Refine
Document Type
- Conference Proceeding (2)
- Doctoral Thesis (1)
Language
- English (3)
Has Fulltext
- yes (3)
Is part of the Bibliography
- no (3)
Institute
- Physik (3)
Within this thesis, the mechanical integration of the Micro Vertex Detector (MVD) of the Compressed Baryonic Matter (CBM) experiment is developed. The CBM experiment, which is being set up at the future FAIR facility, aims to investigate the phase diagram of strongly interacting matter in the regime of high net-baryon densities and moderate temperatures. Heavy-ion collisions at beam energies in the range of 2 to 45 AGeV, complemented by results from elementary reactions, will allow access to these conditions. The experiments conducted at LHC (CERN, Switzerland) and at RHIC (BNL, USA = does not apply within the Beam Energy Scan program) so far focus on the investigation of the phase diagram in the regime of high temperatures and vanishing net-baryon densities. The high beam intensities provided by FAIR will enable CBM to focus its experimental program on systematical studies of rare particles. Among other particle species, open charm-carrying particles are one of the most promising observables to investigate the medium created in heavy-ion collisions since their charm quarks are exposed to the medium and traverse its whole evolution. The fact that the decay particles of these rare observables are also produced abundantly in direct processes in heavy-ion collisions results in a huge combinatorial background which attributes specific requirements to the detector systems. The call for a high interaction rate leads to a cutting-edge detector system which provides an excellent spatial resolution, thin detector stations and the capability to cope with the induced radiation as well as the high rate of traversing particles and the resulting track density. The required demands are to be implemented by the MVD which will be equipped with four planar stations positioned at 50, 100, 150 and 200 mm downstream the target. The geometrical acceptance, which has to be covered with charge-sensitive material, is defined according to the requirements of CBM in the polar angle range of [2.5°; 25°]. The MVD stations have to contribute as little as possible to the overall material budget. The expected beam intensity and the vicinity close to the target require silicon detectors that provide a hardness against non-ionizing radiation of more than 10^13 n_eq/cm² and against ionizing radiation of more than 1 Mrad. In addition, the read-out time of the sensors has to be as short as possible to avoid potential ambiguities in the particle tracking caused by the pile-up of hits having emerged from different collisions. For the time being, Monolithic Active Pixel Sensors (MAPS) offer the optimal choice of technology required to address the physics program of CBM with respect to the spectroscopy of open charm and di-electrons. The geometrical properties of these sensors define the layout of the detector. To limit the multiple scattering of the produced particles inside the geometrical acceptance, the sensors and the MVD have to operate in a moderate vacuum. The sensors are thinned down to a thickness of 50 µm and, to achieve a maximum polar angle coverage, they are glued onto both sides of dedicated thin carriers. These carriers, which are made of highly thermally conductive materials such as CVD diamond or encapsulated TPG, allow efficient extraction of the power produced in the sensors. This enables their operation at temperatures well below 0 °C as suggested by corresponding radiation hardness studies. Dedicated actively cooled aluminum-based heat sinks are positioned outside of the acceptance to dissipate the heat produced by the sensors and the front-end electronics. The design of the MVD, including the realistic thicknesses of the integrated materials, has been developed and refined in the context of this thesis. It has been transformed into a unique software model which is used to simulate and further optimize the mechanical and thermal properties of the MVD, as well as in sophisticated physics simulations. The model allowed evaluation of the material budget of each individual MVD station in its geometrical acceptance. The calculated averaged material budget values stay well below the material budget target values demanded by the physics cases. The thermal management of the MVD has been simulated on the level of a quadrant of each MVD station – four identically constructed quadrants are forming an MVD station – taking into account material properties of the sensors, the glue and the sensor carrier. The temperature gradients across the pixels of a given sensor area in the direction of the rows and columns were found to be in an acceptable range of below 5 K. A temperature difference between the thermal interface area and the maximum sensor temperature of dT = 5 K on the first and a value of dT = 40 K on the fourth MVD station has been thermally simulated assuming a sensor power dissipation of 0.35 W/cm², highlighting the need to optimize the thermal interface between the involved materials as well as the power dissipation of the sensors. The feasibility of several key aspects required for the construction phase of the MVD has been investigated within the MVD Prototype project. The construction of the MVD Prototype allowed evaluation, testing and validation of the handling and the double-sided integration of ultra-thin sensors – the required working steps for their integration have been specified, evaluated and successfully established – as well as their operation in the laboratory and during a concluding in-beam test using high-energetic pions provided by the CERN-SPS. The thermal characterization of the MVD Prototype during its operation – in a temperature range from [5 °C; 25 °C], not in vacuum – confirmed the corresponding thermal simulations conducted during its design phase and substantiated the results of the thermal simulations for the design of the MVD. The aim of a material budget value of only x/X_0 ~ 0.3% for the MVD Prototype has been accomplished. Analyzing the in-beam data, the nominal sensor performance parameters were successfully reproduced, demonstrating that the proposed integration process does not impair the sensors’ performance. Moreover, no evidence of potential impact on the sensors’ performance arising from mechanical weaknesses of the MVD Prototype mechanics has been found within the analyzed data. Based on the MVD Prototype and the simulations of the material budget as well as the thermal management, this thesis evaluated the work packages, procedures and quality assurance parameters needed to set up the starting version of the MVD and addressed open questions as well as critical procedures to be studied prior to the production phase of the detector, emphasizing the evaluation of the cooling concept in vacuum and the integration of sensors in ladder structures on both sides of the quadrants of the MVD stations.
The CBM experiment will investigate heavy-ion collisions at beam energies from 8 to 45 AGeV at the future accelerator facility FAIR. The goal of the experiment is to study the QCD phase diagram in the vincinity of the QCD critical point. To do so, CBM aims at measuring rare probes among them open charm. In order to identify those rare and short lived particles despite the rich combinatorial background generated in heavy ion collisions, a micro vertex detector (MVD) providing an unprecedented combination of high rate capability and radiation hardness, very light material budget and excellent granularity is required. In this work, we will discuss the concept of this detector and summarize the status of the R&D.
CMOS sensors are the most promising candidates for the Micro-Vertex-Detector (MVD) of the CBM experiment at GSI, as they provide an unprecedented compromise between spatial resolution, low material budget, adequate radiation tolerance and readout speed. To study the integration of these sensors into a detector module, a so-called MVD-demonstrator has been developed. The demonstrator and its in-beam performance will be presented and discussed in this work.