Neologismus seit dem Herbst 1995 bereits kennt (chiamami più tardi al neldefono) und - zu Recht? - das etymologische ius primi loci beansprucht. In Rumänien erhielt das Verb eine systemimanente Stammerweiterung (Petre neldofoneazã mult) seit 1996. Nach zuverlässigen Quellen (Jernudd 1995) trat der Terminus Ende 1995 in seiner englischen Variante in Honkong in Kontakt mit dem Kantonesischen. Sein Überleben scheint jedoch hier (nach 1997) insbesondere wegen der phonologischen Problematik des liquiden Auslauts der Silbe nel- und diverser noch zu erwartender sprachpolitischer Konflikte nicht gesichert. Da die europäischen Neldophone in USA noch nicht funktionieren, ist eine gewisse Skepsis für den terminologischen Siegeszug der Neldophonie im Amerikanischen Englisch nicht unangebracht. ...
Rezeptive Mehrsprachigkeit ist eine der jüngsten Forderungen der EU-Kommission zum Erreichen einer realistischen Mehrsprachigkeit in Europa. Die maximalistischen Forderungen nach Perfektion in allen sprachlichen Kompetenzen haben sich in den nationalen Unterrichtswesen als illusionär erwiesen, da diese nirgendwo von statistisch nachvollziehbarem Erfolg gekrönt sind. Die sprachliche Diversität im multilingualen Europa findet sich nicht in der Realität der Bildungssysteme wieder. Zwar verfügen heute europaweit 26 % der Europäer über eine zweite und 8% über eine dritte Fremdsprache, in den einzelnen Ländern sieht es jedoch oft desolat aus. Während in den kleineren Unionsländern kaum jemand als nur monolingual gilt (Luxemburg 2%) ist die Krankheit der Einsprachigkeit in den großen EU-Staaten seuchenhaft verbreitet, etwa Großbritannien mit 66%. Dies hat in den neunziger Jahren in der Kommission zu den Postulaten geführt, die sich die Forschergruppe EuroCom als Programm gesetzt hat, nämlich Mehrsprachigkeit über den Einstieg in rezeptive Kompetenzen modularisiert und kognitiv über Transferbasen innerhalb von Sprachfamilien zu erreichen. EuroCom steht dabei als Kürzel für Eurocomprehension, ein Akronym für Europäische Interkomprehension in den drei großen Sprachengruppen Europas, der romanischen, slawischen und germanischen. Die Beschränkung auf rezeptive Kompetenzen ist dabei nur ein methodisches Ausgangsprinzip, das es ermöglicht, Mehrsprachigkeit besonders schnell über das Leseverständnis zu erreichen und modularisiert auf Hörverständnis und aktive Sprechkompetenz sukzessiv auszuweiten. Die Methode EuroCom arbeitet über die Aktivierung intralingualen Wissens mit linguistischem Transfermaterial in nahverwandten Sprachen, das als kognitives Potential den Erschließungsprozess optimiert und in kürzester Zeit ein Lese- und Hörverstehen in einer ganzen Sprachenfamilie erreichbar macht. ...
Accelerating cavities exchange HOM power through interconnecting beam pipes in case of signal frequencies above the cut-off of their propagating waveguide modes. This may lead either to improved HOM damping or - in the case most severe - to unwanted phase coherence of fields to the beam. Therefore the knowledge of the scattering properties of a cavity as a line element is needed to analyse all kinds of RF cavity-cavity interaction. Since there is a lack of measurement tools capable to provide a multidimensional scattering matrix at a given frequency point, we have been developing a method for this purpose. It uses a set of 2-port S-parameters of the device under test, embedded in a number of geometrically different RF environments. The application of the method is demonstrated with copper models of TESLA cavities.
Für Romanisten ist Interkomprehension seit der Begründung ihrer Disziplin ein Anliegen, für romanischsprachige Menschen ist sie meist ein persönliches Erlebnis der partiellen Entdeckung, vor 1500 Jahren war sie alltägliche Realität. Es geht um die Fähigkeit, in einer Gruppe von Sprachen, die einen gemeinsamen Ursprung haben, kommunizieren zu können.
Läßt man die Problematik der bei dieser Aussage verwendeten Ausdrücke außer Betracht und schränkt den Blickwinkel auf die Gruppe der romanischen Sprachen ein, so lassen sich eine Reihe von Aussagen über Interkomprehension machen.
Daß zwischen dem sechsten und achten Jahrhundert, also während der protoromanischen Phase, Interkomprehension zwischen entfernten Gegenden des niedergegangen Imperium Romanum möglich war, ist unstrittig, freilich gab es keine außersprachlichen Gründe, die das Faktum Interkomprehension in den Vordergrund hätten rücken können. Die einzig übriggebliebene Zentralmacht Kirche benutzte ihr eigenes Latein. ...
Der sprachfamilienbezogene Erwerb einer L3 bis Lx hat durch die jüngeren sprachpolitischen Forderungen der Europäischen Kommission 1997 entscheidenden Auftrieb erhalten. Im Livre Blanc sur l´éducation et la formation von 1995 bilanziert die Europäische Kommission das Ergebnis der fremdsprachlichen Bemühungen der großen Flächenstaaten der Union als eher kümmerlich und fordert eine Wende. Künftig soll eine Europäische Mehrsprachigkeit drei Perspektiven aufweisen: eine differenzierte Betrachtung von Kompetenzen (rezeptive Mehrsprachigkeit), die Ermöglichung des gezielten Erwerbs von Teilkompetenzen mit modularen Aufbaumöglichkeiten (fachsprachlicher approach zur rezeptiven Lesekompetenz) und das Nutzen der Verwandtschaftsbeziehungen zwischen Sprachen (u.a. romanische Interkomprehensionsforschung). Diese drei Perspektiven werden in dem dreigliedrigen Projekt zur "Eurocomprehension" der Universität Frankfurt zusammengefaßt. Der Frankfurter Beitrag bezieht sich auf die Gruppe der romanischen Sprachen. ...